|  | /* | 
|  | * bcm.c - Broadcast Manager to filter/send (cyclic) CAN content | 
|  | * | 
|  | * Copyright (c) 2002-2007 Volkswagen Group Electronic Research | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer. | 
|  | * 2. Redistributions in binary form must reproduce the above copyright | 
|  | *    notice, this list of conditions and the following disclaimer in the | 
|  | *    documentation and/or other materials provided with the distribution. | 
|  | * 3. Neither the name of Volkswagen nor the names of its contributors | 
|  | *    may be used to endorse or promote products derived from this software | 
|  | *    without specific prior written permission. | 
|  | * | 
|  | * Alternatively, provided that this notice is retained in full, this | 
|  | * software may be distributed under the terms of the GNU General | 
|  | * Public License ("GPL") version 2, in which case the provisions of the | 
|  | * GPL apply INSTEAD OF those given above. | 
|  | * | 
|  | * The provided data structures and external interfaces from this code | 
|  | * are not restricted to be used by modules with a GPL compatible license. | 
|  | * | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | 
|  | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
|  | * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | 
|  | * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | 
|  | * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | 
|  | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | 
|  | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | 
|  | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | 
|  | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH | 
|  | * DAMAGE. | 
|  | * | 
|  | * Send feedback to <socketcan-users@lists.berlios.de> | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/hrtimer.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/uio.h> | 
|  | #include <linux/net.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/socket.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/can.h> | 
|  | #include <linux/can/core.h> | 
|  | #include <linux/can/bcm.h> | 
|  | #include <net/sock.h> | 
|  | #include <net/net_namespace.h> | 
|  |  | 
|  | /* use of last_frames[index].can_dlc */ | 
|  | #define RX_RECV    0x40 /* received data for this element */ | 
|  | #define RX_THR     0x80 /* element not been sent due to throttle feature */ | 
|  | #define BCM_CAN_DLC_MASK 0x0F /* clean private flags in can_dlc by masking */ | 
|  |  | 
|  | /* get best masking value for can_rx_register() for a given single can_id */ | 
|  | #define REGMASK(id) ((id & CAN_RTR_FLAG) | ((id & CAN_EFF_FLAG) ? \ | 
|  | (CAN_EFF_MASK | CAN_EFF_FLAG) : CAN_SFF_MASK)) | 
|  |  | 
|  | #define CAN_BCM_VERSION "20080415" | 
|  | static __initdata const char banner[] = KERN_INFO | 
|  | "can: broadcast manager protocol (rev " CAN_BCM_VERSION ")\n"; | 
|  |  | 
|  | MODULE_DESCRIPTION("PF_CAN broadcast manager protocol"); | 
|  | MODULE_LICENSE("Dual BSD/GPL"); | 
|  | MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>"); | 
|  |  | 
|  | /* easy access to can_frame payload */ | 
|  | static inline u64 GET_U64(const struct can_frame *cp) | 
|  | { | 
|  | return *(u64 *)cp->data; | 
|  | } | 
|  |  | 
|  | struct bcm_op { | 
|  | struct list_head list; | 
|  | int ifindex; | 
|  | canid_t can_id; | 
|  | int flags; | 
|  | unsigned long frames_abs, frames_filtered; | 
|  | struct timeval ival1, ival2; | 
|  | struct hrtimer timer, thrtimer; | 
|  | ktime_t rx_stamp, kt_ival1, kt_ival2, kt_lastmsg; | 
|  | int rx_ifindex; | 
|  | int count; | 
|  | int nframes; | 
|  | int currframe; | 
|  | struct can_frame *frames; | 
|  | struct can_frame *last_frames; | 
|  | struct can_frame sframe; | 
|  | struct can_frame last_sframe; | 
|  | struct sock *sk; | 
|  | struct net_device *rx_reg_dev; | 
|  | }; | 
|  |  | 
|  | static struct proc_dir_entry *proc_dir; | 
|  |  | 
|  | struct bcm_sock { | 
|  | struct sock sk; | 
|  | int bound; | 
|  | int ifindex; | 
|  | struct notifier_block notifier; | 
|  | struct list_head rx_ops; | 
|  | struct list_head tx_ops; | 
|  | unsigned long dropped_usr_msgs; | 
|  | struct proc_dir_entry *bcm_proc_read; | 
|  | char procname [9]; /* pointer printed in ASCII with \0 */ | 
|  | }; | 
|  |  | 
|  | static inline struct bcm_sock *bcm_sk(const struct sock *sk) | 
|  | { | 
|  | return (struct bcm_sock *)sk; | 
|  | } | 
|  |  | 
|  | #define CFSIZ sizeof(struct can_frame) | 
|  | #define OPSIZ sizeof(struct bcm_op) | 
|  | #define MHSIZ sizeof(struct bcm_msg_head) | 
|  |  | 
|  | /* | 
|  | * procfs functions | 
|  | */ | 
|  | static char *bcm_proc_getifname(int ifindex) | 
|  | { | 
|  | struct net_device *dev; | 
|  |  | 
|  | if (!ifindex) | 
|  | return "any"; | 
|  |  | 
|  | /* no usage counting */ | 
|  | dev = __dev_get_by_index(&init_net, ifindex); | 
|  | if (dev) | 
|  | return dev->name; | 
|  |  | 
|  | return "???"; | 
|  | } | 
|  |  | 
|  | static int bcm_read_proc(char *page, char **start, off_t off, | 
|  | int count, int *eof, void *data) | 
|  | { | 
|  | int len = 0; | 
|  | struct sock *sk = (struct sock *)data; | 
|  | struct bcm_sock *bo = bcm_sk(sk); | 
|  | struct bcm_op *op; | 
|  |  | 
|  | len += snprintf(page + len, PAGE_SIZE - len, ">>> socket %p", | 
|  | sk->sk_socket); | 
|  | len += snprintf(page + len, PAGE_SIZE - len, " / sk %p", sk); | 
|  | len += snprintf(page + len, PAGE_SIZE - len, " / bo %p", bo); | 
|  | len += snprintf(page + len, PAGE_SIZE - len, " / dropped %lu", | 
|  | bo->dropped_usr_msgs); | 
|  | len += snprintf(page + len, PAGE_SIZE - len, " / bound %s", | 
|  | bcm_proc_getifname(bo->ifindex)); | 
|  | len += snprintf(page + len, PAGE_SIZE - len, " <<<\n"); | 
|  |  | 
|  | list_for_each_entry(op, &bo->rx_ops, list) { | 
|  |  | 
|  | unsigned long reduction; | 
|  |  | 
|  | /* print only active entries & prevent division by zero */ | 
|  | if (!op->frames_abs) | 
|  | continue; | 
|  |  | 
|  | len += snprintf(page + len, PAGE_SIZE - len, | 
|  | "rx_op: %03X %-5s ", | 
|  | op->can_id, bcm_proc_getifname(op->ifindex)); | 
|  | len += snprintf(page + len, PAGE_SIZE - len, "[%d]%c ", | 
|  | op->nframes, | 
|  | (op->flags & RX_CHECK_DLC)?'d':' '); | 
|  | if (op->kt_ival1.tv64) | 
|  | len += snprintf(page + len, PAGE_SIZE - len, | 
|  | "timeo=%lld ", | 
|  | (long long) | 
|  | ktime_to_us(op->kt_ival1)); | 
|  |  | 
|  | if (op->kt_ival2.tv64) | 
|  | len += snprintf(page + len, PAGE_SIZE - len, | 
|  | "thr=%lld ", | 
|  | (long long) | 
|  | ktime_to_us(op->kt_ival2)); | 
|  |  | 
|  | len += snprintf(page + len, PAGE_SIZE - len, | 
|  | "# recv %ld (%ld) => reduction: ", | 
|  | op->frames_filtered, op->frames_abs); | 
|  |  | 
|  | reduction = 100 - (op->frames_filtered * 100) / op->frames_abs; | 
|  |  | 
|  | len += snprintf(page + len, PAGE_SIZE - len, "%s%ld%%\n", | 
|  | (reduction == 100)?"near ":"", reduction); | 
|  |  | 
|  | if (len > PAGE_SIZE - 200) { | 
|  | /* mark output cut off */ | 
|  | len += snprintf(page + len, PAGE_SIZE - len, "(..)\n"); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | list_for_each_entry(op, &bo->tx_ops, list) { | 
|  |  | 
|  | len += snprintf(page + len, PAGE_SIZE - len, | 
|  | "tx_op: %03X %s [%d] ", | 
|  | op->can_id, bcm_proc_getifname(op->ifindex), | 
|  | op->nframes); | 
|  |  | 
|  | if (op->kt_ival1.tv64) | 
|  | len += snprintf(page + len, PAGE_SIZE - len, "t1=%lld ", | 
|  | (long long) ktime_to_us(op->kt_ival1)); | 
|  |  | 
|  | if (op->kt_ival2.tv64) | 
|  | len += snprintf(page + len, PAGE_SIZE - len, "t2=%lld ", | 
|  | (long long) ktime_to_us(op->kt_ival2)); | 
|  |  | 
|  | len += snprintf(page + len, PAGE_SIZE - len, "# sent %ld\n", | 
|  | op->frames_abs); | 
|  |  | 
|  | if (len > PAGE_SIZE - 100) { | 
|  | /* mark output cut off */ | 
|  | len += snprintf(page + len, PAGE_SIZE - len, "(..)\n"); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | len += snprintf(page + len, PAGE_SIZE - len, "\n"); | 
|  |  | 
|  | *eof = 1; | 
|  | return len; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_can_tx - send the (next) CAN frame to the appropriate CAN interface | 
|  | *              of the given bcm tx op | 
|  | */ | 
|  | static void bcm_can_tx(struct bcm_op *op) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | struct net_device *dev; | 
|  | struct can_frame *cf = &op->frames[op->currframe]; | 
|  |  | 
|  | /* no target device? => exit */ | 
|  | if (!op->ifindex) | 
|  | return; | 
|  |  | 
|  | dev = dev_get_by_index(&init_net, op->ifindex); | 
|  | if (!dev) { | 
|  | /* RFC: should this bcm_op remove itself here? */ | 
|  | return; | 
|  | } | 
|  |  | 
|  | skb = alloc_skb(CFSIZ, gfp_any()); | 
|  | if (!skb) | 
|  | goto out; | 
|  |  | 
|  | memcpy(skb_put(skb, CFSIZ), cf, CFSIZ); | 
|  |  | 
|  | /* send with loopback */ | 
|  | skb->dev = dev; | 
|  | skb->sk = op->sk; | 
|  | can_send(skb, 1); | 
|  |  | 
|  | /* update statistics */ | 
|  | op->currframe++; | 
|  | op->frames_abs++; | 
|  |  | 
|  | /* reached last frame? */ | 
|  | if (op->currframe >= op->nframes) | 
|  | op->currframe = 0; | 
|  | out: | 
|  | dev_put(dev); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_send_to_user - send a BCM message to the userspace | 
|  | *                    (consisting of bcm_msg_head + x CAN frames) | 
|  | */ | 
|  | static void bcm_send_to_user(struct bcm_op *op, struct bcm_msg_head *head, | 
|  | struct can_frame *frames, int has_timestamp) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | struct can_frame *firstframe; | 
|  | struct sockaddr_can *addr; | 
|  | struct sock *sk = op->sk; | 
|  | int datalen = head->nframes * CFSIZ; | 
|  | int err; | 
|  |  | 
|  | skb = alloc_skb(sizeof(*head) + datalen, gfp_any()); | 
|  | if (!skb) | 
|  | return; | 
|  |  | 
|  | memcpy(skb_put(skb, sizeof(*head)), head, sizeof(*head)); | 
|  |  | 
|  | if (head->nframes) { | 
|  | /* can_frames starting here */ | 
|  | firstframe = (struct can_frame *) skb_tail_pointer(skb); | 
|  |  | 
|  | memcpy(skb_put(skb, datalen), frames, datalen); | 
|  |  | 
|  | /* | 
|  | * the BCM uses the can_dlc-element of the can_frame | 
|  | * structure for internal purposes. This is only | 
|  | * relevant for updates that are generated by the | 
|  | * BCM, where nframes is 1 | 
|  | */ | 
|  | if (head->nframes == 1) | 
|  | firstframe->can_dlc &= BCM_CAN_DLC_MASK; | 
|  | } | 
|  |  | 
|  | if (has_timestamp) { | 
|  | /* restore rx timestamp */ | 
|  | skb->tstamp = op->rx_stamp; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  Put the datagram to the queue so that bcm_recvmsg() can | 
|  | *  get it from there.  We need to pass the interface index to | 
|  | *  bcm_recvmsg().  We pass a whole struct sockaddr_can in skb->cb | 
|  | *  containing the interface index. | 
|  | */ | 
|  |  | 
|  | BUILD_BUG_ON(sizeof(skb->cb) < sizeof(struct sockaddr_can)); | 
|  | addr = (struct sockaddr_can *)skb->cb; | 
|  | memset(addr, 0, sizeof(*addr)); | 
|  | addr->can_family  = AF_CAN; | 
|  | addr->can_ifindex = op->rx_ifindex; | 
|  |  | 
|  | err = sock_queue_rcv_skb(sk, skb); | 
|  | if (err < 0) { | 
|  | struct bcm_sock *bo = bcm_sk(sk); | 
|  |  | 
|  | kfree_skb(skb); | 
|  | /* don't care about overflows in this statistic */ | 
|  | bo->dropped_usr_msgs++; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_tx_timeout_handler - performes cyclic CAN frame transmissions | 
|  | */ | 
|  | static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer) | 
|  | { | 
|  | struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer); | 
|  | enum hrtimer_restart ret = HRTIMER_NORESTART; | 
|  |  | 
|  | if (op->kt_ival1.tv64 && (op->count > 0)) { | 
|  |  | 
|  | op->count--; | 
|  | if (!op->count && (op->flags & TX_COUNTEVT)) { | 
|  | struct bcm_msg_head msg_head; | 
|  |  | 
|  | /* create notification to user */ | 
|  | msg_head.opcode  = TX_EXPIRED; | 
|  | msg_head.flags   = op->flags; | 
|  | msg_head.count   = op->count; | 
|  | msg_head.ival1   = op->ival1; | 
|  | msg_head.ival2   = op->ival2; | 
|  | msg_head.can_id  = op->can_id; | 
|  | msg_head.nframes = 0; | 
|  |  | 
|  | bcm_send_to_user(op, &msg_head, NULL, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (op->kt_ival1.tv64 && (op->count > 0)) { | 
|  |  | 
|  | /* send (next) frame */ | 
|  | bcm_can_tx(op); | 
|  | hrtimer_forward(hrtimer, ktime_get(), op->kt_ival1); | 
|  | ret = HRTIMER_RESTART; | 
|  |  | 
|  | } else { | 
|  | if (op->kt_ival2.tv64) { | 
|  |  | 
|  | /* send (next) frame */ | 
|  | bcm_can_tx(op); | 
|  | hrtimer_forward(hrtimer, ktime_get(), op->kt_ival2); | 
|  | ret = HRTIMER_RESTART; | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_rx_changed - create a RX_CHANGED notification due to changed content | 
|  | */ | 
|  | static void bcm_rx_changed(struct bcm_op *op, struct can_frame *data) | 
|  | { | 
|  | struct bcm_msg_head head; | 
|  |  | 
|  | /* update statistics */ | 
|  | op->frames_filtered++; | 
|  |  | 
|  | /* prevent statistics overflow */ | 
|  | if (op->frames_filtered > ULONG_MAX/100) | 
|  | op->frames_filtered = op->frames_abs = 0; | 
|  |  | 
|  | head.opcode  = RX_CHANGED; | 
|  | head.flags   = op->flags; | 
|  | head.count   = op->count; | 
|  | head.ival1   = op->ival1; | 
|  | head.ival2   = op->ival2; | 
|  | head.can_id  = op->can_id; | 
|  | head.nframes = 1; | 
|  |  | 
|  | bcm_send_to_user(op, &head, data, 1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_rx_update_and_send - process a detected relevant receive content change | 
|  | *                          1. update the last received data | 
|  | *                          2. send a notification to the user (if possible) | 
|  | */ | 
|  | static void bcm_rx_update_and_send(struct bcm_op *op, | 
|  | struct can_frame *lastdata, | 
|  | struct can_frame *rxdata) | 
|  | { | 
|  | memcpy(lastdata, rxdata, CFSIZ); | 
|  |  | 
|  | /* mark as used */ | 
|  | lastdata->can_dlc |= RX_RECV; | 
|  |  | 
|  | /* throtteling mode inactive OR data update already on the run ? */ | 
|  | if (!op->kt_ival2.tv64 || hrtimer_callback_running(&op->thrtimer)) { | 
|  | /* send RX_CHANGED to the user immediately */ | 
|  | bcm_rx_changed(op, rxdata); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (hrtimer_active(&op->thrtimer)) { | 
|  | /* mark as 'throttled' */ | 
|  | lastdata->can_dlc |= RX_THR; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!op->kt_lastmsg.tv64) { | 
|  | /* send first RX_CHANGED to the user immediately */ | 
|  | bcm_rx_changed(op, rxdata); | 
|  | op->kt_lastmsg = ktime_get(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (ktime_us_delta(ktime_get(), op->kt_lastmsg) < | 
|  | ktime_to_us(op->kt_ival2)) { | 
|  | /* mark as 'throttled' and start timer */ | 
|  | lastdata->can_dlc |= RX_THR; | 
|  | hrtimer_start(&op->thrtimer, | 
|  | ktime_add(op->kt_lastmsg, op->kt_ival2), | 
|  | HRTIMER_MODE_ABS); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* the gap was that big, that throttling was not needed here */ | 
|  | bcm_rx_changed(op, rxdata); | 
|  | op->kt_lastmsg = ktime_get(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_rx_cmp_to_index - (bit)compares the currently received data to formerly | 
|  | *                       received data stored in op->last_frames[] | 
|  | */ | 
|  | static void bcm_rx_cmp_to_index(struct bcm_op *op, int index, | 
|  | struct can_frame *rxdata) | 
|  | { | 
|  | /* | 
|  | * no one uses the MSBs of can_dlc for comparation, | 
|  | * so we use it here to detect the first time of reception | 
|  | */ | 
|  |  | 
|  | if (!(op->last_frames[index].can_dlc & RX_RECV)) { | 
|  | /* received data for the first time => send update to user */ | 
|  | bcm_rx_update_and_send(op, &op->last_frames[index], rxdata); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* do a real check in can_frame data section */ | 
|  |  | 
|  | if ((GET_U64(&op->frames[index]) & GET_U64(rxdata)) != | 
|  | (GET_U64(&op->frames[index]) & GET_U64(&op->last_frames[index]))) { | 
|  | bcm_rx_update_and_send(op, &op->last_frames[index], rxdata); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (op->flags & RX_CHECK_DLC) { | 
|  | /* do a real check in can_frame dlc */ | 
|  | if (rxdata->can_dlc != (op->last_frames[index].can_dlc & | 
|  | BCM_CAN_DLC_MASK)) { | 
|  | bcm_rx_update_and_send(op, &op->last_frames[index], | 
|  | rxdata); | 
|  | return; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_rx_starttimer - enable timeout monitoring for CAN frame receiption | 
|  | */ | 
|  | static void bcm_rx_starttimer(struct bcm_op *op) | 
|  | { | 
|  | if (op->flags & RX_NO_AUTOTIMER) | 
|  | return; | 
|  |  | 
|  | if (op->kt_ival1.tv64) | 
|  | hrtimer_start(&op->timer, op->kt_ival1, HRTIMER_MODE_REL); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_rx_timeout_handler - when the (cyclic) CAN frame receiption timed out | 
|  | */ | 
|  | static enum hrtimer_restart bcm_rx_timeout_handler(struct hrtimer *hrtimer) | 
|  | { | 
|  | struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer); | 
|  | struct bcm_msg_head msg_head; | 
|  |  | 
|  | msg_head.opcode  = RX_TIMEOUT; | 
|  | msg_head.flags   = op->flags; | 
|  | msg_head.count   = op->count; | 
|  | msg_head.ival1   = op->ival1; | 
|  | msg_head.ival2   = op->ival2; | 
|  | msg_head.can_id  = op->can_id; | 
|  | msg_head.nframes = 0; | 
|  |  | 
|  | bcm_send_to_user(op, &msg_head, NULL, 0); | 
|  |  | 
|  | /* no restart of the timer is done here! */ | 
|  |  | 
|  | /* if user wants to be informed, when cyclic CAN-Messages come back */ | 
|  | if ((op->flags & RX_ANNOUNCE_RESUME) && op->last_frames) { | 
|  | /* clear received can_frames to indicate 'nothing received' */ | 
|  | memset(op->last_frames, 0, op->nframes * CFSIZ); | 
|  | } | 
|  |  | 
|  | return HRTIMER_NORESTART; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_rx_thr_flush - Check for throttled data and send it to the userspace | 
|  | */ | 
|  | static int bcm_rx_thr_flush(struct bcm_op *op) | 
|  | { | 
|  | int updated = 0; | 
|  |  | 
|  | if (op->nframes > 1) { | 
|  | int i; | 
|  |  | 
|  | /* for MUX filter we start at index 1 */ | 
|  | for (i = 1; i < op->nframes; i++) { | 
|  | if ((op->last_frames) && | 
|  | (op->last_frames[i].can_dlc & RX_THR)) { | 
|  | op->last_frames[i].can_dlc &= ~RX_THR; | 
|  | bcm_rx_changed(op, &op->last_frames[i]); | 
|  | updated++; | 
|  | } | 
|  | } | 
|  |  | 
|  | } else { | 
|  | /* for RX_FILTER_ID and simple filter */ | 
|  | if (op->last_frames && (op->last_frames[0].can_dlc & RX_THR)) { | 
|  | op->last_frames[0].can_dlc &= ~RX_THR; | 
|  | bcm_rx_changed(op, &op->last_frames[0]); | 
|  | updated++; | 
|  | } | 
|  | } | 
|  |  | 
|  | return updated; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_rx_thr_handler - the time for blocked content updates is over now: | 
|  | *                      Check for throttled data and send it to the userspace | 
|  | */ | 
|  | static enum hrtimer_restart bcm_rx_thr_handler(struct hrtimer *hrtimer) | 
|  | { | 
|  | struct bcm_op *op = container_of(hrtimer, struct bcm_op, thrtimer); | 
|  |  | 
|  | if (bcm_rx_thr_flush(op)) { | 
|  | hrtimer_forward(hrtimer, ktime_get(), op->kt_ival2); | 
|  | return HRTIMER_RESTART; | 
|  | } else { | 
|  | /* rearm throttle handling */ | 
|  | op->kt_lastmsg = ktime_set(0, 0); | 
|  | return HRTIMER_NORESTART; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_rx_handler - handle a CAN frame receiption | 
|  | */ | 
|  | static void bcm_rx_handler(struct sk_buff *skb, void *data) | 
|  | { | 
|  | struct bcm_op *op = (struct bcm_op *)data; | 
|  | struct can_frame rxframe; | 
|  | int i; | 
|  |  | 
|  | /* disable timeout */ | 
|  | hrtimer_cancel(&op->timer); | 
|  |  | 
|  | if (skb->len == sizeof(rxframe)) { | 
|  | memcpy(&rxframe, skb->data, sizeof(rxframe)); | 
|  | /* save rx timestamp */ | 
|  | op->rx_stamp = skb->tstamp; | 
|  | /* save originator for recvfrom() */ | 
|  | op->rx_ifindex = skb->dev->ifindex; | 
|  | /* update statistics */ | 
|  | op->frames_abs++; | 
|  | kfree_skb(skb); | 
|  |  | 
|  | } else { | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (op->can_id != rxframe.can_id) | 
|  | return; | 
|  |  | 
|  | if (op->flags & RX_RTR_FRAME) { | 
|  | /* send reply for RTR-request (placed in op->frames[0]) */ | 
|  | bcm_can_tx(op); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (op->flags & RX_FILTER_ID) { | 
|  | /* the easiest case */ | 
|  | bcm_rx_update_and_send(op, &op->last_frames[0], &rxframe); | 
|  | bcm_rx_starttimer(op); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (op->nframes == 1) { | 
|  | /* simple compare with index 0 */ | 
|  | bcm_rx_cmp_to_index(op, 0, &rxframe); | 
|  | bcm_rx_starttimer(op); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (op->nframes > 1) { | 
|  | /* | 
|  | * multiplex compare | 
|  | * | 
|  | * find the first multiplex mask that fits. | 
|  | * Remark: The MUX-mask is stored in index 0 | 
|  | */ | 
|  |  | 
|  | for (i = 1; i < op->nframes; i++) { | 
|  | if ((GET_U64(&op->frames[0]) & GET_U64(&rxframe)) == | 
|  | (GET_U64(&op->frames[0]) & | 
|  | GET_U64(&op->frames[i]))) { | 
|  | bcm_rx_cmp_to_index(op, i, &rxframe); | 
|  | break; | 
|  | } | 
|  | } | 
|  | bcm_rx_starttimer(op); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * helpers for bcm_op handling: find & delete bcm [rx|tx] op elements | 
|  | */ | 
|  | static struct bcm_op *bcm_find_op(struct list_head *ops, canid_t can_id, | 
|  | int ifindex) | 
|  | { | 
|  | struct bcm_op *op; | 
|  |  | 
|  | list_for_each_entry(op, ops, list) { | 
|  | if ((op->can_id == can_id) && (op->ifindex == ifindex)) | 
|  | return op; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void bcm_remove_op(struct bcm_op *op) | 
|  | { | 
|  | hrtimer_cancel(&op->timer); | 
|  | hrtimer_cancel(&op->thrtimer); | 
|  |  | 
|  | if ((op->frames) && (op->frames != &op->sframe)) | 
|  | kfree(op->frames); | 
|  |  | 
|  | if ((op->last_frames) && (op->last_frames != &op->last_sframe)) | 
|  | kfree(op->last_frames); | 
|  |  | 
|  | kfree(op); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void bcm_rx_unreg(struct net_device *dev, struct bcm_op *op) | 
|  | { | 
|  | if (op->rx_reg_dev == dev) { | 
|  | can_rx_unregister(dev, op->can_id, REGMASK(op->can_id), | 
|  | bcm_rx_handler, op); | 
|  |  | 
|  | /* mark as removed subscription */ | 
|  | op->rx_reg_dev = NULL; | 
|  | } else | 
|  | printk(KERN_ERR "can-bcm: bcm_rx_unreg: registered device " | 
|  | "mismatch %p %p\n", op->rx_reg_dev, dev); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_delete_rx_op - find and remove a rx op (returns number of removed ops) | 
|  | */ | 
|  | static int bcm_delete_rx_op(struct list_head *ops, canid_t can_id, int ifindex) | 
|  | { | 
|  | struct bcm_op *op, *n; | 
|  |  | 
|  | list_for_each_entry_safe(op, n, ops, list) { | 
|  | if ((op->can_id == can_id) && (op->ifindex == ifindex)) { | 
|  |  | 
|  | /* | 
|  | * Don't care if we're bound or not (due to netdev | 
|  | * problems) can_rx_unregister() is always a save | 
|  | * thing to do here. | 
|  | */ | 
|  | if (op->ifindex) { | 
|  | /* | 
|  | * Only remove subscriptions that had not | 
|  | * been removed due to NETDEV_UNREGISTER | 
|  | * in bcm_notifier() | 
|  | */ | 
|  | if (op->rx_reg_dev) { | 
|  | struct net_device *dev; | 
|  |  | 
|  | dev = dev_get_by_index(&init_net, | 
|  | op->ifindex); | 
|  | if (dev) { | 
|  | bcm_rx_unreg(dev, op); | 
|  | dev_put(dev); | 
|  | } | 
|  | } | 
|  | } else | 
|  | can_rx_unregister(NULL, op->can_id, | 
|  | REGMASK(op->can_id), | 
|  | bcm_rx_handler, op); | 
|  |  | 
|  | list_del(&op->list); | 
|  | bcm_remove_op(op); | 
|  | return 1; /* done */ | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; /* not found */ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_delete_tx_op - find and remove a tx op (returns number of removed ops) | 
|  | */ | 
|  | static int bcm_delete_tx_op(struct list_head *ops, canid_t can_id, int ifindex) | 
|  | { | 
|  | struct bcm_op *op, *n; | 
|  |  | 
|  | list_for_each_entry_safe(op, n, ops, list) { | 
|  | if ((op->can_id == can_id) && (op->ifindex == ifindex)) { | 
|  | list_del(&op->list); | 
|  | bcm_remove_op(op); | 
|  | return 1; /* done */ | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; /* not found */ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_read_op - read out a bcm_op and send it to the user (for bcm_sendmsg) | 
|  | */ | 
|  | static int bcm_read_op(struct list_head *ops, struct bcm_msg_head *msg_head, | 
|  | int ifindex) | 
|  | { | 
|  | struct bcm_op *op = bcm_find_op(ops, msg_head->can_id, ifindex); | 
|  |  | 
|  | if (!op) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* put current values into msg_head */ | 
|  | msg_head->flags   = op->flags; | 
|  | msg_head->count   = op->count; | 
|  | msg_head->ival1   = op->ival1; | 
|  | msg_head->ival2   = op->ival2; | 
|  | msg_head->nframes = op->nframes; | 
|  |  | 
|  | bcm_send_to_user(op, msg_head, op->frames, 0); | 
|  |  | 
|  | return MHSIZ; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_tx_setup - create or update a bcm tx op (for bcm_sendmsg) | 
|  | */ | 
|  | static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, | 
|  | int ifindex, struct sock *sk) | 
|  | { | 
|  | struct bcm_sock *bo = bcm_sk(sk); | 
|  | struct bcm_op *op; | 
|  | int i, err; | 
|  |  | 
|  | /* we need a real device to send frames */ | 
|  | if (!ifindex) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* we need at least one can_frame */ | 
|  | if (msg_head->nframes < 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* check the given can_id */ | 
|  | op = bcm_find_op(&bo->tx_ops, msg_head->can_id, ifindex); | 
|  |  | 
|  | if (op) { | 
|  | /* update existing BCM operation */ | 
|  |  | 
|  | /* | 
|  | * Do we need more space for the can_frames than currently | 
|  | * allocated? -> This is a _really_ unusual use-case and | 
|  | * therefore (complexity / locking) it is not supported. | 
|  | */ | 
|  | if (msg_head->nframes > op->nframes) | 
|  | return -E2BIG; | 
|  |  | 
|  | /* update can_frames content */ | 
|  | for (i = 0; i < msg_head->nframes; i++) { | 
|  | err = memcpy_fromiovec((u8 *)&op->frames[i], | 
|  | msg->msg_iov, CFSIZ); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | if (msg_head->flags & TX_CP_CAN_ID) { | 
|  | /* copy can_id into frame */ | 
|  | op->frames[i].can_id = msg_head->can_id; | 
|  | } | 
|  | } | 
|  |  | 
|  | } else { | 
|  | /* insert new BCM operation for the given can_id */ | 
|  |  | 
|  | op = kzalloc(OPSIZ, GFP_KERNEL); | 
|  | if (!op) | 
|  | return -ENOMEM; | 
|  |  | 
|  | op->can_id    = msg_head->can_id; | 
|  |  | 
|  | /* create array for can_frames and copy the data */ | 
|  | if (msg_head->nframes > 1) { | 
|  | op->frames = kmalloc(msg_head->nframes * CFSIZ, | 
|  | GFP_KERNEL); | 
|  | if (!op->frames) { | 
|  | kfree(op); | 
|  | return -ENOMEM; | 
|  | } | 
|  | } else | 
|  | op->frames = &op->sframe; | 
|  |  | 
|  | for (i = 0; i < msg_head->nframes; i++) { | 
|  | err = memcpy_fromiovec((u8 *)&op->frames[i], | 
|  | msg->msg_iov, CFSIZ); | 
|  | if (err < 0) { | 
|  | if (op->frames != &op->sframe) | 
|  | kfree(op->frames); | 
|  | kfree(op); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | if (msg_head->flags & TX_CP_CAN_ID) { | 
|  | /* copy can_id into frame */ | 
|  | op->frames[i].can_id = msg_head->can_id; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* tx_ops never compare with previous received messages */ | 
|  | op->last_frames = NULL; | 
|  |  | 
|  | /* bcm_can_tx / bcm_tx_timeout_handler needs this */ | 
|  | op->sk = sk; | 
|  | op->ifindex = ifindex; | 
|  |  | 
|  | /* initialize uninitialized (kzalloc) structure */ | 
|  | hrtimer_init(&op->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); | 
|  | op->timer.function = bcm_tx_timeout_handler; | 
|  |  | 
|  | /* currently unused in tx_ops */ | 
|  | hrtimer_init(&op->thrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); | 
|  |  | 
|  | /* add this bcm_op to the list of the tx_ops */ | 
|  | list_add(&op->list, &bo->tx_ops); | 
|  |  | 
|  | } /* if ((op = bcm_find_op(&bo->tx_ops, msg_head->can_id, ifindex))) */ | 
|  |  | 
|  | if (op->nframes != msg_head->nframes) { | 
|  | op->nframes   = msg_head->nframes; | 
|  | /* start multiple frame transmission with index 0 */ | 
|  | op->currframe = 0; | 
|  | } | 
|  |  | 
|  | /* check flags */ | 
|  |  | 
|  | op->flags = msg_head->flags; | 
|  |  | 
|  | if (op->flags & TX_RESET_MULTI_IDX) { | 
|  | /* start multiple frame transmission with index 0 */ | 
|  | op->currframe = 0; | 
|  | } | 
|  |  | 
|  | if (op->flags & SETTIMER) { | 
|  | /* set timer values */ | 
|  | op->count = msg_head->count; | 
|  | op->ival1 = msg_head->ival1; | 
|  | op->ival2 = msg_head->ival2; | 
|  | op->kt_ival1 = timeval_to_ktime(msg_head->ival1); | 
|  | op->kt_ival2 = timeval_to_ktime(msg_head->ival2); | 
|  |  | 
|  | /* disable an active timer due to zero values? */ | 
|  | if (!op->kt_ival1.tv64 && !op->kt_ival2.tv64) | 
|  | hrtimer_cancel(&op->timer); | 
|  | } | 
|  |  | 
|  | if ((op->flags & STARTTIMER) && | 
|  | ((op->kt_ival1.tv64 && op->count) || op->kt_ival2.tv64)) { | 
|  |  | 
|  | /* spec: send can_frame when starting timer */ | 
|  | op->flags |= TX_ANNOUNCE; | 
|  |  | 
|  | if (op->kt_ival1.tv64 && (op->count > 0)) { | 
|  | /* op->count-- is done in bcm_tx_timeout_handler */ | 
|  | hrtimer_start(&op->timer, op->kt_ival1, | 
|  | HRTIMER_MODE_REL); | 
|  | } else | 
|  | hrtimer_start(&op->timer, op->kt_ival2, | 
|  | HRTIMER_MODE_REL); | 
|  | } | 
|  |  | 
|  | if (op->flags & TX_ANNOUNCE) | 
|  | bcm_can_tx(op); | 
|  |  | 
|  | return msg_head->nframes * CFSIZ + MHSIZ; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_rx_setup - create or update a bcm rx op (for bcm_sendmsg) | 
|  | */ | 
|  | static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, | 
|  | int ifindex, struct sock *sk) | 
|  | { | 
|  | struct bcm_sock *bo = bcm_sk(sk); | 
|  | struct bcm_op *op; | 
|  | int do_rx_register; | 
|  | int err = 0; | 
|  |  | 
|  | if ((msg_head->flags & RX_FILTER_ID) || (!(msg_head->nframes))) { | 
|  | /* be robust against wrong usage ... */ | 
|  | msg_head->flags |= RX_FILTER_ID; | 
|  | /* ignore trailing garbage */ | 
|  | msg_head->nframes = 0; | 
|  | } | 
|  |  | 
|  | if ((msg_head->flags & RX_RTR_FRAME) && | 
|  | ((msg_head->nframes != 1) || | 
|  | (!(msg_head->can_id & CAN_RTR_FLAG)))) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* check the given can_id */ | 
|  | op = bcm_find_op(&bo->rx_ops, msg_head->can_id, ifindex); | 
|  | if (op) { | 
|  | /* update existing BCM operation */ | 
|  |  | 
|  | /* | 
|  | * Do we need more space for the can_frames than currently | 
|  | * allocated? -> This is a _really_ unusual use-case and | 
|  | * therefore (complexity / locking) it is not supported. | 
|  | */ | 
|  | if (msg_head->nframes > op->nframes) | 
|  | return -E2BIG; | 
|  |  | 
|  | if (msg_head->nframes) { | 
|  | /* update can_frames content */ | 
|  | err = memcpy_fromiovec((u8 *)op->frames, | 
|  | msg->msg_iov, | 
|  | msg_head->nframes * CFSIZ); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | /* clear last_frames to indicate 'nothing received' */ | 
|  | memset(op->last_frames, 0, msg_head->nframes * CFSIZ); | 
|  | } | 
|  |  | 
|  | op->nframes = msg_head->nframes; | 
|  |  | 
|  | /* Only an update -> do not call can_rx_register() */ | 
|  | do_rx_register = 0; | 
|  |  | 
|  | } else { | 
|  | /* insert new BCM operation for the given can_id */ | 
|  | op = kzalloc(OPSIZ, GFP_KERNEL); | 
|  | if (!op) | 
|  | return -ENOMEM; | 
|  |  | 
|  | op->can_id    = msg_head->can_id; | 
|  | op->nframes   = msg_head->nframes; | 
|  |  | 
|  | if (msg_head->nframes > 1) { | 
|  | /* create array for can_frames and copy the data */ | 
|  | op->frames = kmalloc(msg_head->nframes * CFSIZ, | 
|  | GFP_KERNEL); | 
|  | if (!op->frames) { | 
|  | kfree(op); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* create and init array for received can_frames */ | 
|  | op->last_frames = kzalloc(msg_head->nframes * CFSIZ, | 
|  | GFP_KERNEL); | 
|  | if (!op->last_frames) { | 
|  | kfree(op->frames); | 
|  | kfree(op); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | } else { | 
|  | op->frames = &op->sframe; | 
|  | op->last_frames = &op->last_sframe; | 
|  | } | 
|  |  | 
|  | if (msg_head->nframes) { | 
|  | err = memcpy_fromiovec((u8 *)op->frames, msg->msg_iov, | 
|  | msg_head->nframes * CFSIZ); | 
|  | if (err < 0) { | 
|  | if (op->frames != &op->sframe) | 
|  | kfree(op->frames); | 
|  | if (op->last_frames != &op->last_sframe) | 
|  | kfree(op->last_frames); | 
|  | kfree(op); | 
|  | return err; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* bcm_can_tx / bcm_tx_timeout_handler needs this */ | 
|  | op->sk = sk; | 
|  | op->ifindex = ifindex; | 
|  |  | 
|  | /* initialize uninitialized (kzalloc) structure */ | 
|  | hrtimer_init(&op->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); | 
|  | op->timer.function = bcm_rx_timeout_handler; | 
|  |  | 
|  | hrtimer_init(&op->thrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); | 
|  | op->thrtimer.function = bcm_rx_thr_handler; | 
|  |  | 
|  | /* add this bcm_op to the list of the rx_ops */ | 
|  | list_add(&op->list, &bo->rx_ops); | 
|  |  | 
|  | /* call can_rx_register() */ | 
|  | do_rx_register = 1; | 
|  |  | 
|  | } /* if ((op = bcm_find_op(&bo->rx_ops, msg_head->can_id, ifindex))) */ | 
|  |  | 
|  | /* check flags */ | 
|  | op->flags = msg_head->flags; | 
|  |  | 
|  | if (op->flags & RX_RTR_FRAME) { | 
|  |  | 
|  | /* no timers in RTR-mode */ | 
|  | hrtimer_cancel(&op->thrtimer); | 
|  | hrtimer_cancel(&op->timer); | 
|  |  | 
|  | /* | 
|  | * funny feature in RX(!)_SETUP only for RTR-mode: | 
|  | * copy can_id into frame BUT without RTR-flag to | 
|  | * prevent a full-load-loopback-test ... ;-] | 
|  | */ | 
|  | if ((op->flags & TX_CP_CAN_ID) || | 
|  | (op->frames[0].can_id == op->can_id)) | 
|  | op->frames[0].can_id = op->can_id & ~CAN_RTR_FLAG; | 
|  |  | 
|  | } else { | 
|  | if (op->flags & SETTIMER) { | 
|  |  | 
|  | /* set timer value */ | 
|  | op->ival1 = msg_head->ival1; | 
|  | op->ival2 = msg_head->ival2; | 
|  | op->kt_ival1 = timeval_to_ktime(msg_head->ival1); | 
|  | op->kt_ival2 = timeval_to_ktime(msg_head->ival2); | 
|  |  | 
|  | /* disable an active timer due to zero value? */ | 
|  | if (!op->kt_ival1.tv64) | 
|  | hrtimer_cancel(&op->timer); | 
|  |  | 
|  | /* | 
|  | * In any case cancel the throttle timer, flush | 
|  | * potentially blocked msgs and reset throttle handling | 
|  | */ | 
|  | op->kt_lastmsg = ktime_set(0, 0); | 
|  | hrtimer_cancel(&op->thrtimer); | 
|  | bcm_rx_thr_flush(op); | 
|  | } | 
|  |  | 
|  | if ((op->flags & STARTTIMER) && op->kt_ival1.tv64) | 
|  | hrtimer_start(&op->timer, op->kt_ival1, | 
|  | HRTIMER_MODE_REL); | 
|  | } | 
|  |  | 
|  | /* now we can register for can_ids, if we added a new bcm_op */ | 
|  | if (do_rx_register) { | 
|  | if (ifindex) { | 
|  | struct net_device *dev; | 
|  |  | 
|  | dev = dev_get_by_index(&init_net, ifindex); | 
|  | if (dev) { | 
|  | err = can_rx_register(dev, op->can_id, | 
|  | REGMASK(op->can_id), | 
|  | bcm_rx_handler, op, | 
|  | "bcm"); | 
|  |  | 
|  | op->rx_reg_dev = dev; | 
|  | dev_put(dev); | 
|  | } | 
|  |  | 
|  | } else | 
|  | err = can_rx_register(NULL, op->can_id, | 
|  | REGMASK(op->can_id), | 
|  | bcm_rx_handler, op, "bcm"); | 
|  | if (err) { | 
|  | /* this bcm rx op is broken -> remove it */ | 
|  | list_del(&op->list); | 
|  | bcm_remove_op(op); | 
|  | return err; | 
|  | } | 
|  | } | 
|  |  | 
|  | return msg_head->nframes * CFSIZ + MHSIZ; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_tx_send - send a single CAN frame to the CAN interface (for bcm_sendmsg) | 
|  | */ | 
|  | static int bcm_tx_send(struct msghdr *msg, int ifindex, struct sock *sk) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  | struct net_device *dev; | 
|  | int err; | 
|  |  | 
|  | /* we need a real device to send frames */ | 
|  | if (!ifindex) | 
|  | return -ENODEV; | 
|  |  | 
|  | skb = alloc_skb(CFSIZ, GFP_KERNEL); | 
|  |  | 
|  | if (!skb) | 
|  | return -ENOMEM; | 
|  |  | 
|  | err = memcpy_fromiovec(skb_put(skb, CFSIZ), msg->msg_iov, CFSIZ); | 
|  | if (err < 0) { | 
|  | kfree_skb(skb); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | dev = dev_get_by_index(&init_net, ifindex); | 
|  | if (!dev) { | 
|  | kfree_skb(skb); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | skb->dev = dev; | 
|  | skb->sk  = sk; | 
|  | can_send(skb, 1); /* send with loopback */ | 
|  | dev_put(dev); | 
|  |  | 
|  | return CFSIZ + MHSIZ; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bcm_sendmsg - process BCM commands (opcodes) from the userspace | 
|  | */ | 
|  | static int bcm_sendmsg(struct kiocb *iocb, struct socket *sock, | 
|  | struct msghdr *msg, size_t size) | 
|  | { | 
|  | struct sock *sk = sock->sk; | 
|  | struct bcm_sock *bo = bcm_sk(sk); | 
|  | int ifindex = bo->ifindex; /* default ifindex for this bcm_op */ | 
|  | struct bcm_msg_head msg_head; | 
|  | int ret; /* read bytes or error codes as return value */ | 
|  |  | 
|  | if (!bo->bound) | 
|  | return -ENOTCONN; | 
|  |  | 
|  | /* check for alternative ifindex for this bcm_op */ | 
|  |  | 
|  | if (!ifindex && msg->msg_name) { | 
|  | /* no bound device as default => check msg_name */ | 
|  | struct sockaddr_can *addr = | 
|  | (struct sockaddr_can *)msg->msg_name; | 
|  |  | 
|  | if (addr->can_family != AF_CAN) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* ifindex from sendto() */ | 
|  | ifindex = addr->can_ifindex; | 
|  |  | 
|  | if (ifindex) { | 
|  | struct net_device *dev; | 
|  |  | 
|  | dev = dev_get_by_index(&init_net, ifindex); | 
|  | if (!dev) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (dev->type != ARPHRD_CAN) { | 
|  | dev_put(dev); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | dev_put(dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* read message head information */ | 
|  |  | 
|  | ret = memcpy_fromiovec((u8 *)&msg_head, msg->msg_iov, MHSIZ); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | lock_sock(sk); | 
|  |  | 
|  | switch (msg_head.opcode) { | 
|  |  | 
|  | case TX_SETUP: | 
|  | ret = bcm_tx_setup(&msg_head, msg, ifindex, sk); | 
|  | break; | 
|  |  | 
|  | case RX_SETUP: | 
|  | ret = bcm_rx_setup(&msg_head, msg, ifindex, sk); | 
|  | break; | 
|  |  | 
|  | case TX_DELETE: | 
|  | if (bcm_delete_tx_op(&bo->tx_ops, msg_head.can_id, ifindex)) | 
|  | ret = MHSIZ; | 
|  | else | 
|  | ret = -EINVAL; | 
|  | break; | 
|  |  | 
|  | case RX_DELETE: | 
|  | if (bcm_delete_rx_op(&bo->rx_ops, msg_head.can_id, ifindex)) | 
|  | ret = MHSIZ; | 
|  | else | 
|  | ret = -EINVAL; | 
|  | break; | 
|  |  | 
|  | case TX_READ: | 
|  | /* reuse msg_head for the reply to TX_READ */ | 
|  | msg_head.opcode  = TX_STATUS; | 
|  | ret = bcm_read_op(&bo->tx_ops, &msg_head, ifindex); | 
|  | break; | 
|  |  | 
|  | case RX_READ: | 
|  | /* reuse msg_head for the reply to RX_READ */ | 
|  | msg_head.opcode  = RX_STATUS; | 
|  | ret = bcm_read_op(&bo->rx_ops, &msg_head, ifindex); | 
|  | break; | 
|  |  | 
|  | case TX_SEND: | 
|  | /* we need at least one can_frame */ | 
|  | if (msg_head.nframes < 1) | 
|  | ret = -EINVAL; | 
|  | else | 
|  | ret = bcm_tx_send(msg, ifindex, sk); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | release_sock(sk); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * notification handler for netdevice status changes | 
|  | */ | 
|  | static int bcm_notifier(struct notifier_block *nb, unsigned long msg, | 
|  | void *data) | 
|  | { | 
|  | struct net_device *dev = (struct net_device *)data; | 
|  | struct bcm_sock *bo = container_of(nb, struct bcm_sock, notifier); | 
|  | struct sock *sk = &bo->sk; | 
|  | struct bcm_op *op; | 
|  | int notify_enodev = 0; | 
|  |  | 
|  | if (dev_net(dev) != &init_net) | 
|  | return NOTIFY_DONE; | 
|  |  | 
|  | if (dev->type != ARPHRD_CAN) | 
|  | return NOTIFY_DONE; | 
|  |  | 
|  | switch (msg) { | 
|  |  | 
|  | case NETDEV_UNREGISTER: | 
|  | lock_sock(sk); | 
|  |  | 
|  | /* remove device specific receive entries */ | 
|  | list_for_each_entry(op, &bo->rx_ops, list) | 
|  | if (op->rx_reg_dev == dev) | 
|  | bcm_rx_unreg(dev, op); | 
|  |  | 
|  | /* remove device reference, if this is our bound device */ | 
|  | if (bo->bound && bo->ifindex == dev->ifindex) { | 
|  | bo->bound   = 0; | 
|  | bo->ifindex = 0; | 
|  | notify_enodev = 1; | 
|  | } | 
|  |  | 
|  | release_sock(sk); | 
|  |  | 
|  | if (notify_enodev) { | 
|  | sk->sk_err = ENODEV; | 
|  | if (!sock_flag(sk, SOCK_DEAD)) | 
|  | sk->sk_error_report(sk); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case NETDEV_DOWN: | 
|  | if (bo->bound && bo->ifindex == dev->ifindex) { | 
|  | sk->sk_err = ENETDOWN; | 
|  | if (!sock_flag(sk, SOCK_DEAD)) | 
|  | sk->sk_error_report(sk); | 
|  | } | 
|  | } | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * initial settings for all BCM sockets to be set at socket creation time | 
|  | */ | 
|  | static int bcm_init(struct sock *sk) | 
|  | { | 
|  | struct bcm_sock *bo = bcm_sk(sk); | 
|  |  | 
|  | bo->bound            = 0; | 
|  | bo->ifindex          = 0; | 
|  | bo->dropped_usr_msgs = 0; | 
|  | bo->bcm_proc_read    = NULL; | 
|  |  | 
|  | INIT_LIST_HEAD(&bo->tx_ops); | 
|  | INIT_LIST_HEAD(&bo->rx_ops); | 
|  |  | 
|  | /* set notifier */ | 
|  | bo->notifier.notifier_call = bcm_notifier; | 
|  |  | 
|  | register_netdevice_notifier(&bo->notifier); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * standard socket functions | 
|  | */ | 
|  | static int bcm_release(struct socket *sock) | 
|  | { | 
|  | struct sock *sk = sock->sk; | 
|  | struct bcm_sock *bo = bcm_sk(sk); | 
|  | struct bcm_op *op, *next; | 
|  |  | 
|  | /* remove bcm_ops, timer, rx_unregister(), etc. */ | 
|  |  | 
|  | unregister_netdevice_notifier(&bo->notifier); | 
|  |  | 
|  | lock_sock(sk); | 
|  |  | 
|  | list_for_each_entry_safe(op, next, &bo->tx_ops, list) | 
|  | bcm_remove_op(op); | 
|  |  | 
|  | list_for_each_entry_safe(op, next, &bo->rx_ops, list) { | 
|  | /* | 
|  | * Don't care if we're bound or not (due to netdev problems) | 
|  | * can_rx_unregister() is always a save thing to do here. | 
|  | */ | 
|  | if (op->ifindex) { | 
|  | /* | 
|  | * Only remove subscriptions that had not | 
|  | * been removed due to NETDEV_UNREGISTER | 
|  | * in bcm_notifier() | 
|  | */ | 
|  | if (op->rx_reg_dev) { | 
|  | struct net_device *dev; | 
|  |  | 
|  | dev = dev_get_by_index(&init_net, op->ifindex); | 
|  | if (dev) { | 
|  | bcm_rx_unreg(dev, op); | 
|  | dev_put(dev); | 
|  | } | 
|  | } | 
|  | } else | 
|  | can_rx_unregister(NULL, op->can_id, | 
|  | REGMASK(op->can_id), | 
|  | bcm_rx_handler, op); | 
|  |  | 
|  | bcm_remove_op(op); | 
|  | } | 
|  |  | 
|  | /* remove procfs entry */ | 
|  | if (proc_dir && bo->bcm_proc_read) | 
|  | remove_proc_entry(bo->procname, proc_dir); | 
|  |  | 
|  | /* remove device reference */ | 
|  | if (bo->bound) { | 
|  | bo->bound   = 0; | 
|  | bo->ifindex = 0; | 
|  | } | 
|  |  | 
|  | release_sock(sk); | 
|  | sock_put(sk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bcm_connect(struct socket *sock, struct sockaddr *uaddr, int len, | 
|  | int flags) | 
|  | { | 
|  | struct sockaddr_can *addr = (struct sockaddr_can *)uaddr; | 
|  | struct sock *sk = sock->sk; | 
|  | struct bcm_sock *bo = bcm_sk(sk); | 
|  |  | 
|  | if (bo->bound) | 
|  | return -EISCONN; | 
|  |  | 
|  | /* bind a device to this socket */ | 
|  | if (addr->can_ifindex) { | 
|  | struct net_device *dev; | 
|  |  | 
|  | dev = dev_get_by_index(&init_net, addr->can_ifindex); | 
|  | if (!dev) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (dev->type != ARPHRD_CAN) { | 
|  | dev_put(dev); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | bo->ifindex = dev->ifindex; | 
|  | dev_put(dev); | 
|  |  | 
|  | } else { | 
|  | /* no interface reference for ifindex = 0 ('any' CAN device) */ | 
|  | bo->ifindex = 0; | 
|  | } | 
|  |  | 
|  | bo->bound = 1; | 
|  |  | 
|  | if (proc_dir) { | 
|  | /* unique socket address as filename */ | 
|  | sprintf(bo->procname, "%p", sock); | 
|  | bo->bcm_proc_read = create_proc_read_entry(bo->procname, 0644, | 
|  | proc_dir, | 
|  | bcm_read_proc, sk); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bcm_recvmsg(struct kiocb *iocb, struct socket *sock, | 
|  | struct msghdr *msg, size_t size, int flags) | 
|  | { | 
|  | struct sock *sk = sock->sk; | 
|  | struct sk_buff *skb; | 
|  | int error = 0; | 
|  | int noblock; | 
|  | int err; | 
|  |  | 
|  | noblock =  flags & MSG_DONTWAIT; | 
|  | flags   &= ~MSG_DONTWAIT; | 
|  | skb = skb_recv_datagram(sk, flags, noblock, &error); | 
|  | if (!skb) | 
|  | return error; | 
|  |  | 
|  | if (skb->len < size) | 
|  | size = skb->len; | 
|  |  | 
|  | err = memcpy_toiovec(msg->msg_iov, skb->data, size); | 
|  | if (err < 0) { | 
|  | skb_free_datagram(sk, skb); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | sock_recv_timestamp(msg, sk, skb); | 
|  |  | 
|  | if (msg->msg_name) { | 
|  | msg->msg_namelen = sizeof(struct sockaddr_can); | 
|  | memcpy(msg->msg_name, skb->cb, msg->msg_namelen); | 
|  | } | 
|  |  | 
|  | skb_free_datagram(sk, skb); | 
|  |  | 
|  | return size; | 
|  | } | 
|  |  | 
|  | static struct proto_ops bcm_ops __read_mostly = { | 
|  | .family        = PF_CAN, | 
|  | .release       = bcm_release, | 
|  | .bind          = sock_no_bind, | 
|  | .connect       = bcm_connect, | 
|  | .socketpair    = sock_no_socketpair, | 
|  | .accept        = sock_no_accept, | 
|  | .getname       = sock_no_getname, | 
|  | .poll          = datagram_poll, | 
|  | .ioctl         = NULL,		/* use can_ioctl() from af_can.c */ | 
|  | .listen        = sock_no_listen, | 
|  | .shutdown      = sock_no_shutdown, | 
|  | .setsockopt    = sock_no_setsockopt, | 
|  | .getsockopt    = sock_no_getsockopt, | 
|  | .sendmsg       = bcm_sendmsg, | 
|  | .recvmsg       = bcm_recvmsg, | 
|  | .mmap          = sock_no_mmap, | 
|  | .sendpage      = sock_no_sendpage, | 
|  | }; | 
|  |  | 
|  | static struct proto bcm_proto __read_mostly = { | 
|  | .name       = "CAN_BCM", | 
|  | .owner      = THIS_MODULE, | 
|  | .obj_size   = sizeof(struct bcm_sock), | 
|  | .init       = bcm_init, | 
|  | }; | 
|  |  | 
|  | static struct can_proto bcm_can_proto __read_mostly = { | 
|  | .type       = SOCK_DGRAM, | 
|  | .protocol   = CAN_BCM, | 
|  | .capability = -1, | 
|  | .ops        = &bcm_ops, | 
|  | .prot       = &bcm_proto, | 
|  | }; | 
|  |  | 
|  | static int __init bcm_module_init(void) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | printk(banner); | 
|  |  | 
|  | err = can_proto_register(&bcm_can_proto); | 
|  | if (err < 0) { | 
|  | printk(KERN_ERR "can: registration of bcm protocol failed\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* create /proc/net/can-bcm directory */ | 
|  | proc_dir = proc_mkdir("can-bcm", init_net.proc_net); | 
|  |  | 
|  | if (proc_dir) | 
|  | proc_dir->owner = THIS_MODULE; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit bcm_module_exit(void) | 
|  | { | 
|  | can_proto_unregister(&bcm_can_proto); | 
|  |  | 
|  | if (proc_dir) | 
|  | proc_net_remove(&init_net, "can-bcm"); | 
|  | } | 
|  |  | 
|  | module_init(bcm_module_init); | 
|  | module_exit(bcm_module_exit); |