[NET]: Undo code bloat in hot paths due to print_mac().
If print_mac() is used inside of a pr_debug() the compiler
can't see that the call is redundant so still performs it
even of pr_debug() ends up being a nop.
So don't use print_mac() in such cases in hot code paths,
use MAC_FMT et al. instead.
As noted by Joe Perches, pr_debug() could be modified to
handle this better, but that is a change to an interface
used by the entire kernel and thus needs to be validated
carefully. This here is thus the less risky fix for
2.6.25
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/net/atm/lec.c b/net/atm/lec.c
index a2efa7f..3235c57 100644
--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -266,7 +266,6 @@
char buf[300];
int i = 0;
#endif /* DUMP_PACKETS >0 */
- DECLARE_MAC_BUF(mac);
pr_debug("lec_start_xmit called\n");
if (!priv->lecd) {
@@ -374,15 +373,19 @@
if (entry && (entry->tx_wait.qlen < LEC_UNRES_QUE_LEN)) {
pr_debug("%s:lec_start_xmit: queuing packet, ",
dev->name);
- pr_debug("MAC address %s\n",
- print_mac(mac, lec_h->h_dest));
+ pr_debug("MAC address " MAC_FMT "\n",
+ lec_h->h_dest[0], lec_h->h_dest[1],
+ lec_h->h_dest[2], lec_h->h_dest[3],
+ lec_h->h_dest[4], lec_h->h_dest[5]);
skb_queue_tail(&entry->tx_wait, skb);
} else {
pr_debug
("%s:lec_start_xmit: tx queue full or no arp entry, dropping, ",
dev->name);
- pr_debug("MAC address %s\n",
- print_mac(mac, lec_h->h_dest));
+ pr_debug("MAC address " MAC_FMT "\n",
+ lec_h->h_dest[0], lec_h->h_dest[1],
+ lec_h->h_dest[2], lec_h->h_dest[3],
+ lec_h->h_dest[4], lec_h->h_dest[5]);
priv->stats.tx_dropped++;
dev_kfree_skb(skb);
}
@@ -394,8 +397,10 @@
while (entry && (skb2 = skb_dequeue(&entry->tx_wait))) {
pr_debug("lec.c: emptying tx queue, ");
- pr_debug("MAC address %s\n",
- print_mac(mac, lec_h->h_dest));
+ pr_debug("MAC address " MAC_FMT "\n",
+ lec_h->h_dest[0], lec_h->h_dest[1],
+ lec_h->h_dest[2], lec_h->h_dest[3],
+ lec_h->h_dest[4], lec_h->h_dest[5]);
lec_send(vcc, skb2, priv);
}
@@ -449,7 +454,6 @@
struct lec_arp_table *entry;
int i;
char *tmp; /* FIXME */
- DECLARE_MAC_BUF(mac);
atomic_sub(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc);
mesg = (struct atmlec_msg *)skb->data;
@@ -536,9 +540,14 @@
struct net_bridge_fdb_entry *f;
pr_debug
- ("%s: bridge zeppelin asks about %s\n",
+ ("%s: bridge zeppelin asks about " MAC_FMT "\n",
dev->name,
- print_mac(mac, mesg->content.proxy.mac_addr));
+ mesg->content.proxy.mac_addr[0],
+ mesg->content.proxy.mac_addr[1],
+ mesg->content.proxy.mac_addr[2],
+ mesg->content.proxy.mac_addr[3],
+ mesg->content.proxy.mac_addr[4],
+ mesg->content.proxy.mac_addr[5]);
if (br_fdb_get_hook == NULL || dev->br_port == NULL)
break;
diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c
index 1e3f87c..200ee1e 100644
--- a/net/ieee80211/ieee80211_rx.c
+++ b/net/ieee80211/ieee80211_rx.c
@@ -271,7 +271,6 @@
{
struct ieee80211_hdr_3addr *hdr;
int res, hdrlen;
- DECLARE_MAC_BUF(mac);
if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
return 0;
@@ -283,8 +282,12 @@
res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
atomic_dec(&crypt->refcnt);
if (res < 0) {
- IEEE80211_DEBUG_DROP("decryption failed (SA=%s"
- ") res=%d\n", print_mac(mac, hdr->addr2), res);
+ IEEE80211_DEBUG_DROP("decryption failed (SA=" MAC_FMT
+ ") res=%d\n",
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5],
+ res);
if (res == -2)
IEEE80211_DEBUG_DROP("Decryption failed ICV "
"mismatch (key %d)\n",
@@ -304,7 +307,6 @@
{
struct ieee80211_hdr_3addr *hdr;
int res, hdrlen;
- DECLARE_MAC_BUF(mac);
if (crypt == NULL || crypt->ops->decrypt_msdu == NULL)
return 0;
@@ -317,8 +319,12 @@
atomic_dec(&crypt->refcnt);
if (res < 0) {
printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed"
- " (SA=%s keyidx=%d)\n",
- ieee->dev->name, print_mac(mac, hdr->addr2), keyidx);
+ " (SA=" MAC_FMT " keyidx=%d)\n",
+ ieee->dev->name,
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5],
+ keyidx);
return -1;
}
@@ -462,8 +468,10 @@
* frames silently instead of filling system log with
* these reports. */
IEEE80211_DEBUG_DROP("Decryption failed (not set)"
- " (SA=%s)\n",
- print_mac(mac, hdr->addr2));
+ " (SA=" MAC_FMT ")\n",
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5]);
ieee->ieee_stats.rx_discards_undecryptable++;
goto rx_dropped;
}
@@ -474,8 +482,10 @@
fc & IEEE80211_FCTL_PROTECTED && ieee->host_decrypt &&
(keyidx = hostap_rx_frame_decrypt(ieee, skb, crypt)) < 0) {
printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
- "from %s\n", dev->name,
- print_mac(mac, hdr->addr2));
+ "from " MAC_FMT "\n", dev->name,
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5]);
/* TODO: could inform hostapd about this so that it
* could send auth failure report */
goto rx_dropped;
@@ -653,8 +663,11 @@
* configured */
} else {
IEEE80211_DEBUG_DROP("encryption configured, but RX "
- "frame not encrypted (SA=%s"
- ")\n", print_mac(mac, hdr->addr2));
+ "frame not encrypted (SA="
+ MAC_FMT ")\n",
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5]);
goto rx_dropped;
}
}
@@ -662,9 +675,11 @@
if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !ieee->open_wep &&
!ieee80211_is_eapol_frame(ieee, skb)) {
IEEE80211_DEBUG_DROP("dropped unencrypted RX data "
- "frame from %s"
+ "frame from " MAC_FMT
" (drop_unencrypted=1)\n",
- print_mac(mac, hdr->addr2));
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5]);
goto rx_dropped;
}