|  | /* MN10300 Miscellaneous helper routines for kernel decompressor | 
|  | * | 
|  | * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. | 
|  | * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. | 
|  | * Modified by David Howells (dhowells@redhat.com) | 
|  | * - Derived from arch/x86/boot/compressed/misc_32.c | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public Licence | 
|  | * as published by the Free Software Foundation; either version | 
|  | * 2 of the Licence, or (at your option) any later version. | 
|  | */ | 
|  | #include <linux/compiler.h> | 
|  | #include <asm/serial-regs.h> | 
|  | #include "misc.h" | 
|  |  | 
|  | #ifndef CONFIG_GDBSTUB_ON_TTYSx | 
|  | /* display 'Uncompressing Linux... ' messages on ttyS0 or ttyS1 */ | 
|  | #if 1	/* ttyS0 */ | 
|  | #define CYG_DEV_BASE	0xA6FB0000 | 
|  | #else   /* ttyS1 */ | 
|  | #define CYG_DEV_BASE	0xA6FC0000 | 
|  | #endif | 
|  |  | 
|  | #define CYG_DEV_THR	(*((volatile __u8*)(CYG_DEV_BASE + 0x00))) | 
|  | #define CYG_DEV_MCR	(*((volatile __u8*)(CYG_DEV_BASE + 0x10))) | 
|  | #define SIO_MCR_DTR	0x01 | 
|  | #define SIO_MCR_RTS	0x02 | 
|  | #define CYG_DEV_LSR	(*((volatile __u8*)(CYG_DEV_BASE + 0x14))) | 
|  | #define SIO_LSR_THRE	0x20		/* transmitter holding register empty */ | 
|  | #define SIO_LSR_TEMT	0x40		/* transmitter register empty */ | 
|  | #define CYG_DEV_MSR	(*((volatile __u8*)(CYG_DEV_BASE + 0x18))) | 
|  | #define SIO_MSR_CTS	0x10		/* clear to send */ | 
|  | #define SIO_MSR_DSR	0x20		/* data set ready */ | 
|  |  | 
|  | #define LSR_WAIT_FOR(STATE) \ | 
|  | do { while (!(CYG_DEV_LSR & SIO_LSR_##STATE)) {} } while (0) | 
|  | #define FLOWCTL_QUERY(LINE) \ | 
|  | ({ CYG_DEV_MSR & SIO_MSR_##LINE; }) | 
|  | #define FLOWCTL_WAIT_FOR(LINE) \ | 
|  | do { while (!(CYG_DEV_MSR & SIO_MSR_##LINE)) {} } while (0) | 
|  | #define FLOWCTL_CLEAR(LINE) \ | 
|  | do { CYG_DEV_MCR &= ~SIO_MCR_##LINE; } while (0) | 
|  | #define FLOWCTL_SET(LINE) \ | 
|  | do { CYG_DEV_MCR |= SIO_MCR_##LINE; } while (0) | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * gzip declarations | 
|  | */ | 
|  |  | 
|  | #define OF(args)  args | 
|  | #define STATIC static | 
|  |  | 
|  | #undef memset | 
|  | #undef memcpy | 
|  |  | 
|  | static inline void *memset(const void *s, int c, size_t n) | 
|  | { | 
|  | int i; | 
|  | char *ss = (char *) s; | 
|  |  | 
|  | for (i = 0; i < n; i++) | 
|  | ss[i] = c; | 
|  | return (void *)s; | 
|  | } | 
|  |  | 
|  | #define memzero(s, n) memset((s), 0, (n)) | 
|  |  | 
|  | static inline void *memcpy(void *__dest, const void *__src, size_t __n) | 
|  | { | 
|  | int i; | 
|  | const char *s = __src; | 
|  | char *d = __dest; | 
|  |  | 
|  | for (i = 0; i < __n; i++) | 
|  | d[i] = s[i]; | 
|  | return __dest; | 
|  | } | 
|  |  | 
|  | typedef unsigned char  uch; | 
|  | typedef unsigned short ush; | 
|  | typedef unsigned long  ulg; | 
|  |  | 
|  | #define WSIZE 0x8000	/* Window size must be at least 32k, and a power of | 
|  | * two */ | 
|  |  | 
|  | static uch *inbuf;	/* input buffer */ | 
|  | static uch window[WSIZE]; /* sliding window buffer */ | 
|  |  | 
|  | static unsigned insize;	/* valid bytes in inbuf */ | 
|  | static unsigned inptr;	/* index of next byte to be processed in inbuf */ | 
|  | static unsigned outcnt;	/* bytes in output buffer */ | 
|  |  | 
|  | /* gzip flag byte */ | 
|  | #define ASCII_FLAG   0x01 /* bit 0 set: file probably ASCII text */ | 
|  | #define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ | 
|  | #define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */ | 
|  | #define ORIG_NAME    0x08 /* bit 3 set: original file name present */ | 
|  | #define COMMENT      0x10 /* bit 4 set: file comment present */ | 
|  | #define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */ | 
|  | #define RESERVED     0xC0 /* bit 6,7:   reserved */ | 
|  |  | 
|  | /* Diagnostic functions */ | 
|  | #ifdef DEBUG | 
|  | #  define Assert(cond, msg) { if (!(cond)) error(msg); } | 
|  | #  define Trace(x)	fprintf x | 
|  | #  define Tracev(x)	{ if (verbose) fprintf x ; } | 
|  | #  define Tracevv(x)	{ if (verbose > 1) fprintf x ; } | 
|  | #  define Tracec(c, x)	{ if (verbose && (c)) fprintf x ; } | 
|  | #  define Tracecv(c, x)	{ if (verbose > 1 && (c)) fprintf x ; } | 
|  | #else | 
|  | #  define Assert(cond, msg) | 
|  | #  define Trace(x) | 
|  | #  define Tracev(x) | 
|  | #  define Tracevv(x) | 
|  | #  define Tracec(c, x) | 
|  | #  define Tracecv(c, x) | 
|  | #endif | 
|  |  | 
|  | static int  fill_inbuf(void); | 
|  | static void flush_window(void); | 
|  | static void error(const char *) __attribute__((noreturn)); | 
|  | static void kputs(const char *); | 
|  |  | 
|  | static inline unsigned char get_byte(void) | 
|  | { | 
|  | unsigned char ch = inptr < insize ? inbuf[inptr++] : fill_inbuf(); | 
|  |  | 
|  | #if 0 | 
|  | char hex[3]; | 
|  | hex[0] = ((ch & 0x0f) > 9) ? | 
|  | ((ch & 0x0f) + 'A' - 0xa) : ((ch & 0x0f) + '0'); | 
|  | hex[1] = ((ch >> 4) > 9) ? | 
|  | ((ch >> 4) + 'A' - 0xa) : ((ch >> 4) + '0'); | 
|  | hex[2] = 0; | 
|  | kputs(hex); | 
|  | #endif | 
|  | return ch; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is set up by the setup-routine at boot-time | 
|  | */ | 
|  | #define EXT_MEM_K (*(unsigned short *)0x90002) | 
|  | #ifndef STANDARD_MEMORY_BIOS_CALL | 
|  | #define ALT_MEM_K (*(unsigned long *) 0x901e0) | 
|  | #endif | 
|  | #define SCREEN_INFO (*(struct screen_info *)0x90000) | 
|  |  | 
|  | static long bytes_out; | 
|  | static uch *output_data; | 
|  | static unsigned long output_ptr; | 
|  |  | 
|  |  | 
|  | static unsigned long free_mem_ptr = (unsigned long) &end; | 
|  | static unsigned long free_mem_end_ptr = (unsigned long) &end + 0x90000; | 
|  |  | 
|  | #define INPLACE_MOVE_ROUTINE	0x1000 | 
|  | #define LOW_BUFFER_START	0x2000 | 
|  | #define LOW_BUFFER_END		0x90000 | 
|  | #define LOW_BUFFER_SIZE		(LOW_BUFFER_END - LOW_BUFFER_START) | 
|  | #define HEAP_SIZE		0x3000 | 
|  | static int high_loaded; | 
|  | static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/; | 
|  |  | 
|  | static char *vidmem = (char *)0xb8000; | 
|  | static int lines, cols; | 
|  |  | 
|  | #define BOOTLOADER_INFLATE | 
|  | #include "../../../../lib/inflate.c" | 
|  |  | 
|  | static inline void scroll(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | memcpy(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2); | 
|  | for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2) | 
|  | vidmem[i] = ' '; | 
|  | } | 
|  |  | 
|  | static inline void kputchar(unsigned char ch) | 
|  | { | 
|  | #ifdef CONFIG_MN10300_UNIT_ASB2305 | 
|  | while (SC0STR & SC01STR_TBF) | 
|  | continue; | 
|  |  | 
|  | if (ch == 0x0a) { | 
|  | SC0TXB = 0x0d; | 
|  | while (SC0STR & SC01STR_TBF) | 
|  | continue; | 
|  | } | 
|  |  | 
|  | SC0TXB = ch; | 
|  |  | 
|  | #else | 
|  | while (SC1STR & SC01STR_TBF) | 
|  | continue; | 
|  |  | 
|  | if (ch == 0x0a) { | 
|  | SC1TXB = 0x0d; | 
|  | while (SC1STR & SC01STR_TBF) | 
|  | continue; | 
|  | } | 
|  |  | 
|  | SC1TXB = ch; | 
|  |  | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static void kputs(const char *s) | 
|  | { | 
|  | #ifdef CONFIG_DEBUG_DECOMPRESS_KERNEL | 
|  | #ifndef CONFIG_GDBSTUB_ON_TTYSx | 
|  | char ch; | 
|  |  | 
|  | FLOWCTL_SET(DTR); | 
|  |  | 
|  | while (*s) { | 
|  | LSR_WAIT_FOR(THRE); | 
|  |  | 
|  | ch = *s++; | 
|  | if (ch == 0x0a) { | 
|  | CYG_DEV_THR = 0x0d; | 
|  | LSR_WAIT_FOR(THRE); | 
|  | } | 
|  | CYG_DEV_THR = ch; | 
|  | } | 
|  |  | 
|  | FLOWCTL_CLEAR(DTR); | 
|  | #else | 
|  |  | 
|  | for (; *s; s++) | 
|  | kputchar(*s); | 
|  |  | 
|  | #endif | 
|  | #endif /* CONFIG_DEBUG_DECOMPRESS_KERNEL */ | 
|  | } | 
|  |  | 
|  | /* =========================================================================== | 
|  | * Fill the input buffer. This is called only when the buffer is empty | 
|  | * and at least one byte is really needed. | 
|  | */ | 
|  | static int fill_inbuf() | 
|  | { | 
|  | if (insize != 0) | 
|  | error("ran out of input data\n"); | 
|  |  | 
|  | inbuf = input_data; | 
|  | insize = input_len; | 
|  | inptr = 1; | 
|  | return inbuf[0]; | 
|  | } | 
|  |  | 
|  | /* =========================================================================== | 
|  | * Write the output window window[0..outcnt-1] and update crc and bytes_out. | 
|  | * (Used for the decompressed data only.) | 
|  | */ | 
|  | static void flush_window_low(void) | 
|  | { | 
|  | ulg c = crc;         /* temporary variable */ | 
|  | unsigned n; | 
|  | uch *in, *out, ch; | 
|  |  | 
|  | in = window; | 
|  | out = &output_data[output_ptr]; | 
|  | for (n = 0; n < outcnt; n++) { | 
|  | ch = *out++ = *in++; | 
|  | c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); | 
|  | } | 
|  | crc = c; | 
|  | bytes_out += (ulg)outcnt; | 
|  | output_ptr += (ulg)outcnt; | 
|  | outcnt = 0; | 
|  | } | 
|  |  | 
|  | static void flush_window_high(void) | 
|  | { | 
|  | ulg c = crc;         /* temporary variable */ | 
|  | unsigned n; | 
|  | uch *in,  ch; | 
|  | in = window; | 
|  | for (n = 0; n < outcnt; n++) { | 
|  | ch = *output_data++ = *in++; | 
|  | if ((ulg) output_data == LOW_BUFFER_END) | 
|  | output_data = high_buffer_start; | 
|  | c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); | 
|  | } | 
|  | crc = c; | 
|  | bytes_out += (ulg)outcnt; | 
|  | outcnt = 0; | 
|  | } | 
|  |  | 
|  | static void flush_window(void) | 
|  | { | 
|  | if (high_loaded) | 
|  | flush_window_high(); | 
|  | else | 
|  | flush_window_low(); | 
|  | } | 
|  |  | 
|  | static void error(const char *x) | 
|  | { | 
|  | kputs("\n\n"); | 
|  | kputs(x); | 
|  | kputs("\n\n -- System halted"); | 
|  |  | 
|  | while (1) | 
|  | /* Halt */; | 
|  | } | 
|  |  | 
|  | #define STACK_SIZE (4096) | 
|  |  | 
|  | long user_stack[STACK_SIZE]; | 
|  |  | 
|  | struct { | 
|  | long *a; | 
|  | short b; | 
|  | } stack_start = { &user_stack[STACK_SIZE], 0 }; | 
|  |  | 
|  | void setup_normal_output_buffer(void) | 
|  | { | 
|  | #ifdef STANDARD_MEMORY_BIOS_CALL | 
|  | if (EXT_MEM_K < 1024) | 
|  | error("Less than 2MB of memory.\n"); | 
|  | #else | 
|  | if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < 1024) | 
|  | error("Less than 2MB of memory.\n"); | 
|  | #endif | 
|  | output_data = (char *) 0x100000; /* Points to 1M */ | 
|  | } | 
|  |  | 
|  | struct moveparams { | 
|  | uch *low_buffer_start; | 
|  | int lcount; | 
|  | uch *high_buffer_start; | 
|  | int hcount; | 
|  | }; | 
|  |  | 
|  | void setup_output_buffer_if_we_run_high(struct moveparams *mv) | 
|  | { | 
|  | high_buffer_start = (uch *)(((ulg) &end) + HEAP_SIZE); | 
|  | #ifdef STANDARD_MEMORY_BIOS_CALL | 
|  | if (EXT_MEM_K < (3 * 1024)) | 
|  | error("Less than 4MB of memory.\n"); | 
|  | #else | 
|  | if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < (3 * 1024)) | 
|  | error("Less than 4MB of memory.\n"); | 
|  | #endif | 
|  | mv->low_buffer_start = output_data = (char *) LOW_BUFFER_START; | 
|  | high_loaded = 1; | 
|  | free_mem_end_ptr = (long) high_buffer_start; | 
|  | if (0x100000 + LOW_BUFFER_SIZE > (ulg) high_buffer_start) { | 
|  | high_buffer_start = (uch *)(0x100000 + LOW_BUFFER_SIZE); | 
|  | mv->hcount = 0; /* say: we need not to move high_buffer */ | 
|  | } else { | 
|  | mv->hcount = -1; | 
|  | } | 
|  | mv->high_buffer_start = high_buffer_start; | 
|  | } | 
|  |  | 
|  | void close_output_buffer_if_we_run_high(struct moveparams *mv) | 
|  | { | 
|  | mv->lcount = bytes_out; | 
|  | if (bytes_out > LOW_BUFFER_SIZE) { | 
|  | mv->lcount = LOW_BUFFER_SIZE; | 
|  | if (mv->hcount) | 
|  | mv->hcount = bytes_out - LOW_BUFFER_SIZE; | 
|  | } else { | 
|  | mv->hcount = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | #undef DEBUGFLAG | 
|  | #ifdef DEBUGFLAG | 
|  | int debugflag; | 
|  | #endif | 
|  |  | 
|  | int decompress_kernel(struct moveparams *mv) | 
|  | { | 
|  | #ifdef DEBUGFLAG | 
|  | while (!debugflag) | 
|  | barrier(); | 
|  | #endif | 
|  |  | 
|  | output_data = (char *) CONFIG_KERNEL_TEXT_ADDRESS; | 
|  |  | 
|  | makecrc(); | 
|  | kputs("Uncompressing Linux... "); | 
|  | gunzip(); | 
|  | kputs("Ok, booting the kernel.\n"); | 
|  | return 0; | 
|  | } |