Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
new file mode 100644
index 0000000..9e36b07
--- /dev/null
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -0,0 +1,689 @@
+/*
+ * linux/arch/alpha/kernel/sys_dp264.c
+ *
+ * Copyright (C) 1995 David A Rusling
+ * Copyright (C) 1996, 1999 Jay A Estabrook
+ * Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Modified by Christopher C. Chimelis, 2001 to
+ * add support for the addition of Shark to the
+ * Tsunami family.
+ *
+ * Code supporting the DP264 (EV6+TSUNAMI).
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/core_tsunami.h>
+#include <asm/hwrpb.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+/* Note mask bit is true for ENABLED irqs. */
+static unsigned long cached_irq_mask;
+/* dp264 boards handle at max four CPUs */
+static unsigned long cpu_irq_affinity[4] = { 0UL, 0UL, 0UL, 0UL };
+
+DEFINE_SPINLOCK(dp264_irq_lock);
+
+static void
+tsunami_update_irq_hw(unsigned long mask)
+{
+ register tsunami_cchip *cchip = TSUNAMI_cchip;
+ unsigned long isa_enable = 1UL << 55;
+ register int bcpu = boot_cpuid;
+
+#ifdef CONFIG_SMP
+ volatile unsigned long *dim0, *dim1, *dim2, *dim3;
+ unsigned long mask0, mask1, mask2, mask3, dummy;
+
+ mask &= ~isa_enable;
+ mask0 = mask & cpu_irq_affinity[0];
+ mask1 = mask & cpu_irq_affinity[1];
+ mask2 = mask & cpu_irq_affinity[2];
+ mask3 = mask & cpu_irq_affinity[3];
+
+ if (bcpu == 0) mask0 |= isa_enable;
+ else if (bcpu == 1) mask1 |= isa_enable;
+ else if (bcpu == 2) mask2 |= isa_enable;
+ else mask3 |= isa_enable;
+
+ dim0 = &cchip->dim0.csr;
+ dim1 = &cchip->dim1.csr;
+ dim2 = &cchip->dim2.csr;
+ dim3 = &cchip->dim3.csr;
+ if (!cpu_possible(0)) dim0 = &dummy;
+ if (!cpu_possible(1)) dim1 = &dummy;
+ if (!cpu_possible(2)) dim2 = &dummy;
+ if (!cpu_possible(3)) dim3 = &dummy;
+
+ *dim0 = mask0;
+ *dim1 = mask1;
+ *dim2 = mask2;
+ *dim3 = mask3;
+ mb();
+ *dim0;
+ *dim1;
+ *dim2;
+ *dim3;
+#else
+ volatile unsigned long *dimB;
+ if (bcpu == 0) dimB = &cchip->dim0.csr;
+ else if (bcpu == 1) dimB = &cchip->dim1.csr;
+ else if (bcpu == 2) dimB = &cchip->dim2.csr;
+ else dimB = &cchip->dim3.csr;
+
+ *dimB = mask | isa_enable;
+ mb();
+ *dimB;
+#endif
+}
+
+static void
+dp264_enable_irq(unsigned int irq)
+{
+ spin_lock(&dp264_irq_lock);
+ cached_irq_mask |= 1UL << irq;
+ tsunami_update_irq_hw(cached_irq_mask);
+ spin_unlock(&dp264_irq_lock);
+}
+
+static void
+dp264_disable_irq(unsigned int irq)
+{
+ spin_lock(&dp264_irq_lock);
+ cached_irq_mask &= ~(1UL << irq);
+ tsunami_update_irq_hw(cached_irq_mask);
+ spin_unlock(&dp264_irq_lock);
+}
+
+static unsigned int
+dp264_startup_irq(unsigned int irq)
+{
+ dp264_enable_irq(irq);
+ return 0; /* never anything pending */
+}
+
+static void
+dp264_end_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ dp264_enable_irq(irq);
+}
+
+static void
+clipper_enable_irq(unsigned int irq)
+{
+ spin_lock(&dp264_irq_lock);
+ cached_irq_mask |= 1UL << (irq - 16);
+ tsunami_update_irq_hw(cached_irq_mask);
+ spin_unlock(&dp264_irq_lock);
+}
+
+static void
+clipper_disable_irq(unsigned int irq)
+{
+ spin_lock(&dp264_irq_lock);
+ cached_irq_mask &= ~(1UL << (irq - 16));
+ tsunami_update_irq_hw(cached_irq_mask);
+ spin_unlock(&dp264_irq_lock);
+}
+
+static unsigned int
+clipper_startup_irq(unsigned int irq)
+{
+ clipper_enable_irq(irq);
+ return 0; /* never anything pending */
+}
+
+static void
+clipper_end_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ clipper_enable_irq(irq);
+}
+
+static void
+cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
+{
+ int cpu;
+
+ for (cpu = 0; cpu < 4; cpu++) {
+ unsigned long aff = cpu_irq_affinity[cpu];
+ if (cpu_isset(cpu, affinity))
+ aff |= 1UL << irq;
+ else
+ aff &= ~(1UL << irq);
+ cpu_irq_affinity[cpu] = aff;
+ }
+}
+
+static void
+dp264_set_affinity(unsigned int irq, cpumask_t affinity)
+{
+ spin_lock(&dp264_irq_lock);
+ cpu_set_irq_affinity(irq, affinity);
+ tsunami_update_irq_hw(cached_irq_mask);
+ spin_unlock(&dp264_irq_lock);
+}
+
+static void
+clipper_set_affinity(unsigned int irq, cpumask_t affinity)
+{
+ spin_lock(&dp264_irq_lock);
+ cpu_set_irq_affinity(irq - 16, affinity);
+ tsunami_update_irq_hw(cached_irq_mask);
+ spin_unlock(&dp264_irq_lock);
+}
+
+static struct hw_interrupt_type dp264_irq_type = {
+ .typename = "DP264",
+ .startup = dp264_startup_irq,
+ .shutdown = dp264_disable_irq,
+ .enable = dp264_enable_irq,
+ .disable = dp264_disable_irq,
+ .ack = dp264_disable_irq,
+ .end = dp264_end_irq,
+ .set_affinity = dp264_set_affinity,
+};
+
+static struct hw_interrupt_type clipper_irq_type = {
+ .typename = "CLIPPER",
+ .startup = clipper_startup_irq,
+ .shutdown = clipper_disable_irq,
+ .enable = clipper_enable_irq,
+ .disable = clipper_disable_irq,
+ .ack = clipper_disable_irq,
+ .end = clipper_end_irq,
+ .set_affinity = clipper_set_affinity,
+};
+
+static void
+dp264_device_interrupt(unsigned long vector, struct pt_regs * regs)
+{
+#if 1
+ printk("dp264_device_interrupt: NOT IMPLEMENTED YET!! \n");
+#else
+ unsigned long pld;
+ unsigned int i;
+
+ /* Read the interrupt summary register of TSUNAMI */
+ pld = TSUNAMI_cchip->dir0.csr;
+
+ /*
+ * Now for every possible bit set, work through them and call
+ * the appropriate interrupt handler.
+ */
+ while (pld) {
+ i = ffz(~pld);
+ pld &= pld - 1; /* clear least bit set */
+ if (i == 55)
+ isa_device_interrupt(vector, regs);
+ else
+ handle_irq(16 + i, 16 + i, regs);
+#if 0
+ TSUNAMI_cchip->dir0.csr = 1UL << i; mb();
+ tmp = TSUNAMI_cchip->dir0.csr;
+#endif
+ }
+#endif
+}
+
+static void
+dp264_srm_device_interrupt(unsigned long vector, struct pt_regs * regs)
+{
+ int irq;
+
+ irq = (vector - 0x800) >> 4;
+
+ /*
+ * The SRM console reports PCI interrupts with a vector calculated by:
+ *
+ * 0x900 + (0x10 * DRIR-bit)
+ *
+ * So bit 16 shows up as IRQ 32, etc.
+ *
+ * On DP264/BRICK/MONET, we adjust it down by 16 because at least
+ * that many of the low order bits of the DRIR are not used, and
+ * so we don't count them.
+ */
+ if (irq >= 32)
+ irq -= 16;
+
+ handle_irq(irq, regs);
+}
+
+static void
+clipper_srm_device_interrupt(unsigned long vector, struct pt_regs * regs)
+{
+ int irq;
+
+ irq = (vector - 0x800) >> 4;
+
+/*
+ * The SRM console reports PCI interrupts with a vector calculated by:
+ *
+ * 0x900 + (0x10 * DRIR-bit)
+ *
+ * So bit 16 shows up as IRQ 32, etc.
+ *
+ * CLIPPER uses bits 8-47 for PCI interrupts, so we do not need
+ * to scale down the vector reported, we just use it.
+ *
+ * Eg IRQ 24 is DRIR bit 8, etc, etc
+ */
+ handle_irq(irq, regs);
+}
+
+static void __init
+init_tsunami_irqs(struct hw_interrupt_type * ops, int imin, int imax)
+{
+ long i;
+ for (i = imin; i <= imax; ++i) {
+ irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL;
+ irq_desc[i].handler = ops;
+ }
+}
+
+static void __init
+dp264_init_irq(void)
+{
+ outb(0, DMA1_RESET_REG);
+ outb(0, DMA2_RESET_REG);
+ outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
+ outb(0, DMA2_MASK_REG);
+
+ if (alpha_using_srm)
+ alpha_mv.device_interrupt = dp264_srm_device_interrupt;
+
+ tsunami_update_irq_hw(0);
+
+ init_i8259a_irqs();
+ init_tsunami_irqs(&dp264_irq_type, 16, 47);
+}
+
+static void __init
+clipper_init_irq(void)
+{
+ outb(0, DMA1_RESET_REG);
+ outb(0, DMA2_RESET_REG);
+ outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
+ outb(0, DMA2_MASK_REG);
+
+ if (alpha_using_srm)
+ alpha_mv.device_interrupt = clipper_srm_device_interrupt;
+
+ tsunami_update_irq_hw(0);
+
+ init_i8259a_irqs();
+ init_tsunami_irqs(&clipper_irq_type, 24, 63);
+}
+
+
+/*
+ * PCI Fixup configuration.
+ *
+ * Summary @ TSUNAMI_CSR_DIM0:
+ * Bit Meaning
+ * 0-17 Unused
+ *18 Interrupt SCSI B (Adaptec 7895 builtin)
+ *19 Interrupt SCSI A (Adaptec 7895 builtin)
+ *20 Interrupt Line D from slot 2 PCI0
+ *21 Interrupt Line C from slot 2 PCI0
+ *22 Interrupt Line B from slot 2 PCI0
+ *23 Interrupt Line A from slot 2 PCI0
+ *24 Interrupt Line D from slot 1 PCI0
+ *25 Interrupt Line C from slot 1 PCI0
+ *26 Interrupt Line B from slot 1 PCI0
+ *27 Interrupt Line A from slot 1 PCI0
+ *28 Interrupt Line D from slot 0 PCI0
+ *29 Interrupt Line C from slot 0 PCI0
+ *30 Interrupt Line B from slot 0 PCI0
+ *31 Interrupt Line A from slot 0 PCI0
+ *
+ *32 Interrupt Line D from slot 3 PCI1
+ *33 Interrupt Line C from slot 3 PCI1
+ *34 Interrupt Line B from slot 3 PCI1
+ *35 Interrupt Line A from slot 3 PCI1
+ *36 Interrupt Line D from slot 2 PCI1
+ *37 Interrupt Line C from slot 2 PCI1
+ *38 Interrupt Line B from slot 2 PCI1
+ *39 Interrupt Line A from slot 2 PCI1
+ *40 Interrupt Line D from slot 1 PCI1
+ *41 Interrupt Line C from slot 1 PCI1
+ *42 Interrupt Line B from slot 1 PCI1
+ *43 Interrupt Line A from slot 1 PCI1
+ *44 Interrupt Line D from slot 0 PCI1
+ *45 Interrupt Line C from slot 0 PCI1
+ *46 Interrupt Line B from slot 0 PCI1
+ *47 Interrupt Line A from slot 0 PCI1
+ *48-52 Unused
+ *53 PCI0 NMI (from Cypress)
+ *54 PCI0 SMI INT (from Cypress)
+ *55 PCI0 ISA Interrupt (from Cypress)
+ *56-60 Unused
+ *61 PCI1 Bus Error
+ *62 PCI0 Bus Error
+ *63 Reserved
+ *
+ * IdSel
+ * 5 Cypress Bridge I/O
+ * 6 SCSI Adaptec builtin
+ * 7 64 bit PCI option slot 0 (all busses)
+ * 8 64 bit PCI option slot 1 (all busses)
+ * 9 64 bit PCI option slot 2 (all busses)
+ * 10 64 bit PCI option slot 3 (not bus 0)
+ */
+
+static int __init
+dp264_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ static char irq_tab[6][5] __initdata = {
+ /*INT INTA INTB INTC INTD */
+ { -1, -1, -1, -1, -1}, /* IdSel 5 ISA Bridge */
+ { 16+ 3, 16+ 3, 16+ 2, 16+ 2, 16+ 2}, /* IdSel 6 SCSI builtin*/
+ { 16+15, 16+15, 16+14, 16+13, 16+12}, /* IdSel 7 slot 0 */
+ { 16+11, 16+11, 16+10, 16+ 9, 16+ 8}, /* IdSel 8 slot 1 */
+ { 16+ 7, 16+ 7, 16+ 6, 16+ 5, 16+ 4}, /* IdSel 9 slot 2 */
+ { 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0} /* IdSel 10 slot 3 */
+ };
+ const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5;
+
+ struct pci_controller *hose = dev->sysdata;
+ int irq = COMMON_TABLE_LOOKUP;
+
+ if (irq > 0) {
+ irq += 16 * hose->index;
+ } else {
+ /* ??? The Contaq IDE controller on the ISA bridge uses
+ "legacy" interrupts 14 and 15. I don't know if anything
+ can wind up at the same slot+pin on hose1, so we'll
+ just have to trust whatever value the console might
+ have assigned. */
+
+ u8 irq8;
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8);
+ irq = irq8;
+ }
+
+ return irq;
+}
+
+static int __init
+monet_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ static char irq_tab[13][5] __initdata = {
+ /*INT INTA INTB INTC INTD */
+ { 45, 45, 45, 45, 45}, /* IdSel 3 21143 PCI1 */
+ { -1, -1, -1, -1, -1}, /* IdSel 4 unused */
+ { -1, -1, -1, -1, -1}, /* IdSel 5 unused */
+ { 47, 47, 47, 47, 47}, /* IdSel 6 SCSI PCI1 */
+ { -1, -1, -1, -1, -1}, /* IdSel 7 ISA Bridge */
+ { -1, -1, -1, -1, -1}, /* IdSel 8 P2P PCI1 */
+#if 1
+ { 28, 28, 29, 30, 31}, /* IdSel 14 slot 4 PCI2*/
+ { 24, 24, 25, 26, 27}, /* IdSel 15 slot 5 PCI2*/
+#else
+ { -1, -1, -1, -1, -1}, /* IdSel 9 unused */
+ { -1, -1, -1, -1, -1}, /* IdSel 10 unused */
+#endif
+ { 40, 40, 41, 42, 43}, /* IdSel 11 slot 1 PCI0*/
+ { 36, 36, 37, 38, 39}, /* IdSel 12 slot 2 PCI0*/
+ { 32, 32, 33, 34, 35}, /* IdSel 13 slot 3 PCI0*/
+ { 28, 28, 29, 30, 31}, /* IdSel 14 slot 4 PCI2*/
+ { 24, 24, 25, 26, 27} /* IdSel 15 slot 5 PCI2*/
+ };
+ const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5;
+ return COMMON_TABLE_LOOKUP;
+}
+
+static u8 __init
+monet_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+ struct pci_controller *hose = dev->sysdata;
+ int slot, pin = *pinp;
+
+ if (!dev->bus->parent) {
+ slot = PCI_SLOT(dev->devfn);
+ }
+ /* Check for the built-in bridge on hose 1. */
+ else if (hose->index == 1 && PCI_SLOT(dev->bus->self->devfn) == 8) {
+ slot = PCI_SLOT(dev->devfn);
+ } else {
+ /* Must be a card-based bridge. */
+ do {
+ /* Check for built-in bridge on hose 1. */
+ if (hose->index == 1 &&
+ PCI_SLOT(dev->bus->self->devfn) == 8) {
+ slot = PCI_SLOT(dev->devfn);
+ break;
+ }
+ pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)) ;
+
+ /* Move up the chain of bridges. */
+ dev = dev->bus->self;
+ /* Slot of the next bridge. */
+ slot = PCI_SLOT(dev->devfn);
+ } while (dev->bus->self);
+ }
+ *pinp = pin;
+ return slot;
+}
+
+static int __init
+webbrick_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ static char irq_tab[13][5] __initdata = {
+ /*INT INTA INTB INTC INTD */
+ { -1, -1, -1, -1, -1}, /* IdSel 7 ISA Bridge */
+ { -1, -1, -1, -1, -1}, /* IdSel 8 unused */
+ { 29, 29, 29, 29, 29}, /* IdSel 9 21143 #1 */
+ { -1, -1, -1, -1, -1}, /* IdSel 10 unused */
+ { 30, 30, 30, 30, 30}, /* IdSel 11 21143 #2 */
+ { -1, -1, -1, -1, -1}, /* IdSel 12 unused */
+ { -1, -1, -1, -1, -1}, /* IdSel 13 unused */
+ { 35, 35, 34, 33, 32}, /* IdSel 14 slot 0 */
+ { 39, 39, 38, 37, 36}, /* IdSel 15 slot 1 */
+ { 43, 43, 42, 41, 40}, /* IdSel 16 slot 2 */
+ { 47, 47, 46, 45, 44}, /* IdSel 17 slot 3 */
+ };
+ const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5;
+ return COMMON_TABLE_LOOKUP;
+}
+
+static int __init
+clipper_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ static char irq_tab[7][5] __initdata = {
+ /*INT INTA INTB INTC INTD */
+ { 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 1 slot 1 */
+ { 16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 2 slot 2 */
+ { 16+16, 16+16, 16+17, 16+18, 16+19}, /* IdSel 3 slot 3 */
+ { 16+20, 16+20, 16+21, 16+22, 16+23}, /* IdSel 4 slot 4 */
+ { 16+24, 16+24, 16+25, 16+26, 16+27}, /* IdSel 5 slot 5 */
+ { 16+28, 16+28, 16+29, 16+30, 16+31}, /* IdSel 6 slot 6 */
+ { -1, -1, -1, -1, -1} /* IdSel 7 ISA Bridge */
+ };
+ const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5;
+
+ struct pci_controller *hose = dev->sysdata;
+ int irq = COMMON_TABLE_LOOKUP;
+
+ if (irq > 0)
+ irq += 16 * hose->index;
+
+ return irq;
+}
+
+static void __init
+dp264_init_pci(void)
+{
+ common_init_pci();
+ SMC669_Init(0);
+}
+
+static void __init
+monet_init_pci(void)
+{
+ common_init_pci();
+ SMC669_Init(1);
+ es1888_init();
+}
+
+static void __init
+webbrick_init_arch(void)
+{
+ tsunami_init_arch();
+
+ /* Tsunami caches 4 PTEs at a time; DS10 has only 1 hose. */
+ hose_head->sg_isa->align_entry = 4;
+ hose_head->sg_pci->align_entry = 4;
+}
+
+
+/*
+ * The System Vectors
+ */
+
+struct alpha_machine_vector dp264_mv __initmv = {
+ .vector_name = "DP264",
+ DO_EV6_MMU,
+ DO_DEFAULT_RTC,
+ DO_TSUNAMI_IO,
+ .machine_check = tsunami_machine_check,
+ .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
+ .min_io_address = DEFAULT_IO_BASE,
+ .min_mem_address = DEFAULT_MEM_BASE,
+ .pci_dac_offset = TSUNAMI_DAC_OFFSET,
+
+ .nr_irqs = 64,
+ .device_interrupt = dp264_device_interrupt,
+
+ .init_arch = tsunami_init_arch,
+ .init_irq = dp264_init_irq,
+ .init_rtc = common_init_rtc,
+ .init_pci = dp264_init_pci,
+ .kill_arch = tsunami_kill_arch,
+ .pci_map_irq = dp264_map_irq,
+ .pci_swizzle = common_swizzle,
+};
+ALIAS_MV(dp264)
+
+struct alpha_machine_vector monet_mv __initmv = {
+ .vector_name = "Monet",
+ DO_EV6_MMU,
+ DO_DEFAULT_RTC,
+ DO_TSUNAMI_IO,
+ .machine_check = tsunami_machine_check,
+ .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
+ .min_io_address = DEFAULT_IO_BASE,
+ .min_mem_address = DEFAULT_MEM_BASE,
+ .pci_dac_offset = TSUNAMI_DAC_OFFSET,
+
+ .nr_irqs = 64,
+ .device_interrupt = dp264_device_interrupt,
+
+ .init_arch = tsunami_init_arch,
+ .init_irq = dp264_init_irq,
+ .init_rtc = common_init_rtc,
+ .init_pci = monet_init_pci,
+ .kill_arch = tsunami_kill_arch,
+ .pci_map_irq = monet_map_irq,
+ .pci_swizzle = monet_swizzle,
+};
+
+struct alpha_machine_vector webbrick_mv __initmv = {
+ .vector_name = "Webbrick",
+ DO_EV6_MMU,
+ DO_DEFAULT_RTC,
+ DO_TSUNAMI_IO,
+ .machine_check = tsunami_machine_check,
+ .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
+ .min_io_address = DEFAULT_IO_BASE,
+ .min_mem_address = DEFAULT_MEM_BASE,
+ .pci_dac_offset = TSUNAMI_DAC_OFFSET,
+
+ .nr_irqs = 64,
+ .device_interrupt = dp264_device_interrupt,
+
+ .init_arch = webbrick_init_arch,
+ .init_irq = dp264_init_irq,
+ .init_rtc = common_init_rtc,
+ .init_pci = common_init_pci,
+ .kill_arch = tsunami_kill_arch,
+ .pci_map_irq = webbrick_map_irq,
+ .pci_swizzle = common_swizzle,
+};
+
+struct alpha_machine_vector clipper_mv __initmv = {
+ .vector_name = "Clipper",
+ DO_EV6_MMU,
+ DO_DEFAULT_RTC,
+ DO_TSUNAMI_IO,
+ .machine_check = tsunami_machine_check,
+ .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
+ .min_io_address = DEFAULT_IO_BASE,
+ .min_mem_address = DEFAULT_MEM_BASE,
+ .pci_dac_offset = TSUNAMI_DAC_OFFSET,
+
+ .nr_irqs = 64,
+ .device_interrupt = dp264_device_interrupt,
+
+ .init_arch = tsunami_init_arch,
+ .init_irq = clipper_init_irq,
+ .init_rtc = common_init_rtc,
+ .init_pci = common_init_pci,
+ .kill_arch = tsunami_kill_arch,
+ .pci_map_irq = clipper_map_irq,
+ .pci_swizzle = common_swizzle,
+};
+
+/* Sharks strongly resemble Clipper, at least as far
+ * as interrupt routing, etc, so we're using the
+ * same functions as Clipper does
+ */
+
+struct alpha_machine_vector shark_mv __initmv = {
+ .vector_name = "Shark",
+ DO_EV6_MMU,
+ DO_DEFAULT_RTC,
+ DO_TSUNAMI_IO,
+ .machine_check = tsunami_machine_check,
+ .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
+ .min_io_address = DEFAULT_IO_BASE,
+ .min_mem_address = DEFAULT_MEM_BASE,
+ .pci_dac_offset = TSUNAMI_DAC_OFFSET,
+
+ .nr_irqs = 64,
+ .device_interrupt = dp264_device_interrupt,
+
+ .init_arch = tsunami_init_arch,
+ .init_irq = clipper_init_irq,
+ .init_rtc = common_init_rtc,
+ .init_pci = common_init_pci,
+ .kill_arch = tsunami_kill_arch,
+ .pci_map_irq = clipper_map_irq,
+ .pci_swizzle = common_swizzle,
+};
+
+/* No alpha_mv alias for webbrick/monet/clipper, since we compile them
+ in unconditionally with DP264; setup_arch knows how to cope. */