Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/ppc64/kernel/vector.S b/arch/ppc64/kernel/vector.S
new file mode 100644
index 0000000..b79d33e
--- /dev/null
+++ b/arch/ppc64/kernel/vector.S
@@ -0,0 +1,172 @@
+#include <asm/ppc_asm.h>
+#include <asm/processor.h>
+
+/*
+ * The routines below are in assembler so we can closely control the
+ * usage of floating-point registers. These routines must be called
+ * with preempt disabled.
+ */
+ .section ".toc","aw"
+fpzero:
+ .tc FD_0_0[TC],0
+fpone:
+ .tc FD_3ff00000_0[TC],0x3ff0000000000000 /* 1.0 */
+fphalf:
+ .tc FD_3fe00000_0[TC],0x3fe0000000000000 /* 0.5 */
+
+ .text
+/*
+ * Internal routine to enable floating point and set FPSCR to 0.
+ * Don't call it from C; it doesn't use the normal calling convention.
+ */
+fpenable:
+ mfmsr r10
+ ori r11,r10,MSR_FP
+ mtmsr r11
+ isync
+ stfd fr31,-8(r1)
+ stfd fr0,-16(r1)
+ stfd fr1,-24(r1)
+ mffs fr31
+ lfd fr1,fpzero@toc(r2)
+ mtfsf 0xff,fr1
+ blr
+
+fpdisable:
+ mtlr r12
+ mtfsf 0xff,fr31
+ lfd fr1,-24(r1)
+ lfd fr0,-16(r1)
+ lfd fr31,-8(r1)
+ mtmsr r10
+ isync
+ blr
+
+/*
+ * Vector add, floating point.
+ */
+_GLOBAL(vaddfp)
+ mflr r12
+ bl fpenable
+ li r0,4
+ mtctr r0
+ li r6,0
+1: lfsx fr0,r4,r6
+ lfsx fr1,r5,r6
+ fadds fr0,fr0,fr1
+ stfsx fr0,r3,r6
+ addi r6,r6,4
+ bdnz 1b
+ b fpdisable
+
+/*
+ * Vector subtract, floating point.
+ */
+_GLOBAL(vsubfp)
+ mflr r12
+ bl fpenable
+ li r0,4
+ mtctr r0
+ li r6,0
+1: lfsx fr0,r4,r6
+ lfsx fr1,r5,r6
+ fsubs fr0,fr0,fr1
+ stfsx fr0,r3,r6
+ addi r6,r6,4
+ bdnz 1b
+ b fpdisable
+
+/*
+ * Vector multiply and add, floating point.
+ */
+_GLOBAL(vmaddfp)
+ mflr r12
+ bl fpenable
+ stfd fr2,-32(r1)
+ li r0,4
+ mtctr r0
+ li r7,0
+1: lfsx fr0,r4,r7
+ lfsx fr1,r5,r7
+ lfsx fr2,r6,r7
+ fmadds fr0,fr0,fr2,fr1
+ stfsx fr0,r3,r7
+ addi r7,r7,4
+ bdnz 1b
+ lfd fr2,-32(r1)
+ b fpdisable
+
+/*
+ * Vector negative multiply and subtract, floating point.
+ */
+_GLOBAL(vnmsubfp)
+ mflr r12
+ bl fpenable
+ stfd fr2,-32(r1)
+ li r0,4
+ mtctr r0
+ li r7,0
+1: lfsx fr0,r4,r7
+ lfsx fr1,r5,r7
+ lfsx fr2,r6,r7
+ fnmsubs fr0,fr0,fr2,fr1
+ stfsx fr0,r3,r7
+ addi r7,r7,4
+ bdnz 1b
+ lfd fr2,-32(r1)
+ b fpdisable
+
+/*
+ * Vector reciprocal estimate. We just compute 1.0/x.
+ * r3 -> destination, r4 -> source.
+ */
+_GLOBAL(vrefp)
+ mflr r12
+ bl fpenable
+ li r0,4
+ lfd fr1,fpone@toc(r2)
+ mtctr r0
+ li r6,0
+1: lfsx fr0,r4,r6
+ fdivs fr0,fr1,fr0
+ stfsx fr0,r3,r6
+ addi r6,r6,4
+ bdnz 1b
+ b fpdisable
+
+/*
+ * Vector reciprocal square-root estimate, floating point.
+ * We use the frsqrte instruction for the initial estimate followed
+ * by 2 iterations of Newton-Raphson to get sufficient accuracy.
+ * r3 -> destination, r4 -> source.
+ */
+_GLOBAL(vrsqrtefp)
+ mflr r12
+ bl fpenable
+ stfd fr2,-32(r1)
+ stfd fr3,-40(r1)
+ stfd fr4,-48(r1)
+ stfd fr5,-56(r1)
+ li r0,4
+ lfd fr4,fpone@toc(r2)
+ lfd fr5,fphalf@toc(r2)
+ mtctr r0
+ li r6,0
+1: lfsx fr0,r4,r6
+ frsqrte fr1,fr0 /* r = frsqrte(s) */
+ fmuls fr3,fr1,fr0 /* r * s */
+ fmuls fr2,fr1,fr5 /* r * 0.5 */
+ fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */
+ fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */
+ fmuls fr3,fr1,fr0 /* r * s */
+ fmuls fr2,fr1,fr5 /* r * 0.5 */
+ fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */
+ fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */
+ stfsx fr1,r3,r6
+ addi r6,r6,4
+ bdnz 1b
+ lfd fr5,-56(r1)
+ lfd fr4,-48(r1)
+ lfd fr3,-40(r1)
+ lfd fr2,-32(r1)
+ b fpdisable