| /* | 
 |  *  linux/kernel/time/tick-sched.c | 
 |  * | 
 |  *  Copyright(C) 2005-2006, Thomas Gleixner <tglx@linutronix.de> | 
 |  *  Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar | 
 |  *  Copyright(C) 2006-2007  Timesys Corp., Thomas Gleixner | 
 |  * | 
 |  *  No idle tick implementation for low and high resolution timers | 
 |  * | 
 |  *  Started by: Thomas Gleixner and Ingo Molnar | 
 |  * | 
 |  *  Distribute under GPLv2. | 
 |  */ | 
 | #include <linux/cpu.h> | 
 | #include <linux/err.h> | 
 | #include <linux/hrtimer.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/kernel_stat.h> | 
 | #include <linux/percpu.h> | 
 | #include <linux/profile.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/module.h> | 
 |  | 
 | #include <asm/irq_regs.h> | 
 |  | 
 | #include "tick-internal.h" | 
 |  | 
 | /* | 
 |  * Per cpu nohz control structure | 
 |  */ | 
 | static DEFINE_PER_CPU(struct tick_sched, tick_cpu_sched); | 
 |  | 
 | /* | 
 |  * The time, when the last jiffy update happened. Protected by xtime_lock. | 
 |  */ | 
 | static ktime_t last_jiffies_update; | 
 |  | 
 | struct tick_sched *tick_get_tick_sched(int cpu) | 
 | { | 
 | 	return &per_cpu(tick_cpu_sched, cpu); | 
 | } | 
 |  | 
 | /* | 
 |  * Must be called with interrupts disabled ! | 
 |  */ | 
 | static void tick_do_update_jiffies64(ktime_t now) | 
 | { | 
 | 	unsigned long ticks = 0; | 
 | 	ktime_t delta; | 
 |  | 
 | 	/* | 
 | 	 * Do a quick check without holding xtime_lock: | 
 | 	 */ | 
 | 	delta = ktime_sub(now, last_jiffies_update); | 
 | 	if (delta.tv64 < tick_period.tv64) | 
 | 		return; | 
 |  | 
 | 	/* Reevalute with xtime_lock held */ | 
 | 	write_seqlock(&xtime_lock); | 
 |  | 
 | 	delta = ktime_sub(now, last_jiffies_update); | 
 | 	if (delta.tv64 >= tick_period.tv64) { | 
 |  | 
 | 		delta = ktime_sub(delta, tick_period); | 
 | 		last_jiffies_update = ktime_add(last_jiffies_update, | 
 | 						tick_period); | 
 |  | 
 | 		/* Slow path for long timeouts */ | 
 | 		if (unlikely(delta.tv64 >= tick_period.tv64)) { | 
 | 			s64 incr = ktime_to_ns(tick_period); | 
 |  | 
 | 			ticks = ktime_divns(delta, incr); | 
 |  | 
 | 			last_jiffies_update = ktime_add_ns(last_jiffies_update, | 
 | 							   incr * ticks); | 
 | 		} | 
 | 		do_timer(++ticks); | 
 |  | 
 | 		/* Keep the tick_next_period variable up to date */ | 
 | 		tick_next_period = ktime_add(last_jiffies_update, tick_period); | 
 | 	} | 
 | 	write_sequnlock(&xtime_lock); | 
 | } | 
 |  | 
 | /* | 
 |  * Initialize and return retrieve the jiffies update. | 
 |  */ | 
 | static ktime_t tick_init_jiffy_update(void) | 
 | { | 
 | 	ktime_t period; | 
 |  | 
 | 	write_seqlock(&xtime_lock); | 
 | 	/* Did we start the jiffies update yet ? */ | 
 | 	if (last_jiffies_update.tv64 == 0) | 
 | 		last_jiffies_update = tick_next_period; | 
 | 	period = last_jiffies_update; | 
 | 	write_sequnlock(&xtime_lock); | 
 | 	return period; | 
 | } | 
 |  | 
 | /* | 
 |  * NOHZ - aka dynamic tick functionality | 
 |  */ | 
 | #ifdef CONFIG_NO_HZ | 
 | /* | 
 |  * NO HZ enabled ? | 
 |  */ | 
 | static int tick_nohz_enabled __read_mostly  = 1; | 
 |  | 
 | /* | 
 |  * Enable / Disable tickless mode | 
 |  */ | 
 | static int __init setup_tick_nohz(char *str) | 
 | { | 
 | 	if (!strcmp(str, "off")) | 
 | 		tick_nohz_enabled = 0; | 
 | 	else if (!strcmp(str, "on")) | 
 | 		tick_nohz_enabled = 1; | 
 | 	else | 
 | 		return 0; | 
 | 	return 1; | 
 | } | 
 |  | 
 | __setup("nohz=", setup_tick_nohz); | 
 |  | 
 | /** | 
 |  * tick_nohz_update_jiffies - update jiffies when idle was interrupted | 
 |  * | 
 |  * Called from interrupt entry when the CPU was idle | 
 |  * | 
 |  * In case the sched_tick was stopped on this CPU, we have to check if jiffies | 
 |  * must be updated. Otherwise an interrupt handler could use a stale jiffy | 
 |  * value. We do this unconditionally on any cpu, as we don't know whether the | 
 |  * cpu, which has the update task assigned is in a long sleep. | 
 |  */ | 
 | static void tick_nohz_update_jiffies(ktime_t now) | 
 | { | 
 | 	int cpu = smp_processor_id(); | 
 | 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); | 
 | 	unsigned long flags; | 
 |  | 
 | 	ts->idle_waketime = now; | 
 |  | 
 | 	local_irq_save(flags); | 
 | 	tick_do_update_jiffies64(now); | 
 | 	local_irq_restore(flags); | 
 |  | 
 | 	touch_softlockup_watchdog(); | 
 | } | 
 |  | 
 | /* | 
 |  * Updates the per cpu time idle statistics counters | 
 |  */ | 
 | static void | 
 | update_ts_time_stats(int cpu, struct tick_sched *ts, ktime_t now, u64 *last_update_time) | 
 | { | 
 | 	ktime_t delta; | 
 |  | 
 | 	if (ts->idle_active) { | 
 | 		delta = ktime_sub(now, ts->idle_entrytime); | 
 | 		if (nr_iowait_cpu(cpu) > 0) | 
 | 			ts->iowait_sleeptime = ktime_add(ts->iowait_sleeptime, delta); | 
 | 		else | 
 | 			ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta); | 
 | 		ts->idle_entrytime = now; | 
 | 	} | 
 |  | 
 | 	if (last_update_time) | 
 | 		*last_update_time = ktime_to_us(now); | 
 |  | 
 | } | 
 |  | 
 | static void tick_nohz_stop_idle(int cpu, ktime_t now) | 
 | { | 
 | 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); | 
 |  | 
 | 	update_ts_time_stats(cpu, ts, now, NULL); | 
 | 	ts->idle_active = 0; | 
 |  | 
 | 	sched_clock_idle_wakeup_event(0); | 
 | } | 
 |  | 
 | static ktime_t tick_nohz_start_idle(int cpu, struct tick_sched *ts) | 
 | { | 
 | 	ktime_t now = ktime_get(); | 
 |  | 
 | 	ts->idle_entrytime = now; | 
 | 	ts->idle_active = 1; | 
 | 	sched_clock_idle_sleep_event(); | 
 | 	return now; | 
 | } | 
 |  | 
 | /** | 
 |  * get_cpu_idle_time_us - get the total idle time of a cpu | 
 |  * @cpu: CPU number to query | 
 |  * @last_update_time: variable to store update time in. Do not update | 
 |  * counters if NULL. | 
 |  * | 
 |  * Return the cummulative idle time (since boot) for a given | 
 |  * CPU, in microseconds. | 
 |  * | 
 |  * This time is measured via accounting rather than sampling, | 
 |  * and is as accurate as ktime_get() is. | 
 |  * | 
 |  * This function returns -1 if NOHZ is not enabled. | 
 |  */ | 
 | u64 get_cpu_idle_time_us(int cpu, u64 *last_update_time) | 
 | { | 
 | 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); | 
 | 	ktime_t now, idle; | 
 |  | 
 | 	if (!tick_nohz_enabled) | 
 | 		return -1; | 
 |  | 
 | 	now = ktime_get(); | 
 | 	if (last_update_time) { | 
 | 		update_ts_time_stats(cpu, ts, now, last_update_time); | 
 | 		idle = ts->idle_sleeptime; | 
 | 	} else { | 
 | 		if (ts->idle_active && !nr_iowait_cpu(cpu)) { | 
 | 			ktime_t delta = ktime_sub(now, ts->idle_entrytime); | 
 |  | 
 | 			idle = ktime_add(ts->idle_sleeptime, delta); | 
 | 		} else { | 
 | 			idle = ts->idle_sleeptime; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return ktime_to_us(idle); | 
 |  | 
 | } | 
 | EXPORT_SYMBOL_GPL(get_cpu_idle_time_us); | 
 |  | 
 | /** | 
 |  * get_cpu_iowait_time_us - get the total iowait time of a cpu | 
 |  * @cpu: CPU number to query | 
 |  * @last_update_time: variable to store update time in. Do not update | 
 |  * counters if NULL. | 
 |  * | 
 |  * Return the cummulative iowait time (since boot) for a given | 
 |  * CPU, in microseconds. | 
 |  * | 
 |  * This time is measured via accounting rather than sampling, | 
 |  * and is as accurate as ktime_get() is. | 
 |  * | 
 |  * This function returns -1 if NOHZ is not enabled. | 
 |  */ | 
 | u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time) | 
 | { | 
 | 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); | 
 | 	ktime_t now, iowait; | 
 |  | 
 | 	if (!tick_nohz_enabled) | 
 | 		return -1; | 
 |  | 
 | 	now = ktime_get(); | 
 | 	if (last_update_time) { | 
 | 		update_ts_time_stats(cpu, ts, now, last_update_time); | 
 | 		iowait = ts->iowait_sleeptime; | 
 | 	} else { | 
 | 		if (ts->idle_active && nr_iowait_cpu(cpu) > 0) { | 
 | 			ktime_t delta = ktime_sub(now, ts->idle_entrytime); | 
 |  | 
 | 			iowait = ktime_add(ts->iowait_sleeptime, delta); | 
 | 		} else { | 
 | 			iowait = ts->iowait_sleeptime; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return ktime_to_us(iowait); | 
 | } | 
 | EXPORT_SYMBOL_GPL(get_cpu_iowait_time_us); | 
 |  | 
 | static void tick_nohz_stop_sched_tick(struct tick_sched *ts) | 
 | { | 
 | 	unsigned long seq, last_jiffies, next_jiffies, delta_jiffies; | 
 | 	ktime_t last_update, expires, now; | 
 | 	struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev; | 
 | 	u64 time_delta; | 
 | 	int cpu; | 
 |  | 
 | 	cpu = smp_processor_id(); | 
 | 	ts = &per_cpu(tick_cpu_sched, cpu); | 
 |  | 
 | 	now = tick_nohz_start_idle(cpu, ts); | 
 |  | 
 | 	/* | 
 | 	 * If this cpu is offline and it is the one which updates | 
 | 	 * jiffies, then give up the assignment and let it be taken by | 
 | 	 * the cpu which runs the tick timer next. If we don't drop | 
 | 	 * this here the jiffies might be stale and do_timer() never | 
 | 	 * invoked. | 
 | 	 */ | 
 | 	if (unlikely(!cpu_online(cpu))) { | 
 | 		if (cpu == tick_do_timer_cpu) | 
 | 			tick_do_timer_cpu = TICK_DO_TIMER_NONE; | 
 | 	} | 
 |  | 
 | 	if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE)) | 
 | 		return; | 
 |  | 
 | 	if (need_resched()) | 
 | 		return; | 
 |  | 
 | 	if (unlikely(local_softirq_pending() && cpu_online(cpu))) { | 
 | 		static int ratelimit; | 
 |  | 
 | 		if (ratelimit < 10) { | 
 | 			printk(KERN_ERR "NOHZ: local_softirq_pending %02x\n", | 
 | 			       (unsigned int) local_softirq_pending()); | 
 | 			ratelimit++; | 
 | 		} | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ts->idle_calls++; | 
 | 	/* Read jiffies and the time when jiffies were updated last */ | 
 | 	do { | 
 | 		seq = read_seqbegin(&xtime_lock); | 
 | 		last_update = last_jiffies_update; | 
 | 		last_jiffies = jiffies; | 
 | 		time_delta = timekeeping_max_deferment(); | 
 | 	} while (read_seqretry(&xtime_lock, seq)); | 
 |  | 
 | 	if (rcu_needs_cpu(cpu) || printk_needs_cpu(cpu) || | 
 | 	    arch_needs_cpu(cpu)) { | 
 | 		next_jiffies = last_jiffies + 1; | 
 | 		delta_jiffies = 1; | 
 | 	} else { | 
 | 		/* Get the next timer wheel timer */ | 
 | 		next_jiffies = get_next_timer_interrupt(last_jiffies); | 
 | 		delta_jiffies = next_jiffies - last_jiffies; | 
 | 	} | 
 | 	/* | 
 | 	 * Do not stop the tick, if we are only one off | 
 | 	 * or if the cpu is required for rcu | 
 | 	 */ | 
 | 	if (!ts->tick_stopped && delta_jiffies == 1) | 
 | 		goto out; | 
 |  | 
 | 	/* Schedule the tick, if we are at least one jiffie off */ | 
 | 	if ((long)delta_jiffies >= 1) { | 
 |  | 
 | 		/* | 
 | 		 * If this cpu is the one which updates jiffies, then | 
 | 		 * give up the assignment and let it be taken by the | 
 | 		 * cpu which runs the tick timer next, which might be | 
 | 		 * this cpu as well. If we don't drop this here the | 
 | 		 * jiffies might be stale and do_timer() never | 
 | 		 * invoked. Keep track of the fact that it was the one | 
 | 		 * which had the do_timer() duty last. If this cpu is | 
 | 		 * the one which had the do_timer() duty last, we | 
 | 		 * limit the sleep time to the timekeeping | 
 | 		 * max_deferement value which we retrieved | 
 | 		 * above. Otherwise we can sleep as long as we want. | 
 | 		 */ | 
 | 		if (cpu == tick_do_timer_cpu) { | 
 | 			tick_do_timer_cpu = TICK_DO_TIMER_NONE; | 
 | 			ts->do_timer_last = 1; | 
 | 		} else if (tick_do_timer_cpu != TICK_DO_TIMER_NONE) { | 
 | 			time_delta = KTIME_MAX; | 
 | 			ts->do_timer_last = 0; | 
 | 		} else if (!ts->do_timer_last) { | 
 | 			time_delta = KTIME_MAX; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * calculate the expiry time for the next timer wheel | 
 | 		 * timer. delta_jiffies >= NEXT_TIMER_MAX_DELTA signals | 
 | 		 * that there is no timer pending or at least extremely | 
 | 		 * far into the future (12 days for HZ=1000). In this | 
 | 		 * case we set the expiry to the end of time. | 
 | 		 */ | 
 | 		if (likely(delta_jiffies < NEXT_TIMER_MAX_DELTA)) { | 
 | 			/* | 
 | 			 * Calculate the time delta for the next timer event. | 
 | 			 * If the time delta exceeds the maximum time delta | 
 | 			 * permitted by the current clocksource then adjust | 
 | 			 * the time delta accordingly to ensure the | 
 | 			 * clocksource does not wrap. | 
 | 			 */ | 
 | 			time_delta = min_t(u64, time_delta, | 
 | 					   tick_period.tv64 * delta_jiffies); | 
 | 		} | 
 |  | 
 | 		if (time_delta < KTIME_MAX) | 
 | 			expires = ktime_add_ns(last_update, time_delta); | 
 | 		else | 
 | 			expires.tv64 = KTIME_MAX; | 
 |  | 
 | 		/* Skip reprogram of event if its not changed */ | 
 | 		if (ts->tick_stopped && ktime_equal(expires, dev->next_event)) | 
 | 			goto out; | 
 |  | 
 | 		/* | 
 | 		 * nohz_stop_sched_tick can be called several times before | 
 | 		 * the nohz_restart_sched_tick is called. This happens when | 
 | 		 * interrupts arrive which do not cause a reschedule. In the | 
 | 		 * first call we save the current tick time, so we can restart | 
 | 		 * the scheduler tick in nohz_restart_sched_tick. | 
 | 		 */ | 
 | 		if (!ts->tick_stopped) { | 
 | 			select_nohz_load_balancer(1); | 
 |  | 
 | 			ts->idle_tick = hrtimer_get_expires(&ts->sched_timer); | 
 | 			ts->tick_stopped = 1; | 
 | 			ts->idle_jiffies = last_jiffies; | 
 | 		} | 
 |  | 
 | 		ts->idle_sleeps++; | 
 |  | 
 | 		/* Mark expires */ | 
 | 		ts->idle_expires = expires; | 
 |  | 
 | 		/* | 
 | 		 * If the expiration time == KTIME_MAX, then | 
 | 		 * in this case we simply stop the tick timer. | 
 | 		 */ | 
 | 		 if (unlikely(expires.tv64 == KTIME_MAX)) { | 
 | 			if (ts->nohz_mode == NOHZ_MODE_HIGHRES) | 
 | 				hrtimer_cancel(&ts->sched_timer); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		if (ts->nohz_mode == NOHZ_MODE_HIGHRES) { | 
 | 			hrtimer_start(&ts->sched_timer, expires, | 
 | 				      HRTIMER_MODE_ABS_PINNED); | 
 | 			/* Check, if the timer was already in the past */ | 
 | 			if (hrtimer_active(&ts->sched_timer)) | 
 | 				goto out; | 
 | 		} else if (!tick_program_event(expires, 0)) | 
 | 				goto out; | 
 | 		/* | 
 | 		 * We are past the event already. So we crossed a | 
 | 		 * jiffie boundary. Update jiffies and raise the | 
 | 		 * softirq. | 
 | 		 */ | 
 | 		tick_do_update_jiffies64(ktime_get()); | 
 | 	} | 
 | 	raise_softirq_irqoff(TIMER_SOFTIRQ); | 
 | out: | 
 | 	ts->next_jiffies = next_jiffies; | 
 | 	ts->last_jiffies = last_jiffies; | 
 | 	ts->sleep_length = ktime_sub(dev->next_event, now); | 
 | } | 
 |  | 
 | /** | 
 |  * tick_nohz_idle_enter - stop the idle tick from the idle task | 
 |  * | 
 |  * When the next event is more than a tick into the future, stop the idle tick | 
 |  * Called when we start the idle loop. | 
 |  * | 
 |  * The arch is responsible of calling: | 
 |  * | 
 |  * - rcu_idle_enter() after its last use of RCU before the CPU is put | 
 |  *  to sleep. | 
 |  * - rcu_idle_exit() before the first use of RCU after the CPU is woken up. | 
 |  */ | 
 | void tick_nohz_idle_enter(void) | 
 | { | 
 | 	struct tick_sched *ts; | 
 |  | 
 | 	WARN_ON_ONCE(irqs_disabled()); | 
 |  | 
 | 	/* | 
 |  	 * Update the idle state in the scheduler domain hierarchy | 
 |  	 * when tick_nohz_stop_sched_tick() is called from the idle loop. | 
 |  	 * State will be updated to busy during the first busy tick after | 
 |  	 * exiting idle. | 
 |  	 */ | 
 | 	set_cpu_sd_state_idle(); | 
 |  | 
 | 	local_irq_disable(); | 
 |  | 
 | 	ts = &__get_cpu_var(tick_cpu_sched); | 
 | 	/* | 
 | 	 * set ts->inidle unconditionally. even if the system did not | 
 | 	 * switch to nohz mode the cpu frequency governers rely on the | 
 | 	 * update of the idle time accounting in tick_nohz_start_idle(). | 
 | 	 */ | 
 | 	ts->inidle = 1; | 
 | 	tick_nohz_stop_sched_tick(ts); | 
 |  | 
 | 	local_irq_enable(); | 
 | } | 
 |  | 
 | /** | 
 |  * tick_nohz_irq_exit - update next tick event from interrupt exit | 
 |  * | 
 |  * When an interrupt fires while we are idle and it doesn't cause | 
 |  * a reschedule, it may still add, modify or delete a timer, enqueue | 
 |  * an RCU callback, etc... | 
 |  * So we need to re-calculate and reprogram the next tick event. | 
 |  */ | 
 | void tick_nohz_irq_exit(void) | 
 | { | 
 | 	struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched); | 
 |  | 
 | 	if (!ts->inidle) | 
 | 		return; | 
 |  | 
 | 	tick_nohz_stop_sched_tick(ts); | 
 | } | 
 |  | 
 | /** | 
 |  * tick_nohz_get_sleep_length - return the length of the current sleep | 
 |  * | 
 |  * Called from power state control code with interrupts disabled | 
 |  */ | 
 | ktime_t tick_nohz_get_sleep_length(void) | 
 | { | 
 | 	struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched); | 
 |  | 
 | 	return ts->sleep_length; | 
 | } | 
 |  | 
 | static void tick_nohz_restart(struct tick_sched *ts, ktime_t now) | 
 | { | 
 | 	hrtimer_cancel(&ts->sched_timer); | 
 | 	hrtimer_set_expires(&ts->sched_timer, ts->idle_tick); | 
 |  | 
 | 	while (1) { | 
 | 		/* Forward the time to expire in the future */ | 
 | 		hrtimer_forward(&ts->sched_timer, now, tick_period); | 
 |  | 
 | 		if (ts->nohz_mode == NOHZ_MODE_HIGHRES) { | 
 | 			hrtimer_start_expires(&ts->sched_timer, | 
 | 					      HRTIMER_MODE_ABS_PINNED); | 
 | 			/* Check, if the timer was already in the past */ | 
 | 			if (hrtimer_active(&ts->sched_timer)) | 
 | 				break; | 
 | 		} else { | 
 | 			if (!tick_program_event( | 
 | 				hrtimer_get_expires(&ts->sched_timer), 0)) | 
 | 				break; | 
 | 		} | 
 | 		/* Reread time and update jiffies */ | 
 | 		now = ktime_get(); | 
 | 		tick_do_update_jiffies64(now); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * tick_nohz_idle_exit - restart the idle tick from the idle task | 
 |  * | 
 |  * Restart the idle tick when the CPU is woken up from idle | 
 |  * This also exit the RCU extended quiescent state. The CPU | 
 |  * can use RCU again after this function is called. | 
 |  */ | 
 | void tick_nohz_idle_exit(void) | 
 | { | 
 | 	int cpu = smp_processor_id(); | 
 | 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); | 
 | #ifndef CONFIG_VIRT_CPU_ACCOUNTING | 
 | 	unsigned long ticks; | 
 | #endif | 
 | 	ktime_t now; | 
 |  | 
 | 	local_irq_disable(); | 
 |  | 
 | 	WARN_ON_ONCE(!ts->inidle); | 
 |  | 
 | 	ts->inidle = 0; | 
 |  | 
 | 	if (ts->idle_active || ts->tick_stopped) | 
 | 		now = ktime_get(); | 
 |  | 
 | 	if (ts->idle_active) | 
 | 		tick_nohz_stop_idle(cpu, now); | 
 |  | 
 | 	if (!ts->tick_stopped) { | 
 | 		local_irq_enable(); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* Update jiffies first */ | 
 | 	select_nohz_load_balancer(0); | 
 | 	tick_do_update_jiffies64(now); | 
 |  | 
 | #ifndef CONFIG_VIRT_CPU_ACCOUNTING | 
 | 	/* | 
 | 	 * We stopped the tick in idle. Update process times would miss the | 
 | 	 * time we slept as update_process_times does only a 1 tick | 
 | 	 * accounting. Enforce that this is accounted to idle ! | 
 | 	 */ | 
 | 	ticks = jiffies - ts->idle_jiffies; | 
 | 	/* | 
 | 	 * We might be one off. Do not randomly account a huge number of ticks! | 
 | 	 */ | 
 | 	if (ticks && ticks < LONG_MAX) | 
 | 		account_idle_ticks(ticks); | 
 | #endif | 
 |  | 
 | 	touch_softlockup_watchdog(); | 
 | 	/* | 
 | 	 * Cancel the scheduled timer and restore the tick | 
 | 	 */ | 
 | 	ts->tick_stopped  = 0; | 
 | 	ts->idle_exittime = now; | 
 |  | 
 | 	tick_nohz_restart(ts, now); | 
 |  | 
 | 	local_irq_enable(); | 
 | } | 
 |  | 
 | static int tick_nohz_reprogram(struct tick_sched *ts, ktime_t now) | 
 | { | 
 | 	hrtimer_forward(&ts->sched_timer, now, tick_period); | 
 | 	return tick_program_event(hrtimer_get_expires(&ts->sched_timer), 0); | 
 | } | 
 |  | 
 | /* | 
 |  * The nohz low res interrupt handler | 
 |  */ | 
 | static void tick_nohz_handler(struct clock_event_device *dev) | 
 | { | 
 | 	struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched); | 
 | 	struct pt_regs *regs = get_irq_regs(); | 
 | 	int cpu = smp_processor_id(); | 
 | 	ktime_t now = ktime_get(); | 
 |  | 
 | 	dev->next_event.tv64 = KTIME_MAX; | 
 |  | 
 | 	/* | 
 | 	 * Check if the do_timer duty was dropped. We don't care about | 
 | 	 * concurrency: This happens only when the cpu in charge went | 
 | 	 * into a long sleep. If two cpus happen to assign themself to | 
 | 	 * this duty, then the jiffies update is still serialized by | 
 | 	 * xtime_lock. | 
 | 	 */ | 
 | 	if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE)) | 
 | 		tick_do_timer_cpu = cpu; | 
 |  | 
 | 	/* Check, if the jiffies need an update */ | 
 | 	if (tick_do_timer_cpu == cpu) | 
 | 		tick_do_update_jiffies64(now); | 
 |  | 
 | 	/* | 
 | 	 * When we are idle and the tick is stopped, we have to touch | 
 | 	 * the watchdog as we might not schedule for a really long | 
 | 	 * time. This happens on complete idle SMP systems while | 
 | 	 * waiting on the login prompt. We also increment the "start | 
 | 	 * of idle" jiffy stamp so the idle accounting adjustment we | 
 | 	 * do when we go busy again does not account too much ticks. | 
 | 	 */ | 
 | 	if (ts->tick_stopped) { | 
 | 		touch_softlockup_watchdog(); | 
 | 		ts->idle_jiffies++; | 
 | 	} | 
 |  | 
 | 	update_process_times(user_mode(regs)); | 
 | 	profile_tick(CPU_PROFILING); | 
 |  | 
 | 	while (tick_nohz_reprogram(ts, now)) { | 
 | 		now = ktime_get(); | 
 | 		tick_do_update_jiffies64(now); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * tick_nohz_switch_to_nohz - switch to nohz mode | 
 |  */ | 
 | static void tick_nohz_switch_to_nohz(void) | 
 | { | 
 | 	struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched); | 
 | 	ktime_t next; | 
 |  | 
 | 	if (!tick_nohz_enabled) | 
 | 		return; | 
 |  | 
 | 	local_irq_disable(); | 
 | 	if (tick_switch_to_oneshot(tick_nohz_handler)) { | 
 | 		local_irq_enable(); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ts->nohz_mode = NOHZ_MODE_LOWRES; | 
 |  | 
 | 	/* | 
 | 	 * Recycle the hrtimer in ts, so we can share the | 
 | 	 * hrtimer_forward with the highres code. | 
 | 	 */ | 
 | 	hrtimer_init(&ts->sched_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); | 
 | 	/* Get the next period */ | 
 | 	next = tick_init_jiffy_update(); | 
 |  | 
 | 	for (;;) { | 
 | 		hrtimer_set_expires(&ts->sched_timer, next); | 
 | 		if (!tick_program_event(next, 0)) | 
 | 			break; | 
 | 		next = ktime_add(next, tick_period); | 
 | 	} | 
 | 	local_irq_enable(); | 
 | } | 
 |  | 
 | /* | 
 |  * When NOHZ is enabled and the tick is stopped, we need to kick the | 
 |  * tick timer from irq_enter() so that the jiffies update is kept | 
 |  * alive during long running softirqs. That's ugly as hell, but | 
 |  * correctness is key even if we need to fix the offending softirq in | 
 |  * the first place. | 
 |  * | 
 |  * Note, this is different to tick_nohz_restart. We just kick the | 
 |  * timer and do not touch the other magic bits which need to be done | 
 |  * when idle is left. | 
 |  */ | 
 | static void tick_nohz_kick_tick(int cpu, ktime_t now) | 
 | { | 
 | #if 0 | 
 | 	/* Switch back to 2.6.27 behaviour */ | 
 |  | 
 | 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); | 
 | 	ktime_t delta; | 
 |  | 
 | 	/* | 
 | 	 * Do not touch the tick device, when the next expiry is either | 
 | 	 * already reached or less/equal than the tick period. | 
 | 	 */ | 
 | 	delta =	ktime_sub(hrtimer_get_expires(&ts->sched_timer), now); | 
 | 	if (delta.tv64 <= tick_period.tv64) | 
 | 		return; | 
 |  | 
 | 	tick_nohz_restart(ts, now); | 
 | #endif | 
 | } | 
 |  | 
 | static inline void tick_check_nohz(int cpu) | 
 | { | 
 | 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); | 
 | 	ktime_t now; | 
 |  | 
 | 	if (!ts->idle_active && !ts->tick_stopped) | 
 | 		return; | 
 | 	now = ktime_get(); | 
 | 	if (ts->idle_active) | 
 | 		tick_nohz_stop_idle(cpu, now); | 
 | 	if (ts->tick_stopped) { | 
 | 		tick_nohz_update_jiffies(now); | 
 | 		tick_nohz_kick_tick(cpu, now); | 
 | 	} | 
 | } | 
 |  | 
 | #else | 
 |  | 
 | static inline void tick_nohz_switch_to_nohz(void) { } | 
 | static inline void tick_check_nohz(int cpu) { } | 
 |  | 
 | #endif /* NO_HZ */ | 
 |  | 
 | /* | 
 |  * Called from irq_enter to notify about the possible interruption of idle() | 
 |  */ | 
 | void tick_check_idle(int cpu) | 
 | { | 
 | 	tick_check_oneshot_broadcast(cpu); | 
 | 	tick_check_nohz(cpu); | 
 | } | 
 |  | 
 | /* | 
 |  * High resolution timer specific code | 
 |  */ | 
 | #ifdef CONFIG_HIGH_RES_TIMERS | 
 | /* | 
 |  * We rearm the timer until we get disabled by the idle code. | 
 |  * Called with interrupts disabled and timer->base->cpu_base->lock held. | 
 |  */ | 
 | static enum hrtimer_restart tick_sched_timer(struct hrtimer *timer) | 
 | { | 
 | 	struct tick_sched *ts = | 
 | 		container_of(timer, struct tick_sched, sched_timer); | 
 | 	struct pt_regs *regs = get_irq_regs(); | 
 | 	ktime_t now = ktime_get(); | 
 | 	int cpu = smp_processor_id(); | 
 |  | 
 | #ifdef CONFIG_NO_HZ | 
 | 	/* | 
 | 	 * Check if the do_timer duty was dropped. We don't care about | 
 | 	 * concurrency: This happens only when the cpu in charge went | 
 | 	 * into a long sleep. If two cpus happen to assign themself to | 
 | 	 * this duty, then the jiffies update is still serialized by | 
 | 	 * xtime_lock. | 
 | 	 */ | 
 | 	if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE)) | 
 | 		tick_do_timer_cpu = cpu; | 
 | #endif | 
 |  | 
 | 	/* Check, if the jiffies need an update */ | 
 | 	if (tick_do_timer_cpu == cpu) | 
 | 		tick_do_update_jiffies64(now); | 
 |  | 
 | 	/* | 
 | 	 * Do not call, when we are not in irq context and have | 
 | 	 * no valid regs pointer | 
 | 	 */ | 
 | 	if (regs) { | 
 | 		/* | 
 | 		 * When we are idle and the tick is stopped, we have to touch | 
 | 		 * the watchdog as we might not schedule for a really long | 
 | 		 * time. This happens on complete idle SMP systems while | 
 | 		 * waiting on the login prompt. We also increment the "start of | 
 | 		 * idle" jiffy stamp so the idle accounting adjustment we do | 
 | 		 * when we go busy again does not account too much ticks. | 
 | 		 */ | 
 | 		if (ts->tick_stopped) { | 
 | 			touch_softlockup_watchdog(); | 
 | 			ts->idle_jiffies++; | 
 | 		} | 
 | 		update_process_times(user_mode(regs)); | 
 | 		profile_tick(CPU_PROFILING); | 
 | 	} | 
 |  | 
 | 	hrtimer_forward(timer, now, tick_period); | 
 |  | 
 | 	return HRTIMER_RESTART; | 
 | } | 
 |  | 
 | /** | 
 |  * tick_setup_sched_timer - setup the tick emulation timer | 
 |  */ | 
 | void tick_setup_sched_timer(void) | 
 | { | 
 | 	struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched); | 
 | 	ktime_t now = ktime_get(); | 
 |  | 
 | 	/* | 
 | 	 * Emulate tick processing via per-CPU hrtimers: | 
 | 	 */ | 
 | 	hrtimer_init(&ts->sched_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); | 
 | 	ts->sched_timer.function = tick_sched_timer; | 
 |  | 
 | 	/* Get the next period (per cpu) */ | 
 | 	hrtimer_set_expires(&ts->sched_timer, tick_init_jiffy_update()); | 
 |  | 
 | 	for (;;) { | 
 | 		hrtimer_forward(&ts->sched_timer, now, tick_period); | 
 | 		hrtimer_start_expires(&ts->sched_timer, | 
 | 				      HRTIMER_MODE_ABS_PINNED); | 
 | 		/* Check, if the timer was already in the past */ | 
 | 		if (hrtimer_active(&ts->sched_timer)) | 
 | 			break; | 
 | 		now = ktime_get(); | 
 | 	} | 
 |  | 
 | #ifdef CONFIG_NO_HZ | 
 | 	if (tick_nohz_enabled) | 
 | 		ts->nohz_mode = NOHZ_MODE_HIGHRES; | 
 | #endif | 
 | } | 
 | #endif /* HIGH_RES_TIMERS */ | 
 |  | 
 | #if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS | 
 | void tick_cancel_sched_timer(int cpu) | 
 | { | 
 | 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); | 
 |  | 
 | # ifdef CONFIG_HIGH_RES_TIMERS | 
 | 	if (ts->sched_timer.base) | 
 | 		hrtimer_cancel(&ts->sched_timer); | 
 | # endif | 
 |  | 
 | 	ts->nohz_mode = NOHZ_MODE_INACTIVE; | 
 | } | 
 | #endif | 
 |  | 
 | /** | 
 |  * Async notification about clocksource changes | 
 |  */ | 
 | void tick_clock_notify(void) | 
 | { | 
 | 	int cpu; | 
 |  | 
 | 	for_each_possible_cpu(cpu) | 
 | 		set_bit(0, &per_cpu(tick_cpu_sched, cpu).check_clocks); | 
 | } | 
 |  | 
 | /* | 
 |  * Async notification about clock event changes | 
 |  */ | 
 | void tick_oneshot_notify(void) | 
 | { | 
 | 	struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched); | 
 |  | 
 | 	set_bit(0, &ts->check_clocks); | 
 | } | 
 |  | 
 | /** | 
 |  * Check, if a change happened, which makes oneshot possible. | 
 |  * | 
 |  * Called cyclic from the hrtimer softirq (driven by the timer | 
 |  * softirq) allow_nohz signals, that we can switch into low-res nohz | 
 |  * mode, because high resolution timers are disabled (either compile | 
 |  * or runtime). | 
 |  */ | 
 | int tick_check_oneshot_change(int allow_nohz) | 
 | { | 
 | 	struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched); | 
 |  | 
 | 	if (!test_and_clear_bit(0, &ts->check_clocks)) | 
 | 		return 0; | 
 |  | 
 | 	if (ts->nohz_mode != NOHZ_MODE_INACTIVE) | 
 | 		return 0; | 
 |  | 
 | 	if (!timekeeping_valid_for_hres() || !tick_is_oneshot_available()) | 
 | 		return 0; | 
 |  | 
 | 	if (!allow_nohz) | 
 | 		return 1; | 
 |  | 
 | 	tick_nohz_switch_to_nohz(); | 
 | 	return 0; | 
 | } |