USB: regroup all depends on USB within an if USB block
This patch removes the depends on USB from all config symbols in
drivers/usb/host/Kconfig and replace that with an if USB / endif block
as suggested by Alan Stern. Some source ... Kconfig lines have been
shuffled around to permit a better regroupment of the Kconfig files
depending on "config USB" item. No functionnal change is introduced.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 3b1a3f4..a51e7d6 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -2,11 +2,9 @@
# USB Miscellaneous driver configuration
#
comment "USB Miscellaneous drivers"
- depends on USB
config USB_EMI62
tristate "EMI 6|2m USB Audio interface support"
- depends on USB
---help---
This driver loads firmware to Emagic EMI 6|2m low latency USB
Audio and Midi interface.
@@ -21,7 +19,6 @@
config USB_EMI26
tristate "EMI 2|6 USB Audio interface support"
- depends on USB
---help---
This driver loads firmware to Emagic EMI 2|6 low latency USB
Audio interface.
@@ -34,7 +31,6 @@
config USB_ADUTUX
tristate "ADU devices from Ontrak Control Systems"
- depends on USB
help
Say Y if you want to use an ADU device from Ontrak Control
Systems.
@@ -44,7 +40,6 @@
config USB_SEVSEG
tristate "USB 7-Segment LED Display"
- depends on USB
help
Say Y here if you have a USB 7-Segment Display by Delcom
@@ -53,7 +48,6 @@
config USB_RIO500
tristate "USB Diamond Rio500 support"
- depends on USB
help
Say Y here if you want to connect a USB Rio500 mp3 player to your
computer's USB port. Please read <file:Documentation/usb/rio.txt>
@@ -64,7 +58,6 @@
config USB_LEGOTOWER
tristate "USB Lego Infrared Tower support"
- depends on USB
help
Say Y here if you want to connect a USB Lego Infrared Tower to your
computer's USB port.
@@ -77,7 +70,6 @@
config USB_LCD
tristate "USB LCD driver support"
- depends on USB
help
Say Y here if you want to connect an USBLCD to your computer's
USB port. The USBLCD is a small USB interface board for
@@ -89,7 +81,6 @@
config USB_LED
tristate "USB LED driver support"
- depends on USB
help
Say Y here if you want to connect an USBLED device to your
computer's USB port.
@@ -99,7 +90,6 @@
config USB_CYPRESS_CY7C63
tristate "Cypress CY7C63xxx USB driver support"
- depends on USB
help
Say Y here if you want to connect a Cypress CY7C63xxx
micro controller to your computer's USB port. Currently this
@@ -113,7 +103,6 @@
config USB_CYTHERM
tristate "Cypress USB thermometer driver support"
- depends on USB
help
Say Y here if you want to connect a Cypress USB thermometer
device to your computer's USB port. This device is also known
@@ -126,7 +115,6 @@
config USB_IDMOUSE
tristate "Siemens ID USB Mouse Fingerprint sensor support"
- depends on USB
help
Say Y here if you want to use the fingerprint sensor on
the Siemens ID Mouse. There is also a Siemens ID Mouse
@@ -140,7 +128,6 @@
config USB_FTDI_ELAN
tristate "Elan PCMCIA CardBus Adapter USB Client"
- depends on USB
default M
help
ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
@@ -164,7 +151,6 @@
config USB_APPLEDISPLAY
tristate "Apple Cinema Display support"
- depends on USB
select BACKLIGHT_LCD_SUPPORT
select BACKLIGHT_CLASS_DEVICE
help
@@ -175,7 +161,6 @@
config USB_LD
tristate "USB LD driver"
- depends on USB
help
This driver is for generic USB devices that use interrupt transfers,
like LD Didactic's USB devices.
@@ -185,7 +170,6 @@
config USB_TRANCEVIBRATOR
tristate "PlayStation 2 Trance Vibrator driver support"
- depends on USB
help
Say Y here if you want to connect a PlayStation 2 Trance Vibrator
device to your computer's USB port.
@@ -195,7 +179,6 @@
config USB_IOWARRIOR
tristate "IO Warrior driver support"
- depends on USB
help
Say Y here if you want to support the IO Warrior devices from Code
Mercenaries. This includes support for the following devices:
@@ -209,7 +192,6 @@
config USB_TEST
tristate "USB testing driver"
- depends on USB
help
This driver is for testing host controller software. It is used
with specialized device firmware for regression and stress testing,
@@ -220,7 +202,6 @@
config USB_ISIGHTFW
tristate "iSight firmware loading support"
- depends on USB
select FW_LOADER
help
This driver loads firmware for USB Apple iSight cameras, allowing
@@ -233,7 +214,6 @@
config USB_YUREX
tristate "USB YUREX driver support"
- depends on USB
help
Say Y here if you want to connect a YUREX to your computer's
USB port. The YUREX is a leg-shakes sensor. See
@@ -246,7 +226,6 @@
config USB_EZUSB_FX2
tristate "Functions for loading firmware on EZUSB chips"
- depends on USB
help
Say Y here if you need EZUSB device support.
(Cypress FX/FX2/FX2LP microcontrollers)
diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig
index 30ea7ca..0d03a52 100644
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -1,7 +1,7 @@
config USB_SISUSBVGA
tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
- depends on USB && (USB_MUSB_HDRC || USB_EHCI_HCD)
+ depends on (USB_MUSB_HDRC || USB_EHCI_HCD)
---help---
Say Y here if you intend to attach a USB2VGA dongle based on a
Net2280 and a SiS315 chip.