nfc: Convert nfc_dbg to pr_debug
Using the standard debugging mechanisms is better than
subsystem specific ones when the subsystem doesn't use
a specific struct.
Coalesce long formats.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/net/nfc/nci/rsp.c b/net/nfc/nci/rsp.c
index 6f51a28..f00c2ab 100644
--- a/net/nfc/nci/rsp.c
+++ b/net/nfc/nci/rsp.c
@@ -42,12 +42,12 @@
{
struct nci_core_reset_rsp *rsp = (void *) skb->data;
- nfc_dbg("entry, status 0x%x", rsp->status);
+ pr_debug("entry, status 0x%x\n", rsp->status);
if (rsp->status == NCI_STATUS_OK) {
ndev->nci_ver = rsp->nci_ver;
- nfc_dbg("nci_ver 0x%x, config_status 0x%x",
- rsp->nci_ver, rsp->config_status);
+ pr_debug("nci_ver 0x%x, config_status 0x%x\n",
+ rsp->nci_ver, rsp->config_status);
}
nci_req_complete(ndev, rsp->status);
@@ -58,7 +58,7 @@
struct nci_core_init_rsp_1 *rsp_1 = (void *) skb->data;
struct nci_core_init_rsp_2 *rsp_2;
- nfc_dbg("entry, status 0x%x", rsp_1->status);
+ pr_debug("entry, status 0x%x\n", rsp_1->status);
if (rsp_1->status != NCI_STATUS_OK)
goto exit;
@@ -97,34 +97,34 @@
atomic_set(&ndev->credits_cnt, ndev->initial_num_credits);
- nfc_dbg("nfcc_features 0x%x",
- ndev->nfcc_features);
- nfc_dbg("num_supported_rf_interfaces %d",
- ndev->num_supported_rf_interfaces);
- nfc_dbg("supported_rf_interfaces[0] 0x%x",
- ndev->supported_rf_interfaces[0]);
- nfc_dbg("supported_rf_interfaces[1] 0x%x",
- ndev->supported_rf_interfaces[1]);
- nfc_dbg("supported_rf_interfaces[2] 0x%x",
- ndev->supported_rf_interfaces[2]);
- nfc_dbg("supported_rf_interfaces[3] 0x%x",
- ndev->supported_rf_interfaces[3]);
- nfc_dbg("max_logical_connections %d",
- ndev->max_logical_connections);
- nfc_dbg("max_routing_table_size %d",
- ndev->max_routing_table_size);
- nfc_dbg("max_ctrl_pkt_payload_len %d",
- ndev->max_ctrl_pkt_payload_len);
- nfc_dbg("max_size_for_large_params %d",
- ndev->max_size_for_large_params);
- nfc_dbg("max_data_pkt_payload_size %d",
- ndev->max_data_pkt_payload_size);
- nfc_dbg("initial_num_credits %d",
- ndev->initial_num_credits);
- nfc_dbg("manufact_id 0x%x",
- ndev->manufact_id);
- nfc_dbg("manufact_specific_info 0x%x",
- ndev->manufact_specific_info);
+ pr_debug("nfcc_features 0x%x\n",
+ ndev->nfcc_features);
+ pr_debug("num_supported_rf_interfaces %d\n",
+ ndev->num_supported_rf_interfaces);
+ pr_debug("supported_rf_interfaces[0] 0x%x\n",
+ ndev->supported_rf_interfaces[0]);
+ pr_debug("supported_rf_interfaces[1] 0x%x\n",
+ ndev->supported_rf_interfaces[1]);
+ pr_debug("supported_rf_interfaces[2] 0x%x\n",
+ ndev->supported_rf_interfaces[2]);
+ pr_debug("supported_rf_interfaces[3] 0x%x\n",
+ ndev->supported_rf_interfaces[3]);
+ pr_debug("max_logical_connections %d\n",
+ ndev->max_logical_connections);
+ pr_debug("max_routing_table_size %d\n",
+ ndev->max_routing_table_size);
+ pr_debug("max_ctrl_pkt_payload_len %d\n",
+ ndev->max_ctrl_pkt_payload_len);
+ pr_debug("max_size_for_large_params %d\n",
+ ndev->max_size_for_large_params);
+ pr_debug("max_data_pkt_payload_size %d\n",
+ ndev->max_data_pkt_payload_size);
+ pr_debug("initial_num_credits %d\n",
+ ndev->initial_num_credits);
+ pr_debug("manufact_id 0x%x\n",
+ ndev->manufact_id);
+ pr_debug("manufact_specific_info 0x%x\n",
+ ndev->manufact_specific_info);
exit:
nci_req_complete(ndev, rsp_1->status);
@@ -135,7 +135,7 @@
{
__u8 status = skb->data[0];
- nfc_dbg("entry, status 0x%x", status);
+ pr_debug("entry, status 0x%x\n", status);
nci_req_complete(ndev, status);
}
@@ -144,7 +144,7 @@
{
__u8 status = skb->data[0];
- nfc_dbg("entry, status 0x%x", status);
+ pr_debug("entry, status 0x%x\n", status);
if (status == NCI_STATUS_OK)
set_bit(NCI_DISCOVERY, &ndev->flags);
@@ -157,7 +157,7 @@
{
__u8 status = skb->data[0];
- nfc_dbg("entry, status 0x%x", status);
+ pr_debug("entry, status 0x%x\n", status);
clear_bit(NCI_DISCOVERY, &ndev->flags);
@@ -171,11 +171,11 @@
/* we got a rsp, stop the cmd timer */
del_timer(&ndev->cmd_timer);
- nfc_dbg("NCI RX: MT=rsp, PBF=%d, GID=0x%x, OID=0x%x, plen=%d",
- nci_pbf(skb->data),
- nci_opcode_gid(rsp_opcode),
- nci_opcode_oid(rsp_opcode),
- nci_plen(skb->data));
+ pr_debug("NCI RX: MT=rsp, PBF=%d, GID=0x%x, OID=0x%x, plen=%d\n",
+ nci_pbf(skb->data),
+ nci_opcode_gid(rsp_opcode),
+ nci_opcode_oid(rsp_opcode),
+ nci_plen(skb->data));
/* strip the nci control header */
skb_pull(skb, NCI_CTRL_HDR_SIZE);