| /* | 
 |  * arch/alpha/boot/main.c | 
 |  * | 
 |  * Copyright (C) 1994, 1995 Linus Torvalds | 
 |  * | 
 |  * This file is the bootloader for the Linux/AXP kernel | 
 |  */ | 
 | #include <linux/kernel.h> | 
 | #include <linux/string.h> | 
 | #include <linux/utsrelease.h> | 
 | #include <linux/mm.h> | 
 |  | 
 | #include <asm/system.h> | 
 | #include <asm/console.h> | 
 | #include <asm/hwrpb.h> | 
 | #include <asm/pgtable.h> | 
 |  | 
 | #include <stdarg.h> | 
 |  | 
 | #include "ksize.h" | 
 |  | 
 | extern int vsprintf(char *, const char *, va_list); | 
 | extern unsigned long switch_to_osf_pal(unsigned long nr, | 
 | 	struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa, | 
 | 	unsigned long *vptb); | 
 | struct hwrpb_struct *hwrpb = INIT_HWRPB; | 
 | static struct pcb_struct pcb_va[1]; | 
 |  | 
 | /* | 
 |  * Find a physical address of a virtual object.. | 
 |  * | 
 |  * This is easy using the virtual page table address. | 
 |  */ | 
 |  | 
 | static inline void * | 
 | find_pa(unsigned long *vptb, void *ptr) | 
 | { | 
 | 	unsigned long address = (unsigned long) ptr; | 
 | 	unsigned long result; | 
 |  | 
 | 	result = vptb[address >> 13]; | 
 | 	result >>= 32; | 
 | 	result <<= 13; | 
 | 	result |= address & 0x1fff; | 
 | 	return (void *) result; | 
 | }	 | 
 |  | 
 | /* | 
 |  * This function moves into OSF/1 pal-code, and has a temporary | 
 |  * PCB for that. The kernel proper should replace this PCB with | 
 |  * the real one as soon as possible. | 
 |  * | 
 |  * The page table muckery in here depends on the fact that the boot | 
 |  * code has the L1 page table identity-map itself in the second PTE | 
 |  * in the L1 page table. Thus the L1-page is virtually addressable | 
 |  * itself (through three levels) at virtual address 0x200802000. | 
 |  */ | 
 |  | 
 | #define VPTB	((unsigned long *) 0x200000000) | 
 | #define L1	((unsigned long *) 0x200802000) | 
 |  | 
 | void | 
 | pal_init(void) | 
 | { | 
 | 	unsigned long i, rev; | 
 | 	struct percpu_struct * percpu; | 
 | 	struct pcb_struct * pcb_pa; | 
 |  | 
 | 	/* Create the dummy PCB.  */ | 
 | 	pcb_va->ksp = 0; | 
 | 	pcb_va->usp = 0; | 
 | 	pcb_va->ptbr = L1[1] >> 32; | 
 | 	pcb_va->asn = 0; | 
 | 	pcb_va->pcc = 0; | 
 | 	pcb_va->unique = 0; | 
 | 	pcb_va->flags = 1; | 
 | 	pcb_va->res1 = 0; | 
 | 	pcb_va->res2 = 0; | 
 | 	pcb_pa = find_pa(VPTB, pcb_va); | 
 |  | 
 | 	/* | 
 | 	 * a0 = 2 (OSF) | 
 | 	 * a1 = return address, but we give the asm the vaddr of the PCB | 
 | 	 * a2 = physical addr of PCB | 
 | 	 * a3 = new virtual page table pointer | 
 | 	 * a4 = KSP (but the asm sets it) | 
 | 	 */ | 
 | 	srm_printk("Switching to OSF PAL-code .. "); | 
 |  | 
 | 	i = switch_to_osf_pal(2, pcb_va, pcb_pa, VPTB); | 
 | 	if (i) { | 
 | 		srm_printk("failed, code %ld\n", i); | 
 | 		__halt(); | 
 | 	} | 
 |  | 
 | 	percpu = (struct percpu_struct *) | 
 | 		(INIT_HWRPB->processor_offset + (unsigned long) INIT_HWRPB); | 
 | 	rev = percpu->pal_revision = percpu->palcode_avail[2]; | 
 |  | 
 | 	srm_printk("Ok (rev %lx)\n", rev); | 
 |  | 
 | 	tbia(); /* do it directly in case we are SMP */ | 
 | } | 
 |  | 
 | static inline long openboot(void) | 
 | { | 
 | 	char bootdev[256]; | 
 | 	long result; | 
 |  | 
 | 	result = callback_getenv(ENV_BOOTED_DEV, bootdev, 255); | 
 | 	if (result < 0) | 
 | 		return result; | 
 | 	return callback_open(bootdev, result & 255); | 
 | } | 
 |  | 
 | static inline long close(long dev) | 
 | { | 
 | 	return callback_close(dev); | 
 | } | 
 |  | 
 | static inline long load(long dev, unsigned long addr, unsigned long count) | 
 | { | 
 | 	char bootfile[256]; | 
 | 	extern char _end; | 
 | 	long result, boot_size = &_end - (char *) BOOT_ADDR; | 
 |  | 
 | 	result = callback_getenv(ENV_BOOTED_FILE, bootfile, 255); | 
 | 	if (result < 0) | 
 | 		return result; | 
 | 	result &= 255; | 
 | 	bootfile[result] = '\0'; | 
 | 	if (result) | 
 | 		srm_printk("Boot file specification (%s) not implemented\n", | 
 | 		       bootfile); | 
 | 	return callback_read(dev, count, (void *)addr, boot_size/512 + 1); | 
 | } | 
 |  | 
 | /* | 
 |  * Start the kernel. | 
 |  */ | 
 | static void runkernel(void) | 
 | { | 
 | 	__asm__ __volatile__( | 
 | 		"bis %1,%1,$30\n\t" | 
 | 		"bis %0,%0,$26\n\t" | 
 | 		"ret ($26)" | 
 | 		: /* no outputs: it doesn't even return */ | 
 | 		: "r" (START_ADDR), | 
 | 		  "r" (PAGE_SIZE + INIT_STACK)); | 
 | } | 
 |  | 
 | void start_kernel(void) | 
 | { | 
 | 	long i; | 
 | 	long dev; | 
 | 	int nbytes; | 
 | 	char envval[256]; | 
 |  | 
 | 	srm_printk("Linux/AXP bootloader for Linux " UTS_RELEASE "\n"); | 
 | 	if (INIT_HWRPB->pagesize != 8192) { | 
 | 		srm_printk("Expected 8kB pages, got %ldkB\n", INIT_HWRPB->pagesize >> 10); | 
 | 		return; | 
 | 	} | 
 | 	pal_init(); | 
 | 	dev = openboot(); | 
 | 	if (dev < 0) { | 
 | 		srm_printk("Unable to open boot device: %016lx\n", dev); | 
 | 		return; | 
 | 	} | 
 | 	dev &= 0xffffffff; | 
 | 	srm_printk("Loading vmlinux ..."); | 
 | 	i = load(dev, START_ADDR, KERNEL_SIZE); | 
 | 	close(dev); | 
 | 	if (i != KERNEL_SIZE) { | 
 | 		srm_printk("Failed (%lx)\n", i); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	nbytes = callback_getenv(ENV_BOOTED_OSFLAGS, envval, sizeof(envval)); | 
 | 	if (nbytes < 0) { | 
 | 		nbytes = 0; | 
 | 	} | 
 | 	envval[nbytes] = '\0'; | 
 | 	strcpy((char*)ZERO_PGE, envval); | 
 |  | 
 | 	srm_printk(" Ok\nNow booting the kernel\n"); | 
 | 	runkernel(); | 
 | 	for (i = 0 ; i < 0x100000000 ; i++) | 
 | 		/* nothing */; | 
 | 	__halt(); | 
 | } |