| /* |
| * linux/include/asm-arm/arch-pxa/irqs.h |
| * |
| * Author: Nicolas Pitre |
| * Created: Jun 15, 2001 |
| * Copyright: MontaVista Software Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| |
| #define PXA_IRQ(x) (x) |
| |
| #ifdef CONFIG_PXA27x |
| #define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */ |
| #define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */ |
| #define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI) */ |
| #define IRQ_USBH1 PXA_IRQ(3) /* USB Host interrupt 2 (non-OHCI) */ |
| #define IRQ_KEYPAD PXA_IRQ(4) /* Key pad controller */ |
| #define IRQ_MEMSTK PXA_IRQ(5) /* Memory Stick interrupt */ |
| #define IRQ_PWRI2C PXA_IRQ(6) /* Power I2C interrupt */ |
| #endif |
| |
| #define IRQ_HWUART PXA_IRQ(7) /* HWUART Transmit/Receive/Error (PXA26x) */ |
| #define IRQ_OST_4_11 PXA_IRQ(7) /* OS timer 4-11 matches (PXA27x) */ |
| #define IRQ_GPIO0 PXA_IRQ(8) /* GPIO0 Edge Detect */ |
| #define IRQ_GPIO1 PXA_IRQ(9) /* GPIO1 Edge Detect */ |
| #define IRQ_GPIO_2_x PXA_IRQ(10) /* GPIO[2-x] Edge Detect */ |
| #define IRQ_USB PXA_IRQ(11) /* USB Service */ |
| #define IRQ_PMU PXA_IRQ(12) /* Performance Monitoring Unit */ |
| #define IRQ_I2S PXA_IRQ(13) /* I2S Interrupt */ |
| #define IRQ_AC97 PXA_IRQ(14) /* AC97 Interrupt */ |
| #define IRQ_ASSP PXA_IRQ(15) /* Audio SSP Service Request (PXA25x) */ |
| #define IRQ_USIM PXA_IRQ(15) /* Smart Card interface interrupt (PXA27x) */ |
| #define IRQ_NSSP PXA_IRQ(16) /* Network SSP Service Request (PXA25x) */ |
| #define IRQ_SSP2 PXA_IRQ(16) /* SSP2 interrupt (PXA27x) */ |
| #define IRQ_LCD PXA_IRQ(17) /* LCD Controller Service Request */ |
| #define IRQ_I2C PXA_IRQ(18) /* I2C Service Request */ |
| #define IRQ_ICP PXA_IRQ(19) /* ICP Transmit/Receive/Error */ |
| #define IRQ_STUART PXA_IRQ(20) /* STUART Transmit/Receive/Error */ |
| #define IRQ_BTUART PXA_IRQ(21) /* BTUART Transmit/Receive/Error */ |
| #define IRQ_FFUART PXA_IRQ(22) /* FFUART Transmit/Receive/Error*/ |
| #define IRQ_MMC PXA_IRQ(23) /* MMC Status/Error Detection */ |
| #define IRQ_SSP PXA_IRQ(24) /* SSP Service Request */ |
| #define IRQ_DMA PXA_IRQ(25) /* DMA Channel Service Request */ |
| #define IRQ_OST0 PXA_IRQ(26) /* OS Timer match 0 */ |
| #define IRQ_OST1 PXA_IRQ(27) /* OS Timer match 1 */ |
| #define IRQ_OST2 PXA_IRQ(28) /* OS Timer match 2 */ |
| #define IRQ_OST3 PXA_IRQ(29) /* OS Timer match 3 */ |
| #define IRQ_RTC1Hz PXA_IRQ(30) /* RTC HZ Clock Tick */ |
| #define IRQ_RTCAlrm PXA_IRQ(31) /* RTC Alarm */ |
| |
| #ifdef CONFIG_PXA27x |
| #define IRQ_TPM PXA_IRQ(32) /* TPM interrupt */ |
| #define IRQ_CAMERA PXA_IRQ(33) /* Camera Interface */ |
| #endif |
| |
| #define PXA_GPIO_IRQ_BASE (64) |
| #define PXA_GPIO_IRQ_NUM (128) |
| |
| #define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) |
| #define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) |
| |
| #define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE) |
| #define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i)) |
| |
| /* |
| * The next 16 interrupts are for board specific purposes. Since |
| * the kernel can only run on one machine at a time, we can re-use |
| * these. If you need more, increase IRQ_BOARD_END, but keep it |
| * within sensible limits. |
| */ |
| #define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM) |
| #define IRQ_BOARD_END (IRQ_BOARD_START + 16) |
| |
| #define IRQ_SA1111_START (IRQ_BOARD_END) |
| #define IRQ_GPAIN0 (IRQ_BOARD_END + 0) |
| #define IRQ_GPAIN1 (IRQ_BOARD_END + 1) |
| #define IRQ_GPAIN2 (IRQ_BOARD_END + 2) |
| #define IRQ_GPAIN3 (IRQ_BOARD_END + 3) |
| #define IRQ_GPBIN0 (IRQ_BOARD_END + 4) |
| #define IRQ_GPBIN1 (IRQ_BOARD_END + 5) |
| #define IRQ_GPBIN2 (IRQ_BOARD_END + 6) |
| #define IRQ_GPBIN3 (IRQ_BOARD_END + 7) |
| #define IRQ_GPBIN4 (IRQ_BOARD_END + 8) |
| #define IRQ_GPBIN5 (IRQ_BOARD_END + 9) |
| #define IRQ_GPCIN0 (IRQ_BOARD_END + 10) |
| #define IRQ_GPCIN1 (IRQ_BOARD_END + 11) |
| #define IRQ_GPCIN2 (IRQ_BOARD_END + 12) |
| #define IRQ_GPCIN3 (IRQ_BOARD_END + 13) |
| #define IRQ_GPCIN4 (IRQ_BOARD_END + 14) |
| #define IRQ_GPCIN5 (IRQ_BOARD_END + 15) |
| #define IRQ_GPCIN6 (IRQ_BOARD_END + 16) |
| #define IRQ_GPCIN7 (IRQ_BOARD_END + 17) |
| #define IRQ_MSTXINT (IRQ_BOARD_END + 18) |
| #define IRQ_MSRXINT (IRQ_BOARD_END + 19) |
| #define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20) |
| #define IRQ_TPTXINT (IRQ_BOARD_END + 21) |
| #define IRQ_TPRXINT (IRQ_BOARD_END + 22) |
| #define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23) |
| #define SSPXMTINT (IRQ_BOARD_END + 24) |
| #define SSPRCVINT (IRQ_BOARD_END + 25) |
| #define SSPROR (IRQ_BOARD_END + 26) |
| #define AUDXMTDMADONEA (IRQ_BOARD_END + 32) |
| #define AUDRCVDMADONEA (IRQ_BOARD_END + 33) |
| #define AUDXMTDMADONEB (IRQ_BOARD_END + 34) |
| #define AUDRCVDMADONEB (IRQ_BOARD_END + 35) |
| #define AUDTFSR (IRQ_BOARD_END + 36) |
| #define AUDRFSR (IRQ_BOARD_END + 37) |
| #define AUDTUR (IRQ_BOARD_END + 38) |
| #define AUDROR (IRQ_BOARD_END + 39) |
| #define AUDDTS (IRQ_BOARD_END + 40) |
| #define AUDRDD (IRQ_BOARD_END + 41) |
| #define AUDSTO (IRQ_BOARD_END + 42) |
| #define IRQ_USBPWR (IRQ_BOARD_END + 43) |
| #define IRQ_HCIM (IRQ_BOARD_END + 44) |
| #define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45) |
| #define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46) |
| #define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47) |
| #define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48) |
| #define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49) |
| #define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50) |
| #define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51) |
| #define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52) |
| #define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53) |
| #define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54) |
| |
| #define IRQ_LOCOMO_START (IRQ_BOARD_END) |
| #define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0) |
| #define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1) |
| #define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2) |
| #define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3) |
| #define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4) |
| #define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5) |
| #define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6) |
| #define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7) |
| #define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8) |
| #define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9) |
| #define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10) |
| #define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11) |
| #define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12) |
| #define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13) |
| #define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14) |
| #define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15) |
| #define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16) |
| #define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17) |
| #define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18) |
| #define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19) |
| #define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20) |
| #define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21) |
| |
| /* |
| * Figure out the MAX IRQ number. |
| * |
| * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. |
| * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1 |
| * Otherwise, we have the standard IRQs only. |
| */ |
| #ifdef CONFIG_SA1111 |
| #define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) |
| #elif defined(CONFIG_SHARP_LOCOMO) |
| #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) |
| #elif defined(CONFIG_ARCH_LUBBOCK) || \ |
| defined(CONFIG_MACH_LOGICPD_PXA270) || \ |
| defined(CONFIG_MACH_MAINSTONE) |
| #define NR_IRQS (IRQ_BOARD_END) |
| #else |
| #define NR_IRQS (IRQ_BOARD_START) |
| #endif |
| |
| /* |
| * Board specific IRQs. Define them here. |
| * Do not surround them with ifdefs. |
| */ |
| #define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x)) |
| #define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0) |
| #define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1) |
| #define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */ |
| #define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3) |
| #define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4) |
| #define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5) |
| #define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */ |
| #define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) |
| |
| #define LPD270_IRQ(x) (IRQ_BOARD_START + (x)) |
| #define LPD270_USBC_IRQ LPD270_IRQ(2) |
| #define LPD270_ETHERNET_IRQ LPD270_IRQ(3) |
| #define LPD270_AC97_IRQ LPD270_IRQ(4) |
| |
| #define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x)) |
| #define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0) |
| #define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1) |
| #define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2) |
| #define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3) |
| #define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4) |
| #define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5) |
| #define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6) |
| #define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7) |
| #define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9) |
| #define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10) |
| #define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11) |
| #define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13) |
| #define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14) |
| #define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15) |
| |
| /* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */ |
| #define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0) |
| #define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) |
| #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) |
| #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) |
| |
| /* ITE8152 irqs */ |
| /* add IT8152 IRQs beyond BOARD_END */ |
| #ifdef CONFIG_PCI_HOST_ITE8152 |
| #define IT8152_IRQ(x) (IRQ_GPIO(IRQ_BOARD_END) + 1 + (x)) |
| |
| /* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ |
| #define IT8152_LD_IRQ_COUNT 9 |
| #define IT8152_LP_IRQ_COUNT 16 |
| #define IT8152_PD_IRQ_COUNT 15 |
| |
| /* Priorities: */ |
| #define IT8152_PD_IRQ(i) IT8152_IRQ(i) |
| #define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT) |
| #define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT) |
| |
| #define IT8152_LAST_IRQ IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1) |
| |
| #undef NR_IRQS |
| #define NR_IRQS (IT8152_LAST_IRQ+1) |
| #endif |