diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index f8cc3f8..c64e969 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -208,7 +208,7 @@
 Cross-Reference project, which is able to present source code in a
 self-referential, indexed webpage format. An excellent up-to-date
 repository of the kernel code may be found at:
-	http://sosdg.org/~coywolf/lxr/
+	http://users.sosdg.org/~qiyong/lxr/
 
 
 The development process
@@ -384,7 +384,7 @@
 bugs reported by other people. Not only you will help to make the kernel
 more stable, you'll learn to fix real world problems and you will improve
 your skills, and other developers will be aware of your presence. Fixing
-bugs is one of the best ways to earn merit amongst the developers, because
+bugs is one of the best ways to get merits among other developers, because
 not many people like wasting time fixing other people's bugs.
 
 To work in the already reported bug reports, go to http://bugzilla.kernel.org.
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index d6b45a9..3975758 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -560,7 +560,7 @@
   <http://marc.theaimsgroup.com/?l=linux-kernel&m=112112749912944&w=2>
 
 Kernel Documentation/CodingStyle:
-  <http://sosdg.org/~coywolf/lxr/source/Documentation/CodingStyle>
+  <http://users.sosdg.org/~qiyong/lxr/source/Documentation/CodingStyle>
 
 Linus Torvalds's mail on the canonical patch format:
   <http://lkml.org/lkml/2005/4/7/183>
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index 24c5aad..cbee3a2 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -196,7 +196,7 @@
 	       "IO    %15s%15s\n"
 	       "      %15llu%15llu\n"
 	       "MEM   %15s%15s\n"
-	       "      %15llu%15llu\n"
+	       "      %15llu%15llu\n",
 	       "count", "real total", "virtual total", "delay total",
 	       t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
 	       t->cpu_delay_total,
diff --git a/Documentation/ko_KR/HOWTO b/Documentation/ko_KR/HOWTO
new file mode 100644
index 0000000..b51d7ca
--- /dev/null
+++ b/Documentation/ko_KR/HOWTO
@@ -0,0 +1,623 @@
+NOTE:
+This is a version of Documentation/HOWTO translated into korean
+This document is maintained by minchan Kim < minchan.kim@gmail.com>
+If you find any difference between this document and the original file or
+a problem with the translation, please contact the maintainer of this file.
+
+Please also note that the purpose of this file is to be easier to
+read for non English (read: korean) speakers and is not intended as
+a fork. So if you have any comments or updates for this file please
+try to update the original English file first.
+
+==================================
+이 문서는
+Documentation/HOWTO
+의 한글 번역입니다.
+
+역자： 김민찬 <minchan.kim@gmail.com >
+감수： 이제이미 <jamee.lee@samsung.com>
+==================================
+
+어떻게 리눅스 커널 개발을 하는가
+---------------------------------
+
+이 문서는 커널 개발에 있어 가장 중요한 문서이다. 이 문서는
+리눅스 커널 개발자가 되는 법과 리눅스 커널 개발 커뮤니티와 일하는
+법을 담고있다. 커널 프로그래밍의기술적인 측면과 관련된 내용들은
+포함하지 않으려고 하였지만 올바으로 여러분을 안내하는 데 도움이
+될 것이다.
+
+이 문서에서 오래된 것을 발견하면 문서의 아래쪽에 나열된 메인트너에게
+패치를 보내달라.
+
+
+소개
+----
+
+자, 여러분은 리눅스 커널 개발자가 되는 법을 배우고 싶은가? 아니면
+상사로부터"이 장치를 위한 리눅스 드라이버를 작성하시오"라는 말을
+들었는가? 이 문서는 여러분이 겪게 될 과정과 커뮤니티와 일하는 법을
+조언하여 여러분의 목적을 달성하기 위해 필요한 것 모두를 알려주는
+것이다.
+
+커널은 대부분은 C로 작성되었어고 몇몇 아키텍쳐의 의존적인 부분은
+어셈블리로 작성되었다. 커널 개발을 위해 C를 잘 이해하고 있어야 한다.
+여러분이 특정 아키텍쳐의 low-level 개발을 할 것이 아니라면
+어셈블리(특정 아키텍쳐)는 잘 알아야 할 필요는 없다.
+다음의 참고서적들은 기본에 충실한 C 교육이나 수년간의 경험에 견주지는
+못하지만 적어도 참고 용도로는 좋을 것이다
+ - "The C Programming Language" by Kernighan and Ritchie [Prentice Hall]
+ - "Practical C Programming" by Steve Oualline [O'Reilly]
+ - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
+
+커널은 GNU C와 GNU 툴체인을 사용하여 작성되었다. 이 툴들은 ISO C89 표준을
+따르는 반면 표준에 있지 않은 많은 확장기능도 가지고 있다. 커널은 표준 C
+라이브러리와는 관계없이 freestanding C 환경이어서 C 표준의 일부는
+지원되지 않는다. 임의의 long long 나누기나 floating point는 지원되지 않는다.
+때론 이런 이유로 커널이 그런 확장 기능을 가진 툴체인을 가지고 만들어졌다는
+것이 이해하기 어려울 수도 있고 게다가 불행하게도 그런 것을 정확하게 설명하는
+어떤 참고문서도 있지 않다. 정보를 얻기 위해서는 gcc info (`info gcc`)페이지를
+살펴보라.
+
+여러분은 기존의 개발 커뮤니티와 일하는 법을 배우려고 하고 있다는 것을
+기억하라. 코딩, 스타일, 절차에 관한 훌륭한 표준을 가진 사람들이 모인
+다양한 그룹이 있다. 이 표준들은 오랜동안 크고 지역적으로 분산된 팀들에
+의해 가장 좋은 방법으로 일하기위하여 찾은 것을 기초로 만들어져왔다.
+그 표준들은 문서화가 잘 되어 있기 때문에 가능한한 미리 많은 표준들에
+관하여 배우려고 시도하라. 다른 사람들은 여러분이나 여러분의 회사가
+일하는 방식에 적응하는 것을 원하지는 않는다.
+
+
+법적 문제
+---------
+
+리눅스 커널 소스 코드는 GPL로 배포(release)되었다. 소스트리의 메인
+디렉토리에 있는 라이센스에 관하여 상세하게 쓰여 있는 COPYING이라는
+파일을 봐라.여러분이 라이센스에 관한 더 깊은 문제를 가지고 있다면
+리눅스 커널 메일링 리스트에 묻지말고 변호사와 연락하라. 메일링
+리스트들에 있는 사람들은 변호사가 아니기 때문에 법적 문제에 관하여
+그들의 말에 의지해서는 안된다.
+
+GPL에 관한 잦은 질문들과 답변들은 다음을 참조하라.
+    http://www.gnu.org/licenses/gpl-faq.html
+
+
+문서
+----
+
+리눅스 커널 소스 트리는 커널 커뮤니티와 일하는 법을 배우기 위한 많은
+귀중한 문서들을 가지고 있다. 새로운 기능들이 커널에 들어가게 될 때,
+그 기능을 어떻게 사용하는지에 관한 설명을 위하여 새로운 문서 파일을
+추가하는 것을 권장한다. 커널이 유저스페이스로 노출하는 인터페이스를
+변경하게 되면 변경을 설명하는 메뉴얼 페이지들에 대한 패치나 정보를
+mtk-manpages@gmx.net의 메인트너에게 보낼 것을 권장한다.
+
+다음은 커널 소스 트리에 있는 읽어야 할 파일들의 리스트이다.
+  README
+    이 파일은 리눅스 커널에 관하여 간단한 배경 설명과 커널을 설정하고
+    빌드하기 위해 필요한 것을 설명한다. 커널에 입문하는 사람들은 여기서
+    시작해야 한다.
+
+  Documentation/Changes
+    이 파일은 커널을 성공적으로 빌드하고 실행시키기 위해 필요한 다양한
+    소프트웨어 패키지들의 최소 버젼을 나열한다.
+
+  Documentation/CodingStyle
+    이 문서는 리눅스 커널 코딩 스타일과 그렇게 한 몇몇 이유를 설명한다.
+    모든 새로운 코드는 이 문서에 가이드라인들을 따라야 한다. 대부분의
+    메인트너들은 이 규칙을 따르는 패치들만을 받아들일 것이고 많은 사람들이
+    그 패치가 올바른 스타일일 경우만 코드를 검토할 것이다.
+
+  Documentation/SubmittingPatches
+  Documentation/SubmittingDrivers
+    이 파일들은 성공적으로 패치를 만들고 보내는 법을 다음의 내용들로
+    굉장히 상세히 설명하고 있다(그러나 다음으로 한정되진 않는다).
+       - Email 내용들
+       - Email 양식
+       - 그것을 누구에게 보낼지
+    이러한 규칙들을 따르는 것이 성공을 보장하진 않는다(왜냐하면 모든
+    패치들은 내용과 스타일에 관하여 면밀히 검토되기 때문이다).
+    그러나 규칙을 따르지 않는다면 거의 성공하지도 못할 것이다.
+
+    올바른 패치들을 만드는 법에 관한 훌륭한 다른 문서들이 있다.
+    "The Perfect Patch"
+        http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+    "Linux kernel patch submission format"
+        http://linux.yyz.us/patch-format.html
+
+   Documentation/stable_api_nonsense.txt
+    이 문서는 의도적으로 커널이 변하지 않는 API를 갖지 않도록 결정한
+    이유를 설명하며 다음과 같은 것들을 포함한다.
+       - 서브시스템 shim-layer(호환성을 위해?)
+       - 운영 체제들 간의 드라이버 이식성
+       - 커널 소스 트리내에 빠른 변화를 늦추는 것(또는 빠른 변화를 막는 것)
+    이 문서는 리눅스 개발 철학을 이해하는데 필수적이며 다른 운영체제에서
+    리눅스로 옮겨오는 사람들에게는 매우 중요하다.
+
+
+  Documentation/SecurityBugs
+    여러분들이 리눅스 커널의 보안 문제를 발견했다고 생각한다면 이 문서에
+    나온 단계에 따라서 커널 개발자들에게 알리고 그 문제를 해결할 수 있도록
+    도와 달라.
+
+  Documentation/ManagementStyle
+    이 문서는 리눅스 커널 메인트너들이 어떻게 그들의 방법론의 정신을
+    어떻게 공유하고 운영하는지를 설명한다. 이것은 커널 개발에 입문하는
+    모든 사람들(또는 커널 개발에 작은 호기심이라도 있는 사람들)이
+    읽어야 할 중요한 문서이다. 왜냐하면 이 문서는 커널 메인트너들의
+    독특한 행동에 관하여 흔히 있는 오해들과 혼란들을 해소하고 있기
+    때문이다.
+
+  Documentation/stable_kernel_rules.txt
+    이 문서는 안정적인 커널 배포가 이루어지는 규칙을 설명하고 있으며
+    여러분들이 이러한 배포들 중 하나에 변경을 하길 원한다면
+    무엇을 해야 하는지를 설명한다.
+
+  Documentation/kernel-docs.txt
+    커널 개발에 관계된 외부 문서의 리스트이다. 커널 내의 포함된 문서들
+    중에 여러분이 찾고 싶은 문서를 발견하지 못할 경우 이 리스트를
+    살펴보라.
+
+  Documentation/applying-patches.txt
+    패치가 무엇이며 그것을 커널의 다른 개발 브랜치들에 어떻게
+    적용하는지에 관하여 자세히 설명 하고 있는 좋은 입문서이다.
+
+커널은 소스 코드 그 자체에서 자동적으로 만들어질 수 있는 많은 문서들을
+가지고 있다. 이것은 커널 내의 API에 대한 모든 설명, 그리고 락킹을
+올바르게 처리하는 법에 관한 규칙을 포함하고 있다. 이 문서는
+Documentation/DocBook/ 디렉토리 내에서 만들어지며 PDF, Postscript, HTML,
+그리고 man 페이지들로 다음과 같이 실행하여 만들어 진다.
+         make pdfdocs
+         make psdocs
+         make htmldocs
+         make mandocs
+각각의 명령을 메인 커널 소스 디렉토리로부터 실행한다.
+
+
+커널 개발자가 되는 것
+---------------------
+
+여러분이 리눅스 커널 개발에 관하여 아무것도 모른다면 Linux KernelNewbies
+프로젝트를 봐야 한다.
+    http://kernelnewbies.org
+그곳은 거의 모든 종류의 기본적인 커널 개발 질문들(질문하기 전에 먼저
+아카이브를 찾아봐라. 과거에 이미 답변되었을 수도 있다)을 할수있는 도움이
+될만한 메일링 리스트가 있다. 또한 실시간으로 질문 할수 있는 IRC 채널도
+가지고 있으며 리눅스 커널 개발을 배우는 데 유용한 문서들을 보유하고 있다.
+
+웹사이트는 코드구성, 서브시스템들, 그리고 현재 프로젝트들
+(트리 내, 외부에 존재하는)에 관한 기본적인 정보들을 가지고 있다. 또한
+그곳은 커널 컴파일이나 패치를 하는 법과 같은 기본적인 것들을  설명한다.
+
+여러분이 어디서 시작해야 할진 모르지만 커널 개발 커뮤니티에 참여할 수
+있는 일들을 찾길 원한다면 리눅스 커널 Janitor 프로젝트를 살펴봐라.
+         http://janitor.kernelnewbies.org/
+그곳은 시작하기에 아주 딱 좋은 곳이다. 그곳은 리눅스 커널 소스 트리내에
+간단히 정리되고 수정될 수 있는 문제들에 관하여 설명한다. 여러분은 이
+프로젝트를 대표하는 개발자들과 일하면서 자신의 패치를 리눅스 커널 트리에
+반영하기 위한 기본적인 것들을 배우게 될것이며 여러분이 아직 아이디어를
+가지고 있지 않다면 다음에 무엇을 해야할지에 관한 방향을 배울 수 있을
+것이다.
+
+여러분들이 이미 커널 트리에 반영하길 원하는 코드 묶음을 가지고 있지만
+올바른 포맷으로 포장하는데 도움이 필요하다면 그러한 문제를 돕기 위해
+만들어진 kernel-mentors 프로젝트가 있다. 그곳은 메일링 리스트이며
+다음에서 참조할 수 있다.
+         http://selenic.com/mailman/listinfo/kernel-mentors
+
+리눅스 커널 코드에 실제 변경을 하기 전에 반드시 그 코드가 어떻게
+동작하는지 이해하고 있어야 한다. 코드를 분석하기 위하여 특정한 툴의
+도움을 빌려서라도 코드를 직접 읽는 것보다 좋은 것은 없다(대부분의
+자잘한 부분들은 잘 코멘트되어 있다). 그런 툴들 중에 특히 추천할만한
+것은 Linux Cross-Reference project이며 그것은 자기 참조 방식이며
+소스코드를 인덱스된 웹 페이지들의 형태로 보여준다. 최신의 멋진 커널
+코드 저장소는 다음을 통하여 참조할 수 있다.
+      http://sosdg.org/~coywolf/lxr/
+
+
+개발 프로세스
+-------------
+
+리눅스 커널 개발 프로세스는 현재 몇몇 다른 메인 커널 "브랜치들"과
+서브시스템에 특화된 커널 브랜치들로 구성된다. 몇몇 다른 메인
+브랜치들은 다음과 같다.
+  - main 2.6.x 커널 트리
+  - 2.6.x.y - 안정된 커널 트리
+  - 2.6.x -git 커널 패치들
+  - 2.6.x -mm 커널 패치들
+  - 서브시스템을 위한 커널 트리들과 패치들
+
+2.6.x 커널 트리
+---------------
+
+2.6.x 커널들은 Linux Torvalds가 관리하며 kernel.org의 pub/linux/kernel/v2.6/
+디렉토리에서 참조될 수 있다.개발 프로세스는 다음과 같다.
+  - 새로운 커널이 배포되자마자 2주의 시간이 주어진다. 이 기간동은
+    메인트너들은 큰 diff들을 Linus에게 제출할 수 있다. 대개 이 패치들은
+    몇 주 동안 -mm 커널내에 이미 있었던 것들이다. 큰 변경들을 제출하는 데
+    선호되는 방법은  git(커널의 소스 관리 툴, 더 많은 정보들은 http://git.or.cz/
+    에서 참조할 수 있다)를 사용하는 것이지만 순수한 패치파일의 형식으로 보내도
+    것도 무관하다.
+  - 2주 후에 -rc1 커널이 배포되며 지금부터는 전체 커널의 안정성에 영향을
+    미칠수 있는 새로운 기능들을 포함하지 않는 패치들만을 추가될 수 있다.
+    완전히 새로운 드라이버(혹은 파일시스템)는 -rc1 이후에만 받아들여진다는
+    것을 기억해라. 왜냐하면 변경이 자체내에서만 발생하고 추가된 코드가
+    드라이버 외부의 다른 부분에는 영향을 주지 않으므로 그런 변경은
+    퇴보(regression)를 일으킬 만한 위험을 가지고 있지 않기 때문이다. -rc1이
+    배포된 이후에 git를 사용하여 패치들을 Linus에게 보낼수 있지만 패치들은
+    공식적인 메일링 리스트로 보내서 검토를 받을 필요가 있다.
+  - 새로운 -rc는 Linus는 현재 git tree가 테스트 하기에 충분히 안정된 상태에
+    있다고 판단될 때마다 배포된다. 목표는 새로운 -rc 커널을 매주 배포하는
+    것이다.
+  - 이러한 프로세스는 커널이 "준비"되었다고 여겨질때까지 계속된다.
+    프로세스는 대체로 6주간 지속된다.
+    - 각 -rc 배포에 있는 알려진 퇴보의 목록들은 다음 URI에 남겨진다.
+    http://kernelnewbies.org/known_regressions
+
+커널 배포에 있어서 언급할만한 가치가 있는 리눅스 커널 메일링 리스트의
+Andrew Morton의 글이 있다.
+        "커널이 언제 배포될지는 아무로 모른다. 왜냐하면 배포는 알려진
+         버그의 상황에 따라 배포되는 것이지 미리정해 놓은 시간에 따라
+          배포되는 것은 아니기 때문이다."
+
+2.6.x.y - 안정 커널 트리
+------------------------
+
+4 자리 숫자로 이루어진 버젼의 커널들은 -stable 커널들이다. 그것들은 2.6.x
+커널에서 발견된 큰 퇴보들이나 보안 문제들 중 비교적 작고 중요한 수정들을
+포함한다.
+
+이것은 가장 최근의 안정적인 커널을 원하는 사용자에게 추천되는 브랜치이며,
+개발/실험적 버젼을 테스트하는 것을 돕는데는 별로 관심이 없다.
+
+어떤 2.6.x.y 커널도 사용가능하지 않다면 그때는 가장 높은 숫자의 2.6.x
+커널이 현재의 안정 커널이다.
+
+2.6.x.y는 "stable" 팀<stable@kernel.org>에 의해 관리되며 거의 매번 격주로
+배포된다.
+
+커널 트리 문서들 내에 Documentation/stable_kernel_rules.txt 파일은 어떤
+종류의 변경들이 -stable 트리로 들어왔는지와 배포 프로세스가 어떻게
+진행되는지를 설명한다.
+
+
+2.6.x -git 패치들
+------------------
+git 저장소(그러므로 -git이라는 이름이 붙음)에는 날마다 관리되는 Linus의
+커널 트리의 snapshot 들이 있다. 이 패치들은 일반적으로 날마다 배포되며
+Linus의 트리의 현재 상태를 나타낸다. 이 패치들은 정상적인지 조금도
+살펴보지 않고 자동적으로 생성된 것이므로 -rc 커널들 보다도 더 실험적이다.
+
+2.6.x -mm 커널 패치들
+---------------------
+Andrew Morton에 의해 배포된 실험적인 커널 패치들이다. Andrew는 모든 다른
+서브시스템 커널 트리와 패치들을 가져와서 리눅스 커널 메일링 리스트로
+온 많은 패치들과 한데 묶는다. 이 트리는 새로운 기능들과 패치들을 위한
+장소를 제공하는 역할을 한다. 하나의 패치가 -mm에 한동안 있으면서 그 가치가
+증명되게 되면 Andrew나 서브시스템 메인트너는 그것을 메인라인에 포함시키기
+위하여 Linus에게 보낸다.
+
+커널 트리에 포함하고 싶은 모든 새로운 패치들은 Linus에게 보내지기 전에
+-mm 트리에서 테스트를 하는 것을 적극 추천한다.
+
+이 커널들은 안정되게 사용할 시스템에서에 실행하는 것은 적합하지 않으며
+다른 브랜치들의 어떤 것들보다 위험하다.
+
+여러분이 커널 개발 프로세스를 돕길 원한다면 이 커널 배포들을 사용하고
+테스트한 후 어떤 문제를 발견하거나 또는 모든 것이 잘 동작한다면 리눅스
+커널 메일링 리스트로 피드백을 해달라.
+
+이 커널들은 일반적으로 모든 다른 실험적인 패치들과 배포될 당시의
+사용가능한 메인라인 -git 커널들의 몇몇 변경을 포함한다.
+
+-mm 커널들은 정해진 일정대로 배포되지 않는다. 하지만 대개 몇몇 -mm 커널들은
+각 -rc 커널(1부터 3이 흔함) 사이에서 배포된다.
+
+서브시스템 커널 트리들과 패치들
+-------------------------------
+많은 다른 커널 서브시스템 개발자들은 커널의 다른 부분들에서 무슨 일이
+일어나고 있는지를 볼수 있도록 그들의 개발 트리를 공개한다. 이 트리들은
+위에서 설명하였던 것 처럼 -mm 커널 배포들로 합쳐진다.
+
+다음은  활용가능한 커널 트리들을 나열한다.
+  git trees:
+    - Kbuild development tree, Sam Ravnborg < sam@ravnborg.org>
+    git.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
+
+    - ACPI development tree, Len Brown <len.brown@intel.com >
+    git.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
+
+    - Block development tree, Jens Axboe <axboe@suse.de>
+    git.kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
+
+    - DRM development tree, Dave Airlie <airlied@linux.ie>
+    git.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+
+    - ia64 development tree, Tony Luck < tony.luck@intel.com>
+    git.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
+
+    - infiniband, Roland Dreier <rolandd@cisco.com >
+    git.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
+
+    - libata, Jeff Garzik <jgarzik@pobox.com>
+    git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
+
+    - network drivers, Jeff Garzik <jgarzik@pobox.com>
+    git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
+
+    - pcmcia, Dominik Brodowski < linux@dominikbrodowski.net>
+    git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
+
+    - SCSI, James Bottomley < James.Bottomley@SteelEye.com>
+    git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
+
+  quilt trees:
+    - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman < gregkh@suse.de>
+    kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+    - x86-64, partly i386, Andi Kleen < ak@suse.de>
+        ftp.firstfloor.org:/pub/ak/x86_64/quilt/
+
+  다른 커널 트리들은 http://kernel.org/git와 MAINTAINERS 파일에서 참조할 수
+  있다.
+
+버그 보고
+---------
+bugzilla.kernel.org는 리눅스 커널 개발자들이 커널의 버그를 추적하는 곳이다.
+사용자들은 발견한 모든 버그들을 보고하기 위하여 이 툴을 사용할 것을 권장한다.
+kernel bugzilla를 사용하는 자세한 방법은 다음을 참조하라.
+    http://test.kernel.org/bugzilla/faq.html
+
+메인 커널 소스 디렉토리에 있는 REPORTING-BUGS 파일은 커널 버그일 것 같은
+것을 보고하는는 법에 관한 좋은 템플릿이고 문제를 추적하기 위해서 커널
+개발자들이 필요로 하는 정보가 무엇들인지를 상세히 설명하고 있다.
+
+
+버그 리포트들의 관리
+--------------------
+
+여러분의 해킹 기술을 연습하는 가장 좋은 방법 중의 하는 다른 사람들이
+보고한 버그들을 수정하는 것이다. 여러분은 커널을 더욱 안정화시키는데
+도움을 줄 뿐만이 아니라 실제있는 문제들을 수정하는 법을 배우게 되고
+그와 함께 여러분들의 기술은 향상될 것이며 다른 개발자들이 여러분의
+존재에 대해 알게 될 것이다. 버그를 수정하는 것은 개발자들  사이에서
+점수를 얻을 수 있는 가장 좋은 방법중의 하나이다. 왜냐하면 많은 사람들은
+다른 사람들의 버그들을 수정하기 위하여 시간을 낭비하지 않기 때문이다.
+
+이미 보고된 버그 리포트들을 가지고 작업하기 위해서 http://bugzilla.kernelorg를
+참조하라. 여러분이 앞으로 생겨날 버그 리포트들의 조언자가 되길 원한다면
+bugme-new 메일링 리스트나(새로운 버그 리포트들만이 이곳에서 메일로 전해진다)
+bugme-janitor 메일링 리스트(bugzilla에 모든 변화들이 여기서 메일로 전해진다)
+에 등록하면 된다.
+
+      http://lists.osdl.org/mailman/listinfo/bugme-new
+      http://lists.osdl.org/mailman/listinfo/bugme-janitors
+
+
+
+메일링 리스트들
+---------------
+
+위의 몇몇 문서들이 설명하였지만 핵심 커널 개발자들의 대다수는
+리눅스 커널 메일링 리스트에 참여하고 있다. 리스트에 등록하고 해지하는
+방법에 관한 자세한 사항은 다음에서 참조할 수 있다.
+    http://vger.kernel.org/vger-lists.html#linux-kernel
+웹상의 많은 다른 곳에도 메일링 리스트의 아카이브들이 있다.
+이러한 아카이브들을 찾으려면 검색 엔진을 사용하라. 예를 들어:
+      http://dir.gmane.org/gmane.linux.kernel
+여러분이 새로운 문제에 관해 리스트에 올리기 전에 말하고 싶은 주제에 대한
+것을 아카이브에서 먼저 찾기를 강력히 권장한다. 이미 상세하게 토론된 많은
+것들이 메일링 리스트의 아카이브에 기록되어 있다.
+
+각각의 커널 서브시스템들의 대부분은 자신들의 개발에 관한 노력들로 이루어진
+분리된 메일링 리스트를 따로 가지고 있다. 다른 그룹들이 무슨 리스트를 가지고
+있는지는 MAINTAINERS 파일을 참조하라.
+
+많은 리스트들은 kernel.org에서 호스트되고 있다. 그 정보들은 다음에서 참조될 수 있다.
+         http://vger.kernel.org/vger-lists.html
+
+리스트들을 사용할 때는 올바른 예절을 따를 것을 유념해라.
+대단하진 않지만 다음 URL은 리스트(혹은 모든 리스트)와 대화하는 몇몇 간단한
+가이드라인을 가지고 있다.
+         http://www.albion.com/netiquette/
+
+여러 사람들이 여러분의 메일에 응답한다면 CC: 즉 수신 리스트는 꽤 커지게
+될 것이다. 아무 이유없이 CC에서 어떤 사람도 제거하거나 리스트 주소로만
+회신하지 마라. 메일을 보낸 사람으로서 하나를 받고 리스트로부터 또
+하나를 받아 두번 받는 것에 익숙하여 있으니 mail-header를 조작하려고 하지
+말아라. 사람들은 그런 것을 좋아하지 않을 것이다.
+
+여러분의 회신의 문맥을 원래대로 유지해야 한다. 여러분들의 회신의 윗부분에
+"John 커널해커는 작성했다...."를 유지하며 여러분들의 의견을 그 메일의 윗부분에
+작성하지 말고 각 인용한 단락들 사이에 넣어라.
+
+여러분들이 패치들을 메일에 넣는다면 그것들은 Documentation/SubmittingPatches에
+나와있는데로 명백히(plain) 읽을 수 있는 텍스트여야 한다. 커널 개발자들은
+첨부파일이나 압축된 패치들을 원하지 않는다. 그들은 여러분들의 패치의
+각 라인 단위로 코멘트를 하길 원하며 압축하거나 첨부하지 않고 보내는 것이
+그렇게 할 수 있는 유일한 방법이다. 여러분들이 사용하는 메일 프로그램이
+스페이스나 탭 문자들을 조작하지 않는지 확인하라. 가장 좋은 첫 테스트는
+메일을 자신에게 보내보고 스스로 그 패치를 적용해보라. 그것이 동작하지
+않는다면 여러분의 메일 프로그램을 고치던가 제대로 동작하는 프로그램으로
+바꾸어라.
+
+무엇보다도 메일링 리스트의 다른 구독자들에게 보여주려 한다는 것을 기억하라.
+
+
+커뮤니티와 일하는 법
+--------------------
+
+커널 커뮤니티의 목적은 가능한한 가장 좋은 커널을 제공하는 것이다. 여러분이
+받아들여질 패치를 제출하게 되면 그 패치의 기술적인 이점으로 검토될 것이다.
+그럼 여러분들은 무엇을 기대하고 있어야 하는가?
+ - 비판
+ - 의견
+ - 변경을 위한 요구
+ - 당위성을 위한 요구
+ - 고요
+
+기억하라. 이것들은 여러분의 패치가 커널로 들어가기 위한 과정이다. 여러분의
+패치들은 비판과 다른 의견을 받을 수 있고 그것들을 기술적인 레벨로 평가하고
+재작업하거나 또는 왜 수정하면 안되는지에 관하여 명료하고 간결한 이유를
+말할 수 있어야 한다. 여러분이 제출한 것에 어떤 응답도 있지 않다면 몇 일을
+기다려보고 다시 시도해라. 때론 너무 많은 메일들 속에 묻혀버리기도 한다.
+
+여러분은 무엇을 해서는 안되는가?
+ - 여러분의 패치가 아무 질문 없이 받아들여지기를 기대하는 것
+ - 방어적이 되는 것
+ - 의견을 무시하는 것
+ - 요청된 변경을 하지 않고 패치를 다시 제출하는 것
+
+가능한한 가장 좋은 기술적인 해답을 찾고 있는 커뮤니티에서는 항상
+어떤 패치가 얼마나 좋은지에 관하여 다른 의견들이 있을 수 있다. 여러분은
+협조적이어야 하고 기꺼이 여러분의 생각을 커널 내에 맞추어야 한다. 아니면
+적어도 여러분의 것이 가치있다는 것을 중명하여야 한다. 잘못된 것도 여러분이
+올바른 방향의 해결책으로 이끌어갈 의지가 있다면 받아들여질 것이라는 점을
+기억하라.
+
+여러분의 첫 패치에  여러분이 수정해야하는 십여개 정도의 회신이 오는
+경우도 흔하다. 이것은 여러분의 패치가 받아들여지지 않을 것이라는 것을
+의미하는 것이 아니고 개인적으로 여러분에게 감정이 있어서 그러는 것도
+아니다. 간단히 여러분의 패치에 제기된 문제들을 수정하고 그것을 다시
+보내라.
+
+
+커널 커뮤니티와 기업 조직간의 차이점
+-----------------------------------------------------------------
+커널 커뮤니티는 가장 전통적인 회사의 개발 환경과는 다르다. 여기에 여러분들의
+문제를 피하기 위한 목록이 있다.
+  여러분들이 제안한 변경들에 관하여 말할 때 좋은 것들 :
+    - " 이것은 여러 문제들을 해겹합니다."
+    - "이것은 2000 라인의 코드를 제거합니다."
+    - "이것은 내가 말하려는 것에 관해 설명하는 패치입니다."
+    - "나는 5개의 다른 아키텍쳐에서 그것을 테스트했슴으로..."
+    - "여기에 일련의 작은 패치들이 있습음로..."
+    - "이것은 일반적인 머신에서 성능을 향상시키므로..."
+
+  여러분들이 말할 때 피해야 할 좋지 않은 것들 :
+    - "우리를 그것을 AIT/ptx/Solaris에서 이러한 방법으로 했다. 그러므로 그것은 좋은 것임에 틀립없다..."
+    - "나는 20년동안 이것을 해왔다. 그러므로..."
+    - "이것은 돈을 벌기위해 나의 회사가 필요로 하는 것이다."
+    - "이것은 우리의 엔터프라이즈 상품 라인을 위한 것이다."
+    - "여기에 나의 생각을 말하고 있는 1000 페이지 설계 문서가 있다."
+    - "나는 6달동안 이것을 했으니..."
+    - "여기세 5000라인 짜리 패치가 있으니..."
+    - "나는 현재 뒤죽박죽인 것을 재작성했다. 그리고 여기에..."
+    - "나는 마감시한을 가지고 있으므로 이 패치는 지금 적용될 필요가 있다."
+
+커널 커뮤니티가 전통적인 소프트웨어 엔지니어링 개발 환경들과
+또 다른 점은 얼굴을 보지 않고 일한다는 점이다. 이메일과 irc를 대화의
+주요수단으로 사용하는 것의 한가지 장점은 성별이나 인종의 차별이
+없다는 것이다. 리눅스 커널의 작업 환경에서는 단지 이메일 주소만
+알수 있기 때문에 여성과 소수 민족들도 모두 받아들여진다. 국제적으로
+일하게 되는 측면은 사람의 이름에 근거하여 성별을 추측할 수 없게
+하기때문에  차별을 없애는 데 도움을 준다. Andrea라는 이름을 가진 남자와
+Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅스 커널에서
+작업하며 생각을 표현해왔던 대부분의 여성들은 긍정적인 경험을 가지고
+있다.
+
+언어 장벽은 영어에 익숙하지 않은 몇몇 사람들에게 문제가 될 수도 있다.
+ 언어의 훌륭한 구사는 메일링 리스트에서 올바르게 자신의 생각을
+표현하기 위하여 필요하다. 그래서 여러분은 이메일을 보내기 전에
+영어를 올바르게 사용하고 있는지를 체크하는 것이 바람직하다.
+
+
+여러분의 변경을 나누어라
+------------------------
+
+리눅스 커널 커뮤니티는 한꺼번에 굉장히 큰 코드의 묶음을 쉽게
+받아들이지 않는다. 변경은 적절하게 소개되고, 검토되고, 각각의
+부분으로 작게 나누어져야 한다. 이것은 회사에서 하는 것과는 정확히
+반대되는 것이다. 여러분들의 제안은 개발 초기에 일찍이 소개되야 한다.
+그래서 여러분들은 자신이 하고 있는 것에 관하여 피드백을 받을 수 있게
+된다. 커뮤니티가 여러분들이 커뮤니티와 함께 일하고 있다는 것을
+느끼도록 만들고 커뮤니티가 여러분의 기능을 위한 쓰레기 장으로서
+사용되지 않고 있다는 것을 느끼게 하자. 그러나 메일링 리스트에 한번에
+50개의 이메일을 보내지는 말아라. 여러분들의 일련의 패치들은 항상
+더 작아야 한다.
+
+패치를 나누는 이유는 다음과 같다.
+
+1) 작은 패치들은 여러분의 패치들이 적용될 수 있는 확률을 높여준다.
+   왜냐하면 다른 사람들은 정확성을 검증하기 위하여 많은 시간과 노력을
+   들이기를 원하지 않는다. 5줄의 패치는 메인트너가 거의 몇 초간 힐끗
+   보면 적용될 수 있다. 그러나 500 줄의 패치는 정확성을 검토하기 위하여
+   몇시간이 걸릴 수도 있다(걸리는 시간은 패치의 크기 혹은 다른 것에
+   비례하여 기하급수적으로 늘어난다).
+
+   패치를 작게 만드는 것은 무엇인가 잘못되었을 때 디버그하는 것을
+   쉽게 만든다. 즉, 그렇게 만드는 것은 매우 큰 패치를 적용한 후에
+   조사하는 것 보다 작은 패치를 적용한 후에 (그리고 몇몇의 것이
+   깨졌을 때) 하나씩 패치들을 제거해가며 디버그 하기 쉽도록 만들어 준다.
+
+2) 작은 패치들을 보내는 것뿐만 아니라 패치들을 제출하기전에 재작성하고
+   간단하게(혹은 간단한게 재배치하여) 하는 것도 중요하다.
+
+여기에 커널 개발자 Al Viro의 이야기가 있다.
+    "학생의 수학 숙제를 채점하는 선생님을 생각해보라. 선생님은 학생들이
+    답을 얻을때까지 겪은 시행착오를 보길 원하지 않는다. 선생님들은
+    간결하고 가장 뛰어난 답을 보길 원한다. 훌륭한 학생은 이것을 알고
+    마지막으로 답을 얻기 전 중간 과정들을 제출하진 않는다.
+
+    커널 개발도 마찬가지이다. 메인트너들과 검토하는 사람들은 문제를
+    풀어나가는 과정속에 숨겨진 과정을 보길 원하진 않는다. 그들은
+    간결하고 멋진 답을 보길 원한다."
+
+커뮤니티와 함께 일하며 뛰어난 답을 찾고 여러분들의 완성되지 않은 일들
+사이에 균형을 유지해야 하는 어려움이 있을 수 있다. 그러므로 프로세스의
+초반에 여러분의 일을 향상시키기위한 피드백을 얻는 것 뿐만 아니라
+여러분들의 변경들을 작은 묶음으로 유지해서 심지어는 여러분의 작업의
+모든 부분이 지금은 포함될 준비가 되어있지 않지만 작은 부분은 이미
+받아들여질 수 있도록 유지하는 것이 바람직하다.
+
+또한 완성되지 않았고 "나중에 수정될 것이다." 와 같은 것들은 포함하는
+패치들은 받아들여지지 않을 것이라는 점을 유념하라.
+
+변경을 정당화해라
+-----------------
+
+여러분들의 나누어진 패치들을 리눅스 커뮤니티가 왜 반영해야 하는지를
+알도록 하는 것은 매우 중요하다. 새로운 기능들이 필요하고 유용하다는
+것은 반드시 그에 맞는 이유가 있어야 한다.
+
+
+변경을 문서화해라
+-----------------
+
+여러분이 패치를 보내려 할때는 여러분이 무엇을 말하려고 하는지를 충분히
+생각하여 이메일을 작성해야 한다. 이 정보는 패치를 위한 ChangeLog가 될
+것이다. 그리고 항상 그 내용을 보길 원하는 모든 사람들을 위해 보존될
+것이다. 패치는 완벽하게 다음과 같은 내용들을 포함하여 설명해야 한다.
+  - 변경이 왜 필요한지
+  - 패치에 관한 전체 설계 어프로치
+  - 구현 상세들
+  - 테스트 결과들
+
+이것이 무엇인지 더 자세한 것을 알고 싶다면 다음 문서의 ChageLog 항을 봐라.
+   "The Perfect Patch"
+    http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+
+
+
+
+이 모든 것을 하는 것은 매우 어려운 일이다. 완벽히 소화하는 데는 적어도 몇년이
+걸릴 수도 있다. 많은 인내와 결의가 필요한 계속되는 개선의 과정이다. 그러나
+가능한한 포기하지 말라. 많은 사람들은 이전부터 해왔던 것이고 그 사람들도
+정확하게 여러분들이 지금 서 있는 그 곳부터  시작했었다.
+
+
+
+
+----------
+"개발 프로세스"(http://linux.tar.gz/articles/2.6-development_process) 섹션을
+작성하는데 있어 참고할 문서를 사용하도록 허락해준 Paolo Ciarrocchi에게
+감사한다. 여러분들이 말해야 할 것과 말해서는 안되는 것의 목록 중 일부를 제공해준
+Randy Dunlap과 Gerrit Huizenga에게 감사한다. 또한 검토와 의견 그리고
+공헌을 아끼지 않은 Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
+Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi Kleen,
+Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop,
+David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard에게도 감사를 전한다.
+그들의 도움이 없었다면 이 문서는 존재하지 않았을 것이다.
+
+
+
+메인트너: Greg Kroah-Hartman <greg@kroah.com>
diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt
new file mode 100644
index 0000000..8242f52
--- /dev/null
+++ b/Documentation/vm/numa_memory_policy.txt
@@ -0,0 +1,332 @@
+
+What is Linux Memory Policy?
+
+In the Linux kernel, "memory policy" determines from which node the kernel will
+allocate memory in a NUMA system or in an emulated NUMA system.  Linux has
+supported platforms with Non-Uniform Memory Access architectures since 2.4.?.
+The current memory policy support was added to Linux 2.6 around May 2004.  This
+document attempts to describe the concepts and APIs of the 2.6 memory policy
+support.
+
+Memory policies should not be confused with cpusets (Documentation/cpusets.txt)
+which is an administrative mechanism for restricting the nodes from which
+memory may be allocated by a set of processes. Memory policies are a
+programming interface that a NUMA-aware application can take advantage of.  When
+both cpusets and policies are applied to a task, the restrictions of the cpuset
+takes priority.  See "MEMORY POLICIES AND CPUSETS" below for more details.
+
+MEMORY POLICY CONCEPTS
+
+Scope of Memory Policies
+
+The Linux kernel supports _scopes_ of memory policy, described here from
+most general to most specific:
+
+    System Default Policy:  this policy is "hard coded" into the kernel.  It
+    is the policy that governs all page allocations that aren't controlled
+    by one of the more specific policy scopes discussed below.  When the
+    system is "up and running", the system default policy will use "local
+    allocation" described below.  However, during boot up, the system
+    default policy will be set to interleave allocations across all nodes
+    with "sufficient" memory, so as not to overload the initial boot node
+    with boot-time allocations.
+
+    Task/Process Policy:  this is an optional, per-task policy.  When defined
+    for a specific task, this policy controls all page allocations made by or
+    on behalf of the task that aren't controlled by a more specific scope.
+    If a task does not define a task policy, then all page allocations that
+    would have been controlled by the task policy "fall back" to the System
+    Default Policy.
+
+	The task policy applies to the entire address space of a task. Thus,
+	it is inheritable, and indeed is inherited, across both fork()
+	[clone() w/o the CLONE_VM flag] and exec*().  This allows a parent task
+	to establish the task policy for a child task exec()'d from an
+	executable image that has no awareness of memory policy.  See the
+	MEMORY POLICY APIS section, below, for an overview of the system call
+	that a task may use to set/change it's task/process policy.
+
+	In a multi-threaded task, task policies apply only to the thread
+	[Linux kernel task] that installs the policy and any threads
+	subsequently created by that thread.  Any sibling threads existing
+	at the time a new task policy is installed retain their current
+	policy.
+
+	A task policy applies only to pages allocated after the policy is
+	installed.  Any pages already faulted in by the task when the task
+	changes its task policy remain where they were allocated based on
+	the policy at the time they were allocated.
+
+    VMA Policy:  A "VMA" or "Virtual Memory Area" refers to a range of a task's
+    virtual adddress space.  A task may define a specific policy for a range
+    of its virtual address space.   See the MEMORY POLICIES APIS section,
+    below, for an overview of the mbind() system call used to set a VMA
+    policy.
+
+    A VMA policy will govern the allocation of pages that back this region of
+    the address space.  Any regions of the task's address space that don't
+    have an explicit VMA policy will fall back to the task policy, which may
+    itself fall back to the System Default Policy.
+
+    VMA policies have a few complicating details:
+
+	VMA policy applies ONLY to anonymous pages.  These include pages
+	allocated for anonymous segments, such as the task stack and heap, and
+	any regions of the address space mmap()ed with the MAP_ANONYMOUS flag.
+	If a VMA policy is applied to a file mapping, it will be ignored if
+	the mapping used the MAP_SHARED flag.  If the file mapping used the
+	MAP_PRIVATE flag, the VMA policy will only be applied when an
+	anonymous page is allocated on an attempt to write to the mapping--
+	i.e., at Copy-On-Write.
+
+	VMA policies are shared between all tasks that share a virtual address
+	space--a.k.a. threads--independent of when the policy is installed; and
+	they are inherited across fork().  However, because VMA policies refer
+	to a specific region of a task's address space, and because the address
+	space is discarded and recreated on exec*(), VMA policies are NOT
+	inheritable across exec().  Thus, only NUMA-aware applications may
+	use VMA policies.
+
+	A task may install a new VMA policy on a sub-range of a previously
+	mmap()ed region.  When this happens, Linux splits the existing virtual
+	memory area into 2 or 3 VMAs, each with it's own policy.
+
+	By default, VMA policy applies only to pages allocated after the policy
+	is installed.  Any pages already faulted into the VMA range remain
+	where they were allocated based on the policy at the time they were
+	allocated.  However, since 2.6.16, Linux supports page migration via
+	the mbind() system call, so that page contents can be moved to match
+	a newly installed policy.
+
+    Shared Policy:  Conceptually, shared policies apply to "memory objects"
+    mapped shared into one or more tasks' distinct address spaces.  An
+    application installs a shared policies the same way as VMA policies--using
+    the mbind() system call specifying a range of virtual addresses that map
+    the shared object.  However, unlike VMA policies, which can be considered
+    to be an attribute of a range of a task's address space, shared policies
+    apply directly to the shared object.  Thus, all tasks that attach to the
+    object share the policy, and all pages allocated for the shared object,
+    by any task, will obey the shared policy.
+
+	As of 2.6.22, only shared memory segments, created by shmget() or
+	mmap(MAP_ANONYMOUS|MAP_SHARED), support shared policy.  When shared
+	policy support was added to Linux, the associated data structures were
+	added to hugetlbfs shmem segments.  At the time, hugetlbfs did not
+	support allocation at fault time--a.k.a lazy allocation--so hugetlbfs
+	shmem segments were never "hooked up" to the shared policy support.
+	Although hugetlbfs segments now support lazy allocation, their support
+	for shared policy has not been completed.
+
+	As mentioned above [re: VMA policies], allocations of page cache
+	pages for regular files mmap()ed with MAP_SHARED ignore any VMA
+	policy installed on the virtual address range backed by the shared
+	file mapping.  Rather, shared page cache pages, including pages backing
+	private mappings that have not yet been written by the task, follow
+	task policy, if any, else System Default Policy.
+
+	The shared policy infrastructure supports different policies on subset
+	ranges of the shared object.  However, Linux still splits the VMA of
+	the task that installs the policy for each range of distinct policy.
+	Thus, different tasks that attach to a shared memory segment can have
+	different VMA configurations mapping that one shared object.  This
+	can be seen by examining the /proc/<pid>/numa_maps of tasks sharing
+	a shared memory region, when one task has installed shared policy on
+	one or more ranges of the region.
+
+Components of Memory Policies
+
+    A Linux memory policy is a tuple consisting of a "mode" and an optional set
+    of nodes.  The mode determine the behavior of the policy, while the
+    optional set of nodes can be viewed as the arguments to the behavior.
+
+   Internally, memory policies are implemented by a reference counted
+   structure, struct mempolicy.  Details of this structure will be discussed
+   in context, below, as required to explain the behavior.
+
+	Note:  in some functions AND in the struct mempolicy itself, the mode
+	is called "policy".  However, to avoid confusion with the policy tuple,
+	this document will continue to use the term "mode".
+
+   Linux memory policy supports the following 4 behavioral modes:
+
+	Default Mode--MPOL_DEFAULT:  The behavior specified by this mode is
+	context or scope dependent.
+
+	    As mentioned in the Policy Scope section above, during normal
+	    system operation, the System Default Policy is hard coded to
+	    contain the Default mode.
+
+	    In this context, default mode means "local" allocation--that is
+	    attempt to allocate the page from the node associated with the cpu
+	    where the fault occurs.  If the "local" node has no memory, or the
+	    node's memory can be exhausted [no free pages available], local
+	    allocation will "fallback to"--attempt to allocate pages from--
+	    "nearby" nodes, in order of increasing "distance".
+
+		Implementation detail -- subject to change:  "Fallback" uses
+		a per node list of sibling nodes--called zonelists--built at
+		boot time, or when nodes or memory are added or removed from
+		the system [memory hotplug].  These per node zonelist are
+		constructed with nodes in order of increasing distance based
+		on information provided by the platform firmware.
+
+	    When a task/process policy or a shared policy contains the Default
+	    mode, this also means "local allocation", as described above.
+
+	    In the context of a VMA, Default mode means "fall back to task
+	    policy"--which may or may not specify Default mode.  Thus, Default
+	    mode can not be counted on to mean local allocation when used
+	    on a non-shared region of the address space.  However, see
+	    MPOL_PREFERRED below.
+
+	    The Default mode does not use the optional set of nodes.
+
+	MPOL_BIND:  This mode specifies that memory must come from the
+	set of nodes specified by the policy.
+
+	    The memory policy APIs do not specify an order in which the nodes
+	    will be searched.  However, unlike "local allocation", the Bind
+	    policy does not consider the distance between the nodes.  Rather,
+	    allocations will fallback to the nodes specified by the policy in
+	    order of numeric node id.  Like everything in Linux, this is subject
+	    to change.
+
+	MPOL_PREFERRED:  This mode specifies that the allocation should be
+	attempted from the single node specified in the policy.  If that
+	allocation fails, the kernel will search other nodes, exactly as
+	it would for a local allocation that started at the preferred node
+	in increasing distance from the preferred node.  "Local" allocation
+	policy can be viewed as a Preferred policy that starts at the node
+	containing the cpu where the allocation takes place.
+
+	    Internally, the Preferred policy uses a single node--the
+	    preferred_node member of struct mempolicy.  A "distinguished
+	    value of this preferred_node, currently '-1', is interpreted
+	    as "the node containing the cpu where the allocation takes
+	    place"--local allocation.  This is the way to specify
+	    local allocation for a specific range of addresses--i.e. for
+	    VMA policies.
+
+	MPOL_INTERLEAVED:  This mode specifies that page allocations be
+	interleaved, on a page granularity, across the nodes specified in
+	the policy.  This mode also behaves slightly differently, based on
+	the context where it is used:
+
+	    For allocation of anonymous pages and shared memory pages,
+	    Interleave mode indexes the set of nodes specified by the policy
+	    using the page offset of the faulting address into the segment
+	    [VMA] containing the address modulo the number of nodes specified
+	    by the policy.  It then attempts to allocate a page, starting at
+	    the selected node, as if the node had been specified by a Preferred
+	    policy or had been selected by a local allocation.  That is,
+	    allocation will follow the per node zonelist.
+
+	    For allocation of page cache pages, Interleave mode indexes the set
+	    of nodes specified by the policy using a node counter maintained
+	    per task.  This counter wraps around to the lowest specified node
+	    after it reaches the highest specified node.  This will tend to
+	    spread the pages out over the nodes specified by the policy based
+	    on the order in which they are allocated, rather than based on any
+	    page offset into an address range or file.  During system boot up,
+	    the temporary interleaved system default policy works in this
+	    mode.
+
+MEMORY POLICY APIs
+
+Linux supports 3 system calls for controlling memory policy.  These APIS
+always affect only the calling task, the calling task's address space, or
+some shared object mapped into the calling task's address space.
+
+	Note:  the headers that define these APIs and the parameter data types
+	for user space applications reside in a package that is not part of
+	the Linux kernel.  The kernel system call interfaces, with the 'sys_'
+	prefix, are defined in <linux/syscalls.h>; the mode and flag
+	definitions are defined in <linux/mempolicy.h>.
+
+Set [Task] Memory Policy:
+
+	long set_mempolicy(int mode, const unsigned long *nmask,
+					unsigned long maxnode);
+
+	Set's the calling task's "task/process memory policy" to mode
+	specified by the 'mode' argument and the set of nodes defined
+	by 'nmask'.  'nmask' points to a bit mask of node ids containing
+	at least 'maxnode' ids.
+
+	See the set_mempolicy(2) man page for more details
+
+
+Get [Task] Memory Policy or Related Information
+
+	long get_mempolicy(int *mode,
+			   const unsigned long *nmask, unsigned long maxnode,
+			   void *addr, int flags);
+
+	Queries the "task/process memory policy" of the calling task, or
+	the policy or location of a specified virtual address, depending
+	on the 'flags' argument.
+
+	See the get_mempolicy(2) man page for more details
+
+
+Install VMA/Shared Policy for a Range of Task's Address Space
+
+	long mbind(void *start, unsigned long len, int mode,
+		   const unsigned long *nmask, unsigned long maxnode,
+		   unsigned flags);
+
+	mbind() installs the policy specified by (mode, nmask, maxnodes) as
+	a VMA policy for the range of the calling task's address space
+	specified by the 'start' and 'len' arguments.  Additional actions
+	may be requested via the 'flags' argument.
+
+	See the mbind(2) man page for more details.
+
+MEMORY POLICY COMMAND LINE INTERFACE
+
+Although not strictly part of the Linux implementation of memory policy,
+a command line tool, numactl(8), exists that allows one to:
+
++ set the task policy for a specified program via set_mempolicy(2), fork(2) and
+  exec(2)
+
++ set the shared policy for a shared memory segment via mbind(2)
+
+The numactl(8) tool is packages with the run-time version of the library
+containing the memory policy system call wrappers.  Some distributions
+package the headers and compile-time libraries in a separate development
+package.
+
+
+MEMORY POLICIES AND CPUSETS
+
+Memory policies work within cpusets as described above.  For memory policies
+that require a node or set of nodes, the nodes are restricted to the set of
+nodes whose memories are allowed by the cpuset constraints.  If the
+intersection of the set of nodes specified for the policy and the set of nodes
+allowed by the cpuset is the empty set, the policy is considered invalid and
+cannot be installed.
+
+The interaction of memory policies and cpusets can be problematic for a
+couple of reasons:
+
+1) the memory policy APIs take physical node id's as arguments.  However, the
+   memory policy APIs do not provide a way to determine what nodes are valid
+   in the context where the application is running.  An application MAY consult
+   the cpuset file system [directly or via an out of tree, and not generally
+   available, libcpuset API] to obtain this information, but then the
+   application must be aware that it is running in a cpuset and use what are
+   intended primarily as administrative APIs.
+
+   However, as long as the policy specifies at least one node that is valid
+   in the controlling cpuset, the policy can be used.
+
+2) when tasks in two cpusets share access to a memory region, such as shared
+   memory segments created by shmget() of mmap() with the MAP_ANONYMOUS and
+   MAP_SHARED flags, and any of the tasks install shared policy on the region,
+   only nodes whose memories are allowed in both cpusets may be used in the
+   policies.  Again, obtaining this information requires "stepping outside"
+   the memory policy APIs, as well as knowing in what cpusets other task might
+   be attaching to the shared region, to use the cpuset information.
+   Furthermore, if the cpusets' allowed memory sets are disjoint, "local"
+   allocation is the only valid policy.
diff --git a/MAINTAINERS b/MAINTAINERS
index 371fe67..abe5fa7f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3452,7 +3452,7 @@
 
 TPM DEVICE DRIVER
 P:	Kylene Hall
-M:	kjhall@us.ibm.com
+M:	tpmdd-devel@lists.sourceforge.net
 W:	http://tpmdd.sourceforge.net
 P:	Marcel Selhorst
 M:	tpm@selhorst.net
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index e061b63..dfbe7ab 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -37,6 +37,7 @@
 #include <linux/a.out.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
+#include <linux/fs.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c
index de7688c..ddc6272 100644
--- a/arch/h8300/kernel/sys_h8300.c
+++ b/arch/h8300/kernel/sys_h8300.c
@@ -18,6 +18,7 @@
 #include <linux/mman.h>
 #include <linux/file.h>
 #include <linux/utsname.h>
+#include <linux/fs.h>
 
 #include <asm/setup.h>
 #include <asm/uaccess.h>
diff --git a/arch/i386/xen/xen-head.S b/arch/i386/xen/xen-head.S
index bc71f3b..f8d6937 100644
--- a/arch/i386/xen/xen-head.S
+++ b/arch/i386/xen/xen-head.S
@@ -7,20 +7,20 @@
 #include <asm/boot.h>
 #include <xen/interface/elfnote.h>
 
-	.section .init.text
+.pushsection .init.text
 ENTRY(startup_xen)
 	movl %esi,xen_start_info
 	cld
 	movl $(init_thread_union+THREAD_SIZE),%esp
 	jmp xen_start_kernel
+.popsection
 
-.pushsection ".bss.page_aligned"
+.pushsection .bss.page_aligned
 	.align PAGE_SIZE_asm
 ENTRY(hypercall_page)
 	.skip 0x1000
 .popsection
 
-	.section .text
 	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS,       .asciz "linux")
 	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION,  .asciz "2.6")
 	ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION,    .asciz "xen-3.0")
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index 7e6d5fb..ed3a4ca 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -62,7 +62,6 @@
 int m68k_realnum_memory;
 EXPORT_SYMBOL(m68k_realnum_memory);
 unsigned long m68k_memoffset;
-EXPORT_SYMBOL(m68k_memoffset);
 struct mem_info m68k_memory[NUM_MEMINFO];
 EXPORT_SYMBOL(m68k_memory);
 
@@ -200,7 +199,6 @@
 		       (m68k_num_memory - 1));
 		m68k_num_memory = 1;
 	}
-	m68k_memoffset = m68k_memory[0].addr-PAGE_OFFSET;
 #endif
 }
 
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index c422457..59fe285 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -19,6 +19,8 @@
 	*(.gnu.warning)
 	} :text = 0x4e75
 
+  _etext = .;			/* End of text section */
+
   . = ALIGN(16);		/* Exception table */
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
@@ -26,8 +28,6 @@
 
   RODATA
 
-  _etext = .;			/* End of text section */
-
   .data : {			/* Data */
 	DATA_DATA
 	CONSTRUCTORS
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 7d571a2..30d34f2 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -210,11 +210,7 @@
 	int i;
 
 #ifdef DEBUG
-	{
-		extern unsigned long availmem;
-		printk ("start of paging_init (%p, %lx)\n",
-			kernel_pg_dir, availmem);
-	}
+	printk ("start of paging_init (%p, %lx)\n", kernel_pg_dir, availmem);
 #endif
 
 	/* Fix the cache mode in the page descriptors for the 680[46]0.  */
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 846f975..47502d5 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -28,6 +28,7 @@
 #include <linux/a.out.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
+#include <linux/fs.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
diff --git a/arch/m68knommu/kernel/sys_m68k.c b/arch/m68knommu/kernel/sys_m68k.c
index 48e6b33..15d62c5 100644
--- a/arch/m68knommu/kernel/sys_m68k.c
+++ b/arch/m68knommu/kernel/sys_m68k.c
@@ -18,6 +18,7 @@
 #include <linux/mman.h>
 #include <linux/file.h>
 #include <linux/utsname.h>
+#include <linux/fs.h>
 
 #include <asm/setup.h>
 #include <asm/uaccess.h>
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index aff661f..0eabe73 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -612,6 +612,8 @@
 	ubd_dev->fd = fd;
 
 	if(ubd_dev->cow.file != NULL){
+		blk_queue_max_sectors(ubd_dev->queue, 8 * sizeof(long));
+
 		err = -ENOMEM;
 		ubd_dev->cow.bitmap = (void *) vmalloc(ubd_dev->cow.bitmap_len);
 		if(ubd_dev->cow.bitmap == NULL){
@@ -712,8 +714,6 @@
 	ubd_dev->queue->queuedata = ubd_dev;
 
 	blk_queue_max_hw_segments(ubd_dev->queue, MAX_SG);
-	if(ubd_dev->cow.file != NULL)
-		blk_queue_max_sectors(ubd_dev->queue, 8 * sizeof(long));
 	err = ubd_disk_register(MAJOR_NR, ubd_dev->size, n, &ubd_gendisk[n]);
 	if(err){
 		*error_out = "Failed to register device";
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 430673b..7225124 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -587,7 +587,7 @@
 	itdev->want[1][1] = ATA_ANY;
 	itdev->last_device = -1;
 
-	if (pdev->revision == 0x11) {
+	if (pdev->revision == 0x10) {
 		itdev->timing10 = 1;
 		/* Need to disable ATAPI DMA for this case */
 		if (!itdev->smart)
diff --git a/drivers/auxdisplay/cfag12864b.c b/drivers/auxdisplay/cfag12864b.c
index cb44cb4..80bb061 100644
--- a/drivers/auxdisplay/cfag12864b.c
+++ b/drivers/auxdisplay/cfag12864b.c
@@ -355,7 +355,7 @@
 
 	cfag12864b_cache = kmalloc(sizeof(unsigned char) *
 		CFAG12864B_SIZE, GFP_KERNEL);
-	if (cfag12864b_buffer == NULL) {
+	if (cfag12864b_cache == NULL) {
 		printk(KERN_ERR CFAG12864B_NAME ": ERROR: "
 			"can't alloc cache buffer (%i bytes)\n",
 			CFAG12864B_SIZE);
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index ef32e97..4245b7f 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -68,6 +68,7 @@
 config BLK_DEV_XD
 	tristate "XT hard disk support"
 	depends on ISA && ISA_DMA_API
+	select CHECK_SIGNATURE
 	help
 	  Very old 8 bit hard disk controllers used in the IBM XT computer
 	  will be supported if you say Y here.
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 96d2f9e..9b07f785 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2292,7 +2292,7 @@
 	info->irq		= irq_of_parse_and_map(dev->node, 0);
 	info->dev		= &dev->dev;
 
-	dev_dbg(&dev->dev, "addr 0x%lx regsize %ld spacing %ld irq %x\n",
+	dev_dbg(&dev->dev, "addr 0x%lx regsize %d spacing %d irq %x\n",
 		info->io.addr_data, info->io.regsize, info->io.regspacing,
 		info->irq);
 
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 2ce0af1..d95f316 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -1022,10 +1022,6 @@
 	308,310,313,314,315,317,318,319,320,357,322,323,324,325,276,330,
 	332,340,365,342,343,344,345,346,356,270,341,368,369,370,371,372 };
 
-#ifdef CONFIG_MAC_EMUMOUSEBTN
-extern int mac_hid_mouse_emulate_buttons(int, int, int);
-#endif /* CONFIG_MAC_EMUMOUSEBTN */
-
 #ifdef CONFIG_SPARC
 static int sparc_l1_a_state = 0;
 extern void sun_do_break(void);
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index bbb7f12..2f97d2f 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -1565,6 +1565,9 @@
 	int rc;
 	unsigned long flags;
 
+	if (!try_module_get(THIS_MODULE))
+		return -EBUSY;
+
 	DBGINFO(("%s hdlcdev_open\n", dev->name));
 
 	/* generic HDLC layer open processing */
@@ -1634,6 +1637,7 @@
 	info->netcount=0;
 	spin_unlock_irqrestore(&info->netlock, flags);
 
+	module_put(THIS_MODULE);
 	return 0;
 }
 
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 9bb5429..39564b7 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -7,7 +7,7 @@
  * Reiner Sailer <sailer@watson.ibm.com>
  * Kylene Hall <kjhall@us.ibm.com>
  *
- * Maintained by: <tpmdd_devel@lists.sourceforge.net>
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
  *
  * Device driver for TCG/TCPA TPM (trusted platform module).
  * Specifications at www.trustedcomputinggroup.org	 
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index b2e2b00..d15ccdd 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -7,7 +7,7 @@
  * Reiner Sailer <sailer@watson.ibm.com>
  * Kylene Hall <kjhall@us.ibm.com>
  *
- * Maintained by: <tpmdd_devel@lists.sourceforge.net>
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
  *
  * Device driver for TCG/TCPA TPM (trusted platform module).
  * Specifications at www.trustedcomputinggroup.org	 
diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c
index 1ab0896..d0e7926 100644
--- a/drivers/char/tpm/tpm_atmel.c
+++ b/drivers/char/tpm/tpm_atmel.c
@@ -7,7 +7,7 @@
  * Reiner Sailer <sailer@watson.ibm.com>
  * Kylene Hall <kjhall@us.ibm.com>
  *
- * Maintained by: <tpmdd_devel@lists.sourceforge.net>
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
  *
  * Device driver for TCG/TCPA TPM (trusted platform module).
  * Specifications at www.trustedcomputinggroup.org	 
diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h
index 9363bcf..6c831f9 100644
--- a/drivers/char/tpm/tpm_atmel.h
+++ b/drivers/char/tpm/tpm_atmel.h
@@ -4,7 +4,7 @@
  * Authors:
  * Kylene Hall <kjhall@us.ibm.com>
  *
- * Maintained by: <tpmdd_devel@lists.sourceforge.net>
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
  *
  * Device driver for TCG/TCPA TPM (trusted platform module).
  * Specifications at www.trustedcomputinggroup.org
diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c
index 8677fc6..60a2d26 100644
--- a/drivers/char/tpm/tpm_bios.c
+++ b/drivers/char/tpm/tpm_bios.c
@@ -7,6 +7,8 @@
  *	Reiner Sailer <sailer@watson.ibm.com>
  *	Kylene Hall <kjhall@us.ibm.com>
  *
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
+ *
  * Access to the eventlog extended by the TCG BIOS of PC platform
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c
index 608f730..6313326 100644
--- a/drivers/char/tpm/tpm_nsc.c
+++ b/drivers/char/tpm/tpm_nsc.c
@@ -7,7 +7,7 @@
  * Reiner Sailer <sailer@watson.ibm.com>
  * Kylene Hall <kjhall@us.ibm.com>
  *
- * Maintained by: <tpmdd_devel@lists.sourceforge.net>
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
  *
  * Device driver for TCG/TCPA TPM (trusted platform module).
  * Specifications at www.trustedcomputinggroup.org	 
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 483f3f6..23fa18a 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -5,6 +5,8 @@
  * Leendert van Doorn <leendert@watson.ibm.com>
  * Kylene Hall <kjhall@us.ibm.com>
  *
+ * Maintained by: <tpmdd-devel@lists.sourceforge.net>
+ *
  * Device driver for TCG/TCPA TPM (trusted platform module).
  * Specifications at www.trustedcomputinggroup.org
  *
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 9b26574..d602b8f 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -68,6 +68,7 @@
 	select INPUT_POLLDEV
 	select NEW_LEDS
 	select LEDS_CLASS
+	select CHECK_SIGNATURE
 	help
 	  Say Y here for support of Winstron laptop button interface, used on
 	  laptops of various brands, including Acer and Fujitsu-Siemens. If
diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig
index fd6925f..41e2250 100644
--- a/drivers/lguest/Kconfig
+++ b/drivers/lguest/Kconfig
@@ -1,6 +1,6 @@
 config LGUEST
 	tristate "Linux hypervisor example code"
-	depends on X86 && PARAVIRT && EXPERIMENTAL && !X86_PAE
+	depends on X86 && PARAVIRT && EXPERIMENTAL && !X86_PAE && FUTEX
 	select LGUEST_GUEST
 	select HVC_DRIVER
 	---help---
diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c
index 76c1e8e..33dee3a 100644
--- a/drivers/macintosh/mac_hid.c
+++ b/drivers/macintosh/mac_hid.c
@@ -13,6 +13,7 @@
 #include <linux/sysctl.h>
 #include <linux/input.h>
 #include <linux/module.h>
+#include <linux/kbd_kern.h>
 
 
 static struct input_dev *emumousebtn;
diff --git a/drivers/macintosh/via-pmu68k.c b/drivers/macintosh/via-pmu68k.c
index dfdf11c..e2f84da 100644
--- a/drivers/macintosh/via-pmu68k.c
+++ b/drivers/macintosh/via-pmu68k.c
@@ -818,243 +818,3 @@
 {
 	return (pmu_kind != PMU_UNKNOWN);
 }
-
-#if 0 /* needs some work for 68K */
-
-/*
- * This struct is used to store config register values for
- * PCI devices which may get powered off when we sleep.
- */
-static struct pci_save {
-	u16	command;
-	u16	cache_lat;
-	u16	intr;
-} *pbook_pci_saves;
-static int n_pbook_pci_saves;
-
-static inline void
-pbook_pci_save(void)
-{
-	int npci;
-	struct pci_dev *pd = NULL;
-	struct pci_save *ps;
-
-	npci = 0;
-	while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL)
-		++npci;
-	n_pbook_pci_saves = npci;
-	if (npci == 0)
-		return;
-	ps = kmalloc(npci * sizeof(*ps), GFP_KERNEL);
-	pbook_pci_saves = ps;
-	if (ps == NULL)
-		return;
-
-	pd = NULL;
-	while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
-		pci_read_config_word(pd, PCI_COMMAND, &ps->command);
-		pci_read_config_word(pd, PCI_CACHE_LINE_SIZE, &ps->cache_lat);
-		pci_read_config_word(pd, PCI_INTERRUPT_LINE, &ps->intr);
-		++ps;
-		--npci;
-	}
-}
-
-static inline void
-pbook_pci_restore(void)
-{
-	u16 cmd;
-	struct pci_save *ps = pbook_pci_saves;
-	struct pci_dev *pd = NULL;
-	int j;
-
-	while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
-		if (ps->command == 0)
-			continue;
-		pci_read_config_word(pd, PCI_COMMAND, &cmd);
-		if ((ps->command & ~cmd) == 0)
-			continue;
-		switch (pd->hdr_type) {
-		case PCI_HEADER_TYPE_NORMAL:
-			for (j = 0; j < 6; ++j)
-				pci_write_config_dword(pd,
-					PCI_BASE_ADDRESS_0 + j*4,
-					pd->resource[j].start);
-			pci_write_config_dword(pd, PCI_ROM_ADDRESS,
-			       pd->resource[PCI_ROM_RESOURCE].start);
-			pci_write_config_word(pd, PCI_CACHE_LINE_SIZE,
-				ps->cache_lat);
-			pci_write_config_word(pd, PCI_INTERRUPT_LINE,
-				ps->intr);
-			pci_write_config_word(pd, PCI_COMMAND, ps->command);
-			break;
-			/* other header types not restored at present */
-		}
-	}
-}
-
-/*
- * Put the powerbook to sleep.
- */
-#define IRQ_ENABLE	((unsigned int *)0xf3000024)
-#define MEM_CTRL	((unsigned int *)0xf8000070)
-
-int powerbook_sleep(void)
-{
-	int ret, i, x;
-	static int save_backlight;
-	static unsigned int save_irqen;
-	unsigned long msr;
-	unsigned int hid0;
-	unsigned long p, wait;
-	struct adb_request sleep_req;
-
-	/* Notify device drivers */
-	ret = blocking_notifier_call_chain(&sleep_notifier_list,
-			PBOOK_SLEEP, NULL);
-	if (ret & NOTIFY_STOP_MASK)
-		return -EBUSY;
-
-	/* Sync the disks. */
-	/* XXX It would be nice to have some way to ensure that
-	 * nobody is dirtying any new buffers while we wait. */
-	sys_sync();
-
-	/* Turn off the display backlight */
-	save_backlight = backlight_enabled;
-	if (save_backlight)
-		pmu_enable_backlight(0);
-
-	/* Give the disks a little time to actually finish writing */
-	for (wait = jiffies + (HZ/4); time_before(jiffies, wait); )
-		mb();
-
-	/* Disable all interrupts except pmu */
-	save_irqen = in_le32(IRQ_ENABLE);
-	for (i = 0; i < 32; ++i)
-		if (i != vias->intrs[0].line && (save_irqen & (1 << i)))
-			disable_irq(i);
-	asm volatile("mtdec %0" : : "r" (0x7fffffff));
-
-	/* Save the state of PCI config space for some slots */
-	pbook_pci_save();
-
-	/* Set the memory controller to keep the memory refreshed
-	   while we're asleep */
-	for (i = 0x403f; i >= 0x4000; --i) {
-		out_be32(MEM_CTRL, i);
-		do {
-			x = (in_be32(MEM_CTRL) >> 16) & 0x3ff;
-		} while (x == 0);
-		if (x >= 0x100)
-			break;
-	}
-
-	/* Ask the PMU to put us to sleep */
-	pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
-	while (!sleep_req.complete)
-		mb();
-	/* displacement-flush the L2 cache - necessary? */
-	for (p = KERNELBASE; p < KERNELBASE + 0x100000; p += 0x1000)
-		i = *(volatile int *)p;
-	asleep = 1;
-
-	/* Put the CPU into sleep mode */
-	asm volatile("mfspr %0,1008" : "=r" (hid0) :);
-	hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP;
-	asm volatile("mtspr 1008,%0" : : "r" (hid0));
-	local_save_flags(msr);
-	msr |= MSR_POW | MSR_EE;
-	local_irq_restore(msr);
-	udelay(10);
-
-	/* OK, we're awake again, start restoring things */
-	out_be32(MEM_CTRL, 0x3f);
-	pbook_pci_restore();
-
-	/* wait for the PMU interrupt sequence to complete */
-	while (asleep)
-		mb();
-
-	/* reenable interrupts */
-	for (i = 0; i < 32; ++i)
-		if (i != vias->intrs[0].line && (save_irqen & (1 << i)))
-			enable_irq(i);
-
-	/* Notify drivers */
-	blocking_notifier_call_chain(&sleep_notifier_list, PBOOK_WAKE, NULL);
-
-	/* reenable ADB autopoll */
-	pmu_adb_autopoll(adb_dev_map);
-
-	/* Turn on the screen backlight, if it was on before */
-	if (save_backlight)
-		pmu_enable_backlight(1);
-
-	/* Wait for the hard disk to spin up */
-
-	return 0;
-}
-
-/*
- * Support for /dev/pmu device
- */
-static int pmu_open(struct inode *inode, struct file *file)
-{
-	return 0;
-}
-
-static ssize_t pmu_read(struct file *file, char *buf,
-			size_t count, loff_t *ppos)
-{
-	return 0;
-}
-
-static ssize_t pmu_write(struct file *file, const char *buf,
-			 size_t count, loff_t *ppos)
-{
-	return 0;
-}
-
-static int pmu_ioctl(struct inode * inode, struct file *filp,
-		     u_int cmd, u_long arg)
-{
-	int error;
-	__u32 value;
-
-	switch (cmd) {
-	    case PMU_IOC_SLEEP:
-	    	return -ENOSYS;
-	    case PMU_IOC_GET_BACKLIGHT:
-		return put_user(backlight_level, (__u32 *)arg);
-	    case PMU_IOC_SET_BACKLIGHT:
-		error = get_user(value, (__u32 *)arg);
-		if (!error)
-			pmu_set_brightness(value);
-		return error;
-	    case PMU_IOC_GET_MODEL:
-	    	return put_user(pmu_kind, (__u32 *)arg);
-	}
-	return -EINVAL;
-}
-
-static const struct file_operations pmu_device_fops = {
-	.read		= pmu_read,
-	.write		= pmu_write,
-	.ioctl		= pmu_ioctl,
-	.open		= pmu_open,
-};
-
-static struct miscdevice pmu_device = {
-	PMU_MINOR, "pmu", &pmu_device_fops
-};
-
-void pmu_device_init(void)
-{
-	if (!via)
-		return;
-	if (misc_register(&pmu_device) < 0)
-		printk(KERN_ERR "via-pmu68k: cannot register misc device.\n");
-}
-#endif /* CONFIG_PMAC_PBOOK */
-
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 650991b..f33a729 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1972,7 +1972,8 @@
 		    !test_bit(In_sync, &disk->rdev->flags)) {
 			disk->head_position = 0;
 			mddev->degraded++;
-			conf->fullsync = 1;
+			if (disk->rdev)
+				conf->fullsync = 1;
 		}
 	}
 	if (mddev->degraded == conf->raid_disks) {
@@ -2153,11 +2154,25 @@
 	oldpool = conf->r1bio_pool;
 	conf->r1bio_pool = newpool;
 
-	for (d=d2=0; d < conf->raid_disks; d++)
-		if (conf->mirrors[d].rdev) {
-			conf->mirrors[d].rdev->raid_disk = d2;
-			newmirrors[d2++].rdev = conf->mirrors[d].rdev;
+	for (d = d2 = 0; d < conf->raid_disks; d++) {
+		mdk_rdev_t *rdev = conf->mirrors[d].rdev;
+		if (rdev && rdev->raid_disk != d2) {
+			char nm[20];
+			sprintf(nm, "rd%d", rdev->raid_disk);
+			sysfs_remove_link(&mddev->kobj, nm);
+			rdev->raid_disk = d2;
+			sprintf(nm, "rd%d", rdev->raid_disk);
+			sysfs_remove_link(&mddev->kobj, nm);
+			if (sysfs_create_link(&mddev->kobj,
+					      &rdev->kobj, nm))
+				printk(KERN_WARNING
+				       "md/raid1: cannot register "
+				       "%s for %s\n",
+				       nm, mdname(mddev));
 		}
+		if (rdev)
+			newmirrors[d2++].rdev = rdev;
+	}
 	kfree(conf->mirrors);
 	conf->mirrors = newmirrors;
 	kfree(conf->poolinfo);
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 2c7b158..40307f3 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1772,6 +1772,7 @@
 	if (dev->alt_max_pkt_size == NULL) {
 		em28xx_errdev("out of memory!\n");
 		em28xx_devused&=~(1<<nr);
+		kfree(dev);
 		return -ENOMEM;
 	}
 
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 9c0e8d1..3d81966 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -1196,12 +1196,19 @@
 	return 0;
 }
 
+
+static void pwc_cleanup(struct pwc_device *pdev)
+{
+	pwc_remove_sysfs_files(pdev->vdev);
+	video_unregister_device(pdev->vdev);
+}
+
 /* Note that all cleanup is done in the reverse order as in _open */
 static int pwc_video_close(struct inode *inode, struct file *file)
 {
 	struct video_device *vdev = file->private_data;
 	struct pwc_device *pdev;
-	int i;
+	int i, hint;
 
 	PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev);
 
@@ -1224,8 +1231,9 @@
 	pwc_isoc_cleanup(pdev);
 	pwc_free_buffers(pdev);
 
+	lock_kernel();
 	/* Turn off LEDS and power down camera, but only when not unplugged */
-	if (pdev->error_status != EPIPE) {
+	if (!pdev->unplugged) {
 		/* Turn LEDs off */
 		if (pwc_set_leds(pdev, 0, 0) < 0)
 			PWC_DEBUG_MODULE("Failed to set LED on/off time.\n");
@@ -1234,9 +1242,19 @@
 			if (i < 0)
 				PWC_ERROR("Failed to power down camera (%d)\n", i);
 		}
+		pdev->vopen--;
+		PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", i);
+	} else {
+		pwc_cleanup(pdev);
+		/* Free memory (don't set pdev to 0 just yet) */
+		kfree(pdev);
+		/* search device_hint[] table if we occupy a slot, by any chance */
+		for (hint = 0; hint < MAX_DEV_HINTS; hint++)
+			if (device_hint[hint].pdev == pdev)
+				device_hint[hint].pdev = NULL;
 	}
-	pdev->vopen--;
-	PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", pdev->vopen);
+	unlock_kernel();
+
 	return 0;
 }
 
@@ -1791,21 +1809,21 @@
 	/* Alert waiting processes */
 	wake_up_interruptible(&pdev->frameq);
 	/* Wait until device is closed */
-	while (pdev->vopen)
-		schedule();
-	/* Device is now closed, so we can safely unregister it */
-	PWC_DEBUG_PROBE("Unregistering video device in disconnect().\n");
-	pwc_remove_sysfs_files(pdev->vdev);
-	video_unregister_device(pdev->vdev);
-
-	/* Free memory (don't set pdev to 0 just yet) */
-	kfree(pdev);
+	if(pdev->vopen) {
+		pdev->unplugged = 1;
+	} else {
+		/* Device is closed, so we can safely unregister it */
+		PWC_DEBUG_PROBE("Unregistering video device in disconnect().\n");
+		pwc_cleanup(pdev);
+		/* Free memory (don't set pdev to 0 just yet) */
+		kfree(pdev);
 
 disconnect_out:
-	/* search device_hint[] table if we occupy a slot, by any chance */
-	for (hint = 0; hint < MAX_DEV_HINTS; hint++)
-		if (device_hint[hint].pdev == pdev)
-			device_hint[hint].pdev = NULL;
+		/* search device_hint[] table if we occupy a slot, by any chance */
+		for (hint = 0; hint < MAX_DEV_HINTS; hint++)
+			if (device_hint[hint].pdev == pdev)
+				device_hint[hint].pdev = NULL;
+	}
 
 	unlock_kernel();
 }
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index 910a04f..8e8e5b2 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -193,6 +193,7 @@
    char vsnapshot;		/* snapshot mode */
    char vsync;			/* used by isoc handler */
    char vmirror;		/* for ToUCaM series */
+	char unplugged;
 
    int cmd_len;
    unsigned char cmd_buf[13];
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 80c4a84..1cb33ca 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -892,7 +892,7 @@
 
 static struct i2c_driver m41t80_driver = {
 	.driver = {
-		.name = "m41t80",
+		.name = "rtc-m41t80",
 	},
 	.probe = m41t80_probe,
 	.remove = m41t80_remove,
diff --git a/drivers/rtc/rtc-max6902.c b/drivers/rtc/rtc-max6902.c
index d941707..3e183cf 100644
--- a/drivers/rtc/rtc-max6902.c
+++ b/drivers/rtc/rtc-max6902.c
@@ -13,7 +13,7 @@
  *
  * 24-May-2006: Raphael Assenat <raph@8d.com>
  *                - Major rework
- *   				Converted to rtc_device and uses the SPI layer.
+ *				Converted to rtc_device and uses the SPI layer.
  *
  * ??-???-2005: Someone at Compulab
  *                - Initial driver creation.
@@ -259,11 +259,11 @@
 
 static struct spi_driver max6902_driver = {
 	.driver = {
-		.name 	= "max6902",
+		.name	= "rtc-max6902",
 		.bus	= &spi_bus_type,
 		.owner	= THIS_MODULE,
 	},
-	.probe 	= max6902_probe,
+	.probe	= max6902_probe,
 	.remove = __devexit_p(max6902_remove),
 };
 
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index d2b3898..6f2c71e 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -367,6 +367,7 @@
 config SCSI_7000FASST
 	tristate "7000FASST SCSI support"
 	depends on ISA && SCSI && ISA_DMA_API
+	select CHECK_SIGNATURE
 	help
 	  This driver supports the Western Digital 7000 SCSI host adapter
 	  family.  Some information is in the source:
@@ -388,6 +389,7 @@
 	tristate "Adaptec AHA152X/2825 support"
 	depends on ISA && SCSI && !64BIT
 	select SCSI_SPI_ATTRS
+	select CHECK_SIGNATURE
 	---help---
 	  This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
 	  SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
@@ -583,6 +585,7 @@
 	tristate "DTC3180/3280 SCSI support"
 	depends on ISA && SCSI
 	select SCSI_SPI_ATTRS
+	select CHECK_SIGNATURE
 	help
 	  This is support for DTC 3180/3280 SCSI Host Adapters.  Please read
 	  the SCSI-HOWTO, available from
@@ -657,6 +660,7 @@
 config SCSI_FUTURE_DOMAIN
 	tristate "Future Domain 16xx SCSI/AHA-2920A support"
 	depends on (ISA || PCI) && SCSI
+	select CHECK_SIGNATURE
 	---help---
 	  This is support for Future Domain's 16-bit SCSI host adapters
 	  (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and
@@ -1324,6 +1328,7 @@
 config SCSI_SEAGATE
 	tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
 	depends on X86 && ISA && SCSI
+	select CHECK_SIGNATURE
 	---help---
 	  These are 8-bit SCSI controllers; the ST-01 is also supported by
 	  this driver.  It is explained in section 3.9 of the SCSI-HOWTO,
@@ -1397,6 +1402,7 @@
 	tristate "Trantor T128/T128F/T228 SCSI support"
 	depends on ISA && SCSI
 	select SCSI_SPI_ATTRS
+	select CHECK_SIGNATURE
 	---help---
 	  This is support for a SCSI host adapter. It is explained in section
 	  3.11 of the SCSI-HOWTO, available from
@@ -1561,7 +1567,7 @@
 	  built-in SCSI controller, say Y. Otherwise, say N.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called wd33c93.
+	  module will be called a3000.
 
 config A2091_SCSI
 	tristate "A2091/A590 WD33C93A support"
@@ -1571,7 +1577,7 @@
 	  say N.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called wd33c93.
+	  module will be called a2091.
 
 config GVP11_SCSI
 	tristate "GVP Series II WD33C93A support"
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 3013130..f94109c 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -129,7 +129,16 @@
 	unsigned char		mcr;
 	unsigned char		mcr_mask;	/* mask of user bits */
 	unsigned char		mcr_force;	/* mask of forced bits */
-	unsigned char		lsr_break_flag;
+
+	/*
+	 * Some bits in registers are cleared on a read, so they must
+	 * be saved whenever the register is read but the bits will not
+	 * be immediately processed.
+	 */
+#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
+	unsigned char		lsr_saved_flags;
+#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
+	unsigned char		msr_saved_flags;
 
 	/*
 	 * We provide a per-port pm hook.
@@ -1238,6 +1247,7 @@
 		if (up->bugs & UART_BUG_TXEN) {
 			unsigned char lsr, iir;
 			lsr = serial_in(up, UART_LSR);
+			up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
 			iir = serial_in(up, UART_IIR) & 0x0f;
 			if ((up->port.type == PORT_RM9000) ?
 				(lsr & UART_LSR_THRE &&
@@ -1290,18 +1300,10 @@
 		flag = TTY_NORMAL;
 		up->port.icount.rx++;
 
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-		/*
-		 * Recover the break flag from console xmit
-		 */
-		if (up->port.line == up->port.cons->index) {
-			lsr |= up->lsr_break_flag;
-			up->lsr_break_flag = 0;
-		}
-#endif
+		lsr |= up->lsr_saved_flags;
+		up->lsr_saved_flags = 0;
 
-		if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
-				    UART_LSR_FE | UART_LSR_OE))) {
+		if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
 			/*
 			 * For statistics only
 			 */
@@ -1392,6 +1394,8 @@
 {
 	unsigned int status = serial_in(up, UART_MSR);
 
+	status |= up->msr_saved_flags;
+	up->msr_saved_flags = 0;
 	if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
 	    up->port.info != NULL) {
 		if (status & UART_MSR_TERI)
@@ -1591,7 +1595,8 @@
 static void serial8250_backup_timeout(unsigned long data)
 {
 	struct uart_8250_port *up = (struct uart_8250_port *)data;
-	unsigned int iir, ier = 0;
+	unsigned int iir, ier = 0, lsr;
+	unsigned long flags;
 
 	/*
 	 * Must disable interrupts or else we risk racing with the interrupt
@@ -1610,9 +1615,13 @@
 	 * the "Diva" UART used on the management processor on many HP
 	 * ia64 and parisc boxes.
 	 */
+	spin_lock_irqsave(&up->port.lock, flags);
+	lsr = serial_in(up, UART_LSR);
+	up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+	spin_unlock_irqrestore(&up->port.lock, flags);
 	if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
 	    (!uart_circ_empty(&up->port.info->xmit) || up->port.x_char) &&
-	    (serial_in(up, UART_LSR) & UART_LSR_THRE)) {
+	    (lsr & UART_LSR_THRE)) {
 		iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
 		iir |= UART_IIR_THRI;
 	}
@@ -1631,13 +1640,14 @@
 {
 	struct uart_8250_port *up = (struct uart_8250_port *)port;
 	unsigned long flags;
-	unsigned int ret;
+	unsigned int lsr;
 
 	spin_lock_irqsave(&up->port.lock, flags);
-	ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+	lsr = serial_in(up, UART_LSR);
+	up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
 	spin_unlock_irqrestore(&up->port.lock, flags);
 
-	return ret;
+	return lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
 }
 
 static unsigned int serial8250_get_mctrl(struct uart_port *port)
@@ -1708,8 +1718,7 @@
 	do {
 		status = serial_in(up, UART_LSR);
 
-		if (status & UART_LSR_BI)
-			up->lsr_break_flag = UART_LSR_BI;
+		up->lsr_saved_flags |= status & LSR_SAVE_FLAGS;
 
 		if (--tmout == 0)
 			break;
@@ -1718,8 +1727,12 @@
 
 	/* Wait up to 1s for flow control if necessary */
 	if (up->port.flags & UPF_CONS_FLOW) {
-		tmout = 1000000;
-		while (!(serial_in(up, UART_MSR) & UART_MSR_CTS) && --tmout) {
+		unsigned int tmout;
+		for (tmout = 1000000; tmout; tmout--) {
+			unsigned int msr = serial_in(up, UART_MSR);
+			up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
+			if (msr & UART_MSR_CTS)
+				break;
 			udelay(1);
 			touch_nmi_watchdog();
 		}
@@ -1889,6 +1902,18 @@
 	spin_unlock_irqrestore(&up->port.lock, flags);
 
 	/*
+	 * Clear the interrupt registers again for luck, and clear the
+	 * saved flags to avoid getting false values from polling
+	 * routines or the previous session.
+	 */
+	serial_inp(up, UART_LSR);
+	serial_inp(up, UART_RX);
+	serial_inp(up, UART_IIR);
+	serial_inp(up, UART_MSR);
+	up->lsr_saved_flags = 0;
+	up->msr_saved_flags = 0;
+
+	/*
 	 * Finally, enable interrupts.  Note: Modem status interrupts
 	 * are set via set_termios(), which will be occurring imminently
 	 * anyway, so we don't enable them here.
@@ -1906,14 +1931,6 @@
 		(void) inb_p(icp);
 	}
 
-	/*
-	 * And clear the interrupt registers again for luck.
-	 */
-	(void) serial_inp(up, UART_LSR);
-	(void) serial_inp(up, UART_RX);
-	(void) serial_inp(up, UART_IIR);
-	(void) serial_inp(up, UART_MSR);
-
 	return 0;
 }
 
@@ -2484,6 +2501,16 @@
 	wait_for_xmitr(up, BOTH_EMPTY);
 	serial_out(up, UART_IER, ier);
 
+	/*
+	 *	The receive handling will happen properly because the
+	 *	receive ready bit will still be set; it is not cleared
+	 *	on read.  However, modem control will not, we must
+	 *	call it if we have saved something in the saved flags
+	 *	while processing with interrupts off.
+	 */
+	if (up->msr_saved_flags)
+		check_modem_status(up);
+
 	if (locked)
 		spin_unlock(&up->port.lock);
 	local_irq_restore(flags);
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 5e48587..bd66339 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -580,6 +580,138 @@
 	return num_serial;
 }
 
+/*
+ * ITE support by Niels de Vos <niels.devos@wincor-nixdorf.com>
+ *
+ * These chips are available with optionally one parallel port and up to
+ * two serial ports. Unfortunately they all have the same product id.
+ *
+ * Basic configuration is done over a region of 32 I/O ports. The base
+ * ioport is called INTA or INTC, depending on docs/other drivers.
+ *
+ * The region of the 32 I/O ports is configured in POSIO0R...
+ */
+
+/* registers */
+#define ITE_887x_MISCR		0x9c
+#define ITE_887x_INTCBAR	0x78
+#define ITE_887x_UARTBAR	0x7c
+#define ITE_887x_PS0BAR		0x10
+#define ITE_887x_POSIO0		0x60
+
+/* I/O space size */
+#define ITE_887x_IOSIZE		32
+/* I/O space size (bits 26-24; 8 bytes = 011b) */
+#define ITE_887x_POSIO_IOSIZE_8		(3 << 24)
+/* I/O space size (bits 26-24; 32 bytes = 101b) */
+#define ITE_887x_POSIO_IOSIZE_32	(5 << 24)
+/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */
+#define ITE_887x_POSIO_SPEED		(3 << 29)
+/* enable IO_Space bit */
+#define ITE_887x_POSIO_ENABLE		(1 << 31)
+
+static int __devinit pci_ite887x_init(struct pci_dev *dev)
+{
+	/* inta_addr are the configuration addresses of the ITE */
+	static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0,
+							0x200, 0x280, 0 };
+	int ret, i, type;
+	struct resource *iobase = NULL;
+	u32 miscr, uartbar, ioport;
+
+	/* search for the base-ioport */
+	i = 0;
+	while (inta_addr[i] && iobase == NULL) {
+		iobase = request_region(inta_addr[i], ITE_887x_IOSIZE,
+								"ite887x");
+		if (iobase != NULL) {
+			/* write POSIO0R - speed | size | ioport */
+			pci_write_config_dword(dev, ITE_887x_POSIO0,
+				ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
+				ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
+			/* write INTCBAR - ioport */
+			pci_write_config_dword(dev, ITE_887x_INTCBAR, inta_addr[i]);
+			ret = inb(inta_addr[i]);
+			if (ret != 0xff) {
+				/* ioport connected */
+				break;
+			}
+			release_region(iobase->start, ITE_887x_IOSIZE);
+			iobase = NULL;
+		}
+		i++;
+	}
+
+	if (!inta_addr[i]) {
+		printk(KERN_ERR "ite887x: could not find iobase\n");
+		return -ENODEV;
+	}
+
+	/* start of undocumented type checking (see parport_pc.c) */
+	type = inb(iobase->start + 0x18) & 0x0f;
+
+	switch (type) {
+	case 0x2:	/* ITE8871 (1P) */
+	case 0xa:	/* ITE8875 (1P) */
+		ret = 0;
+		break;
+	case 0xe:	/* ITE8872 (2S1P) */
+		ret = 2;
+		break;
+	case 0x6:	/* ITE8873 (1S) */
+		ret = 1;
+		break;
+	case 0x8:	/* ITE8874 (2S) */
+		ret = 2;
+		break;
+	default:
+		moan_device("Unknown ITE887x", dev);
+		ret = -ENODEV;
+	}
+
+	/* configure all serial ports */
+	for (i = 0; i < ret; i++) {
+		/* read the I/O port from the device */
+		pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)),
+								&ioport);
+		ioport &= 0x0000FF00;	/* the actual base address */
+		pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)),
+			ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
+			ITE_887x_POSIO_IOSIZE_8 | ioport);
+
+		/* write the ioport to the UARTBAR */
+		pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar);
+		uartbar &= ~(0xffff << (16 * i));	/* clear half the reg */
+		uartbar |= (ioport << (16 * i));	/* set the ioport */
+		pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar);
+
+		/* get current config */
+		pci_read_config_dword(dev, ITE_887x_MISCR, &miscr);
+		/* disable interrupts (UARTx_Routing[3:0]) */
+		miscr &= ~(0xf << (12 - 4 * i));
+		/* activate the UART (UARTx_En) */
+		miscr |= 1 << (23 - i);
+		/* write new config with activated UART */
+		pci_write_config_dword(dev, ITE_887x_MISCR, miscr);
+	}
+
+	if (ret <= 0) {
+		/* the device has no UARTs if we get here */
+		release_region(iobase->start, ITE_887x_IOSIZE);
+	}
+
+	return ret;
+}
+
+static void __devexit pci_ite887x_exit(struct pci_dev *dev)
+{
+	u32 ioport;
+	/* the ioport is bit 0-15 in POSIO0R */
+	pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport);
+	ioport &= 0xffff;
+	release_region(ioport, ITE_887x_IOSIZE);
+}
+
 static int
 pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
 		  struct uart_port *port, int idx)
@@ -653,6 +785,18 @@
 		.setup		= pci_default_setup,
 	},
 	/*
+	 * ITE
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_ITE,
+		.device		= PCI_DEVICE_ID_ITE_8872,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_ite887x_init,
+		.setup		= pci_default_setup,
+		.exit		= __devexit_p(pci_ite887x_exit),
+	},
+	/*
 	 * Panacom
 	 */
 	{
@@ -933,6 +1077,7 @@
 
 	pbn_b1_2_1250000,
 
+	pbn_b1_bt_1_115200,
 	pbn_b1_bt_2_921600,
 
 	pbn_b1_1_1382400,
@@ -983,6 +1128,7 @@
 	pbn_exar_XR17C152,
 	pbn_exar_XR17C154,
 	pbn_exar_XR17C158,
+	pbn_pasemi_1682M,
 };
 
 /*
@@ -1211,6 +1357,13 @@
 		.uart_offset	= 8,
 	},
 
+	[pbn_b1_bt_1_115200] = {
+		.flags		= FL_BASE1|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+
 	[pbn_b1_bt_2_921600] = {
 		.flags		= FL_BASE1|FL_BASE_BARS,
 		.num_ports	= 2,
@@ -1498,6 +1651,18 @@
 		.base_baud	= 921600,
 		.uart_offset	= 0x200,
 	},
+	/*
+	 * PA Semi PWRficient PA6T-1682M on-chip UART
+	 */
+	[pbn_pasemi_1682M] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 8333333,
+	},
+};
+
+static const struct pci_device_id softmodem_blacklist[] = {
+	{ PCI_VDEVICE ( AL, 0x5457 ), }, /* ALi Corporation M5457 AC'97 Modem */
 };
 
 /*
@@ -1508,6 +1673,7 @@
 static int __devinit
 serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
 {
+	const struct pci_device_id *blacklist;
 	int num_iomem, num_port, first_port = -1, i;
 	
 	/*
@@ -1522,6 +1688,18 @@
 	    (dev->class & 0xff) > 6)
 		return -ENODEV;
 
+	/*
+	 * Do not access blacklisted devices that are known not to
+	 * feature serial ports.
+	 */
+	for (blacklist = softmodem_blacklist;
+	     blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist);
+	     blacklist++) {
+		if (dev->vendor == blacklist->vendor &&
+		    dev->device == blacklist->device)
+			return -ENODEV;
+	}
+
 	num_iomem = num_port = 0;
 	for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
 		if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
@@ -2364,6 +2542,13 @@
 	{	PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_1_115200 },
+	/*
+	 * ITE
+	 */
+	{	PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0,
+		pbn_b1_bt_1_115200 },
 
 	/*
 	 * IntaShield IS-200
@@ -2382,6 +2567,13 @@
 		PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8,
 		0, 0, pbn_b2_8_921600 },
 	/*
+	 * PA Semi PA6T-1682M on-chip UART
+	 */
+	{	PCI_VENDOR_ID_PASEMI, 0xa004,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_pasemi_1682M },
+
+	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
 	 */
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 030a606..a055f58 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1146,11 +1146,14 @@
 
 	/*
 	 * These are the bits that are used to setup various
-	 * flags in the low level driver.
+	 * flags in the low level driver. We can ignore the Bfoo
+	 * bits in c_cflag; c_[io]speed will always be set
+	 * appropriately by set_termios() in tty_ioctl.c
 	 */
 #define RELEVANT_IFLAG(iflag)	((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
 	if ((cflag ^ old_termios->c_cflag) == 0 &&
+	    tty->termios->c_ospeed == old_termios->c_ospeed &&
+	    tty->termios->c_ispeed == old_termios->c_ispeed &&
 	    RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
 		return;
 
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index b8f91e0..0930e2a 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -37,7 +37,7 @@
 
 #include <asm/io.h>
 
-static char *serial_version = "1.09";
+static char *serial_version = "1.10";
 static char *serial_name = "TX39/49 Serial driver";
 
 #define PASS_LIMIT	256
@@ -436,8 +436,10 @@
 	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
 	unsigned int ret;
 
-	ret =  ((sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS)
-		| ((sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS);
+	/* no modem control lines */
+	ret = TIOCM_CAR | TIOCM_DSR;
+	ret |= (sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS;
+	ret |= (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS;
 
 	return ret;
 }
@@ -557,6 +559,12 @@
 	unsigned long flags;
 	unsigned int baud, quot;
 
+	/*
+	 * We don't support modem control lines.
+	 */
+	termios->c_cflag &= ~(HUPCL | CMSPAR);
+	termios->c_cflag |= CLOCAL;
+
 	cval = sio_in(up, TXX9_SILCR);
 	/* byte size and parity */
 	cval &= ~TXX9_SILCR_UMODE_MASK;
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 6343689..7580aa5d 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -21,6 +21,7 @@
 	default y if USB_ARCH_HAS_EHCI
 	default y if PCMCIA && !M32R			# sl811_cs
 	default y if ARM				# SL-811
+	default y if SUPERH				# r8a66597-hcd
 	default PCI
 
 # many non-PCI SOC chips embed OHCI
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 02c52f8..a73e714 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -456,7 +456,6 @@
 				 int* actual_length)
 {
 	struct timer_list timer;
-	int status = urb->status;
 
 	init_timer(&timer);
 	timer.expires = jiffies + msecs_to_jiffies(CMD_TIMEOUT);
@@ -468,7 +467,7 @@
 
 	if (actual_length)
 		*actual_length = urb->actual_length;
-	return status;
+	return urb->status; /* must read status after completion */
 }
 
 static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index a1a1c9d..29807d0 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -1721,9 +1721,12 @@
 
 	ret = uea_boot(sc);
 	if (ret < 0)
-		goto error;
+		goto error_rm_grp;
 
 	return 0;
+
+error_rm_grp:
+	sysfs_remove_group(&intf->dev.kobj, &attr_grp);
 error:
 	kfree(sc);
 	return ret;
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index fe940e0..f51e224 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -921,6 +921,10 @@
 			return -EINVAL;
 		}
 	}
+
+	/* Accept probe requests only for the control interface */
+	if (intf != control_interface)
+		return -ENODEV;
 	
 	if (usb_interface_claimed(data_interface)) { /* valid in this context */
 		dev_dbg(&intf->dev,"The data interface isn't available");
@@ -1109,10 +1113,12 @@
 		return;
 	}
 	if (acm->country_codes){
-		device_remove_file(&intf->dev, &dev_attr_wCountryCodes);
-		device_remove_file(&intf->dev, &dev_attr_iCountryCodeRelDate);
+		device_remove_file(&acm->control->dev,
+				&dev_attr_wCountryCodes);
+		device_remove_file(&acm->control->dev,
+				&dev_attr_iCountryCodeRelDate);
 	}
-	device_remove_file(&intf->dev, &dev_attr_bmCapabilities);
+	device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities);
 	acm->dev = NULL;
 	usb_set_intfdata(acm->control, NULL);
 	usb_set_intfdata(acm->data, NULL);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 6548574..a1ad11d 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1224,6 +1224,8 @@
 	udev->auto_pm = 1;
 	udev->pm_usage_cnt += inc_usage_cnt;
 	WARN_ON(udev->pm_usage_cnt < 0);
+	if (inc_usage_cnt)
+		udev->last_busy = jiffies;
 	if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) {
 		if (udev->state == USB_STATE_SUSPENDED)
 			status = usb_resume_both(udev);
@@ -1232,8 +1234,6 @@
 		else if (inc_usage_cnt)
 			udev->last_busy = jiffies;
 	} else if (inc_usage_cnt <= 0 && udev->pm_usage_cnt <= 0) {
-		if (inc_usage_cnt)
-			udev->last_busy = jiffies;
 		status = usb_suspend_both(udev, PMSG_SUSPEND);
 	}
 	usb_pm_unlock(udev);
@@ -1342,16 +1342,15 @@
 	else {
 		udev->auto_pm = 1;
 		intf->pm_usage_cnt += inc_usage_cnt;
+		udev->last_busy = jiffies;
 		if (inc_usage_cnt >= 0 && intf->pm_usage_cnt > 0) {
 			if (udev->state == USB_STATE_SUSPENDED)
 				status = usb_resume_both(udev);
 			if (status != 0)
 				intf->pm_usage_cnt -= inc_usage_cnt;
-			else if (inc_usage_cnt)
+			else
 				udev->last_busy = jiffies;
 		} else if (inc_usage_cnt <= 0 && intf->pm_usage_cnt <= 0) {
-			if (inc_usage_cnt)
-				udev->last_busy = jiffies;
 			status = usb_suspend_both(udev, PMSG_SUSPEND);
 		}
 	}
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index e341a1d..f7b337f 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1644,9 +1644,10 @@
 	 * and device drivers will know about any resume quirks.
 	 */
 	if (status == 0) {
+		devstatus = 0;
 		status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
 		if (status >= 0)
-			status = (status == 2 ? 0 : -ENODEV);
+			status = (status > 0 ? 0 : -ENODEV);
 	}
 
 	if (status) {
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b6bd05e..d8f7b08 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -637,12 +637,12 @@
 	memset(buf,0,size);	// Make sure we parse really received data
 
 	for (i = 0; i < 3; ++i) {
-		/* retry on length 0 or stall; some devices are flakey */
+		/* retry on length 0 or error; some devices are flakey */
 		result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 				USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
 				(type << 8) + index, 0, buf, size,
 				USB_CTRL_GET_TIMEOUT);
-		if (result == 0 || result == -EPIPE)
+		if (result <= 0 && result != -ETIMEDOUT)
 			continue;
 		if (result > 1 && ((u8 *)buf)[1] != type) {
 			result = -EPROTO;
@@ -1358,6 +1358,30 @@
 	usb_dev = interface_to_usbdev(intf);
 	alt = intf->cur_altsetting;
 
+#ifdef CONFIG_USB_DEVICEFS
+	if (add_uevent_var(envp, num_envp, &i,
+			   buffer, buffer_size, &length,
+			   "DEVICE=/proc/bus/usb/%03d/%03d",
+			   usb_dev->bus->busnum, usb_dev->devnum))
+		return -ENOMEM;
+#endif
+
+	if (add_uevent_var(envp, num_envp, &i,
+			   buffer, buffer_size, &length,
+			   "PRODUCT=%x/%x/%x",
+			   le16_to_cpu(usb_dev->descriptor.idVendor),
+			   le16_to_cpu(usb_dev->descriptor.idProduct),
+			   le16_to_cpu(usb_dev->descriptor.bcdDevice)))
+		return -ENOMEM;
+
+	if (add_uevent_var(envp, num_envp, &i,
+			   buffer, buffer_size, &length,
+			   "TYPE=%d/%d/%d",
+			   usb_dev->descriptor.bDeviceClass,
+			   usb_dev->descriptor.bDeviceSubClass,
+			   usb_dev->descriptor.bDeviceProtocol))
+		return -ENOMEM;
+
 	if (add_uevent_var(envp, num_envp, &i,
 		   buffer, buffer_size, &length,
 		   "INTERFACE=%d/%d/%d",
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index b7917c5..9e46711 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -30,6 +30,8 @@
 static const struct usb_device_id usb_quirk_list[] = {
 	/* HP 5300/5370C scanner */
 	{ USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 },
+	/* Hewlett-Packard PhotoSmart 720 / PhotoSmart 935 (storage) */
+	{ USB_DEVICE(0x03f0, 0x4002), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
 	/* Acer Peripherals Inc. (now BenQ Corp.) Prisa 640BU */
 	{ USB_DEVICE(0x04a5, 0x207e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
 	/* Benq S2W 3300U */
@@ -56,6 +58,8 @@
 	{ USB_DEVICE(0x04b8, 0x0121), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
 	/* Seiko Epson Corp.*/
 	{ USB_DEVICE(0x04b8, 0x0122), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
+	/* Samsung ML-2010 printer */
+	{ USB_DEVICE(0x04e8, 0x326c), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
 	/* Samsung ML-2510 Series printer */
 	{ USB_DEVICE(0x04e8, 0x327e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
 	/* Elsa MicroLink 56k (V.250) */
@@ -64,12 +68,20 @@
 	{ USB_DEVICE(0x05d8, 0x4005), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
 	/* Agfa Snapscan1212u */
 	{ USB_DEVICE(0x06bd, 0x2061), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
+	/* Seagate RSS LLC */
+	{ USB_DEVICE(0x0bc2, 0x3000), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
 	/* Umax [hex] Astra 3400U */
 	{ USB_DEVICE(0x1606, 0x0060), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
 
 	/* Philips PSC805 audio device */
 	{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Alcor multi-card reader */
+	{ USB_DEVICE(0x058f, 0x6366), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
+
+	/* Canon EOS 5D in PC Connection mode */
+	{ USB_DEVICE(0x04a9, 0x3101), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
+
 	/* RIM Blackberry */
 	{ USB_DEVICE(0x0fca, 0x0001), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
 	{ USB_DEVICE(0x0fca, 0x0004), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index f2fbdc7..d008d13 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -34,8 +34,6 @@
  * bypassing some hardware (and driver) issues.  UML could help too.
  */
 
-#define DEBUG
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index be7a1bd..965ad7b 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -599,7 +599,6 @@
 
 struct fsg_buffhd {
 	void				*buf;
-	dma_addr_t			dma;
 	enum fsg_buffer_state		state;
 	struct fsg_buffhd		*next;
 
@@ -1295,6 +1294,7 @@
 	struct usb_request	*req = fsg->ep0req;
 	int			value = -EOPNOTSUPP;
 	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16                     w_value = le16_to_cpu(ctrl->wValue);
 	u16			w_length = le16_to_cpu(ctrl->wLength);
 
 	if (!fsg->config)
@@ -1308,7 +1308,7 @@
 			if (ctrl->bRequestType != (USB_DIR_OUT |
 					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 				break;
-			if (w_index != 0) {
+			if (w_index != 0 || w_value != 0) {
 				value = -EDOM;
 				break;
 			}
@@ -1324,7 +1324,7 @@
 			if (ctrl->bRequestType != (USB_DIR_IN |
 					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 				break;
-			if (w_index != 0) {
+			if (w_index != 0 || w_value != 0) {
 				value = -EDOM;
 				break;
 			}
@@ -1343,7 +1343,7 @@
 			if (ctrl->bRequestType != (USB_DIR_OUT |
 					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
 				break;
-			if (w_index != 0) {
+			if (w_index != 0 || w_value != 0) {
 				value = -EDOM;
 				break;
 			}
@@ -2611,7 +2611,6 @@
 
 		fsg->intr_buffhd = bh;		// Point to the right buffhd
 		fsg->intreq->buf = bh->inreq->buf;
-		fsg->intreq->dma = bh->inreq->dma;
 		fsg->intreq->context = bh;
 		start_transfer(fsg, fsg->intr_in, fsg->intreq,
 				&fsg->intreq_busy, &bh->state);
@@ -3200,7 +3199,6 @@
 		if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0)
 			goto reset;
 		bh->inreq->buf = bh->outreq->buf = bh->buf;
-		bh->inreq->dma = bh->outreq->dma = bh->dma;
 		bh->inreq->context = bh->outreq->context = bh;
 		bh->inreq->complete = bulk_in_complete;
 		bh->outreq->complete = bulk_out_complete;
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 10b2b33..d57bcfb 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -1277,31 +1277,32 @@
 
 	udc_reset_ep_queue(udc, 0);
 
+	/* We process some stardard setup requests here */
 	switch (setup->bRequest) {
-		/* Request that need Data+Status phase from udc */
 	case USB_REQ_GET_STATUS:
-		if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_STANDARD))
+		/* Data+Status phase from udc */
+		if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
 					!= (USB_DIR_IN | USB_TYPE_STANDARD))
 			break;
 		ch9getstatus(udc, setup->bRequestType, wValue, wIndex, wLength);
-		break;
+		return;
 
-		/* Requests that need Status phase from udc */
 	case USB_REQ_SET_ADDRESS:
+		/* Status phase from udc */
 		if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
 						| USB_RECIP_DEVICE))
 			break;
 		ch9setaddress(udc, wValue, wIndex, wLength);
-		break;
+		return;
 
-		/* Handled by udc, no data, status by udc */
 	case USB_REQ_CLEAR_FEATURE:
 	case USB_REQ_SET_FEATURE:
-	{	/* status transaction */
+		/* Status phase from udc */
+	{
 		int rc = -EOPNOTSUPP;
 
-		if ((setup->bRequestType & USB_RECIP_MASK)
-				== USB_RECIP_ENDPOINT) {
+		if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK))
+				== (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) {
 			int pipe = get_pipe_by_windex(wIndex);
 			struct fsl_ep *ep;
 
@@ -1315,8 +1316,9 @@
 						? 1 : 0);
 			spin_lock(&udc->lock);
 
-		} else if ((setup->bRequestType & USB_RECIP_MASK)
-				== USB_RECIP_DEVICE) {
+		} else if ((setup->bRequestType & (USB_RECIP_MASK
+				| USB_TYPE_MASK)) == (USB_RECIP_DEVICE
+				| USB_TYPE_STANDARD)) {
 			/* Note: The driver has not include OTG support yet.
 			 * This will be set when OTG support is added */
 			if (!udc->gadget.is_otg)
@@ -1329,38 +1331,41 @@
 					USB_DEVICE_A_ALT_HNP_SUPPORT)
 				udc->gadget.a_alt_hnp_support = 1;
 			rc = 0;
-		}
+		} else
+			break;
+
 		if (rc == 0) {
 			if (ep0_prime_status(udc, EP_DIR_IN))
 				ep0stall(udc);
 		}
+		return;
+	}
+
+	default:
 		break;
 	}
-		/* Requests handled by gadget */
-	default:
-		if (wLength) {
-			/* Data phase from gadget, status phase from udc */
-			udc->ep0_dir = (setup->bRequestType & USB_DIR_IN)
-					?  USB_DIR_IN : USB_DIR_OUT;
-			spin_unlock(&udc->lock);
-			if (udc->driver->setup(&udc->gadget,
-					&udc->local_setup_buff) < 0)
-				ep0stall(udc);
-			spin_lock(&udc->lock);
-			udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
-					?  DATA_STATE_XMIT : DATA_STATE_RECV;
 
-		} else {
-			/* No data phase, IN status from gadget */
-			udc->ep0_dir = USB_DIR_IN;
-			spin_unlock(&udc->lock);
-			if (udc->driver->setup(&udc->gadget,
-					&udc->local_setup_buff) < 0)
-				ep0stall(udc);
-			spin_lock(&udc->lock);
-			udc->ep0_state = WAIT_FOR_OUT_STATUS;
-		}
-		break;
+	/* Requests handled by gadget */
+	if (wLength) {
+		/* Data phase from gadget, status phase from udc */
+		udc->ep0_dir = (setup->bRequestType & USB_DIR_IN)
+				?  USB_DIR_IN : USB_DIR_OUT;
+		spin_unlock(&udc->lock);
+		if (udc->driver->setup(&udc->gadget,
+				&udc->local_setup_buff) < 0)
+			ep0stall(udc);
+		spin_lock(&udc->lock);
+		udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
+				?  DATA_STATE_XMIT : DATA_STATE_RECV;
+	} else {
+		/* No data phase, IN status from gadget */
+		udc->ep0_dir = USB_DIR_IN;
+		spin_unlock(&udc->lock);
+		if (udc->driver->setup(&udc->gadget,
+				&udc->local_setup_buff) < 0)
+			ep0stall(udc);
+		spin_lock(&udc->lock);
+		udc->ep0_state = WAIT_FOR_OUT_STATUS;
 	}
 }
 
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 72b4ebb..1407ad1 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -967,7 +967,7 @@
 	udc = container_of(_gadget, struct pxa2xx_udc, gadget);
 
 	/* not all boards support pullup control */
-	if (!udc->mach->udc_command)
+	if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
 		return -EOPNOTSUPP;
 
 	is_active = (is_active != 0);
@@ -2309,7 +2309,7 @@
 {
 	struct pxa2xx_udc	*udc = platform_get_drvdata(dev);
 
-	if (!udc->mach->udc_command)
+	if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
 		WARN("USB host won't detect disconnect!\n");
 	pullup(udc, 0);
 
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2f52982..565d6ef 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -237,7 +237,7 @@
 	  module will be called "sl811_cs".
 
 config USB_R8A66597_HCD
-	tristate "R8A66597 HCD suppoort"
+	tristate "R8A66597 HCD support"
 	depends on USB
 	help
 	  The R8A66597 is a USB 2.0 host and peripheral controller.
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 5d1b12a..b1d1926 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -1,8 +1,6 @@
 /*
  * EHCI HCD (Host Controller Driver) for USB.
  *
- * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
  * Bus Glue for AMD Alchemy Au1xxx
  *
  * Based on "ohci-au1xxx.c" by Matt Porter <mporter@kernel.crashing.org>
@@ -196,6 +194,9 @@
 
 	/*
 	 * basic lifecycle operations
+	 *
+	 * FIXME -- ehci_init() doesn't do enough here.
+	 * See ehci-ppc-soc for a complete implementation.
 	 */
 	.reset = ehci_init,
 	.start = ehci_run,
diff --git a/drivers/usb/host/ehci-ppc-soc.c b/drivers/usb/host/ehci-ppc-soc.c
index c2cedb0..4f99b0e 100644
--- a/drivers/usb/host/ehci-ppc-soc.c
+++ b/drivers/usb/host/ehci-ppc-soc.c
@@ -6,7 +6,7 @@
  * Bus Glue for PPC On-Chip EHCI driver
  * Tested on AMCC 440EPx
  *
- * Based on "ehci-au12xx.c" by David Brownell <dbrownell@users.sourceforge.net>
+ * Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@amd.com>
  *
  * This file is licenced under the GPL.
  */
@@ -15,6 +15,24 @@
 
 extern int usb_disabled(void);
 
+/* called during probe() after chip reset completes */
+static int ehci_ppc_soc_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+	int		retval;
+
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci->sbrn = 0x20;
+	return ehci_reset(ehci);
+}
+
 /**
  * usb_ehci_ppc_soc_probe - initialize PPC-SoC-based HCDs
  * Context: !in_interrupt()
@@ -120,7 +138,7 @@
 	/*
 	 * basic lifecycle operations
 	 */
-	.reset = ehci_init,
+	.reset = ehci_ppc_soc_setup,
 	.start = ehci_run,
 	.stop = ehci_stop,
 	.shutdown = ehci_shutdown,
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 6f9e43e..f61c6cd 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -74,7 +74,7 @@
 
 #define ohci_dbg_sw(ohci, next, size, format, arg...) \
 	do { \
-	if (next) { \
+	if (next != NULL) { \
 		unsigned s_len; \
 		s_len = scnprintf (*next, *size, format, ## arg ); \
 		*size -= s_len; *next += s_len; \
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index d60f198..40a1de4 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2208,8 +2208,6 @@
 clean_up:
 	if (reg)
 		iounmap(reg);
-	if (res)
-		release_mem_region(res->start, 1);
 
 	return ret;
 }
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 7f765ec..b88eb3c 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -1520,12 +1520,15 @@
                 }
         }
 }
+#ifdef CONFIG_PM
 
 static void port_power(struct u132 *u132, int pn, int is_on)
 {
         u132->port[pn].power = is_on;
 }
 
+#endif
+
 static void u132_power(struct u132 *u132, int is_on)
 {
         struct usb_hcd *hcd = u132_to_hcd(u132)
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index cff6fd1..77bb893 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -18,7 +18,6 @@
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
-	{ USB_DEVICE(0x413c, 0x8115) }, /* Dell Wireless HSDPA 5500 */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index e67ce25..86724e8 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -383,6 +383,10 @@
 	}
 
 	baud = tty_get_baud_rate(port->tty);
+	if (baud == 0) {
+		dbg("%s - tty_get_baud_rate says 0 baud", __FUNCTION__);
+		return;
+	}
 	urb_value = BELKIN_SA_BAUD(baud);
 	/* Clip to maximum speed */
 	if (urb_value == 0)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 7b1673a..1370c42 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -538,6 +538,8 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
 	{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
+	{ USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
+	{ USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index d9e4971..c70e1de 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -430,6 +430,9 @@
  */
 #define EVOLUTION_VID		0xDEEE	/* Vendor ID */
 #define EVOLUTION_ER1_PID	0x0300	/* ER1 Control Module */
+#define EVO_8U232AM_PID	0x02FF	/* Evolution robotics RCM2 (FT232AM)*/
+#define EVO_HYBRID_PID		0x0302	/* Evolution robotics RCM4 PID (FT232BM)*/
+#define EVO_RCM4_PID		0x0303	/* Evolution robotics RCM4 PID */
 
 /* Pyramid Computer GmbH */
 #define FTDI_PYRAMID_PID	0xE6C8	/* Pyramid Appliance Display */
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 04bd3b7..f1c90cf 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1,7 +1,7 @@
 /*
  * Garmin GPS driver
  *
- * Copyright (C) 2006 Hermann Kneissel herkne@users.sourceforge.net
+ * Copyright (C) 2006,2007 Hermann Kneissel herkne@users.sourceforge.net
  *
  * The latest version of the driver can be found at
  * http://sourceforge.net/projects/garmin-gps/
@@ -34,6 +34,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <asm/uaccess.h>
+#include <asm/atomic.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
@@ -52,7 +53,7 @@
  */
 
 #define VERSION_MAJOR	0
-#define VERSION_MINOR	28
+#define VERSION_MINOR	31
 
 #define _STR(s) #s
 #define _DRIVER_VERSION(a,b) "v" _STR(a) "." _STR(b)
@@ -141,6 +142,8 @@
 	__u8   inbuffer [GPS_IN_BUFSIZ];  /* tty -> usb */
 	__u8   outbuffer[GPS_OUT_BUFSIZ]; /* usb -> tty */
 	__u8   privpkt[4*6];
+	atomic_t req_count;
+	atomic_t resp_count;
 	spinlock_t lock;
 	struct list_head pktlist;
 };
@@ -171,8 +174,6 @@
 #define CLEAR_HALT_REQUIRED       0x0001
 
 #define FLAGS_QUEUING             0x0100
-#define FLAGS_APP_RESP_SEEN       0x0200
-#define FLAGS_APP_REQ_SEEN        0x0400
 #define FLAGS_DROP_DATA           0x0800
 
 #define FLAGS_GSP_SKIP            0x1000
@@ -186,7 +187,8 @@
 /* function prototypes */
 static void gsp_next_packet(struct garmin_data * garmin_data_p);
 static int  garmin_write_bulk(struct usb_serial_port *port,
-			     const unsigned char *buf, int count);
+			     const unsigned char *buf, int count,
+			     int dismiss_ack);
 
 /* some special packets to be send or received */
 static unsigned char const GARMIN_START_SESSION_REQ[]
@@ -233,9 +235,7 @@
 
 static inline int noResponseFromAppLayer(struct garmin_data * garmin_data_p)
 {
-	return ((garmin_data_p->flags
-				& (FLAGS_APP_REQ_SEEN|FLAGS_APP_RESP_SEEN))
-	        == FLAGS_APP_REQ_SEEN);
+	return atomic_read(&garmin_data_p->req_count) == atomic_read(&garmin_data_p->resp_count);
 }
 
 
@@ -463,7 +463,7 @@
 	usbdata[2] = __cpu_to_le32(size);
 
 	garmin_write_bulk (garmin_data_p->port, garmin_data_p->inbuffer,
-			   GARMIN_PKTHDR_LENGTH+size);
+			   GARMIN_PKTHDR_LENGTH+size, 0);
 
 	/* if this was an abort-transfer command, flush all
 	   queued data. */
@@ -818,7 +818,7 @@
 			if (garmin_data_p->insize >= len) {
 				garmin_write_bulk (garmin_data_p->port,
 				                   garmin_data_p->inbuffer,
-				                   len);
+				                   len, 0);
 				garmin_data_p->insize = 0;
 
 				/* if this was an abort-transfer command,
@@ -893,10 +893,11 @@
 
 	struct usb_serial_port *port = garmin_data_p->port;
 
-	if (port != NULL && garmin_data_p->flags & FLAGS_APP_RESP_SEEN) {
+	if (port != NULL && atomic_read(&garmin_data_p->resp_count)) {
 		/* send a terminate command */
 		status = garmin_write_bulk(port, GARMIN_STOP_TRANSFER_REQ,
-		                           sizeof(GARMIN_STOP_TRANSFER_REQ));
+		                           sizeof(GARMIN_STOP_TRANSFER_REQ),
+					   1);
 	}
 
 	/* flush all queued data */
@@ -939,7 +940,8 @@
 		dbg("%s - starting session ...", __FUNCTION__);
 		garmin_data_p->state = STATE_ACTIVE;
 		status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ,
-		                           sizeof(GARMIN_START_SESSION_REQ));
+		                           sizeof(GARMIN_START_SESSION_REQ),
+					   0);
 
 		if (status >= 0) {
 
@@ -950,7 +952,8 @@
 			/* not needed, but the win32 driver does it too ... */
 			status = garmin_write_bulk(port,
 						   GARMIN_START_SESSION_REQ2,
-			                           sizeof(GARMIN_START_SESSION_REQ2));
+			                           sizeof(GARMIN_START_SESSION_REQ2),
+						   0);
 			if (status >= 0) {
 				status = 0;
 				spin_lock_irqsave(&garmin_data_p->lock, flags);
@@ -987,6 +990,8 @@
 	garmin_data_p->mode  = initial_mode;
 	garmin_data_p->count = 0;
 	garmin_data_p->flags = 0;
+	atomic_set(&garmin_data_p->req_count, 0);
+	atomic_set(&garmin_data_p->resp_count, 0);
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
 	/* shutdown any bulk reads that might be going on */
@@ -1035,28 +1040,39 @@
 {
 	unsigned long flags;
 	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
-	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
 	int status = urb->status;
 
+	if (port) {
+		struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+
+		dbg("%s - port %d", __FUNCTION__, port->number);
+
+		if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)
+		    && (garmin_data_p->mode == MODE_GARMIN_SERIAL))  {
+			gsp_send_ack(garmin_data_p, ((__u8 *)urb->transfer_buffer)[4]);
+		}
+
+		if (status) {
+			dbg("%s - nonzero write bulk status received: %d",
+			    __FUNCTION__, urb->status);
+			spin_lock_irqsave(&garmin_data_p->lock, flags);
+			garmin_data_p->flags |= CLEAR_HALT_REQUIRED;
+			spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+		}
+
+		usb_serial_port_softint(port);
+	}
+
+	/* Ignore errors that resulted from garmin_write_bulk with dismiss_ack=1 */
+
 	/* free up the transfer buffer, as usb_free_urb() does not do this */
 	kfree (urb->transfer_buffer);
-
-	dbg("%s - port %d", __FUNCTION__, port->number);
-
-	if (status) {
-		dbg("%s - nonzero write bulk status received: %d",
-			__FUNCTION__, status);
-		spin_lock_irqsave(&garmin_data_p->lock, flags);
-		garmin_data_p->flags |= CLEAR_HALT_REQUIRED;
-		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
-	}
-
-	usb_serial_port_softint(port);
 }
 
 
 static int garmin_write_bulk (struct usb_serial_port *port,
-			      const unsigned char *buf, int count)
+			      const unsigned char *buf, int count,
+			      int dismiss_ack)
 {
 	unsigned long flags;
 	struct usb_serial *serial = port->serial;
@@ -1093,13 +1109,12 @@
 			 	usb_sndbulkpipe (serial->dev,
 				port->bulk_out_endpointAddress),
 				buffer, count,
-				garmin_write_bulk_callback, port);
+				garmin_write_bulk_callback,
+				dismiss_ack ? NULL : port);
 	urb->transfer_flags |= URB_ZERO_PACKET;
 
 	if (GARMIN_LAYERID_APPL == getLayerId(buffer)) {
-		spin_lock_irqsave(&garmin_data_p->lock, flags);
-		garmin_data_p->flags |= FLAGS_APP_REQ_SEEN;
-		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+		atomic_inc(&garmin_data_p->req_count);
 		if (garmin_data_p->mode == MODE_GARMIN_SERIAL)  {
 			pkt_clear(garmin_data_p);
 			garmin_data_p->state = STATE_GSP_WAIT_DATA;
@@ -1114,13 +1129,6 @@
 		        "failed with status = %d\n",
 				__FUNCTION__, status);
 		count = status;
-	} else {
-
-		if (GARMIN_LAYERID_APPL == getLayerId(buffer)
-		    && (garmin_data_p->mode == MODE_GARMIN_SERIAL))  {
-
-			gsp_send_ack(garmin_data_p, buffer[4]);
-		}
 	}
 
 	/* we are done with this urb, so let the host driver
@@ -1135,7 +1143,6 @@
 static int garmin_write (struct usb_serial_port *port,
 			 const unsigned char *buf, int count)
 {
-	unsigned long flags;
 	int pktid, pktsiz, len;
 	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
 	__le32 *privpkt = (__le32 *)garmin_data_p->privpkt;
@@ -1186,9 +1193,7 @@
 				break;
 
 			case PRIV_PKTID_RESET_REQ:
-				spin_lock_irqsave(&garmin_data_p->lock, flags);
-				garmin_data_p->flags |= FLAGS_APP_REQ_SEEN;
-				spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+				atomic_inc(&garmin_data_p->req_count);
 				break;
 
 			case PRIV_PKTID_SET_DEF_MODE:
@@ -1241,8 +1246,6 @@
 static void garmin_read_process(struct garmin_data * garmin_data_p,
 				 unsigned char *data, unsigned data_length)
 {
-	unsigned long flags;
-
 	if (garmin_data_p->flags & FLAGS_DROP_DATA) {
 		/* abort-transfer cmd is actice */
 		dbg("%s - pkt dropped", __FUNCTION__);
@@ -1254,9 +1257,7 @@
 		   the device */
 		if (0 == memcmp(data, GARMIN_APP_LAYER_REPLY,
 		                sizeof(GARMIN_APP_LAYER_REPLY))) {
-			spin_lock_irqsave(&garmin_data_p->lock, flags);
-			garmin_data_p->flags |= FLAGS_APP_RESP_SEEN;
-			spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+			atomic_inc(&garmin_data_p->resp_count);
 		}
 
 		/* if throttling is active or postprecessing is required
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 0455c15..6a3a704 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -545,6 +545,7 @@
 	{ USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */
 	{ USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */
 	{ USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */
+	{ USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC smartphone modems */
 	{ }                             /* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 84c12b5..4cb3c16 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -110,6 +110,7 @@
 #define HUAWEI_PRODUCT_E220			0x1003
 
 #define NOVATELWIRELESS_VENDOR_ID		0x1410
+#define DELL_VENDOR_ID				0x413C
 
 #define ANYDATA_VENDOR_ID			0x16d5
 #define ANYDATA_PRODUCT_ADU_E100A		0x6501
@@ -119,8 +120,6 @@
 #define BANDRICH_PRODUCT_C100_1			0x1002
 #define BANDRICH_PRODUCT_C100_2			0x1003
 
-#define DELL_VENDOR_ID				0x413C
-
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -171,11 +170,16 @@
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2110) }, /* Novatel Merlin ES620 / Merlin ES720 / Ovation U720 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */
+	{ USB_DEVICE(DELL_VENDOR_ID, 0x8114) },	/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
+	{ USB_DEVICE(DELL_VENDOR_ID, 0x8115) },	/* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
+	{ USB_DEVICE(DELL_VENDOR_ID, 0x8116) },	/* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
+	{ USB_DEVICE(DELL_VENDOR_ID, 0x8117) },	/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */
+	{ USB_DEVICE(DELL_VENDOR_ID, 0x8118) },	/* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */
+	{ USB_DEVICE(DELL_VENDOR_ID, 0x8128) },	/* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
-	{ USB_DEVICE(DELL_VENDOR_ID, 0x8118) },		/* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard */
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index d7db71e..833ada4 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -818,19 +818,17 @@
 
 	switch (cmd) {
 		case TCGETS:
-			if (copy_to_user(user_arg, port->tty->termios,
-						sizeof(struct ktermios))) {
+			if (kernel_termios_to_user_termios((struct ktermios __user *)arg,
+							   port->tty->termios))
 				return -EFAULT;
-			}
 			return 0;
 
 		case TCSETS:
 		case TCSETSW:	/* FIXME: this is not the same! */
 		case TCSETSF:	/* FIXME: this is not the same! */
-			if (copy_from_user(port->tty->termios, user_arg,
-						sizeof(struct ktermios))) {
+			if (user_termios_to_kernel_termios(port->tty->termios,
+						(struct ktermios __user *)arg))
 				return -EFAULT;
-			}
 			oti6858_set_termios(port, NULL);
 			return 0;
 
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 86899d5..51669b7 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -74,13 +74,13 @@
 #include <linux/usb/serial.h>
 
 
-#ifndef CONFIG_USB_SAFE_PADDED
-#define CONFIG_USB_SAFE_PADDED 0
+#ifndef CONFIG_USB_SERIAL_SAFE_PADDED
+#define CONFIG_USB_SERIAL_SAFE_PADDED 0
 #endif
 
 static int debug;
 static int safe = 1;
-static int padded = CONFIG_USB_SAFE_PADDED;
+static int padded = CONFIG_USB_SERIAL_SAFE_PADDED;
 
 #define DRIVER_VERSION "v0.0b"
 #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com"
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 7d84a76..30e08c0 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -104,6 +104,8 @@
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID),
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+	{ USB_DEVICE(ACER_VENDOR_ID, ACER_S10_ID),
+		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
 	{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID), 
 		.driver_info = (kernel_ulong_t)&palm_os_4_probe },
 	{ USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID), 
diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h
index 4ce6f62..57229cf 100644
--- a/drivers/usb/serial/visor.h
+++ b/drivers/usb/serial/visor.h
@@ -48,6 +48,9 @@
 #define SONY_CLIE_UX50_ID		0x0144
 #define SONY_CLIE_TJ25_ID		0x0169
 
+#define ACER_VENDOR_ID			0x0502
+#define ACER_S10_ID			0x0001
+
 #define SAMSUNG_VENDOR_ID		0x04E8
 #define SAMSUNG_SCH_I330_ID		0x8001
 #define SAMSUNG_SPH_I500_ID		0x6601
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index d8d008d..2d92ce3 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -342,7 +342,7 @@
 		US_FL_FIX_CAPACITY),
 
 /* Reported by Emil Larsson <emil@swip.net> */
-UNUSUAL_DEV(  0x04b0, 0x0411, 0x0100, 0x0100,
+UNUSUAL_DEV(  0x04b0, 0x0411, 0x0100, 0x0101,
 		"NIKON",
 		"NIKON DSC D80",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 28842d2..25e557d 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -112,13 +112,6 @@
 MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
 
 
-/* These are used to make sure the module doesn't unload before all the
- * threads have exited.
- */
-static atomic_t total_threads = ATOMIC_INIT(0);
-static DECLARE_COMPLETION(threads_gone);
-
-
 /*
  * The entries in this table correspond, line for line,
  * with the entries of us_unusual_dev_list[].
@@ -879,9 +872,6 @@
 	usb_stor_stop_transport(us);
 	wake_up(&us->delay_wait);
 
-	/* It doesn't matter if the SCSI-scanning thread is still running.
-	 * The thread will exit when it sees the DISCONNECTING flag. */
-
 	/* queuecommand won't accept any new commands and the control
 	 * thread won't execute a previously-queued command.  If there
 	 * is such a command pending, complete it with an error. */
@@ -891,12 +881,16 @@
 		scsi_lock(host);
 		us->srb->scsi_done(us->srb);
 		us->srb = NULL;
+		complete(&us->notify);		/* in case of an abort */
 		scsi_unlock(host);
 	}
 	mutex_unlock(&us->dev_mutex);
 
 	/* Now we own no commands so it's safe to remove the SCSI host */
 	scsi_remove_host(host);
+
+	/* Wait for the SCSI-scanning thread to stop */
+	wait_for_completion(&us->scanning_done);
 }
 
 /* Second stage of disconnect processing: deallocate all resources */
@@ -947,9 +941,8 @@
 		/* Should we unbind if no devices were detected? */
 	}
 
-	scsi_host_put(us_to_host(us));
 	usb_autopm_put_interface(us->pusb_intf);
-	complete_and_exit(&threads_gone, 0);
+	complete_and_exit(&us->scanning_done, 0);
 }
 
 
@@ -984,6 +977,7 @@
 	init_MUTEX_LOCKED(&(us->sema));
 	init_completion(&(us->notify));
 	init_waitqueue_head(&us->delay_wait);
+	init_completion(&us->scanning_done);
 
 	/* Associate the us_data structure with the USB device */
 	result = associate_dev(us, intf);
@@ -1033,11 +1027,6 @@
 		goto BadDevice;
 	}
 
-	/* Take a reference to the host for the scanning thread and
-	 * count it among all the threads we have launched.  Then
-	 * start it up. */
-	scsi_host_get(us_to_host(us));
-	atomic_inc(&total_threads);
 	usb_autopm_get_interface(intf); /* dropped in the scanning thread */
 	wake_up_process(th);
 
@@ -1104,16 +1093,6 @@
 	US_DEBUGP("-- calling usb_deregister()\n");
 	usb_deregister(&usb_storage_driver) ;
 
-	/* Don't return until all of our control and scanning threads
-	 * have exited.  Since each thread signals threads_gone as its
-	 * last act, we have to call wait_for_completion the right number
-	 * of times.
-	 */
-	while (atomic_read(&total_threads) > 0) {
-		wait_for_completion(&threads_gone);
-		atomic_dec(&total_threads);
-	}
-
 	usb_usual_clear_present(USB_US_TYPE_STOR);
 }
 
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 6445665..8d87503 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -150,6 +150,7 @@
 	struct semaphore	sema;		 /* to sleep thread on	    */
 	struct completion	notify;		 /* thread begin/end	    */
 	wait_queue_head_t	delay_wait;	 /* wait during scan, reset */
+	struct completion	scanning_done;	 /* wait for scan thread    */
 
 	/* subdriver information */
 	void			*extra;		 /* Any extra data          */
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 80a81ec..832e461 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -115,6 +115,52 @@
 module_param(nocursor, int, 0644);
 MODULE_PARM_DESC(nocursor, "cursor enable/disable");
 
+/* fb_blank
+ * Blank the screen. Depending on the mode, the screen will be
+ * activated with the backlight color, or desactivated
+ */
+static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
+{
+	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+
+	print_dbg("fb_blank %d %p", blank_mode, fbi);
+
+	switch (blank_mode) {
+
+	case VESA_NO_BLANKING:
+			/* Turn on panel */
+			fbdev->regs->lcd_control |= LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+			if (drv_info.panel_idx == 1) {
+				au_writew(au_readw(PB1100_G_CONTROL)
+					  | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+			PB1100_G_CONTROL);
+			}
+#endif
+		au_sync();
+		break;
+
+	case VESA_VSYNC_SUSPEND:
+	case VESA_HSYNC_SUSPEND:
+	case VESA_POWERDOWN:
+			/* Turn off panel */
+			fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
+#ifdef CONFIG_MIPS_PB1100
+			if (drv_info.panel_idx == 1) {
+				au_writew(au_readw(PB1100_G_CONTROL)
+				  	  & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
+			PB1100_G_CONTROL);
+			}
+#endif
+		au_sync();
+		break;
+	default:
+		break;
+
+	}
+	return 0;
+}
+
 /*
  * Set hardware with var settings. This will enable the controller with a specific
  * mode, normally validated with the fb_check_var method
@@ -272,52 +318,6 @@
 	return 0;
 }
 
-/* fb_blank
- * Blank the screen. Depending on the mode, the screen will be
- * activated with the backlight color, or desactivated
- */
-int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
-{
-	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
-
-	print_dbg("fb_blank %d %p", blank_mode, fbi);
-
-	switch (blank_mode) {
-
-	case VESA_NO_BLANKING:
-			/* Turn on panel */
-			fbdev->regs->lcd_control |= LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
-			if (drv_info.panel_idx == 1) {
-				au_writew(au_readw(PB1100_G_CONTROL)
-					  | (PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
-			PB1100_G_CONTROL);
-			}
-#endif
-		au_sync();
-		break;
-
-	case VESA_VSYNC_SUSPEND:
-	case VESA_HSYNC_SUSPEND:
-	case VESA_POWERDOWN:
-			/* Turn off panel */
-			fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
-#ifdef CONFIG_MIPS_PB1100
-			if (drv_info.panel_idx == 1) {
-				au_writew(au_readw(PB1100_G_CONTROL)
-				  	  & ~(PB1100_G_CONTROL_BL | PB1100_G_CONTROL_VDD),
-			PB1100_G_CONTROL);
-			}
-#endif
-		au_sync();
-		break;
-	default:
-		break;
-
-	}
-	return 0;
-}
-
 /* fb_pan_display
  * Pan display in x and/or y as specified
  */
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index 7fa1afe..dda0586 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -738,9 +738,8 @@
 #ifdef MODULE
 static int __init newport_console_init(void)
 {
-
 	if (!sgi_gfxaddr)
-		return NULL;
+		return 0;
 
 	if (!npregs)
 		npregs = (struct newport_regs *)/* ioremap cannot fail */
diff --git a/drivers/video/imsttfb.c b/drivers/video/imsttfb.c
index 5715b8a..94f4511 100644
--- a/drivers/video/imsttfb.c
+++ b/drivers/video/imsttfb.c
@@ -1391,7 +1391,7 @@
 		}
 	}
 
-#if USE_NV_MODES && defined(CONFIG_PPC)
+#if USE_NV_MODES && defined(CONFIG_PPC32)
 	{
 		int vmode = init_vmode, cmode = init_cmode;
 
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index 2fbd8dd..6840dfe 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -170,22 +170,24 @@
 
 void w1_remove_master_device(struct w1_bus_master *bm)
 {
-	struct w1_master *dev = NULL;
+	struct w1_master *dev, *found = NULL;
 
 	list_for_each_entry(dev, &w1_masters, w1_master_entry) {
 		if (!dev->initialized)
 			continue;
 
-		if (dev->bus_master->data == bm->data)
+		if (dev->bus_master->data == bm->data) {
+			found = dev;
 			break;
+		}
 	}
 
-	if (!dev) {
+	if (!found) {
 		printk(KERN_ERR "Device doesn't exist.\n");
 		return;
 	}
 
-	__w1_remove_master_device(dev);
+	__w1_remove_master_device(found);
 }
 
 EXPORT_SYMBOL(w1_add_master_device);
diff --git a/drivers/zorro/zorro-sysfs.c b/drivers/zorro/zorro-sysfs.c
index 9130f1c..808b4f8 100644
--- a/drivers/zorro/zorro-sysfs.c
+++ b/drivers/zorro/zorro-sysfs.c
@@ -78,7 +78,7 @@
 static struct bin_attribute zorro_config_attr = {
 	.attr =	{
 		.name = "config",
-		.mode = S_IRUGO | S_IWUSR,
+		.mode = S_IRUGO,
 	},
 	.size = sizeof(struct ConfigDev),
 	.read = zorro_read_config,
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 2d4c8a3..45ff3d6 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -587,19 +587,20 @@
 	unhashed = autofs4_lookup_unhashed(sbi, dentry->d_parent, &dentry->d_name);
 	if (!unhashed) {
 		/*
-		 * Mark the dentry incomplete, but add it. This is needed so
-		 * that the VFS layer knows about the dentry, and we can count
-		 * on catching any lookups through the revalidate.
-		 *
-		 * Let all the hard work be done by the revalidate function that
-		 * needs to be able to do this anyway..
-		 *
-		 * We need to do this before we release the directory semaphore.
+		 * Mark the dentry incomplete but don't hash it. We do this
+		 * to serialize our inode creation operations (symlink and
+		 * mkdir) which prevents deadlock during the callback to
+		 * the daemon. Subsequent user space lookups for the same
+		 * dentry are placed on the wait queue while the daemon
+		 * itself is allowed passage unresticted so the create
+		 * operation itself can then hash the dentry. Finally,
+		 * we check for the hashed dentry and return the newly
+		 * hashed dentry.
 		 */
 		dentry->d_op = &autofs4_root_dentry_operations;
 
 		dentry->d_fsdata = NULL;
-		d_add(dentry, NULL);
+		d_instantiate(dentry, NULL);
 	} else {
 		struct autofs_info *ino = autofs4_dentry_ino(unhashed);
 		DPRINTK("rehash %p with %p", dentry, unhashed);
@@ -607,15 +608,17 @@
 		 * If we are racing with expire the request might not
 		 * be quite complete but the directory has been removed
 		 * so it must have been successful, so just wait for it.
+		 * We need to ensure the AUTOFS_INF_EXPIRING flag is clear
+		 * before continuing as revalidate may fail when calling
+		 * try_to_fill_dentry (returning EAGAIN) if we don't.
 		 */
-		if (ino && (ino->flags & AUTOFS_INF_EXPIRING)) {
+		while (ino && (ino->flags & AUTOFS_INF_EXPIRING)) {
 			DPRINTK("wait for incomplete expire %p name=%.*s",
 				unhashed, unhashed->d_name.len,
 				unhashed->d_name.name);
 			autofs4_wait(sbi, unhashed, NFY_NONE);
 			DPRINTK("request completed");
 		}
-		d_rehash(unhashed);
 		dentry = unhashed;
 	}
 
@@ -658,7 +661,7 @@
 	 * for all system calls, but it should be OK for the operations
 	 * we permit from an autofs.
 	 */
-	if (dentry->d_inode && d_unhashed(dentry)) {
+	if (!oz_mode && d_unhashed(dentry)) {
 		/*
 		 * A user space application can (and has done in the past)
 		 * remove and re-create this directory during the callback.
@@ -716,7 +719,7 @@
 	strcpy(cp, symname);
 
 	inode = autofs4_get_inode(dir->i_sb, ino);
-	d_instantiate(dentry, inode);
+	d_add(dentry, inode);
 
 	if (dir == dir->i_sb->s_root->d_inode)
 		dentry->d_op = &autofs4_root_dentry_operations;
@@ -844,7 +847,7 @@
 		return -ENOSPC;
 
 	inode = autofs4_get_inode(dir->i_sb, ino);
-	d_instantiate(dentry, inode);
+	d_add(dentry, inode);
 
 	if (dir == dir->i_sb->s_root->d_inode)
 		dentry->d_op = &autofs4_root_dentry_operations;
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 131954b..5d40ad1 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -357,6 +357,10 @@
 		ecryptfs_printk(KERN_DEBUG, "Is a special file; returning\n");
 		goto out;
 	}
+	if (special_file(lower_inode->i_mode)) {
+		ecryptfs_printk(KERN_DEBUG, "Is a special file; returning\n");
+		goto out;
+	}
 	if (!nd) {
 		ecryptfs_printk(KERN_DEBUG, "We have a NULL nd, just leave"
 				"as we *think* we are about to unlink\n");
diff --git a/fs/exec.c b/fs/exec.c
index ce62f7b..c21a8cc 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -780,18 +780,11 @@
 	int count;
 
 	/*
-	 * Tell all the sighand listeners that this sighand has
-	 * been detached. The signalfd_detach() function grabs the
-	 * sighand lock, if signal listeners are present on the sighand.
-	 */
-	signalfd_detach(tsk);
-
-	/*
 	 * If we don't share sighandlers, then we aren't sharing anything
 	 * and we can just re-use it all.
 	 */
 	if (atomic_read(&oldsighand->count) <= 1) {
-		BUG_ON(atomic_read(&sig->count) != 1);
+		signalfd_detach(tsk);
 		exit_itimers(sig);
 		return 0;
 	}
@@ -930,12 +923,11 @@
 	sig->flags = 0;
 
 no_thread_group:
+	signalfd_detach(tsk);
 	exit_itimers(sig);
 	if (leader)
 		release_task(leader);
 
-	BUG_ON(atomic_read(&sig->count) != 1);
-
 	if (atomic_read(&oldsighand->count) == 1) {
 		/*
 		 * Now that we nuked the rest of the thread group,
diff --git a/fs/signalfd.c b/fs/signalfd.c
index 7b941ab..a8e293d 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -56,12 +56,18 @@
 		sighand = lock_task_sighand(lk->tsk, &lk->flags);
 	rcu_read_unlock();
 
-	if (sighand && !ctx->tsk) {
+	if (!sighand)
+		return 0;
+
+	if (!ctx->tsk) {
 		unlock_task_sighand(lk->tsk, &lk->flags);
-		sighand = NULL;
+		return 0;
 	}
 
-	return sighand != NULL;
+	if (lk->tsk->tgid == current->tgid)
+		lk->tsk = current;
+
+	return 1;
 }
 
 static void signalfd_unlock(struct signalfd_lockctx *lk)
@@ -331,7 +337,7 @@
 
 		init_waitqueue_head(&ctx->wqh);
 		ctx->sigmask = sigmask;
-		ctx->tsk = current;
+		ctx->tsk = current->group_leader;
 
 		sighand = current->sighand;
 		/*
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index 135353f..5afe2a2 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -248,12 +248,7 @@
 
 void sysfs_remove_bin_file(struct kobject * kobj, struct bin_attribute * attr)
 {
-	if (sysfs_hash_and_remove(kobj->sd, attr->attr.name) < 0) {
-		printk(KERN_ERR "%s: "
-			"bad dentry or inode or no such file: \"%s\"\n",
-			__FUNCTION__, attr->attr.name);
-		dump_stack();
-	}
+	sysfs_hash_and_remove(kobj->sd, attr->attr.name);
 }
 
 EXPORT_SYMBOL_GPL(sysfs_create_bin_file);
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 048e605..83e76b3 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -762,12 +762,15 @@
 static struct dentry * sysfs_lookup(struct inode *dir, struct dentry *dentry,
 				struct nameidata *nd)
 {
+	struct dentry *ret = NULL;
 	struct sysfs_dirent * parent_sd = dentry->d_parent->d_fsdata;
 	struct sysfs_dirent * sd;
 	struct bin_attribute *bin_attr;
 	struct inode *inode;
 	int found = 0;
 
+	mutex_lock(&sysfs_mutex);
+
 	for (sd = parent_sd->s_children; sd; sd = sd->s_sibling) {
 		if (sysfs_type(sd) &&
 		    !strcmp(sd->s_name, dentry->d_name.name)) {
@@ -778,14 +781,14 @@
 
 	/* no such entry */
 	if (!found)
-		return NULL;
+		goto out_unlock;
 
 	/* attach dentry and inode */
 	inode = sysfs_get_inode(sd);
-	if (!inode)
-		return ERR_PTR(-ENOMEM);
-
-	mutex_lock(&sysfs_mutex);
+	if (!inode) {
+		ret = ERR_PTR(-ENOMEM);
+		goto out_unlock;
+	}
 
 	if (inode->i_state & I_NEW) {
 		/* initialize inode according to type */
@@ -815,9 +818,9 @@
 	sysfs_instantiate(dentry, inode);
 	sysfs_attach_dentry(sd, dentry);
 
+ out_unlock:
 	mutex_unlock(&sysfs_mutex);
-
-	return NULL;
+	return ret;
 }
 
 const struct inode_operations sysfs_dir_inode_operations = {
@@ -942,6 +945,8 @@
 	if (error)
 		goto out_drop;
 
+	mutex_lock(&sysfs_mutex);
+
 	dup_name = sd->s_name;
 	sd->s_name = new_name;
 
@@ -949,8 +954,6 @@
 	d_add(new_dentry, NULL);
 	d_move(sd->s_dentry, new_dentry);
 
-	mutex_lock(&sysfs_mutex);
-
 	sysfs_unlink_sibling(sd);
 	sysfs_get(new_parent_sd);
 	sysfs_put(sd->s_parent);
diff --git a/include/asm-m68k/ioctls.h b/include/asm-m68k/ioctls.h
index 0c48929..b8d2f4b 100644
--- a/include/asm-m68k/ioctls.h
+++ b/include/asm-m68k/ioctls.h
@@ -46,6 +46,10 @@
 #define TIOCSBRK	0x5427  /* BSD compatibility */
 #define TIOCCBRK	0x5428  /* BSD compatibility */
 #define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T',0x2A, struct termios2)
+#define TCSETS2		_IOW('T',0x2B, struct termios2)
+#define TCSETSW2	_IOW('T',0x2C, struct termios2)
+#define TCSETSF2	_IOW('T',0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
 
diff --git a/include/asm-m68k/page.h b/include/asm-m68k/page.h
index 9e6d0d6..1431ea0 100644
--- a/include/asm-m68k/page.h
+++ b/include/asm-m68k/page.h
@@ -4,17 +4,15 @@
 
 #ifdef __KERNEL__
 
+#include <linux/const.h>
+
 /* PAGE_SHIFT determines the page size */
 #ifndef CONFIG_SUN3
 #define PAGE_SHIFT	(12)
 #else
 #define PAGE_SHIFT	(13)
 #endif
-#ifdef __ASSEMBLY__
-#define PAGE_SIZE	(1 << PAGE_SHIFT)
-#else
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
-#endif
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
 #include <asm/setup.h>
@@ -27,6 +25,8 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/compiler.h>
+
 #include <asm/module.h>
 
 #define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
diff --git a/include/asm-m68k/processor.h b/include/asm-m68k/processor.h
index 8455f77..4453ec3 100644
--- a/include/asm-m68k/processor.h
+++ b/include/asm-m68k/processor.h
@@ -38,12 +38,8 @@
 #ifndef CONFIG_SUN3
 #define TASK_SIZE	(0xF0000000UL)
 #else
-#ifdef __ASSEMBLY__
-#define TASK_SIZE	(0x0E000000)
-#else
 #define TASK_SIZE	(0x0E000000UL)
 #endif
-#endif
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
diff --git a/include/asm-m68k/termbits.h b/include/asm-m68k/termbits.h
index 0e520f3..8c14170 100644
--- a/include/asm-m68k/termbits.h
+++ b/include/asm-m68k/termbits.h
@@ -141,6 +141,7 @@
 #define HUPCL	0002000
 #define CLOCAL	0004000
 #define CBAUDEX 0010000
+#define    BOTHER 0010000
 #define    B57600 0010001
 #define   B115200 0010002
 #define   B230400 0010003
@@ -156,10 +157,12 @@
 #define  B3000000 0010015
 #define  B3500000 0010016
 #define  B4000000 0010017
-#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CIBAUD	  002003600000		/* input baud rate */
 #define CMSPAR	  010000000000		/* mark or space (stick) parity */
 #define CRTSCTS	  020000000000		/* flow control */
 
+#define IBSHIFT	16			/* Shift from CBAUD to CIBAUD */
+
 /* c_lflag bits */
 #define ISIG	0000001
 #define ICANON	0000002
diff --git a/include/asm-m68k/termios.h b/include/asm-m68k/termios.h
index 00edabd..0823032 100644
--- a/include/asm-m68k/termios.h
+++ b/include/asm-m68k/termios.h
@@ -82,8 +82,10 @@
 	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
 })
 
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
 
 #endif	/* __KERNEL__ */
 
diff --git a/include/asm-m68knommu/pgtable.h b/include/asm-m68knommu/pgtable.h
index e1e6a1d..4625101 100644
--- a/include/asm-m68knommu/pgtable.h
+++ b/include/asm-m68knommu/pgtable.h
@@ -65,4 +65,6 @@
 #define	VMALLOC_START	0
 #define	VMALLOC_END	0xffffffff
 
+#include <asm-generic/pgtable.h>
+
 #endif /* _M68KNOMMU_PGTABLE_H */
diff --git a/include/linux/kbd_kern.h b/include/linux/kbd_kern.h
index 506ad20..8bdb16b 100644
--- a/include/linux/kbd_kern.h
+++ b/include/linux/kbd_kern.h
@@ -161,4 +161,7 @@
 	schedule_delayed_work(&t->buf.work, 0);
 }
 
+/* mac_hid.c */
+extern int mac_hid_mouse_emulate_buttons(int, unsigned int, int);
+
 #endif
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index e147cf5..5bdd656 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -166,7 +166,7 @@
 
 static inline void check_highest_zone(enum zone_type k)
 {
-	if (k > policy_zone)
+	if (k > policy_zone && k != ZONE_MOVABLE)
 		policy_zone = k;
 }
 
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 655094d..1692dd6 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1042,7 +1042,7 @@
 }
 
 /* mmap.c */
-extern int __vm_enough_memory(long pages, int cap_sys_admin);
+extern int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin);
 extern void vma_adjust(struct vm_area_struct *vma, unsigned long start,
 	unsigned long end, pgoff_t pgoff, struct vm_area_struct *insert);
 extern struct vm_area_struct *vma_merge(struct mm_struct *,
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 3ea68cd..4e56273 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -410,6 +410,24 @@
 #endif
 };
 
+#ifdef CONFIG_NUMA
+/*
+ * Only custom zonelists like MPOL_BIND need to be filtered as part of
+ * policies. As described in the comment for struct zonelist_cache, these
+ * zonelists will not have a zlcache so zlcache_ptr will not be set. Use
+ * that to determine if the zonelists needs to be filtered or not.
+ */
+static inline int alloc_should_filter_zonelist(struct zonelist *zonelist)
+{
+	return !zonelist->zlcache_ptr;
+}
+#else
+static inline int alloc_should_filter_zonelist(struct zonelist *zonelist)
+{
+	return 0;
+}
+#endif /* CONFIG_NUMA */
+
 #ifdef CONFIG_ARCH_POPULATES_NODE_MAP
 struct node_active_region {
 	unsigned long start_pfn;
diff --git a/include/linux/security.h b/include/linux/security.h
index c11dc8a..1a15526 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -54,7 +54,7 @@
 extern int cap_task_post_setuid (uid_t old_ruid, uid_t old_euid, uid_t old_suid, int flags);
 extern void cap_task_reparent_to_init (struct task_struct *p);
 extern int cap_syslog (int type);
-extern int cap_vm_enough_memory (long pages);
+extern int cap_vm_enough_memory (struct mm_struct *mm, long pages);
 
 struct msghdr;
 struct sk_buff;
@@ -1125,6 +1125,7 @@
  *	Return 0 if permission is granted.
  * @vm_enough_memory:
  *	Check permissions for allocating a new virtual mapping.
+ *	@mm contains the mm struct it is being added to.
  *      @pages contains the number of pages.
  *	Return 0 if permission is granted.
  *
@@ -1169,7 +1170,7 @@
 	int (*quota_on) (struct dentry * dentry);
 	int (*syslog) (int type);
 	int (*settime) (struct timespec *ts, struct timezone *tz);
-	int (*vm_enough_memory) (long pages);
+	int (*vm_enough_memory) (struct mm_struct *mm, long pages);
 
 	int (*bprm_alloc_security) (struct linux_binprm * bprm);
 	void (*bprm_free_security) (struct linux_binprm * bprm);
@@ -1469,10 +1470,14 @@
 	return security_ops->settime(ts, tz);
 }
 
-
 static inline int security_vm_enough_memory(long pages)
 {
-	return security_ops->vm_enough_memory(pages);
+	return security_ops->vm_enough_memory(current->mm, pages);
+}
+
+static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages)
+{
+	return security_ops->vm_enough_memory(mm, pages);
 }
 
 static inline int security_bprm_alloc (struct linux_binprm *bprm)
@@ -2219,7 +2224,12 @@
 
 static inline int security_vm_enough_memory(long pages)
 {
-	return cap_vm_enough_memory(pages);
+	return cap_vm_enough_memory(current->mm, pages);
+}
+
+static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages)
+{
+	return cap_vm_enough_memory(mm, pages);
 }
 
 static inline int security_bprm_alloc (struct linux_binprm *bprm)
diff --git a/include/linux/selection.h b/include/linux/selection.h
index ed3408b..f945786 100644
--- a/include/linux/selection.h
+++ b/include/linux/selection.h
@@ -10,6 +10,8 @@
 #include <linux/tiocl.h>
 #include <linux/vt_buffer.h>
 
+struct tty_struct;
+
 extern struct vc_data *sel_cons;
 
 extern void clear_selection(void);
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 1c5ed7d..96c0d93 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -118,6 +118,7 @@
 #define UART_LSR_PE		0x04 /* Parity error indicator */
 #define UART_LSR_OE		0x02 /* Overrun error indicator */
 #define UART_LSR_DR		0x01 /* Receiver data ready */
+#define UART_LSR_BRK_ERROR_BITS	0x1E /* BI, FE, PE, OE bits */
 
 #define UART_MSR	6	/* In:  Modem Status Register */
 #define UART_MSR_DCD		0x80 /* Data Carrier Detect */
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 3401293..04f3ffb 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -2023,7 +2023,7 @@
 		axp->d.next = ctx->aux_pids;
 		ctx->aux_pids = (void *)axp;
 	}
-	BUG_ON(axp->pid_count > AUDIT_AUX_PIDS);
+	BUG_ON(axp->pid_count >= AUDIT_AUX_PIDS);
 
 	axp->target_pid[axp->pid_count] = t->tgid;
 	selinux_get_task_sid(t, &axp->target_sid[axp->pid_count]);
diff --git a/kernel/futex.c b/kernel/futex.c
index 3415e9a..e8935b1 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1670,6 +1670,7 @@
 					 attempt);
 		if (ret)
 			goto out;
+		uval = 0;
 		goto retry_unlocked;
 	}
 
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 203a518..853aefb 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -462,7 +462,9 @@
 		 * We do this after actually deregistering it, to make sure that
 		 * a 'real' IRQ doesn't run in parallel with our fake
 		 */
+		local_irq_save(flags);
 		handler(irq, dev_id);
+		local_irq_restore(flags);
 	}
 #endif
 }
diff --git a/kernel/module.c b/kernel/module.c
index 33c04ad..db0ead0 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -784,8 +784,7 @@
 static ssize_t show_refcnt(struct module_attribute *mattr,
 			   struct module *mod, char *buffer)
 {
-	/* sysfs holds a reference */
-	return sprintf(buffer, "%u\n", module_refcount(mod)-1);
+	return sprintf(buffer, "%u\n", module_refcount(mod));
 }
 
 static struct module_attribute refcnt = {
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 55b3761..7a15afb 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -547,9 +547,9 @@
 				new_timer->it_process = process;
 				list_add(&new_timer->list,
 					 &process->signal->posix_timers);
-				spin_unlock_irqrestore(&process->sighand->siglock, flags);
 				if (new_timer->it_sigev_notify == (SIGEV_SIGNAL|SIGEV_THREAD_ID))
 					get_task_struct(process);
+				spin_unlock_irqrestore(&process->sighand->siglock, flags);
 			} else {
 				spin_unlock_irqrestore(&process->sighand->siglock, flags);
 				process = NULL;
@@ -605,13 +605,14 @@
 	timr = (struct k_itimer *) idr_find(&posix_timers_id, (int) timer_id);
 	if (timr) {
 		spin_lock(&timr->it_lock);
-		spin_unlock(&idr_lock);
 
 		if ((timr->it_id != timer_id) || !(timr->it_process) ||
 				timr->it_process->tgid != current->tgid) {
-			unlock_timer(timr, *flags);
+			spin_unlock(&timr->it_lock);
+			spin_unlock_irqrestore(&idr_lock, *flags);
 			timr = NULL;
-		}
+		} else
+			spin_unlock(&idr_lock);
 	} else
 		spin_unlock_irqrestore(&idr_lock, *flags);
 
diff --git a/kernel/signal.c b/kernel/signal.c
index b27c01a..ad63109 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -378,7 +378,7 @@
 	/* We only dequeue private signals from ourselves, we don't let
 	 * signalfd steal them
 	 */
-	if (tsk == current)
+	if (likely(tsk == current))
 		signr = __dequeue_signal(&tsk->pending, mask, info);
 	if (!signr) {
 		signr = __dequeue_signal(&tsk->signal->shared_pending,
@@ -425,7 +425,7 @@
 		if (!(tsk->signal->flags & SIGNAL_GROUP_EXIT))
 			tsk->signal->flags |= SIGNAL_STOP_DEQUEUED;
 	}
-	if ( signr &&
+	if (signr && likely(tsk == current) &&
 	     ((info->si_code & __SI_MASK) == __SI_TIMER) &&
 	     info->si_sys_private){
 		/*
diff --git a/lib/Kconfig b/lib/Kconfig
index e5c2c51..ba3d104 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -138,4 +138,7 @@
 	depends on !NO_DMA
 	default y
 
+config CHECK_SIGNATURE
+	bool
+
 endmenu
diff --git a/lib/Makefile b/lib/Makefile
index d9e5f1c..6b0ba8c 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -21,7 +21,8 @@
 endif
 
 obj-$(CONFIG_GENERIC_IOMAP) += iomap.o
-obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o check_signature.o
+obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o
+obj-$(CONFIG_CHECK_SIGNATURE) += check_signature.o
 obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o
 obj-$(CONFIG_DEBUG_SPINLOCK) += spinlock_debug.o
 lib-$(CONFIG_RWSEM_GENERIC_SPINLOCK) += rwsem-spinlock.o
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index d7ca59d..de4cf45 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -643,7 +643,7 @@
 			spin_unlock(&mm->page_table_lock);
 			ret = hugetlb_fault(mm, vma, vaddr, 0);
 			spin_lock(&mm->page_table_lock);
-			if (!(ret & VM_FAULT_MAJOR))
+			if (!(ret & VM_FAULT_ERROR))
 				continue;
 
 			remainder = 0;
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 71b84b4..172abff 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -149,7 +149,7 @@
 	   lower zones etc. Avoid empty zones because the memory allocator
 	   doesn't like them. If you implement node hot removal you
 	   have to fix that. */
-	k = policy_zone;
+	k = MAX_NR_ZONES - 1;
 	while (1) {
 		for_each_node_mask(nd, *nodes) { 
 			struct zone *z = &NODE_DATA(nd)->node_zones[k];
diff --git a/mm/mmap.c b/mm/mmap.c
index b653721..0d40e66c 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -93,7 +93,7 @@
  * Note this is a helper function intended to be used by LSMs which
  * wish to use this logic.
  */
-int __vm_enough_memory(long pages, int cap_sys_admin)
+int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)
 {
 	unsigned long free, allowed;
 
@@ -166,7 +166,7 @@
 
 	/* Don't let a single process grow too big:
 	   leave 3% of the size of this process for other processes */
-	allowed -= current->mm->total_vm / 32;
+	allowed -= mm->total_vm / 32;
 
 	/*
 	 * cast `allowed' as a signed long because vm_committed_space
@@ -2077,7 +2077,7 @@
 	if (__vma && __vma->vm_start < vma->vm_end)
 		return -ENOMEM;
 	if ((vma->vm_flags & VM_ACCOUNT) &&
-	     security_vm_enough_memory(vma_pages(vma)))
+	     security_vm_enough_memory_mm(mm, vma_pages(vma)))
 		return -ENOMEM;
 	vma_link(mm, vma, prev, rb_link, rb_parent);
 	return 0;
diff --git a/mm/nommu.c b/mm/nommu.c
index 9eef6a39..8ed0cb4 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1270,7 +1270,7 @@
  * Note this is a helper function intended to be used by LSMs which
  * wish to use this logic.
  */
-int __vm_enough_memory(long pages, int cap_sys_admin)
+int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)
 {
 	unsigned long free, allowed;
 
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 3da85b8..6427653 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1157,6 +1157,7 @@
 	nodemask_t *allowednodes = NULL;/* zonelist_cache approximation */
 	int zlc_active = 0;		/* set if using zonelist_cache */
 	int did_zlc_setup = 0;		/* just call zlc_setup() one time */
+	enum zone_type highest_zoneidx = -1; /* Gets set for policy zonelists */
 
 zonelist_scan:
 	/*
@@ -1166,6 +1167,18 @@
 	z = zonelist->zones;
 
 	do {
+		/*
+		 * In NUMA, this could be a policy zonelist which contains
+		 * zones that may not be allowed by the current gfp_mask.
+		 * Check the zone is allowed by the current flags
+		 */
+		if (unlikely(alloc_should_filter_zonelist(zonelist))) {
+			if (highest_zoneidx == -1)
+				highest_zoneidx = gfp_zone(gfp_mask);
+			if (zone_idx(*z) > highest_zoneidx)
+				continue;
+		}
+
 		if (NUMA_BUILD && zlc_active &&
 			!zlc_zone_worth_trying(zonelist, z, allowednodes))
 				continue;
diff --git a/mm/slab.c b/mm/slab.c
index a684778..6f6abef 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -883,6 +883,7 @@
   */
 
 static int use_alien_caches __read_mostly = 1;
+static int numa_platform __read_mostly = 1;
 static int __init noaliencache_setup(char *s)
 {
 	use_alien_caches = 0;
@@ -1399,8 +1400,10 @@
 	int order;
 	int node;
 
-	if (num_possible_nodes() == 1)
+	if (num_possible_nodes() == 1) {
 		use_alien_caches = 0;
+		numa_platform = 0;
+	}
 
 	for (i = 0; i < NUM_INIT_LISTS; i++) {
 		kmem_list3_init(&initkmem_list3[i]);
@@ -3558,7 +3561,14 @@
 	check_irq_off();
 	objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
 
-	if (cache_free_alien(cachep, objp))
+	/*
+	 * Skip calling cache_free_alien() when the platform is not numa.
+	 * This will avoid cache misses that happen while accessing slabp (which
+	 * is per page memory  reference) to get nodeid. Instead use a global
+	 * variable to skip the call, which is mostly likely to be present in
+	 * the cache.
+	 */
+	if (numa_platform && cache_free_alien(cachep, objp))
 		return;
 
 	if (likely(ac->avail < ac->limit)) {
diff --git a/mm/slub.c b/mm/slub.c
index 69d02e3..04151da 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1877,9 +1877,16 @@
 
 	BUG_ON(kmalloc_caches->size < sizeof(struct kmem_cache_node));
 
-	page = new_slab(kmalloc_caches, gfpflags | GFP_THISNODE, node);
+	page = new_slab(kmalloc_caches, gfpflags, node);
 
 	BUG_ON(!page);
+	if (page_to_nid(page) != node) {
+		printk(KERN_ERR "SLUB: Unable to allocate memory from "
+				"node %d\n", node);
+		printk(KERN_ERR "SLUB: Allocating a useless per node structure "
+				"in order to be able to continue\n");
+	}
+
 	n = page->freelist;
 	BUG_ON(!n);
 	page->freelist = get_freepointer(kmalloc_caches, n);
@@ -3112,7 +3119,7 @@
 		unsigned long flags;
 		struct page *page;
 
-		if (!atomic_read(&n->nr_slabs))
+		if (!atomic_long_read(&n->nr_slabs))
 			continue;
 
 		spin_lock_irqsave(&n->list_lock, flags);
@@ -3247,7 +3254,7 @@
 		}
 
 		if (flags & SO_FULL) {
-			int full_slabs = atomic_read(&n->nr_slabs)
+			int full_slabs = atomic_long_read(&n->nr_slabs)
 					- per_cpu[node]
 					- n->nr_partial;
 
@@ -3283,7 +3290,7 @@
 	for_each_node(node) {
 		struct kmem_cache_node *n = get_node(s, node);
 
-		if (n->nr_partial || atomic_read(&n->nr_slabs))
+		if (n->nr_partial || atomic_long_read(&n->nr_slabs))
 			return 1;
 	}
 	return 0;
diff --git a/mm/sparse.c b/mm/sparse.c
index 3047bf0..239f5a7 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -41,6 +41,15 @@
 	return section_to_node_table[page_to_section(page)];
 }
 EXPORT_SYMBOL(page_to_nid);
+
+static void set_section_nid(unsigned long section_nr, int nid)
+{
+	section_to_node_table[section_nr] = nid;
+}
+#else /* !NODE_NOT_IN_PAGE_FLAGS */
+static inline void set_section_nid(unsigned long section_nr, int nid)
+{
+}
 #endif
 
 #ifdef CONFIG_SPARSEMEM_EXTREME
@@ -68,10 +77,6 @@
 	struct mem_section *section;
 	int ret = 0;
 
-#ifdef NODE_NOT_IN_PAGE_FLAGS
-	section_to_node_table[section_nr] = nid;
-#endif
-
 	if (mem_section[root])
 		return -EEXIST;
 
@@ -148,6 +153,7 @@
 		struct mem_section *ms;
 
 		sparse_index_init(section, nid);
+		set_section_nid(section, nid);
 
 		ms = __nr_to_section(section);
 		if (!ms->section_mem_map)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index d419e10..a6e65d0 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -271,6 +271,12 @@
 	unlock_page(page);
 }
 
+/* Request for sync pageout. */
+enum pageout_io {
+	PAGEOUT_IO_ASYNC,
+	PAGEOUT_IO_SYNC,
+};
+
 /* possible outcome of pageout() */
 typedef enum {
 	/* failed to write page out, page is locked */
@@ -287,7 +293,8 @@
  * pageout is called by shrink_page_list() for each dirty page.
  * Calls ->writepage().
  */
-static pageout_t pageout(struct page *page, struct address_space *mapping)
+static pageout_t pageout(struct page *page, struct address_space *mapping,
+						enum pageout_io sync_writeback)
 {
 	/*
 	 * If the page is dirty, only perform writeback if that write
@@ -346,6 +353,15 @@
 			ClearPageReclaim(page);
 			return PAGE_ACTIVATE;
 		}
+
+		/*
+		 * Wait on writeback if requested to. This happens when
+		 * direct reclaiming a large contiguous area and the
+		 * first attempt to free a range of pages fails.
+		 */
+		if (PageWriteback(page) && sync_writeback == PAGEOUT_IO_SYNC)
+			wait_on_page_writeback(page);
+
 		if (!PageWriteback(page)) {
 			/* synchronous write or broken a_ops? */
 			ClearPageReclaim(page);
@@ -423,7 +439,8 @@
  * shrink_page_list() returns the number of reclaimed pages
  */
 static unsigned long shrink_page_list(struct list_head *page_list,
-					struct scan_control *sc)
+					struct scan_control *sc,
+					enum pageout_io sync_writeback)
 {
 	LIST_HEAD(ret_pages);
 	struct pagevec freed_pvec;
@@ -458,8 +475,23 @@
 		if (page_mapped(page) || PageSwapCache(page))
 			sc->nr_scanned++;
 
-		if (PageWriteback(page))
-			goto keep_locked;
+		may_enter_fs = (sc->gfp_mask & __GFP_FS) ||
+			(PageSwapCache(page) && (sc->gfp_mask & __GFP_IO));
+
+		if (PageWriteback(page)) {
+			/*
+			 * Synchronous reclaim is performed in two passes,
+			 * first an asynchronous pass over the list to
+			 * start parallel writeback, and a second synchronous
+			 * pass to wait for the IO to complete.  Wait here
+			 * for any page for which writeback has already
+			 * started.
+			 */
+			if (sync_writeback == PAGEOUT_IO_SYNC && may_enter_fs)
+				wait_on_page_writeback(page);
+			else
+				goto keep_locked;
+		}
 
 		referenced = page_referenced(page, 1);
 		/* In active use or really unfreeable?  Activate it. */
@@ -478,8 +510,6 @@
 #endif /* CONFIG_SWAP */
 
 		mapping = page_mapping(page);
-		may_enter_fs = (sc->gfp_mask & __GFP_FS) ||
-			(PageSwapCache(page) && (sc->gfp_mask & __GFP_IO));
 
 		/*
 		 * The page is mapped into the page tables of one or more
@@ -505,7 +535,7 @@
 				goto keep_locked;
 
 			/* Page is dirty, try to write it out here */
-			switch(pageout(page, mapping)) {
+			switch (pageout(page, mapping, sync_writeback)) {
 			case PAGE_KEEP:
 				goto keep_locked;
 			case PAGE_ACTIVATE:
@@ -777,6 +807,7 @@
 			     (sc->order > PAGE_ALLOC_COSTLY_ORDER)?
 					     ISOLATE_BOTH : ISOLATE_INACTIVE);
 		nr_active = clear_active_flags(&page_list);
+		__count_vm_events(PGDEACTIVATE, nr_active);
 
 		__mod_zone_page_state(zone, NR_ACTIVE, -nr_active);
 		__mod_zone_page_state(zone, NR_INACTIVE,
@@ -785,7 +816,29 @@
 		spin_unlock_irq(&zone->lru_lock);
 
 		nr_scanned += nr_scan;
-		nr_freed = shrink_page_list(&page_list, sc);
+		nr_freed = shrink_page_list(&page_list, sc, PAGEOUT_IO_ASYNC);
+
+		/*
+		 * If we are direct reclaiming for contiguous pages and we do
+		 * not reclaim everything in the list, try again and wait
+		 * for IO to complete. This will stall high-order allocations
+		 * but that should be acceptable to the caller
+		 */
+		if (nr_freed < nr_taken && !current_is_kswapd() &&
+					sc->order > PAGE_ALLOC_COSTLY_ORDER) {
+			congestion_wait(WRITE, HZ/10);
+
+			/*
+			 * The attempt at page out may have made some
+			 * of the pages active, mark them inactive again.
+			 */
+			nr_active = clear_active_flags(&page_list);
+			count_vm_events(PGDEACTIVATE, nr_active);
+
+			nr_freed += shrink_page_list(&page_list, sc,
+							PAGEOUT_IO_SYNC);
+		}
+
 		nr_reclaimed += nr_freed;
 		local_irq_disable();
 		if (current_is_kswapd()) {
diff --git a/security/commoncap.c b/security/commoncap.c
index 338606e..7520361 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -315,13 +315,13 @@
 	return 0;
 }
 
-int cap_vm_enough_memory(long pages)
+int cap_vm_enough_memory(struct mm_struct *mm, long pages)
 {
 	int cap_sys_admin = 0;
 
 	if (cap_capable(current, CAP_SYS_ADMIN) == 0)
 		cap_sys_admin = 1;
-	return __vm_enough_memory(pages, cap_sys_admin);
+	return __vm_enough_memory(mm, pages, cap_sys_admin);
 }
 
 EXPORT_SYMBOL(cap_capable);
diff --git a/security/dummy.c b/security/dummy.c
index 19d813d..853ec22 100644
--- a/security/dummy.c
+++ b/security/dummy.c
@@ -108,13 +108,13 @@
 	return 0;
 }
 
-static int dummy_vm_enough_memory(long pages)
+static int dummy_vm_enough_memory(struct mm_struct *mm, long pages)
 {
 	int cap_sys_admin = 0;
 
 	if (dummy_capable(current, CAP_SYS_ADMIN) == 0)
 		cap_sys_admin = 1;
-	return __vm_enough_memory(pages, cap_sys_admin);
+	return __vm_enough_memory(mm, pages, cap_sys_admin);
 }
 
 static int dummy_bprm_alloc_security (struct linux_binprm *bprm)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 6237933..d8bc417 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1584,7 +1584,7 @@
  * Do not audit the selinux permission check, as this is applied to all
  * processes that allocate mappings.
  */
-static int selinux_vm_enough_memory(long pages)
+static int selinux_vm_enough_memory(struct mm_struct *mm, long pages)
 {
 	int rc, cap_sys_admin = 0;
 	struct task_security_struct *tsec = current->security;
@@ -1600,7 +1600,7 @@
 	if (rc == 0)
 		cap_sys_admin = 1;
 
-	return __vm_enough_memory(pages, cap_sys_admin);
+	return __vm_enough_memory(mm, pages, cap_sys_admin);
 }
 
 /* binprm security operations */