| /* Changes made by Lineo Inc.    May 2001 | 
 |  * | 
 |  * Based on: include/asm-m68knommu/uaccess.h | 
 |  */ | 
 |  | 
 | #ifndef __BLACKFIN_UACCESS_H | 
 | #define __BLACKFIN_UACCESS_H | 
 |  | 
 | /* | 
 |  * User space memory access functions | 
 |  */ | 
 | #include <linux/sched.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/string.h> | 
 |  | 
 | #include <asm/segment.h> | 
 | #ifdef CONFIG_ACCESS_CHECK | 
 | # include <asm/bfin-global.h> | 
 | #endif | 
 |  | 
 | #define get_ds()        (KERNEL_DS) | 
 | #define get_fs()        (current_thread_info()->addr_limit) | 
 |  | 
 | static inline void set_fs(mm_segment_t fs) | 
 | { | 
 | 	current_thread_info()->addr_limit = fs; | 
 | } | 
 |  | 
 | #define segment_eq(a,b) ((a) == (b)) | 
 |  | 
 | #define VERIFY_READ	0 | 
 | #define VERIFY_WRITE	1 | 
 |  | 
 | #define access_ok(type, addr, size) _access_ok((unsigned long)(addr), (size)) | 
 |  | 
 | static inline int is_in_rom(unsigned long addr) | 
 | { | 
 | 	/* | 
 | 	 * What we are really trying to do is determine if addr is | 
 | 	 * in an allocated kernel memory region. If not then assume | 
 | 	 * we cannot free it or otherwise de-allocate it. Ideally | 
 | 	 * we could restrict this to really being in a ROM or flash, | 
 | 	 * but that would need to be done on a board by board basis, | 
 | 	 * not globally. | 
 | 	 */ | 
 | 	if ((addr < _ramstart) || (addr >= _ramend)) | 
 | 		return (1); | 
 |  | 
 | 	/* Default case, not in ROM */ | 
 | 	return (0); | 
 | } | 
 |  | 
 | /* | 
 |  * The fs value determines whether argument validity checking should be | 
 |  * performed or not.  If get_fs() == USER_DS, checking is performed, with | 
 |  * get_fs() == KERNEL_DS, checking is bypassed. | 
 |  */ | 
 |  | 
 | #ifndef CONFIG_ACCESS_CHECK | 
 | static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; } | 
 | #else | 
 | #ifdef CONFIG_ACCESS_OK_L1 | 
 | extern int _access_ok(unsigned long addr, unsigned long size)__attribute__((l1_text)); | 
 | #else | 
 | extern int _access_ok(unsigned long addr, unsigned long size); | 
 | #endif | 
 | #endif | 
 |  | 
 | /* | 
 |  * The exception table consists of pairs of addresses: the first is the | 
 |  * address of an instruction that is allowed to fault, and the second is | 
 |  * the address at which the program should continue.  No registers are | 
 |  * modified, so it is entirely up to the continuation code to figure out | 
 |  * what to do. | 
 |  * | 
 |  * All the routines below use bits of fixup code that are out of line | 
 |  * with the main instruction path.  This means when everything is well, | 
 |  * we don't even have to jump over them.  Further, they do not intrude | 
 |  * on our cache or tlb entries. | 
 |  */ | 
 |  | 
 | struct exception_table_entry { | 
 | 	unsigned long insn, fixup; | 
 | }; | 
 |  | 
 | /* Returns 0 if exception not found and fixup otherwise.  */ | 
 | extern unsigned long search_exception_table(unsigned long); | 
 |  | 
 | /* | 
 |  * These are the main single-value transfer routines.  They automatically | 
 |  * use the right size if we just have the right pointer type. | 
 |  */ | 
 |  | 
 | #define put_user(x,p)						\ | 
 | 	({							\ | 
 | 		int _err = 0;					\ | 
 | 		typeof(*(p)) _x = (x);				\ | 
 | 		typeof(*(p)) *_p = (p);				\ | 
 | 		if (!access_ok(VERIFY_WRITE, _p, sizeof(*(_p)))) {\ | 
 | 			_err = -EFAULT;				\ | 
 | 		}						\ | 
 | 		else {						\ | 
 | 		switch (sizeof (*(_p))) {			\ | 
 | 		case 1:						\ | 
 | 			__put_user_asm(_x, _p, B);		\ | 
 | 			break;					\ | 
 | 		case 2:						\ | 
 | 			__put_user_asm(_x, _p, W);		\ | 
 | 			break;					\ | 
 | 		case 4:						\ | 
 | 			__put_user_asm(_x, _p,  );		\ | 
 | 			break;					\ | 
 | 		case 8: {					\ | 
 | 			long _xl, _xh;				\ | 
 | 			_xl = ((long *)&_x)[0];			\ | 
 | 			_xh = ((long *)&_x)[1];			\ | 
 | 			__put_user_asm(_xl, ((long *)_p)+0, );	\ | 
 | 			__put_user_asm(_xh, ((long *)_p)+1, );	\ | 
 | 		} break;					\ | 
 | 		default:					\ | 
 | 			_err = __put_user_bad();		\ | 
 | 			break;					\ | 
 | 		}						\ | 
 | 		}						\ | 
 | 		_err;						\ | 
 | 	}) | 
 |  | 
 | #define __put_user(x,p) put_user(x,p) | 
 | static inline int bad_user_access_length(void) | 
 | { | 
 | 	panic("bad_user_access_length"); | 
 | 	return -1; | 
 | } | 
 |  | 
 | #define __put_user_bad() (printk(KERN_INFO "put_user_bad %s:%d %s\n",\ | 
 |                            __FILE__, __LINE__, __func__),\ | 
 |                            bad_user_access_length(), (-EFAULT)) | 
 |  | 
 | /* | 
 |  * Tell gcc we read from memory instead of writing: this is because | 
 |  * we do not write to any memory gcc knows about, so there are no | 
 |  * aliasing issues. | 
 |  */ | 
 |  | 
 | #define __ptr(x) ((unsigned long *)(x)) | 
 |  | 
 | #define __put_user_asm(x,p,bhw)				\ | 
 | 	__asm__ (#bhw"[%1] = %0;\n\t"			\ | 
 | 		 : /* no outputs */			\ | 
 | 		 :"d" (x),"a" (__ptr(p)) : "memory") | 
 |  | 
 | #define get_user(x,p)							\ | 
 | 	({								\ | 
 | 		int _err = 0;						\ | 
 | 		typeof(*(p)) *_p = (p);					\ | 
 | 		if (!access_ok(VERIFY_READ, _p, sizeof(*(_p)))) {	\ | 
 | 			_err = -EFAULT;					\ | 
 | 		}							\ | 
 | 		else {							\ | 
 | 		switch (sizeof(*(_p))) {				\ | 
 | 		case 1:							\ | 
 | 			__get_user_asm(x, _p, B,(Z));			\ | 
 | 			break;						\ | 
 | 		case 2:							\ | 
 | 			__get_user_asm(x, _p, W,(Z));			\ | 
 | 			break;						\ | 
 | 		case 4:							\ | 
 | 			__get_user_asm(x, _p,  , );			\ | 
 | 			break;						\ | 
 | 		case 8: {						\ | 
 | 			unsigned long _xl, _xh;				\ | 
 | 			__get_user_asm(_xl, ((unsigned long *)_p)+0,  , ); \ | 
 | 			__get_user_asm(_xh, ((unsigned long *)_p)+1,  , ); \ | 
 | 			((unsigned long *)&x)[0] = _xl;			\ | 
 | 			((unsigned long *)&x)[1] = _xh;			\ | 
 | 		} break;						\ | 
 | 		default:						\ | 
 | 			x = 0;						\ | 
 | 			printk(KERN_INFO "get_user_bad: %s:%d %s\n",    \ | 
 | 			       __FILE__, __LINE__, __func__);	\ | 
 | 			_err = __get_user_bad();			\ | 
 | 			break;						\ | 
 | 		}							\ | 
 | 		}							\ | 
 | 		_err;							\ | 
 | 	}) | 
 |  | 
 | #define __get_user(x,p) get_user(x,p) | 
 |  | 
 | #define __get_user_bad() (bad_user_access_length(), (-EFAULT)) | 
 |  | 
 | #define __get_user_asm(x,p,bhw,option)				\ | 
 | 	{							\ | 
 | 		unsigned long _tmp;				\ | 
 | 		__asm__ ("%0 =" #bhw "[%1]"#option";\n\t"	\ | 
 | 			 : "=d" (_tmp)				\ | 
 | 			 : "a" (__ptr(p)));			\ | 
 | 		(x) = (__typeof__(*(p))) _tmp;			\ | 
 | 	} | 
 |  | 
 | #define __copy_from_user(to, from, n) copy_from_user(to, from, n) | 
 | #define __copy_to_user(to, from, n) copy_to_user(to, from, n) | 
 | #define __copy_to_user_inatomic __copy_to_user | 
 | #define __copy_from_user_inatomic __copy_from_user | 
 |  | 
 | #define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n))\ | 
 | 				                 return retval; }) | 
 |  | 
 | #define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n))\ | 
 |                                                    return retval; }) | 
 |  | 
 | static inline long copy_from_user(void *to, | 
 | 				  const void __user * from, unsigned long n) | 
 | { | 
 | 	if (access_ok(VERIFY_READ, from, n)) | 
 | 		memcpy(to, from, n); | 
 | 	else | 
 | 		return n; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline long copy_to_user(void *to, | 
 | 				const void __user * from, unsigned long n) | 
 | { | 
 | 	if (access_ok(VERIFY_WRITE, to, n)) | 
 | 		memcpy(to, from, n); | 
 | 	else | 
 | 		return n; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Copy a null terminated string from userspace. | 
 |  */ | 
 |  | 
 | static inline long strncpy_from_user(char *dst, | 
 |                                      const char *src, long count) | 
 | { | 
 | 	char *tmp; | 
 | 	if (!access_ok(VERIFY_READ, src, 1)) | 
 | 		return -EFAULT; | 
 | 	strncpy(dst, src, count); | 
 | 	for (tmp = dst; *tmp && count > 0; tmp++, count--) ; | 
 | 	return (tmp - dst); | 
 | } | 
 |  | 
 | /* | 
 |  * Return the size of a string (including the ending 0) | 
 |  * | 
 |  * Return 0 on exception, a value greater than N if too long | 
 |  */ | 
 | static inline long strnlen_user(const char *src, long n) | 
 | { | 
 | 	return (strlen(src) + 1); | 
 | } | 
 |  | 
 | #define strlen_user(str) strnlen_user(str, 32767) | 
 |  | 
 | /* | 
 |  * Zero Userspace | 
 |  */ | 
 |  | 
 | static inline unsigned long __clear_user(void *to, unsigned long n) | 
 | { | 
 | 	memset(to, 0, n); | 
 | 	return 0; | 
 | } | 
 |  | 
 | #define clear_user(to, n) __clear_user(to, n) | 
 |  | 
 | #endif				/* _BLACKFIN_UACCESS_H */ |