| /* | 
 |  *  linux/fs/ext3/balloc.c | 
 |  * | 
 |  * Copyright (C) 1992, 1993, 1994, 1995 | 
 |  * Remy Card (card@masi.ibp.fr) | 
 |  * Laboratoire MASI - Institut Blaise Pascal | 
 |  * Universite Pierre et Marie Curie (Paris VI) | 
 |  * | 
 |  *  Enhanced block allocation by Stephen Tweedie (sct@redhat.com), 1993 | 
 |  *  Big-endian to little-endian byte-swapping/bitmaps by | 
 |  *        David S. Miller (davem@caip.rutgers.edu), 1995 | 
 |  */ | 
 |  | 
 | #include <linux/time.h> | 
 | #include <linux/capability.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/jbd.h> | 
 | #include <linux/ext3_fs.h> | 
 | #include <linux/ext3_jbd.h> | 
 | #include <linux/quotaops.h> | 
 | #include <linux/buffer_head.h> | 
 |  | 
 | /* | 
 |  * balloc.c contains the blocks allocation and deallocation routines | 
 |  */ | 
 |  | 
 | /* | 
 |  * The free blocks are managed by bitmaps.  A file system contains several | 
 |  * blocks groups.  Each group contains 1 bitmap block for blocks, 1 bitmap | 
 |  * block for inodes, N blocks for the inode table and data blocks. | 
 |  * | 
 |  * The file system contains group descriptors which are located after the | 
 |  * super block.  Each descriptor contains the number of the bitmap block and | 
 |  * the free blocks count in the block.  The descriptors are loaded in memory | 
 |  * when a file system is mounted (see ext3_fill_super). | 
 |  */ | 
 |  | 
 |  | 
 | #define in_range(b, first, len)	((b) >= (first) && (b) <= (first) + (len) - 1) | 
 |  | 
 | /** | 
 |  * ext3_get_group_desc() -- load group descriptor from disk | 
 |  * @sb:			super block | 
 |  * @block_group:	given block group | 
 |  * @bh:			pointer to the buffer head to store the block | 
 |  *			group descriptor | 
 |  */ | 
 | struct ext3_group_desc * ext3_get_group_desc(struct super_block * sb, | 
 | 					     unsigned int block_group, | 
 | 					     struct buffer_head ** bh) | 
 | { | 
 | 	unsigned long group_desc; | 
 | 	unsigned long offset; | 
 | 	struct ext3_group_desc * desc; | 
 | 	struct ext3_sb_info *sbi = EXT3_SB(sb); | 
 |  | 
 | 	if (block_group >= sbi->s_groups_count) { | 
 | 		ext3_error (sb, "ext3_get_group_desc", | 
 | 			    "block_group >= groups_count - " | 
 | 			    "block_group = %d, groups_count = %lu", | 
 | 			    block_group, sbi->s_groups_count); | 
 |  | 
 | 		return NULL; | 
 | 	} | 
 | 	smp_rmb(); | 
 |  | 
 | 	group_desc = block_group >> EXT3_DESC_PER_BLOCK_BITS(sb); | 
 | 	offset = block_group & (EXT3_DESC_PER_BLOCK(sb) - 1); | 
 | 	if (!sbi->s_group_desc[group_desc]) { | 
 | 		ext3_error (sb, "ext3_get_group_desc", | 
 | 			    "Group descriptor not loaded - " | 
 | 			    "block_group = %d, group_desc = %lu, desc = %lu", | 
 | 			     block_group, group_desc, offset); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	desc = (struct ext3_group_desc *) sbi->s_group_desc[group_desc]->b_data; | 
 | 	if (bh) | 
 | 		*bh = sbi->s_group_desc[group_desc]; | 
 | 	return desc + offset; | 
 | } | 
 |  | 
 | static int ext3_valid_block_bitmap(struct super_block *sb, | 
 | 					struct ext3_group_desc *desc, | 
 | 					unsigned int block_group, | 
 | 					struct buffer_head *bh) | 
 | { | 
 | 	ext3_grpblk_t offset; | 
 | 	ext3_grpblk_t next_zero_bit; | 
 | 	ext3_fsblk_t bitmap_blk; | 
 | 	ext3_fsblk_t group_first_block; | 
 |  | 
 | 	group_first_block = ext3_group_first_block_no(sb, block_group); | 
 |  | 
 | 	/* check whether block bitmap block number is set */ | 
 | 	bitmap_blk = le32_to_cpu(desc->bg_block_bitmap); | 
 | 	offset = bitmap_blk - group_first_block; | 
 | 	if (!ext3_test_bit(offset, bh->b_data)) | 
 | 		/* bad block bitmap */ | 
 | 		goto err_out; | 
 |  | 
 | 	/* check whether the inode bitmap block number is set */ | 
 | 	bitmap_blk = le32_to_cpu(desc->bg_inode_bitmap); | 
 | 	offset = bitmap_blk - group_first_block; | 
 | 	if (!ext3_test_bit(offset, bh->b_data)) | 
 | 		/* bad block bitmap */ | 
 | 		goto err_out; | 
 |  | 
 | 	/* check whether the inode table block number is set */ | 
 | 	bitmap_blk = le32_to_cpu(desc->bg_inode_table); | 
 | 	offset = bitmap_blk - group_first_block; | 
 | 	next_zero_bit = ext3_find_next_zero_bit(bh->b_data, | 
 | 				offset + EXT3_SB(sb)->s_itb_per_group, | 
 | 				offset); | 
 | 	if (next_zero_bit >= offset + EXT3_SB(sb)->s_itb_per_group) | 
 | 		/* good bitmap for inode tables */ | 
 | 		return 1; | 
 |  | 
 | err_out: | 
 | 	ext3_error(sb, __func__, | 
 | 			"Invalid block bitmap - " | 
 | 			"block_group = %d, block = %lu", | 
 | 			block_group, bitmap_blk); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * read_block_bitmap() | 
 |  * @sb:			super block | 
 |  * @block_group:	given block group | 
 |  * | 
 |  * Read the bitmap for a given block_group,and validate the | 
 |  * bits for block/inode/inode tables are set in the bitmaps | 
 |  * | 
 |  * Return buffer_head on success or NULL in case of failure. | 
 |  */ | 
 | static struct buffer_head * | 
 | read_block_bitmap(struct super_block *sb, unsigned int block_group) | 
 | { | 
 | 	struct ext3_group_desc * desc; | 
 | 	struct buffer_head * bh = NULL; | 
 | 	ext3_fsblk_t bitmap_blk; | 
 |  | 
 | 	desc = ext3_get_group_desc(sb, block_group, NULL); | 
 | 	if (!desc) | 
 | 		return NULL; | 
 | 	bitmap_blk = le32_to_cpu(desc->bg_block_bitmap); | 
 | 	bh = sb_getblk(sb, bitmap_blk); | 
 | 	if (unlikely(!bh)) { | 
 | 		ext3_error(sb, __func__, | 
 | 			    "Cannot read block bitmap - " | 
 | 			    "block_group = %d, block_bitmap = %u", | 
 | 			    block_group, le32_to_cpu(desc->bg_block_bitmap)); | 
 | 		return NULL; | 
 | 	} | 
 | 	if (likely(bh_uptodate_or_lock(bh))) | 
 | 		return bh; | 
 |  | 
 | 	if (bh_submit_read(bh) < 0) { | 
 | 		brelse(bh); | 
 | 		ext3_error(sb, __func__, | 
 | 			    "Cannot read block bitmap - " | 
 | 			    "block_group = %d, block_bitmap = %u", | 
 | 			    block_group, le32_to_cpu(desc->bg_block_bitmap)); | 
 | 		return NULL; | 
 | 	} | 
 | 	ext3_valid_block_bitmap(sb, desc, block_group, bh); | 
 | 	/* | 
 | 	 * file system mounted not to panic on error, continue with corrupt | 
 | 	 * bitmap | 
 | 	 */ | 
 | 	return bh; | 
 | } | 
 | /* | 
 |  * The reservation window structure operations | 
 |  * -------------------------------------------- | 
 |  * Operations include: | 
 |  * dump, find, add, remove, is_empty, find_next_reservable_window, etc. | 
 |  * | 
 |  * We use a red-black tree to represent per-filesystem reservation | 
 |  * windows. | 
 |  * | 
 |  */ | 
 |  | 
 | /** | 
 |  * __rsv_window_dump() -- Dump the filesystem block allocation reservation map | 
 |  * @rb_root:		root of per-filesystem reservation rb tree | 
 |  * @verbose:		verbose mode | 
 |  * @fn:			function which wishes to dump the reservation map | 
 |  * | 
 |  * If verbose is turned on, it will print the whole block reservation | 
 |  * windows(start, end).	Otherwise, it will only print out the "bad" windows, | 
 |  * those windows that overlap with their immediate neighbors. | 
 |  */ | 
 | #if 1 | 
 | static void __rsv_window_dump(struct rb_root *root, int verbose, | 
 | 			      const char *fn) | 
 | { | 
 | 	struct rb_node *n; | 
 | 	struct ext3_reserve_window_node *rsv, *prev; | 
 | 	int bad; | 
 |  | 
 | restart: | 
 | 	n = rb_first(root); | 
 | 	bad = 0; | 
 | 	prev = NULL; | 
 |  | 
 | 	printk("Block Allocation Reservation Windows Map (%s):\n", fn); | 
 | 	while (n) { | 
 | 		rsv = rb_entry(n, struct ext3_reserve_window_node, rsv_node); | 
 | 		if (verbose) | 
 | 			printk("reservation window 0x%p " | 
 | 			       "start:  %lu, end:  %lu\n", | 
 | 			       rsv, rsv->rsv_start, rsv->rsv_end); | 
 | 		if (rsv->rsv_start && rsv->rsv_start >= rsv->rsv_end) { | 
 | 			printk("Bad reservation %p (start >= end)\n", | 
 | 			       rsv); | 
 | 			bad = 1; | 
 | 		} | 
 | 		if (prev && prev->rsv_end >= rsv->rsv_start) { | 
 | 			printk("Bad reservation %p (prev->end >= start)\n", | 
 | 			       rsv); | 
 | 			bad = 1; | 
 | 		} | 
 | 		if (bad) { | 
 | 			if (!verbose) { | 
 | 				printk("Restarting reservation walk in verbose mode\n"); | 
 | 				verbose = 1; | 
 | 				goto restart; | 
 | 			} | 
 | 		} | 
 | 		n = rb_next(n); | 
 | 		prev = rsv; | 
 | 	} | 
 | 	printk("Window map complete.\n"); | 
 | 	BUG_ON(bad); | 
 | } | 
 | #define rsv_window_dump(root, verbose) \ | 
 | 	__rsv_window_dump((root), (verbose), __func__) | 
 | #else | 
 | #define rsv_window_dump(root, verbose) do {} while (0) | 
 | #endif | 
 |  | 
 | /** | 
 |  * goal_in_my_reservation() | 
 |  * @rsv:		inode's reservation window | 
 |  * @grp_goal:		given goal block relative to the allocation block group | 
 |  * @group:		the current allocation block group | 
 |  * @sb:			filesystem super block | 
 |  * | 
 |  * Test if the given goal block (group relative) is within the file's | 
 |  * own block reservation window range. | 
 |  * | 
 |  * If the reservation window is outside the goal allocation group, return 0; | 
 |  * grp_goal (given goal block) could be -1, which means no specific | 
 |  * goal block. In this case, always return 1. | 
 |  * If the goal block is within the reservation window, return 1; | 
 |  * otherwise, return 0; | 
 |  */ | 
 | static int | 
 | goal_in_my_reservation(struct ext3_reserve_window *rsv, ext3_grpblk_t grp_goal, | 
 | 			unsigned int group, struct super_block * sb) | 
 | { | 
 | 	ext3_fsblk_t group_first_block, group_last_block; | 
 |  | 
 | 	group_first_block = ext3_group_first_block_no(sb, group); | 
 | 	group_last_block = group_first_block + (EXT3_BLOCKS_PER_GROUP(sb) - 1); | 
 |  | 
 | 	if ((rsv->_rsv_start > group_last_block) || | 
 | 	    (rsv->_rsv_end < group_first_block)) | 
 | 		return 0; | 
 | 	if ((grp_goal >= 0) && ((grp_goal + group_first_block < rsv->_rsv_start) | 
 | 		|| (grp_goal + group_first_block > rsv->_rsv_end))) | 
 | 		return 0; | 
 | 	return 1; | 
 | } | 
 |  | 
 | /** | 
 |  * search_reserve_window() | 
 |  * @rb_root:		root of reservation tree | 
 |  * @goal:		target allocation block | 
 |  * | 
 |  * Find the reserved window which includes the goal, or the previous one | 
 |  * if the goal is not in any window. | 
 |  * Returns NULL if there are no windows or if all windows start after the goal. | 
 |  */ | 
 | static struct ext3_reserve_window_node * | 
 | search_reserve_window(struct rb_root *root, ext3_fsblk_t goal) | 
 | { | 
 | 	struct rb_node *n = root->rb_node; | 
 | 	struct ext3_reserve_window_node *rsv; | 
 |  | 
 | 	if (!n) | 
 | 		return NULL; | 
 |  | 
 | 	do { | 
 | 		rsv = rb_entry(n, struct ext3_reserve_window_node, rsv_node); | 
 |  | 
 | 		if (goal < rsv->rsv_start) | 
 | 			n = n->rb_left; | 
 | 		else if (goal > rsv->rsv_end) | 
 | 			n = n->rb_right; | 
 | 		else | 
 | 			return rsv; | 
 | 	} while (n); | 
 | 	/* | 
 | 	 * We've fallen off the end of the tree: the goal wasn't inside | 
 | 	 * any particular node.  OK, the previous node must be to one | 
 | 	 * side of the interval containing the goal.  If it's the RHS, | 
 | 	 * we need to back up one. | 
 | 	 */ | 
 | 	if (rsv->rsv_start > goal) { | 
 | 		n = rb_prev(&rsv->rsv_node); | 
 | 		rsv = rb_entry(n, struct ext3_reserve_window_node, rsv_node); | 
 | 	} | 
 | 	return rsv; | 
 | } | 
 |  | 
 | /** | 
 |  * ext3_rsv_window_add() -- Insert a window to the block reservation rb tree. | 
 |  * @sb:			super block | 
 |  * @rsv:		reservation window to add | 
 |  * | 
 |  * Must be called with rsv_lock hold. | 
 |  */ | 
 | void ext3_rsv_window_add(struct super_block *sb, | 
 | 		    struct ext3_reserve_window_node *rsv) | 
 | { | 
 | 	struct rb_root *root = &EXT3_SB(sb)->s_rsv_window_root; | 
 | 	struct rb_node *node = &rsv->rsv_node; | 
 | 	ext3_fsblk_t start = rsv->rsv_start; | 
 |  | 
 | 	struct rb_node ** p = &root->rb_node; | 
 | 	struct rb_node * parent = NULL; | 
 | 	struct ext3_reserve_window_node *this; | 
 |  | 
 | 	while (*p) | 
 | 	{ | 
 | 		parent = *p; | 
 | 		this = rb_entry(parent, struct ext3_reserve_window_node, rsv_node); | 
 |  | 
 | 		if (start < this->rsv_start) | 
 | 			p = &(*p)->rb_left; | 
 | 		else if (start > this->rsv_end) | 
 | 			p = &(*p)->rb_right; | 
 | 		else { | 
 | 			rsv_window_dump(root, 1); | 
 | 			BUG(); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	rb_link_node(node, parent, p); | 
 | 	rb_insert_color(node, root); | 
 | } | 
 |  | 
 | /** | 
 |  * ext3_rsv_window_remove() -- unlink a window from the reservation rb tree | 
 |  * @sb:			super block | 
 |  * @rsv:		reservation window to remove | 
 |  * | 
 |  * Mark the block reservation window as not allocated, and unlink it | 
 |  * from the filesystem reservation window rb tree. Must be called with | 
 |  * rsv_lock hold. | 
 |  */ | 
 | static void rsv_window_remove(struct super_block *sb, | 
 | 			      struct ext3_reserve_window_node *rsv) | 
 | { | 
 | 	rsv->rsv_start = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; | 
 | 	rsv->rsv_end = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; | 
 | 	rsv->rsv_alloc_hit = 0; | 
 | 	rb_erase(&rsv->rsv_node, &EXT3_SB(sb)->s_rsv_window_root); | 
 | } | 
 |  | 
 | /* | 
 |  * rsv_is_empty() -- Check if the reservation window is allocated. | 
 |  * @rsv:		given reservation window to check | 
 |  * | 
 |  * returns 1 if the end block is EXT3_RESERVE_WINDOW_NOT_ALLOCATED. | 
 |  */ | 
 | static inline int rsv_is_empty(struct ext3_reserve_window *rsv) | 
 | { | 
 | 	/* a valid reservation end block could not be 0 */ | 
 | 	return rsv->_rsv_end == EXT3_RESERVE_WINDOW_NOT_ALLOCATED; | 
 | } | 
 |  | 
 | /** | 
 |  * ext3_init_block_alloc_info() | 
 |  * @inode:		file inode structure | 
 |  * | 
 |  * Allocate and initialize the	reservation window structure, and | 
 |  * link the window to the ext3 inode structure at last | 
 |  * | 
 |  * The reservation window structure is only dynamically allocated | 
 |  * and linked to ext3 inode the first time the open file | 
 |  * needs a new block. So, before every ext3_new_block(s) call, for | 
 |  * regular files, we should check whether the reservation window | 
 |  * structure exists or not. In the latter case, this function is called. | 
 |  * Fail to do so will result in block reservation being turned off for that | 
 |  * open file. | 
 |  * | 
 |  * This function is called from ext3_get_blocks_handle(), also called | 
 |  * when setting the reservation window size through ioctl before the file | 
 |  * is open for write (needs block allocation). | 
 |  * | 
 |  * Needs truncate_mutex protection prior to call this function. | 
 |  */ | 
 | void ext3_init_block_alloc_info(struct inode *inode) | 
 | { | 
 | 	struct ext3_inode_info *ei = EXT3_I(inode); | 
 | 	struct ext3_block_alloc_info *block_i = ei->i_block_alloc_info; | 
 | 	struct super_block *sb = inode->i_sb; | 
 |  | 
 | 	block_i = kmalloc(sizeof(*block_i), GFP_NOFS); | 
 | 	if (block_i) { | 
 | 		struct ext3_reserve_window_node *rsv = &block_i->rsv_window_node; | 
 |  | 
 | 		rsv->rsv_start = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; | 
 | 		rsv->rsv_end = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; | 
 |  | 
 | 		/* | 
 | 		 * if filesystem is mounted with NORESERVATION, the goal | 
 | 		 * reservation window size is set to zero to indicate | 
 | 		 * block reservation is off | 
 | 		 */ | 
 | 		if (!test_opt(sb, RESERVATION)) | 
 | 			rsv->rsv_goal_size = 0; | 
 | 		else | 
 | 			rsv->rsv_goal_size = EXT3_DEFAULT_RESERVE_BLOCKS; | 
 | 		rsv->rsv_alloc_hit = 0; | 
 | 		block_i->last_alloc_logical_block = 0; | 
 | 		block_i->last_alloc_physical_block = 0; | 
 | 	} | 
 | 	ei->i_block_alloc_info = block_i; | 
 | } | 
 |  | 
 | /** | 
 |  * ext3_discard_reservation() | 
 |  * @inode:		inode | 
 |  * | 
 |  * Discard(free) block reservation window on last file close, or truncate | 
 |  * or at last iput(). | 
 |  * | 
 |  * It is being called in three cases: | 
 |  *	ext3_release_file(): last writer close the file | 
 |  *	ext3_clear_inode(): last iput(), when nobody link to this file. | 
 |  *	ext3_truncate(): when the block indirect map is about to change. | 
 |  * | 
 |  */ | 
 | void ext3_discard_reservation(struct inode *inode) | 
 | { | 
 | 	struct ext3_inode_info *ei = EXT3_I(inode); | 
 | 	struct ext3_block_alloc_info *block_i = ei->i_block_alloc_info; | 
 | 	struct ext3_reserve_window_node *rsv; | 
 | 	spinlock_t *rsv_lock = &EXT3_SB(inode->i_sb)->s_rsv_window_lock; | 
 |  | 
 | 	if (!block_i) | 
 | 		return; | 
 |  | 
 | 	rsv = &block_i->rsv_window_node; | 
 | 	if (!rsv_is_empty(&rsv->rsv_window)) { | 
 | 		spin_lock(rsv_lock); | 
 | 		if (!rsv_is_empty(&rsv->rsv_window)) | 
 | 			rsv_window_remove(inode->i_sb, rsv); | 
 | 		spin_unlock(rsv_lock); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * ext3_free_blocks_sb() -- Free given blocks and update quota | 
 |  * @handle:			handle to this transaction | 
 |  * @sb:				super block | 
 |  * @block:			start physcial block to free | 
 |  * @count:			number of blocks to free | 
 |  * @pdquot_freed_blocks:	pointer to quota | 
 |  */ | 
 | void ext3_free_blocks_sb(handle_t *handle, struct super_block *sb, | 
 | 			 ext3_fsblk_t block, unsigned long count, | 
 | 			 unsigned long *pdquot_freed_blocks) | 
 | { | 
 | 	struct buffer_head *bitmap_bh = NULL; | 
 | 	struct buffer_head *gd_bh; | 
 | 	unsigned long block_group; | 
 | 	ext3_grpblk_t bit; | 
 | 	unsigned long i; | 
 | 	unsigned long overflow; | 
 | 	struct ext3_group_desc * desc; | 
 | 	struct ext3_super_block * es; | 
 | 	struct ext3_sb_info *sbi; | 
 | 	int err = 0, ret; | 
 | 	ext3_grpblk_t group_freed; | 
 |  | 
 | 	*pdquot_freed_blocks = 0; | 
 | 	sbi = EXT3_SB(sb); | 
 | 	es = sbi->s_es; | 
 | 	if (block < le32_to_cpu(es->s_first_data_block) || | 
 | 	    block + count < block || | 
 | 	    block + count > le32_to_cpu(es->s_blocks_count)) { | 
 | 		ext3_error (sb, "ext3_free_blocks", | 
 | 			    "Freeing blocks not in datazone - " | 
 | 			    "block = "E3FSBLK", count = %lu", block, count); | 
 | 		goto error_return; | 
 | 	} | 
 |  | 
 | 	ext3_debug ("freeing block(s) %lu-%lu\n", block, block + count - 1); | 
 |  | 
 | do_more: | 
 | 	overflow = 0; | 
 | 	block_group = (block - le32_to_cpu(es->s_first_data_block)) / | 
 | 		      EXT3_BLOCKS_PER_GROUP(sb); | 
 | 	bit = (block - le32_to_cpu(es->s_first_data_block)) % | 
 | 		      EXT3_BLOCKS_PER_GROUP(sb); | 
 | 	/* | 
 | 	 * Check to see if we are freeing blocks across a group | 
 | 	 * boundary. | 
 | 	 */ | 
 | 	if (bit + count > EXT3_BLOCKS_PER_GROUP(sb)) { | 
 | 		overflow = bit + count - EXT3_BLOCKS_PER_GROUP(sb); | 
 | 		count -= overflow; | 
 | 	} | 
 | 	brelse(bitmap_bh); | 
 | 	bitmap_bh = read_block_bitmap(sb, block_group); | 
 | 	if (!bitmap_bh) | 
 | 		goto error_return; | 
 | 	desc = ext3_get_group_desc (sb, block_group, &gd_bh); | 
 | 	if (!desc) | 
 | 		goto error_return; | 
 |  | 
 | 	if (in_range (le32_to_cpu(desc->bg_block_bitmap), block, count) || | 
 | 	    in_range (le32_to_cpu(desc->bg_inode_bitmap), block, count) || | 
 | 	    in_range (block, le32_to_cpu(desc->bg_inode_table), | 
 | 		      sbi->s_itb_per_group) || | 
 | 	    in_range (block + count - 1, le32_to_cpu(desc->bg_inode_table), | 
 | 		      sbi->s_itb_per_group)) { | 
 | 		ext3_error (sb, "ext3_free_blocks", | 
 | 			    "Freeing blocks in system zones - " | 
 | 			    "Block = "E3FSBLK", count = %lu", | 
 | 			    block, count); | 
 | 		goto error_return; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * We are about to start releasing blocks in the bitmap, | 
 | 	 * so we need undo access. | 
 | 	 */ | 
 | 	/* @@@ check errors */ | 
 | 	BUFFER_TRACE(bitmap_bh, "getting undo access"); | 
 | 	err = ext3_journal_get_undo_access(handle, bitmap_bh); | 
 | 	if (err) | 
 | 		goto error_return; | 
 |  | 
 | 	/* | 
 | 	 * We are about to modify some metadata.  Call the journal APIs | 
 | 	 * to unshare ->b_data if a currently-committing transaction is | 
 | 	 * using it | 
 | 	 */ | 
 | 	BUFFER_TRACE(gd_bh, "get_write_access"); | 
 | 	err = ext3_journal_get_write_access(handle, gd_bh); | 
 | 	if (err) | 
 | 		goto error_return; | 
 |  | 
 | 	jbd_lock_bh_state(bitmap_bh); | 
 |  | 
 | 	for (i = 0, group_freed = 0; i < count; i++) { | 
 | 		/* | 
 | 		 * An HJ special.  This is expensive... | 
 | 		 */ | 
 | #ifdef CONFIG_JBD_DEBUG | 
 | 		jbd_unlock_bh_state(bitmap_bh); | 
 | 		{ | 
 | 			struct buffer_head *debug_bh; | 
 | 			debug_bh = sb_find_get_block(sb, block + i); | 
 | 			if (debug_bh) { | 
 | 				BUFFER_TRACE(debug_bh, "Deleted!"); | 
 | 				if (!bh2jh(bitmap_bh)->b_committed_data) | 
 | 					BUFFER_TRACE(debug_bh, | 
 | 						"No commited data in bitmap"); | 
 | 				BUFFER_TRACE2(debug_bh, bitmap_bh, "bitmap"); | 
 | 				__brelse(debug_bh); | 
 | 			} | 
 | 		} | 
 | 		jbd_lock_bh_state(bitmap_bh); | 
 | #endif | 
 | 		if (need_resched()) { | 
 | 			jbd_unlock_bh_state(bitmap_bh); | 
 | 			cond_resched(); | 
 | 			jbd_lock_bh_state(bitmap_bh); | 
 | 		} | 
 | 		/* @@@ This prevents newly-allocated data from being | 
 | 		 * freed and then reallocated within the same | 
 | 		 * transaction. | 
 | 		 * | 
 | 		 * Ideally we would want to allow that to happen, but to | 
 | 		 * do so requires making journal_forget() capable of | 
 | 		 * revoking the queued write of a data block, which | 
 | 		 * implies blocking on the journal lock.  *forget() | 
 | 		 * cannot block due to truncate races. | 
 | 		 * | 
 | 		 * Eventually we can fix this by making journal_forget() | 
 | 		 * return a status indicating whether or not it was able | 
 | 		 * to revoke the buffer.  On successful revoke, it is | 
 | 		 * safe not to set the allocation bit in the committed | 
 | 		 * bitmap, because we know that there is no outstanding | 
 | 		 * activity on the buffer any more and so it is safe to | 
 | 		 * reallocate it. | 
 | 		 */ | 
 | 		BUFFER_TRACE(bitmap_bh, "set in b_committed_data"); | 
 | 		J_ASSERT_BH(bitmap_bh, | 
 | 				bh2jh(bitmap_bh)->b_committed_data != NULL); | 
 | 		ext3_set_bit_atomic(sb_bgl_lock(sbi, block_group), bit + i, | 
 | 				bh2jh(bitmap_bh)->b_committed_data); | 
 |  | 
 | 		/* | 
 | 		 * We clear the bit in the bitmap after setting the committed | 
 | 		 * data bit, because this is the reverse order to that which | 
 | 		 * the allocator uses. | 
 | 		 */ | 
 | 		BUFFER_TRACE(bitmap_bh, "clear bit"); | 
 | 		if (!ext3_clear_bit_atomic(sb_bgl_lock(sbi, block_group), | 
 | 						bit + i, bitmap_bh->b_data)) { | 
 | 			jbd_unlock_bh_state(bitmap_bh); | 
 | 			ext3_error(sb, __func__, | 
 | 				"bit already cleared for block "E3FSBLK, | 
 | 				 block + i); | 
 | 			jbd_lock_bh_state(bitmap_bh); | 
 | 			BUFFER_TRACE(bitmap_bh, "bit already cleared"); | 
 | 		} else { | 
 | 			group_freed++; | 
 | 		} | 
 | 	} | 
 | 	jbd_unlock_bh_state(bitmap_bh); | 
 |  | 
 | 	spin_lock(sb_bgl_lock(sbi, block_group)); | 
 | 	le16_add_cpu(&desc->bg_free_blocks_count, group_freed); | 
 | 	spin_unlock(sb_bgl_lock(sbi, block_group)); | 
 | 	percpu_counter_add(&sbi->s_freeblocks_counter, count); | 
 |  | 
 | 	/* We dirtied the bitmap block */ | 
 | 	BUFFER_TRACE(bitmap_bh, "dirtied bitmap block"); | 
 | 	err = ext3_journal_dirty_metadata(handle, bitmap_bh); | 
 |  | 
 | 	/* And the group descriptor block */ | 
 | 	BUFFER_TRACE(gd_bh, "dirtied group descriptor block"); | 
 | 	ret = ext3_journal_dirty_metadata(handle, gd_bh); | 
 | 	if (!err) err = ret; | 
 | 	*pdquot_freed_blocks += group_freed; | 
 |  | 
 | 	if (overflow && !err) { | 
 | 		block += count; | 
 | 		count = overflow; | 
 | 		goto do_more; | 
 | 	} | 
 |  | 
 | error_return: | 
 | 	brelse(bitmap_bh); | 
 | 	ext3_std_error(sb, err); | 
 | 	return; | 
 | } | 
 |  | 
 | /** | 
 |  * ext3_free_blocks() -- Free given blocks and update quota | 
 |  * @handle:		handle for this transaction | 
 |  * @inode:		inode | 
 |  * @block:		start physical block to free | 
 |  * @count:		number of blocks to count | 
 |  */ | 
 | void ext3_free_blocks(handle_t *handle, struct inode *inode, | 
 | 			ext3_fsblk_t block, unsigned long count) | 
 | { | 
 | 	struct super_block * sb; | 
 | 	unsigned long dquot_freed_blocks; | 
 |  | 
 | 	sb = inode->i_sb; | 
 | 	if (!sb) { | 
 | 		printk ("ext3_free_blocks: nonexistent device"); | 
 | 		return; | 
 | 	} | 
 | 	ext3_free_blocks_sb(handle, sb, block, count, &dquot_freed_blocks); | 
 | 	if (dquot_freed_blocks) | 
 | 		dquot_free_block(inode, dquot_freed_blocks); | 
 | 	return; | 
 | } | 
 |  | 
 | /** | 
 |  * ext3_test_allocatable() | 
 |  * @nr:			given allocation block group | 
 |  * @bh:			bufferhead contains the bitmap of the given block group | 
 |  * | 
 |  * For ext3 allocations, we must not reuse any blocks which are | 
 |  * allocated in the bitmap buffer's "last committed data" copy.  This | 
 |  * prevents deletes from freeing up the page for reuse until we have | 
 |  * committed the delete transaction. | 
 |  * | 
 |  * If we didn't do this, then deleting something and reallocating it as | 
 |  * data would allow the old block to be overwritten before the | 
 |  * transaction committed (because we force data to disk before commit). | 
 |  * This would lead to corruption if we crashed between overwriting the | 
 |  * data and committing the delete. | 
 |  * | 
 |  * @@@ We may want to make this allocation behaviour conditional on | 
 |  * data-writes at some point, and disable it for metadata allocations or | 
 |  * sync-data inodes. | 
 |  */ | 
 | static int ext3_test_allocatable(ext3_grpblk_t nr, struct buffer_head *bh) | 
 | { | 
 | 	int ret; | 
 | 	struct journal_head *jh = bh2jh(bh); | 
 |  | 
 | 	if (ext3_test_bit(nr, bh->b_data)) | 
 | 		return 0; | 
 |  | 
 | 	jbd_lock_bh_state(bh); | 
 | 	if (!jh->b_committed_data) | 
 | 		ret = 1; | 
 | 	else | 
 | 		ret = !ext3_test_bit(nr, jh->b_committed_data); | 
 | 	jbd_unlock_bh_state(bh); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * bitmap_search_next_usable_block() | 
 |  * @start:		the starting block (group relative) of the search | 
 |  * @bh:			bufferhead contains the block group bitmap | 
 |  * @maxblocks:		the ending block (group relative) of the reservation | 
 |  * | 
 |  * The bitmap search --- search forward alternately through the actual | 
 |  * bitmap on disk and the last-committed copy in journal, until we find a | 
 |  * bit free in both bitmaps. | 
 |  */ | 
 | static ext3_grpblk_t | 
 | bitmap_search_next_usable_block(ext3_grpblk_t start, struct buffer_head *bh, | 
 | 					ext3_grpblk_t maxblocks) | 
 | { | 
 | 	ext3_grpblk_t next; | 
 | 	struct journal_head *jh = bh2jh(bh); | 
 |  | 
 | 	while (start < maxblocks) { | 
 | 		next = ext3_find_next_zero_bit(bh->b_data, maxblocks, start); | 
 | 		if (next >= maxblocks) | 
 | 			return -1; | 
 | 		if (ext3_test_allocatable(next, bh)) | 
 | 			return next; | 
 | 		jbd_lock_bh_state(bh); | 
 | 		if (jh->b_committed_data) | 
 | 			start = ext3_find_next_zero_bit(jh->b_committed_data, | 
 | 							maxblocks, next); | 
 | 		jbd_unlock_bh_state(bh); | 
 | 	} | 
 | 	return -1; | 
 | } | 
 |  | 
 | /** | 
 |  * find_next_usable_block() | 
 |  * @start:		the starting block (group relative) to find next | 
 |  *			allocatable block in bitmap. | 
 |  * @bh:			bufferhead contains the block group bitmap | 
 |  * @maxblocks:		the ending block (group relative) for the search | 
 |  * | 
 |  * Find an allocatable block in a bitmap.  We honor both the bitmap and | 
 |  * its last-committed copy (if that exists), and perform the "most | 
 |  * appropriate allocation" algorithm of looking for a free block near | 
 |  * the initial goal; then for a free byte somewhere in the bitmap; then | 
 |  * for any free bit in the bitmap. | 
 |  */ | 
 | static ext3_grpblk_t | 
 | find_next_usable_block(ext3_grpblk_t start, struct buffer_head *bh, | 
 | 			ext3_grpblk_t maxblocks) | 
 | { | 
 | 	ext3_grpblk_t here, next; | 
 | 	char *p, *r; | 
 |  | 
 | 	if (start > 0) { | 
 | 		/* | 
 | 		 * The goal was occupied; search forward for a free | 
 | 		 * block within the next XX blocks. | 
 | 		 * | 
 | 		 * end_goal is more or less random, but it has to be | 
 | 		 * less than EXT3_BLOCKS_PER_GROUP. Aligning up to the | 
 | 		 * next 64-bit boundary is simple.. | 
 | 		 */ | 
 | 		ext3_grpblk_t end_goal = (start + 63) & ~63; | 
 | 		if (end_goal > maxblocks) | 
 | 			end_goal = maxblocks; | 
 | 		here = ext3_find_next_zero_bit(bh->b_data, end_goal, start); | 
 | 		if (here < end_goal && ext3_test_allocatable(here, bh)) | 
 | 			return here; | 
 | 		ext3_debug("Bit not found near goal\n"); | 
 | 	} | 
 |  | 
 | 	here = start; | 
 | 	if (here < 0) | 
 | 		here = 0; | 
 |  | 
 | 	p = bh->b_data + (here >> 3); | 
 | 	r = memscan(p, 0, ((maxblocks + 7) >> 3) - (here >> 3)); | 
 | 	next = (r - bh->b_data) << 3; | 
 |  | 
 | 	if (next < maxblocks && next >= start && ext3_test_allocatable(next, bh)) | 
 | 		return next; | 
 |  | 
 | 	/* | 
 | 	 * The bitmap search --- search forward alternately through the actual | 
 | 	 * bitmap and the last-committed copy until we find a bit free in | 
 | 	 * both | 
 | 	 */ | 
 | 	here = bitmap_search_next_usable_block(here, bh, maxblocks); | 
 | 	return here; | 
 | } | 
 |  | 
 | /** | 
 |  * claim_block() | 
 |  * @lock:		the spin lock for this block group | 
 |  * @block:		the free block (group relative) to allocate | 
 |  * @bh:			the buffer_head contains the block group bitmap | 
 |  * | 
 |  * We think we can allocate this block in this bitmap.  Try to set the bit. | 
 |  * If that succeeds then check that nobody has allocated and then freed the | 
 |  * block since we saw that is was not marked in b_committed_data.  If it _was_ | 
 |  * allocated and freed then clear the bit in the bitmap again and return | 
 |  * zero (failure). | 
 |  */ | 
 | static inline int | 
 | claim_block(spinlock_t *lock, ext3_grpblk_t block, struct buffer_head *bh) | 
 | { | 
 | 	struct journal_head *jh = bh2jh(bh); | 
 | 	int ret; | 
 |  | 
 | 	if (ext3_set_bit_atomic(lock, block, bh->b_data)) | 
 | 		return 0; | 
 | 	jbd_lock_bh_state(bh); | 
 | 	if (jh->b_committed_data && ext3_test_bit(block,jh->b_committed_data)) { | 
 | 		ext3_clear_bit_atomic(lock, block, bh->b_data); | 
 | 		ret = 0; | 
 | 	} else { | 
 | 		ret = 1; | 
 | 	} | 
 | 	jbd_unlock_bh_state(bh); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * ext3_try_to_allocate() | 
 |  * @sb:			superblock | 
 |  * @handle:		handle to this transaction | 
 |  * @group:		given allocation block group | 
 |  * @bitmap_bh:		bufferhead holds the block bitmap | 
 |  * @grp_goal:		given target block within the group | 
 |  * @count:		target number of blocks to allocate | 
 |  * @my_rsv:		reservation window | 
 |  * | 
 |  * Attempt to allocate blocks within a give range. Set the range of allocation | 
 |  * first, then find the first free bit(s) from the bitmap (within the range), | 
 |  * and at last, allocate the blocks by claiming the found free bit as allocated. | 
 |  * | 
 |  * To set the range of this allocation: | 
 |  *	if there is a reservation window, only try to allocate block(s) from the | 
 |  *	file's own reservation window; | 
 |  *	Otherwise, the allocation range starts from the give goal block, ends at | 
 |  *	the block group's last block. | 
 |  * | 
 |  * If we failed to allocate the desired block then we may end up crossing to a | 
 |  * new bitmap.  In that case we must release write access to the old one via | 
 |  * ext3_journal_release_buffer(), else we'll run out of credits. | 
 |  */ | 
 | static ext3_grpblk_t | 
 | ext3_try_to_allocate(struct super_block *sb, handle_t *handle, int group, | 
 | 			struct buffer_head *bitmap_bh, ext3_grpblk_t grp_goal, | 
 | 			unsigned long *count, struct ext3_reserve_window *my_rsv) | 
 | { | 
 | 	ext3_fsblk_t group_first_block; | 
 | 	ext3_grpblk_t start, end; | 
 | 	unsigned long num = 0; | 
 |  | 
 | 	/* we do allocation within the reservation window if we have a window */ | 
 | 	if (my_rsv) { | 
 | 		group_first_block = ext3_group_first_block_no(sb, group); | 
 | 		if (my_rsv->_rsv_start >= group_first_block) | 
 | 			start = my_rsv->_rsv_start - group_first_block; | 
 | 		else | 
 | 			/* reservation window cross group boundary */ | 
 | 			start = 0; | 
 | 		end = my_rsv->_rsv_end - group_first_block + 1; | 
 | 		if (end > EXT3_BLOCKS_PER_GROUP(sb)) | 
 | 			/* reservation window crosses group boundary */ | 
 | 			end = EXT3_BLOCKS_PER_GROUP(sb); | 
 | 		if ((start <= grp_goal) && (grp_goal < end)) | 
 | 			start = grp_goal; | 
 | 		else | 
 | 			grp_goal = -1; | 
 | 	} else { | 
 | 		if (grp_goal > 0) | 
 | 			start = grp_goal; | 
 | 		else | 
 | 			start = 0; | 
 | 		end = EXT3_BLOCKS_PER_GROUP(sb); | 
 | 	} | 
 |  | 
 | 	BUG_ON(start > EXT3_BLOCKS_PER_GROUP(sb)); | 
 |  | 
 | repeat: | 
 | 	if (grp_goal < 0 || !ext3_test_allocatable(grp_goal, bitmap_bh)) { | 
 | 		grp_goal = find_next_usable_block(start, bitmap_bh, end); | 
 | 		if (grp_goal < 0) | 
 | 			goto fail_access; | 
 | 		if (!my_rsv) { | 
 | 			int i; | 
 |  | 
 | 			for (i = 0; i < 7 && grp_goal > start && | 
 | 					ext3_test_allocatable(grp_goal - 1, | 
 | 								bitmap_bh); | 
 | 					i++, grp_goal--) | 
 | 				; | 
 | 		} | 
 | 	} | 
 | 	start = grp_goal; | 
 |  | 
 | 	if (!claim_block(sb_bgl_lock(EXT3_SB(sb), group), | 
 | 		grp_goal, bitmap_bh)) { | 
 | 		/* | 
 | 		 * The block was allocated by another thread, or it was | 
 | 		 * allocated and then freed by another thread | 
 | 		 */ | 
 | 		start++; | 
 | 		grp_goal++; | 
 | 		if (start >= end) | 
 | 			goto fail_access; | 
 | 		goto repeat; | 
 | 	} | 
 | 	num++; | 
 | 	grp_goal++; | 
 | 	while (num < *count && grp_goal < end | 
 | 		&& ext3_test_allocatable(grp_goal, bitmap_bh) | 
 | 		&& claim_block(sb_bgl_lock(EXT3_SB(sb), group), | 
 | 				grp_goal, bitmap_bh)) { | 
 | 		num++; | 
 | 		grp_goal++; | 
 | 	} | 
 | 	*count = num; | 
 | 	return grp_goal - num; | 
 | fail_access: | 
 | 	*count = num; | 
 | 	return -1; | 
 | } | 
 |  | 
 | /** | 
 |  *	find_next_reservable_window(): | 
 |  *		find a reservable space within the given range. | 
 |  *		It does not allocate the reservation window for now: | 
 |  *		alloc_new_reservation() will do the work later. | 
 |  * | 
 |  *	@search_head: the head of the searching list; | 
 |  *		This is not necessarily the list head of the whole filesystem | 
 |  * | 
 |  *		We have both head and start_block to assist the search | 
 |  *		for the reservable space. The list starts from head, | 
 |  *		but we will shift to the place where start_block is, | 
 |  *		then start from there, when looking for a reservable space. | 
 |  * | 
 |  *	@my_rsv: the reservation window | 
 |  * | 
 |  *	@sb: the super block | 
 |  * | 
 |  *	@start_block: the first block we consider to start | 
 |  *			the real search from | 
 |  * | 
 |  *	@last_block: | 
 |  *		the maximum block number that our goal reservable space | 
 |  *		could start from. This is normally the last block in this | 
 |  *		group. The search will end when we found the start of next | 
 |  *		possible reservable space is out of this boundary. | 
 |  *		This could handle the cross boundary reservation window | 
 |  *		request. | 
 |  * | 
 |  *	basically we search from the given range, rather than the whole | 
 |  *	reservation double linked list, (start_block, last_block) | 
 |  *	to find a free region that is of my size and has not | 
 |  *	been reserved. | 
 |  * | 
 |  */ | 
 | static int find_next_reservable_window( | 
 | 				struct ext3_reserve_window_node *search_head, | 
 | 				struct ext3_reserve_window_node *my_rsv, | 
 | 				struct super_block * sb, | 
 | 				ext3_fsblk_t start_block, | 
 | 				ext3_fsblk_t last_block) | 
 | { | 
 | 	struct rb_node *next; | 
 | 	struct ext3_reserve_window_node *rsv, *prev; | 
 | 	ext3_fsblk_t cur; | 
 | 	int size = my_rsv->rsv_goal_size; | 
 |  | 
 | 	/* TODO: make the start of the reservation window byte-aligned */ | 
 | 	/* cur = *start_block & ~7;*/ | 
 | 	cur = start_block; | 
 | 	rsv = search_head; | 
 | 	if (!rsv) | 
 | 		return -1; | 
 |  | 
 | 	while (1) { | 
 | 		if (cur <= rsv->rsv_end) | 
 | 			cur = rsv->rsv_end + 1; | 
 |  | 
 | 		/* TODO? | 
 | 		 * in the case we could not find a reservable space | 
 | 		 * that is what is expected, during the re-search, we could | 
 | 		 * remember what's the largest reservable space we could have | 
 | 		 * and return that one. | 
 | 		 * | 
 | 		 * For now it will fail if we could not find the reservable | 
 | 		 * space with expected-size (or more)... | 
 | 		 */ | 
 | 		if (cur > last_block) | 
 | 			return -1;		/* fail */ | 
 |  | 
 | 		prev = rsv; | 
 | 		next = rb_next(&rsv->rsv_node); | 
 | 		rsv = rb_entry(next,struct ext3_reserve_window_node,rsv_node); | 
 |  | 
 | 		/* | 
 | 		 * Reached the last reservation, we can just append to the | 
 | 		 * previous one. | 
 | 		 */ | 
 | 		if (!next) | 
 | 			break; | 
 |  | 
 | 		if (cur + size <= rsv->rsv_start) { | 
 | 			/* | 
 | 			 * Found a reserveable space big enough.  We could | 
 | 			 * have a reservation across the group boundary here | 
 | 			 */ | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	/* | 
 | 	 * we come here either : | 
 | 	 * when we reach the end of the whole list, | 
 | 	 * and there is empty reservable space after last entry in the list. | 
 | 	 * append it to the end of the list. | 
 | 	 * | 
 | 	 * or we found one reservable space in the middle of the list, | 
 | 	 * return the reservation window that we could append to. | 
 | 	 * succeed. | 
 | 	 */ | 
 |  | 
 | 	if ((prev != my_rsv) && (!rsv_is_empty(&my_rsv->rsv_window))) | 
 | 		rsv_window_remove(sb, my_rsv); | 
 |  | 
 | 	/* | 
 | 	 * Let's book the whole avaliable window for now.  We will check the | 
 | 	 * disk bitmap later and then, if there are free blocks then we adjust | 
 | 	 * the window size if it's larger than requested. | 
 | 	 * Otherwise, we will remove this node from the tree next time | 
 | 	 * call find_next_reservable_window. | 
 | 	 */ | 
 | 	my_rsv->rsv_start = cur; | 
 | 	my_rsv->rsv_end = cur + size - 1; | 
 | 	my_rsv->rsv_alloc_hit = 0; | 
 |  | 
 | 	if (prev != my_rsv) | 
 | 		ext3_rsv_window_add(sb, my_rsv); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  *	alloc_new_reservation()--allocate a new reservation window | 
 |  * | 
 |  *		To make a new reservation, we search part of the filesystem | 
 |  *		reservation list (the list that inside the group). We try to | 
 |  *		allocate a new reservation window near the allocation goal, | 
 |  *		or the beginning of the group, if there is no goal. | 
 |  * | 
 |  *		We first find a reservable space after the goal, then from | 
 |  *		there, we check the bitmap for the first free block after | 
 |  *		it. If there is no free block until the end of group, then the | 
 |  *		whole group is full, we failed. Otherwise, check if the free | 
 |  *		block is inside the expected reservable space, if so, we | 
 |  *		succeed. | 
 |  *		If the first free block is outside the reservable space, then | 
 |  *		start from the first free block, we search for next available | 
 |  *		space, and go on. | 
 |  * | 
 |  *	on succeed, a new reservation will be found and inserted into the list | 
 |  *	It contains at least one free block, and it does not overlap with other | 
 |  *	reservation windows. | 
 |  * | 
 |  *	failed: we failed to find a reservation window in this group | 
 |  * | 
 |  *	@my_rsv: the reservation window | 
 |  * | 
 |  *	@grp_goal: The goal (group-relative).  It is where the search for a | 
 |  *		free reservable space should start from. | 
 |  *		if we have a grp_goal(grp_goal >0 ), then start from there, | 
 |  *		no grp_goal(grp_goal = -1), we start from the first block | 
 |  *		of the group. | 
 |  * | 
 |  *	@sb: the super block | 
 |  *	@group: the group we are trying to allocate in | 
 |  *	@bitmap_bh: the block group block bitmap | 
 |  * | 
 |  */ | 
 | static int alloc_new_reservation(struct ext3_reserve_window_node *my_rsv, | 
 | 		ext3_grpblk_t grp_goal, struct super_block *sb, | 
 | 		unsigned int group, struct buffer_head *bitmap_bh) | 
 | { | 
 | 	struct ext3_reserve_window_node *search_head; | 
 | 	ext3_fsblk_t group_first_block, group_end_block, start_block; | 
 | 	ext3_grpblk_t first_free_block; | 
 | 	struct rb_root *fs_rsv_root = &EXT3_SB(sb)->s_rsv_window_root; | 
 | 	unsigned long size; | 
 | 	int ret; | 
 | 	spinlock_t *rsv_lock = &EXT3_SB(sb)->s_rsv_window_lock; | 
 |  | 
 | 	group_first_block = ext3_group_first_block_no(sb, group); | 
 | 	group_end_block = group_first_block + (EXT3_BLOCKS_PER_GROUP(sb) - 1); | 
 |  | 
 | 	if (grp_goal < 0) | 
 | 		start_block = group_first_block; | 
 | 	else | 
 | 		start_block = grp_goal + group_first_block; | 
 |  | 
 | 	size = my_rsv->rsv_goal_size; | 
 |  | 
 | 	if (!rsv_is_empty(&my_rsv->rsv_window)) { | 
 | 		/* | 
 | 		 * if the old reservation is cross group boundary | 
 | 		 * and if the goal is inside the old reservation window, | 
 | 		 * we will come here when we just failed to allocate from | 
 | 		 * the first part of the window. We still have another part | 
 | 		 * that belongs to the next group. In this case, there is no | 
 | 		 * point to discard our window and try to allocate a new one | 
 | 		 * in this group(which will fail). we should | 
 | 		 * keep the reservation window, just simply move on. | 
 | 		 * | 
 | 		 * Maybe we could shift the start block of the reservation | 
 | 		 * window to the first block of next group. | 
 | 		 */ | 
 |  | 
 | 		if ((my_rsv->rsv_start <= group_end_block) && | 
 | 				(my_rsv->rsv_end > group_end_block) && | 
 | 				(start_block >= my_rsv->rsv_start)) | 
 | 			return -1; | 
 |  | 
 | 		if ((my_rsv->rsv_alloc_hit > | 
 | 		     (my_rsv->rsv_end - my_rsv->rsv_start + 1) / 2)) { | 
 | 			/* | 
 | 			 * if the previously allocation hit ratio is | 
 | 			 * greater than 1/2, then we double the size of | 
 | 			 * the reservation window the next time, | 
 | 			 * otherwise we keep the same size window | 
 | 			 */ | 
 | 			size = size * 2; | 
 | 			if (size > EXT3_MAX_RESERVE_BLOCKS) | 
 | 				size = EXT3_MAX_RESERVE_BLOCKS; | 
 | 			my_rsv->rsv_goal_size= size; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	spin_lock(rsv_lock); | 
 | 	/* | 
 | 	 * shift the search start to the window near the goal block | 
 | 	 */ | 
 | 	search_head = search_reserve_window(fs_rsv_root, start_block); | 
 |  | 
 | 	/* | 
 | 	 * find_next_reservable_window() simply finds a reservable window | 
 | 	 * inside the given range(start_block, group_end_block). | 
 | 	 * | 
 | 	 * To make sure the reservation window has a free bit inside it, we | 
 | 	 * need to check the bitmap after we found a reservable window. | 
 | 	 */ | 
 | retry: | 
 | 	ret = find_next_reservable_window(search_head, my_rsv, sb, | 
 | 						start_block, group_end_block); | 
 |  | 
 | 	if (ret == -1) { | 
 | 		if (!rsv_is_empty(&my_rsv->rsv_window)) | 
 | 			rsv_window_remove(sb, my_rsv); | 
 | 		spin_unlock(rsv_lock); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * On success, find_next_reservable_window() returns the | 
 | 	 * reservation window where there is a reservable space after it. | 
 | 	 * Before we reserve this reservable space, we need | 
 | 	 * to make sure there is at least a free block inside this region. | 
 | 	 * | 
 | 	 * searching the first free bit on the block bitmap and copy of | 
 | 	 * last committed bitmap alternatively, until we found a allocatable | 
 | 	 * block. Search start from the start block of the reservable space | 
 | 	 * we just found. | 
 | 	 */ | 
 | 	spin_unlock(rsv_lock); | 
 | 	first_free_block = bitmap_search_next_usable_block( | 
 | 			my_rsv->rsv_start - group_first_block, | 
 | 			bitmap_bh, group_end_block - group_first_block + 1); | 
 |  | 
 | 	if (first_free_block < 0) { | 
 | 		/* | 
 | 		 * no free block left on the bitmap, no point | 
 | 		 * to reserve the space. return failed. | 
 | 		 */ | 
 | 		spin_lock(rsv_lock); | 
 | 		if (!rsv_is_empty(&my_rsv->rsv_window)) | 
 | 			rsv_window_remove(sb, my_rsv); | 
 | 		spin_unlock(rsv_lock); | 
 | 		return -1;		/* failed */ | 
 | 	} | 
 |  | 
 | 	start_block = first_free_block + group_first_block; | 
 | 	/* | 
 | 	 * check if the first free block is within the | 
 | 	 * free space we just reserved | 
 | 	 */ | 
 | 	if (start_block >= my_rsv->rsv_start && start_block <= my_rsv->rsv_end) | 
 | 		return 0;		/* success */ | 
 | 	/* | 
 | 	 * if the first free bit we found is out of the reservable space | 
 | 	 * continue search for next reservable space, | 
 | 	 * start from where the free block is, | 
 | 	 * we also shift the list head to where we stopped last time | 
 | 	 */ | 
 | 	search_head = my_rsv; | 
 | 	spin_lock(rsv_lock); | 
 | 	goto retry; | 
 | } | 
 |  | 
 | /** | 
 |  * try_to_extend_reservation() | 
 |  * @my_rsv:		given reservation window | 
 |  * @sb:			super block | 
 |  * @size:		the delta to extend | 
 |  * | 
 |  * Attempt to expand the reservation window large enough to have | 
 |  * required number of free blocks | 
 |  * | 
 |  * Since ext3_try_to_allocate() will always allocate blocks within | 
 |  * the reservation window range, if the window size is too small, | 
 |  * multiple blocks allocation has to stop at the end of the reservation | 
 |  * window. To make this more efficient, given the total number of | 
 |  * blocks needed and the current size of the window, we try to | 
 |  * expand the reservation window size if necessary on a best-effort | 
 |  * basis before ext3_new_blocks() tries to allocate blocks, | 
 |  */ | 
 | static void try_to_extend_reservation(struct ext3_reserve_window_node *my_rsv, | 
 | 			struct super_block *sb, int size) | 
 | { | 
 | 	struct ext3_reserve_window_node *next_rsv; | 
 | 	struct rb_node *next; | 
 | 	spinlock_t *rsv_lock = &EXT3_SB(sb)->s_rsv_window_lock; | 
 |  | 
 | 	if (!spin_trylock(rsv_lock)) | 
 | 		return; | 
 |  | 
 | 	next = rb_next(&my_rsv->rsv_node); | 
 |  | 
 | 	if (!next) | 
 | 		my_rsv->rsv_end += size; | 
 | 	else { | 
 | 		next_rsv = rb_entry(next, struct ext3_reserve_window_node, rsv_node); | 
 |  | 
 | 		if ((next_rsv->rsv_start - my_rsv->rsv_end - 1) >= size) | 
 | 			my_rsv->rsv_end += size; | 
 | 		else | 
 | 			my_rsv->rsv_end = next_rsv->rsv_start - 1; | 
 | 	} | 
 | 	spin_unlock(rsv_lock); | 
 | } | 
 |  | 
 | /** | 
 |  * ext3_try_to_allocate_with_rsv() | 
 |  * @sb:			superblock | 
 |  * @handle:		handle to this transaction | 
 |  * @group:		given allocation block group | 
 |  * @bitmap_bh:		bufferhead holds the block bitmap | 
 |  * @grp_goal:		given target block within the group | 
 |  * @my_rsv:		reservation window | 
 |  * @count:		target number of blocks to allocate | 
 |  * @errp:		pointer to store the error code | 
 |  * | 
 |  * This is the main function used to allocate a new block and its reservation | 
 |  * window. | 
 |  * | 
 |  * Each time when a new block allocation is need, first try to allocate from | 
 |  * its own reservation.  If it does not have a reservation window, instead of | 
 |  * looking for a free bit on bitmap first, then look up the reservation list to | 
 |  * see if it is inside somebody else's reservation window, we try to allocate a | 
 |  * reservation window for it starting from the goal first. Then do the block | 
 |  * allocation within the reservation window. | 
 |  * | 
 |  * This will avoid keeping on searching the reservation list again and | 
 |  * again when somebody is looking for a free block (without | 
 |  * reservation), and there are lots of free blocks, but they are all | 
 |  * being reserved. | 
 |  * | 
 |  * We use a red-black tree for the per-filesystem reservation list. | 
 |  * | 
 |  */ | 
 | static ext3_grpblk_t | 
 | ext3_try_to_allocate_with_rsv(struct super_block *sb, handle_t *handle, | 
 | 			unsigned int group, struct buffer_head *bitmap_bh, | 
 | 			ext3_grpblk_t grp_goal, | 
 | 			struct ext3_reserve_window_node * my_rsv, | 
 | 			unsigned long *count, int *errp) | 
 | { | 
 | 	ext3_fsblk_t group_first_block, group_last_block; | 
 | 	ext3_grpblk_t ret = 0; | 
 | 	int fatal; | 
 | 	unsigned long num = *count; | 
 |  | 
 | 	*errp = 0; | 
 |  | 
 | 	/* | 
 | 	 * Make sure we use undo access for the bitmap, because it is critical | 
 | 	 * that we do the frozen_data COW on bitmap buffers in all cases even | 
 | 	 * if the buffer is in BJ_Forget state in the committing transaction. | 
 | 	 */ | 
 | 	BUFFER_TRACE(bitmap_bh, "get undo access for new block"); | 
 | 	fatal = ext3_journal_get_undo_access(handle, bitmap_bh); | 
 | 	if (fatal) { | 
 | 		*errp = fatal; | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * we don't deal with reservation when | 
 | 	 * filesystem is mounted without reservation | 
 | 	 * or the file is not a regular file | 
 | 	 * or last attempt to allocate a block with reservation turned on failed | 
 | 	 */ | 
 | 	if (my_rsv == NULL ) { | 
 | 		ret = ext3_try_to_allocate(sb, handle, group, bitmap_bh, | 
 | 						grp_goal, count, NULL); | 
 | 		goto out; | 
 | 	} | 
 | 	/* | 
 | 	 * grp_goal is a group relative block number (if there is a goal) | 
 | 	 * 0 <= grp_goal < EXT3_BLOCKS_PER_GROUP(sb) | 
 | 	 * first block is a filesystem wide block number | 
 | 	 * first block is the block number of the first block in this group | 
 | 	 */ | 
 | 	group_first_block = ext3_group_first_block_no(sb, group); | 
 | 	group_last_block = group_first_block + (EXT3_BLOCKS_PER_GROUP(sb) - 1); | 
 |  | 
 | 	/* | 
 | 	 * Basically we will allocate a new block from inode's reservation | 
 | 	 * window. | 
 | 	 * | 
 | 	 * We need to allocate a new reservation window, if: | 
 | 	 * a) inode does not have a reservation window; or | 
 | 	 * b) last attempt to allocate a block from existing reservation | 
 | 	 *    failed; or | 
 | 	 * c) we come here with a goal and with a reservation window | 
 | 	 * | 
 | 	 * We do not need to allocate a new reservation window if we come here | 
 | 	 * at the beginning with a goal and the goal is inside the window, or | 
 | 	 * we don't have a goal but already have a reservation window. | 
 | 	 * then we could go to allocate from the reservation window directly. | 
 | 	 */ | 
 | 	while (1) { | 
 | 		if (rsv_is_empty(&my_rsv->rsv_window) || (ret < 0) || | 
 | 			!goal_in_my_reservation(&my_rsv->rsv_window, | 
 | 						grp_goal, group, sb)) { | 
 | 			if (my_rsv->rsv_goal_size < *count) | 
 | 				my_rsv->rsv_goal_size = *count; | 
 | 			ret = alloc_new_reservation(my_rsv, grp_goal, sb, | 
 | 							group, bitmap_bh); | 
 | 			if (ret < 0) | 
 | 				break;			/* failed */ | 
 |  | 
 | 			if (!goal_in_my_reservation(&my_rsv->rsv_window, | 
 | 							grp_goal, group, sb)) | 
 | 				grp_goal = -1; | 
 | 		} else if (grp_goal >= 0) { | 
 | 			int curr = my_rsv->rsv_end - | 
 | 					(grp_goal + group_first_block) + 1; | 
 |  | 
 | 			if (curr < *count) | 
 | 				try_to_extend_reservation(my_rsv, sb, | 
 | 							*count - curr); | 
 | 		} | 
 |  | 
 | 		if ((my_rsv->rsv_start > group_last_block) || | 
 | 				(my_rsv->rsv_end < group_first_block)) { | 
 | 			rsv_window_dump(&EXT3_SB(sb)->s_rsv_window_root, 1); | 
 | 			BUG(); | 
 | 		} | 
 | 		ret = ext3_try_to_allocate(sb, handle, group, bitmap_bh, | 
 | 					   grp_goal, &num, &my_rsv->rsv_window); | 
 | 		if (ret >= 0) { | 
 | 			my_rsv->rsv_alloc_hit += num; | 
 | 			*count = num; | 
 | 			break;				/* succeed */ | 
 | 		} | 
 | 		num = *count; | 
 | 	} | 
 | out: | 
 | 	if (ret >= 0) { | 
 | 		BUFFER_TRACE(bitmap_bh, "journal_dirty_metadata for " | 
 | 					"bitmap block"); | 
 | 		fatal = ext3_journal_dirty_metadata(handle, bitmap_bh); | 
 | 		if (fatal) { | 
 | 			*errp = fatal; | 
 | 			return -1; | 
 | 		} | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	BUFFER_TRACE(bitmap_bh, "journal_release_buffer"); | 
 | 	ext3_journal_release_buffer(handle, bitmap_bh); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * ext3_has_free_blocks() | 
 |  * @sbi:		in-core super block structure. | 
 |  * | 
 |  * Check if filesystem has at least 1 free block available for allocation. | 
 |  */ | 
 | static int ext3_has_free_blocks(struct ext3_sb_info *sbi) | 
 | { | 
 | 	ext3_fsblk_t free_blocks, root_blocks; | 
 |  | 
 | 	free_blocks = percpu_counter_read_positive(&sbi->s_freeblocks_counter); | 
 | 	root_blocks = le32_to_cpu(sbi->s_es->s_r_blocks_count); | 
 | 	if (free_blocks < root_blocks + 1 && !capable(CAP_SYS_RESOURCE) && | 
 | 		sbi->s_resuid != current_fsuid() && | 
 | 		(sbi->s_resgid == 0 || !in_group_p (sbi->s_resgid))) { | 
 | 		return 0; | 
 | 	} | 
 | 	return 1; | 
 | } | 
 |  | 
 | /** | 
 |  * ext3_should_retry_alloc() | 
 |  * @sb:			super block | 
 |  * @retries		number of attemps has been made | 
 |  * | 
 |  * ext3_should_retry_alloc() is called when ENOSPC is returned, and if | 
 |  * it is profitable to retry the operation, this function will wait | 
 |  * for the current or commiting transaction to complete, and then | 
 |  * return TRUE. | 
 |  * | 
 |  * if the total number of retries exceed three times, return FALSE. | 
 |  */ | 
 | int ext3_should_retry_alloc(struct super_block *sb, int *retries) | 
 | { | 
 | 	if (!ext3_has_free_blocks(EXT3_SB(sb)) || (*retries)++ > 3) | 
 | 		return 0; | 
 |  | 
 | 	jbd_debug(1, "%s: retrying operation after ENOSPC\n", sb->s_id); | 
 |  | 
 | 	return journal_force_commit_nested(EXT3_SB(sb)->s_journal); | 
 | } | 
 |  | 
 | /** | 
 |  * ext3_new_blocks() -- core block(s) allocation function | 
 |  * @handle:		handle to this transaction | 
 |  * @inode:		file inode | 
 |  * @goal:		given target block(filesystem wide) | 
 |  * @count:		target number of blocks to allocate | 
 |  * @errp:		error code | 
 |  * | 
 |  * ext3_new_blocks uses a goal block to assist allocation.  It tries to | 
 |  * allocate block(s) from the block group contains the goal block first. If that | 
 |  * fails, it will try to allocate block(s) from other block groups without | 
 |  * any specific goal block. | 
 |  * | 
 |  */ | 
 | ext3_fsblk_t ext3_new_blocks(handle_t *handle, struct inode *inode, | 
 | 			ext3_fsblk_t goal, unsigned long *count, int *errp) | 
 | { | 
 | 	struct buffer_head *bitmap_bh = NULL; | 
 | 	struct buffer_head *gdp_bh; | 
 | 	int group_no; | 
 | 	int goal_group; | 
 | 	ext3_grpblk_t grp_target_blk;	/* blockgroup relative goal block */ | 
 | 	ext3_grpblk_t grp_alloc_blk;	/* blockgroup-relative allocated block*/ | 
 | 	ext3_fsblk_t ret_block;		/* filesyetem-wide allocated block */ | 
 | 	int bgi;			/* blockgroup iteration index */ | 
 | 	int fatal = 0, err; | 
 | 	int performed_allocation = 0; | 
 | 	ext3_grpblk_t free_blocks;	/* number of free blocks in a group */ | 
 | 	struct super_block *sb; | 
 | 	struct ext3_group_desc *gdp; | 
 | 	struct ext3_super_block *es; | 
 | 	struct ext3_sb_info *sbi; | 
 | 	struct ext3_reserve_window_node *my_rsv = NULL; | 
 | 	struct ext3_block_alloc_info *block_i; | 
 | 	unsigned short windowsz = 0; | 
 | #ifdef EXT3FS_DEBUG | 
 | 	static int goal_hits, goal_attempts; | 
 | #endif | 
 | 	unsigned long ngroups; | 
 | 	unsigned long num = *count; | 
 |  | 
 | 	*errp = -ENOSPC; | 
 | 	sb = inode->i_sb; | 
 | 	if (!sb) { | 
 | 		printk("ext3_new_block: nonexistent device"); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Check quota for allocation of this block. | 
 | 	 */ | 
 | 	err = dquot_alloc_block(inode, num); | 
 | 	if (err) { | 
 | 		*errp = err; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	sbi = EXT3_SB(sb); | 
 | 	es = EXT3_SB(sb)->s_es; | 
 | 	ext3_debug("goal=%lu.\n", goal); | 
 | 	/* | 
 | 	 * Allocate a block from reservation only when | 
 | 	 * filesystem is mounted with reservation(default,-o reservation), and | 
 | 	 * it's a regular file, and | 
 | 	 * the desired window size is greater than 0 (One could use ioctl | 
 | 	 * command EXT3_IOC_SETRSVSZ to set the window size to 0 to turn off | 
 | 	 * reservation on that particular file) | 
 | 	 */ | 
 | 	block_i = EXT3_I(inode)->i_block_alloc_info; | 
 | 	if (block_i && ((windowsz = block_i->rsv_window_node.rsv_goal_size) > 0)) | 
 | 		my_rsv = &block_i->rsv_window_node; | 
 |  | 
 | 	if (!ext3_has_free_blocks(sbi)) { | 
 | 		*errp = -ENOSPC; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * First, test whether the goal block is free. | 
 | 	 */ | 
 | 	if (goal < le32_to_cpu(es->s_first_data_block) || | 
 | 	    goal >= le32_to_cpu(es->s_blocks_count)) | 
 | 		goal = le32_to_cpu(es->s_first_data_block); | 
 | 	group_no = (goal - le32_to_cpu(es->s_first_data_block)) / | 
 | 			EXT3_BLOCKS_PER_GROUP(sb); | 
 | 	goal_group = group_no; | 
 | retry_alloc: | 
 | 	gdp = ext3_get_group_desc(sb, group_no, &gdp_bh); | 
 | 	if (!gdp) | 
 | 		goto io_error; | 
 |  | 
 | 	free_blocks = le16_to_cpu(gdp->bg_free_blocks_count); | 
 | 	/* | 
 | 	 * if there is not enough free blocks to make a new resevation | 
 | 	 * turn off reservation for this allocation | 
 | 	 */ | 
 | 	if (my_rsv && (free_blocks < windowsz) | 
 | 		&& (free_blocks > 0) | 
 | 		&& (rsv_is_empty(&my_rsv->rsv_window))) | 
 | 		my_rsv = NULL; | 
 |  | 
 | 	if (free_blocks > 0) { | 
 | 		grp_target_blk = ((goal - le32_to_cpu(es->s_first_data_block)) % | 
 | 				EXT3_BLOCKS_PER_GROUP(sb)); | 
 | 		bitmap_bh = read_block_bitmap(sb, group_no); | 
 | 		if (!bitmap_bh) | 
 | 			goto io_error; | 
 | 		grp_alloc_blk = ext3_try_to_allocate_with_rsv(sb, handle, | 
 | 					group_no, bitmap_bh, grp_target_blk, | 
 | 					my_rsv,	&num, &fatal); | 
 | 		if (fatal) | 
 | 			goto out; | 
 | 		if (grp_alloc_blk >= 0) | 
 | 			goto allocated; | 
 | 	} | 
 |  | 
 | 	ngroups = EXT3_SB(sb)->s_groups_count; | 
 | 	smp_rmb(); | 
 |  | 
 | 	/* | 
 | 	 * Now search the rest of the groups.  We assume that | 
 | 	 * group_no and gdp correctly point to the last group visited. | 
 | 	 */ | 
 | 	for (bgi = 0; bgi < ngroups; bgi++) { | 
 | 		group_no++; | 
 | 		if (group_no >= ngroups) | 
 | 			group_no = 0; | 
 | 		gdp = ext3_get_group_desc(sb, group_no, &gdp_bh); | 
 | 		if (!gdp) | 
 | 			goto io_error; | 
 | 		free_blocks = le16_to_cpu(gdp->bg_free_blocks_count); | 
 | 		/* | 
 | 		 * skip this group (and avoid loading bitmap) if there | 
 | 		 * are no free blocks | 
 | 		 */ | 
 | 		if (!free_blocks) | 
 | 			continue; | 
 | 		/* | 
 | 		 * skip this group if the number of | 
 | 		 * free blocks is less than half of the reservation | 
 | 		 * window size. | 
 | 		 */ | 
 | 		if (my_rsv && (free_blocks <= (windowsz/2))) | 
 | 			continue; | 
 |  | 
 | 		brelse(bitmap_bh); | 
 | 		bitmap_bh = read_block_bitmap(sb, group_no); | 
 | 		if (!bitmap_bh) | 
 | 			goto io_error; | 
 | 		/* | 
 | 		 * try to allocate block(s) from this group, without a goal(-1). | 
 | 		 */ | 
 | 		grp_alloc_blk = ext3_try_to_allocate_with_rsv(sb, handle, | 
 | 					group_no, bitmap_bh, -1, my_rsv, | 
 | 					&num, &fatal); | 
 | 		if (fatal) | 
 | 			goto out; | 
 | 		if (grp_alloc_blk >= 0) | 
 | 			goto allocated; | 
 | 	} | 
 | 	/* | 
 | 	 * We may end up a bogus ealier ENOSPC error due to | 
 | 	 * filesystem is "full" of reservations, but | 
 | 	 * there maybe indeed free blocks avaliable on disk | 
 | 	 * In this case, we just forget about the reservations | 
 | 	 * just do block allocation as without reservations. | 
 | 	 */ | 
 | 	if (my_rsv) { | 
 | 		my_rsv = NULL; | 
 | 		windowsz = 0; | 
 | 		group_no = goal_group; | 
 | 		goto retry_alloc; | 
 | 	} | 
 | 	/* No space left on the device */ | 
 | 	*errp = -ENOSPC; | 
 | 	goto out; | 
 |  | 
 | allocated: | 
 |  | 
 | 	ext3_debug("using block group %d(%d)\n", | 
 | 			group_no, gdp->bg_free_blocks_count); | 
 |  | 
 | 	BUFFER_TRACE(gdp_bh, "get_write_access"); | 
 | 	fatal = ext3_journal_get_write_access(handle, gdp_bh); | 
 | 	if (fatal) | 
 | 		goto out; | 
 |  | 
 | 	ret_block = grp_alloc_blk + ext3_group_first_block_no(sb, group_no); | 
 |  | 
 | 	if (in_range(le32_to_cpu(gdp->bg_block_bitmap), ret_block, num) || | 
 | 	    in_range(le32_to_cpu(gdp->bg_inode_bitmap), ret_block, num) || | 
 | 	    in_range(ret_block, le32_to_cpu(gdp->bg_inode_table), | 
 | 		      EXT3_SB(sb)->s_itb_per_group) || | 
 | 	    in_range(ret_block + num - 1, le32_to_cpu(gdp->bg_inode_table), | 
 | 		      EXT3_SB(sb)->s_itb_per_group)) { | 
 | 		ext3_error(sb, "ext3_new_block", | 
 | 			    "Allocating block in system zone - " | 
 | 			    "blocks from "E3FSBLK", length %lu", | 
 | 			     ret_block, num); | 
 | 		/* | 
 | 		 * claim_block() marked the blocks we allocated as in use. So we | 
 | 		 * may want to selectively mark some of the blocks as free. | 
 | 		 */ | 
 | 		goto retry_alloc; | 
 | 	} | 
 |  | 
 | 	performed_allocation = 1; | 
 |  | 
 | #ifdef CONFIG_JBD_DEBUG | 
 | 	{ | 
 | 		struct buffer_head *debug_bh; | 
 |  | 
 | 		/* Record bitmap buffer state in the newly allocated block */ | 
 | 		debug_bh = sb_find_get_block(sb, ret_block); | 
 | 		if (debug_bh) { | 
 | 			BUFFER_TRACE(debug_bh, "state when allocated"); | 
 | 			BUFFER_TRACE2(debug_bh, bitmap_bh, "bitmap state"); | 
 | 			brelse(debug_bh); | 
 | 		} | 
 | 	} | 
 | 	jbd_lock_bh_state(bitmap_bh); | 
 | 	spin_lock(sb_bgl_lock(sbi, group_no)); | 
 | 	if (buffer_jbd(bitmap_bh) && bh2jh(bitmap_bh)->b_committed_data) { | 
 | 		int i; | 
 |  | 
 | 		for (i = 0; i < num; i++) { | 
 | 			if (ext3_test_bit(grp_alloc_blk+i, | 
 | 					bh2jh(bitmap_bh)->b_committed_data)) { | 
 | 				printk("%s: block was unexpectedly set in " | 
 | 					"b_committed_data\n", __func__); | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	ext3_debug("found bit %d\n", grp_alloc_blk); | 
 | 	spin_unlock(sb_bgl_lock(sbi, group_no)); | 
 | 	jbd_unlock_bh_state(bitmap_bh); | 
 | #endif | 
 |  | 
 | 	if (ret_block + num - 1 >= le32_to_cpu(es->s_blocks_count)) { | 
 | 		ext3_error(sb, "ext3_new_block", | 
 | 			    "block("E3FSBLK") >= blocks count(%d) - " | 
 | 			    "block_group = %d, es == %p ", ret_block, | 
 | 			le32_to_cpu(es->s_blocks_count), group_no, es); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * It is up to the caller to add the new buffer to a journal | 
 | 	 * list of some description.  We don't know in advance whether | 
 | 	 * the caller wants to use it as metadata or data. | 
 | 	 */ | 
 | 	ext3_debug("allocating block %lu. Goal hits %d of %d.\n", | 
 | 			ret_block, goal_hits, goal_attempts); | 
 |  | 
 | 	spin_lock(sb_bgl_lock(sbi, group_no)); | 
 | 	le16_add_cpu(&gdp->bg_free_blocks_count, -num); | 
 | 	spin_unlock(sb_bgl_lock(sbi, group_no)); | 
 | 	percpu_counter_sub(&sbi->s_freeblocks_counter, num); | 
 |  | 
 | 	BUFFER_TRACE(gdp_bh, "journal_dirty_metadata for group descriptor"); | 
 | 	err = ext3_journal_dirty_metadata(handle, gdp_bh); | 
 | 	if (!fatal) | 
 | 		fatal = err; | 
 |  | 
 | 	if (fatal) | 
 | 		goto out; | 
 |  | 
 | 	*errp = 0; | 
 | 	brelse(bitmap_bh); | 
 | 	dquot_free_block(inode, *count-num); | 
 | 	*count = num; | 
 | 	return ret_block; | 
 |  | 
 | io_error: | 
 | 	*errp = -EIO; | 
 | out: | 
 | 	if (fatal) { | 
 | 		*errp = fatal; | 
 | 		ext3_std_error(sb, fatal); | 
 | 	} | 
 | 	/* | 
 | 	 * Undo the block allocation | 
 | 	 */ | 
 | 	if (!performed_allocation) | 
 | 		dquot_free_block(inode, *count); | 
 | 	brelse(bitmap_bh); | 
 | 	return 0; | 
 | } | 
 |  | 
 | ext3_fsblk_t ext3_new_block(handle_t *handle, struct inode *inode, | 
 | 			ext3_fsblk_t goal, int *errp) | 
 | { | 
 | 	unsigned long count = 1; | 
 |  | 
 | 	return ext3_new_blocks(handle, inode, goal, &count, errp); | 
 | } | 
 |  | 
 | /** | 
 |  * ext3_count_free_blocks() -- count filesystem free blocks | 
 |  * @sb:		superblock | 
 |  * | 
 |  * Adds up the number of free blocks from each block group. | 
 |  */ | 
 | ext3_fsblk_t ext3_count_free_blocks(struct super_block *sb) | 
 | { | 
 | 	ext3_fsblk_t desc_count; | 
 | 	struct ext3_group_desc *gdp; | 
 | 	int i; | 
 | 	unsigned long ngroups = EXT3_SB(sb)->s_groups_count; | 
 | #ifdef EXT3FS_DEBUG | 
 | 	struct ext3_super_block *es; | 
 | 	ext3_fsblk_t bitmap_count; | 
 | 	unsigned long x; | 
 | 	struct buffer_head *bitmap_bh = NULL; | 
 |  | 
 | 	es = EXT3_SB(sb)->s_es; | 
 | 	desc_count = 0; | 
 | 	bitmap_count = 0; | 
 | 	gdp = NULL; | 
 |  | 
 | 	smp_rmb(); | 
 | 	for (i = 0; i < ngroups; i++) { | 
 | 		gdp = ext3_get_group_desc(sb, i, NULL); | 
 | 		if (!gdp) | 
 | 			continue; | 
 | 		desc_count += le16_to_cpu(gdp->bg_free_blocks_count); | 
 | 		brelse(bitmap_bh); | 
 | 		bitmap_bh = read_block_bitmap(sb, i); | 
 | 		if (bitmap_bh == NULL) | 
 | 			continue; | 
 |  | 
 | 		x = ext3_count_free(bitmap_bh, sb->s_blocksize); | 
 | 		printk("group %d: stored = %d, counted = %lu\n", | 
 | 			i, le16_to_cpu(gdp->bg_free_blocks_count), x); | 
 | 		bitmap_count += x; | 
 | 	} | 
 | 	brelse(bitmap_bh); | 
 | 	printk("ext3_count_free_blocks: stored = "E3FSBLK | 
 | 		", computed = "E3FSBLK", "E3FSBLK"\n", | 
 | 	       le32_to_cpu(es->s_free_blocks_count), | 
 | 		desc_count, bitmap_count); | 
 | 	return bitmap_count; | 
 | #else | 
 | 	desc_count = 0; | 
 | 	smp_rmb(); | 
 | 	for (i = 0; i < ngroups; i++) { | 
 | 		gdp = ext3_get_group_desc(sb, i, NULL); | 
 | 		if (!gdp) | 
 | 			continue; | 
 | 		desc_count += le16_to_cpu(gdp->bg_free_blocks_count); | 
 | 	} | 
 |  | 
 | 	return desc_count; | 
 | #endif | 
 | } | 
 |  | 
 | static inline int test_root(int a, int b) | 
 | { | 
 | 	int num = b; | 
 |  | 
 | 	while (a > num) | 
 | 		num *= b; | 
 | 	return num == a; | 
 | } | 
 |  | 
 | static int ext3_group_sparse(int group) | 
 | { | 
 | 	if (group <= 1) | 
 | 		return 1; | 
 | 	if (!(group & 1)) | 
 | 		return 0; | 
 | 	return (test_root(group, 7) || test_root(group, 5) || | 
 | 		test_root(group, 3)); | 
 | } | 
 |  | 
 | /** | 
 |  *	ext3_bg_has_super - number of blocks used by the superblock in group | 
 |  *	@sb: superblock for filesystem | 
 |  *	@group: group number to check | 
 |  * | 
 |  *	Return the number of blocks used by the superblock (primary or backup) | 
 |  *	in this group.  Currently this will be only 0 or 1. | 
 |  */ | 
 | int ext3_bg_has_super(struct super_block *sb, int group) | 
 | { | 
 | 	if (EXT3_HAS_RO_COMPAT_FEATURE(sb, | 
 | 				EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER) && | 
 | 			!ext3_group_sparse(group)) | 
 | 		return 0; | 
 | 	return 1; | 
 | } | 
 |  | 
 | static unsigned long ext3_bg_num_gdb_meta(struct super_block *sb, int group) | 
 | { | 
 | 	unsigned long metagroup = group / EXT3_DESC_PER_BLOCK(sb); | 
 | 	unsigned long first = metagroup * EXT3_DESC_PER_BLOCK(sb); | 
 | 	unsigned long last = first + EXT3_DESC_PER_BLOCK(sb) - 1; | 
 |  | 
 | 	if (group == first || group == first + 1 || group == last) | 
 | 		return 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static unsigned long ext3_bg_num_gdb_nometa(struct super_block *sb, int group) | 
 | { | 
 | 	return ext3_bg_has_super(sb, group) ? EXT3_SB(sb)->s_gdb_count : 0; | 
 | } | 
 |  | 
 | /** | 
 |  *	ext3_bg_num_gdb - number of blocks used by the group table in group | 
 |  *	@sb: superblock for filesystem | 
 |  *	@group: group number to check | 
 |  * | 
 |  *	Return the number of blocks used by the group descriptor table | 
 |  *	(primary or backup) in this group.  In the future there may be a | 
 |  *	different number of descriptor blocks in each group. | 
 |  */ | 
 | unsigned long ext3_bg_num_gdb(struct super_block *sb, int group) | 
 | { | 
 | 	unsigned long first_meta_bg = | 
 | 			le32_to_cpu(EXT3_SB(sb)->s_es->s_first_meta_bg); | 
 | 	unsigned long metagroup = group / EXT3_DESC_PER_BLOCK(sb); | 
 |  | 
 | 	if (!EXT3_HAS_INCOMPAT_FEATURE(sb,EXT3_FEATURE_INCOMPAT_META_BG) || | 
 | 			metagroup < first_meta_bg) | 
 | 		return ext3_bg_num_gdb_nometa(sb,group); | 
 |  | 
 | 	return ext3_bg_num_gdb_meta(sb,group); | 
 |  | 
 | } |