[POWERPC] mpc5200: make dts files conform to generic names recommended practice
Modify mpc5200 dts files to match Open Firmware's Generic Names recommended
practice.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index 2b88a58..30737ea 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -47,17 +47,14 @@
soc5200@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
- model = "fsl,mpc5200b";
- compatible = "fsl,mpc5200b";
- revision = ""; // from bootloader
- device_type = "soc";
+ compatible = "fsl,mpc5200b-immr";
ranges = <0 f0000000 0000c000>;
reg = <f0000000 00000100>;
bus-frequency = <0>; // from bootloader
system-frequency = <0>; // from bootloader
cdm@200 {
- compatible = "mpc5200b-cdm","mpc5200-cdm";
+ compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
reg = <200 38>;
};
@@ -65,11 +62,11 @@
// 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
- compatible = "mpc5200b-pic","mpc5200-pic";
+ compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
reg = <500 80>;
};
- gpt@600 { // General Purpose Timer
+ timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <600 10>;
interrupts = <1 9 0>;
@@ -77,49 +74,49 @@
fsl,has-wdt;
};
- gpt@610 { // General Purpose Timer
+ timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <610 10>;
interrupts = <1 a 0>;
interrupt-parent = <&mpc5200_pic>;
};
- gpt@620 { // General Purpose Timer
+ timer@620 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <620 10>;
interrupts = <1 b 0>;
interrupt-parent = <&mpc5200_pic>;
};
- gpt@630 { // General Purpose Timer
+ timer@630 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <630 10>;
interrupts = <1 c 0>;
interrupt-parent = <&mpc5200_pic>;
};
- gpt@640 { // General Purpose Timer
+ timer@640 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <640 10>;
interrupts = <1 d 0>;
interrupt-parent = <&mpc5200_pic>;
};
- gpt@650 { // General Purpose Timer
+ timer@650 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <650 10>;
interrupts = <1 e 0>;
interrupt-parent = <&mpc5200_pic>;
};
- gpt@660 { // General Purpose Timer
+ timer@660 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <660 10>;
interrupts = <1 f 0>;
interrupt-parent = <&mpc5200_pic>;
};
- gpt@670 { // General Purpose Timer
+ timer@670 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <670 10>;
interrupts = <1 10 0>;
@@ -127,43 +124,42 @@
};
rtc@800 { // Real time clock
- compatible = "mpc5200b-rtc","mpc5200-rtc";
+ compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
reg = <800 100>;
interrupts = <1 5 0 1 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
gpio@b00 {
- compatible = "mpc5200b-gpio","mpc5200-gpio";
+ compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
interrupt-parent = <&mpc5200_pic>;
};
- gpio-wkup@c00 {
- compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";
+ gpio@c00 {
+ compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <&mpc5200_pic>;
};
spi@f00 {
- compatible = "mpc5200b-spi","mpc5200-spi";
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <f00 20>;
interrupts = <2 d 0 2 e 0>;
interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
- device_type = "usb-ohci-be";
- compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";
+ compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
- compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";
+ compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
reg = <1200 80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
@@ -173,13 +169,13 @@
};
xlb@1f00 {
- compatible = "mpc5200b-xlb","mpc5200-xlb";
+ compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
reg = <1f00 100>;
};
serial@2000 { // PSC1
device_type = "serial";
- compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
reg = <2000 100>;
interrupts = <2 1 0>;
@@ -188,7 +184,7 @@
serial@2200 { // PSC2
device_type = "serial";
- compatible = "mpc5200-psc-uart";
+ compatible = "fsl,mpc5200-psc-uart";
port-number = <1>; // Logical port assignment
reg = <2200 100>;
interrupts = <2 2 0>;
@@ -197,7 +193,7 @@
serial@2400 { // PSC3
device_type = "serial";
- compatible = "mpc5200-psc-uart";
+ compatible = "fsl,mpc5200-psc-uart";
port-number = <2>; // Logical port assignment
reg = <2400 100>;
interrupts = <2 3 0>;
@@ -206,7 +202,7 @@
serial@2c00 { // PSC6
device_type = "serial";
- compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
port-number = <5>; // Logical port assignment
reg = <2c00 100>;
interrupts = <2 4 0>;
@@ -215,15 +211,15 @@
ethernet@3000 {
device_type = "network";
- compatible = "mpc5200b-fec","mpc5200-fec";
+ compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <3000 800>;
- local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+ local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
};
i2c@3d40 {
- compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <&mpc5200_pic>;
@@ -231,7 +227,7 @@
};
sram@8000 {
- compatible = "mpc5200b-sram","mpc5200-sram";
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
reg = <8000 4000>;
};
};