|  | /* | 
|  | * Copyright IBM Corp. 2007, 2009 | 
|  | * | 
|  | * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>, | 
|  | *	      Peter Oberparleiter <peter.oberparleiter@de.ibm.com> | 
|  | */ | 
|  |  | 
|  | #define KMSG_COMPONENT "sclp_cmd" | 
|  | #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt | 
|  |  | 
|  | #include <linux/completion.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/mmzone.h> | 
|  | #include <linux/memory.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <asm/chpid.h> | 
|  | #include <asm/sclp.h> | 
|  | #include <asm/setup.h> | 
|  |  | 
|  | #include "sclp.h" | 
|  |  | 
|  | #define SCLP_CMDW_READ_SCP_INFO		0x00020001 | 
|  | #define SCLP_CMDW_READ_SCP_INFO_FORCED	0x00120001 | 
|  |  | 
|  | struct read_info_sccb { | 
|  | struct	sccb_header header;	/* 0-7 */ | 
|  | u16	rnmax;			/* 8-9 */ | 
|  | u8	rnsize;			/* 10 */ | 
|  | u8	_reserved0[24 - 11];	/* 11-15 */ | 
|  | u8	loadparm[8];		/* 24-31 */ | 
|  | u8	_reserved1[48 - 32];	/* 32-47 */ | 
|  | u64	facilities;		/* 48-55 */ | 
|  | u8	_reserved2[84 - 56];	/* 56-83 */ | 
|  | u8	fac84;			/* 84 */ | 
|  | u8	_reserved3[91 - 85];	/* 85-90 */ | 
|  | u8	flags;			/* 91 */ | 
|  | u8	_reserved4[100 - 92];	/* 92-99 */ | 
|  | u32	rnsize2;		/* 100-103 */ | 
|  | u64	rnmax2;			/* 104-111 */ | 
|  | u8	_reserved5[4096 - 112];	/* 112-4095 */ | 
|  | } __attribute__((packed, aligned(PAGE_SIZE))); | 
|  |  | 
|  | static struct read_info_sccb __initdata early_read_info_sccb; | 
|  | static int __initdata early_read_info_sccb_valid; | 
|  |  | 
|  | u64 sclp_facilities; | 
|  | static u8 sclp_fac84; | 
|  | static unsigned long long rzm; | 
|  | static unsigned long long rnmax; | 
|  |  | 
|  | static int __init sclp_cmd_sync_early(sclp_cmdw_t cmd, void *sccb) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | __ctl_set_bit(0, 9); | 
|  | rc = sclp_service_call(cmd, sccb); | 
|  | if (rc) | 
|  | goto out; | 
|  | __load_psw_mask(PSW_BASE_BITS | PSW_MASK_EXT | | 
|  | PSW_MASK_WAIT | PSW_DEFAULT_KEY); | 
|  | local_irq_disable(); | 
|  | out: | 
|  | /* Contents of the sccb might have changed. */ | 
|  | barrier(); | 
|  | __ctl_clear_bit(0, 9); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void __init sclp_read_info_early(void) | 
|  | { | 
|  | int rc; | 
|  | int i; | 
|  | struct read_info_sccb *sccb; | 
|  | sclp_cmdw_t commands[] = {SCLP_CMDW_READ_SCP_INFO_FORCED, | 
|  | SCLP_CMDW_READ_SCP_INFO}; | 
|  |  | 
|  | sccb = &early_read_info_sccb; | 
|  | for (i = 0; i < ARRAY_SIZE(commands); i++) { | 
|  | do { | 
|  | memset(sccb, 0, sizeof(*sccb)); | 
|  | sccb->header.length = sizeof(*sccb); | 
|  | sccb->header.function_code = 0x80; | 
|  | sccb->header.control_mask[2] = 0x80; | 
|  | rc = sclp_cmd_sync_early(commands[i], sccb); | 
|  | } while (rc == -EBUSY); | 
|  |  | 
|  | if (rc) | 
|  | break; | 
|  | if (sccb->header.response_code == 0x10) { | 
|  | early_read_info_sccb_valid = 1; | 
|  | break; | 
|  | } | 
|  | if (sccb->header.response_code != 0x1f0) | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | void __init sclp_facilities_detect(void) | 
|  | { | 
|  | struct read_info_sccb *sccb; | 
|  |  | 
|  | sclp_read_info_early(); | 
|  | if (!early_read_info_sccb_valid) | 
|  | return; | 
|  |  | 
|  | sccb = &early_read_info_sccb; | 
|  | sclp_facilities = sccb->facilities; | 
|  | sclp_fac84 = sccb->fac84; | 
|  | rnmax = sccb->rnmax ? sccb->rnmax : sccb->rnmax2; | 
|  | rzm = sccb->rnsize ? sccb->rnsize : sccb->rnsize2; | 
|  | rzm <<= 20; | 
|  | } | 
|  |  | 
|  | unsigned long long sclp_get_rnmax(void) | 
|  | { | 
|  | return rnmax; | 
|  | } | 
|  |  | 
|  | unsigned long long sclp_get_rzm(void) | 
|  | { | 
|  | return rzm; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function will be called after sclp_facilities_detect(), which gets | 
|  | * called from early.c code. Therefore the sccb should have valid contents. | 
|  | */ | 
|  | void __init sclp_get_ipl_info(struct sclp_ipl_info *info) | 
|  | { | 
|  | struct read_info_sccb *sccb; | 
|  |  | 
|  | if (!early_read_info_sccb_valid) | 
|  | return; | 
|  | sccb = &early_read_info_sccb; | 
|  | info->is_valid = 1; | 
|  | if (sccb->flags & 0x2) | 
|  | info->has_dump = 1; | 
|  | memcpy(&info->loadparm, &sccb->loadparm, LOADPARM_LEN); | 
|  | } | 
|  |  | 
|  | static void sclp_sync_callback(struct sclp_req *req, void *data) | 
|  | { | 
|  | struct completion *completion = data; | 
|  |  | 
|  | complete(completion); | 
|  | } | 
|  |  | 
|  | static int do_sync_request(sclp_cmdw_t cmd, void *sccb) | 
|  | { | 
|  | struct completion completion; | 
|  | struct sclp_req *request; | 
|  | int rc; | 
|  |  | 
|  | request = kzalloc(sizeof(*request), GFP_KERNEL); | 
|  | if (!request) | 
|  | return -ENOMEM; | 
|  | request->command = cmd; | 
|  | request->sccb = sccb; | 
|  | request->status = SCLP_REQ_FILLED; | 
|  | request->callback = sclp_sync_callback; | 
|  | request->callback_data = &completion; | 
|  | init_completion(&completion); | 
|  |  | 
|  | /* Perform sclp request. */ | 
|  | rc = sclp_add_request(request); | 
|  | if (rc) | 
|  | goto out; | 
|  | wait_for_completion(&completion); | 
|  |  | 
|  | /* Check response. */ | 
|  | if (request->status != SCLP_REQ_DONE) { | 
|  | pr_warning("sync request failed (cmd=0x%08x, " | 
|  | "status=0x%02x)\n", cmd, request->status); | 
|  | rc = -EIO; | 
|  | } | 
|  | out: | 
|  | kfree(request); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * CPU configuration related functions. | 
|  | */ | 
|  |  | 
|  | #define SCLP_CMDW_READ_CPU_INFO		0x00010001 | 
|  | #define SCLP_CMDW_CONFIGURE_CPU		0x00110001 | 
|  | #define SCLP_CMDW_DECONFIGURE_CPU	0x00100001 | 
|  |  | 
|  | struct read_cpu_info_sccb { | 
|  | struct	sccb_header header; | 
|  | u16	nr_configured; | 
|  | u16	offset_configured; | 
|  | u16	nr_standby; | 
|  | u16	offset_standby; | 
|  | u8	reserved[4096 - 16]; | 
|  | } __attribute__((packed, aligned(PAGE_SIZE))); | 
|  |  | 
|  | static void sclp_fill_cpu_info(struct sclp_cpu_info *info, | 
|  | struct read_cpu_info_sccb *sccb) | 
|  | { | 
|  | char *page = (char *) sccb; | 
|  |  | 
|  | memset(info, 0, sizeof(*info)); | 
|  | info->configured = sccb->nr_configured; | 
|  | info->standby = sccb->nr_standby; | 
|  | info->combined = sccb->nr_configured + sccb->nr_standby; | 
|  | info->has_cpu_type = sclp_fac84 & 0x1; | 
|  | memcpy(&info->cpu, page + sccb->offset_configured, | 
|  | info->combined * sizeof(struct sclp_cpu_entry)); | 
|  | } | 
|  |  | 
|  | int sclp_get_cpu_info(struct sclp_cpu_info *info) | 
|  | { | 
|  | int rc; | 
|  | struct read_cpu_info_sccb *sccb; | 
|  |  | 
|  | if (!SCLP_HAS_CPU_INFO) | 
|  | return -EOPNOTSUPP; | 
|  | sccb = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA); | 
|  | if (!sccb) | 
|  | return -ENOMEM; | 
|  | sccb->header.length = sizeof(*sccb); | 
|  | rc = do_sync_request(SCLP_CMDW_READ_CPU_INFO, sccb); | 
|  | if (rc) | 
|  | goto out; | 
|  | if (sccb->header.response_code != 0x0010) { | 
|  | pr_warning("readcpuinfo failed (response=0x%04x)\n", | 
|  | sccb->header.response_code); | 
|  | rc = -EIO; | 
|  | goto out; | 
|  | } | 
|  | sclp_fill_cpu_info(info, sccb); | 
|  | out: | 
|  | free_page((unsigned long) sccb); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | struct cpu_configure_sccb { | 
|  | struct sccb_header header; | 
|  | } __attribute__((packed, aligned(8))); | 
|  |  | 
|  | static int do_cpu_configure(sclp_cmdw_t cmd) | 
|  | { | 
|  | struct cpu_configure_sccb *sccb; | 
|  | int rc; | 
|  |  | 
|  | if (!SCLP_HAS_CPU_RECONFIG) | 
|  | return -EOPNOTSUPP; | 
|  | /* | 
|  | * This is not going to cross a page boundary since we force | 
|  | * kmalloc to have a minimum alignment of 8 bytes on s390. | 
|  | */ | 
|  | sccb = kzalloc(sizeof(*sccb), GFP_KERNEL | GFP_DMA); | 
|  | if (!sccb) | 
|  | return -ENOMEM; | 
|  | sccb->header.length = sizeof(*sccb); | 
|  | rc = do_sync_request(cmd, sccb); | 
|  | if (rc) | 
|  | goto out; | 
|  | switch (sccb->header.response_code) { | 
|  | case 0x0020: | 
|  | case 0x0120: | 
|  | break; | 
|  | default: | 
|  | pr_warning("configure cpu failed (cmd=0x%08x, " | 
|  | "response=0x%04x)\n", cmd, | 
|  | sccb->header.response_code); | 
|  | rc = -EIO; | 
|  | break; | 
|  | } | 
|  | out: | 
|  | kfree(sccb); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | int sclp_cpu_configure(u8 cpu) | 
|  | { | 
|  | return do_cpu_configure(SCLP_CMDW_CONFIGURE_CPU | cpu << 8); | 
|  | } | 
|  |  | 
|  | int sclp_cpu_deconfigure(u8 cpu) | 
|  | { | 
|  | return do_cpu_configure(SCLP_CMDW_DECONFIGURE_CPU | cpu << 8); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MEMORY_HOTPLUG | 
|  |  | 
|  | static DEFINE_MUTEX(sclp_mem_mutex); | 
|  | static LIST_HEAD(sclp_mem_list); | 
|  | static u8 sclp_max_storage_id; | 
|  | static unsigned long sclp_storage_ids[256 / BITS_PER_LONG]; | 
|  | static int sclp_mem_state_changed; | 
|  |  | 
|  | struct memory_increment { | 
|  | struct list_head list; | 
|  | u16 rn; | 
|  | int standby; | 
|  | int usecount; | 
|  | }; | 
|  |  | 
|  | struct assign_storage_sccb { | 
|  | struct sccb_header header; | 
|  | u16 rn; | 
|  | } __packed; | 
|  |  | 
|  | int arch_get_memory_phys_device(unsigned long start_pfn) | 
|  | { | 
|  | if (!rzm) | 
|  | return 0; | 
|  | return PFN_PHYS(start_pfn) >> ilog2(rzm); | 
|  | } | 
|  |  | 
|  | static unsigned long long rn2addr(u16 rn) | 
|  | { | 
|  | return (unsigned long long) (rn - 1) * rzm; | 
|  | } | 
|  |  | 
|  | static int do_assign_storage(sclp_cmdw_t cmd, u16 rn) | 
|  | { | 
|  | struct assign_storage_sccb *sccb; | 
|  | int rc; | 
|  |  | 
|  | sccb = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA); | 
|  | if (!sccb) | 
|  | return -ENOMEM; | 
|  | sccb->header.length = PAGE_SIZE; | 
|  | sccb->rn = rn; | 
|  | rc = do_sync_request(cmd, sccb); | 
|  | if (rc) | 
|  | goto out; | 
|  | switch (sccb->header.response_code) { | 
|  | case 0x0020: | 
|  | case 0x0120: | 
|  | break; | 
|  | default: | 
|  | pr_warning("assign storage failed (cmd=0x%08x, " | 
|  | "response=0x%04x, rn=0x%04x)\n", cmd, | 
|  | sccb->header.response_code, rn); | 
|  | rc = -EIO; | 
|  | break; | 
|  | } | 
|  | out: | 
|  | free_page((unsigned long) sccb); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int sclp_assign_storage(u16 rn) | 
|  | { | 
|  | return do_assign_storage(0x000d0001, rn); | 
|  | } | 
|  |  | 
|  | static int sclp_unassign_storage(u16 rn) | 
|  | { | 
|  | return do_assign_storage(0x000c0001, rn); | 
|  | } | 
|  |  | 
|  | struct attach_storage_sccb { | 
|  | struct sccb_header header; | 
|  | u16 :16; | 
|  | u16 assigned; | 
|  | u32 :32; | 
|  | u32 entries[0]; | 
|  | } __packed; | 
|  |  | 
|  | static int sclp_attach_storage(u8 id) | 
|  | { | 
|  | struct attach_storage_sccb *sccb; | 
|  | int rc; | 
|  | int i; | 
|  |  | 
|  | sccb = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA); | 
|  | if (!sccb) | 
|  | return -ENOMEM; | 
|  | sccb->header.length = PAGE_SIZE; | 
|  | rc = do_sync_request(0x00080001 | id << 8, sccb); | 
|  | if (rc) | 
|  | goto out; | 
|  | switch (sccb->header.response_code) { | 
|  | case 0x0020: | 
|  | set_bit(id, sclp_storage_ids); | 
|  | for (i = 0; i < sccb->assigned; i++) | 
|  | sclp_unassign_storage(sccb->entries[i] >> 16); | 
|  | break; | 
|  | default: | 
|  | rc = -EIO; | 
|  | break; | 
|  | } | 
|  | out: | 
|  | free_page((unsigned long) sccb); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int sclp_mem_change_state(unsigned long start, unsigned long size, | 
|  | int online) | 
|  | { | 
|  | struct memory_increment *incr; | 
|  | unsigned long long istart; | 
|  | int rc = 0; | 
|  |  | 
|  | list_for_each_entry(incr, &sclp_mem_list, list) { | 
|  | istart = rn2addr(incr->rn); | 
|  | if (start + size - 1 < istart) | 
|  | break; | 
|  | if (start > istart + rzm - 1) | 
|  | continue; | 
|  | if (online) { | 
|  | if (incr->usecount++) | 
|  | continue; | 
|  | /* | 
|  | * Don't break the loop if one assign fails. Loop may | 
|  | * be walked again on CANCEL and we can't save | 
|  | * information if state changed before or not. | 
|  | * So continue and increase usecount for all increments. | 
|  | */ | 
|  | rc |= sclp_assign_storage(incr->rn); | 
|  | } else { | 
|  | if (--incr->usecount) | 
|  | continue; | 
|  | sclp_unassign_storage(incr->rn); | 
|  | } | 
|  | } | 
|  | return rc ? -EIO : 0; | 
|  | } | 
|  |  | 
|  | static int sclp_mem_notifier(struct notifier_block *nb, | 
|  | unsigned long action, void *data) | 
|  | { | 
|  | unsigned long start, size; | 
|  | struct memory_notify *arg; | 
|  | unsigned char id; | 
|  | int rc = 0; | 
|  |  | 
|  | arg = data; | 
|  | start = arg->start_pfn << PAGE_SHIFT; | 
|  | size = arg->nr_pages << PAGE_SHIFT; | 
|  | mutex_lock(&sclp_mem_mutex); | 
|  | for (id = 0; id <= sclp_max_storage_id; id++) | 
|  | if (!test_bit(id, sclp_storage_ids)) | 
|  | sclp_attach_storage(id); | 
|  | switch (action) { | 
|  | case MEM_ONLINE: | 
|  | case MEM_GOING_OFFLINE: | 
|  | case MEM_CANCEL_OFFLINE: | 
|  | break; | 
|  | case MEM_GOING_ONLINE: | 
|  | rc = sclp_mem_change_state(start, size, 1); | 
|  | break; | 
|  | case MEM_CANCEL_ONLINE: | 
|  | sclp_mem_change_state(start, size, 0); | 
|  | break; | 
|  | case MEM_OFFLINE: | 
|  | sclp_mem_change_state(start, size, 0); | 
|  | break; | 
|  | default: | 
|  | rc = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (!rc) | 
|  | sclp_mem_state_changed = 1; | 
|  | mutex_unlock(&sclp_mem_mutex); | 
|  | return rc ? NOTIFY_BAD : NOTIFY_OK; | 
|  | } | 
|  |  | 
|  | static struct notifier_block sclp_mem_nb = { | 
|  | .notifier_call = sclp_mem_notifier, | 
|  | }; | 
|  |  | 
|  | static void __init add_memory_merged(u16 rn) | 
|  | { | 
|  | static u16 first_rn, num; | 
|  | unsigned long long start, size; | 
|  |  | 
|  | if (rn && first_rn && (first_rn + num == rn)) { | 
|  | num++; | 
|  | return; | 
|  | } | 
|  | if (!first_rn) | 
|  | goto skip_add; | 
|  | start = rn2addr(first_rn); | 
|  | size = (unsigned long long ) num * rzm; | 
|  | if (start >= VMEM_MAX_PHYS) | 
|  | goto skip_add; | 
|  | if (start + size > VMEM_MAX_PHYS) | 
|  | size = VMEM_MAX_PHYS - start; | 
|  | if (memory_end_set && (start >= memory_end)) | 
|  | goto skip_add; | 
|  | if (memory_end_set && (start + size > memory_end)) | 
|  | size = memory_end - start; | 
|  | add_memory(0, start, size); | 
|  | skip_add: | 
|  | first_rn = rn; | 
|  | num = 1; | 
|  | } | 
|  |  | 
|  | static void __init sclp_add_standby_memory(void) | 
|  | { | 
|  | struct memory_increment *incr; | 
|  |  | 
|  | list_for_each_entry(incr, &sclp_mem_list, list) | 
|  | if (incr->standby) | 
|  | add_memory_merged(incr->rn); | 
|  | add_memory_merged(0); | 
|  | } | 
|  |  | 
|  | static void __init insert_increment(u16 rn, int standby, int assigned) | 
|  | { | 
|  | struct memory_increment *incr, *new_incr; | 
|  | struct list_head *prev; | 
|  | u16 last_rn; | 
|  |  | 
|  | new_incr = kzalloc(sizeof(*new_incr), GFP_KERNEL); | 
|  | if (!new_incr) | 
|  | return; | 
|  | new_incr->rn = rn; | 
|  | new_incr->standby = standby; | 
|  | if (!standby) | 
|  | new_incr->usecount = 1; | 
|  | last_rn = 0; | 
|  | prev = &sclp_mem_list; | 
|  | list_for_each_entry(incr, &sclp_mem_list, list) { | 
|  | if (assigned && incr->rn > rn) | 
|  | break; | 
|  | if (!assigned && incr->rn - last_rn > 1) | 
|  | break; | 
|  | last_rn = incr->rn; | 
|  | prev = &incr->list; | 
|  | } | 
|  | if (!assigned) | 
|  | new_incr->rn = last_rn + 1; | 
|  | if (new_incr->rn > rnmax) { | 
|  | kfree(new_incr); | 
|  | return; | 
|  | } | 
|  | list_add(&new_incr->list, prev); | 
|  | } | 
|  |  | 
|  | static int sclp_mem_freeze(struct device *dev) | 
|  | { | 
|  | if (!sclp_mem_state_changed) | 
|  | return 0; | 
|  | pr_err("Memory hotplug state changed, suspend refused.\n"); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | struct read_storage_sccb { | 
|  | struct sccb_header header; | 
|  | u16 max_id; | 
|  | u16 assigned; | 
|  | u16 standby; | 
|  | u16 :16; | 
|  | u32 entries[0]; | 
|  | } __packed; | 
|  |  | 
|  | static const struct dev_pm_ops sclp_mem_pm_ops = { | 
|  | .freeze		= sclp_mem_freeze, | 
|  | }; | 
|  |  | 
|  | static struct platform_driver sclp_mem_pdrv = { | 
|  | .driver = { | 
|  | .name	= "sclp_mem", | 
|  | .pm	= &sclp_mem_pm_ops, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init sclp_detect_standby_memory(void) | 
|  | { | 
|  | struct platform_device *sclp_pdev; | 
|  | struct read_storage_sccb *sccb; | 
|  | int i, id, assigned, rc; | 
|  |  | 
|  | if (!early_read_info_sccb_valid) | 
|  | return 0; | 
|  | if ((sclp_facilities & 0xe00000000000ULL) != 0xe00000000000ULL) | 
|  | return 0; | 
|  | rc = -ENOMEM; | 
|  | sccb = (void *) __get_free_page(GFP_KERNEL | GFP_DMA); | 
|  | if (!sccb) | 
|  | goto out; | 
|  | assigned = 0; | 
|  | for (id = 0; id <= sclp_max_storage_id; id++) { | 
|  | memset(sccb, 0, PAGE_SIZE); | 
|  | sccb->header.length = PAGE_SIZE; | 
|  | rc = do_sync_request(0x00040001 | id << 8, sccb); | 
|  | if (rc) | 
|  | goto out; | 
|  | switch (sccb->header.response_code) { | 
|  | case 0x0010: | 
|  | set_bit(id, sclp_storage_ids); | 
|  | for (i = 0; i < sccb->assigned; i++) { | 
|  | if (!sccb->entries[i]) | 
|  | continue; | 
|  | assigned++; | 
|  | insert_increment(sccb->entries[i] >> 16, 0, 1); | 
|  | } | 
|  | break; | 
|  | case 0x0310: | 
|  | break; | 
|  | case 0x0410: | 
|  | for (i = 0; i < sccb->assigned; i++) { | 
|  | if (!sccb->entries[i]) | 
|  | continue; | 
|  | assigned++; | 
|  | insert_increment(sccb->entries[i] >> 16, 1, 1); | 
|  | } | 
|  | break; | 
|  | default: | 
|  | rc = -EIO; | 
|  | break; | 
|  | } | 
|  | if (!rc) | 
|  | sclp_max_storage_id = sccb->max_id; | 
|  | } | 
|  | if (rc || list_empty(&sclp_mem_list)) | 
|  | goto out; | 
|  | for (i = 1; i <= rnmax - assigned; i++) | 
|  | insert_increment(0, 1, 0); | 
|  | rc = register_memory_notifier(&sclp_mem_nb); | 
|  | if (rc) | 
|  | goto out; | 
|  | rc = platform_driver_register(&sclp_mem_pdrv); | 
|  | if (rc) | 
|  | goto out; | 
|  | sclp_pdev = platform_device_register_simple("sclp_mem", -1, NULL, 0); | 
|  | rc = IS_ERR(sclp_pdev) ? PTR_ERR(sclp_pdev) : 0; | 
|  | if (rc) | 
|  | goto out_driver; | 
|  | sclp_add_standby_memory(); | 
|  | goto out; | 
|  | out_driver: | 
|  | platform_driver_unregister(&sclp_mem_pdrv); | 
|  | out: | 
|  | free_page((unsigned long) sccb); | 
|  | return rc; | 
|  | } | 
|  | __initcall(sclp_detect_standby_memory); | 
|  |  | 
|  | #endif /* CONFIG_MEMORY_HOTPLUG */ | 
|  |  | 
|  | /* | 
|  | * Channel path configuration related functions. | 
|  | */ | 
|  |  | 
|  | #define SCLP_CMDW_CONFIGURE_CHPATH		0x000f0001 | 
|  | #define SCLP_CMDW_DECONFIGURE_CHPATH		0x000e0001 | 
|  | #define SCLP_CMDW_READ_CHPATH_INFORMATION	0x00030001 | 
|  |  | 
|  | struct chp_cfg_sccb { | 
|  | struct sccb_header header; | 
|  | u8 ccm; | 
|  | u8 reserved[6]; | 
|  | u8 cssid; | 
|  | } __attribute__((packed)); | 
|  |  | 
|  | static int do_chp_configure(sclp_cmdw_t cmd) | 
|  | { | 
|  | struct chp_cfg_sccb *sccb; | 
|  | int rc; | 
|  |  | 
|  | if (!SCLP_HAS_CHP_RECONFIG) | 
|  | return -EOPNOTSUPP; | 
|  | /* Prepare sccb. */ | 
|  | sccb = (struct chp_cfg_sccb *) get_zeroed_page(GFP_KERNEL | GFP_DMA); | 
|  | if (!sccb) | 
|  | return -ENOMEM; | 
|  | sccb->header.length = sizeof(*sccb); | 
|  | rc = do_sync_request(cmd, sccb); | 
|  | if (rc) | 
|  | goto out; | 
|  | switch (sccb->header.response_code) { | 
|  | case 0x0020: | 
|  | case 0x0120: | 
|  | case 0x0440: | 
|  | case 0x0450: | 
|  | break; | 
|  | default: | 
|  | pr_warning("configure channel-path failed " | 
|  | "(cmd=0x%08x, response=0x%04x)\n", cmd, | 
|  | sccb->header.response_code); | 
|  | rc = -EIO; | 
|  | break; | 
|  | } | 
|  | out: | 
|  | free_page((unsigned long) sccb); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * sclp_chp_configure - perform configure channel-path sclp command | 
|  | * @chpid: channel-path ID | 
|  | * | 
|  | * Perform configure channel-path command sclp command for specified chpid. | 
|  | * Return 0 after command successfully finished, non-zero otherwise. | 
|  | */ | 
|  | int sclp_chp_configure(struct chp_id chpid) | 
|  | { | 
|  | return do_chp_configure(SCLP_CMDW_CONFIGURE_CHPATH | chpid.id << 8); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * sclp_chp_deconfigure - perform deconfigure channel-path sclp command | 
|  | * @chpid: channel-path ID | 
|  | * | 
|  | * Perform deconfigure channel-path command sclp command for specified chpid | 
|  | * and wait for completion. On success return 0. Return non-zero otherwise. | 
|  | */ | 
|  | int sclp_chp_deconfigure(struct chp_id chpid) | 
|  | { | 
|  | return do_chp_configure(SCLP_CMDW_DECONFIGURE_CHPATH | chpid.id << 8); | 
|  | } | 
|  |  | 
|  | struct chp_info_sccb { | 
|  | struct sccb_header header; | 
|  | u8 recognized[SCLP_CHP_INFO_MASK_SIZE]; | 
|  | u8 standby[SCLP_CHP_INFO_MASK_SIZE]; | 
|  | u8 configured[SCLP_CHP_INFO_MASK_SIZE]; | 
|  | u8 ccm; | 
|  | u8 reserved[6]; | 
|  | u8 cssid; | 
|  | } __attribute__((packed)); | 
|  |  | 
|  | /** | 
|  | * sclp_chp_read_info - perform read channel-path information sclp command | 
|  | * @info: resulting channel-path information data | 
|  | * | 
|  | * Perform read channel-path information sclp command and wait for completion. | 
|  | * On success, store channel-path information in @info and return 0. Return | 
|  | * non-zero otherwise. | 
|  | */ | 
|  | int sclp_chp_read_info(struct sclp_chp_info *info) | 
|  | { | 
|  | struct chp_info_sccb *sccb; | 
|  | int rc; | 
|  |  | 
|  | if (!SCLP_HAS_CHP_INFO) | 
|  | return -EOPNOTSUPP; | 
|  | /* Prepare sccb. */ | 
|  | sccb = (struct chp_info_sccb *) get_zeroed_page(GFP_KERNEL | GFP_DMA); | 
|  | if (!sccb) | 
|  | return -ENOMEM; | 
|  | sccb->header.length = sizeof(*sccb); | 
|  | rc = do_sync_request(SCLP_CMDW_READ_CHPATH_INFORMATION, sccb); | 
|  | if (rc) | 
|  | goto out; | 
|  | if (sccb->header.response_code != 0x0010) { | 
|  | pr_warning("read channel-path info failed " | 
|  | "(response=0x%04x)\n", sccb->header.response_code); | 
|  | rc = -EIO; | 
|  | goto out; | 
|  | } | 
|  | memcpy(info->recognized, sccb->recognized, SCLP_CHP_INFO_MASK_SIZE); | 
|  | memcpy(info->standby, sccb->standby, SCLP_CHP_INFO_MASK_SIZE); | 
|  | memcpy(info->configured, sccb->configured, SCLP_CHP_INFO_MASK_SIZE); | 
|  | out: | 
|  | free_page((unsigned long) sccb); | 
|  | return rc; | 
|  | } |