|  | /* | 
|  | * linux/fs/inode.c | 
|  | * | 
|  | * (C) 1997 Linus Torvalds | 
|  | */ | 
|  |  | 
|  | #include <linux/fs.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/dcache.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/quotaops.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/writeback.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/backing-dev.h> | 
|  | #include <linux/wait.h> | 
|  | #include <linux/hash.h> | 
|  | #include <linux/swap.h> | 
|  | #include <linux/security.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/cdev.h> | 
|  | #include <linux/bootmem.h> | 
|  | #include <linux/inotify.h> | 
|  | #include <linux/mount.h> | 
|  |  | 
|  | /* | 
|  | * This is needed for the following functions: | 
|  | *  - inode_has_buffers | 
|  | *  - invalidate_inode_buffers | 
|  | *  - invalidate_bdev | 
|  | * | 
|  | * FIXME: remove all knowledge of the buffer layer from this file | 
|  | */ | 
|  | #include <linux/buffer_head.h> | 
|  |  | 
|  | /* | 
|  | * New inode.c implementation. | 
|  | * | 
|  | * This implementation has the basic premise of trying | 
|  | * to be extremely low-overhead and SMP-safe, yet be | 
|  | * simple enough to be "obviously correct". | 
|  | * | 
|  | * Famous last words. | 
|  | */ | 
|  |  | 
|  | /* inode dynamic allocation 1999, Andrea Arcangeli <andrea@suse.de> */ | 
|  |  | 
|  | /* #define INODE_PARANOIA 1 */ | 
|  | /* #define INODE_DEBUG 1 */ | 
|  |  | 
|  | /* | 
|  | * Inode lookup is no longer as critical as it used to be: | 
|  | * most of the lookups are going to be through the dcache. | 
|  | */ | 
|  | #define I_HASHBITS	i_hash_shift | 
|  | #define I_HASHMASK	i_hash_mask | 
|  |  | 
|  | static unsigned int i_hash_mask __read_mostly; | 
|  | static unsigned int i_hash_shift __read_mostly; | 
|  |  | 
|  | /* | 
|  | * Each inode can be on two separate lists. One is | 
|  | * the hash list of the inode, used for lookups. The | 
|  | * other linked list is the "type" list: | 
|  | *  "in_use" - valid inode, i_count > 0, i_nlink > 0 | 
|  | *  "dirty"  - as "in_use" but also dirty | 
|  | *  "unused" - valid inode, i_count = 0 | 
|  | * | 
|  | * A "dirty" list is maintained for each super block, | 
|  | * allowing for low-overhead inode sync() operations. | 
|  | */ | 
|  |  | 
|  | LIST_HEAD(inode_in_use); | 
|  | LIST_HEAD(inode_unused); | 
|  | static struct hlist_head *inode_hashtable __read_mostly; | 
|  |  | 
|  | /* | 
|  | * A simple spinlock to protect the list manipulations. | 
|  | * | 
|  | * NOTE! You also have to own the lock if you change | 
|  | * the i_state of an inode while it is in use.. | 
|  | */ | 
|  | DEFINE_SPINLOCK(inode_lock); | 
|  |  | 
|  | /* | 
|  | * iprune_mutex provides exclusion between the kswapd or try_to_free_pages | 
|  | * icache shrinking path, and the umount path.  Without this exclusion, | 
|  | * by the time prune_icache calls iput for the inode whose pages it has | 
|  | * been invalidating, or by the time it calls clear_inode & destroy_inode | 
|  | * from its final dispose_list, the struct super_block they refer to | 
|  | * (for inode->i_sb->s_op) may already have been freed and reused. | 
|  | */ | 
|  | static DEFINE_MUTEX(iprune_mutex); | 
|  |  | 
|  | /* | 
|  | * Statistics gathering.. | 
|  | */ | 
|  | struct inodes_stat_t inodes_stat; | 
|  |  | 
|  | static struct kmem_cache * inode_cachep __read_mostly; | 
|  |  | 
|  | static void wake_up_inode(struct inode *inode) | 
|  | { | 
|  | /* | 
|  | * Prevent speculative execution through spin_unlock(&inode_lock); | 
|  | */ | 
|  | smp_mb(); | 
|  | wake_up_bit(&inode->i_state, __I_LOCK); | 
|  | } | 
|  |  | 
|  | static struct inode *alloc_inode(struct super_block *sb) | 
|  | { | 
|  | static const struct address_space_operations empty_aops; | 
|  | static struct inode_operations empty_iops; | 
|  | static const struct file_operations empty_fops; | 
|  | struct inode *inode; | 
|  |  | 
|  | if (sb->s_op->alloc_inode) | 
|  | inode = sb->s_op->alloc_inode(sb); | 
|  | else | 
|  | inode = (struct inode *) kmem_cache_alloc(inode_cachep, GFP_KERNEL); | 
|  |  | 
|  | if (inode) { | 
|  | struct address_space * const mapping = &inode->i_data; | 
|  |  | 
|  | inode->i_sb = sb; | 
|  | inode->i_blkbits = sb->s_blocksize_bits; | 
|  | inode->i_flags = 0; | 
|  | atomic_set(&inode->i_count, 1); | 
|  | inode->i_op = &empty_iops; | 
|  | inode->i_fop = &empty_fops; | 
|  | inode->i_nlink = 1; | 
|  | atomic_set(&inode->i_writecount, 0); | 
|  | inode->i_size = 0; | 
|  | inode->i_blocks = 0; | 
|  | inode->i_bytes = 0; | 
|  | inode->i_generation = 0; | 
|  | #ifdef CONFIG_QUOTA | 
|  | memset(&inode->i_dquot, 0, sizeof(inode->i_dquot)); | 
|  | #endif | 
|  | inode->i_pipe = NULL; | 
|  | inode->i_bdev = NULL; | 
|  | inode->i_cdev = NULL; | 
|  | inode->i_rdev = 0; | 
|  | inode->dirtied_when = 0; | 
|  | if (security_inode_alloc(inode)) { | 
|  | if (inode->i_sb->s_op->destroy_inode) | 
|  | inode->i_sb->s_op->destroy_inode(inode); | 
|  | else | 
|  | kmem_cache_free(inode_cachep, (inode)); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | spin_lock_init(&inode->i_lock); | 
|  | lockdep_set_class(&inode->i_lock, &sb->s_type->i_lock_key); | 
|  |  | 
|  | mutex_init(&inode->i_mutex); | 
|  | lockdep_set_class(&inode->i_mutex, &sb->s_type->i_mutex_key); | 
|  |  | 
|  | init_rwsem(&inode->i_alloc_sem); | 
|  | lockdep_set_class(&inode->i_alloc_sem, &sb->s_type->i_alloc_sem_key); | 
|  |  | 
|  | mapping->a_ops = &empty_aops; | 
|  | mapping->host = inode; | 
|  | mapping->flags = 0; | 
|  | mapping_set_gfp_mask(mapping, GFP_HIGHUSER_PAGECACHE); | 
|  | mapping->assoc_mapping = NULL; | 
|  | mapping->backing_dev_info = &default_backing_dev_info; | 
|  |  | 
|  | /* | 
|  | * If the block_device provides a backing_dev_info for client | 
|  | * inodes then use that.  Otherwise the inode share the bdev's | 
|  | * backing_dev_info. | 
|  | */ | 
|  | if (sb->s_bdev) { | 
|  | struct backing_dev_info *bdi; | 
|  |  | 
|  | bdi = sb->s_bdev->bd_inode_backing_dev_info; | 
|  | if (!bdi) | 
|  | bdi = sb->s_bdev->bd_inode->i_mapping->backing_dev_info; | 
|  | mapping->backing_dev_info = bdi; | 
|  | } | 
|  | inode->i_private = NULL; | 
|  | inode->i_mapping = mapping; | 
|  | } | 
|  | return inode; | 
|  | } | 
|  |  | 
|  | void destroy_inode(struct inode *inode) | 
|  | { | 
|  | BUG_ON(inode_has_buffers(inode)); | 
|  | security_inode_free(inode); | 
|  | if (inode->i_sb->s_op->destroy_inode) | 
|  | inode->i_sb->s_op->destroy_inode(inode); | 
|  | else | 
|  | kmem_cache_free(inode_cachep, (inode)); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * These are initializations that only need to be done | 
|  | * once, because the fields are idempotent across use | 
|  | * of the inode, so let the slab aware of that. | 
|  | */ | 
|  | void inode_init_once(struct inode *inode) | 
|  | { | 
|  | memset(inode, 0, sizeof(*inode)); | 
|  | INIT_HLIST_NODE(&inode->i_hash); | 
|  | INIT_LIST_HEAD(&inode->i_dentry); | 
|  | INIT_LIST_HEAD(&inode->i_devices); | 
|  | INIT_RADIX_TREE(&inode->i_data.page_tree, GFP_ATOMIC); | 
|  | rwlock_init(&inode->i_data.tree_lock); | 
|  | spin_lock_init(&inode->i_data.i_mmap_lock); | 
|  | INIT_LIST_HEAD(&inode->i_data.private_list); | 
|  | spin_lock_init(&inode->i_data.private_lock); | 
|  | INIT_RAW_PRIO_TREE_ROOT(&inode->i_data.i_mmap); | 
|  | INIT_LIST_HEAD(&inode->i_data.i_mmap_nonlinear); | 
|  | i_size_ordered_init(inode); | 
|  | #ifdef CONFIG_INOTIFY | 
|  | INIT_LIST_HEAD(&inode->inotify_watches); | 
|  | mutex_init(&inode->inotify_mutex); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(inode_init_once); | 
|  |  | 
|  | static void init_once(struct kmem_cache * cachep, void *foo) | 
|  | { | 
|  | struct inode * inode = (struct inode *) foo; | 
|  |  | 
|  | inode_init_once(inode); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * inode_lock must be held | 
|  | */ | 
|  | void __iget(struct inode * inode) | 
|  | { | 
|  | if (atomic_read(&inode->i_count)) { | 
|  | atomic_inc(&inode->i_count); | 
|  | return; | 
|  | } | 
|  | atomic_inc(&inode->i_count); | 
|  | if (!(inode->i_state & (I_DIRTY|I_SYNC))) | 
|  | list_move(&inode->i_list, &inode_in_use); | 
|  | inodes_stat.nr_unused--; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * clear_inode - clear an inode | 
|  | * @inode: inode to clear | 
|  | * | 
|  | * This is called by the filesystem to tell us | 
|  | * that the inode is no longer useful. We just | 
|  | * terminate it with extreme prejudice. | 
|  | */ | 
|  | void clear_inode(struct inode *inode) | 
|  | { | 
|  | might_sleep(); | 
|  | invalidate_inode_buffers(inode); | 
|  |  | 
|  | BUG_ON(inode->i_data.nrpages); | 
|  | BUG_ON(!(inode->i_state & I_FREEING)); | 
|  | BUG_ON(inode->i_state & I_CLEAR); | 
|  | inode_sync_wait(inode); | 
|  | DQUOT_DROP(inode); | 
|  | if (inode->i_sb->s_op->clear_inode) | 
|  | inode->i_sb->s_op->clear_inode(inode); | 
|  | if (S_ISBLK(inode->i_mode) && inode->i_bdev) | 
|  | bd_forget(inode); | 
|  | if (S_ISCHR(inode->i_mode) && inode->i_cdev) | 
|  | cd_forget(inode); | 
|  | inode->i_state = I_CLEAR; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(clear_inode); | 
|  |  | 
|  | /* | 
|  | * dispose_list - dispose of the contents of a local list | 
|  | * @head: the head of the list to free | 
|  | * | 
|  | * Dispose-list gets a local list with local inodes in it, so it doesn't | 
|  | * need to worry about list corruption and SMP locks. | 
|  | */ | 
|  | static void dispose_list(struct list_head *head) | 
|  | { | 
|  | int nr_disposed = 0; | 
|  |  | 
|  | while (!list_empty(head)) { | 
|  | struct inode *inode; | 
|  |  | 
|  | inode = list_first_entry(head, struct inode, i_list); | 
|  | list_del(&inode->i_list); | 
|  |  | 
|  | if (inode->i_data.nrpages) | 
|  | truncate_inode_pages(&inode->i_data, 0); | 
|  | clear_inode(inode); | 
|  |  | 
|  | spin_lock(&inode_lock); | 
|  | hlist_del_init(&inode->i_hash); | 
|  | list_del_init(&inode->i_sb_list); | 
|  | spin_unlock(&inode_lock); | 
|  |  | 
|  | wake_up_inode(inode); | 
|  | destroy_inode(inode); | 
|  | nr_disposed++; | 
|  | } | 
|  | spin_lock(&inode_lock); | 
|  | inodes_stat.nr_inodes -= nr_disposed; | 
|  | spin_unlock(&inode_lock); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Invalidate all inodes for a device. | 
|  | */ | 
|  | static int invalidate_list(struct list_head *head, struct list_head *dispose) | 
|  | { | 
|  | struct list_head *next; | 
|  | int busy = 0, count = 0; | 
|  |  | 
|  | next = head->next; | 
|  | for (;;) { | 
|  | struct list_head * tmp = next; | 
|  | struct inode * inode; | 
|  |  | 
|  | /* | 
|  | * We can reschedule here without worrying about the list's | 
|  | * consistency because the per-sb list of inodes must not | 
|  | * change during umount anymore, and because iprune_mutex keeps | 
|  | * shrink_icache_memory() away. | 
|  | */ | 
|  | cond_resched_lock(&inode_lock); | 
|  |  | 
|  | next = next->next; | 
|  | if (tmp == head) | 
|  | break; | 
|  | inode = list_entry(tmp, struct inode, i_sb_list); | 
|  | invalidate_inode_buffers(inode); | 
|  | if (!atomic_read(&inode->i_count)) { | 
|  | list_move(&inode->i_list, dispose); | 
|  | inode->i_state |= I_FREEING; | 
|  | count++; | 
|  | continue; | 
|  | } | 
|  | busy = 1; | 
|  | } | 
|  | /* only unused inodes may be cached with i_count zero */ | 
|  | inodes_stat.nr_unused -= count; | 
|  | return busy; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	invalidate_inodes	- discard the inodes on a device | 
|  | *	@sb: superblock | 
|  | * | 
|  | *	Discard all of the inodes for a given superblock. If the discard | 
|  | *	fails because there are busy inodes then a non zero value is returned. | 
|  | *	If the discard is successful all the inodes have been discarded. | 
|  | */ | 
|  | int invalidate_inodes(struct super_block * sb) | 
|  | { | 
|  | int busy; | 
|  | LIST_HEAD(throw_away); | 
|  |  | 
|  | mutex_lock(&iprune_mutex); | 
|  | spin_lock(&inode_lock); | 
|  | inotify_unmount_inodes(&sb->s_inodes); | 
|  | busy = invalidate_list(&sb->s_inodes, &throw_away); | 
|  | spin_unlock(&inode_lock); | 
|  |  | 
|  | dispose_list(&throw_away); | 
|  | mutex_unlock(&iprune_mutex); | 
|  |  | 
|  | return busy; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(invalidate_inodes); | 
|  |  | 
|  | static int can_unuse(struct inode *inode) | 
|  | { | 
|  | if (inode->i_state) | 
|  | return 0; | 
|  | if (inode_has_buffers(inode)) | 
|  | return 0; | 
|  | if (atomic_read(&inode->i_count)) | 
|  | return 0; | 
|  | if (inode->i_data.nrpages) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Scan `goal' inodes on the unused list for freeable ones. They are moved to | 
|  | * a temporary list and then are freed outside inode_lock by dispose_list(). | 
|  | * | 
|  | * Any inodes which are pinned purely because of attached pagecache have their | 
|  | * pagecache removed.  We expect the final iput() on that inode to add it to | 
|  | * the front of the inode_unused list.  So look for it there and if the | 
|  | * inode is still freeable, proceed.  The right inode is found 99.9% of the | 
|  | * time in testing on a 4-way. | 
|  | * | 
|  | * If the inode has metadata buffers attached to mapping->private_list then | 
|  | * try to remove them. | 
|  | */ | 
|  | static void prune_icache(int nr_to_scan) | 
|  | { | 
|  | LIST_HEAD(freeable); | 
|  | int nr_pruned = 0; | 
|  | int nr_scanned; | 
|  | unsigned long reap = 0; | 
|  |  | 
|  | mutex_lock(&iprune_mutex); | 
|  | spin_lock(&inode_lock); | 
|  | for (nr_scanned = 0; nr_scanned < nr_to_scan; nr_scanned++) { | 
|  | struct inode *inode; | 
|  |  | 
|  | if (list_empty(&inode_unused)) | 
|  | break; | 
|  |  | 
|  | inode = list_entry(inode_unused.prev, struct inode, i_list); | 
|  |  | 
|  | if (inode->i_state || atomic_read(&inode->i_count)) { | 
|  | list_move(&inode->i_list, &inode_unused); | 
|  | continue; | 
|  | } | 
|  | if (inode_has_buffers(inode) || inode->i_data.nrpages) { | 
|  | __iget(inode); | 
|  | spin_unlock(&inode_lock); | 
|  | if (remove_inode_buffers(inode)) | 
|  | reap += invalidate_mapping_pages(&inode->i_data, | 
|  | 0, -1); | 
|  | iput(inode); | 
|  | spin_lock(&inode_lock); | 
|  |  | 
|  | if (inode != list_entry(inode_unused.next, | 
|  | struct inode, i_list)) | 
|  | continue;	/* wrong inode or list_empty */ | 
|  | if (!can_unuse(inode)) | 
|  | continue; | 
|  | } | 
|  | list_move(&inode->i_list, &freeable); | 
|  | inode->i_state |= I_FREEING; | 
|  | nr_pruned++; | 
|  | } | 
|  | inodes_stat.nr_unused -= nr_pruned; | 
|  | if (current_is_kswapd()) | 
|  | __count_vm_events(KSWAPD_INODESTEAL, reap); | 
|  | else | 
|  | __count_vm_events(PGINODESTEAL, reap); | 
|  | spin_unlock(&inode_lock); | 
|  |  | 
|  | dispose_list(&freeable); | 
|  | mutex_unlock(&iprune_mutex); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * shrink_icache_memory() will attempt to reclaim some unused inodes.  Here, | 
|  | * "unused" means that no dentries are referring to the inodes: the files are | 
|  | * not open and the dcache references to those inodes have already been | 
|  | * reclaimed. | 
|  | * | 
|  | * This function is passed the number of inodes to scan, and it returns the | 
|  | * total number of remaining possibly-reclaimable inodes. | 
|  | */ | 
|  | static int shrink_icache_memory(int nr, gfp_t gfp_mask) | 
|  | { | 
|  | if (nr) { | 
|  | /* | 
|  | * Nasty deadlock avoidance.  We may hold various FS locks, | 
|  | * and we don't want to recurse into the FS that called us | 
|  | * in clear_inode() and friends.. | 
|  | */ | 
|  | if (!(gfp_mask & __GFP_FS)) | 
|  | return -1; | 
|  | prune_icache(nr); | 
|  | } | 
|  | return (inodes_stat.nr_unused / 100) * sysctl_vfs_cache_pressure; | 
|  | } | 
|  |  | 
|  | static struct shrinker icache_shrinker = { | 
|  | .shrink = shrink_icache_memory, | 
|  | .seeks = DEFAULT_SEEKS, | 
|  | }; | 
|  |  | 
|  | static void __wait_on_freeing_inode(struct inode *inode); | 
|  | /* | 
|  | * Called with the inode lock held. | 
|  | * NOTE: we are not increasing the inode-refcount, you must call __iget() | 
|  | * by hand after calling find_inode now! This simplifies iunique and won't | 
|  | * add any additional branch in the common code. | 
|  | */ | 
|  | static struct inode * find_inode(struct super_block * sb, struct hlist_head *head, int (*test)(struct inode *, void *), void *data) | 
|  | { | 
|  | struct hlist_node *node; | 
|  | struct inode * inode = NULL; | 
|  |  | 
|  | repeat: | 
|  | hlist_for_each_entry(inode, node, head, i_hash) { | 
|  | if (inode->i_sb != sb) | 
|  | continue; | 
|  | if (!test(inode, data)) | 
|  | continue; | 
|  | if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)) { | 
|  | __wait_on_freeing_inode(inode); | 
|  | goto repeat; | 
|  | } | 
|  | break; | 
|  | } | 
|  | return node ? inode : NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * find_inode_fast is the fast path version of find_inode, see the comment at | 
|  | * iget_locked for details. | 
|  | */ | 
|  | static struct inode * find_inode_fast(struct super_block * sb, struct hlist_head *head, unsigned long ino) | 
|  | { | 
|  | struct hlist_node *node; | 
|  | struct inode * inode = NULL; | 
|  |  | 
|  | repeat: | 
|  | hlist_for_each_entry(inode, node, head, i_hash) { | 
|  | if (inode->i_ino != ino) | 
|  | continue; | 
|  | if (inode->i_sb != sb) | 
|  | continue; | 
|  | if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)) { | 
|  | __wait_on_freeing_inode(inode); | 
|  | goto repeat; | 
|  | } | 
|  | break; | 
|  | } | 
|  | return node ? inode : NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	new_inode 	- obtain an inode | 
|  | *	@sb: superblock | 
|  | * | 
|  | *	Allocates a new inode for given superblock. The default gfp_mask | 
|  | *	for allocations related to inode->i_mapping is GFP_HIGHUSER_PAGECACHE. | 
|  | *	If HIGHMEM pages are unsuitable or it is known that pages allocated | 
|  | *	for the page cache are not reclaimable or migratable, | 
|  | *	mapping_set_gfp_mask() must be called with suitable flags on the | 
|  | *	newly created inode's mapping | 
|  | * | 
|  | */ | 
|  | struct inode *new_inode(struct super_block *sb) | 
|  | { | 
|  | /* | 
|  | * On a 32bit, non LFS stat() call, glibc will generate an EOVERFLOW | 
|  | * error if st_ino won't fit in target struct field. Use 32bit counter | 
|  | * here to attempt to avoid that. | 
|  | */ | 
|  | static unsigned int last_ino; | 
|  | struct inode * inode; | 
|  |  | 
|  | spin_lock_prefetch(&inode_lock); | 
|  |  | 
|  | inode = alloc_inode(sb); | 
|  | if (inode) { | 
|  | spin_lock(&inode_lock); | 
|  | inodes_stat.nr_inodes++; | 
|  | list_add(&inode->i_list, &inode_in_use); | 
|  | list_add(&inode->i_sb_list, &sb->s_inodes); | 
|  | inode->i_ino = ++last_ino; | 
|  | inode->i_state = 0; | 
|  | spin_unlock(&inode_lock); | 
|  | } | 
|  | return inode; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(new_inode); | 
|  |  | 
|  | void unlock_new_inode(struct inode *inode) | 
|  | { | 
|  | #ifdef CONFIG_DEBUG_LOCK_ALLOC | 
|  | if (inode->i_mode & S_IFDIR) { | 
|  | struct file_system_type *type = inode->i_sb->s_type; | 
|  |  | 
|  | /* | 
|  | * ensure nobody is actually holding i_mutex | 
|  | */ | 
|  | mutex_destroy(&inode->i_mutex); | 
|  | mutex_init(&inode->i_mutex); | 
|  | lockdep_set_class(&inode->i_mutex, &type->i_mutex_dir_key); | 
|  | } | 
|  | #endif | 
|  | /* | 
|  | * This is special!  We do not need the spinlock | 
|  | * when clearing I_LOCK, because we're guaranteed | 
|  | * that nobody else tries to do anything about the | 
|  | * state of the inode when it is locked, as we | 
|  | * just created it (so there can be no old holders | 
|  | * that haven't tested I_LOCK). | 
|  | */ | 
|  | inode->i_state &= ~(I_LOCK|I_NEW); | 
|  | wake_up_inode(inode); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(unlock_new_inode); | 
|  |  | 
|  | /* | 
|  | * This is called without the inode lock held.. Be careful. | 
|  | * | 
|  | * We no longer cache the sb_flags in i_flags - see fs.h | 
|  | *	-- rmk@arm.uk.linux.org | 
|  | */ | 
|  | static struct inode * get_new_inode(struct super_block *sb, struct hlist_head *head, int (*test)(struct inode *, void *), int (*set)(struct inode *, void *), void *data) | 
|  | { | 
|  | struct inode * inode; | 
|  |  | 
|  | inode = alloc_inode(sb); | 
|  | if (inode) { | 
|  | struct inode * old; | 
|  |  | 
|  | spin_lock(&inode_lock); | 
|  | /* We released the lock, so.. */ | 
|  | old = find_inode(sb, head, test, data); | 
|  | if (!old) { | 
|  | if (set(inode, data)) | 
|  | goto set_failed; | 
|  |  | 
|  | inodes_stat.nr_inodes++; | 
|  | list_add(&inode->i_list, &inode_in_use); | 
|  | list_add(&inode->i_sb_list, &sb->s_inodes); | 
|  | hlist_add_head(&inode->i_hash, head); | 
|  | inode->i_state = I_LOCK|I_NEW; | 
|  | spin_unlock(&inode_lock); | 
|  |  | 
|  | /* Return the locked inode with I_NEW set, the | 
|  | * caller is responsible for filling in the contents | 
|  | */ | 
|  | return inode; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Uhhuh, somebody else created the same inode under | 
|  | * us. Use the old inode instead of the one we just | 
|  | * allocated. | 
|  | */ | 
|  | __iget(old); | 
|  | spin_unlock(&inode_lock); | 
|  | destroy_inode(inode); | 
|  | inode = old; | 
|  | wait_on_inode(inode); | 
|  | } | 
|  | return inode; | 
|  |  | 
|  | set_failed: | 
|  | spin_unlock(&inode_lock); | 
|  | destroy_inode(inode); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * get_new_inode_fast is the fast path version of get_new_inode, see the | 
|  | * comment at iget_locked for details. | 
|  | */ | 
|  | static struct inode * get_new_inode_fast(struct super_block *sb, struct hlist_head *head, unsigned long ino) | 
|  | { | 
|  | struct inode * inode; | 
|  |  | 
|  | inode = alloc_inode(sb); | 
|  | if (inode) { | 
|  | struct inode * old; | 
|  |  | 
|  | spin_lock(&inode_lock); | 
|  | /* We released the lock, so.. */ | 
|  | old = find_inode_fast(sb, head, ino); | 
|  | if (!old) { | 
|  | inode->i_ino = ino; | 
|  | inodes_stat.nr_inodes++; | 
|  | list_add(&inode->i_list, &inode_in_use); | 
|  | list_add(&inode->i_sb_list, &sb->s_inodes); | 
|  | hlist_add_head(&inode->i_hash, head); | 
|  | inode->i_state = I_LOCK|I_NEW; | 
|  | spin_unlock(&inode_lock); | 
|  |  | 
|  | /* Return the locked inode with I_NEW set, the | 
|  | * caller is responsible for filling in the contents | 
|  | */ | 
|  | return inode; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Uhhuh, somebody else created the same inode under | 
|  | * us. Use the old inode instead of the one we just | 
|  | * allocated. | 
|  | */ | 
|  | __iget(old); | 
|  | spin_unlock(&inode_lock); | 
|  | destroy_inode(inode); | 
|  | inode = old; | 
|  | wait_on_inode(inode); | 
|  | } | 
|  | return inode; | 
|  | } | 
|  |  | 
|  | static unsigned long hash(struct super_block *sb, unsigned long hashval) | 
|  | { | 
|  | unsigned long tmp; | 
|  |  | 
|  | tmp = (hashval * (unsigned long)sb) ^ (GOLDEN_RATIO_PRIME + hashval) / | 
|  | L1_CACHE_BYTES; | 
|  | tmp = tmp ^ ((tmp ^ GOLDEN_RATIO_PRIME) >> I_HASHBITS); | 
|  | return tmp & I_HASHMASK; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	iunique - get a unique inode number | 
|  | *	@sb: superblock | 
|  | *	@max_reserved: highest reserved inode number | 
|  | * | 
|  | *	Obtain an inode number that is unique on the system for a given | 
|  | *	superblock. This is used by file systems that have no natural | 
|  | *	permanent inode numbering system. An inode number is returned that | 
|  | *	is higher than the reserved limit but unique. | 
|  | * | 
|  | *	BUGS: | 
|  | *	With a large number of inodes live on the file system this function | 
|  | *	currently becomes quite slow. | 
|  | */ | 
|  | ino_t iunique(struct super_block *sb, ino_t max_reserved) | 
|  | { | 
|  | /* | 
|  | * On a 32bit, non LFS stat() call, glibc will generate an EOVERFLOW | 
|  | * error if st_ino won't fit in target struct field. Use 32bit counter | 
|  | * here to attempt to avoid that. | 
|  | */ | 
|  | static unsigned int counter; | 
|  | struct inode *inode; | 
|  | struct hlist_head *head; | 
|  | ino_t res; | 
|  |  | 
|  | spin_lock(&inode_lock); | 
|  | do { | 
|  | if (counter <= max_reserved) | 
|  | counter = max_reserved + 1; | 
|  | res = counter++; | 
|  | head = inode_hashtable + hash(sb, res); | 
|  | inode = find_inode_fast(sb, head, res); | 
|  | } while (inode != NULL); | 
|  | spin_unlock(&inode_lock); | 
|  |  | 
|  | return res; | 
|  | } | 
|  | EXPORT_SYMBOL(iunique); | 
|  |  | 
|  | struct inode *igrab(struct inode *inode) | 
|  | { | 
|  | spin_lock(&inode_lock); | 
|  | if (!(inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE))) | 
|  | __iget(inode); | 
|  | else | 
|  | /* | 
|  | * Handle the case where s_op->clear_inode is not been | 
|  | * called yet, and somebody is calling igrab | 
|  | * while the inode is getting freed. | 
|  | */ | 
|  | inode = NULL; | 
|  | spin_unlock(&inode_lock); | 
|  | return inode; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(igrab); | 
|  |  | 
|  | /** | 
|  | * ifind - internal function, you want ilookup5() or iget5(). | 
|  | * @sb:		super block of file system to search | 
|  | * @head:       the head of the list to search | 
|  | * @test:	callback used for comparisons between inodes | 
|  | * @data:	opaque data pointer to pass to @test | 
|  | * @wait:	if true wait for the inode to be unlocked, if false do not | 
|  | * | 
|  | * ifind() searches for the inode specified by @data in the inode | 
|  | * cache. This is a generalized version of ifind_fast() for file systems where | 
|  | * the inode number is not sufficient for unique identification of an inode. | 
|  | * | 
|  | * If the inode is in the cache, the inode is returned with an incremented | 
|  | * reference count. | 
|  | * | 
|  | * Otherwise NULL is returned. | 
|  | * | 
|  | * Note, @test is called with the inode_lock held, so can't sleep. | 
|  | */ | 
|  | static struct inode *ifind(struct super_block *sb, | 
|  | struct hlist_head *head, int (*test)(struct inode *, void *), | 
|  | void *data, const int wait) | 
|  | { | 
|  | struct inode *inode; | 
|  |  | 
|  | spin_lock(&inode_lock); | 
|  | inode = find_inode(sb, head, test, data); | 
|  | if (inode) { | 
|  | __iget(inode); | 
|  | spin_unlock(&inode_lock); | 
|  | if (likely(wait)) | 
|  | wait_on_inode(inode); | 
|  | return inode; | 
|  | } | 
|  | spin_unlock(&inode_lock); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ifind_fast - internal function, you want ilookup() or iget(). | 
|  | * @sb:		super block of file system to search | 
|  | * @head:       head of the list to search | 
|  | * @ino:	inode number to search for | 
|  | * | 
|  | * ifind_fast() searches for the inode @ino in the inode cache. This is for | 
|  | * file systems where the inode number is sufficient for unique identification | 
|  | * of an inode. | 
|  | * | 
|  | * If the inode is in the cache, the inode is returned with an incremented | 
|  | * reference count. | 
|  | * | 
|  | * Otherwise NULL is returned. | 
|  | */ | 
|  | static struct inode *ifind_fast(struct super_block *sb, | 
|  | struct hlist_head *head, unsigned long ino) | 
|  | { | 
|  | struct inode *inode; | 
|  |  | 
|  | spin_lock(&inode_lock); | 
|  | inode = find_inode_fast(sb, head, ino); | 
|  | if (inode) { | 
|  | __iget(inode); | 
|  | spin_unlock(&inode_lock); | 
|  | wait_on_inode(inode); | 
|  | return inode; | 
|  | } | 
|  | spin_unlock(&inode_lock); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ilookup5_nowait - search for an inode in the inode cache | 
|  | * @sb:		super block of file system to search | 
|  | * @hashval:	hash value (usually inode number) to search for | 
|  | * @test:	callback used for comparisons between inodes | 
|  | * @data:	opaque data pointer to pass to @test | 
|  | * | 
|  | * ilookup5() uses ifind() to search for the inode specified by @hashval and | 
|  | * @data in the inode cache. This is a generalized version of ilookup() for | 
|  | * file systems where the inode number is not sufficient for unique | 
|  | * identification of an inode. | 
|  | * | 
|  | * If the inode is in the cache, the inode is returned with an incremented | 
|  | * reference count.  Note, the inode lock is not waited upon so you have to be | 
|  | * very careful what you do with the returned inode.  You probably should be | 
|  | * using ilookup5() instead. | 
|  | * | 
|  | * Otherwise NULL is returned. | 
|  | * | 
|  | * Note, @test is called with the inode_lock held, so can't sleep. | 
|  | */ | 
|  | struct inode *ilookup5_nowait(struct super_block *sb, unsigned long hashval, | 
|  | int (*test)(struct inode *, void *), void *data) | 
|  | { | 
|  | struct hlist_head *head = inode_hashtable + hash(sb, hashval); | 
|  |  | 
|  | return ifind(sb, head, test, data, 0); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(ilookup5_nowait); | 
|  |  | 
|  | /** | 
|  | * ilookup5 - search for an inode in the inode cache | 
|  | * @sb:		super block of file system to search | 
|  | * @hashval:	hash value (usually inode number) to search for | 
|  | * @test:	callback used for comparisons between inodes | 
|  | * @data:	opaque data pointer to pass to @test | 
|  | * | 
|  | * ilookup5() uses ifind() to search for the inode specified by @hashval and | 
|  | * @data in the inode cache. This is a generalized version of ilookup() for | 
|  | * file systems where the inode number is not sufficient for unique | 
|  | * identification of an inode. | 
|  | * | 
|  | * If the inode is in the cache, the inode lock is waited upon and the inode is | 
|  | * returned with an incremented reference count. | 
|  | * | 
|  | * Otherwise NULL is returned. | 
|  | * | 
|  | * Note, @test is called with the inode_lock held, so can't sleep. | 
|  | */ | 
|  | struct inode *ilookup5(struct super_block *sb, unsigned long hashval, | 
|  | int (*test)(struct inode *, void *), void *data) | 
|  | { | 
|  | struct hlist_head *head = inode_hashtable + hash(sb, hashval); | 
|  |  | 
|  | return ifind(sb, head, test, data, 1); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(ilookup5); | 
|  |  | 
|  | /** | 
|  | * ilookup - search for an inode in the inode cache | 
|  | * @sb:		super block of file system to search | 
|  | * @ino:	inode number to search for | 
|  | * | 
|  | * ilookup() uses ifind_fast() to search for the inode @ino in the inode cache. | 
|  | * This is for file systems where the inode number is sufficient for unique | 
|  | * identification of an inode. | 
|  | * | 
|  | * If the inode is in the cache, the inode is returned with an incremented | 
|  | * reference count. | 
|  | * | 
|  | * Otherwise NULL is returned. | 
|  | */ | 
|  | struct inode *ilookup(struct super_block *sb, unsigned long ino) | 
|  | { | 
|  | struct hlist_head *head = inode_hashtable + hash(sb, ino); | 
|  |  | 
|  | return ifind_fast(sb, head, ino); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(ilookup); | 
|  |  | 
|  | /** | 
|  | * iget5_locked - obtain an inode from a mounted file system | 
|  | * @sb:		super block of file system | 
|  | * @hashval:	hash value (usually inode number) to get | 
|  | * @test:	callback used for comparisons between inodes | 
|  | * @set:	callback used to initialize a new struct inode | 
|  | * @data:	opaque data pointer to pass to @test and @set | 
|  | * | 
|  | * iget5_locked() uses ifind() to search for the inode specified by @hashval | 
|  | * and @data in the inode cache and if present it is returned with an increased | 
|  | * reference count. This is a generalized version of iget_locked() for file | 
|  | * systems where the inode number is not sufficient for unique identification | 
|  | * of an inode. | 
|  | * | 
|  | * If the inode is not in cache, get_new_inode() is called to allocate a new | 
|  | * inode and this is returned locked, hashed, and with the I_NEW flag set. The | 
|  | * file system gets to fill it in before unlocking it via unlock_new_inode(). | 
|  | * | 
|  | * Note both @test and @set are called with the inode_lock held, so can't sleep. | 
|  | */ | 
|  | struct inode *iget5_locked(struct super_block *sb, unsigned long hashval, | 
|  | int (*test)(struct inode *, void *), | 
|  | int (*set)(struct inode *, void *), void *data) | 
|  | { | 
|  | struct hlist_head *head = inode_hashtable + hash(sb, hashval); | 
|  | struct inode *inode; | 
|  |  | 
|  | inode = ifind(sb, head, test, data, 1); | 
|  | if (inode) | 
|  | return inode; | 
|  | /* | 
|  | * get_new_inode() will do the right thing, re-trying the search | 
|  | * in case it had to block at any point. | 
|  | */ | 
|  | return get_new_inode(sb, head, test, set, data); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(iget5_locked); | 
|  |  | 
|  | /** | 
|  | * iget_locked - obtain an inode from a mounted file system | 
|  | * @sb:		super block of file system | 
|  | * @ino:	inode number to get | 
|  | * | 
|  | * iget_locked() uses ifind_fast() to search for the inode specified by @ino in | 
|  | * the inode cache and if present it is returned with an increased reference | 
|  | * count. This is for file systems where the inode number is sufficient for | 
|  | * unique identification of an inode. | 
|  | * | 
|  | * If the inode is not in cache, get_new_inode_fast() is called to allocate a | 
|  | * new inode and this is returned locked, hashed, and with the I_NEW flag set. | 
|  | * The file system gets to fill it in before unlocking it via | 
|  | * unlock_new_inode(). | 
|  | */ | 
|  | struct inode *iget_locked(struct super_block *sb, unsigned long ino) | 
|  | { | 
|  | struct hlist_head *head = inode_hashtable + hash(sb, ino); | 
|  | struct inode *inode; | 
|  |  | 
|  | inode = ifind_fast(sb, head, ino); | 
|  | if (inode) | 
|  | return inode; | 
|  | /* | 
|  | * get_new_inode_fast() will do the right thing, re-trying the search | 
|  | * in case it had to block at any point. | 
|  | */ | 
|  | return get_new_inode_fast(sb, head, ino); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(iget_locked); | 
|  |  | 
|  | /** | 
|  | *	__insert_inode_hash - hash an inode | 
|  | *	@inode: unhashed inode | 
|  | *	@hashval: unsigned long value used to locate this object in the | 
|  | *		inode_hashtable. | 
|  | * | 
|  | *	Add an inode to the inode hash for this superblock. | 
|  | */ | 
|  | void __insert_inode_hash(struct inode *inode, unsigned long hashval) | 
|  | { | 
|  | struct hlist_head *head = inode_hashtable + hash(inode->i_sb, hashval); | 
|  | spin_lock(&inode_lock); | 
|  | hlist_add_head(&inode->i_hash, head); | 
|  | spin_unlock(&inode_lock); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(__insert_inode_hash); | 
|  |  | 
|  | /** | 
|  | *	remove_inode_hash - remove an inode from the hash | 
|  | *	@inode: inode to unhash | 
|  | * | 
|  | *	Remove an inode from the superblock. | 
|  | */ | 
|  | void remove_inode_hash(struct inode *inode) | 
|  | { | 
|  | spin_lock(&inode_lock); | 
|  | hlist_del_init(&inode->i_hash); | 
|  | spin_unlock(&inode_lock); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(remove_inode_hash); | 
|  |  | 
|  | /* | 
|  | * Tell the filesystem that this inode is no longer of any interest and should | 
|  | * be completely destroyed. | 
|  | * | 
|  | * We leave the inode in the inode hash table until *after* the filesystem's | 
|  | * ->delete_inode completes.  This ensures that an iget (such as nfsd might | 
|  | * instigate) will always find up-to-date information either in the hash or on | 
|  | * disk. | 
|  | * | 
|  | * I_FREEING is set so that no-one will take a new reference to the inode while | 
|  | * it is being deleted. | 
|  | */ | 
|  | void generic_delete_inode(struct inode *inode) | 
|  | { | 
|  | const struct super_operations *op = inode->i_sb->s_op; | 
|  |  | 
|  | list_del_init(&inode->i_list); | 
|  | list_del_init(&inode->i_sb_list); | 
|  | inode->i_state |= I_FREEING; | 
|  | inodes_stat.nr_inodes--; | 
|  | spin_unlock(&inode_lock); | 
|  |  | 
|  | security_inode_delete(inode); | 
|  |  | 
|  | if (op->delete_inode) { | 
|  | void (*delete)(struct inode *) = op->delete_inode; | 
|  | if (!is_bad_inode(inode)) | 
|  | DQUOT_INIT(inode); | 
|  | /* Filesystems implementing their own | 
|  | * s_op->delete_inode are required to call | 
|  | * truncate_inode_pages and clear_inode() | 
|  | * internally */ | 
|  | delete(inode); | 
|  | } else { | 
|  | truncate_inode_pages(&inode->i_data, 0); | 
|  | clear_inode(inode); | 
|  | } | 
|  | spin_lock(&inode_lock); | 
|  | hlist_del_init(&inode->i_hash); | 
|  | spin_unlock(&inode_lock); | 
|  | wake_up_inode(inode); | 
|  | BUG_ON(inode->i_state != I_CLEAR); | 
|  | destroy_inode(inode); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(generic_delete_inode); | 
|  |  | 
|  | static void generic_forget_inode(struct inode *inode) | 
|  | { | 
|  | struct super_block *sb = inode->i_sb; | 
|  |  | 
|  | if (!hlist_unhashed(&inode->i_hash)) { | 
|  | if (!(inode->i_state & (I_DIRTY|I_SYNC))) | 
|  | list_move(&inode->i_list, &inode_unused); | 
|  | inodes_stat.nr_unused++; | 
|  | if (sb->s_flags & MS_ACTIVE) { | 
|  | spin_unlock(&inode_lock); | 
|  | return; | 
|  | } | 
|  | inode->i_state |= I_WILL_FREE; | 
|  | spin_unlock(&inode_lock); | 
|  | write_inode_now(inode, 1); | 
|  | spin_lock(&inode_lock); | 
|  | inode->i_state &= ~I_WILL_FREE; | 
|  | inodes_stat.nr_unused--; | 
|  | hlist_del_init(&inode->i_hash); | 
|  | } | 
|  | list_del_init(&inode->i_list); | 
|  | list_del_init(&inode->i_sb_list); | 
|  | inode->i_state |= I_FREEING; | 
|  | inodes_stat.nr_inodes--; | 
|  | spin_unlock(&inode_lock); | 
|  | if (inode->i_data.nrpages) | 
|  | truncate_inode_pages(&inode->i_data, 0); | 
|  | clear_inode(inode); | 
|  | wake_up_inode(inode); | 
|  | destroy_inode(inode); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Normal UNIX filesystem behaviour: delete the | 
|  | * inode when the usage count drops to zero, and | 
|  | * i_nlink is zero. | 
|  | */ | 
|  | void generic_drop_inode(struct inode *inode) | 
|  | { | 
|  | if (!inode->i_nlink) | 
|  | generic_delete_inode(inode); | 
|  | else | 
|  | generic_forget_inode(inode); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL_GPL(generic_drop_inode); | 
|  |  | 
|  | /* | 
|  | * Called when we're dropping the last reference | 
|  | * to an inode. | 
|  | * | 
|  | * Call the FS "drop()" function, defaulting to | 
|  | * the legacy UNIX filesystem behaviour.. | 
|  | * | 
|  | * NOTE! NOTE! NOTE! We're called with the inode lock | 
|  | * held, and the drop function is supposed to release | 
|  | * the lock! | 
|  | */ | 
|  | static inline void iput_final(struct inode *inode) | 
|  | { | 
|  | const struct super_operations *op = inode->i_sb->s_op; | 
|  | void (*drop)(struct inode *) = generic_drop_inode; | 
|  |  | 
|  | if (op && op->drop_inode) | 
|  | drop = op->drop_inode; | 
|  | drop(inode); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	iput	- put an inode | 
|  | *	@inode: inode to put | 
|  | * | 
|  | *	Puts an inode, dropping its usage count. If the inode use count hits | 
|  | *	zero, the inode is then freed and may also be destroyed. | 
|  | * | 
|  | *	Consequently, iput() can sleep. | 
|  | */ | 
|  | void iput(struct inode *inode) | 
|  | { | 
|  | if (inode) { | 
|  | BUG_ON(inode->i_state == I_CLEAR); | 
|  |  | 
|  | if (atomic_dec_and_lock(&inode->i_count, &inode_lock)) | 
|  | iput_final(inode); | 
|  | } | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(iput); | 
|  |  | 
|  | /** | 
|  | *	bmap	- find a block number in a file | 
|  | *	@inode: inode of file | 
|  | *	@block: block to find | 
|  | * | 
|  | *	Returns the block number on the device holding the inode that | 
|  | *	is the disk block number for the block of the file requested. | 
|  | *	That is, asked for block 4 of inode 1 the function will return the | 
|  | *	disk block relative to the disk start that holds that block of the | 
|  | *	file. | 
|  | */ | 
|  | sector_t bmap(struct inode * inode, sector_t block) | 
|  | { | 
|  | sector_t res = 0; | 
|  | if (inode->i_mapping->a_ops->bmap) | 
|  | res = inode->i_mapping->a_ops->bmap(inode->i_mapping, block); | 
|  | return res; | 
|  | } | 
|  | EXPORT_SYMBOL(bmap); | 
|  |  | 
|  | /** | 
|  | *	touch_atime	-	update the access time | 
|  | *	@mnt: mount the inode is accessed on | 
|  | *	@dentry: dentry accessed | 
|  | * | 
|  | *	Update the accessed time on an inode and mark it for writeback. | 
|  | *	This function automatically handles read only file systems and media, | 
|  | *	as well as the "noatime" flag and inode specific "noatime" markers. | 
|  | */ | 
|  | void touch_atime(struct vfsmount *mnt, struct dentry *dentry) | 
|  | { | 
|  | struct inode *inode = dentry->d_inode; | 
|  | struct timespec now; | 
|  |  | 
|  | if (mnt_want_write(mnt)) | 
|  | return; | 
|  | if (inode->i_flags & S_NOATIME) | 
|  | goto out; | 
|  | if (IS_NOATIME(inode)) | 
|  | goto out; | 
|  | if ((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode)) | 
|  | goto out; | 
|  |  | 
|  | if (mnt->mnt_flags & MNT_NOATIME) | 
|  | goto out; | 
|  | if ((mnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode)) | 
|  | goto out; | 
|  | if (mnt->mnt_flags & MNT_RELATIME) { | 
|  | /* | 
|  | * With relative atime, only update atime if the previous | 
|  | * atime is earlier than either the ctime or mtime. | 
|  | */ | 
|  | if (timespec_compare(&inode->i_mtime, &inode->i_atime) < 0 && | 
|  | timespec_compare(&inode->i_ctime, &inode->i_atime) < 0) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | now = current_fs_time(inode->i_sb); | 
|  | if (timespec_equal(&inode->i_atime, &now)) | 
|  | goto out; | 
|  |  | 
|  | inode->i_atime = now; | 
|  | mark_inode_dirty_sync(inode); | 
|  | out: | 
|  | mnt_drop_write(mnt); | 
|  | } | 
|  | EXPORT_SYMBOL(touch_atime); | 
|  |  | 
|  | /** | 
|  | *	file_update_time	-	update mtime and ctime time | 
|  | *	@file: file accessed | 
|  | * | 
|  | *	Update the mtime and ctime members of an inode and mark the inode | 
|  | *	for writeback.  Note that this function is meant exclusively for | 
|  | *	usage in the file write path of filesystems, and filesystems may | 
|  | *	choose to explicitly ignore update via this function with the | 
|  | *	S_NOCTIME inode flag, e.g. for network filesystem where these | 
|  | *	timestamps are handled by the server. | 
|  | */ | 
|  |  | 
|  | void file_update_time(struct file *file) | 
|  | { | 
|  | struct inode *inode = file->f_path.dentry->d_inode; | 
|  | struct timespec now; | 
|  | int sync_it = 0; | 
|  | int err; | 
|  |  | 
|  | if (IS_NOCMTIME(inode)) | 
|  | return; | 
|  |  | 
|  | err = mnt_want_write(file->f_path.mnt); | 
|  | if (err) | 
|  | return; | 
|  |  | 
|  | now = current_fs_time(inode->i_sb); | 
|  | if (!timespec_equal(&inode->i_mtime, &now)) { | 
|  | inode->i_mtime = now; | 
|  | sync_it = 1; | 
|  | } | 
|  |  | 
|  | if (!timespec_equal(&inode->i_ctime, &now)) { | 
|  | inode->i_ctime = now; | 
|  | sync_it = 1; | 
|  | } | 
|  |  | 
|  | if (IS_I_VERSION(inode)) { | 
|  | inode_inc_iversion(inode); | 
|  | sync_it = 1; | 
|  | } | 
|  |  | 
|  | if (sync_it) | 
|  | mark_inode_dirty_sync(inode); | 
|  | mnt_drop_write(file->f_path.mnt); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(file_update_time); | 
|  |  | 
|  | int inode_needs_sync(struct inode *inode) | 
|  | { | 
|  | if (IS_SYNC(inode)) | 
|  | return 1; | 
|  | if (S_ISDIR(inode->i_mode) && IS_DIRSYNC(inode)) | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(inode_needs_sync); | 
|  |  | 
|  | int inode_wait(void *word) | 
|  | { | 
|  | schedule(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we try to find an inode in the inode hash while it is being | 
|  | * deleted, we have to wait until the filesystem completes its | 
|  | * deletion before reporting that it isn't found.  This function waits | 
|  | * until the deletion _might_ have completed.  Callers are responsible | 
|  | * to recheck inode state. | 
|  | * | 
|  | * It doesn't matter if I_LOCK is not set initially, a call to | 
|  | * wake_up_inode() after removing from the hash list will DTRT. | 
|  | * | 
|  | * This is called with inode_lock held. | 
|  | */ | 
|  | static void __wait_on_freeing_inode(struct inode *inode) | 
|  | { | 
|  | wait_queue_head_t *wq; | 
|  | DEFINE_WAIT_BIT(wait, &inode->i_state, __I_LOCK); | 
|  | wq = bit_waitqueue(&inode->i_state, __I_LOCK); | 
|  | prepare_to_wait(wq, &wait.wait, TASK_UNINTERRUPTIBLE); | 
|  | spin_unlock(&inode_lock); | 
|  | schedule(); | 
|  | finish_wait(wq, &wait.wait); | 
|  | spin_lock(&inode_lock); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We rarely want to lock two inodes that do not have a parent/child | 
|  | * relationship (such as directory, child inode) simultaneously. The | 
|  | * vast majority of file systems should be able to get along fine | 
|  | * without this. Do not use these functions except as a last resort. | 
|  | */ | 
|  | void inode_double_lock(struct inode *inode1, struct inode *inode2) | 
|  | { | 
|  | if (inode1 == NULL || inode2 == NULL || inode1 == inode2) { | 
|  | if (inode1) | 
|  | mutex_lock(&inode1->i_mutex); | 
|  | else if (inode2) | 
|  | mutex_lock(&inode2->i_mutex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (inode1 < inode2) { | 
|  | mutex_lock_nested(&inode1->i_mutex, I_MUTEX_PARENT); | 
|  | mutex_lock_nested(&inode2->i_mutex, I_MUTEX_CHILD); | 
|  | } else { | 
|  | mutex_lock_nested(&inode2->i_mutex, I_MUTEX_PARENT); | 
|  | mutex_lock_nested(&inode1->i_mutex, I_MUTEX_CHILD); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(inode_double_lock); | 
|  |  | 
|  | void inode_double_unlock(struct inode *inode1, struct inode *inode2) | 
|  | { | 
|  | if (inode1) | 
|  | mutex_unlock(&inode1->i_mutex); | 
|  |  | 
|  | if (inode2 && inode2 != inode1) | 
|  | mutex_unlock(&inode2->i_mutex); | 
|  | } | 
|  | EXPORT_SYMBOL(inode_double_unlock); | 
|  |  | 
|  | static __initdata unsigned long ihash_entries; | 
|  | static int __init set_ihash_entries(char *str) | 
|  | { | 
|  | if (!str) | 
|  | return 0; | 
|  | ihash_entries = simple_strtoul(str, &str, 0); | 
|  | return 1; | 
|  | } | 
|  | __setup("ihash_entries=", set_ihash_entries); | 
|  |  | 
|  | /* | 
|  | * Initialize the waitqueues and inode hash table. | 
|  | */ | 
|  | void __init inode_init_early(void) | 
|  | { | 
|  | int loop; | 
|  |  | 
|  | /* If hashes are distributed across NUMA nodes, defer | 
|  | * hash allocation until vmalloc space is available. | 
|  | */ | 
|  | if (hashdist) | 
|  | return; | 
|  |  | 
|  | inode_hashtable = | 
|  | alloc_large_system_hash("Inode-cache", | 
|  | sizeof(struct hlist_head), | 
|  | ihash_entries, | 
|  | 14, | 
|  | HASH_EARLY, | 
|  | &i_hash_shift, | 
|  | &i_hash_mask, | 
|  | 0); | 
|  |  | 
|  | for (loop = 0; loop < (1 << i_hash_shift); loop++) | 
|  | INIT_HLIST_HEAD(&inode_hashtable[loop]); | 
|  | } | 
|  |  | 
|  | void __init inode_init(void) | 
|  | { | 
|  | int loop; | 
|  |  | 
|  | /* inode slab cache */ | 
|  | inode_cachep = kmem_cache_create("inode_cache", | 
|  | sizeof(struct inode), | 
|  | 0, | 
|  | (SLAB_RECLAIM_ACCOUNT|SLAB_PANIC| | 
|  | SLAB_MEM_SPREAD), | 
|  | init_once); | 
|  | register_shrinker(&icache_shrinker); | 
|  |  | 
|  | /* Hash may have been set up in inode_init_early */ | 
|  | if (!hashdist) | 
|  | return; | 
|  |  | 
|  | inode_hashtable = | 
|  | alloc_large_system_hash("Inode-cache", | 
|  | sizeof(struct hlist_head), | 
|  | ihash_entries, | 
|  | 14, | 
|  | 0, | 
|  | &i_hash_shift, | 
|  | &i_hash_mask, | 
|  | 0); | 
|  |  | 
|  | for (loop = 0; loop < (1 << i_hash_shift); loop++) | 
|  | INIT_HLIST_HEAD(&inode_hashtable[loop]); | 
|  | } | 
|  |  | 
|  | void init_special_inode(struct inode *inode, umode_t mode, dev_t rdev) | 
|  | { | 
|  | inode->i_mode = mode; | 
|  | if (S_ISCHR(mode)) { | 
|  | inode->i_fop = &def_chr_fops; | 
|  | inode->i_rdev = rdev; | 
|  | } else if (S_ISBLK(mode)) { | 
|  | inode->i_fop = &def_blk_fops; | 
|  | inode->i_rdev = rdev; | 
|  | } else if (S_ISFIFO(mode)) | 
|  | inode->i_fop = &def_fifo_fops; | 
|  | else if (S_ISSOCK(mode)) | 
|  | inode->i_fop = &bad_sock_fops; | 
|  | else | 
|  | printk(KERN_DEBUG "init_special_inode: bogus i_mode (%o)\n", | 
|  | mode); | 
|  | } | 
|  | EXPORT_SYMBOL(init_special_inode); |