Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/v850/kernel/fpga85e2c.ld b/arch/v850/kernel/fpga85e2c.ld
new file mode 100644
index 0000000..b5d4578
--- /dev/null
+++ b/arch/v850/kernel/fpga85e2c.ld
@@ -0,0 +1,62 @@
+/* Linker script for the FPGA implementation of the V850E2 NA85E2C cpu core
+ (CONFIG_V850E2_FPGA85E2C). */
+
+MEMORY {
+ /* Reset vector. */
+ RESET : ORIGIN = 0, LENGTH = 0x10
+ /* Interrupt vectors. */
+ INTV : ORIGIN = 0x10, LENGTH = 0x470
+ /* The `window' in RAM were we're allowed to load stuff. */
+ RAM_LOW : ORIGIN = 0x480, LENGTH = 0x0005FB80
+ /* Some more ram above the window were we can put bss &c. */
+ RAM_HIGH : ORIGIN = 0x00060000, LENGTH = 0x000A0000
+ /* This is the area visible from the outside world (we can use
+ this only for uninitialized data). */
+ VISIBLE : ORIGIN = 0x00200000, LENGTH = 0x00060000
+}
+
+SECTIONS {
+ .reset : {
+ __kram_start = . ;
+ __intv_start = . ;
+ *(.intv.reset) /* Reset vector */
+ } > RESET
+
+ .ram_low : {
+ __r0_ram = . ; /* Must be near address 0. */
+ . = . + 32 ;
+
+ TEXT_CONTENTS
+ DATA_CONTENTS
+ ROOT_FS_CONTENTS
+ RAMK_INIT_CONTENTS_NO_END
+ INITRAMFS_CONTENTS
+ } > RAM_LOW
+
+ /* Where the interrupt vectors are initially loaded. */
+ __intv_load_start = . ;
+
+ .intv : {
+ *(.intv.common) /* Vectors common to all v850e proc. */
+ *(.intv.mach) /* Machine-specific int. vectors. */
+ __intv_end = . ;
+ } > INTV AT> RAM_LOW
+
+ .ram_high : {
+ /* This is here so that when we free init memory the
+ load-time copy of the interrupt vectors and any empty
+ space at the end of the `RAM_LOW' area is freed too. */
+ . = ALIGN (4096);
+ __init_end = . ;
+
+ BSS_CONTENTS
+ __kram_end = . ;
+ BOOTMAP_CONTENTS
+ } > RAM_HIGH
+
+ .visible : {
+ _memcons_output = . ;
+ . = . + 0x8000 ;
+ _memcons_output_end = . ;
+ } > VISIBLE
+}