|  | /* | 
|  | * Adaptec AIC79xx device driver for Linux. | 
|  | * | 
|  | * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.c#171 $ | 
|  | * | 
|  | * -------------------------------------------------------------------------- | 
|  | * Copyright (c) 1994-2000 Justin T. Gibbs. | 
|  | * Copyright (c) 1997-1999 Doug Ledford | 
|  | * Copyright (c) 2000-2003 Adaptec Inc. | 
|  | * All rights reserved. | 
|  | * | 
|  | * Redistribution and use in source and binary forms, with or without | 
|  | * modification, are permitted provided that the following conditions | 
|  | * are met: | 
|  | * 1. Redistributions of source code must retain the above copyright | 
|  | *    notice, this list of conditions, and the following disclaimer, | 
|  | *    without modification. | 
|  | * 2. Redistributions in binary form must reproduce at minimum a disclaimer | 
|  | *    substantially similar to the "NO WARRANTY" disclaimer below | 
|  | *    ("Disclaimer") and any redistribution must be conditioned upon | 
|  | *    including a substantially similar Disclaimer requirement for further | 
|  | *    binary redistribution. | 
|  | * 3. Neither the names of the above-listed copyright holders nor the names | 
|  | *    of any contributors may be used to endorse or promote products derived | 
|  | *    from this software without specific prior written permission. | 
|  | * | 
|  | * Alternatively, this software may be distributed under the terms of the | 
|  | * GNU General Public License ("GPL") version 2 as published by the Free | 
|  | * Software Foundation. | 
|  | * | 
|  | * NO WARRANTY | 
|  | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
|  | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
|  | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | 
|  | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
|  | * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
|  | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
|  | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
|  | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
|  | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | 
|  | * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
|  | * POSSIBILITY OF SUCH DAMAGES. | 
|  | */ | 
|  |  | 
|  | #include "aic79xx_osm.h" | 
|  | #include "aic79xx_inline.h" | 
|  | #include <scsi/scsicam.h> | 
|  |  | 
|  | static struct scsi_transport_template *ahd_linux_transport_template = NULL; | 
|  |  | 
|  | #include <linux/init.h>		/* __setup */ | 
|  | #include <linux/mm.h>		/* For fetching system memory size */ | 
|  | #include <linux/blkdev.h>		/* For block_size() */ | 
|  | #include <linux/delay.h>	/* For ssleep/msleep */ | 
|  | #include <linux/device.h> | 
|  |  | 
|  | /* | 
|  | * Bucket size for counting good commands in between bad ones. | 
|  | */ | 
|  | #define AHD_LINUX_ERR_THRESH	1000 | 
|  |  | 
|  | /* | 
|  | * Set this to the delay in seconds after SCSI bus reset. | 
|  | * Note, we honor this only for the initial bus reset. | 
|  | * The scsi error recovery code performs its own bus settle | 
|  | * delay handling for error recovery actions. | 
|  | */ | 
|  | #ifdef CONFIG_AIC79XX_RESET_DELAY_MS | 
|  | #define AIC79XX_RESET_DELAY CONFIG_AIC79XX_RESET_DELAY_MS | 
|  | #else | 
|  | #define AIC79XX_RESET_DELAY 5000 | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * To change the default number of tagged transactions allowed per-device, | 
|  | * add a line to the lilo.conf file like: | 
|  | * append="aic79xx=verbose,tag_info:{{32,32,32,32},{32,32,32,32}}" | 
|  | * which will result in the first four devices on the first two | 
|  | * controllers being set to a tagged queue depth of 32. | 
|  | * | 
|  | * The tag_commands is an array of 16 to allow for wide and twin adapters. | 
|  | * Twin adapters will use indexes 0-7 for channel 0, and indexes 8-15 | 
|  | * for channel 1. | 
|  | */ | 
|  | typedef struct { | 
|  | uint16_t tag_commands[16];	/* Allow for wide/twin adapters. */ | 
|  | } adapter_tag_info_t; | 
|  |  | 
|  | /* | 
|  | * Modify this as you see fit for your system. | 
|  | * | 
|  | * 0			tagged queuing disabled | 
|  | * 1 <= n <= 253	n == max tags ever dispatched. | 
|  | * | 
|  | * The driver will throttle the number of commands dispatched to a | 
|  | * device if it returns queue full.  For devices with a fixed maximum | 
|  | * queue depth, the driver will eventually determine this depth and | 
|  | * lock it in (a console message is printed to indicate that a lock | 
|  | * has occurred).  On some devices, queue full is returned for a temporary | 
|  | * resource shortage.  These devices will return queue full at varying | 
|  | * depths.  The driver will throttle back when the queue fulls occur and | 
|  | * attempt to slowly increase the depth over time as the device recovers | 
|  | * from the resource shortage. | 
|  | * | 
|  | * In this example, the first line will disable tagged queueing for all | 
|  | * the devices on the first probed aic79xx adapter. | 
|  | * | 
|  | * The second line enables tagged queueing with 4 commands/LUN for IDs | 
|  | * (0, 2-11, 13-15), disables tagged queueing for ID 12, and tells the | 
|  | * driver to attempt to use up to 64 tags for ID 1. | 
|  | * | 
|  | * The third line is the same as the first line. | 
|  | * | 
|  | * The fourth line disables tagged queueing for devices 0 and 3.  It | 
|  | * enables tagged queueing for the other IDs, with 16 commands/LUN | 
|  | * for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for | 
|  | * IDs 2, 5-7, and 9-15. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * NOTE: The below structure is for reference only, the actual structure | 
|  | *       to modify in order to change things is just below this comment block. | 
|  | adapter_tag_info_t aic79xx_tag_info[] = | 
|  | { | 
|  | {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}}, | 
|  | {{4, 64, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 4, 4, 4}}, | 
|  | {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}}, | 
|  | {{0, 16, 4, 0, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}} | 
|  | }; | 
|  | */ | 
|  |  | 
|  | #ifdef CONFIG_AIC79XX_CMDS_PER_DEVICE | 
|  | #define AIC79XX_CMDS_PER_DEVICE CONFIG_AIC79XX_CMDS_PER_DEVICE | 
|  | #else | 
|  | #define AIC79XX_CMDS_PER_DEVICE AHD_MAX_QUEUE | 
|  | #endif | 
|  |  | 
|  | #define AIC79XX_CONFIGED_TAG_COMMANDS {					\ | 
|  | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\ | 
|  | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\ | 
|  | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\ | 
|  | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\ | 
|  | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\ | 
|  | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\ | 
|  | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE,		\ | 
|  | AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE		\ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * By default, use the number of commands specified by | 
|  | * the users kernel configuration. | 
|  | */ | 
|  | static adapter_tag_info_t aic79xx_tag_info[] = | 
|  | { | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS}, | 
|  | {AIC79XX_CONFIGED_TAG_COMMANDS} | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * The I/O cell on the chip is very configurable in respect to its analog | 
|  | * characteristics.  Set the defaults here; they can be overriden with | 
|  | * the proper insmod parameters. | 
|  | */ | 
|  | struct ahd_linux_iocell_opts | 
|  | { | 
|  | uint8_t	precomp; | 
|  | uint8_t	slewrate; | 
|  | uint8_t amplitude; | 
|  | }; | 
|  | #define AIC79XX_DEFAULT_PRECOMP		0xFF | 
|  | #define AIC79XX_DEFAULT_SLEWRATE	0xFF | 
|  | #define AIC79XX_DEFAULT_AMPLITUDE	0xFF | 
|  | #define AIC79XX_DEFAULT_IOOPTS			\ | 
|  | {						\ | 
|  | AIC79XX_DEFAULT_PRECOMP,		\ | 
|  | AIC79XX_DEFAULT_SLEWRATE,		\ | 
|  | AIC79XX_DEFAULT_AMPLITUDE		\ | 
|  | } | 
|  | #define AIC79XX_PRECOMP_INDEX	0 | 
|  | #define AIC79XX_SLEWRATE_INDEX	1 | 
|  | #define AIC79XX_AMPLITUDE_INDEX	2 | 
|  | static const struct ahd_linux_iocell_opts aic79xx_iocell_info[] = | 
|  | { | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS, | 
|  | AIC79XX_DEFAULT_IOOPTS | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * There should be a specific return value for this in scsi.h, but | 
|  | * it seems that most drivers ignore it. | 
|  | */ | 
|  | #define DID_UNDERFLOW   DID_ERROR | 
|  |  | 
|  | void | 
|  | ahd_print_path(struct ahd_softc *ahd, struct scb *scb) | 
|  | { | 
|  | printk("(scsi%d:%c:%d:%d): ", | 
|  | ahd->platform_data->host->host_no, | 
|  | scb != NULL ? SCB_GET_CHANNEL(ahd, scb) : 'X', | 
|  | scb != NULL ? SCB_GET_TARGET(ahd, scb) : -1, | 
|  | scb != NULL ? SCB_GET_LUN(scb) : -1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * XXX - these options apply unilaterally to _all_ adapters | 
|  | *       cards in the system.  This should be fixed.  Exceptions to this | 
|  | *       rule are noted in the comments. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Skip the scsi bus reset.  Non 0 make us skip the reset at startup.  This | 
|  | * has no effect on any later resets that might occur due to things like | 
|  | * SCSI bus timeouts. | 
|  | */ | 
|  | static uint32_t aic79xx_no_reset; | 
|  |  | 
|  | /* | 
|  | * Should we force EXTENDED translation on a controller. | 
|  | *     0 == Use whatever is in the SEEPROM or default to off | 
|  | *     1 == Use whatever is in the SEEPROM or default to on | 
|  | */ | 
|  | static uint32_t aic79xx_extended; | 
|  |  | 
|  | /* | 
|  | * PCI bus parity checking of the Adaptec controllers.  This is somewhat | 
|  | * dubious at best.  To my knowledge, this option has never actually | 
|  | * solved a PCI parity problem, but on certain machines with broken PCI | 
|  | * chipset configurations, it can generate tons of false error messages. | 
|  | * It's included in the driver for completeness. | 
|  | *   0	   = Shut off PCI parity check | 
|  | *   non-0 = Enable PCI parity check | 
|  | * | 
|  | * NOTE: you can't actually pass -1 on the lilo prompt.  So, to set this | 
|  | * variable to -1 you would actually want to simply pass the variable | 
|  | * name without a number.  That will invert the 0 which will result in | 
|  | * -1. | 
|  | */ | 
|  | static uint32_t aic79xx_pci_parity = ~0; | 
|  |  | 
|  | /* | 
|  | * There are lots of broken chipsets in the world.  Some of them will | 
|  | * violate the PCI spec when we issue byte sized memory writes to our | 
|  | * controller.  I/O mapped register access, if allowed by the given | 
|  | * platform, will work in almost all cases. | 
|  | */ | 
|  | uint32_t aic79xx_allow_memio = ~0; | 
|  |  | 
|  | /* | 
|  | * So that we can set how long each device is given as a selection timeout. | 
|  | * The table of values goes like this: | 
|  | *   0 - 256ms | 
|  | *   1 - 128ms | 
|  | *   2 - 64ms | 
|  | *   3 - 32ms | 
|  | * We default to 256ms because some older devices need a longer time | 
|  | * to respond to initial selection. | 
|  | */ | 
|  | static uint32_t aic79xx_seltime; | 
|  |  | 
|  | /* | 
|  | * Certain devices do not perform any aging on commands.  Should the | 
|  | * device be saturated by commands in one portion of the disk, it is | 
|  | * possible for transactions on far away sectors to never be serviced. | 
|  | * To handle these devices, we can periodically send an ordered tag to | 
|  | * force all outstanding transactions to be serviced prior to a new | 
|  | * transaction. | 
|  | */ | 
|  | static uint32_t aic79xx_periodic_otag; | 
|  |  | 
|  | /* Some storage boxes are using an LSI chip which has a bug making it | 
|  | * impossible to use aic79xx Rev B chip in 320 speeds.  The following | 
|  | * storage boxes have been reported to be buggy: | 
|  | * EonStor 3U 16-Bay: U16U-G3A3 | 
|  | * EonStor 2U 12-Bay: U12U-G3A3 | 
|  | * SentinelRAID: 2500F R5 / R6 | 
|  | * SentinelRAID: 2500F R1 | 
|  | * SentinelRAID: 2500F/1500F | 
|  | * SentinelRAID: 150F | 
|  | * | 
|  | * To get around this LSI bug, you can set your board to 160 mode | 
|  | * or you can enable the SLOWCRC bit. | 
|  | */ | 
|  | uint32_t aic79xx_slowcrc; | 
|  |  | 
|  | /* | 
|  | * Module information and settable options. | 
|  | */ | 
|  | static char *aic79xx = NULL; | 
|  |  | 
|  | MODULE_AUTHOR("Maintainer: Hannes Reinecke <hare@suse.de>"); | 
|  | MODULE_DESCRIPTION("Adaptec AIC790X U320 SCSI Host Bus Adapter driver"); | 
|  | MODULE_LICENSE("Dual BSD/GPL"); | 
|  | MODULE_VERSION(AIC79XX_DRIVER_VERSION); | 
|  | module_param(aic79xx, charp, 0444); | 
|  | MODULE_PARM_DESC(aic79xx, | 
|  | "period-delimited options string:\n" | 
|  | "	verbose			Enable verbose/diagnostic logging\n" | 
|  | "	allow_memio		Allow device registers to be memory mapped\n" | 
|  | "	debug			Bitmask of debug values to enable\n" | 
|  | "	no_reset		Suppress initial bus resets\n" | 
|  | "	extended		Enable extended geometry on all controllers\n" | 
|  | "	periodic_otag		Send an ordered tagged transaction\n" | 
|  | "				periodically to prevent tag starvation.\n" | 
|  | "				This may be required by some older disk\n" | 
|  | "				or drives/RAID arrays.\n" | 
|  | "	tag_info:<tag_str>	Set per-target tag depth\n" | 
|  | "	global_tag_depth:<int>	Global tag depth for all targets on all buses\n" | 
|  | "	slewrate:<slewrate_list>Set the signal slew rate (0-15).\n" | 
|  | "	precomp:<pcomp_list>	Set the signal precompensation (0-7).\n" | 
|  | "	amplitude:<int>		Set the signal amplitude (0-7).\n" | 
|  | "	seltime:<int>		Selection Timeout:\n" | 
|  | "				(0/256ms,1/128ms,2/64ms,3/32ms)\n" | 
|  | "	slowcrc			Turn on the SLOWCRC bit (Rev B only)\n" | 
|  | "\n" | 
|  | "	Sample /etc/modprobe.conf line:\n" | 
|  | "		Enable verbose logging\n" | 
|  | "		Set tag depth on Controller 2/Target 2 to 10 tags\n" | 
|  | "		Shorten the selection timeout to 128ms\n" | 
|  | "\n" | 
|  | "	options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n" | 
|  | ); | 
|  |  | 
|  | static void ahd_linux_handle_scsi_status(struct ahd_softc *, | 
|  | struct scsi_device *, | 
|  | struct scb *); | 
|  | static void ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, | 
|  | struct scsi_cmnd *cmd); | 
|  | static int ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd); | 
|  | static void ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd); | 
|  | static u_int ahd_linux_user_tagdepth(struct ahd_softc *ahd, | 
|  | struct ahd_devinfo *devinfo); | 
|  | static void ahd_linux_device_queue_depth(struct scsi_device *); | 
|  | static int ahd_linux_run_command(struct ahd_softc*, | 
|  | struct ahd_linux_device *, | 
|  | struct scsi_cmnd *); | 
|  | static void ahd_linux_setup_tag_info_global(char *p); | 
|  | static int  aic79xx_setup(char *c); | 
|  | static void ahd_freeze_simq(struct ahd_softc *ahd); | 
|  | static void ahd_release_simq(struct ahd_softc *ahd); | 
|  |  | 
|  | static int ahd_linux_unit; | 
|  |  | 
|  |  | 
|  | /************************** OS Utility Wrappers *******************************/ | 
|  | void ahd_delay(long); | 
|  | void | 
|  | ahd_delay(long usec) | 
|  | { | 
|  | /* | 
|  | * udelay on Linux can have problems for | 
|  | * multi-millisecond waits.  Wait at most | 
|  | * 1024us per call. | 
|  | */ | 
|  | while (usec > 0) { | 
|  | udelay(usec % 1024); | 
|  | usec -= 1024; | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /***************************** Low Level I/O **********************************/ | 
|  | uint8_t ahd_inb(struct ahd_softc * ahd, long port); | 
|  | void ahd_outb(struct ahd_softc * ahd, long port, uint8_t val); | 
|  | void ahd_outw_atomic(struct ahd_softc * ahd, | 
|  | long port, uint16_t val); | 
|  | void ahd_outsb(struct ahd_softc * ahd, long port, | 
|  | uint8_t *, int count); | 
|  | void ahd_insb(struct ahd_softc * ahd, long port, | 
|  | uint8_t *, int count); | 
|  |  | 
|  | uint8_t | 
|  | ahd_inb(struct ahd_softc * ahd, long port) | 
|  | { | 
|  | uint8_t x; | 
|  |  | 
|  | if (ahd->tags[0] == BUS_SPACE_MEMIO) { | 
|  | x = readb(ahd->bshs[0].maddr + port); | 
|  | } else { | 
|  | x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF)); | 
|  | } | 
|  | mb(); | 
|  | return (x); | 
|  | } | 
|  |  | 
|  | #if 0 /* unused */ | 
|  | static uint16_t | 
|  | ahd_inw_atomic(struct ahd_softc * ahd, long port) | 
|  | { | 
|  | uint8_t x; | 
|  |  | 
|  | if (ahd->tags[0] == BUS_SPACE_MEMIO) { | 
|  | x = readw(ahd->bshs[0].maddr + port); | 
|  | } else { | 
|  | x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF)); | 
|  | } | 
|  | mb(); | 
|  | return (x); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | void | 
|  | ahd_outb(struct ahd_softc * ahd, long port, uint8_t val) | 
|  | { | 
|  | if (ahd->tags[0] == BUS_SPACE_MEMIO) { | 
|  | writeb(val, ahd->bshs[0].maddr + port); | 
|  | } else { | 
|  | outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF)); | 
|  | } | 
|  | mb(); | 
|  | } | 
|  |  | 
|  | void | 
|  | ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val) | 
|  | { | 
|  | if (ahd->tags[0] == BUS_SPACE_MEMIO) { | 
|  | writew(val, ahd->bshs[0].maddr + port); | 
|  | } else { | 
|  | outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF)); | 
|  | } | 
|  | mb(); | 
|  | } | 
|  |  | 
|  | void | 
|  | ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | /* | 
|  | * There is probably a more efficient way to do this on Linux | 
|  | * but we don't use this for anything speed critical and this | 
|  | * should work. | 
|  | */ | 
|  | for (i = 0; i < count; i++) | 
|  | ahd_outb(ahd, port, *array++); | 
|  | } | 
|  |  | 
|  | void | 
|  | ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | /* | 
|  | * There is probably a more efficient way to do this on Linux | 
|  | * but we don't use this for anything speed critical and this | 
|  | * should work. | 
|  | */ | 
|  | for (i = 0; i < count; i++) | 
|  | *array++ = ahd_inb(ahd, port); | 
|  | } | 
|  |  | 
|  | /******************************* PCI Routines *********************************/ | 
|  | uint32_t | 
|  | ahd_pci_read_config(ahd_dev_softc_t pci, int reg, int width) | 
|  | { | 
|  | switch (width) { | 
|  | case 1: | 
|  | { | 
|  | uint8_t retval; | 
|  |  | 
|  | pci_read_config_byte(pci, reg, &retval); | 
|  | return (retval); | 
|  | } | 
|  | case 2: | 
|  | { | 
|  | uint16_t retval; | 
|  | pci_read_config_word(pci, reg, &retval); | 
|  | return (retval); | 
|  | } | 
|  | case 4: | 
|  | { | 
|  | uint32_t retval; | 
|  | pci_read_config_dword(pci, reg, &retval); | 
|  | return (retval); | 
|  | } | 
|  | default: | 
|  | panic("ahd_pci_read_config: Read size too big"); | 
|  | /* NOTREACHED */ | 
|  | return (0); | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | ahd_pci_write_config(ahd_dev_softc_t pci, int reg, uint32_t value, int width) | 
|  | { | 
|  | switch (width) { | 
|  | case 1: | 
|  | pci_write_config_byte(pci, reg, value); | 
|  | break; | 
|  | case 2: | 
|  | pci_write_config_word(pci, reg, value); | 
|  | break; | 
|  | case 4: | 
|  | pci_write_config_dword(pci, reg, value); | 
|  | break; | 
|  | default: | 
|  | panic("ahd_pci_write_config: Write size too big"); | 
|  | /* NOTREACHED */ | 
|  | } | 
|  | } | 
|  |  | 
|  | /****************************** Inlines ***************************************/ | 
|  | static void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*); | 
|  |  | 
|  | static void | 
|  | ahd_linux_unmap_scb(struct ahd_softc *ahd, struct scb *scb) | 
|  | { | 
|  | struct scsi_cmnd *cmd; | 
|  |  | 
|  | cmd = scb->io_ctx; | 
|  | ahd_sync_sglist(ahd, scb, BUS_DMASYNC_POSTWRITE); | 
|  | scsi_dma_unmap(cmd); | 
|  | } | 
|  |  | 
|  | /******************************** Macros **************************************/ | 
|  | #define BUILD_SCSIID(ahd, cmd)						\ | 
|  | (((scmd_id(cmd) << TID_SHIFT) & TID) | (ahd)->our_id) | 
|  |  | 
|  | /* | 
|  | * Return a string describing the driver. | 
|  | */ | 
|  | static const char * | 
|  | ahd_linux_info(struct Scsi_Host *host) | 
|  | { | 
|  | static char buffer[512]; | 
|  | char	ahd_info[256]; | 
|  | char   *bp; | 
|  | struct ahd_softc *ahd; | 
|  |  | 
|  | bp = &buffer[0]; | 
|  | ahd = *(struct ahd_softc **)host->hostdata; | 
|  | memset(bp, 0, sizeof(buffer)); | 
|  | strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev " AIC79XX_DRIVER_VERSION "\n" | 
|  | "        <"); | 
|  | strcat(bp, ahd->description); | 
|  | strcat(bp, ">\n" | 
|  | "        "); | 
|  | ahd_controller_info(ahd, ahd_info); | 
|  | strcat(bp, ahd_info); | 
|  |  | 
|  | return (bp); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Queue an SCB to the controller. | 
|  | */ | 
|  | static int | 
|  | ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *)) | 
|  | { | 
|  | struct	 ahd_softc *ahd; | 
|  | struct	 ahd_linux_device *dev = scsi_transport_device_data(cmd->device); | 
|  | int rtn = SCSI_MLQUEUE_HOST_BUSY; | 
|  |  | 
|  | ahd = *(struct ahd_softc **)cmd->device->host->hostdata; | 
|  |  | 
|  | cmd->scsi_done = scsi_done; | 
|  | cmd->result = CAM_REQ_INPROG << 16; | 
|  | rtn = ahd_linux_run_command(ahd, dev, cmd); | 
|  |  | 
|  | return rtn; | 
|  | } | 
|  |  | 
|  | static struct scsi_target ** | 
|  | ahd_linux_target_in_softc(struct scsi_target *starget) | 
|  | { | 
|  | struct	ahd_softc *ahd = | 
|  | *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata); | 
|  | unsigned int target_offset; | 
|  |  | 
|  | target_offset = starget->id; | 
|  | if (starget->channel != 0) | 
|  | target_offset += 8; | 
|  |  | 
|  | return &ahd->platform_data->starget[target_offset]; | 
|  | } | 
|  |  | 
|  | static int | 
|  | ahd_linux_target_alloc(struct scsi_target *starget) | 
|  | { | 
|  | struct	ahd_softc *ahd = | 
|  | *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata); | 
|  | struct seeprom_config *sc = ahd->seep_config; | 
|  | unsigned long flags; | 
|  | struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget); | 
|  | struct ahd_devinfo devinfo; | 
|  | struct ahd_initiator_tinfo *tinfo; | 
|  | struct ahd_tmode_tstate *tstate; | 
|  | char channel = starget->channel + 'A'; | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  |  | 
|  | BUG_ON(*ahd_targp != NULL); | 
|  |  | 
|  | *ahd_targp = starget; | 
|  |  | 
|  | if (sc) { | 
|  | int flags = sc->device_flags[starget->id]; | 
|  |  | 
|  | tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, | 
|  | starget->id, &tstate); | 
|  |  | 
|  | if ((flags  & CFPACKETIZED) == 0) { | 
|  | /* Do not negotiate packetized transfers */ | 
|  | spi_rd_strm(starget) = 0; | 
|  | spi_pcomp_en(starget) = 0; | 
|  | spi_rti(starget) = 0; | 
|  | spi_wr_flow(starget) = 0; | 
|  | spi_hold_mcs(starget) = 0; | 
|  | } else { | 
|  | if ((ahd->features & AHD_RTI) == 0) | 
|  | spi_rti(starget) = 0; | 
|  | } | 
|  |  | 
|  | if ((flags & CFQAS) == 0) | 
|  | spi_qas(starget) = 0; | 
|  |  | 
|  | /* Transinfo values have been set to BIOS settings */ | 
|  | spi_max_width(starget) = (flags & CFWIDEB) ? 1 : 0; | 
|  | spi_min_period(starget) = tinfo->user.period; | 
|  | spi_max_offset(starget) = tinfo->user.offset; | 
|  | } | 
|  |  | 
|  | tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id, | 
|  | starget->id, &tstate); | 
|  | ahd_compile_devinfo(&devinfo, ahd->our_id, starget->id, | 
|  | CAM_LUN_WILDCARD, channel, | 
|  | ROLE_INITIATOR); | 
|  | ahd_set_syncrate(ahd, &devinfo, 0, 0, 0, | 
|  | AHD_TRANS_GOAL, /*paused*/FALSE); | 
|  | ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, | 
|  | AHD_TRANS_GOAL, /*paused*/FALSE); | 
|  | ahd_unlock(ahd, &flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | ahd_linux_target_destroy(struct scsi_target *starget) | 
|  | { | 
|  | struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget); | 
|  |  | 
|  | *ahd_targp = NULL; | 
|  | } | 
|  |  | 
|  | static int | 
|  | ahd_linux_slave_alloc(struct scsi_device *sdev) | 
|  | { | 
|  | struct	ahd_softc *ahd = | 
|  | *((struct ahd_softc **)sdev->host->hostdata); | 
|  | struct ahd_linux_device *dev; | 
|  |  | 
|  | if (bootverbose) | 
|  | printf("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id); | 
|  |  | 
|  | dev = scsi_transport_device_data(sdev); | 
|  | memset(dev, 0, sizeof(*dev)); | 
|  |  | 
|  | /* | 
|  | * We start out life using untagged | 
|  | * transactions of which we allow one. | 
|  | */ | 
|  | dev->openings = 1; | 
|  |  | 
|  | /* | 
|  | * Set maxtags to 0.  This will be changed if we | 
|  | * later determine that we are dealing with | 
|  | * a tagged queuing capable device. | 
|  | */ | 
|  | dev->maxtags = 0; | 
|  |  | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | static int | 
|  | ahd_linux_slave_configure(struct scsi_device *sdev) | 
|  | { | 
|  | struct	ahd_softc *ahd; | 
|  |  | 
|  | ahd = *((struct ahd_softc **)sdev->host->hostdata); | 
|  | if (bootverbose) | 
|  | sdev_printk(KERN_INFO, sdev, "Slave Configure\n"); | 
|  |  | 
|  | ahd_linux_device_queue_depth(sdev); | 
|  |  | 
|  | /* Initial Domain Validation */ | 
|  | if (!spi_initial_dv(sdev->sdev_target)) | 
|  | spi_dv_device(sdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #if defined(__i386__) | 
|  | /* | 
|  | * Return the disk geometry for the given SCSI device. | 
|  | */ | 
|  | static int | 
|  | ahd_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev, | 
|  | sector_t capacity, int geom[]) | 
|  | { | 
|  | uint8_t *bh; | 
|  | int	 heads; | 
|  | int	 sectors; | 
|  | int	 cylinders; | 
|  | int	 ret; | 
|  | int	 extended; | 
|  | struct	 ahd_softc *ahd; | 
|  |  | 
|  | ahd = *((struct ahd_softc **)sdev->host->hostdata); | 
|  |  | 
|  | bh = scsi_bios_ptable(bdev); | 
|  | if (bh) { | 
|  | ret = scsi_partsize(bh, capacity, | 
|  | &geom[2], &geom[0], &geom[1]); | 
|  | kfree(bh); | 
|  | if (ret != -1) | 
|  | return (ret); | 
|  | } | 
|  | heads = 64; | 
|  | sectors = 32; | 
|  | cylinders = aic_sector_div(capacity, heads, sectors); | 
|  |  | 
|  | if (aic79xx_extended != 0) | 
|  | extended = 1; | 
|  | else | 
|  | extended = (ahd->flags & AHD_EXTENDED_TRANS_A) != 0; | 
|  | if (extended && cylinders >= 1024) { | 
|  | heads = 255; | 
|  | sectors = 63; | 
|  | cylinders = aic_sector_div(capacity, heads, sectors); | 
|  | } | 
|  | geom[0] = heads; | 
|  | geom[1] = sectors; | 
|  | geom[2] = cylinders; | 
|  | return (0); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Abort the current SCSI command(s). | 
|  | */ | 
|  | static int | 
|  | ahd_linux_abort(struct scsi_cmnd *cmd) | 
|  | { | 
|  | int error; | 
|  |  | 
|  | error = ahd_linux_queue_abort_cmd(cmd); | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Attempt to send a target reset message to the device that timed out. | 
|  | */ | 
|  | static int | 
|  | ahd_linux_dev_reset(struct scsi_cmnd *cmd) | 
|  | { | 
|  | struct ahd_softc *ahd; | 
|  | struct ahd_linux_device *dev; | 
|  | struct scb *reset_scb; | 
|  | u_int  cdb_byte; | 
|  | int    retval = SUCCESS; | 
|  | int    paused; | 
|  | int    wait; | 
|  | struct	ahd_initiator_tinfo *tinfo; | 
|  | struct	ahd_tmode_tstate *tstate; | 
|  | unsigned long flags; | 
|  | DECLARE_COMPLETION_ONSTACK(done); | 
|  |  | 
|  | reset_scb = NULL; | 
|  | paused = FALSE; | 
|  | wait = FALSE; | 
|  | ahd = *(struct ahd_softc **)cmd->device->host->hostdata; | 
|  |  | 
|  | scmd_printk(KERN_INFO, cmd, | 
|  | "Attempting to queue a TARGET RESET message:"); | 
|  |  | 
|  | printf("CDB:"); | 
|  | for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++) | 
|  | printf(" 0x%x", cmd->cmnd[cdb_byte]); | 
|  | printf("\n"); | 
|  |  | 
|  | /* | 
|  | * Determine if we currently own this command. | 
|  | */ | 
|  | dev = scsi_transport_device_data(cmd->device); | 
|  |  | 
|  | if (dev == NULL) { | 
|  | /* | 
|  | * No target device for this command exists, | 
|  | * so we must not still own the command. | 
|  | */ | 
|  | scmd_printk(KERN_INFO, cmd, "Is not an active device\n"); | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Generate us a new SCB | 
|  | */ | 
|  | reset_scb = ahd_get_scb(ahd, AHD_NEVER_COL_IDX); | 
|  | if (!reset_scb) { | 
|  | scmd_printk(KERN_INFO, cmd, "No SCB available\n"); | 
|  | return FAILED; | 
|  | } | 
|  |  | 
|  | tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, | 
|  | cmd->device->id, &tstate); | 
|  | reset_scb->io_ctx = cmd; | 
|  | reset_scb->platform_data->dev = dev; | 
|  | reset_scb->sg_count = 0; | 
|  | ahd_set_residual(reset_scb, 0); | 
|  | ahd_set_sense_residual(reset_scb, 0); | 
|  | reset_scb->platform_data->xfer_len = 0; | 
|  | reset_scb->hscb->control = 0; | 
|  | reset_scb->hscb->scsiid = BUILD_SCSIID(ahd,cmd); | 
|  | reset_scb->hscb->lun = cmd->device->lun; | 
|  | reset_scb->hscb->cdb_len = 0; | 
|  | reset_scb->hscb->task_management = SIU_TASKMGMT_LUN_RESET; | 
|  | reset_scb->flags |= SCB_DEVICE_RESET|SCB_RECOVERY_SCB|SCB_ACTIVE; | 
|  | if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) { | 
|  | reset_scb->flags |= SCB_PACKETIZED; | 
|  | } else { | 
|  | reset_scb->hscb->control |= MK_MESSAGE; | 
|  | } | 
|  | dev->openings--; | 
|  | dev->active++; | 
|  | dev->commands_issued++; | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  |  | 
|  | LIST_INSERT_HEAD(&ahd->pending_scbs, reset_scb, pending_links); | 
|  | ahd_queue_scb(ahd, reset_scb); | 
|  |  | 
|  | ahd->platform_data->eh_done = &done; | 
|  | ahd_unlock(ahd, &flags); | 
|  |  | 
|  | printf("%s: Device reset code sleeping\n", ahd_name(ahd)); | 
|  | if (!wait_for_completion_timeout(&done, 5 * HZ)) { | 
|  | ahd_lock(ahd, &flags); | 
|  | ahd->platform_data->eh_done = NULL; | 
|  | ahd_unlock(ahd, &flags); | 
|  | printf("%s: Device reset timer expired (active %d)\n", | 
|  | ahd_name(ahd), dev->active); | 
|  | retval = FAILED; | 
|  | } | 
|  | printf("%s: Device reset returning 0x%x\n", ahd_name(ahd), retval); | 
|  |  | 
|  | return (retval); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reset the SCSI bus. | 
|  | */ | 
|  | static int | 
|  | ahd_linux_bus_reset(struct scsi_cmnd *cmd) | 
|  | { | 
|  | struct ahd_softc *ahd; | 
|  | int    found; | 
|  | unsigned long flags; | 
|  |  | 
|  | ahd = *(struct ahd_softc **)cmd->device->host->hostdata; | 
|  | #ifdef AHD_DEBUG | 
|  | if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) | 
|  | printf("%s: Bus reset called for cmd %p\n", | 
|  | ahd_name(ahd), cmd); | 
|  | #endif | 
|  | ahd_lock(ahd, &flags); | 
|  |  | 
|  | found = ahd_reset_channel(ahd, scmd_channel(cmd) + 'A', | 
|  | /*initiate reset*/TRUE); | 
|  | ahd_unlock(ahd, &flags); | 
|  |  | 
|  | if (bootverbose) | 
|  | printf("%s: SCSI bus reset delivered. " | 
|  | "%d SCBs aborted.\n", ahd_name(ahd), found); | 
|  |  | 
|  | return (SUCCESS); | 
|  | } | 
|  |  | 
|  | struct scsi_host_template aic79xx_driver_template = { | 
|  | .module			= THIS_MODULE, | 
|  | .name			= "aic79xx", | 
|  | .proc_name		= "aic79xx", | 
|  | .proc_info		= ahd_linux_proc_info, | 
|  | .info			= ahd_linux_info, | 
|  | .queuecommand		= ahd_linux_queue, | 
|  | .eh_abort_handler	= ahd_linux_abort, | 
|  | .eh_device_reset_handler = ahd_linux_dev_reset, | 
|  | .eh_bus_reset_handler	= ahd_linux_bus_reset, | 
|  | #if defined(__i386__) | 
|  | .bios_param		= ahd_linux_biosparam, | 
|  | #endif | 
|  | .can_queue		= AHD_MAX_QUEUE, | 
|  | .this_id		= -1, | 
|  | .max_sectors		= 8192, | 
|  | .cmd_per_lun		= 2, | 
|  | .use_clustering		= ENABLE_CLUSTERING, | 
|  | .slave_alloc		= ahd_linux_slave_alloc, | 
|  | .slave_configure	= ahd_linux_slave_configure, | 
|  | .target_alloc		= ahd_linux_target_alloc, | 
|  | .target_destroy		= ahd_linux_target_destroy, | 
|  | }; | 
|  |  | 
|  | /******************************** Bus DMA *************************************/ | 
|  | int | 
|  | ahd_dma_tag_create(struct ahd_softc *ahd, bus_dma_tag_t parent, | 
|  | bus_size_t alignment, bus_size_t boundary, | 
|  | dma_addr_t lowaddr, dma_addr_t highaddr, | 
|  | bus_dma_filter_t *filter, void *filterarg, | 
|  | bus_size_t maxsize, int nsegments, | 
|  | bus_size_t maxsegsz, int flags, bus_dma_tag_t *ret_tag) | 
|  | { | 
|  | bus_dma_tag_t dmat; | 
|  |  | 
|  | dmat = malloc(sizeof(*dmat), M_DEVBUF, M_NOWAIT); | 
|  | if (dmat == NULL) | 
|  | return (ENOMEM); | 
|  |  | 
|  | /* | 
|  | * Linux is very simplistic about DMA memory.  For now don't | 
|  | * maintain all specification information.  Once Linux supplies | 
|  | * better facilities for doing these operations, or the | 
|  | * needs of this particular driver change, we might need to do | 
|  | * more here. | 
|  | */ | 
|  | dmat->alignment = alignment; | 
|  | dmat->boundary = boundary; | 
|  | dmat->maxsize = maxsize; | 
|  | *ret_tag = dmat; | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | void | 
|  | ahd_dma_tag_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat) | 
|  | { | 
|  | free(dmat, M_DEVBUF); | 
|  | } | 
|  |  | 
|  | int | 
|  | ahd_dmamem_alloc(struct ahd_softc *ahd, bus_dma_tag_t dmat, void** vaddr, | 
|  | int flags, bus_dmamap_t *mapp) | 
|  | { | 
|  | *vaddr = pci_alloc_consistent(ahd->dev_softc, | 
|  | dmat->maxsize, mapp); | 
|  | if (*vaddr == NULL) | 
|  | return (ENOMEM); | 
|  | return(0); | 
|  | } | 
|  |  | 
|  | void | 
|  | ahd_dmamem_free(struct ahd_softc *ahd, bus_dma_tag_t dmat, | 
|  | void* vaddr, bus_dmamap_t map) | 
|  | { | 
|  | pci_free_consistent(ahd->dev_softc, dmat->maxsize, | 
|  | vaddr, map); | 
|  | } | 
|  |  | 
|  | int | 
|  | ahd_dmamap_load(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map, | 
|  | void *buf, bus_size_t buflen, bus_dmamap_callback_t *cb, | 
|  | void *cb_arg, int flags) | 
|  | { | 
|  | /* | 
|  | * Assume for now that this will only be used during | 
|  | * initialization and not for per-transaction buffer mapping. | 
|  | */ | 
|  | bus_dma_segment_t stack_sg; | 
|  |  | 
|  | stack_sg.ds_addr = map; | 
|  | stack_sg.ds_len = dmat->maxsize; | 
|  | cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0); | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | void | 
|  | ahd_dmamap_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map) | 
|  | { | 
|  | } | 
|  |  | 
|  | int | 
|  | ahd_dmamap_unload(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map) | 
|  | { | 
|  | /* Nothing to do */ | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | /********************* Platform Dependent Functions ***************************/ | 
|  | static void | 
|  | ahd_linux_setup_iocell_info(u_long index, int instance, int targ, int32_t value) | 
|  | { | 
|  |  | 
|  | if ((instance >= 0) | 
|  | && (instance < ARRAY_SIZE(aic79xx_iocell_info))) { | 
|  | uint8_t *iocell_info; | 
|  |  | 
|  | iocell_info = (uint8_t*)&aic79xx_iocell_info[instance]; | 
|  | iocell_info[index] = value & 0xFFFF; | 
|  | if (bootverbose) | 
|  | printf("iocell[%d:%ld] = %d\n", instance, index, value); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | ahd_linux_setup_tag_info_global(char *p) | 
|  | { | 
|  | int tags, i, j; | 
|  |  | 
|  | tags = simple_strtoul(p + 1, NULL, 0) & 0xff; | 
|  | printf("Setting Global Tags= %d\n", tags); | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(aic79xx_tag_info); i++) { | 
|  | for (j = 0; j < AHD_NUM_TARGETS; j++) { | 
|  | aic79xx_tag_info[i].tag_commands[j] = tags; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | ahd_linux_setup_tag_info(u_long arg, int instance, int targ, int32_t value) | 
|  | { | 
|  |  | 
|  | if ((instance >= 0) && (targ >= 0) | 
|  | && (instance < ARRAY_SIZE(aic79xx_tag_info)) | 
|  | && (targ < AHD_NUM_TARGETS)) { | 
|  | aic79xx_tag_info[instance].tag_commands[targ] = value & 0x1FF; | 
|  | if (bootverbose) | 
|  | printf("tag_info[%d:%d] = %d\n", instance, targ, value); | 
|  | } | 
|  | } | 
|  |  | 
|  | static char * | 
|  | ahd_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth, | 
|  | void (*callback)(u_long, int, int, int32_t), | 
|  | u_long callback_arg) | 
|  | { | 
|  | char	*tok_end; | 
|  | char	*tok_end2; | 
|  | int      i; | 
|  | int      instance; | 
|  | int	 targ; | 
|  | int	 done; | 
|  | char	 tok_list[] = {'.', ',', '{', '}', '\0'}; | 
|  |  | 
|  | /* All options use a ':' name/arg separator */ | 
|  | if (*opt_arg != ':') | 
|  | return (opt_arg); | 
|  | opt_arg++; | 
|  | instance = -1; | 
|  | targ = -1; | 
|  | done = FALSE; | 
|  | /* | 
|  | * Restore separator that may be in | 
|  | * the middle of our option argument. | 
|  | */ | 
|  | tok_end = strchr(opt_arg, '\0'); | 
|  | if (tok_end < end) | 
|  | *tok_end = ','; | 
|  | while (!done) { | 
|  | switch (*opt_arg) { | 
|  | case '{': | 
|  | if (instance == -1) { | 
|  | instance = 0; | 
|  | } else { | 
|  | if (depth > 1) { | 
|  | if (targ == -1) | 
|  | targ = 0; | 
|  | } else { | 
|  | printf("Malformed Option %s\n", | 
|  | opt_name); | 
|  | done = TRUE; | 
|  | } | 
|  | } | 
|  | opt_arg++; | 
|  | break; | 
|  | case '}': | 
|  | if (targ != -1) | 
|  | targ = -1; | 
|  | else if (instance != -1) | 
|  | instance = -1; | 
|  | opt_arg++; | 
|  | break; | 
|  | case ',': | 
|  | case '.': | 
|  | if (instance == -1) | 
|  | done = TRUE; | 
|  | else if (targ >= 0) | 
|  | targ++; | 
|  | else if (instance >= 0) | 
|  | instance++; | 
|  | opt_arg++; | 
|  | break; | 
|  | case '\0': | 
|  | done = TRUE; | 
|  | break; | 
|  | default: | 
|  | tok_end = end; | 
|  | for (i = 0; tok_list[i]; i++) { | 
|  | tok_end2 = strchr(opt_arg, tok_list[i]); | 
|  | if ((tok_end2) && (tok_end2 < tok_end)) | 
|  | tok_end = tok_end2; | 
|  | } | 
|  | callback(callback_arg, instance, targ, | 
|  | simple_strtol(opt_arg, NULL, 0)); | 
|  | opt_arg = tok_end; | 
|  | break; | 
|  | } | 
|  | } | 
|  | return (opt_arg); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Handle Linux boot parameters. This routine allows for assigning a value | 
|  | * to a parameter with a ':' between the parameter and the value. | 
|  | * ie. aic79xx=stpwlev:1,extended | 
|  | */ | 
|  | static int | 
|  | aic79xx_setup(char *s) | 
|  | { | 
|  | int	i, n; | 
|  | char   *p; | 
|  | char   *end; | 
|  |  | 
|  | static const struct { | 
|  | const char *name; | 
|  | uint32_t *flag; | 
|  | } options[] = { | 
|  | { "extended", &aic79xx_extended }, | 
|  | { "no_reset", &aic79xx_no_reset }, | 
|  | { "verbose", &aic79xx_verbose }, | 
|  | { "allow_memio", &aic79xx_allow_memio}, | 
|  | #ifdef AHD_DEBUG | 
|  | { "debug", &ahd_debug }, | 
|  | #endif | 
|  | { "periodic_otag", &aic79xx_periodic_otag }, | 
|  | { "pci_parity", &aic79xx_pci_parity }, | 
|  | { "seltime", &aic79xx_seltime }, | 
|  | { "tag_info", NULL }, | 
|  | { "global_tag_depth", NULL}, | 
|  | { "slewrate", NULL }, | 
|  | { "precomp", NULL }, | 
|  | { "amplitude", NULL }, | 
|  | { "slowcrc", &aic79xx_slowcrc }, | 
|  | }; | 
|  |  | 
|  | end = strchr(s, '\0'); | 
|  |  | 
|  | /* | 
|  | * XXX ia64 gcc isn't smart enough to know that ARRAY_SIZE | 
|  | * will never be 0 in this case. | 
|  | */ | 
|  | n = 0; | 
|  |  | 
|  | while ((p = strsep(&s, ",.")) != NULL) { | 
|  | if (*p == '\0') | 
|  | continue; | 
|  | for (i = 0; i < ARRAY_SIZE(options); i++) { | 
|  |  | 
|  | n = strlen(options[i].name); | 
|  | if (strncmp(options[i].name, p, n) == 0) | 
|  | break; | 
|  | } | 
|  | if (i == ARRAY_SIZE(options)) | 
|  | continue; | 
|  |  | 
|  | if (strncmp(p, "global_tag_depth", n) == 0) { | 
|  | ahd_linux_setup_tag_info_global(p + n); | 
|  | } else if (strncmp(p, "tag_info", n) == 0) { | 
|  | s = ahd_parse_brace_option("tag_info", p + n, end, | 
|  | 2, ahd_linux_setup_tag_info, 0); | 
|  | } else if (strncmp(p, "slewrate", n) == 0) { | 
|  | s = ahd_parse_brace_option("slewrate", | 
|  | p + n, end, 1, ahd_linux_setup_iocell_info, | 
|  | AIC79XX_SLEWRATE_INDEX); | 
|  | } else if (strncmp(p, "precomp", n) == 0) { | 
|  | s = ahd_parse_brace_option("precomp", | 
|  | p + n, end, 1, ahd_linux_setup_iocell_info, | 
|  | AIC79XX_PRECOMP_INDEX); | 
|  | } else if (strncmp(p, "amplitude", n) == 0) { | 
|  | s = ahd_parse_brace_option("amplitude", | 
|  | p + n, end, 1, ahd_linux_setup_iocell_info, | 
|  | AIC79XX_AMPLITUDE_INDEX); | 
|  | } else if (p[n] == ':') { | 
|  | *(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0); | 
|  | } else if (!strncmp(p, "verbose", n)) { | 
|  | *(options[i].flag) = 1; | 
|  | } else { | 
|  | *(options[i].flag) ^= 0xFFFFFFFF; | 
|  | } | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | __setup("aic79xx=", aic79xx_setup); | 
|  |  | 
|  | uint32_t aic79xx_verbose; | 
|  |  | 
|  | int | 
|  | ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *template) | 
|  | { | 
|  | char	buf[80]; | 
|  | struct	Scsi_Host *host; | 
|  | char	*new_name; | 
|  | u_long	s; | 
|  | int	retval; | 
|  |  | 
|  | template->name = ahd->description; | 
|  | host = scsi_host_alloc(template, sizeof(struct ahd_softc *)); | 
|  | if (host == NULL) | 
|  | return (ENOMEM); | 
|  |  | 
|  | *((struct ahd_softc **)host->hostdata) = ahd; | 
|  | ahd->platform_data->host = host; | 
|  | host->can_queue = AHD_MAX_QUEUE; | 
|  | host->cmd_per_lun = 2; | 
|  | host->sg_tablesize = AHD_NSEG; | 
|  | host->this_id = ahd->our_id; | 
|  | host->irq = ahd->platform_data->irq; | 
|  | host->max_id = (ahd->features & AHD_WIDE) ? 16 : 8; | 
|  | host->max_lun = AHD_NUM_LUNS; | 
|  | host->max_channel = 0; | 
|  | host->sg_tablesize = AHD_NSEG; | 
|  | ahd_lock(ahd, &s); | 
|  | ahd_set_unit(ahd, ahd_linux_unit++); | 
|  | ahd_unlock(ahd, &s); | 
|  | sprintf(buf, "scsi%d", host->host_no); | 
|  | new_name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT); | 
|  | if (new_name != NULL) { | 
|  | strcpy(new_name, buf); | 
|  | ahd_set_name(ahd, new_name); | 
|  | } | 
|  | host->unique_id = ahd->unit; | 
|  | ahd_linux_initialize_scsi_bus(ahd); | 
|  | ahd_intr_enable(ahd, TRUE); | 
|  |  | 
|  | host->transportt = ahd_linux_transport_template; | 
|  |  | 
|  | retval = scsi_add_host(host, &ahd->dev_softc->dev); | 
|  | if (retval) { | 
|  | printk(KERN_WARNING "aic79xx: scsi_add_host failed\n"); | 
|  | scsi_host_put(host); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | scsi_scan_host(host); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Place the SCSI bus into a known state by either resetting it, | 
|  | * or forcing transfer negotiations on the next command to any | 
|  | * target. | 
|  | */ | 
|  | static void | 
|  | ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd) | 
|  | { | 
|  | u_int target_id; | 
|  | u_int numtarg; | 
|  | unsigned long s; | 
|  |  | 
|  | target_id = 0; | 
|  | numtarg = 0; | 
|  |  | 
|  | if (aic79xx_no_reset != 0) | 
|  | ahd->flags &= ~AHD_RESET_BUS_A; | 
|  |  | 
|  | if ((ahd->flags & AHD_RESET_BUS_A) != 0) | 
|  | ahd_reset_channel(ahd, 'A', /*initiate_reset*/TRUE); | 
|  | else | 
|  | numtarg = (ahd->features & AHD_WIDE) ? 16 : 8; | 
|  |  | 
|  | ahd_lock(ahd, &s); | 
|  |  | 
|  | /* | 
|  | * Force negotiation to async for all targets that | 
|  | * will not see an initial bus reset. | 
|  | */ | 
|  | for (; target_id < numtarg; target_id++) { | 
|  | struct ahd_devinfo devinfo; | 
|  | struct ahd_initiator_tinfo *tinfo; | 
|  | struct ahd_tmode_tstate *tstate; | 
|  |  | 
|  | tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, | 
|  | target_id, &tstate); | 
|  | ahd_compile_devinfo(&devinfo, ahd->our_id, target_id, | 
|  | CAM_LUN_WILDCARD, 'A', ROLE_INITIATOR); | 
|  | ahd_update_neg_request(ahd, &devinfo, tstate, | 
|  | tinfo, AHD_NEG_ALWAYS); | 
|  | } | 
|  | ahd_unlock(ahd, &s); | 
|  | /* Give the bus some time to recover */ | 
|  | if ((ahd->flags & AHD_RESET_BUS_A) != 0) { | 
|  | ahd_freeze_simq(ahd); | 
|  | msleep(AIC79XX_RESET_DELAY); | 
|  | ahd_release_simq(ahd); | 
|  | } | 
|  | } | 
|  |  | 
|  | int | 
|  | ahd_platform_alloc(struct ahd_softc *ahd, void *platform_arg) | 
|  | { | 
|  | ahd->platform_data = | 
|  | malloc(sizeof(struct ahd_platform_data), M_DEVBUF, M_NOWAIT); | 
|  | if (ahd->platform_data == NULL) | 
|  | return (ENOMEM); | 
|  | memset(ahd->platform_data, 0, sizeof(struct ahd_platform_data)); | 
|  | ahd->platform_data->irq = AHD_LINUX_NOIRQ; | 
|  | ahd_lockinit(ahd); | 
|  | ahd->seltime = (aic79xx_seltime & 0x3) << 4; | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | void | 
|  | ahd_platform_free(struct ahd_softc *ahd) | 
|  | { | 
|  | struct scsi_target *starget; | 
|  | int i; | 
|  |  | 
|  | if (ahd->platform_data != NULL) { | 
|  | /* destroy all of the device and target objects */ | 
|  | for (i = 0; i < AHD_NUM_TARGETS; i++) { | 
|  | starget = ahd->platform_data->starget[i]; | 
|  | if (starget != NULL) { | 
|  | ahd->platform_data->starget[i] = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ahd->platform_data->irq != AHD_LINUX_NOIRQ) | 
|  | free_irq(ahd->platform_data->irq, ahd); | 
|  | if (ahd->tags[0] == BUS_SPACE_PIO | 
|  | && ahd->bshs[0].ioport != 0) | 
|  | release_region(ahd->bshs[0].ioport, 256); | 
|  | if (ahd->tags[1] == BUS_SPACE_PIO | 
|  | && ahd->bshs[1].ioport != 0) | 
|  | release_region(ahd->bshs[1].ioport, 256); | 
|  | if (ahd->tags[0] == BUS_SPACE_MEMIO | 
|  | && ahd->bshs[0].maddr != NULL) { | 
|  | iounmap(ahd->bshs[0].maddr); | 
|  | release_mem_region(ahd->platform_data->mem_busaddr, | 
|  | 0x1000); | 
|  | } | 
|  | if (ahd->platform_data->host) | 
|  | scsi_host_put(ahd->platform_data->host); | 
|  |  | 
|  | free(ahd->platform_data, M_DEVBUF); | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | ahd_platform_init(struct ahd_softc *ahd) | 
|  | { | 
|  | /* | 
|  | * Lookup and commit any modified IO Cell options. | 
|  | */ | 
|  | if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) { | 
|  | const struct ahd_linux_iocell_opts *iocell_opts; | 
|  |  | 
|  | iocell_opts = &aic79xx_iocell_info[ahd->unit]; | 
|  | if (iocell_opts->precomp != AIC79XX_DEFAULT_PRECOMP) | 
|  | AHD_SET_PRECOMP(ahd, iocell_opts->precomp); | 
|  | if (iocell_opts->slewrate != AIC79XX_DEFAULT_SLEWRATE) | 
|  | AHD_SET_SLEWRATE(ahd, iocell_opts->slewrate); | 
|  | if (iocell_opts->amplitude != AIC79XX_DEFAULT_AMPLITUDE) | 
|  | AHD_SET_AMPLITUDE(ahd, iocell_opts->amplitude); | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | void | 
|  | ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb) | 
|  | { | 
|  | ahd_platform_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), | 
|  | SCB_GET_CHANNEL(ahd, scb), | 
|  | SCB_GET_LUN(scb), SCB_LIST_NULL, | 
|  | ROLE_UNKNOWN, CAM_REQUEUE_REQ); | 
|  | } | 
|  |  | 
|  | void | 
|  | ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev, | 
|  | struct ahd_devinfo *devinfo, ahd_queue_alg alg) | 
|  | { | 
|  | struct ahd_linux_device *dev; | 
|  | int was_queuing; | 
|  | int now_queuing; | 
|  |  | 
|  | if (sdev == NULL) | 
|  | return; | 
|  |  | 
|  | dev = scsi_transport_device_data(sdev); | 
|  |  | 
|  | if (dev == NULL) | 
|  | return; | 
|  | was_queuing = dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED); | 
|  | switch (alg) { | 
|  | default: | 
|  | case AHD_QUEUE_NONE: | 
|  | now_queuing = 0; | 
|  | break; | 
|  | case AHD_QUEUE_BASIC: | 
|  | now_queuing = AHD_DEV_Q_BASIC; | 
|  | break; | 
|  | case AHD_QUEUE_TAGGED: | 
|  | now_queuing = AHD_DEV_Q_TAGGED; | 
|  | break; | 
|  | } | 
|  | if ((dev->flags & AHD_DEV_FREEZE_TIL_EMPTY) == 0 | 
|  | && (was_queuing != now_queuing) | 
|  | && (dev->active != 0)) { | 
|  | dev->flags |= AHD_DEV_FREEZE_TIL_EMPTY; | 
|  | dev->qfrozen++; | 
|  | } | 
|  |  | 
|  | dev->flags &= ~(AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED|AHD_DEV_PERIODIC_OTAG); | 
|  | if (now_queuing) { | 
|  | u_int usertags; | 
|  |  | 
|  | usertags = ahd_linux_user_tagdepth(ahd, devinfo); | 
|  | if (!was_queuing) { | 
|  | /* | 
|  | * Start out agressively and allow our | 
|  | * dynamic queue depth algorithm to take | 
|  | * care of the rest. | 
|  | */ | 
|  | dev->maxtags = usertags; | 
|  | dev->openings = dev->maxtags - dev->active; | 
|  | } | 
|  | if (dev->maxtags == 0) { | 
|  | /* | 
|  | * Queueing is disabled by the user. | 
|  | */ | 
|  | dev->openings = 1; | 
|  | } else if (alg == AHD_QUEUE_TAGGED) { | 
|  | dev->flags |= AHD_DEV_Q_TAGGED; | 
|  | if (aic79xx_periodic_otag != 0) | 
|  | dev->flags |= AHD_DEV_PERIODIC_OTAG; | 
|  | } else | 
|  | dev->flags |= AHD_DEV_Q_BASIC; | 
|  | } else { | 
|  | /* We can only have one opening. */ | 
|  | dev->maxtags = 0; | 
|  | dev->openings =  1 - dev->active; | 
|  | } | 
|  |  | 
|  | switch ((dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED))) { | 
|  | case AHD_DEV_Q_BASIC: | 
|  | scsi_set_tag_type(sdev, MSG_SIMPLE_TASK); | 
|  | scsi_activate_tcq(sdev, dev->openings + dev->active); | 
|  | break; | 
|  | case AHD_DEV_Q_TAGGED: | 
|  | scsi_set_tag_type(sdev, MSG_ORDERED_TASK); | 
|  | scsi_activate_tcq(sdev, dev->openings + dev->active); | 
|  | break; | 
|  | default: | 
|  | /* | 
|  | * We allow the OS to queue 2 untagged transactions to | 
|  | * us at any time even though we can only execute them | 
|  | * serially on the controller/device.  This should | 
|  | * remove some latency. | 
|  | */ | 
|  | scsi_deactivate_tcq(sdev, 1); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | int | 
|  | ahd_platform_abort_scbs(struct ahd_softc *ahd, int target, char channel, | 
|  | int lun, u_int tag, role_t role, uint32_t status) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u_int | 
|  | ahd_linux_user_tagdepth(struct ahd_softc *ahd, struct ahd_devinfo *devinfo) | 
|  | { | 
|  | static int warned_user; | 
|  | u_int tags; | 
|  |  | 
|  | tags = 0; | 
|  | if ((ahd->user_discenable & devinfo->target_mask) != 0) { | 
|  | if (ahd->unit >= ARRAY_SIZE(aic79xx_tag_info)) { | 
|  |  | 
|  | if (warned_user == 0) { | 
|  | printf(KERN_WARNING | 
|  | "aic79xx: WARNING: Insufficient tag_info instances\n" | 
|  | "aic79xx: for installed controllers.  Using defaults\n" | 
|  | "aic79xx: Please update the aic79xx_tag_info array in\n" | 
|  | "aic79xx: the aic79xx_osm.c source file.\n"); | 
|  | warned_user++; | 
|  | } | 
|  | tags = AHD_MAX_QUEUE; | 
|  | } else { | 
|  | adapter_tag_info_t *tag_info; | 
|  |  | 
|  | tag_info = &aic79xx_tag_info[ahd->unit]; | 
|  | tags = tag_info->tag_commands[devinfo->target_offset]; | 
|  | if (tags > AHD_MAX_QUEUE) | 
|  | tags = AHD_MAX_QUEUE; | 
|  | } | 
|  | } | 
|  | return (tags); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Determines the queue depth for a given device. | 
|  | */ | 
|  | static void | 
|  | ahd_linux_device_queue_depth(struct scsi_device *sdev) | 
|  | { | 
|  | struct	ahd_devinfo devinfo; | 
|  | u_int	tags; | 
|  | struct ahd_softc *ahd = *((struct ahd_softc **)sdev->host->hostdata); | 
|  |  | 
|  | ahd_compile_devinfo(&devinfo, | 
|  | ahd->our_id, | 
|  | sdev->sdev_target->id, sdev->lun, | 
|  | sdev->sdev_target->channel == 0 ? 'A' : 'B', | 
|  | ROLE_INITIATOR); | 
|  | tags = ahd_linux_user_tagdepth(ahd, &devinfo); | 
|  | if (tags != 0 && sdev->tagged_supported != 0) { | 
|  |  | 
|  | ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_TAGGED); | 
|  | ahd_send_async(ahd, devinfo.channel, devinfo.target, | 
|  | devinfo.lun, AC_TRANSFER_NEG); | 
|  | ahd_print_devinfo(ahd, &devinfo); | 
|  | printf("Tagged Queuing enabled.  Depth %d\n", tags); | 
|  | } else { | 
|  | ahd_platform_set_tags(ahd, sdev, &devinfo, AHD_QUEUE_NONE); | 
|  | ahd_send_async(ahd, devinfo.channel, devinfo.target, | 
|  | devinfo.lun, AC_TRANSFER_NEG); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int | 
|  | ahd_linux_run_command(struct ahd_softc *ahd, struct ahd_linux_device *dev, | 
|  | struct scsi_cmnd *cmd) | 
|  | { | 
|  | struct	 scb *scb; | 
|  | struct	 hardware_scb *hscb; | 
|  | struct	 ahd_initiator_tinfo *tinfo; | 
|  | struct	 ahd_tmode_tstate *tstate; | 
|  | u_int	 col_idx; | 
|  | uint16_t mask; | 
|  | unsigned long flags; | 
|  | int nseg; | 
|  |  | 
|  | nseg = scsi_dma_map(cmd); | 
|  | if (nseg < 0) | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  |  | 
|  | /* | 
|  | * Get an scb to use. | 
|  | */ | 
|  | tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id, | 
|  | cmd->device->id, &tstate); | 
|  | if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) == 0 | 
|  | || (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) { | 
|  | col_idx = AHD_NEVER_COL_IDX; | 
|  | } else { | 
|  | col_idx = AHD_BUILD_COL_IDX(cmd->device->id, | 
|  | cmd->device->lun); | 
|  | } | 
|  | if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) { | 
|  | ahd->flags |= AHD_RESOURCE_SHORTAGE; | 
|  | ahd_unlock(ahd, &flags); | 
|  | scsi_dma_unmap(cmd); | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  | } | 
|  |  | 
|  | scb->io_ctx = cmd; | 
|  | scb->platform_data->dev = dev; | 
|  | hscb = scb->hscb; | 
|  | cmd->host_scribble = (char *)scb; | 
|  |  | 
|  | /* | 
|  | * Fill out basics of the HSCB. | 
|  | */ | 
|  | hscb->control = 0; | 
|  | hscb->scsiid = BUILD_SCSIID(ahd, cmd); | 
|  | hscb->lun = cmd->device->lun; | 
|  | scb->hscb->task_management = 0; | 
|  | mask = SCB_GET_TARGET_MASK(ahd, scb); | 
|  |  | 
|  | if ((ahd->user_discenable & mask) != 0) | 
|  | hscb->control |= DISCENB; | 
|  |  | 
|  | if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) | 
|  | scb->flags |= SCB_PACKETIZED; | 
|  |  | 
|  | if ((tstate->auto_negotiate & mask) != 0) { | 
|  | scb->flags |= SCB_AUTO_NEGOTIATE; | 
|  | scb->hscb->control |= MK_MESSAGE; | 
|  | } | 
|  |  | 
|  | if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) { | 
|  | int	msg_bytes; | 
|  | uint8_t tag_msgs[2]; | 
|  |  | 
|  | msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs); | 
|  | if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) { | 
|  | hscb->control |= tag_msgs[0]; | 
|  | if (tag_msgs[0] == MSG_ORDERED_TASK) | 
|  | dev->commands_since_idle_or_otag = 0; | 
|  | } else | 
|  | if (dev->commands_since_idle_or_otag == AHD_OTAG_THRESH | 
|  | && (dev->flags & AHD_DEV_Q_TAGGED) != 0) { | 
|  | hscb->control |= MSG_ORDERED_TASK; | 
|  | dev->commands_since_idle_or_otag = 0; | 
|  | } else { | 
|  | hscb->control |= MSG_SIMPLE_TASK; | 
|  | } | 
|  | } | 
|  |  | 
|  | hscb->cdb_len = cmd->cmd_len; | 
|  | memcpy(hscb->shared_data.idata.cdb, cmd->cmnd, hscb->cdb_len); | 
|  |  | 
|  | scb->platform_data->xfer_len = 0; | 
|  | ahd_set_residual(scb, 0); | 
|  | ahd_set_sense_residual(scb, 0); | 
|  | scb->sg_count = 0; | 
|  |  | 
|  | if (nseg > 0) { | 
|  | void *sg = scb->sg_list; | 
|  | struct scatterlist *cur_seg; | 
|  | int i; | 
|  |  | 
|  | scb->platform_data->xfer_len = 0; | 
|  |  | 
|  | scsi_for_each_sg(cmd, cur_seg, nseg, i) { | 
|  | dma_addr_t addr; | 
|  | bus_size_t len; | 
|  |  | 
|  | addr = sg_dma_address(cur_seg); | 
|  | len = sg_dma_len(cur_seg); | 
|  | scb->platform_data->xfer_len += len; | 
|  | sg = ahd_sg_setup(ahd, scb, sg, addr, len, | 
|  | i == (nseg - 1)); | 
|  | } | 
|  | } | 
|  |  | 
|  | LIST_INSERT_HEAD(&ahd->pending_scbs, scb, pending_links); | 
|  | dev->openings--; | 
|  | dev->active++; | 
|  | dev->commands_issued++; | 
|  |  | 
|  | if ((dev->flags & AHD_DEV_PERIODIC_OTAG) != 0) | 
|  | dev->commands_since_idle_or_otag++; | 
|  | scb->flags |= SCB_ACTIVE; | 
|  | ahd_queue_scb(ahd, scb); | 
|  |  | 
|  | ahd_unlock(ahd, &flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * SCSI controller interrupt handler. | 
|  | */ | 
|  | irqreturn_t | 
|  | ahd_linux_isr(int irq, void *dev_id) | 
|  | { | 
|  | struct	ahd_softc *ahd; | 
|  | u_long	flags; | 
|  | int	ours; | 
|  |  | 
|  | ahd = (struct ahd_softc *) dev_id; | 
|  | ahd_lock(ahd, &flags); | 
|  | ours = ahd_intr(ahd); | 
|  | ahd_unlock(ahd, &flags); | 
|  | return IRQ_RETVAL(ours); | 
|  | } | 
|  |  | 
|  | void | 
|  | ahd_send_async(struct ahd_softc *ahd, char channel, | 
|  | u_int target, u_int lun, ac_code code) | 
|  | { | 
|  | switch (code) { | 
|  | case AC_TRANSFER_NEG: | 
|  | { | 
|  | char	buf[80]; | 
|  | struct  scsi_target *starget; | 
|  | struct	info_str info; | 
|  | struct	ahd_initiator_tinfo *tinfo; | 
|  | struct	ahd_tmode_tstate *tstate; | 
|  | unsigned int target_ppr_options; | 
|  |  | 
|  | BUG_ON(target == CAM_TARGET_WILDCARD); | 
|  |  | 
|  | info.buffer = buf; | 
|  | info.length = sizeof(buf); | 
|  | info.offset = 0; | 
|  | info.pos = 0; | 
|  | tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id, | 
|  | target, &tstate); | 
|  |  | 
|  | /* | 
|  | * Don't bother reporting results while | 
|  | * negotiations are still pending. | 
|  | */ | 
|  | if (tinfo->curr.period != tinfo->goal.period | 
|  | || tinfo->curr.width != tinfo->goal.width | 
|  | || tinfo->curr.offset != tinfo->goal.offset | 
|  | || tinfo->curr.ppr_options != tinfo->goal.ppr_options) | 
|  | if (bootverbose == 0) | 
|  | break; | 
|  |  | 
|  | /* | 
|  | * Don't bother reporting results that | 
|  | * are identical to those last reported. | 
|  | */ | 
|  | starget = ahd->platform_data->starget[target]; | 
|  | if (starget == NULL) | 
|  | break; | 
|  |  | 
|  | target_ppr_options = | 
|  | (spi_dt(starget) ? MSG_EXT_PPR_DT_REQ : 0) | 
|  | + (spi_qas(starget) ? MSG_EXT_PPR_QAS_REQ : 0) | 
|  | + (spi_iu(starget) ?  MSG_EXT_PPR_IU_REQ : 0) | 
|  | + (spi_rd_strm(starget) ? MSG_EXT_PPR_RD_STRM : 0) | 
|  | + (spi_pcomp_en(starget) ? MSG_EXT_PPR_PCOMP_EN : 0) | 
|  | + (spi_rti(starget) ? MSG_EXT_PPR_RTI : 0) | 
|  | + (spi_wr_flow(starget) ? MSG_EXT_PPR_WR_FLOW : 0) | 
|  | + (spi_hold_mcs(starget) ? MSG_EXT_PPR_HOLD_MCS : 0); | 
|  |  | 
|  | if (tinfo->curr.period == spi_period(starget) | 
|  | && tinfo->curr.width == spi_width(starget) | 
|  | && tinfo->curr.offset == spi_offset(starget) | 
|  | && tinfo->curr.ppr_options == target_ppr_options) | 
|  | if (bootverbose == 0) | 
|  | break; | 
|  |  | 
|  | spi_period(starget) = tinfo->curr.period; | 
|  | spi_width(starget) = tinfo->curr.width; | 
|  | spi_offset(starget) = tinfo->curr.offset; | 
|  | spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0; | 
|  | spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0; | 
|  | spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0; | 
|  | spi_rd_strm(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RD_STRM ? 1 : 0; | 
|  | spi_pcomp_en(starget) =  tinfo->curr.ppr_options & MSG_EXT_PPR_PCOMP_EN ? 1 : 0; | 
|  | spi_rti(starget) =  tinfo->curr.ppr_options &  MSG_EXT_PPR_RTI ? 1 : 0; | 
|  | spi_wr_flow(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_WR_FLOW ? 1 : 0; | 
|  | spi_hold_mcs(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_HOLD_MCS ? 1 : 0; | 
|  | spi_display_xfer_agreement(starget); | 
|  | break; | 
|  | } | 
|  | case AC_SENT_BDR: | 
|  | { | 
|  | WARN_ON(lun != CAM_LUN_WILDCARD); | 
|  | scsi_report_device_reset(ahd->platform_data->host, | 
|  | channel - 'A', target); | 
|  | break; | 
|  | } | 
|  | case AC_BUS_RESET: | 
|  | if (ahd->platform_data->host != NULL) { | 
|  | scsi_report_bus_reset(ahd->platform_data->host, | 
|  | channel - 'A'); | 
|  | } | 
|  | break; | 
|  | default: | 
|  | panic("ahd_send_async: Unexpected async event"); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Calls the higher level scsi done function and frees the scb. | 
|  | */ | 
|  | void | 
|  | ahd_done(struct ahd_softc *ahd, struct scb *scb) | 
|  | { | 
|  | struct scsi_cmnd *cmd; | 
|  | struct	  ahd_linux_device *dev; | 
|  |  | 
|  | if ((scb->flags & SCB_ACTIVE) == 0) { | 
|  | printf("SCB %d done'd twice\n", SCB_GET_TAG(scb)); | 
|  | ahd_dump_card_state(ahd); | 
|  | panic("Stopping for safety"); | 
|  | } | 
|  | LIST_REMOVE(scb, pending_links); | 
|  | cmd = scb->io_ctx; | 
|  | dev = scb->platform_data->dev; | 
|  | dev->active--; | 
|  | dev->openings++; | 
|  | if ((cmd->result & (CAM_DEV_QFRZN << 16)) != 0) { | 
|  | cmd->result &= ~(CAM_DEV_QFRZN << 16); | 
|  | dev->qfrozen--; | 
|  | } | 
|  | ahd_linux_unmap_scb(ahd, scb); | 
|  |  | 
|  | /* | 
|  | * Guard against stale sense data. | 
|  | * The Linux mid-layer assumes that sense | 
|  | * was retrieved anytime the first byte of | 
|  | * the sense buffer looks "sane". | 
|  | */ | 
|  | cmd->sense_buffer[0] = 0; | 
|  | if (ahd_get_transaction_status(scb) == CAM_REQ_INPROG) { | 
|  | uint32_t amount_xferred; | 
|  |  | 
|  | amount_xferred = | 
|  | ahd_get_transfer_length(scb) - ahd_get_residual(scb); | 
|  | if ((scb->flags & SCB_TRANSMISSION_ERROR) != 0) { | 
|  | #ifdef AHD_DEBUG | 
|  | if ((ahd_debug & AHD_SHOW_MISC) != 0) { | 
|  | ahd_print_path(ahd, scb); | 
|  | printf("Set CAM_UNCOR_PARITY\n"); | 
|  | } | 
|  | #endif | 
|  | ahd_set_transaction_status(scb, CAM_UNCOR_PARITY); | 
|  | #ifdef AHD_REPORT_UNDERFLOWS | 
|  | /* | 
|  | * This code is disabled by default as some | 
|  | * clients of the SCSI system do not properly | 
|  | * initialize the underflow parameter.  This | 
|  | * results in spurious termination of commands | 
|  | * that complete as expected (e.g. underflow is | 
|  | * allowed as command can return variable amounts | 
|  | * of data. | 
|  | */ | 
|  | } else if (amount_xferred < scb->io_ctx->underflow) { | 
|  | u_int i; | 
|  |  | 
|  | ahd_print_path(ahd, scb); | 
|  | printf("CDB:"); | 
|  | for (i = 0; i < scb->io_ctx->cmd_len; i++) | 
|  | printf(" 0x%x", scb->io_ctx->cmnd[i]); | 
|  | printf("\n"); | 
|  | ahd_print_path(ahd, scb); | 
|  | printf("Saw underflow (%ld of %ld bytes). " | 
|  | "Treated as error\n", | 
|  | ahd_get_residual(scb), | 
|  | ahd_get_transfer_length(scb)); | 
|  | ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR); | 
|  | #endif | 
|  | } else { | 
|  | ahd_set_transaction_status(scb, CAM_REQ_CMP); | 
|  | } | 
|  | } else if (ahd_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) { | 
|  | ahd_linux_handle_scsi_status(ahd, cmd->device, scb); | 
|  | } | 
|  |  | 
|  | if (dev->openings == 1 | 
|  | && ahd_get_transaction_status(scb) == CAM_REQ_CMP | 
|  | && ahd_get_scsi_status(scb) != SCSI_STATUS_QUEUE_FULL) | 
|  | dev->tag_success_count++; | 
|  | /* | 
|  | * Some devices deal with temporary internal resource | 
|  | * shortages by returning queue full.  When the queue | 
|  | * full occurrs, we throttle back.  Slowly try to get | 
|  | * back to our previous queue depth. | 
|  | */ | 
|  | if ((dev->openings + dev->active) < dev->maxtags | 
|  | && dev->tag_success_count > AHD_TAG_SUCCESS_INTERVAL) { | 
|  | dev->tag_success_count = 0; | 
|  | dev->openings++; | 
|  | } | 
|  |  | 
|  | if (dev->active == 0) | 
|  | dev->commands_since_idle_or_otag = 0; | 
|  |  | 
|  | if ((scb->flags & SCB_RECOVERY_SCB) != 0) { | 
|  | printf("Recovery SCB completes\n"); | 
|  | if (ahd_get_transaction_status(scb) == CAM_BDR_SENT | 
|  | || ahd_get_transaction_status(scb) == CAM_REQ_ABORTED) | 
|  | ahd_set_transaction_status(scb, CAM_CMD_TIMEOUT); | 
|  |  | 
|  | if (ahd->platform_data->eh_done) | 
|  | complete(ahd->platform_data->eh_done); | 
|  | } | 
|  |  | 
|  | ahd_free_scb(ahd, scb); | 
|  | ahd_linux_queue_cmd_complete(ahd, cmd); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ahd_linux_handle_scsi_status(struct ahd_softc *ahd, | 
|  | struct scsi_device *sdev, struct scb *scb) | 
|  | { | 
|  | struct	ahd_devinfo devinfo; | 
|  | struct ahd_linux_device *dev = scsi_transport_device_data(sdev); | 
|  |  | 
|  | ahd_compile_devinfo(&devinfo, | 
|  | ahd->our_id, | 
|  | sdev->sdev_target->id, sdev->lun, | 
|  | sdev->sdev_target->channel == 0 ? 'A' : 'B', | 
|  | ROLE_INITIATOR); | 
|  |  | 
|  | /* | 
|  | * We don't currently trust the mid-layer to | 
|  | * properly deal with queue full or busy.  So, | 
|  | * when one occurs, we tell the mid-layer to | 
|  | * unconditionally requeue the command to us | 
|  | * so that we can retry it ourselves.  We also | 
|  | * implement our own throttling mechanism so | 
|  | * we don't clobber the device with too many | 
|  | * commands. | 
|  | */ | 
|  | switch (ahd_get_scsi_status(scb)) { | 
|  | default: | 
|  | break; | 
|  | case SCSI_STATUS_CHECK_COND: | 
|  | case SCSI_STATUS_CMD_TERMINATED: | 
|  | { | 
|  | struct scsi_cmnd *cmd; | 
|  |  | 
|  | /* | 
|  | * Copy sense information to the OS's cmd | 
|  | * structure if it is available. | 
|  | */ | 
|  | cmd = scb->io_ctx; | 
|  | if ((scb->flags & (SCB_SENSE|SCB_PKT_SENSE)) != 0) { | 
|  | struct scsi_status_iu_header *siu; | 
|  | u_int sense_size; | 
|  | u_int sense_offset; | 
|  |  | 
|  | if (scb->flags & SCB_SENSE) { | 
|  | sense_size = min(sizeof(struct scsi_sense_data) | 
|  | - ahd_get_sense_residual(scb), | 
|  | (u_long)SCSI_SENSE_BUFFERSIZE); | 
|  | sense_offset = 0; | 
|  | } else { | 
|  | /* | 
|  | * Copy only the sense data into the provided | 
|  | * buffer. | 
|  | */ | 
|  | siu = (struct scsi_status_iu_header *) | 
|  | scb->sense_data; | 
|  | sense_size = min_t(size_t, | 
|  | scsi_4btoul(siu->sense_length), | 
|  | SCSI_SENSE_BUFFERSIZE); | 
|  | sense_offset = SIU_SENSE_OFFSET(siu); | 
|  | } | 
|  |  | 
|  | memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); | 
|  | memcpy(cmd->sense_buffer, | 
|  | ahd_get_sense_buf(ahd, scb) | 
|  | + sense_offset, sense_size); | 
|  | cmd->result |= (DRIVER_SENSE << 24); | 
|  |  | 
|  | #ifdef AHD_DEBUG | 
|  | if (ahd_debug & AHD_SHOW_SENSE) { | 
|  | int i; | 
|  |  | 
|  | printf("Copied %d bytes of sense data at %d:", | 
|  | sense_size, sense_offset); | 
|  | for (i = 0; i < sense_size; i++) { | 
|  | if ((i & 0xF) == 0) | 
|  | printf("\n"); | 
|  | printf("0x%x ", cmd->sense_buffer[i]); | 
|  | } | 
|  | printf("\n"); | 
|  | } | 
|  | #endif | 
|  | } | 
|  | break; | 
|  | } | 
|  | case SCSI_STATUS_QUEUE_FULL: | 
|  | /* | 
|  | * By the time the core driver has returned this | 
|  | * command, all other commands that were queued | 
|  | * to us but not the device have been returned. | 
|  | * This ensures that dev->active is equal to | 
|  | * the number of commands actually queued to | 
|  | * the device. | 
|  | */ | 
|  | dev->tag_success_count = 0; | 
|  | if (dev->active != 0) { | 
|  | /* | 
|  | * Drop our opening count to the number | 
|  | * of commands currently outstanding. | 
|  | */ | 
|  | dev->openings = 0; | 
|  | #ifdef AHD_DEBUG | 
|  | if ((ahd_debug & AHD_SHOW_QFULL) != 0) { | 
|  | ahd_print_path(ahd, scb); | 
|  | printf("Dropping tag count to %d\n", | 
|  | dev->active); | 
|  | } | 
|  | #endif | 
|  | if (dev->active == dev->tags_on_last_queuefull) { | 
|  |  | 
|  | dev->last_queuefull_same_count++; | 
|  | /* | 
|  | * If we repeatedly see a queue full | 
|  | * at the same queue depth, this | 
|  | * device has a fixed number of tag | 
|  | * slots.  Lock in this tag depth | 
|  | * so we stop seeing queue fulls from | 
|  | * this device. | 
|  | */ | 
|  | if (dev->last_queuefull_same_count | 
|  | == AHD_LOCK_TAGS_COUNT) { | 
|  | dev->maxtags = dev->active; | 
|  | ahd_print_path(ahd, scb); | 
|  | printf("Locking max tag count at %d\n", | 
|  | dev->active); | 
|  | } | 
|  | } else { | 
|  | dev->tags_on_last_queuefull = dev->active; | 
|  | dev->last_queuefull_same_count = 0; | 
|  | } | 
|  | ahd_set_transaction_status(scb, CAM_REQUEUE_REQ); | 
|  | ahd_set_scsi_status(scb, SCSI_STATUS_OK); | 
|  | ahd_platform_set_tags(ahd, sdev, &devinfo, | 
|  | (dev->flags & AHD_DEV_Q_BASIC) | 
|  | ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED); | 
|  | break; | 
|  | } | 
|  | /* | 
|  | * Drop down to a single opening, and treat this | 
|  | * as if the target returned BUSY SCSI status. | 
|  | */ | 
|  | dev->openings = 1; | 
|  | ahd_platform_set_tags(ahd, sdev, &devinfo, | 
|  | (dev->flags & AHD_DEV_Q_BASIC) | 
|  | ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED); | 
|  | ahd_set_scsi_status(scb, SCSI_STATUS_BUSY); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd) | 
|  | { | 
|  | int status; | 
|  | int new_status = DID_OK; | 
|  | int do_fallback = 0; | 
|  | int scsi_status; | 
|  |  | 
|  | /* | 
|  | * Map CAM error codes into Linux Error codes.  We | 
|  | * avoid the conversion so that the DV code has the | 
|  | * full error information available when making | 
|  | * state change decisions. | 
|  | */ | 
|  |  | 
|  | status = ahd_cmd_get_transaction_status(cmd); | 
|  | switch (status) { | 
|  | case CAM_REQ_INPROG: | 
|  | case CAM_REQ_CMP: | 
|  | new_status = DID_OK; | 
|  | break; | 
|  | case CAM_AUTOSENSE_FAIL: | 
|  | new_status = DID_ERROR; | 
|  | /* Fallthrough */ | 
|  | case CAM_SCSI_STATUS_ERROR: | 
|  | scsi_status = ahd_cmd_get_scsi_status(cmd); | 
|  |  | 
|  | switch(scsi_status) { | 
|  | case SCSI_STATUS_CMD_TERMINATED: | 
|  | case SCSI_STATUS_CHECK_COND: | 
|  | if ((cmd->result >> 24) != DRIVER_SENSE) { | 
|  | do_fallback = 1; | 
|  | } else { | 
|  | struct scsi_sense_data *sense; | 
|  |  | 
|  | sense = (struct scsi_sense_data *) | 
|  | cmd->sense_buffer; | 
|  | if (sense->extra_len >= 5 && | 
|  | (sense->add_sense_code == 0x47 | 
|  | || sense->add_sense_code == 0x48)) | 
|  | do_fallback = 1; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case CAM_REQ_ABORTED: | 
|  | new_status = DID_ABORT; | 
|  | break; | 
|  | case CAM_BUSY: | 
|  | new_status = DID_BUS_BUSY; | 
|  | break; | 
|  | case CAM_REQ_INVALID: | 
|  | case CAM_PATH_INVALID: | 
|  | new_status = DID_BAD_TARGET; | 
|  | break; | 
|  | case CAM_SEL_TIMEOUT: | 
|  | new_status = DID_NO_CONNECT; | 
|  | break; | 
|  | case CAM_SCSI_BUS_RESET: | 
|  | case CAM_BDR_SENT: | 
|  | new_status = DID_RESET; | 
|  | break; | 
|  | case CAM_UNCOR_PARITY: | 
|  | new_status = DID_PARITY; | 
|  | do_fallback = 1; | 
|  | break; | 
|  | case CAM_CMD_TIMEOUT: | 
|  | new_status = DID_TIME_OUT; | 
|  | do_fallback = 1; | 
|  | break; | 
|  | case CAM_REQ_CMP_ERR: | 
|  | case CAM_UNEXP_BUSFREE: | 
|  | case CAM_DATA_RUN_ERR: | 
|  | new_status = DID_ERROR; | 
|  | do_fallback = 1; | 
|  | break; | 
|  | case CAM_UA_ABORT: | 
|  | case CAM_NO_HBA: | 
|  | case CAM_SEQUENCE_FAIL: | 
|  | case CAM_CCB_LEN_ERR: | 
|  | case CAM_PROVIDE_FAIL: | 
|  | case CAM_REQ_TERMIO: | 
|  | case CAM_UNREC_HBA_ERROR: | 
|  | case CAM_REQ_TOO_BIG: | 
|  | new_status = DID_ERROR; | 
|  | break; | 
|  | case CAM_REQUEUE_REQ: | 
|  | new_status = DID_REQUEUE; | 
|  | break; | 
|  | default: | 
|  | /* We should never get here */ | 
|  | new_status = DID_ERROR; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (do_fallback) { | 
|  | printf("%s: device overrun (status %x) on %d:%d:%d\n", | 
|  | ahd_name(ahd), status, cmd->device->channel, | 
|  | cmd->device->id, cmd->device->lun); | 
|  | } | 
|  |  | 
|  | ahd_cmd_set_transaction_status(cmd, new_status); | 
|  |  | 
|  | cmd->scsi_done(cmd); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ahd_freeze_simq(struct ahd_softc *ahd) | 
|  | { | 
|  | scsi_block_requests(ahd->platform_data->host); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ahd_release_simq(struct ahd_softc *ahd) | 
|  | { | 
|  | scsi_unblock_requests(ahd->platform_data->host); | 
|  | } | 
|  |  | 
|  | static int | 
|  | ahd_linux_queue_abort_cmd(struct scsi_cmnd *cmd) | 
|  | { | 
|  | struct ahd_softc *ahd; | 
|  | struct ahd_linux_device *dev; | 
|  | struct scb *pending_scb; | 
|  | u_int  saved_scbptr; | 
|  | u_int  active_scbptr; | 
|  | u_int  last_phase; | 
|  | u_int  saved_scsiid; | 
|  | u_int  cdb_byte; | 
|  | int    retval; | 
|  | int    was_paused; | 
|  | int    paused; | 
|  | int    wait; | 
|  | int    disconnected; | 
|  | ahd_mode_state saved_modes; | 
|  | unsigned long flags; | 
|  |  | 
|  | pending_scb = NULL; | 
|  | paused = FALSE; | 
|  | wait = FALSE; | 
|  | ahd = *(struct ahd_softc **)cmd->device->host->hostdata; | 
|  |  | 
|  | scmd_printk(KERN_INFO, cmd, | 
|  | "Attempting to queue an ABORT message:"); | 
|  |  | 
|  | printf("CDB:"); | 
|  | for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++) | 
|  | printf(" 0x%x", cmd->cmnd[cdb_byte]); | 
|  | printf("\n"); | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  |  | 
|  | /* | 
|  | * First determine if we currently own this command. | 
|  | * Start by searching the device queue.  If not found | 
|  | * there, check the pending_scb list.  If not found | 
|  | * at all, and the system wanted us to just abort the | 
|  | * command, return success. | 
|  | */ | 
|  | dev = scsi_transport_device_data(cmd->device); | 
|  |  | 
|  | if (dev == NULL) { | 
|  | /* | 
|  | * No target device for this command exists, | 
|  | * so we must not still own the command. | 
|  | */ | 
|  | scmd_printk(KERN_INFO, cmd, "Is not an active device\n"); | 
|  | retval = SUCCESS; | 
|  | goto no_cmd; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * See if we can find a matching cmd in the pending list. | 
|  | */ | 
|  | LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) { | 
|  | if (pending_scb->io_ctx == cmd) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (pending_scb == NULL) { | 
|  | scmd_printk(KERN_INFO, cmd, "Command not found\n"); | 
|  | goto no_cmd; | 
|  | } | 
|  |  | 
|  | if ((pending_scb->flags & SCB_RECOVERY_SCB) != 0) { | 
|  | /* | 
|  | * We can't queue two recovery actions using the same SCB | 
|  | */ | 
|  | retval = FAILED; | 
|  | goto  done; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Ensure that the card doesn't do anything | 
|  | * behind our back.  Also make sure that we | 
|  | * didn't "just" miss an interrupt that would | 
|  | * affect this cmd. | 
|  | */ | 
|  | was_paused = ahd_is_paused(ahd); | 
|  | ahd_pause_and_flushwork(ahd); | 
|  | paused = TRUE; | 
|  |  | 
|  | if ((pending_scb->flags & SCB_ACTIVE) == 0) { | 
|  | scmd_printk(KERN_INFO, cmd, "Command already completed\n"); | 
|  | goto no_cmd; | 
|  | } | 
|  |  | 
|  | printf("%s: At time of recovery, card was %spaused\n", | 
|  | ahd_name(ahd), was_paused ? "" : "not "); | 
|  | ahd_dump_card_state(ahd); | 
|  |  | 
|  | disconnected = TRUE; | 
|  | if (ahd_search_qinfifo(ahd, cmd->device->id, | 
|  | cmd->device->channel + 'A', | 
|  | cmd->device->lun, | 
|  | pending_scb->hscb->tag, | 
|  | ROLE_INITIATOR, CAM_REQ_ABORTED, | 
|  | SEARCH_COMPLETE) > 0) { | 
|  | printf("%s:%d:%d:%d: Cmd aborted from QINFIFO\n", | 
|  | ahd_name(ahd), cmd->device->channel, | 
|  | cmd->device->id, cmd->device->lun); | 
|  | retval = SUCCESS; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | saved_modes = ahd_save_modes(ahd); | 
|  | ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); | 
|  | last_phase = ahd_inb(ahd, LASTPHASE); | 
|  | saved_scbptr = ahd_get_scbptr(ahd); | 
|  | active_scbptr = saved_scbptr; | 
|  | if (disconnected && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) { | 
|  | struct scb *bus_scb; | 
|  |  | 
|  | bus_scb = ahd_lookup_scb(ahd, active_scbptr); | 
|  | if (bus_scb == pending_scb) | 
|  | disconnected = FALSE; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * At this point, pending_scb is the scb associated with the | 
|  | * passed in command.  That command is currently active on the | 
|  | * bus or is in the disconnected state. | 
|  | */ | 
|  | saved_scsiid = ahd_inb(ahd, SAVED_SCSIID); | 
|  | if (last_phase != P_BUSFREE | 
|  | && SCB_GET_TAG(pending_scb) == active_scbptr) { | 
|  |  | 
|  | /* | 
|  | * We're active on the bus, so assert ATN | 
|  | * and hope that the target responds. | 
|  | */ | 
|  | pending_scb = ahd_lookup_scb(ahd, active_scbptr); | 
|  | pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT; | 
|  | ahd_outb(ahd, MSG_OUT, HOST_MSG); | 
|  | ahd_outb(ahd, SCSISIGO, last_phase|ATNO); | 
|  | scmd_printk(KERN_INFO, cmd, "Device is active, asserting ATN\n"); | 
|  | wait = TRUE; | 
|  | } else if (disconnected) { | 
|  |  | 
|  | /* | 
|  | * Actually re-queue this SCB in an attempt | 
|  | * to select the device before it reconnects. | 
|  | */ | 
|  | pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT; | 
|  | ahd_set_scbptr(ahd, SCB_GET_TAG(pending_scb)); | 
|  | pending_scb->hscb->cdb_len = 0; | 
|  | pending_scb->hscb->task_attribute = 0; | 
|  | pending_scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK; | 
|  |  | 
|  | if ((pending_scb->flags & SCB_PACKETIZED) != 0) { | 
|  | /* | 
|  | * Mark the SCB has having an outstanding | 
|  | * task management function.  Should the command | 
|  | * complete normally before the task management | 
|  | * function can be sent, the host will be notified | 
|  | * to abort our requeued SCB. | 
|  | */ | 
|  | ahd_outb(ahd, SCB_TASK_MANAGEMENT, | 
|  | pending_scb->hscb->task_management); | 
|  | } else { | 
|  | /* | 
|  | * If non-packetized, set the MK_MESSAGE control | 
|  | * bit indicating that we desire to send a message. | 
|  | * We also set the disconnected flag since there is | 
|  | * no guarantee that our SCB control byte matches | 
|  | * the version on the card.  We don't want the | 
|  | * sequencer to abort the command thinking an | 
|  | * unsolicited reselection occurred. | 
|  | */ | 
|  | pending_scb->hscb->control |= MK_MESSAGE|DISCONNECTED; | 
|  |  | 
|  | /* | 
|  | * The sequencer will never re-reference the | 
|  | * in-core SCB.  To make sure we are notified | 
|  | * during reslection, set the MK_MESSAGE flag in | 
|  | * the card's copy of the SCB. | 
|  | */ | 
|  | ahd_outb(ahd, SCB_CONTROL, | 
|  | ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Clear out any entries in the QINFIFO first | 
|  | * so we are the next SCB for this target | 
|  | * to run. | 
|  | */ | 
|  | ahd_search_qinfifo(ahd, cmd->device->id, | 
|  | cmd->device->channel + 'A', cmd->device->lun, | 
|  | SCB_LIST_NULL, ROLE_INITIATOR, | 
|  | CAM_REQUEUE_REQ, SEARCH_COMPLETE); | 
|  | ahd_qinfifo_requeue_tail(ahd, pending_scb); | 
|  | ahd_set_scbptr(ahd, saved_scbptr); | 
|  | ahd_print_path(ahd, pending_scb); | 
|  | printf("Device is disconnected, re-queuing SCB\n"); | 
|  | wait = TRUE; | 
|  | } else { | 
|  | scmd_printk(KERN_INFO, cmd, "Unable to deliver message\n"); | 
|  | retval = FAILED; | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | no_cmd: | 
|  | /* | 
|  | * Our assumption is that if we don't have the command, no | 
|  | * recovery action was required, so we return success.  Again, | 
|  | * the semantics of the mid-layer recovery engine are not | 
|  | * well defined, so this may change in time. | 
|  | */ | 
|  | retval = SUCCESS; | 
|  | done: | 
|  | if (paused) | 
|  | ahd_unpause(ahd); | 
|  | if (wait) { | 
|  | DECLARE_COMPLETION_ONSTACK(done); | 
|  |  | 
|  | ahd->platform_data->eh_done = &done; | 
|  | ahd_unlock(ahd, &flags); | 
|  |  | 
|  | printf("%s: Recovery code sleeping\n", ahd_name(ahd)); | 
|  | if (!wait_for_completion_timeout(&done, 5 * HZ)) { | 
|  | ahd_lock(ahd, &flags); | 
|  | ahd->platform_data->eh_done = NULL; | 
|  | ahd_unlock(ahd, &flags); | 
|  | printf("%s: Timer Expired (active %d)\n", | 
|  | ahd_name(ahd), dev->active); | 
|  | retval = FAILED; | 
|  | } | 
|  | printf("Recovery code awake\n"); | 
|  | } else | 
|  | ahd_unlock(ahd, &flags); | 
|  |  | 
|  | if (retval != SUCCESS) | 
|  | printf("%s: Command abort returning 0x%x\n", | 
|  | ahd_name(ahd), retval); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void ahd_linux_set_width(struct scsi_target *starget, int width) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | 
|  | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | 
|  | struct ahd_devinfo devinfo; | 
|  | unsigned long flags; | 
|  |  | 
|  | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | 
|  | starget->channel + 'A', ROLE_INITIATOR); | 
|  | ahd_lock(ahd, &flags); | 
|  | ahd_set_width(ahd, &devinfo, width, AHD_TRANS_GOAL, FALSE); | 
|  | ahd_unlock(ahd, &flags); | 
|  | } | 
|  |  | 
|  | static void ahd_linux_set_period(struct scsi_target *starget, int period) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | 
|  | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | 
|  | struct ahd_tmode_tstate *tstate; | 
|  | struct ahd_initiator_tinfo *tinfo | 
|  | = ahd_fetch_transinfo(ahd, | 
|  | starget->channel + 'A', | 
|  | shost->this_id, starget->id, &tstate); | 
|  | struct ahd_devinfo devinfo; | 
|  | unsigned int ppr_options = tinfo->goal.ppr_options; | 
|  | unsigned int dt; | 
|  | unsigned long flags; | 
|  | unsigned long offset = tinfo->goal.offset; | 
|  |  | 
|  | #ifdef AHD_DEBUG | 
|  | if ((ahd_debug & AHD_SHOW_DV) != 0) | 
|  | printf("%s: set period to %d\n", ahd_name(ahd), period); | 
|  | #endif | 
|  | if (offset == 0) | 
|  | offset = MAX_OFFSET; | 
|  |  | 
|  | if (period < 8) | 
|  | period = 8; | 
|  | if (period < 10) { | 
|  | if (spi_max_width(starget)) { | 
|  | ppr_options |= MSG_EXT_PPR_DT_REQ; | 
|  | if (period == 8) | 
|  | ppr_options |= MSG_EXT_PPR_IU_REQ; | 
|  | } else | 
|  | period = 10; | 
|  | } | 
|  |  | 
|  | dt = ppr_options & MSG_EXT_PPR_DT_REQ; | 
|  |  | 
|  | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | 
|  | starget->channel + 'A', ROLE_INITIATOR); | 
|  |  | 
|  | /* all PPR requests apart from QAS require wide transfers */ | 
|  | if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) { | 
|  | if (spi_width(starget) == 0) | 
|  | ppr_options &= MSG_EXT_PPR_QAS_REQ; | 
|  | } | 
|  |  | 
|  | ahd_find_syncrate(ahd, &period, &ppr_options, | 
|  | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  | ahd_set_syncrate(ahd, &devinfo, period, offset, | 
|  | ppr_options, AHD_TRANS_GOAL, FALSE); | 
|  | ahd_unlock(ahd, &flags); | 
|  | } | 
|  |  | 
|  | static void ahd_linux_set_offset(struct scsi_target *starget, int offset) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | 
|  | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | 
|  | struct ahd_tmode_tstate *tstate; | 
|  | struct ahd_initiator_tinfo *tinfo | 
|  | = ahd_fetch_transinfo(ahd, | 
|  | starget->channel + 'A', | 
|  | shost->this_id, starget->id, &tstate); | 
|  | struct ahd_devinfo devinfo; | 
|  | unsigned int ppr_options = 0; | 
|  | unsigned int period = 0; | 
|  | unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; | 
|  | unsigned long flags; | 
|  |  | 
|  | #ifdef AHD_DEBUG | 
|  | if ((ahd_debug & AHD_SHOW_DV) != 0) | 
|  | printf("%s: set offset to %d\n", ahd_name(ahd), offset); | 
|  | #endif | 
|  |  | 
|  | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | 
|  | starget->channel + 'A', ROLE_INITIATOR); | 
|  | if (offset != 0) { | 
|  | period = tinfo->goal.period; | 
|  | ppr_options = tinfo->goal.ppr_options; | 
|  | ahd_find_syncrate(ahd, &period, &ppr_options, | 
|  | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | 
|  | } | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  | ahd_set_syncrate(ahd, &devinfo, period, offset, ppr_options, | 
|  | AHD_TRANS_GOAL, FALSE); | 
|  | ahd_unlock(ahd, &flags); | 
|  | } | 
|  |  | 
|  | static void ahd_linux_set_dt(struct scsi_target *starget, int dt) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | 
|  | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | 
|  | struct ahd_tmode_tstate *tstate; | 
|  | struct ahd_initiator_tinfo *tinfo | 
|  | = ahd_fetch_transinfo(ahd, | 
|  | starget->channel + 'A', | 
|  | shost->this_id, starget->id, &tstate); | 
|  | struct ahd_devinfo devinfo; | 
|  | unsigned int ppr_options = tinfo->goal.ppr_options | 
|  | & ~MSG_EXT_PPR_DT_REQ; | 
|  | unsigned int period = tinfo->goal.period; | 
|  | unsigned int width = tinfo->goal.width; | 
|  | unsigned long flags; | 
|  |  | 
|  | #ifdef AHD_DEBUG | 
|  | if ((ahd_debug & AHD_SHOW_DV) != 0) | 
|  | printf("%s: %s DT\n", ahd_name(ahd), | 
|  | dt ? "enabling" : "disabling"); | 
|  | #endif | 
|  | if (dt && spi_max_width(starget)) { | 
|  | ppr_options |= MSG_EXT_PPR_DT_REQ; | 
|  | if (!width) | 
|  | ahd_linux_set_width(starget, 1); | 
|  | } else { | 
|  | if (period <= 9) | 
|  | period = 10; /* If resetting DT, period must be >= 25ns */ | 
|  | /* IU is invalid without DT set */ | 
|  | ppr_options &= ~MSG_EXT_PPR_IU_REQ; | 
|  | } | 
|  | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | 
|  | starget->channel + 'A', ROLE_INITIATOR); | 
|  | ahd_find_syncrate(ahd, &period, &ppr_options, | 
|  | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | 
|  | ppr_options, AHD_TRANS_GOAL, FALSE); | 
|  | ahd_unlock(ahd, &flags); | 
|  | } | 
|  |  | 
|  | static void ahd_linux_set_qas(struct scsi_target *starget, int qas) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | 
|  | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | 
|  | struct ahd_tmode_tstate *tstate; | 
|  | struct ahd_initiator_tinfo *tinfo | 
|  | = ahd_fetch_transinfo(ahd, | 
|  | starget->channel + 'A', | 
|  | shost->this_id, starget->id, &tstate); | 
|  | struct ahd_devinfo devinfo; | 
|  | unsigned int ppr_options = tinfo->goal.ppr_options | 
|  | & ~MSG_EXT_PPR_QAS_REQ; | 
|  | unsigned int period = tinfo->goal.period; | 
|  | unsigned int dt; | 
|  | unsigned long flags; | 
|  |  | 
|  | #ifdef AHD_DEBUG | 
|  | if ((ahd_debug & AHD_SHOW_DV) != 0) | 
|  | printf("%s: %s QAS\n", ahd_name(ahd), | 
|  | qas ? "enabling" : "disabling"); | 
|  | #endif | 
|  |  | 
|  | if (qas) { | 
|  | ppr_options |= MSG_EXT_PPR_QAS_REQ; | 
|  | } | 
|  |  | 
|  | dt = ppr_options & MSG_EXT_PPR_DT_REQ; | 
|  |  | 
|  | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | 
|  | starget->channel + 'A', ROLE_INITIATOR); | 
|  | ahd_find_syncrate(ahd, &period, &ppr_options, | 
|  | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | 
|  | ppr_options, AHD_TRANS_GOAL, FALSE); | 
|  | ahd_unlock(ahd, &flags); | 
|  | } | 
|  |  | 
|  | static void ahd_linux_set_iu(struct scsi_target *starget, int iu) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | 
|  | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | 
|  | struct ahd_tmode_tstate *tstate; | 
|  | struct ahd_initiator_tinfo *tinfo | 
|  | = ahd_fetch_transinfo(ahd, | 
|  | starget->channel + 'A', | 
|  | shost->this_id, starget->id, &tstate); | 
|  | struct ahd_devinfo devinfo; | 
|  | unsigned int ppr_options = tinfo->goal.ppr_options | 
|  | & ~MSG_EXT_PPR_IU_REQ; | 
|  | unsigned int period = tinfo->goal.period; | 
|  | unsigned int dt; | 
|  | unsigned long flags; | 
|  |  | 
|  | #ifdef AHD_DEBUG | 
|  | if ((ahd_debug & AHD_SHOW_DV) != 0) | 
|  | printf("%s: %s IU\n", ahd_name(ahd), | 
|  | iu ? "enabling" : "disabling"); | 
|  | #endif | 
|  |  | 
|  | if (iu && spi_max_width(starget)) { | 
|  | ppr_options |= MSG_EXT_PPR_IU_REQ; | 
|  | ppr_options |= MSG_EXT_PPR_DT_REQ; /* IU requires DT */ | 
|  | } | 
|  |  | 
|  | dt = ppr_options & MSG_EXT_PPR_DT_REQ; | 
|  |  | 
|  | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | 
|  | starget->channel + 'A', ROLE_INITIATOR); | 
|  | ahd_find_syncrate(ahd, &period, &ppr_options, | 
|  | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | 
|  | ppr_options, AHD_TRANS_GOAL, FALSE); | 
|  | ahd_unlock(ahd, &flags); | 
|  | } | 
|  |  | 
|  | static void ahd_linux_set_rd_strm(struct scsi_target *starget, int rdstrm) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | 
|  | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | 
|  | struct ahd_tmode_tstate *tstate; | 
|  | struct ahd_initiator_tinfo *tinfo | 
|  | = ahd_fetch_transinfo(ahd, | 
|  | starget->channel + 'A', | 
|  | shost->this_id, starget->id, &tstate); | 
|  | struct ahd_devinfo devinfo; | 
|  | unsigned int ppr_options = tinfo->goal.ppr_options | 
|  | & ~MSG_EXT_PPR_RD_STRM; | 
|  | unsigned int period = tinfo->goal.period; | 
|  | unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; | 
|  | unsigned long flags; | 
|  |  | 
|  | #ifdef AHD_DEBUG | 
|  | if ((ahd_debug & AHD_SHOW_DV) != 0) | 
|  | printf("%s: %s Read Streaming\n", ahd_name(ahd), | 
|  | rdstrm  ? "enabling" : "disabling"); | 
|  | #endif | 
|  |  | 
|  | if (rdstrm && spi_max_width(starget)) | 
|  | ppr_options |= MSG_EXT_PPR_RD_STRM; | 
|  |  | 
|  | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | 
|  | starget->channel + 'A', ROLE_INITIATOR); | 
|  | ahd_find_syncrate(ahd, &period, &ppr_options, | 
|  | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | 
|  | ppr_options, AHD_TRANS_GOAL, FALSE); | 
|  | ahd_unlock(ahd, &flags); | 
|  | } | 
|  |  | 
|  | static void ahd_linux_set_wr_flow(struct scsi_target *starget, int wrflow) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | 
|  | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | 
|  | struct ahd_tmode_tstate *tstate; | 
|  | struct ahd_initiator_tinfo *tinfo | 
|  | = ahd_fetch_transinfo(ahd, | 
|  | starget->channel + 'A', | 
|  | shost->this_id, starget->id, &tstate); | 
|  | struct ahd_devinfo devinfo; | 
|  | unsigned int ppr_options = tinfo->goal.ppr_options | 
|  | & ~MSG_EXT_PPR_WR_FLOW; | 
|  | unsigned int period = tinfo->goal.period; | 
|  | unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; | 
|  | unsigned long flags; | 
|  |  | 
|  | #ifdef AHD_DEBUG | 
|  | if ((ahd_debug & AHD_SHOW_DV) != 0) | 
|  | printf("%s: %s Write Flow Control\n", ahd_name(ahd), | 
|  | wrflow ? "enabling" : "disabling"); | 
|  | #endif | 
|  |  | 
|  | if (wrflow && spi_max_width(starget)) | 
|  | ppr_options |= MSG_EXT_PPR_WR_FLOW; | 
|  |  | 
|  | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | 
|  | starget->channel + 'A', ROLE_INITIATOR); | 
|  | ahd_find_syncrate(ahd, &period, &ppr_options, | 
|  | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | 
|  | ppr_options, AHD_TRANS_GOAL, FALSE); | 
|  | ahd_unlock(ahd, &flags); | 
|  | } | 
|  |  | 
|  | static void ahd_linux_set_rti(struct scsi_target *starget, int rti) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | 
|  | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | 
|  | struct ahd_tmode_tstate *tstate; | 
|  | struct ahd_initiator_tinfo *tinfo | 
|  | = ahd_fetch_transinfo(ahd, | 
|  | starget->channel + 'A', | 
|  | shost->this_id, starget->id, &tstate); | 
|  | struct ahd_devinfo devinfo; | 
|  | unsigned int ppr_options = tinfo->goal.ppr_options | 
|  | & ~MSG_EXT_PPR_RTI; | 
|  | unsigned int period = tinfo->goal.period; | 
|  | unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; | 
|  | unsigned long flags; | 
|  |  | 
|  | if ((ahd->features & AHD_RTI) == 0) { | 
|  | #ifdef AHD_DEBUG | 
|  | if ((ahd_debug & AHD_SHOW_DV) != 0) | 
|  | printf("%s: RTI not available\n", ahd_name(ahd)); | 
|  | #endif | 
|  | return; | 
|  | } | 
|  |  | 
|  | #ifdef AHD_DEBUG | 
|  | if ((ahd_debug & AHD_SHOW_DV) != 0) | 
|  | printf("%s: %s RTI\n", ahd_name(ahd), | 
|  | rti ? "enabling" : "disabling"); | 
|  | #endif | 
|  |  | 
|  | if (rti && spi_max_width(starget)) | 
|  | ppr_options |= MSG_EXT_PPR_RTI; | 
|  |  | 
|  | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | 
|  | starget->channel + 'A', ROLE_INITIATOR); | 
|  | ahd_find_syncrate(ahd, &period, &ppr_options, | 
|  | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | 
|  | ppr_options, AHD_TRANS_GOAL, FALSE); | 
|  | ahd_unlock(ahd, &flags); | 
|  | } | 
|  |  | 
|  | static void ahd_linux_set_pcomp_en(struct scsi_target *starget, int pcomp) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | 
|  | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | 
|  | struct ahd_tmode_tstate *tstate; | 
|  | struct ahd_initiator_tinfo *tinfo | 
|  | = ahd_fetch_transinfo(ahd, | 
|  | starget->channel + 'A', | 
|  | shost->this_id, starget->id, &tstate); | 
|  | struct ahd_devinfo devinfo; | 
|  | unsigned int ppr_options = tinfo->goal.ppr_options | 
|  | & ~MSG_EXT_PPR_PCOMP_EN; | 
|  | unsigned int period = tinfo->goal.period; | 
|  | unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; | 
|  | unsigned long flags; | 
|  |  | 
|  | #ifdef AHD_DEBUG | 
|  | if ((ahd_debug & AHD_SHOW_DV) != 0) | 
|  | printf("%s: %s Precompensation\n", ahd_name(ahd), | 
|  | pcomp ? "Enable" : "Disable"); | 
|  | #endif | 
|  |  | 
|  | if (pcomp && spi_max_width(starget)) { | 
|  | uint8_t precomp; | 
|  |  | 
|  | if (ahd->unit < ARRAY_SIZE(aic79xx_iocell_info)) { | 
|  | const struct ahd_linux_iocell_opts *iocell_opts; | 
|  |  | 
|  | iocell_opts = &aic79xx_iocell_info[ahd->unit]; | 
|  | precomp = iocell_opts->precomp; | 
|  | } else { | 
|  | precomp = AIC79XX_DEFAULT_PRECOMP; | 
|  | } | 
|  | ppr_options |= MSG_EXT_PPR_PCOMP_EN; | 
|  | AHD_SET_PRECOMP(ahd, precomp); | 
|  | } else { | 
|  | AHD_SET_PRECOMP(ahd, 0); | 
|  | } | 
|  |  | 
|  | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | 
|  | starget->channel + 'A', ROLE_INITIATOR); | 
|  | ahd_find_syncrate(ahd, &period, &ppr_options, | 
|  | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | 
|  | ppr_options, AHD_TRANS_GOAL, FALSE); | 
|  | ahd_unlock(ahd, &flags); | 
|  | } | 
|  |  | 
|  | static void ahd_linux_set_hold_mcs(struct scsi_target *starget, int hold) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); | 
|  | struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata); | 
|  | struct ahd_tmode_tstate *tstate; | 
|  | struct ahd_initiator_tinfo *tinfo | 
|  | = ahd_fetch_transinfo(ahd, | 
|  | starget->channel + 'A', | 
|  | shost->this_id, starget->id, &tstate); | 
|  | struct ahd_devinfo devinfo; | 
|  | unsigned int ppr_options = tinfo->goal.ppr_options | 
|  | & ~MSG_EXT_PPR_HOLD_MCS; | 
|  | unsigned int period = tinfo->goal.period; | 
|  | unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (hold && spi_max_width(starget)) | 
|  | ppr_options |= MSG_EXT_PPR_HOLD_MCS; | 
|  |  | 
|  | ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, | 
|  | starget->channel + 'A', ROLE_INITIATOR); | 
|  | ahd_find_syncrate(ahd, &period, &ppr_options, | 
|  | dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2); | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  | ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset, | 
|  | ppr_options, AHD_TRANS_GOAL, FALSE); | 
|  | ahd_unlock(ahd, &flags); | 
|  | } | 
|  |  | 
|  | static void ahd_linux_get_signalling(struct Scsi_Host *shost) | 
|  | { | 
|  | struct ahd_softc *ahd = *(struct ahd_softc **)shost->hostdata; | 
|  | unsigned long flags; | 
|  | u8 mode; | 
|  |  | 
|  | ahd_lock(ahd, &flags); | 
|  | ahd_pause(ahd); | 
|  | mode = ahd_inb(ahd, SBLKCTL); | 
|  | ahd_unpause(ahd); | 
|  | ahd_unlock(ahd, &flags); | 
|  |  | 
|  | if (mode & ENAB40) | 
|  | spi_signalling(shost) = SPI_SIGNAL_LVD; | 
|  | else if (mode & ENAB20) | 
|  | spi_signalling(shost) = SPI_SIGNAL_SE; | 
|  | else | 
|  | spi_signalling(shost) = SPI_SIGNAL_UNKNOWN; | 
|  | } | 
|  |  | 
|  | static struct spi_function_template ahd_linux_transport_functions = { | 
|  | .set_offset	= ahd_linux_set_offset, | 
|  | .show_offset	= 1, | 
|  | .set_period	= ahd_linux_set_period, | 
|  | .show_period	= 1, | 
|  | .set_width	= ahd_linux_set_width, | 
|  | .show_width	= 1, | 
|  | .set_dt		= ahd_linux_set_dt, | 
|  | .show_dt	= 1, | 
|  | .set_iu		= ahd_linux_set_iu, | 
|  | .show_iu	= 1, | 
|  | .set_qas	= ahd_linux_set_qas, | 
|  | .show_qas	= 1, | 
|  | .set_rd_strm	= ahd_linux_set_rd_strm, | 
|  | .show_rd_strm	= 1, | 
|  | .set_wr_flow	= ahd_linux_set_wr_flow, | 
|  | .show_wr_flow	= 1, | 
|  | .set_rti	= ahd_linux_set_rti, | 
|  | .show_rti	= 1, | 
|  | .set_pcomp_en	= ahd_linux_set_pcomp_en, | 
|  | .show_pcomp_en	= 1, | 
|  | .set_hold_mcs	= ahd_linux_set_hold_mcs, | 
|  | .show_hold_mcs	= 1, | 
|  | .get_signalling = ahd_linux_get_signalling, | 
|  | }; | 
|  |  | 
|  | static int __init | 
|  | ahd_linux_init(void) | 
|  | { | 
|  | int	error = 0; | 
|  |  | 
|  | /* | 
|  | * If we've been passed any parameters, process them now. | 
|  | */ | 
|  | if (aic79xx) | 
|  | aic79xx_setup(aic79xx); | 
|  |  | 
|  | ahd_linux_transport_template = | 
|  | spi_attach_transport(&ahd_linux_transport_functions); | 
|  | if (!ahd_linux_transport_template) | 
|  | return -ENODEV; | 
|  |  | 
|  | scsi_transport_reserve_device(ahd_linux_transport_template, | 
|  | sizeof(struct ahd_linux_device)); | 
|  |  | 
|  | error = ahd_linux_pci_init(); | 
|  | if (error) | 
|  | spi_release_transport(ahd_linux_transport_template); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static void __exit | 
|  | ahd_linux_exit(void) | 
|  | { | 
|  | ahd_linux_pci_exit(); | 
|  | spi_release_transport(ahd_linux_transport_template); | 
|  | } | 
|  |  | 
|  | module_init(ahd_linux_init); | 
|  | module_exit(ahd_linux_exit); |