ARM: SAMSUNG: Remove uart irq handling from plaform code
With uart tx/rx/err interrupt handling moved into the driver for s3c64xx
and later SoC's, the uart interrupt handling in plaform code can be removed.
The uart device irq resources is reduced to one and the related unused
macros are removed.
Suggested-by: Grant Likely <grant.likely@secretlab.ca>
CC: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index afaf87f..c9308db 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -32,20 +32,10 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX0,
- .end = IRQ_S5P_UART_RX0,
+ .start = IRQ_UART0,
+ .end = IRQ_UART0,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- .start = IRQ_S5P_UART_TX0,
- .end = IRQ_S5P_UART_TX0,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR0,
- .end = IRQ_S5P_UART_ERR0,
- .flags = IORESOURCE_IRQ,
- }
};
static struct resource s5p_uart1_resource[] = {
@@ -55,18 +45,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX1,
- .end = IRQ_S5P_UART_RX1,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX1,
- .end = IRQ_S5P_UART_TX1,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR1,
- .end = IRQ_S5P_UART_ERR1,
+ .start = IRQ_UART1,
+ .end = IRQ_UART1,
.flags = IORESOURCE_IRQ,
},
};
@@ -78,18 +58,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX2,
- .end = IRQ_S5P_UART_RX2,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX2,
- .end = IRQ_S5P_UART_TX2,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR2,
- .end = IRQ_S5P_UART_ERR2,
+ .start = IRQ_UART2,
+ .end = IRQ_UART2,
.flags = IORESOURCE_IRQ,
},
};
@@ -102,18 +72,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX3,
- .end = IRQ_S5P_UART_RX3,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX3,
- .end = IRQ_S5P_UART_TX3,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR3,
- .end = IRQ_S5P_UART_ERR3,
+ .start = IRQ_UART3,
+ .end = IRQ_UART3,
.flags = IORESOURCE_IRQ,
},
#endif
@@ -127,18 +87,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX4,
- .end = IRQ_S5P_UART_RX4,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX4,
- .end = IRQ_S5P_UART_TX4,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR4,
- .end = IRQ_S5P_UART_ERR4,
+ .start = IRQ_UART4,
+ .end = IRQ_UART4,
.flags = IORESOURCE_IRQ,
},
#endif
@@ -152,18 +102,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_S5P_UART_RX5,
- .end = IRQ_S5P_UART_RX5,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_S5P_UART_TX5,
- .end = IRQ_S5P_UART_TX5,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_S5P_UART_ERR5,
- .end = IRQ_S5P_UART_ERR5,
+ .start = IRQ_UART5,
+ .end = IRQ_UART5,
.flags = IORESOURCE_IRQ,
},
#endif