Blackfin arch: cleanup warnings from checkpatch -- no functional changes
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 3a29b4d1..c637353 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -37,12 +37,10 @@
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb_isp1362.h>
#endif
-#include <asm/irq.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <asm/bfin5xx_spi.h>
#include <linux/usb_sl811.h>
-
+#include <asm/bfin5xx_spi.h>
#include <linux/spi/ad7877.h>
/*
@@ -85,7 +83,7 @@
int __init bfin_isp1761_init(void)
{
- unsigned int num_devices=ARRAY_SIZE(bfin_isp1761_devices);
+ unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
@@ -107,15 +105,15 @@
.start = 0x20310000, /* IO PORT */
.end = 0x20312000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF4,
.end = IRQ_PF4,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },{
+ }, {
.start = 6, /* Card Detect PF6 */
.end = 6,
.flags = IORESOURCE_IRQ,
@@ -144,7 +142,7 @@
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
@@ -165,11 +163,11 @@
.start = 0x20340000,
.end = 0x20340000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20340004,
.end = 0x20340004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = CONFIG_USB_SL811_BFIN_IRQ,
.end = CONFIG_USB_SL811_BFIN_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
@@ -216,11 +214,11 @@
.start = 0x20360000,
.end = 0x20360000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20360004,
.end = 0x20360004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
@@ -261,7 +259,7 @@
.start = 0x20300000,
.end = 0x20300000 + 0x100,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
@@ -287,11 +285,11 @@
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
@@ -361,7 +359,6 @@
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-// .cs_change_per_word = 1,
.enable_dma = 0,
.bits_per_word = 16,
};
@@ -449,19 +446,19 @@
#endif
#if defined(CONFIG_PBX)
{
- .modalias = "fxs-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 3,
- .controller_data= &spi_si3xxx_chip_info,
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 3,
+ .controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
- .modalias = "fxo-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 2,
- .controller_data= &spi_si3xxx_chip_info,
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
#endif
@@ -516,7 +513,7 @@
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,