Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 into HEAD
There are some more conflicts than detected by git, namely support for
the newly added cpuimx machines needed to be converted to dynamic device
registration.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Conflicts:
arch/arm/mach-imx/Makefile
arch/arm/mach-imx/devices.c
arch/arm/mach-imx/devices.h
arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
arch/arm/mach-mx2/Kconfig
arch/arm/mach-mx25/Makefile
arch/arm/mach-mx25/devices.c
arch/arm/plat-mxc/include/mach/mx25.h
arch/arm/plat-mxc/include/mach/mxc_nand.h
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 64ba313..ad81ece 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -145,8 +145,8 @@
machine-$(CONFIG_ARCH_MMP) := mmp
machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
-machine-$(CONFIG_ARCH_MX1) := mx1
-machine-$(CONFIG_ARCH_MX2) := mx2
+machine-$(CONFIG_ARCH_MX1) := imx
+machine-$(CONFIG_ARCH_MX2) := imx
machine-$(CONFIG_ARCH_MX25) := mx25
machine-$(CONFIG_ARCH_MX3) := mx3
machine-$(CONFIG_ARCH_MX5) := mx5
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 9236475..44cea2d 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,12 +1,14 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34
-# Sat May 22 03:17:31 2010
+# Fri May 28 19:15:48 2010
#
CONFIG_ARM=y
CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
@@ -35,6 +37,7 @@
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
@@ -186,9 +189,11 @@
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
@@ -224,7 +229,7 @@
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P6440 is not set
# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
@@ -233,6 +238,7 @@
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
CONFIG_PLAT_SAMSUNG=y
#
@@ -243,11 +249,18 @@
CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S3C_GPIO_PULL_UP=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_ADC=y
CONFIG_S3C_DEV_HSMMC=y
+CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_HWMON=y
+CONFIG_S3C_DEV_FB=y
CONFIG_S3C_DEV_USB_HOST=y
+CONFIG_S3C_DEV_WDT=y
CONFIG_S3C_DEV_NAND=y
CONFIG_S3C_DMA=y
@@ -260,6 +273,7 @@
CONFIG_CPU_LLSERIAL_S3C2410=y
CONFIG_CPU_LLSERIAL_S3C2440=y
CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C2443_CLOCK=y
CONFIG_S3C24XX_DCLK=y
CONFIG_S3C24XX_PWM=y
CONFIG_S3C24XX_GPIO_EXTRA=128
@@ -270,6 +284,7 @@
# CONFIG_S3C2410_DMA_DEBUG is not set
CONFIG_MACH_SMDK=y
CONFIG_S3C24XX_SIMTEC_AUDIO=y
+CONFIG_S3C2410_SETUP_TS=y
#
# S3C2400 Machines
@@ -289,6 +304,7 @@
# CONFIG_H1940BT is not set
CONFIG_PM_H1940=y
CONFIG_MACH_N30=y
+CONFIG_MACH_N35=y
CONFIG_ARCH_BAST=y
CONFIG_MACH_OTOM=y
CONFIG_MACH_AML_M5900=y
@@ -309,6 +325,13 @@
CONFIG_MACH_S3C2413=y
CONFIG_MACH_SMDK2412=y
CONFIG_MACH_VSTMS=y
+CONFIG_CPU_S3C2416=y
+CONFIG_S3C2416_DMA=y
+
+#
+# S3C2416 Machines
+#
+CONFIG_MACH_SMDK2416=y
CONFIG_CPU_S3C2440=y
CONFIG_CPU_S3C2442=y
CONFIG_CPU_S3C244X=y
@@ -320,9 +343,9 @@
# S3C2440 and S3C2442 Machines
#
CONFIG_MACH_ANUBIS=y
-# CONFIG_MACH_NEO1973_GTA02 is not set
+CONFIG_MACH_NEO1973_GTA02=y
CONFIG_MACH_OSIRIS=y
-# CONFIG_MACH_OSIRIS_DVS is not set
+CONFIG_MACH_OSIRIS_DVS=m
CONFIG_MACH_RX3715=y
CONFIG_ARCH_S3C2440=y
CONFIG_MACH_NEXCODER_2440=y
@@ -330,6 +353,7 @@
CONFIG_SMDK2440_CPU2442=y
CONFIG_MACH_AT2440EVB=y
CONFIG_MACH_MINI2440=y
+CONFIG_MACH_RX1950=y
CONFIG_CPU_S3C2443=y
CONFIG_S3C2443_DMA=y
@@ -410,6 +434,7 @@
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
+# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@@ -509,7 +534,9 @@
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -566,6 +593,16 @@
CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_CONNMARK=m
+
+#
+# Xtables targets
+#
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
# CONFIG_NETFILTER_XT_TARGET_CT is not set
@@ -577,9 +614,14 @@
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+
+#
+# Xtables matches
+#
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -598,6 +640,7 @@
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
@@ -605,7 +648,6 @@
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -613,7 +655,6 @@
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
@@ -713,6 +754,7 @@
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
@@ -739,6 +781,7 @@
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
+# CONFIG_BT_L2CAP_EXT_FEATURES is not set
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
@@ -775,6 +818,7 @@
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
@@ -785,6 +829,7 @@
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
#
# Device Drivers
@@ -828,6 +873,7 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
#
@@ -882,9 +928,12 @@
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_S3C2410=y
@@ -1149,6 +1198,7 @@
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
@@ -1212,6 +1262,7 @@
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_S3C2410 is not set
@@ -1248,6 +1299,7 @@
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
@@ -1255,6 +1307,8 @@
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_PCF50633_PMU is not set
+# CONFIG_INPUT_PCF8574 is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
#
@@ -1287,6 +1341,7 @@
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_N_HDLC is not set
+# CONFIG_N_GSM is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
@@ -1324,6 +1379,8 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -1439,7 +1496,16 @@
# AC97 GPIO expanders:
#
# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_CHARGER_PCF50633 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
@@ -1499,6 +1565,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
@@ -1555,7 +1622,7 @@
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
+CONFIG_TPS65010=m
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
@@ -1568,8 +1635,10 @@
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
+CONFIG_MFD_PCF50633=y
# CONFIG_MFD_MC13783 is not set
+# CONFIG_PCF50633_ADC is not set
+CONFIG_PCF50633_GPIO=y
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_AB4500_CORE is not set
@@ -1685,6 +1754,7 @@
CONFIG_SND_S3C_I2SV2_SOC=m
CONFIG_SND_S3C2412_SOC_I2S=m
CONFIG_SND_S3C_SOC_AC97=m
+# CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753 is not set
CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
@@ -1836,10 +1906,12 @@
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
+CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
@@ -1991,6 +2063,7 @@
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_PCF50633 is not set
#
# on-CPU RTC drivers
@@ -1999,10 +2072,6 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -2274,6 +2343,7 @@
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
@@ -2284,6 +2354,7 @@
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index a3a9993..2b64238 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -1,11 +1,14 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34
-# Sat May 22 03:17:32 2010
+# Fri May 28 19:05:39 2010
#
CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
@@ -34,6 +37,7 @@
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
@@ -179,9 +183,11 @@
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
@@ -217,7 +223,7 @@
CONFIG_ARCH_S3C64XX=y
# CONFIG_ARCH_S5P6440 is not set
# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
@@ -226,6 +232,7 @@
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
CONFIG_PLAT_SAMSUNG=y
#
@@ -247,11 +254,17 @@
# CONFIG_S3C_ADC is not set
CONFIG_S3C_DEV_HSMMC=y
CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_HSMMC2=y
+CONFIG_S3C_DEV_HWMON=y
CONFIG_S3C_DEV_I2C1=y
CONFIG_S3C_DEV_FB=y
CONFIG_S3C_DEV_USB_HOST=y
CONFIG_S3C_DEV_USB_HSOTG=y
+CONFIG_S3C_DEV_WDT=y
CONFIG_S3C_DEV_NAND=y
+CONFIG_S3C_DEV_RTC=y
+CONFIG_SAMSUNG_DEV_ADC=y
+CONFIG_SAMSUNG_DEV_TS=y
CONFIG_S3C_DMA=y
#
@@ -260,7 +273,9 @@
# CONFIG_SAMSUNG_PM_DEBUG is not set
# CONFIG_S3C_PM_DEBUG_LED_SMDK is not set
# CONFIG_SAMSUNG_PM_CHECK is not set
+CONFIG_SAMSUNG_WAKEMASK=y
CONFIG_PLAT_S3C64XX=y
+CONFIG_CPU_S3C6400=y
CONFIG_CPU_S3C6410=y
CONFIG_S3C64XX_DMA=y
CONFIG_S3C64XX_SETUP_SDHCI=y
@@ -268,15 +283,18 @@
CONFIG_S3C64XX_SETUP_I2C1=y
CONFIG_S3C64XX_SETUP_FB_24BPP=y
CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y
-# CONFIG_MACH_SMDK6400 is not set
-# CONFIG_MACH_ANW6410 is not set
+CONFIG_MACH_SMDK6400=y
+CONFIG_MACH_ANW6410=y
CONFIG_MACH_SMDK6410=y
CONFIG_SMDK6410_SD_CH0=y
# CONFIG_SMDK6410_SD_CH1 is not set
# CONFIG_SMDK6410_WM1190_EV1 is not set
# CONFIG_SMDK6410_WM1192_EV1 is not set
-# CONFIG_MACH_NCP is not set
-# CONFIG_MACH_HMT is not set
+CONFIG_MACH_NCP=y
+CONFIG_MACH_HMT=y
+CONFIG_MACH_SMARTQ=y
+CONFIG_MACH_SMARTQ5=y
+CONFIG_MACH_SMARTQ7=y
#
# Processor Type
@@ -302,6 +320,7 @@
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_ARM_VIC=y
@@ -352,6 +371,7 @@
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
+# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@@ -430,6 +450,7 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
#
@@ -460,6 +481,9 @@
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -472,9 +496,12 @@
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_S3C2410=y
@@ -483,6 +510,7 @@
# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
@@ -503,6 +531,7 @@
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
@@ -516,12 +545,14 @@
# CONFIG_ISL29003 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
@@ -569,6 +600,7 @@
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
@@ -635,9 +667,12 @@
# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_S3C6400=y
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -673,6 +708,7 @@
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
@@ -682,7 +718,24 @@
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_S3C64XX=m
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
@@ -714,6 +767,9 @@
#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
#
# AC97 GPIO expanders:
@@ -729,6 +785,7 @@
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -750,6 +807,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
@@ -764,6 +822,7 @@
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
@@ -775,6 +834,7 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
@@ -788,9 +848,11 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
+CONFIG_HAVE_S3C2410_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
@@ -823,7 +885,10 @@
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@@ -832,8 +897,47 @@
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_S3C=y
+# CONFIG_FB_S3C_DEBUG_REGWRITE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+CONFIG_LCD_LTV350QV=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_BACKLIGHT_PWM=y
#
# Display device support
@@ -845,6 +949,8 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
@@ -873,10 +979,16 @@
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_S3C24XX_SOC=m
CONFIG_SND_S3C_SOC_AC97=m
+# CONFIG_SND_S3C64XX_SOC_WM8580 is not set
CONFIG_SND_SOC_SMDK_WM9713=m
CONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_SND_SOC_ALL_CODECS is not set
@@ -886,29 +998,197 @@
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+# CONFIG_HID_CANDO is not set
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EGALAX is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
-# Enable Host or Gadget support to see Inventra options
+# Miscellaneous USB options
#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_ZIO is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y
@@ -928,18 +1208,80 @@
# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_SDHCI_S3C=y
# CONFIG_MMC_SDHCI_S3C_DMA is not set
+# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_S3C=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -1033,7 +1375,46 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
@@ -1096,6 +1477,7 @@
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
@@ -1106,6 +1488,7 @@
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig
index 619bfab..532e987 100644
--- a/arch/arm/configs/s5p6440_defconfig
+++ b/arch/arm/configs/s5p6440_defconfig
@@ -1,11 +1,13 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34
-# Sat May 22 03:18:18 2010
+# Wed May 26 19:04:32 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
@@ -33,6 +35,7 @@
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
@@ -178,9 +181,11 @@
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
@@ -216,7 +221,7 @@
# CONFIG_ARCH_S3C64XX is not set
CONFIG_ARCH_S5P6440=y
# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
@@ -225,6 +230,7 @@
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
CONFIG_PLAT_SAMSUNG=y
#
@@ -240,10 +246,15 @@
CONFIG_S3C_GPIO_CFG_S3C24XX=y
CONFIG_S3C_GPIO_CFG_S3C64XX=y
CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S5P_GPIO_DRVSTR=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
# CONFIG_S3C_ADC is not set
+CONFIG_S3C_DEV_WDT=y
+CONFIG_SAMSUNG_DEV_ADC=y
+CONFIG_SAMSUNG_DEV_TS=y
+CONFIG_S3C_PL330_DMA=y
#
# Power management
@@ -276,10 +287,12 @@
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
+CONFIG_PL330=y
#
# Bus support
@@ -326,6 +339,7 @@
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@@ -490,7 +504,9 @@
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_S3C2410 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
@@ -546,6 +562,8 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -593,6 +611,7 @@
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
+CONFIG_HAVE_S3C2410_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
@@ -649,10 +668,6 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -850,6 +865,7 @@
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
@@ -860,6 +876,7 @@
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig
index d7ea275..068219b 100644
--- a/arch/arm/configs/s5p6442_defconfig
+++ b/arch/arm/configs/s5p6442_defconfig
@@ -1,11 +1,13 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34
-# Sat May 22 03:18:19 2010
+# Wed May 26 19:04:34 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
@@ -33,6 +35,7 @@
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
@@ -178,9 +181,11 @@
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
@@ -216,7 +221,7 @@
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P6440 is not set
CONFIG_ARCH_S5P6442=y
-# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PC100 is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
@@ -225,6 +230,7 @@
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
CONFIG_PLAT_SAMSUNG=y
#
@@ -240,10 +246,12 @@
CONFIG_S3C_GPIO_CFG_S3C24XX=y
CONFIG_S3C_GPIO_CFG_S3C64XX=y
CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S5P_GPIO_DRVSTR=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
# CONFIG_S3C_ADC is not set
+CONFIG_S3C_PL330_DMA=y
#
# Power management
@@ -276,10 +284,12 @@
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
+CONFIG_PL330=y
#
# Bus support
@@ -326,6 +336,7 @@
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@@ -471,6 +482,7 @@
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
@@ -525,6 +537,8 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -624,10 +638,6 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -836,6 +846,7 @@
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
@@ -846,6 +857,7 @@
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
index 2053be6..ebc6245 100644
--- a/arch/arm/configs/s5pc100_defconfig
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -1,12 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Wed Jul 1 15:53:07 2009
+# Linux kernel version: 2.6.34
+# Wed May 26 19:04:35 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
-CONFIG_MMU=y
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
+CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
@@ -18,7 +20,9 @@
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
@@ -31,6 +35,13 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
@@ -38,14 +49,15 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
@@ -59,6 +71,7 @@
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -80,19 +93,21 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
@@ -122,25 +137,56 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
@@ -156,6 +202,7 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
@@ -164,39 +211,64 @@
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
CONFIG_ARCH_S5PC100=y
+# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-CONFIG_PLAT_S3C=y
+# CONFIG_PLAT_SPEAR is not set
+CONFIG_PLAT_SAMSUNG=y
#
# Boot options
#
# CONFIG_S3C_BOOT_ERROR_RESET is not set
CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIOLIB_4BIT=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S5P_GPIO_DRVSTR=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+# CONFIG_S3C_ADC is not set
+CONFIG_S3C_DEV_HSMMC=y
+CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_HSMMC2=y
+CONFIG_S3C_DEV_I2C1=y
+CONFIG_S3C_DEV_FB=y
+CONFIG_S3C_PL330_DMA=y
#
# Power management
#
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_PLAT_S5PC1XX=y
-CONFIG_CPU_S5PC100_INIT=y
-CONFIG_CPU_S5PC100_CLOCK=y
-CONFIG_S5PC100_SETUP_I2C0=y
+CONFIG_PLAT_S5P=y
+CONFIG_S5P_EXT_INT=y
CONFIG_CPU_S5PC100=y
+CONFIG_S5PC100_SETUP_FB_24BPP=y
+CONFIG_S5PC100_SETUP_I2C1=y
+CONFIG_S5PC100_SETUP_SDHCI=y
+CONFIG_S5PC100_SETUP_SDHCI_GPIO=y
CONFIG_MACH_SMDKC100=y
#
@@ -206,7 +278,7 @@
CONFIG_CPU_V7=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
@@ -224,11 +296,15 @@
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
+CONFIG_PL330=y
#
# Bus support
@@ -244,8 +320,11 @@
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
@@ -258,12 +337,11 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -274,6 +352,7 @@
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
+# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@@ -317,6 +396,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
@@ -331,6 +411,10 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
@@ -338,9 +422,12 @@
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
@@ -350,18 +437,21 @@
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
+# CONFIG_PHONE is not set
#
# Input device support
@@ -369,6 +459,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -385,13 +476,19 @@
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -399,6 +496,7 @@
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
@@ -418,6 +516,7 @@
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -444,11 +543,16 @@
# Non-8250 serial port support
#
CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S3C6400=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -461,6 +565,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@@ -471,9 +576,11 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@@ -486,20 +593,15 @@
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
@@ -508,13 +610,16 @@
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -523,10 +628,19 @@
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
@@ -535,10 +649,11 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
@@ -549,6 +664,7 @@
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -573,8 +689,10 @@
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
@@ -584,9 +702,8 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -599,10 +716,12 @@
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
@@ -610,10 +729,15 @@
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
@@ -637,7 +761,6 @@
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
@@ -680,13 +803,12 @@
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -710,6 +832,7 @@
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
@@ -758,6 +881,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -772,7 +896,6 @@
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
#
# Partition Types
@@ -789,6 +912,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@@ -826,11 +950,13 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -839,6 +965,7 @@
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
@@ -849,6 +976,7 @@
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -857,8 +985,9 @@
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
+# CONFIG_OC_ETM is not set
CONFIG_DEBUG_S3C_UART=0
#
@@ -867,7 +996,11 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
@@ -884,8 +1017,10 @@
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig
index 796cb78..c4de360 100644
--- a/arch/arm/configs/s5pc110_defconfig
+++ b/arch/arm/configs/s5pc110_defconfig
@@ -1,11 +1,13 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34
-# Sat May 22 03:18:21 2010
+# Wed May 26 19:04:37 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
@@ -35,6 +37,7 @@
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
@@ -180,9 +183,11 @@
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
@@ -218,7 +223,7 @@
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P6440 is not set
# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PC100 is not set
CONFIG_ARCH_S5PV210=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
@@ -227,6 +232,7 @@
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
CONFIG_PLAT_SAMSUNG=y
#
@@ -242,16 +248,22 @@
CONFIG_S3C_GPIO_CFG_S3C24XX=y
CONFIG_S3C_GPIO_CFG_S3C64XX=y
CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S5P_GPIO_DRVSTR=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
# CONFIG_S3C_ADC is not set
+CONFIG_S3C_DEV_WDT=y
+CONFIG_S3C_PL330_DMA=y
#
# Power management
#
CONFIG_PLAT_S5P=y
+CONFIG_S5P_EXT_INT=y
CONFIG_CPU_S5PV210=y
+# CONFIG_MACH_AQUILA is not set
+# CONFIG_MACH_GONI is not set
# CONFIG_MACH_SMDKV210 is not set
CONFIG_MACH_SMDKC110=y
@@ -281,12 +293,14 @@
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
+CONFIG_PL330=y
#
# Bus support
@@ -335,6 +349,7 @@
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@@ -481,6 +496,7 @@
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
@@ -536,6 +552,8 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -583,6 +601,7 @@
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
+CONFIG_HAVE_S3C2410_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
@@ -635,10 +654,6 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -847,6 +862,8 @@
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
@@ -857,6 +874,7 @@
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
index 6831dab..e2f5bce 100644
--- a/arch/arm/configs/s5pv210_defconfig
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -1,11 +1,13 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34
-# Sat May 22 03:18:22 2010
+# Wed May 26 19:04:39 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
@@ -35,6 +37,7 @@
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
@@ -180,9 +183,11 @@
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
@@ -218,7 +223,7 @@
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P6440 is not set
# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PC100 is not set
CONFIG_ARCH_S5PV210=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
@@ -227,6 +232,7 @@
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
CONFIG_PLAT_SAMSUNG=y
#
@@ -242,16 +248,24 @@
CONFIG_S3C_GPIO_CFG_S3C24XX=y
CONFIG_S3C_GPIO_CFG_S3C64XX=y
CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_S5P_GPIO_DRVSTR=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
# CONFIG_S3C_ADC is not set
+CONFIG_S3C_DEV_WDT=y
+CONFIG_SAMSUNG_DEV_ADC=y
+CONFIG_SAMSUNG_DEV_TS=y
+CONFIG_S3C_PL330_DMA=y
#
# Power management
#
CONFIG_PLAT_S5P=y
+CONFIG_S5P_EXT_INT=y
CONFIG_CPU_S5PV210=y
+# CONFIG_MACH_AQUILA is not set
+# CONFIG_MACH_GONI is not set
CONFIG_MACH_SMDKV210=y
# CONFIG_MACH_SMDKC110 is not set
@@ -281,12 +295,14 @@
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
+CONFIG_PL330=y
#
# Bus support
@@ -335,6 +351,7 @@
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_CMDLINE_FORCE is not set
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@@ -481,7 +498,9 @@
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_S3C2410 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
@@ -536,6 +555,8 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@@ -583,6 +604,7 @@
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
+CONFIG_HAVE_S3C2410_WATCHDOG=y
CONFIG_SSB_POSSIBLE=y
#
@@ -635,10 +657,6 @@
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -847,6 +865,8 @@
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
@@ -857,6 +877,7 @@
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h
index bcda59f..2f87870 100644
--- a/arch/arm/include/asm/scatterlist.h
+++ b/arch/arm/include/asm/scatterlist.h
@@ -3,9 +3,6 @@
#include <asm/memory.h>
#include <asm/types.h>
-
#include <asm-generic/scatterlist.h>
-#undef ARCH_HAS_SG_CHAIN
-
#endif /* _ASMARM_SCATTERLIST_H */
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index abd0493..2ec3095 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -17,6 +17,7 @@
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/pca953x.h>
+#include <linux/mfd/tps6507x.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
@@ -24,6 +25,8 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/machine.h>
+#include <linux/mfd/tps6507x.h>
+#include <linux/input/tps6507x-ts.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -533,10 +536,24 @@
},
};
+static struct touchscreen_init_data tps6507x_touchscreen_data = {
+ .poll_period = 30, /* ms between touch samples */
+ .min_pressure = 0x30, /* minimum pressure to trigger touch */
+ .vref = 0, /* turn off vref when not using A/D */
+ .vendor = 0, /* /sys/class/input/input?/id/vendor */
+ .product = 65070, /* /sys/class/input/input?/id/product */
+ .version = 0x100, /* /sys/class/input/input?/id/version */
+};
+
+static struct tps6507x_board tps_board = {
+ .tps6507x_pmic_init_data = &tps65070_regulator_data[0],
+ .tps6507x_ts_init_data = &tps6507x_touchscreen_data,
+};
+
static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
{
I2C_BOARD_INFO("tps6507x", 0x48),
- .platform_data = &tps65070_regulator_data[0],
+ .platform_data = &tps_board,
},
};
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
index 5a85e24..d4f1e96 100644
--- a/arch/arm/mach-davinci/include/mach/mmc.h
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -22,6 +22,9 @@
/* Version of the MMC/SD controller */
u8 version;
+
+ /* Number of sg segments */
+ u8 nr_sg;
};
void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-imx/Kconfig
similarity index 63%
rename from arch/arm/mach-mx2/Kconfig
rename to arch/arm/mach-imx/Kconfig
index 3f756f4..c5c0369 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,42 +1,103 @@
+config IMX_HAVE_DMA_V1
+ bool
+
+if ARCH_MX1
+
+config SOC_IMX1
+ select CPU_ARM920T
+ select IMX_HAVE_DMA_V1
+ select IMX_HAVE_IOMUX_V1
+ bool
+
+comment "MX1 platforms:"
+config MACH_MXLADS
+ bool
+
+config ARCH_MX1ADS
+ bool "MX1ADS platform"
+ select MACH_MXLADS
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ help
+ Say Y here if you are using Motorola MX1ADS/MXLADS boards
+
+config MACH_SCB9328
+ bool "Synertronixx scb9328"
+ select IMX_HAVE_PLATFORM_IMX_UART
+ help
+ Say Y here if you are using a Synertronixx scb9328 board
+
+endif
+
if ARCH_MX2
+config SOC_IMX21
+ select CPU_ARM926T
+ select ARCH_MXC_AUDMUX_V1
+ select IMX_HAVE_DMA_V1
+ select IMX_HAVE_IOMUX_V1
+ bool
+
+config SOC_IMX27
+ select CPU_ARM926T
+ select ARCH_MXC_AUDMUX_V1
+ select IMX_HAVE_DMA_V1
+ select IMX_HAVE_IOMUX_V1
+ bool
+
choice
prompt "CPUs:"
default MACH_MX21
config MACH_MX21
bool "i.MX21 support"
- select ARCH_MXC_AUDMUX_V1
+ select SOC_IMX21
help
This enables support for Freescale's MX2 based i.MX21 processor.
config MACH_MX27
bool "i.MX27 support"
- select ARCH_MXC_AUDMUX_V1
+ select SOC_IMX27
help
This enables support for Freescale's MX2 based i.MX27 processor.
endchoice
-comment "MX2 platforms:"
+endif
+
+if MACH_MX21
+
+comment "MX21 platforms:"
config MACH_MX21ADS
bool "MX21ADS platform"
- depends on MACH_MX21
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
help
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
+endif
+
+if MACH_MX27
+
+comment "MX27 platforms:"
+
config MACH_MX27ADS
bool "MX27ADS platform"
- depends on MACH_MX27
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
help
Include support for MX27ADS platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCM038
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
- depends on MACH_MX27
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
@@ -58,8 +119,9 @@
config MACH_CPUIMX27
bool "Eukrea CPUIMX27 module"
- depends on MACH_MX27
- select MXC_ULPI if USB_ULPI
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
help
Include support for Eukrea CPUIMX27 platform. This includes
specific configurations for the module and its peripherals.
@@ -86,6 +148,8 @@
config MACH_EUKREA_MBIMX27_BASEBOARD
prompt "Eukrea MBIMX27 development board"
bool
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SPI_IMX
help
This adds board specific devices that can be found on Eukrea's
MBIMX27 evaluation board.
@@ -94,21 +158,24 @@
config MACH_MX27_3DS
bool "MX27PDK platform"
- depends on MACH_MX27
+ select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_IMX27LITE
bool "LogicPD MX27 LITEKIT platform"
- depends on MACH_MX27
+ select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for MX27 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
- depends on MACH_MX27
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
Include support for phyCARD-s (aka pca100) platform. This
@@ -116,7 +183,9 @@
config MACH_MXT_TD60
bool "Maxtrack i-MXT TD60"
- depends on MACH_MX27
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
help
Include support for i-MXT (aka td60) platform. This
includes specific configurations for the module and its peripherals.
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
new file mode 100644
index 0000000..46a9fdf
--- /dev/null
+++ b/arch/arm/mach-imx/Makefile
@@ -0,0 +1,33 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := devices.o
+
+obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
+
+obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
+obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
+
+obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
+obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o
+
+# Support for CMOS sensor interface
+obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
+
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
+
+obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+
+obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
+obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
+obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
+obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
similarity index 67%
rename from arch/arm/mach-mx2/Makefile.boot
rename to arch/arm/mach-imx/Makefile.boot
index e867398..7988a85 100644
--- a/arch/arm/mach-mx2/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -1,3 +1,7 @@
+zreladdr-$(CONFIG_ARCH_MX1) := 0x08008000
+params_phys-$(CONFIG_ARCH_MX1) := 0x08000100
+initrd_phys-$(CONFIG_ARCH_MX1) := 0x08800000
+
zreladdr-$(CONFIG_MACH_MX21) := 0xC0008000
params_phys-$(CONFIG_MACH_MX21) := 0xC0000100
initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-imx/clock-imx1.c
similarity index 89%
rename from arch/arm/mach-mx1/clock.c
rename to arch/arm/mach-imx/clock-imx1.c
index 6cf2d4a..c05096c 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-imx/clock-imx1.c
@@ -2,18 +2,17 @@
* Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include <linux/kernel.h>
@@ -29,7 +28,41 @@
#include <mach/clock.h>
#include <mach/hardware.h>
#include <mach/common.h>
-#include "crm_regs.h"
+
+#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
+
+/* CCM register addresses */
+#define CCM_CSCR IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
+#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
+#define CCM_PCDR IO_ADDR_CCM(0x20)
+
+#define CCM_CSCR_CLKO_OFFSET 29
+#define CCM_CSCR_CLKO_MASK (0x7 << 29)
+#define CCM_CSCR_USB_OFFSET 26
+#define CCM_CSCR_USB_MASK (0x7 << 26)
+#define CCM_CSCR_OSC_EN_SHIFT 17
+#define CCM_CSCR_SYSTEM_SEL (1 << 16)
+#define CCM_CSCR_BCLK_OFFSET 10
+#define CCM_CSCR_BCLK_MASK (0xf << 10)
+#define CCM_CSCR_PRESC (1 << 15)
+
+#define CCM_PCDR_PCLK3_OFFSET 16
+#define CCM_PCDR_PCLK3_MASK (0x7f << 16)
+#define CCM_PCDR_PCLK2_OFFSET 4
+#define CCM_PCDR_PCLK2_MASK (0xf << 4)
+#define CCM_PCDR_PCLK1_OFFSET 0
+#define CCM_PCDR_PCLK1_MASK 0xf
+
+#define IO_ADDR_SCM(off) (MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
+
+/* SCM register addresses */
+#define SCM_GCCR IO_ADDR_SCM(0xc)
+
+#define SCM_GCCR_DMA_CLK_EN_OFFSET 3
+#define SCM_GCCR_CSI_CLK_EN_OFFSET 2
+#define SCM_GCCR_MMA_CLK_EN_OFFSET 1
+#define SCM_GCCR_USBD_CLK_EN_OFFSET 0
static int _clk_enable(struct clk *clk)
{
@@ -596,7 +629,8 @@
clk_enable(&hclk);
clk_enable(&fclk);
- mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
+ mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
+ MX1_TIM1_INT);
return 0;
}
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-imx/clock-imx21.c
similarity index 100%
rename from arch/arm/mach-mx2/clock_imx21.c
rename to arch/arm/mach-imx/clock-imx21.c
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-imx/clock-imx27.c
similarity index 100%
rename from arch/arm/mach-mx2/clock_imx27.c
rename to arch/arm/mach-imx/clock-imx27.c
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-imx/cpu-imx27.c
similarity index 100%
rename from arch/arm/mach-mx2/cpu_imx27.c
rename to arch/arm/mach-imx/cpu-imx27.c
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
new file mode 100644
index 0000000..a8d94f0
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx1.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx1.h>
+#include <mach/devices-common.h>
+
+#define imx1_add_i2c_imx(pdata) \
+ imx_add_imx_i2c(0, MX1_I2C_BASE_ADDR, SZ_4K, MX1_INT_I2C, pdata)
+
+#define imx1_add_imx_uart0(pdata) \
+ imx_add_imx_uart_3irq(0, MX1_UART1_BASE_ADDR, 0xd0, MX1_INT_UART1RX, MX1_INT_UART1TX, MX1_INT_UART1RTS, pdata)
+#define imx1_add_imx_uart1(pdata) \
+ imx_add_imx_uart_3irq(0, MX1_UART2_BASE_ADDR, 0xd0, MX1_INT_UART2RX, MX1_INT_UART2TX, MX1_INT_UART2RTS, pdata)
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
new file mode 100644
index 0000000..42788e9
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx21.h>
+#include <mach/devices-common.h>
+
+#define imx21_add_i2c_imx(pdata) \
+ imx_add_imx_i2c(0, MX2x_I2C_BASE_ADDR, SZ_4K, MX2x_INT_I2C, pdata)
+
+#define imx21_add_imx_uart0(pdata) \
+ imx_add_imx_uart_1irq(0, MX21_UART1_BASE_ADDR, SZ_4K, MX21_INT_UART1, pdata)
+#define imx21_add_imx_uart1(pdata) \
+ imx_add_imx_uart_1irq(1, MX21_UART2_BASE_ADDR, SZ_4K, MX21_INT_UART2, pdata)
+#define imx21_add_imx_uart2(pdata) \
+ imx_add_imx_uart_1irq(2, MX21_UART3_BASE_ADDR, SZ_4K, MX21_INT_UART3, pdata)
+#define imx21_add_imx_uart3(pdata) \
+ imx_add_imx_uart_1irq(3, MX21_UART4_BASE_ADDR, SZ_4K, MX21_INT_UART4, pdata)
+
+#define imx21_add_mxc_nand(pdata) \
+ imx_add_mxc_nand_v1(MX21_NFC_BASE_ADDR, MX21_INT_NANDFC, pdata)
+
+#define imx21_add_spi_imx0(pdata) \
+ imx_add_spi_imx(0, MX21_CSPI1_BASE_ADDR, SZ_4K, MX21_INT_CSPI1, pdata)
+#define imx21_add_spi_imx1(pdata) \
+ imx_add_spi_imx(1, MX21_CSPI2_BASE_ADDR, SZ_4K, MX21_INT_CSPI2, pdata)
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
new file mode 100644
index 0000000..65e7bb7
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx27.h>
+#include <mach/devices-common.h>
+
+#define imx27_add_i2c_imx0(pdata) \
+ imx_add_imx_i2c(0, MX27_I2C1_BASE_ADDR, SZ_4K, MX27_INT_I2C1, pdata)
+#define imx27_add_i2c_imx1(pdata) \
+ imx_add_imx_i2c(1, MX27_I2C2_BASE_ADDR, SZ_4K, MX27_INT_I2C2, pdata)
+
+#define imx27_add_imx_uart0(pdata) \
+ imx_add_imx_uart_1irq(0, MX27_UART1_BASE_ADDR, SZ_4K, MX27_INT_UART1, pdata)
+#define imx27_add_imx_uart1(pdata) \
+ imx_add_imx_uart_1irq(1, MX27_UART2_BASE_ADDR, SZ_4K, MX27_INT_UART2, pdata)
+#define imx27_add_imx_uart2(pdata) \
+ imx_add_imx_uart_1irq(2, MX27_UART3_BASE_ADDR, SZ_4K, MX27_INT_UART3, pdata)
+#define imx27_add_imx_uart3(pdata) \
+ imx_add_imx_uart_1irq(3, MX27_UART4_BASE_ADDR, SZ_4K, MX27_INT_UART4, pdata)
+#define imx27_add_imx_uart4(pdata) \
+ imx_add_imx_uart_1irq(4, MX27_UART5_BASE_ADDR, SZ_4K, MX27_INT_UART5, pdata)
+#define imx27_add_imx_uart5(pdata) \
+ imx_add_imx_uart_1irq(5, MX27_UART6_BASE_ADDR, SZ_4K, MX27_INT_UART6, pdata)
+
+#define imx27_add_mxc_nand(pdata) \
+ imx_add_mxc_nand_v1(MX27_NFC_BASE_ADDR, MX27_INT_NANDFC, pdata)
+
+#define imx27_add_spi_imx0(pdata) \
+ imx_add_spi_imx(0, MX27_CSPI1_BASE_ADDR, SZ_4K, MX27_INT_CSPI1, pdata)
+#define imx27_add_spi_imx1(pdata) \
+ imx_add_spi_imx(1, MX27_CSPI2_BASE_ADDR, SZ_4K, MX27_INT_CSPI2, pdata)
+#define imx27_add_spi_imx2(pdata) \
+ imx_add_spi_imx(2, MX27_CSPI3_BASE_ADDR, SZ_4K, MX27_INT_CSPI3, pdata)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-imx/devices.c
similarity index 75%
rename from arch/arm/mach-mx2/devices.c
rename to arch/arm/mach-imx/devices.c
index 28caa21..9c271a7 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-imx/devices.c
@@ -11,6 +11,9 @@
*
* Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -32,6 +35,7 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/dma-mapping.h>
+#include <linux/serial.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
@@ -40,6 +44,150 @@
#include "devices.h"
+#if defined(CONFIG_ARCH_MX1)
+static struct resource imx1_camera_resources[] = {
+ {
+ .start = 0x00224000,
+ .end = 0x00224010,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX1_CSI_INT,
+ .end = MX1_CSI_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 imx1_camera_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device imx1_camera_device = {
+ .name = "mx1-camera",
+ .id = 0, /* This is used to put cameras on this interface */
+ .dev = {
+ .dma_mask = &imx1_camera_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = imx1_camera_resources,
+ .num_resources = ARRAY_SIZE(imx1_camera_resources),
+};
+
+static struct resource imx_rtc_resources[] = {
+ {
+ .start = 0x00204000,
+ .end = 0x00204024,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX1_RTC_INT,
+ .end = MX1_RTC_INT,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MX1_RTC_SAMINT,
+ .end = MX1_RTC_SAMINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device imx_rtc_device = {
+ .name = "rtc-imx",
+ .id = 0,
+ .resource = imx_rtc_resources,
+ .num_resources = ARRAY_SIZE(imx_rtc_resources),
+};
+
+static struct resource imx_wdt_resources[] = {
+ {
+ .start = 0x00201000,
+ .end = 0x00201008,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX1_WDT_INT,
+ .end = MX1_WDT_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device imx_wdt_device = {
+ .name = "imx-wdt",
+ .id = 0,
+ .resource = imx_wdt_resources,
+ .num_resources = ARRAY_SIZE(imx_wdt_resources),
+};
+
+static struct resource imx_usb_resources[] = {
+ {
+ .start = 0x00212000,
+ .end = 0x00212148,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX1_USBD_INT0,
+ .end = MX1_USBD_INT0,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MX1_USBD_INT1,
+ .end = MX1_USBD_INT1,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MX1_USBD_INT2,
+ .end = MX1_USBD_INT2,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MX1_USBD_INT3,
+ .end = MX1_USBD_INT3,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MX1_USBD_INT4,
+ .end = MX1_USBD_INT4,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MX1_USBD_INT5,
+ .end = MX1_USBD_INT5,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = MX1_USBD_INT6,
+ .end = MX1_USBD_INT6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device imx_usb_device = {
+ .name = "imx_udc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(imx_usb_resources),
+ .resource = imx_usb_resources,
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port imx_gpio_ports[] = {
+ {
+ .chip.label = "gpio-0",
+ .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
+ .irq = MX1_GPIO_INT_PORTA,
+ .virtual_irq_start = MXC_GPIO_IRQ_START,
+ }, {
+ .chip.label = "gpio-1",
+ .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
+ .irq = MX1_GPIO_INT_PORTB,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+ }, {
+ .chip.label = "gpio-2",
+ .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
+ .irq = MX1_GPIO_INT_PORTC,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+ }, {
+ .chip.label = "gpio-3",
+ .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
+ .irq = MX1_GPIO_INT_PORTD,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+ }
+};
+
+int __init imx1_register_gpios(void)
+{
+ return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
+#endif
+
+#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
+
#ifdef CONFIG_MACH_MX27
static struct resource mx27_camera_resources[] = {
{
@@ -72,40 +220,6 @@
#endif
/*
- * SPI master controller
- *
- * - i.MX1: 2 channel (slighly different register setting)
- * - i.MX21: 2 channel
- * - i.MX27: 3 channel
- */
-#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq) \
- static struct resource mxc_spi_resources ## n[] = { \
- { \
- .start = baseaddr, \
- .end = baseaddr + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, { \
- .start = irq, \
- .end = irq, \
- .flags = IORESOURCE_IRQ, \
- }, \
- }; \
- \
- struct platform_device mxc_spi_device ## n = { \
- .name = "spi_imx", \
- .id = n, \
- .num_resources = ARRAY_SIZE(mxc_spi_resources ## n), \
- .resource = mxc_spi_resources ## n, \
- }
-
-DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1);
-DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2);
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3);
-#endif
-
-/*
* General Purpose Timer
* - i.MX21: 3 timers
* - i.MX27: 6 timers
@@ -171,34 +285,6 @@
.resource = mxc_w1_master_resources,
};
-#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq) \
- static struct resource pfx ## _nand_resources[] = { \
- { \
- .start = baseaddr, \
- .end = baseaddr + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, { \
- .start = irq, \
- .end = irq, \
- .flags = IORESOURCE_IRQ, \
- }, \
- }; \
- \
- struct platform_device pfx ## _nand_device = { \
- .name = "mxc_nand", \
- .id = 0, \
- .num_resources = ARRAY_SIZE(pfx ## _nand_resources), \
- .resource = pfx ## _nand_resources, \
- }
-
-#ifdef CONFIG_MACH_MX21
-DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC);
-#endif
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC);
-#endif
-
/*
* lcdc:
* - i.MX1: the basic controller
@@ -249,32 +335,6 @@
};
#endif
-#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq) \
- static struct resource mxc_i2c_resources ## n[] = { \
- { \
- .start = baseaddr, \
- .end = baseaddr + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, { \
- .start = irq, \
- .end = irq, \
- .flags = IORESOURCE_IRQ, \
- } \
- }; \
- \
- struct platform_device mxc_i2c_device ## n = { \
- .name = "imx-i2c", \
- .id = n, \
- .num_resources = ARRAY_SIZE(mxc_i2c_resources ## n), \
- .resource = mxc_i2c_resources ## n, \
- }
-
-DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C);
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2);
-#endif
-
static struct resource mxc_pwm_resources[] = {
{
.start = MX2x_PWM_BASE_ADDR,
@@ -485,26 +545,21 @@
#ifdef CONFIG_MACH_MX21
DEFINE_MXC_GPIO_PORTS(MX21, imx21);
+
+int __init imx21_register_gpios(void)
+{
+ return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
+}
#endif
#ifdef CONFIG_MACH_MX27
DEFINE_MXC_GPIO_PORTS(MX27, imx27);
-#endif
-int __init mxc_register_gpios(void)
+int __init imx27_register_gpios(void)
{
-#ifdef CONFIG_MACH_MX21
- if (cpu_is_mx21())
- return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
- else
-#endif
-#ifdef CONFIG_MACH_MX27
- if (cpu_is_mx27())
- return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
- else
-#endif
- return 0;
+ return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
}
+#endif
#ifdef CONFIG_MACH_MX21
static struct resource mx21_usbhc_resources[] = {
@@ -550,3 +605,5 @@
.num_resources = ARRAY_SIZE(imx_kpp_resources),
.resource = imx_kpp_resources,
};
+
+#endif
diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h
new file mode 100644
index 0000000..efd4527
--- /dev/null
+++ b/arch/arm/mach-imx/devices.h
@@ -0,0 +1,32 @@
+#ifdef CONFIG_ARCH_MX1
+extern struct platform_device imx1_camera_device;
+extern struct platform_device imx_rtc_device;
+extern struct platform_device imx_wdt_device;
+extern struct platform_device imx_usb_device;
+#endif
+
+#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
+extern struct platform_device mxc_gpt1;
+extern struct platform_device mxc_gpt2;
+#ifdef CONFIG_MACH_MX27
+extern struct platform_device mxc_gpt3;
+extern struct platform_device mxc_gpt4;
+extern struct platform_device mxc_gpt5;
+#endif
+extern struct platform_device mxc_wdt;
+extern struct platform_device mxc_w1_master_device;
+extern struct platform_device mxc_fb_device;
+extern struct platform_device mxc_fec_device;
+extern struct platform_device mxc_pwm_device;
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mx27_camera_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mx21_usbhc_device;
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
+extern struct platform_device imx_kpp_device;
+#endif
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/mach-imx/dma-v1.c
similarity index 98%
rename from arch/arm/plat-mxc/dma-mx1-mx2.c
rename to arch/arm/mach-imx/dma-v1.c
index e16014b..fd1d919 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/mach-imx/dma-v1.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/plat-mxc/dma-mx1-mx2.c
+ * linux/arch/arm/plat-mxc/dma-v1.c
*
* i.MX DMA registration and IRQ dispatching
*
@@ -34,7 +34,7 @@
#include <asm/system.h>
#include <asm/irq.h>
#include <mach/hardware.h>
-#include <mach/dma-mx1-mx2.h>
+#include <mach/dma-v1.h>
#define DMA_DCR 0x00 /* Control Register */
#define DMA_DISR 0x04 /* Interrupt status Register */
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
similarity index 94%
rename from arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
rename to arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index d66a6c4..27e7226 100644
--- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -35,11 +35,11 @@
#include <mach/imxfb.h>
#include <mach/hardware.h>
#include <mach/mmc.h>
-#include <mach/imx-uart.h>
#include <mach/spi.h>
#include <mach/ssi.h>
#include <mach/audmux.h>
+#include "devices-imx27.h"
#include "devices.h"
static int eukrea_mbimx27_pins[] = {
@@ -247,16 +247,8 @@
.dev.platform_data = &eukrea_mbimx27_lcd_power_data,
};
-static struct imxuart_platform_data uart_pdata[] = {
- {
- .flags = IMXUART_HAVE_RTSCTS,
- },
- {
- .flags = IMXUART_HAVE_RTSCTS,
- },
- {
- .flags = IMXUART_HAVE_RTSCTS,
- },
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
};
#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
@@ -305,7 +297,7 @@
static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
-static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
+static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
.chipselect = eukrea_mbimx27_spi_cs,
.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
};
@@ -353,10 +345,10 @@
);
#endif
- mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
- mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
+ imx27_add_imx_uart1(&uart_pdata);
+ imx27_add_imx_uart2(&uart_pdata);
#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
- mxc_register_device(&mxc_uart_device3, &uart_pdata[2]);
+ imx27_add_imx_uart3(&uart_pdata);
#endif
mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
@@ -377,7 +369,7 @@
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
/* SPI_CS0 init */
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
- mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
+ imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
spi_register_board_info(eukrea_mbimx27_spi_board_info,
ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
#endif
diff --git a/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
new file mode 100644
index 0000000..df5f522
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
@@ -0,0 +1,10 @@
+#ifndef __MACH_DMA_MX1_MX2_H__
+#define __MACH_DMA_MX1_MX2_H__
+/*
+ * Don't use this header in new code, it will go away when all users are
+ * converted to mach/dma-v1.h
+ */
+
+#include <mach/dma-v1.h>
+
+#endif /* ifndef __MACH_DMA_MX1_MX2_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-v1.h
similarity index 92%
rename from arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
rename to arch/arm/mach-imx/include/mach/dma-v1.h
index 7c4870b..287431c 100644
--- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+++ b/arch/arm/mach-imx/include/mach/dma-v1.h
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+ * linux/arch/arm/mach-imx/include/mach/dma-v1.h
*
* i.MX DMA registration and IRQ dispatching
*
@@ -22,8 +22,10 @@
* MA 02110-1301, USA.
*/
-#ifndef __ASM_ARCH_MXC_DMA_H
-#define __ASM_ARCH_MXC_DMA_H
+#ifndef __MACH_DMA_V1_H__
+#define __MACH_DMA_V1_H__
+
+#define imx_has_dma_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
#define IMX_DMA_CHANNELS 16
@@ -102,4 +104,4 @@
int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio);
-#endif /* _ASM_ARCH_MXC_DMA_H */
+#endif /* __MACH_DMA_V1_H__ */
diff --git a/arch/arm/mach-mx2/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
similarity index 92%
rename from arch/arm/mach-mx2/mach-cpuimx27.c
rename to arch/arm/mach-imx/mach-cpuimx27.c
index 5529178..2a13544 100644
--- a/arch/arm/mach-mx2/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -38,13 +38,12 @@
#include <mach/board-eukrea_cpuimx27.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/i2c.h>
#include <mach/iomux-mx27.h>
-#include <mach/imx-uart.h>
#include <mach/mxc_nand.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
+#include "devices-imx27.h"
#include "devices.h"
static int eukrea_cpuimx27_pins[] = {
@@ -146,15 +145,12 @@
.resource = &eukrea_cpuimx27_flash_resource,
};
-static struct imxuart_platform_data uart_pdata[] = {
- {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- },
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
};
-static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+static const struct mxc_nand_platform_data
+cpuimx27_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
@@ -166,7 +162,7 @@
&mxc_w1_master_device,
};
-static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
.bitrate = 100000,
};
@@ -256,15 +252,14 @@
mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
- mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+ imx27_add_imx_uart0(&uart_pdata);
- mxc_register_device(&imx27_nand_device,
- &eukrea_cpuimx27_nand_board_info);
+ imx27_add_mxc_nand(&cpuimx27_nand_board_info);
i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
- mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+ imx27_add_i2c_imx1(&cpuimx27_i2c1_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
@@ -274,7 +269,7 @@
#endif
#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
/* in which case UART4 is also used for Bluetooth */
- mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+ imx27_add_imx_uart3(&uart_pdata);
#endif
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
diff --git a/arch/arm/mach-mx2/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
similarity index 85%
rename from arch/arm/mach-mx2/mach-imx27lite.c
rename to arch/arm/mach-imx/mach-imx27lite.c
index b5710bf..22a2b5d 100644
--- a/arch/arm/mach-mx2/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/platform_device.h>
@@ -26,10 +22,9 @@
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx27.h>
-#include <mach/board-mx27lite.h>
+#include "devices-imx27.h"
#include "devices.h"
static unsigned int mx27lite_pins[] = {
@@ -59,7 +54,7 @@
PF23_AIN_FEC_TX_EN,
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -71,7 +66,7 @@
{
mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
"imx27lite");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ imx27_add_imx_uart0(&uart_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
diff --git a/arch/arm/mach-mx1/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
similarity index 81%
rename from arch/arm/mach-mx1/mach-mx1ads.c
rename to arch/arm/mach-imx/mach-mx1ads.c
index 51f3cfd..77a760c 100644
--- a/arch/arm/mach-mx1/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -26,10 +26,10 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx1.h>
#include <mach/irqs.h>
+#include "devices-imx1.h"
#include "devices.h"
static int mx1ads_pins[] = {
@@ -58,12 +58,12 @@
* UARTs platform data
*/
-static struct imxuart_platform_data uart_pdata[] = {
- {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- },
+static const struct imxuart_platform_data uart0_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct imxuart_platform_data uart1_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
};
/*
@@ -75,8 +75,8 @@
};
static struct resource flash_resource = {
- .start = IMX_CS0_PHYS,
- .end = IMX_CS0_PHYS + SZ_32M - 1,
+ .start = MX1_CS0_PHYS,
+ .end = MX1_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
@@ -98,7 +98,7 @@
}
};
-static struct imxi2c_platform_data mx1ads_i2c_data = {
+static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = {
.bitrate = 100000,
};
@@ -121,8 +121,8 @@
ARRAY_SIZE(mx1ads_pins), "mx1ads");
/* UART */
- mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
- mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
+ imx1_add_imx_uart0(&uart0_pdata);
+ imx1_add_imx_uart1(&uart1_pdata);
/* Physmap flash */
mxc_register_device(&flash_device, &mx1ads_flash_data);
@@ -131,7 +131,7 @@
i2c_register_board_info(0, mx1ads_i2c_devices,
ARRAY_SIZE(mx1ads_i2c_devices));
- mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
+ imx1_add_i2c_imx(&mx1ads_i2c_data);
}
static void __init mx1ads_timer_init(void)
@@ -145,8 +145,8 @@
MACHINE_START(MX1ADS, "Freescale MX1ADS")
/* Maintainer: Sascha Hauer, Pengutronix */
- .phys_io = IMX_IO_PHYS,
- .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
+ .phys_io = MX1_IO_BASE_ADDR,
+ .io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX1_PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
.init_irq = mx1_init_irq,
@@ -155,8 +155,8 @@
MACHINE_END
MACHINE_START(MXLADS, "Freescale MXLADS")
- .phys_io = IMX_IO_PHYS,
- .io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
+ .phys_io = MX1_IO_BASE_ADDR,
+ .io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX1_PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
.init_irq = mx1_init_irq,
diff --git a/arch/arm/mach-mx2/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
similarity index 77%
rename from arch/arm/mach-mx2/mach-mx21ads.c
rename to arch/arm/mach-imx/mach-mx21ads.c
index 113e58d..96d7f81 100644
--- a/arch/arm/mach-mx2/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/platform_device.h>
@@ -28,15 +24,49 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/imx-uart.h>
#include <mach/imxfb.h>
#include <mach/iomux-mx21.h>
#include <mach/mxc_nand.h>
#include <mach/mmc.h>
-#include <mach/board-mx21ads.h>
+#include "devices-imx21.h"
#include "devices.h"
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR 0xf5000000
+#define MX21ADS_MMIO_SIZE SZ_16M
+
+#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
+ (MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP 0x0001 /* read */
+#define MX21ADS_IO_TP6 0x0001 /* write */
+#define MX21ADS_IO_SW_SEL 0x0002 /* read */
+#define MX21ADS_IO_TP7 0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE 0x0008
+#define MX21ADS_IO_CSI_CTL2 0x0010
+#define MX21ADS_IO_CSI_CTL1 0x0020
+#define MX21ADS_IO_CSI_CTL0 0x0040
+#define MX21ADS_IO_UART1_EN 0x0080
+#define MX21ADS_IO_UART4_EN 0x0100
+#define MX21ADS_IO_LCDON 0x0200
+#define MX21ADS_IO_IRDA_EN 0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B 0x1000
+#define MX21ADS_IO_IRDA_MD1 0x2000
+#define MX21ADS_IO_LED4_ON 0x4000
+#define MX21ADS_IO_LED3_ON 0x8000
+
static unsigned int mx21ads_pins[] = {
/* CS8900A */
@@ -133,14 +163,13 @@
.resource = &mx21ads_flash_resource,
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata_rts __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct imxuart_platform_data uart_norts_pdata = {
+static const struct imxuart_platform_data uart_pdata_norts __initconst = {
};
-
static int mx21ads_fb_init(struct platform_device *pdev)
{
u16 tmp;
@@ -227,7 +256,8 @@
.exit = mx21ads_sdhc_exit,
};
-static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx21ads_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
@@ -263,12 +293,12 @@
mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
"mx21ads");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
- mxc_register_device(&mxc_uart_device3, &uart_pdata);
+ imx21_add_imx_uart0(&uart_pdata_rts);
+ imx21_add_imx_uart2(&uart_pdata_norts);
+ imx21_add_imx_uart3(&uart_pdata_rts);
mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
- mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info);
+ imx21_add_mxc_nand(&mx21ads_nand_board_info);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
diff --git a/arch/arm/mach-mx2/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
similarity index 85%
rename from arch/arm/mach-mx2/mach-mx27_3ds.c
rename to arch/arm/mach-imx/mach-mx27_3ds.c
index b2f4e0d..e2a82ba 100644
--- a/arch/arm/mach-mx2/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -12,10 +12,12 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * This machine is known as:
+ * - i.MX27 3-Stack Development System
+ * - i.MX27 Platform Development Kit (i.MX27 PDK)
*/
#include <linux/platform_device.h>
@@ -25,10 +27,9 @@
#include <asm/mach/time.h>
#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx27.h>
-#include <mach/board-mx27pdk.h>
+#include "devices-imx27.h"
#include "devices.h"
static unsigned int mx27pdk_pins[] = {
@@ -58,7 +59,7 @@
PF23_AIN_FEC_TX_EN,
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -70,7 +71,7 @@
{
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
"mx27pdk");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ imx27_add_imx_uart0(&uart_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
diff --git a/arch/arm/mach-mx2/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
similarity index 82%
rename from arch/arm/mach-mx2/mach-mx27ads.c
rename to arch/arm/mach-imx/mach-mx27ads.c
index 6ce3236..9c77da9 100644
--- a/arch/arm/mach-mx2/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/platform_device.h>
@@ -32,16 +28,44 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <mach/gpio.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx27.h>
-#include <mach/board-mx27ads.h>
#include <mach/mxc_nand.h>
-#include <mach/i2c.h>
#include <mach/imxfb.h>
#include <mach/mmc.h>
+#include "devices-imx27.h"
#include "devices.h"
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS 0xf4300000
+#define PBC_REG_ADDR(offset) (void __force __iomem *) \
+ (PBC_BASE_ADDRESS + (offset))
+
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH 0
+
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */
+
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET (1 << 3)
+
static unsigned int mx27ads_pins[] = {
/* UART0 */
PE12_PF_UART1_TXD,
@@ -141,7 +165,8 @@
PB9_PF_SD2_CLK,
};
-static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx27ads_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
@@ -168,7 +193,7 @@
.resource = &mx27ads_flash_resource,
};
-static struct imxi2c_platform_data mx27ads_i2c_data = {
+static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
.bitrate = 100000,
};
@@ -263,20 +288,8 @@
&mxc_w1_master_device,
};
-static struct imxuart_platform_data uart_pdata[] = {
- {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- },
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
};
static void __init mx27ads_board_init(void)
@@ -284,18 +297,18 @@
mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
"mx27ads");
- mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
- mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
- mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
- mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
- mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
- mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
- mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
+ imx27_add_imx_uart0(&uart_pdata);
+ imx27_add_imx_uart1(&uart_pdata);
+ imx27_add_imx_uart2(&uart_pdata);
+ imx27_add_imx_uart3(&uart_pdata);
+ imx27_add_imx_uart4(&uart_pdata);
+ imx27_add_imx_uart5(&uart_pdata);
+ imx27_add_mxc_nand(&mx27ads_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, mx27ads_i2c_devices,
ARRAY_SIZE(mx27ads_i2c_devices));
- mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+ imx27_add_i2c_imx1(&mx27ads_i2c1_data);
mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
@@ -342,4 +355,3 @@
.init_machine = mx27ads_board_init,
.timer = &mx27ads_timer,
MACHINE_END
-
diff --git a/arch/arm/mach-mx2/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
similarity index 85%
rename from arch/arm/mach-mx2/mach-mxt_td60.c
rename to arch/arm/mach-imx/mach-mxt_td60.c
index bc38559..a3a1e45 100644
--- a/arch/arm/mach-mx2/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/platform_device.h>
@@ -32,14 +28,13 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <linux/gpio.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx27.h>
#include <mach/mxc_nand.h>
-#include <mach/i2c.h>
#include <linux/i2c/pca953x.h>
#include <mach/imxfb.h>
#include <mach/mmc.h>
+#include "devices-imx27.h"
#include "devices.h"
static unsigned int mxt_td60_pins[] __initdata = {
@@ -128,12 +123,13 @@
PB9_PF_SD2_CLK,
};
-static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
+static const struct mxc_nand_platform_data
+mxt_td60_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
-static struct imxi2c_platform_data mxt_td60_i2c_data = {
+static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = {
.bitrate = 100000,
};
@@ -173,7 +169,7 @@
},
};
-static struct imxi2c_platform_data mxt_td60_i2c2_data = {
+static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = {
.bitrate = 100000,
};
@@ -239,14 +235,8 @@
&mxc_fec_device,
};
-static struct imxuart_platform_data uart_pdata[] = {
- {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- },
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
};
static void __init mxt_td60_board_init(void)
@@ -254,10 +244,10 @@
mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
"MXT_TD60");
- mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
- mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
- mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
- mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info);
+ imx27_add_imx_uart0(&uart_pdata);
+ imx27_add_imx_uart1(&uart_pdata);
+ imx27_add_imx_uart2(&uart_pdata);
+ imx27_add_mxc_nand(&mxt_td60_nand_board_info);
i2c_register_board_info(0, mxt_td60_i2c_devices,
ARRAY_SIZE(mxt_td60_i2c_devices));
@@ -265,8 +255,8 @@
i2c_register_board_info(1, mxt_td60_i2c2_devices,
ARRAY_SIZE(mxt_td60_i2c2_devices));
- mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
- mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
+ imx27_add_i2c_imx0(&mxt_td60_i2c0_data);
+ imx27_add_i2c_imx1(&mxt_td60_i2c1_data);
mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
similarity index 94%
rename from arch/arm/mach-mx2/mach-pca100.c
rename to arch/arm/mach-imx/mach-pca100.c
index 2164b7f..6c92dea 100644
--- a/arch/arm/mach-mx2/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -36,12 +36,7 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
-#include <mach/i2c.h>
#include <asm/mach/time.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
-#include <mach/imx-uart.h>
#include <mach/audmux.h>
#include <mach/ssi.h>
#include <mach/mxc_nand.h>
@@ -51,6 +46,7 @@
#include <mach/ulpi.h>
#include <mach/imxfb.h>
+#include "devices-imx27.h"
#include "devices.h"
#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
@@ -166,11 +162,12 @@
GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct mxc_nand_platform_data pca100_nand_board_info = {
+static const struct mxc_nand_platform_data
+pca100_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
@@ -181,7 +178,7 @@
&mxc_wdt,
};
-static struct imxi2c_platform_data pca100_i2c_1_data = {
+static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
.bitrate = 100000,
};
@@ -224,7 +221,7 @@
static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1};
-static struct spi_imx_master pca100_spi_0_data = {
+static const struct spi_imx_master pca100_spi0_data __initconst = {
.chipselect = pca100_spi_cs,
.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
};
@@ -394,24 +391,24 @@
mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ imx27_add_imx_uart0(&uart_pdata);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
- mxc_register_device(&imx27_nand_device, &pca100_nand_board_info);
+ imx27_add_mxc_nand(&pca100_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, pca100_i2c_devices,
ARRAY_SIZE(pca100_i2c_devices));
- mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+ imx27_add_i2c_imx1(&pca100_i2c1_data);
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
spi_register_board_info(pca100_spi_board_info,
ARRAY_SIZE(pca100_spi_board_info));
- mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+ imx27_add_spi_imx0(&pca100_spi_0_data);
#endif
gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
diff --git a/arch/arm/mach-mx2/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
similarity index 90%
rename from arch/arm/mach-mx2/mach-pcm038.c
rename to arch/arm/mach-imx/mach-pcm038.c
index 36c8943..9212e8f 100644
--- a/arch/arm/mach-mx2/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -35,14 +35,12 @@
#include <mach/board-pcm038.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/i2c.h>
#include <mach/iomux-mx27.h>
-#include <mach/imx-uart.h>
#include <mach/mxc_nand.h>
-#include <mach/spi.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
+#include "devices-imx27.h"
#include "devices.h"
static int pcm038_pins[] = {
@@ -162,17 +160,12 @@
.resource = &pcm038_flash_resource,
};
-static struct imxuart_platform_data uart_pdata[] = {
- {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- }, {
- .flags = IMXUART_HAVE_RTSCTS,
- },
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
};
-static struct mxc_nand_platform_data pcm038_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm038_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
@@ -192,7 +185,7 @@
mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
}
-static struct imxi2c_platform_data pcm038_i2c_1_data = {
+static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
.bitrate = 100000,
};
@@ -215,7 +208,7 @@
static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
-static struct spi_imx_master pcm038_spi_0_data = {
+static const struct spi_imx_master pcm038_spi0_data __initconst = {
.chipselect = pcm038_spi_cs,
.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
};
@@ -305,18 +298,18 @@
pcm038_init_sram();
- mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
- mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
- mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+ imx27_add_imx_uart0(&uart_pdata);
+ imx27_add_imx_uart1(&uart_pdata);
+ imx27_add_imx_uart2(&uart_pdata);
mxc_gpio_mode(PE16_AF_OWIRE);
- mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info);
+ imx27_add_mxc_nand(&pcm038_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, pcm038_i2c_devices,
ARRAY_SIZE(pcm038_i2c_devices));
- mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
+ imx27_add_i2c_imx1(&pcm038_i2c1_data);
/* PE18 for user-LED D40 */
mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
@@ -326,7 +319,7 @@
/* MC13783 IRQ */
mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
- mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+ imx27_add_spi_imx0(&pcm038_spi0_data);
spi_register_board_info(pcm038_spi_board_info,
ARRAY_SIZE(pcm038_spi_board_info));
diff --git a/arch/arm/mach-mx1/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
similarity index 89%
rename from arch/arm/mach-mx1/mach-scb9328.c
rename to arch/arm/mach-imx/mach-scb9328.c
index 7587a7a..88bf0d1 100644
--- a/arch/arm/mach-mx1/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -22,17 +22,17 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx1.h>
+#include "devices-imx1.h"
#include "devices.h"
/*
* This scb9328 has a 32MiB flash
*/
static struct resource flash_resource = {
- .start = IMX_CS0_PHYS,
- .end = IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+ .start = MX1_CS0_PHYS,
+ .end = MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
.flags = IORESOURCE_MEM,
};
@@ -70,13 +70,13 @@
static struct resource dm9000x_resources[] = {
{
.name = "address area",
- .start = IMX_CS5_PHYS,
- .end = IMX_CS5_PHYS + 1,
+ .start = MX1_CS5_PHYS,
+ .end = MX1_CS5_PHYS + 1,
.flags = IORESOURCE_MEM, /* address access */
}, {
.name = "data area",
- .start = IMX_CS5_PHYS + 4,
- .end = IMX_CS5_PHYS + 5,
+ .start = MX1_CS5_PHYS + 4,
+ .end = MX1_CS5_PHYS + 5,
.flags = IORESOURCE_MEM, /* data access */
}, {
.start = IRQ_GPIOC(3),
@@ -108,14 +108,13 @@
ARRAY_SIZE(mxc_uart1_pins), "UART1");
}
-static int uart1_mxc_exit(struct platform_device *pdev)
+static void uart1_mxc_exit(struct platform_device *pdev)
{
mxc_gpio_release_multiple_pins(mxc_uart1_pins,
ARRAY_SIZE(mxc_uart1_pins));
- return 0;
}
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.init = uart1_mxc_init,
.exit = uart1_mxc_exit,
.flags = IMXUART_HAVE_RTSCTS,
@@ -131,7 +130,7 @@
*/
static void __init scb9328_init(void)
{
- mxc_register_device(&imx_uart1_device, &uart_pdata);
+ imx1_add_imx_uart0(&uart_pdata);
printk(KERN_INFO"Scb9328: Adding devices\n");
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-imx/mm-imx1.c
similarity index 67%
rename from arch/arm/mach-mx1/generic.c
rename to arch/arm/mach-imx/mm-imx1.c
index 7f9fc10..117ebf6 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -3,7 +3,7 @@
* Created: april 20th, 2004
* Copyright: Synertronixx GmbH
*
- * Common code for i.MX machines
+ * Common code for i.MX1 machines
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,11 +14,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
#include <linux/kernel.h>
#include <linux/init.h>
@@ -31,23 +26,25 @@
static struct map_desc imx_io_desc[] __initdata = {
{
- .virtual = IMX_IO_BASE,
- .pfn = __phys_to_pfn(IMX_IO_PHYS),
- .length = IMX_IO_SIZE,
- .type = MT_DEVICE
+ .virtual = MX1_IO_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX1_IO_BASE_ADDR),
+ .length = MX1_IO_SIZE,
+ .type = MT_DEVICE
}
};
void __init mx1_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX1);
- mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
+ mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
}
+int imx1_register_gpios(void);
+
void __init mx1_init_irq(void)
{
- mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+ imx1_register_gpios();
+ mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
}
-
diff --git a/arch/arm/mach-mx2/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
similarity index 95%
rename from arch/arm/mach-mx2/mm-imx21.c
rename to arch/arm/mach-imx/mm-imx21.c
index 6413431..68aa5d2 100644
--- a/arch/arm/mach-mx2/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-mx2/mm-imx21.c
+ * arch/arm/mach-imx/mm-imx21.c
*
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
@@ -77,7 +77,10 @@
iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
}
+int imx21_register_gpios(void);
+
void __init mx21_init_irq(void)
{
+ imx21_register_gpios();
mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
}
diff --git a/arch/arm/mach-mx2/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
similarity index 95%
rename from arch/arm/mach-mx2/mm-imx27.c
rename to arch/arm/mach-imx/mm-imx27.c
index 3366ed4..bcedce9 100644
--- a/arch/arm/mach-mx2/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-mx2/mm-imx27.c
+ * arch/arm/mach-imx/mm-imx27.c
*
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
@@ -77,7 +77,10 @@
iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
}
+int imx27_register_gpios(void);
+
void __init mx27_init_irq(void)
{
+ imx27_register_gpios();
mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
}
diff --git a/arch/arm/mach-mx1/ksym_mx1.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
similarity index 100%
rename from arch/arm/mach-mx1/ksym_mx1.c
rename to arch/arm/mach-imx/mx1-camera-fiq-ksym.c
diff --git a/arch/arm/mach-mx1/mx1_camera_fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S
similarity index 100%
rename from arch/arm/mach-mx1/mx1_camera_fiq.S
rename to arch/arm/mach-imx/mx1-camera-fiq.S
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
similarity index 100%
rename from arch/arm/mach-mx2/pcm970-baseboard.c
rename to arch/arm/mach-imx/pcm970-baseboard.c
diff --git a/arch/arm/mach-mx2/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
similarity index 100%
rename from arch/arm/mach-mx2/pm-imx27.c
rename to arch/arm/mach-imx/pm-imx27.c
diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig
deleted file mode 100644
index eb7660f..0000000
--- a/arch/arm/mach-mx1/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-if ARCH_MX1
-
-comment "MX1 platforms:"
-
-config MACH_MXLADS
- bool
-
-config ARCH_MX1ADS
- bool "MX1ADS platform"
- select MACH_MXLADS
- help
- Say Y here if you are using Motorola MX1ADS/MXLADS boards
-
-config MACH_SCB9328
- bool "Synertronixx scb9328"
- help
- Say Y here if you are using a Synertronixx scb9328 board
-
-endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
deleted file mode 100644
index fc2ddf8..0000000
--- a/arch/arm/mach-mx1/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
-obj-y += generic.o clock.o devices.o
-
-# Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o
-
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
diff --git a/arch/arm/mach-mx1/Makefile.boot b/arch/arm/mach-mx1/Makefile.boot
deleted file mode 100644
index 8ed1492..0000000
--- a/arch/arm/mach-mx1/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
- zreladdr-y := 0x08008000
-params_phys-y := 0x08000100
-initrd_phys-y := 0x08800000
-
diff --git a/arch/arm/mach-mx1/crm_regs.h b/arch/arm/mach-mx1/crm_regs.h
deleted file mode 100644
index 22e866f..0000000
--- a/arch/arm/mach-mx1/crm_regs.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This file may be distributed under the terms of the GNU General
- * Public License, version 2.
- */
-
-#ifndef __ARCH_ARM_MACH_MX1_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX1_CRM_REGS_H__
-
-#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
-#define SCM_BASE IO_ADDRESS(SCM_BASE_ADDR)
-
-/* CCM register addresses */
-#define CCM_CSCR (CCM_BASE + 0x0)
-#define CCM_MPCTL0 (CCM_BASE + 0x4)
-#define CCM_MPCTL1 (CCM_BASE + 0x8)
-#define CCM_SPCTL0 (CCM_BASE + 0xC)
-#define CCM_SPCTL1 (CCM_BASE + 0x10)
-#define CCM_PCDR (CCM_BASE + 0x20)
-
-#define CCM_CSCR_CLKO_OFFSET 29
-#define CCM_CSCR_CLKO_MASK (0x7 << 29)
-#define CCM_CSCR_USB_OFFSET 26
-#define CCM_CSCR_USB_MASK (0x7 << 26)
-#define CCM_CSCR_SPLL_RESTART (1 << 22)
-#define CCM_CSCR_MPLL_RESTART (1 << 21)
-#define CCM_CSCR_OSC_EN_SHIFT 17
-#define CCM_CSCR_SYSTEM_SEL (1 << 16)
-#define CCM_CSCR_BCLK_OFFSET 10
-#define CCM_CSCR_BCLK_MASK (0xF << 10)
-#define CCM_CSCR_PRESC (1 << 15)
-#define CCM_CSCR_SPEN (1 << 1)
-#define CCM_CSCR_MPEN (1 << 0)
-
-#define CCM_PCDR_PCLK3_OFFSET 16
-#define CCM_PCDR_PCLK3_MASK (0x7F << 16)
-#define CCM_PCDR_PCLK2_OFFSET 4
-#define CCM_PCDR_PCLK2_MASK (0xF << 4)
-#define CCM_PCDR_PCLK1_OFFSET 0
-#define CCM_PCDR_PCLK1_MASK 0xF
-
-/* SCM register addresses */
-#define SCM_SIDR (SCM_BASE + 0x0)
-#define SCM_FMCR (SCM_BASE + 0x4)
-#define SCM_GPCR (SCM_BASE + 0x8)
-#define SCM_GCCR (SCM_BASE + 0xC)
-
-#define SCM_GCCR_DMA_CLK_EN_OFFSET 3
-#define SCM_GCCR_CSI_CLK_EN_OFFSET 2
-#define SCM_GCCR_MMA_CLK_EN_OFFSET 1
-#define SCM_GCCR_USBD_CLK_EN_OFFSET 0
-
-#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
deleted file mode 100644
index b6be29d..0000000
--- a/arch/arm/mach-mx1/devices.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#include "devices.h"
-
-static struct resource imx_csi_resources[] = {
- {
- .start = 0x00224000,
- .end = 0x00224010,
- .flags = IORESOURCE_MEM,
- }, {
- .start = CSI_INT,
- .end = CSI_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 imx_csi_dmamask = 0xffffffffUL;
-
-struct platform_device imx_csi_device = {
- .name = "mx1-camera",
- .id = 0, /* This is used to put cameras on this interface */
- .dev = {
- .dma_mask = &imx_csi_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = imx_csi_resources,
- .num_resources = ARRAY_SIZE(imx_csi_resources),
-};
-
-static struct resource imx_i2c_resources[] = {
- {
- .start = 0x00217000,
- .end = 0x00217010,
- .flags = IORESOURCE_MEM,
- }, {
- .start = I2C_INT,
- .end = I2C_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device imx_i2c_device = {
- .name = "imx-i2c",
- .id = 0,
- .resource = imx_i2c_resources,
- .num_resources = ARRAY_SIZE(imx_i2c_resources),
-};
-
-static struct resource imx_uart1_resources[] = {
- {
- .start = UART1_BASE_ADDR,
- .end = UART1_BASE_ADDR + 0xD0,
- .flags = IORESOURCE_MEM,
- }, {
- .start = UART1_MINT_RX,
- .end = UART1_MINT_RX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = UART1_MINT_TX,
- .end = UART1_MINT_TX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = UART1_MINT_RTS,
- .end = UART1_MINT_RTS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device imx_uart1_device = {
- .name = "imx-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(imx_uart1_resources),
- .resource = imx_uart1_resources,
-};
-
-static struct resource imx_uart2_resources[] = {
- {
- .start = UART2_BASE_ADDR,
- .end = UART2_BASE_ADDR + 0xD0,
- .flags = IORESOURCE_MEM,
- }, {
- .start = UART2_MINT_RX,
- .end = UART2_MINT_RX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = UART2_MINT_TX,
- .end = UART2_MINT_TX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = UART2_MINT_RTS,
- .end = UART2_MINT_RTS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device imx_uart2_device = {
- .name = "imx-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(imx_uart2_resources),
- .resource = imx_uart2_resources,
-};
-
-static struct resource imx_rtc_resources[] = {
- {
- .start = 0x00204000,
- .end = 0x00204024,
- .flags = IORESOURCE_MEM,
- }, {
- .start = RTC_INT,
- .end = RTC_INT,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = RTC_SAMINT,
- .end = RTC_SAMINT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device imx_rtc_device = {
- .name = "rtc-imx",
- .id = 0,
- .resource = imx_rtc_resources,
- .num_resources = ARRAY_SIZE(imx_rtc_resources),
-};
-
-static struct resource imx_wdt_resources[] = {
- {
- .start = 0x00201000,
- .end = 0x00201008,
- .flags = IORESOURCE_MEM,
- }, {
- .start = WDT_INT,
- .end = WDT_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device imx_wdt_device = {
- .name = "imx-wdt",
- .id = 0,
- .resource = imx_wdt_resources,
- .num_resources = ARRAY_SIZE(imx_wdt_resources),
-};
-
-static struct resource imx_usb_resources[] = {
- {
- .start = 0x00212000,
- .end = 0x00212148,
- .flags = IORESOURCE_MEM,
- }, {
- .start = USBD_INT0,
- .end = USBD_INT0,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = USBD_INT1,
- .end = USBD_INT1,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = USBD_INT2,
- .end = USBD_INT2,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = USBD_INT3,
- .end = USBD_INT3,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = USBD_INT4,
- .end = USBD_INT4,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = USBD_INT5,
- .end = USBD_INT5,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = USBD_INT6,
- .end = USBD_INT6,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device imx_usb_device = {
- .name = "imx_udc",
- .id = 0,
- .num_resources = ARRAY_SIZE(imx_usb_resources),
- .resource = imx_usb_resources,
-};
-
-/* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
- {
- .chip.label = "gpio-0",
- .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
- .irq = GPIO_INT_PORTA,
- .virtual_irq_start = MXC_GPIO_IRQ_START,
- }, {
- .chip.label = "gpio-1",
- .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
- .irq = GPIO_INT_PORTB,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
- }, {
- .chip.label = "gpio-2",
- .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
- .irq = GPIO_INT_PORTC,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
- }, {
- .chip.label = "gpio-3",
- .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
- .irq = GPIO_INT_PORTD,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
- }
-};
-
-int __init mxc_register_gpios(void)
-{
- return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
diff --git a/arch/arm/mach-mx1/devices.h b/arch/arm/mach-mx1/devices.h
deleted file mode 100644
index 0da5d7c..0000000
--- a/arch/arm/mach-mx1/devices.h
+++ /dev/null
@@ -1,7 +0,0 @@
-extern struct platform_device imx_csi_device;
-extern struct platform_device imx_i2c_device;
-extern struct platform_device imx_uart1_device;
-extern struct platform_device imx_uart2_device;
-extern struct platform_device imx_rtc_device;
-extern struct platform_device imx_wdt_device;
-extern struct platform_device imx_usb_device;
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
deleted file mode 100644
index 27d496c..0000000
--- a/arch/arm/mach-mx2/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := devices.o serial.o
-
-obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o
-
-obj-$(CONFIG_MACH_MX27) += cpu_imx27.o pm-imx27.o
-obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o
-
-obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
-obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
-obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
-obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
-obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
-obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
-obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
deleted file mode 100644
index aefc87a..0000000
--- a/arch/arm/mach-mx2/devices.h
+++ /dev/null
@@ -1,44 +0,0 @@
-extern struct platform_device mxc_gpt1;
-extern struct platform_device mxc_gpt2;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_gpt3;
-extern struct platform_device mxc_gpt4;
-extern struct platform_device mxc_gpt5;
-#endif
-extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
-extern struct platform_device mxc_uart_device5;
-extern struct platform_device mxc_w1_master_device;
-#ifdef CONFIG_MACH_MX21
-extern struct platform_device imx21_nand_device;
-#endif
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device imx27_nand_device;
-#endif
-extern struct platform_device mxc_fb_device;
-extern struct platform_device mxc_fec_device;
-extern struct platform_device mxc_pwm_device;
-extern struct platform_device mxc_i2c_device0;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_i2c_device1;
-#endif
-extern struct platform_device mxc_sdhc_device0;
-extern struct platform_device mxc_sdhc_device1;
-extern struct platform_device mxc_otg_udc_device;
-extern struct platform_device mx27_camera_device;
-extern struct platform_device mxc_otg_host;
-extern struct platform_device mxc_usbh1;
-extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_spi_device2;
-#endif
-extern struct platform_device mx21_usbhc_device;
-extern struct platform_device imx_ssi_device0;
-extern struct platform_device imx_ssi_device1;
-extern struct platform_device imx_kpp_device;
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
deleted file mode 100644
index 1c0c835..0000000
--- a/arch/arm/mach-mx2/serial.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <mach/hardware.h>
-#include <mach/imx-uart.h>
-#include "devices.h"
-
-static struct resource uart0[] = {
- {
- .start = MX2x_UART1_BASE_ADDR,
- .end = MX2x_UART1_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX2x_INT_UART1,
- .end = MX2x_INT_UART1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device0 = {
- .name = "imx-uart",
- .id = 0,
- .resource = uart0,
- .num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
- {
- .start = MX2x_UART2_BASE_ADDR,
- .end = MX2x_UART2_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX2x_INT_UART2,
- .end = MX2x_INT_UART2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device1 = {
- .name = "imx-uart",
- .id = 1,
- .resource = uart1,
- .num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
- {
- .start = MX2x_UART3_BASE_ADDR,
- .end = MX2x_UART3_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX2x_INT_UART3,
- .end = MX2x_INT_UART3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device2 = {
- .name = "imx-uart",
- .id = 2,
- .resource = uart2,
- .num_resources = ARRAY_SIZE(uart2),
-};
-
-static struct resource uart3[] = {
- {
- .start = MX2x_UART4_BASE_ADDR,
- .end = MX2x_UART4_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX2x_INT_UART4,
- .end = MX2x_INT_UART4,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device3 = {
- .name = "imx-uart",
- .id = 3,
- .resource = uart3,
- .num_resources = ARRAY_SIZE(uart3),
-};
-
-#ifdef CONFIG_MACH_MX27
-static struct resource uart4[] = {
- {
- .start = MX27_UART5_BASE_ADDR,
- .end = MX27_UART5_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX27_INT_UART5,
- .end = MX27_INT_UART5,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device4 = {
- .name = "imx-uart",
- .id = 4,
- .resource = uart4,
- .num_resources = ARRAY_SIZE(uart4),
-};
-
-static struct resource uart5[] = {
- {
- .start = MX27_UART6_BASE_ADDR,
- .end = MX27_UART6_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX27_INT_UART6,
- .end = MX27_INT_UART6,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device5 = {
- .name = "imx-uart",
- .id = 5,
- .resource = uart5,
- .num_resources = ARRAY_SIZE(uart5),
-};
-#endif
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index 3a6668e..67e0b54 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -4,9 +4,14 @@
config MACH_MX25_3DS
bool "Support MX25PDK (3DS) Platform"
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
config MACH_EUKREA_CPUIMX25
bool "Support Eukrea CPUIMX25 Platform"
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
select MXC_ULPI if USB_ULPI
choice
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index 83ab5d8..87ffb9c 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,5 +1,5 @@
obj-y := mm.o devices.o
obj-$(CONFIG_ARCH_MX25) += clock.o
-obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25pdk.o
+obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-cpuimx25.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD) += eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h
new file mode 100644
index 0000000..2025cb9
--- /dev/null
+++ b/arch/arm/mach-mx25/devices-imx25.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx25.h>
+#include <mach/devices-common.h>
+
+#define imx25_add_imx_i2c0(pdata) \
+ imx_add_imx_i2c(0, MX25_I2C1_BASE_ADDR, SZ_16K, MX25_INT_I2C1, pdata)
+#define imx25_add_imx_i2c1(pdata) \
+ imx_add_imx_i2c(1, MX25_I2C2_BASE_ADDR, SZ_16K, MX25_INT_I2C2, pdata)
+#define imx25_add_imx_i2c2(pdata) \
+ imx_add_imx_i2c(2, MX25_I2C3_BASE_ADDR, SZ_16K, MX25_INT_I2C3, pdata)
+
+#define imx25_add_imx_uart0(pdata) \
+ imx_add_imx_uart_1irq(0, MX25_UART1_BASE_ADDR, SZ_16K, MX25_INT_UART1, pdata)
+#define imx25_add_imx_uart1(pdata) \
+ imx_add_imx_uart_1irq(1, MX25_UART2_BASE_ADDR, SZ_16K, MX25_INT_UART2, pdata)
+#define imx25_add_imx_uart2(pdata) \
+ imx_add_imx_uart_1irq(2, MX25_UART3_BASE_ADDR, SZ_16K, MX25_INT_UART3, pdata)
+#define imx25_add_imx_uart3(pdata) \
+ imx_add_imx_uart_1irq(3, MX25_UART4_BASE_ADDR, SZ_16K, MX25_INT_UART4, pdata)
+#define imx25_add_imx_uart4(pdata) \
+ imx_add_imx_uart_1irq(4, MX25_UART5_BASE_ADDR, SZ_16K, MX25_INT_UART5, pdata)
+
+#define imx25_add_mxc_nand(pdata) \
+ imx_add_mxc_nand_v21(MX25_NFC_BASE_ADDR, MX25_INT_NANDFC, pdata)
+
+#define imx25_add_spi_imx0(pdata) \
+ imx_add_spi_imx(0, MX25_CSPI1_BASE_ADDR, SZ_16K, MX25_INT_CSPI1, pdata)
+#define imx25_add_spi_imx1(pdata) \
+ imx_add_spi_imx(1, MX25_CSPI2_BASE_ADDR, SZ_16K, MX25_INT_CSPI2, pdata)
+#define imx25_add_spi_imx2(pdata) \
+ imx_add_spi_imx(2, MX25_CSPI3_BASE_ADDR, SZ_16K, MX25_INT_CSPI3, pdata)
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 82d3e53..3468eb1 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -22,101 +22,6 @@
#include <mach/mx25.h>
#include <mach/irqs.h>
-static struct resource uart0[] = {
- {
- .start = 0x43f90000,
- .end = 0x43f93fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 45,
- .end = 45,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device0 = {
- .name = "imx-uart",
- .id = 0,
- .resource = uart0,
- .num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
- {
- .start = 0x43f94000,
- .end = 0x43f97fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 32,
- .end = 32,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device1 = {
- .name = "imx-uart",
- .id = 1,
- .resource = uart1,
- .num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
- {
- .start = 0x5000c000,
- .end = 0x5000ffff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 18,
- .end = 18,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device2 = {
- .name = "imx-uart",
- .id = 2,
- .resource = uart2,
- .num_resources = ARRAY_SIZE(uart2),
-};
-
-static struct resource uart3[] = {
- {
- .start = 0x50008000,
- .end = 0x5000bfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 5,
- .end = 5,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device3 = {
- .name = "imx-uart",
- .id = 3,
- .resource = uart3,
- .num_resources = ARRAY_SIZE(uart3),
-};
-
-static struct resource uart4[] = {
- {
- .start = 0x5002c000,
- .end = 0x5002ffff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 40,
- .end = 40,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device4 = {
- .name = "imx-uart",
- .id = 4,
- .resource = uart4,
- .num_resources = ARRAY_SIZE(uart4),
-};
-
static u64 otg_dmamask = DMA_BIT_MASK(32);
static struct resource mxc_otg_resources[] = {
@@ -179,63 +84,6 @@
.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
};
-static struct resource mxc_spi_resources0[] = {
- {
- .start = 0x43fa4000,
- .end = 0x43fa7fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 14,
- .end = 14,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_spi_device0 = {
- .name = "spi_imx",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_spi_resources0),
- .resource = mxc_spi_resources0,
-};
-
-static struct resource mxc_spi_resources1[] = {
- {
- .start = 0x50010000,
- .end = 0x50013fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 13,
- .end = 13,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_spi_device1 = {
- .name = "spi_imx",
- .id = 1,
- .num_resources = ARRAY_SIZE(mxc_spi_resources1),
- .resource = mxc_spi_resources1,
-};
-
-static struct resource mxc_spi_resources2[] = {
- {
- .start = 0x50004000,
- .end = 0x50007fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_spi_device2 = {
- .name = "spi_imx",
- .id = 2,
- .num_resources = ARRAY_SIZE(mxc_spi_resources2),
- .resource = mxc_spi_resources2,
-};
-
static struct resource mxc_pwm_resources0[] = {
{
.start = 0x53fe0000,
@@ -331,63 +179,6 @@
.resource = mxc_pwm_resources3,
};
-static struct resource mxc_i2c_1_resources[] = {
- {
- .start = 0x43f80000,
- .end = 0x43f83fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 3,
- .end = 3,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device mxc_i2c_device0 = {
- .name = "imx-i2c",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
- .resource = mxc_i2c_1_resources,
-};
-
-static struct resource mxc_i2c_2_resources[] = {
- {
- .start = 0x43f98000,
- .end = 0x43f9bfff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 4,
- .end = 4,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device mxc_i2c_device1 = {
- .name = "imx-i2c",
- .id = 1,
- .num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
- .resource = mxc_i2c_2_resources,
-};
-
-static struct resource mxc_i2c_3_resources[] = {
- {
- .start = 0x43f84000,
- .end = 0x43f87fff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 10,
- .end = 10,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-struct platform_device mxc_i2c_device2 = {
- .name = "imx-i2c",
- .id = 2,
- .num_resources = ARRAY_SIZE(mxc_i2c_3_resources),
- .resource = mxc_i2c_3_resources,
-};
-
static struct mxc_gpio_port imx_gpio_ports[] = {
{
.chip.label = "gpio-0",
@@ -412,7 +203,7 @@
}
};
-int __init mxc_register_gpios(void)
+int __init imx25_register_gpios(void)
{
return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
}
@@ -437,26 +228,6 @@
.resource = mx25_fec_resources,
};
-static struct resource mxc_nand_resources[] = {
- {
- .start = MX25_NFC_BASE_ADDR,
- .end = MX25_NFC_BASE_ADDR + 0x1fff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX25_INT_NANDFC,
- .end = MX25_INT_NANDFC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_nand_device = {
- .name = "mxc_nand",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_nand_resources),
- .resource = mxc_nand_resources,
-};
-
static struct resource mx25_rtc_resources[] = {
{
.start = MX25_DRYICE_BASE_ADDR,
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index 00e29f5..4aceb68 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -1,24 +1,12 @@
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
extern struct platform_device mxc_otg;
extern struct platform_device otg_udc_device;
extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-extern struct platform_device mxc_spi_device2;
extern struct platform_device mxc_pwm_device0;
extern struct platform_device mxc_pwm_device1;
extern struct platform_device mxc_pwm_device2;
extern struct platform_device mxc_pwm_device3;
extern struct platform_device mxc_keypad_device;
-extern struct platform_device mxc_i2c_device0;
-extern struct platform_device mxc_i2c_device1;
-extern struct platform_device mxc_i2c_device2;
extern struct platform_device mx25_fec_device;
-extern struct platform_device mxc_nand_device;
extern struct platform_device mx25_rtc_device;
extern struct platform_device mx25_fb_device;
extern struct platform_device mxc_wdt;
diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
index e0f0dfd..f07b1f9 100644
--- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
@@ -38,6 +38,7 @@
#include <mach/ssi.h>
#include <mach/audmux.h>
+#include "devices-imx25.h"
#include "devices.h"
static struct pad_desc eukrea_mbimxsd_pads[] = {
@@ -195,7 +196,7 @@
&eukrea_mbimxsd_lcd_powerdev,
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -237,7 +238,7 @@
);
#endif
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ imx25_add_imx_uart1(&uart_pdata);
mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata);
mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata);
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
index 4796484..d39f9cc 100644
--- a/arch/arm/mach-mx25/mach-cpuimx25.c
+++ b/arch/arm/mach-mx25/mach-cpuimx25.c
@@ -37,18 +37,17 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/i2c.h>
#include <mach/mx25.h>
#include <mach/mxc_nand.h>
#include <mach/imxfb.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
-
-#include "devices.h"
#include <mach/iomux-mx25.h>
-static struct imxuart_platform_data uart_pdata = {
+#include "devices-imx25.h"
+#include "devices.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -72,13 +71,15 @@
.phy = PHY_INTERFACE_MODE_RMII,
};
-static struct mxc_nand_platform_data eukrea_cpuimx25_nand_board_info = {
+static const struct mxc_nand_platform_data
+eukrea_cpuimx25_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
};
-static struct imxi2c_platform_data eukrea_cpuimx25_i2c_1_data = {
+static const struct imxi2c_platform_data
+eukrea_cpuimx25_i2c0_data __initconst = {
.bitrate = 100000,
};
@@ -125,14 +126,14 @@
ARRAY_SIZE(eukrea_cpuimx25_pads)))
printk(KERN_ERR "error setting cpuimx25 pads !\n");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_nand_device, &eukrea_cpuimx25_nand_board_info);
+ imx25_add_imx_uart0(&uart_pdata);
+ imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
mxc_register_device(&mx25_rtc_device, NULL);
mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
- mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx25_i2c_1_data);
+ imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
diff --git a/arch/arm/mach-mx25/mach-mx25pdk.c b/arch/arm/mach-mx25/mach-mx25_3ds.c
similarity index 92%
rename from arch/arm/mach-mx25/mach-mx25pdk.c
rename to arch/arm/mach-mx25/mach-mx25_3ds.c
index ba3fbef1..62bc21f 100644
--- a/arch/arm/mach-mx25/mach-mx25pdk.c
+++ b/arch/arm/mach-mx25/mach-mx25_3ds.c
@@ -16,6 +16,12 @@
* Boston, MA 02110-1301, USA.
*/
+/*
+ * This machine is known as:
+ * - i.MX25 3-Stack Development System
+ * - i.MX25 Platform Development Kit (i.MX25 PDK)
+ */
+
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -33,14 +39,14 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
#include <mach/mx25.h>
-#include <mach/mxc_nand.h>
#include <mach/imxfb.h>
-#include "devices.h"
#include <mach/iomux-mx25.h>
-static struct imxuart_platform_data uart_pdata = {
+#include "devices-imx25.h"
+#include "devices.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -114,7 +120,8 @@
gpio_set_value(FEC_RESET_B_GPIO, 1);
}
-static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx25pdk_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
@@ -177,9 +184,9 @@
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
ARRAY_SIZE(mx25pdk_pads));
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ imx25_add_imx_uart0(&uart_pdata);
mxc_register_device(&mxc_usbh2, NULL);
- mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);
+ imx25_add_mxc_nand(&mx25pdk_nand_board_info);
mxc_register_device(&mx25_rtc_device, NULL);
mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
mxc_register_device(&mxc_wdt, NULL);
diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c
index a7e587f..593e145 100644
--- a/arch/arm/mach-mx25/mm.c
+++ b/arch/arm/mach-mx25/mm.c
@@ -14,10 +14,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/mm.h>
@@ -69,8 +65,11 @@
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+int imx25_register_gpios(void);
+
void __init mx25_init_irq(void)
{
+ imx25_register_gpios();
mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
}
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index b09e9a9..a11112a 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -15,6 +15,8 @@
config MACH_MX31ADS
bool "Support MX31ADS platforms"
select ARCH_MX31
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
default y
help
Include support for MX31ADS platform. This includes specific
@@ -34,6 +36,9 @@
config MACH_PCM037
bool "Support Phytec pcm037 (i.MX31) platforms"
select ARCH_MX31
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm037 platform. This includes
@@ -42,6 +47,7 @@
config MACH_PCM037_EET
bool "Support pcm037 EET board extensions"
depends on MACH_PCM037
+ select IMX_HAVE_PLATFORM_SPI_IMX
help
Add support for PCM037 EET baseboard extensions. If you are using the
OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
@@ -51,6 +57,9 @@
bool "Support MX31 LITEKIT (LogicPD)"
select ARCH_MX31
select MXC_ULPI if USB_ULPI
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
@@ -58,6 +67,9 @@
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
select ARCH_MX31
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
@@ -74,6 +86,9 @@
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select ARCH_MX31
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
Include support for mx31moboard platform. This includes specific
@@ -82,6 +97,8 @@
config MACH_MX31LILLY
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
select ARCH_MX31
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
help
Include support for mx31 based LILLY1131 modules. This includes
@@ -90,6 +107,7 @@
config MACH_QONG
bool "Support Dave/DENX QongEVB-LITE platform"
select ARCH_MX31
+ select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
@@ -97,6 +115,9 @@
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
select ARCH_MX35
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm043 platform. This includes
@@ -105,6 +126,9 @@
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
select ARCH_MX31
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_NAND
select MXC_ULPI if USB_ULPI
help
Include support for Atmark Armadillo-500 platform. This includes
@@ -113,6 +137,7 @@
config MACH_MX35_3DS
bool "Support MX35PDK platform"
select ARCH_MX35
+ select IMX_HAVE_PLATFORM_IMX_UART
default n
help
Include support for MX35PDK platform. This includes specific
@@ -121,6 +146,7 @@
config MACH_KZM_ARM11_01
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
select ARCH_MX31
+ select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for KZM-ARM11-01. This includes specific
configurations for the board and its peripherals.
@@ -128,6 +154,9 @@
config MACH_EUKREA_CPUIMX35
bool "Support Eukrea CPUIMX35 Platform"
select ARCH_MX35
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_MXC_NAND
select MXC_ULPI if USB_ULPI
help
Include support for Eukrea CPUIMX35 platform. This includes
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index ef68ff5..54bc935 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -22,7 +22,7 @@
obj-$(CONFIG_MACH_QONG) += mach-qong.o
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35pdk.o
+obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD) += eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
new file mode 100644
index 0000000..3b1a44a
--- /dev/null
+++ b/arch/arm/mach-mx3/devices-imx31.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx31.h>
+#include <mach/devices-common.h>
+
+#define imx31_add_imx_i2c0(pdata) \
+ imx_add_imx_i2c(0, MX31_I2C1_BASE_ADDR, SZ_4K, MX31_INT_I2C1, pdata)
+#define imx31_add_imx_i2c1(pdata) \
+ imx_add_imx_i2c(1, MX31_I2C2_BASE_ADDR, SZ_4K, MX31_INT_I2C2, pdata)
+#define imx31_add_imx_i2c2(pdata) \
+ imx_add_imx_i2c(2, MX31_I2C3_BASE_ADDR, SZ_4K, MX31_INT_I2C3, pdata)
+
+#define imx31_add_imx_uart0(pdata) \
+ imx_add_imx_uart_1irq(0, MX31_UART1_BASE_ADDR, SZ_16K, MX31_INT_UART1, pdata)
+#define imx31_add_imx_uart1(pdata) \
+ imx_add_imx_uart_1irq(1, MX31_UART2_BASE_ADDR, SZ_16K, MX31_INT_UART2, pdata)
+#define imx31_add_imx_uart2(pdata) \
+ imx_add_imx_uart_1irq(2, MX31_UART3_BASE_ADDR, SZ_16K, MX31_INT_UART3, pdata)
+#define imx31_add_imx_uart3(pdata) \
+ imx_add_imx_uart_1irq(3, MX31_UART4_BASE_ADDR, SZ_16K, MX31_INT_UART4, pdata)
+#define imx31_add_imx_uart4(pdata) \
+ imx_add_imx_uart_1irq(4, MX31_UART5_BASE_ADDR, SZ_16K, MX31_INT_UART5, pdata)
+
+#define imx31_add_mxc_nand(pdata) \
+ imx_add_mxc_nand_v1(MX31_NFC_BASE_ADDR, MX31_INT_NANDFC, pdata)
+
+#define imx31_add_spi_imx0(pdata) \
+ imx_add_spi_imx(0, MX31_CSPI1_BASE_ADDR, SZ_4K, MX31_INT_CSPI1, pdata)
+#define imx31_add_spi_imx1(pdata) \
+ imx_add_spi_imx(1, MX31_CSPI2_BASE_ADDR, SZ_4K, MX31_INT_CSPI2, pdata)
+#define imx31_add_spi_imx2(pdata) \
+ imx_add_spi_imx(2, MX31_CSPI3_BASE_ADDR, SZ_4K, MX31_INT_CSPI3, pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
new file mode 100644
index 0000000..536d9b9
--- /dev/null
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx35.h>
+#include <mach/devices-common.h>
+
+#define imx35_add_imx_i2c0(pdata) \
+ imx_add_imx_i2c(0, MX35_I2C1_BASE_ADDR, SZ_4K, MX35_INT_I2C1, pdata)
+#define imx35_add_imx_i2c1(pdata) \
+ imx_add_imx_i2c(1, MX35_I2C2_BASE_ADDR, SZ_4K, MX35_INT_I2C2, pdata)
+#define imx35_add_imx_i2c2(pdata) \
+ imx_add_imx_i2c(2, MX35_I2C3_BASE_ADDR, SZ_4K, MX35_INT_I2C3, pdata)
+
+#define imx35_add_imx_uart0(pdata) \
+ imx_add_imx_uart_1irq(0, MX35_UART1_BASE_ADDR, SZ_16K, MX35_INT_UART1, pdata)
+#define imx35_add_imx_uart1(pdata) \
+ imx_add_imx_uart_1irq(1, MX35_UART2_BASE_ADDR, SZ_16K, MX35_INT_UART2, pdata)
+#define imx35_add_imx_uart2(pdata) \
+ imx_add_imx_uart_1irq(2, MX35_UART3_BASE_ADDR, SZ_16K, MX35_INT_UART3, pdata)
+
+#define imx35_add_mxc_nand(pdata) \
+ imx_add_mxc_nand_v21(MX35_NFC_BASE_ADDR, MX35_INT_NANDFC, pdata)
+
+#define imx35_add_spi_imx0(pdata) \
+ imx_add_spi_imx(0, MX35_CSPI1_BASE_ADDR, SZ_4K, MX35_INT_CSPI1, pdata)
+#define imx35_add_spi_imx1(pdata) \
+ imx_add_spi_imx(1, MX35_CSPI2_BASE_ADDR, SZ_4K, MX35_INT_CSPI2, pdata)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index db7acd6..a4fd1a2 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -25,108 +25,10 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
#include <mach/mx3_camera.h>
#include "devices.h"
-static struct resource uart0[] = {
- {
- .start = UART1_BASE_ADDR,
- .end = UART1_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_UART1,
- .end = MXC_INT_UART1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device0 = {
- .name = "imx-uart",
- .id = 0,
- .resource = uart0,
- .num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
- {
- .start = UART2_BASE_ADDR,
- .end = UART2_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_UART2,
- .end = MXC_INT_UART2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device1 = {
- .name = "imx-uart",
- .id = 1,
- .resource = uart1,
- .num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
- {
- .start = UART3_BASE_ADDR,
- .end = UART3_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_UART3,
- .end = MXC_INT_UART3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device2 = {
- .name = "imx-uart",
- .id = 2,
- .resource = uart2,
- .num_resources = ARRAY_SIZE(uart2),
-};
-
-#ifdef CONFIG_ARCH_MX31
-static struct resource uart3[] = {
- {
- .start = UART4_BASE_ADDR,
- .end = UART4_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_UART4,
- .end = MXC_INT_UART4,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device3 = {
- .name = "imx-uart",
- .id = 3,
- .resource = uart3,
- .num_resources = ARRAY_SIZE(uart3),
-};
-
-static struct resource uart4[] = {
- {
- .start = UART5_BASE_ADDR,
- .end = UART5_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_UART5,
- .end = MXC_INT_UART5,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device4 = {
- .name = "imx-uart",
- .id = 4,
- .resource = uart4,
- .num_resources = ARRAY_SIZE(uart4),
-};
-#endif /* CONFIG_ARCH_MX31 */
-
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
{
@@ -147,7 +49,7 @@
}
};
-int __init mxc_register_gpios(void)
+int __init imx3x_register_gpios(void)
{
return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
}
@@ -167,82 +69,6 @@
.resource = mxc_w1_master_resources,
};
-static struct resource mxc_nand_resources[] = {
- {
- .start = 0, /* runtime dependent */
- .end = 0,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_NANDFC,
- .end = MXC_INT_NANDFC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_nand_device = {
- .name = "mxc_nand",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_nand_resources),
- .resource = mxc_nand_resources,
-};
-
-static struct resource mxc_i2c0_resources[] = {
- {
- .start = I2C_BASE_ADDR,
- .end = I2C_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_I2C,
- .end = MXC_INT_I2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_i2c_device0 = {
- .name = "imx-i2c",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_i2c0_resources),
- .resource = mxc_i2c0_resources,
-};
-
-static struct resource mxc_i2c1_resources[] = {
- {
- .start = I2C2_BASE_ADDR,
- .end = I2C2_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_I2C2,
- .end = MXC_INT_I2C2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_i2c_device1 = {
- .name = "imx-i2c",
- .id = 1,
- .num_resources = ARRAY_SIZE(mxc_i2c1_resources),
- .resource = mxc_i2c1_resources,
-};
-
-static struct resource mxc_i2c2_resources[] = {
- {
- .start = I2C3_BASE_ADDR,
- .end = I2C3_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_I2C3,
- .end = MXC_INT_I2C3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_i2c_device2 = {
- .name = "imx-i2c",
- .id = 2,
- .num_resources = ARRAY_SIZE(mxc_i2c2_resources),
- .resource = mxc_i2c2_resources,
-};
-
#ifdef CONFIG_ARCH_MX31
static struct resource mxcsdhc0_resources[] = {
{
@@ -455,68 +281,7 @@
.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
};
-/*
- * SPI master controller
- * 3 channels
- */
-static struct resource mxc_spi_0_resources[] = {
- {
- .start = CSPI1_BASE_ADDR,
- .end = CSPI1_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_CSPI1,
- .end = MXC_INT_CSPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource mxc_spi_1_resources[] = {
- {
- .start = CSPI2_BASE_ADDR,
- .end = CSPI2_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_CSPI2,
- .end = MXC_INT_CSPI2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource mxc_spi_2_resources[] = {
- {
- .start = CSPI3_BASE_ADDR,
- .end = CSPI3_BASE_ADDR + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC_INT_CSPI3,
- .end = MXC_INT_CSPI3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_spi_device0 = {
- .name = "spi_imx",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_spi_0_resources),
- .resource = mxc_spi_0_resources,
-};
-
-struct platform_device mxc_spi_device1 = {
- .name = "spi_imx",
- .id = 1,
- .num_resources = ARRAY_SIZE(mxc_spi_1_resources),
- .resource = mxc_spi_1_resources,
-};
-
-struct platform_device mxc_spi_device2 = {
- .name = "spi_imx",
- .id = 2,
- .num_resources = ARRAY_SIZE(mxc_spi_2_resources),
- .resource = mxc_spi_2_resources,
-};
-
-#ifdef CONFIG_ARCH_MX35
+#if defined(CONFIG_ARCH_MX35)
static struct resource mxc_fec_resources[] = {
{
.start = MXC_FEC_BASE_ADDR,
@@ -628,16 +393,15 @@
static int __init mx3_devices_init(void)
{
+#if defined(CONFIG_ARCH_MX31)
if (cpu_is_mx31()) {
- mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
- mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
mxc_register_device(&mxc_rnga_device, NULL);
}
+#endif
+#if defined(CONFIG_ARCH_MX35)
if (cpu_is_mx35()) {
- mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
- mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff;
otg_resources[0].start = MX35_OTG_BASE_ADDR;
otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
otg_resources[1].start = MXC_INT_USBOTG;
@@ -653,6 +417,7 @@
imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
}
+#endif
return 0;
}
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 2c3c864..e553523 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -1,14 +1,4 @@
-
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_nand_device;
-extern struct platform_device mxc_i2c_device0;
-extern struct platform_device mxc_i2c_device1;
-extern struct platform_device mxc_i2c_device2;
extern struct platform_device mx3_ipu;
extern struct platform_device mx3_fb;
extern struct platform_device mx3_camera;
@@ -20,9 +10,6 @@
extern struct platform_device mxc_usbh1;
extern struct platform_device mxc_usbh2;
extern struct platform_device mxc_rnga_device;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-extern struct platform_device mxc_spi_device2;
extern struct platform_device imx_ssi_device0;
extern struct platform_device imx_ssi_device1;
extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 6785978..368a603 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -46,6 +46,7 @@
#include <mach/audmux.h>
#include <mach/ssi.h>
+#include "devices-imx35.h"
#include "devices.h"
static const struct fb_videomode fb_modedb[] = {
@@ -196,7 +197,7 @@
&eukrea_mbimxsd_lcd_powerdev,
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -238,7 +239,7 @@
);
#endif
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ imx35_add_imx_uart1(&uart_pdata);
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 5f72ec9..96aadca 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -48,16 +48,14 @@
#include <asm/mach/map.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
-#include <mach/board-armadillo5x0.h>
#include <mach/mmc.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
+#include "devices-imx31.h"
#include "devices.h"
#include "crm_regs.h"
@@ -301,7 +299,8 @@
/*
* NAND Flash
*/
-static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+static const struct mxc_nand_platform_data
+armadillo5x0_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
@@ -493,13 +492,12 @@
};
/* UART device data */
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static struct platform_device *devices[] __initdata = {
&armadillo5x0_smc911x_device,
- &mxc_i2c_device1,
&armadillo5x0_button_device,
};
@@ -512,10 +510,11 @@
ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
platform_add_devices(devices, ARRAY_SIZE(devices));
+ imx31_add_imx_i2c1(NULL);
/* Register UART */
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ imx31_add_imx_uart0(&uart_pdata);
+ imx31_add_imx_uart1(&uart_pdata);
/* SMSC9118 IRQ pin */
gpio_direction_input(MX31_PIN_GPIO1_0);
@@ -532,7 +531,7 @@
&armadillo5x0_nor_flash_pdata);
/* Register NAND Flash */
- mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+ imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
/* set NAND page size to 2k if not configured via boot mode pins */
__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 55caa5c..4f6146d 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -40,20 +40,20 @@
#include <mach/board-eukrea_cpuimx35.h>
#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/i2c.h>
#include <mach/iomux-mx35.h>
#include <mach/mxc_nand.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
+#include "devices-imx35.h"
#include "devices.h"
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct imxi2c_platform_data eukrea_cpuimx35_i2c_1_data = {
+static const struct imxi2c_platform_data
+eukrea_cpuimx35_i2c0_data __initconst = {
.bitrate = 50000,
};
@@ -134,7 +134,8 @@
MX35_PAD_ATA_DA2__GPIO3_2,
};
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+eukrea_cpuimx35_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
@@ -181,12 +182,12 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+ imx35_add_imx_uart0(&uart_pdata);
+ imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
- mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx35_i2c_1_data);
+ imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index f085d5d..5b23e41 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -16,10 +16,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/gpio.h>
@@ -37,13 +33,12 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/board-kzmarm11.h>
#include <mach/clock.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/memory.h>
+#include "devices-imx31.h"
#include "devices.h"
#define KZM_ARM11_IO_ADDRESS(x) ( \
@@ -51,6 +46,23 @@
IMX_IO_ADDRESS(x, MX31_CS5) ?: \
MX31_IO_ADDRESS(x))
+/*
+ * KZM-ARM11-01 Board Control Registers on FPGA
+ */
+#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003)
+
+/*
+ * External UART for touch panel on FPGA
+ */
+#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050)
+
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
/*
* KZM-ARM11-01 has an external UART on FPGA
@@ -173,15 +185,14 @@
#endif
#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static void __init kzm_init_imx_uart(void)
{
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ imx31_add_imx_uart0(&uart_pdata);
+ imx31_add_imx_uart1(&uart_pdata);
}
#else
static inline void kzm_init_imx_uart(void)
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 7e8d09a..d4d9e7a 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -10,10 +10,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/delay.h>
@@ -37,19 +33,46 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <mach/common.h>
-#include <mach/board-mx31_3ds.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
+
+#include "devices-imx31.h"
#include "devices.h"
-/*!
- * @file mx31_3ds.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR MX3x_CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000)
+
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0)
+
+#define MXC_MAX_EXP_IO_LINES 16
+
+/*
+ * This file contains the board-specific initialization routines.
*/
static int mx31_3ds_pins[] = {
@@ -145,7 +168,7 @@
MXC_SPI_CS(2),
};
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
.chipselect = spi1_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi1_internal_chipselect),
};
@@ -165,7 +188,8 @@
/*
* NAND Flash
*/
-static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
+static const struct mxc_nand_platform_data
+mx31_3ds_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
@@ -225,7 +249,7 @@
.phy_mode = FSL_USB2_PHY_ULPI,
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -407,10 +431,10 @@
mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
"mx31_3ds");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
+ imx31_add_imx_uart0(&uart_pdata);
+ imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
- mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+ imx31_add_spi_imx0(&spi1_pdata);
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index b3d1a18..94b3e7c 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
@@ -33,8 +29,6 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <mach/common.h>
-#include <mach/board-mx31ads.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -43,14 +37,45 @@
#include <linux/mfd/wm8350/pmic.h>
#endif
+#include "devices-imx31.h"
#include "devices.h"
-/*!
- * @file mx31ads.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
+/* Base address of PBC controller */
+#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
+/* Offsets for the PBC Controller register */
+
+/* PBC Board interrupt status register */
+#define PBC_INTSTATUS 0x000016
+
+/* PBC Board interrupt current status register */
+#define PBC_INTCURR_STATUS 0x000018
+
+/* PBC Interrupt mask register set address */
+#define PBC_INTMASK_SET 0x00001A
+
+/* PBC Interrupt mask register clear address */
+#define PBC_INTMASK_CLEAR 0x00001C
+
+/* External UART A */
+#define PBC_SC16C652_UARTA 0x010000
+
+/* External UART B */
+#define PBC_SC16C652_UARTB 0x010010
+
+#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
+#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+
+#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11)
+
+#define MXC_MAX_EXP_IO_LINES 16
+/*
+ * This file contains the board-specific initialization routines.
*/
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
@@ -98,7 +123,7 @@
#endif
#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -112,7 +137,7 @@
static inline void mxc_init_imx_uart(void)
{
mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ imx31_add_imx_uart0(&uart_pdata);
}
#else /* !SERIAL_IMX */
static inline void mxc_init_imx_uart(void)
@@ -475,7 +500,7 @@
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
- mxc_register_device(&mxc_i2c_device1, NULL);
+ imx31_add_imx_i2c1(NULL);
}
#else
static void mxc_init_i2c(void)
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 46bf57c..84942cf 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -18,10 +18,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
@@ -46,10 +42,10 @@
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31lilly.h>
-#include <mach/spi.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
+#include "devices-imx31.h"
#include "devices.h"
/*
@@ -257,12 +253,12 @@
MXC_SPI_CS(2),
};
-static struct spi_imx_master spi0_pdata = {
+static const struct spi_imx_master spi0_pdata __initconst = {
.chipselect = spi_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
};
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
.chipselect = spi_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
};
@@ -315,8 +311,8 @@
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
- mxc_register_device(&mxc_spi_device0, &spi0_pdata);
- mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+ imx31_add_spi_imx0(&spi0_pdata);
+ imx31_add_spi_imx1(&spi1_pdata);
spi_register_board_info(&mc13783_dev, 1);
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 2b6d114..da236c4 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
@@ -42,14 +38,12 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/board-mx31lite.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/irqs.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
+#include "devices-imx31.h"
#include "devices.h"
/*
@@ -69,7 +63,8 @@
MX31_PIN_CSPI2_SS2__SS2,
};
-static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx31lite_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
@@ -112,7 +107,7 @@
MXC_SPI_CS(0),
};
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
.chipselect = spi_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
};
@@ -253,9 +248,9 @@
/* NOR and NAND flash */
platform_device_register(&physmap_flash_device);
- mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+ imx31_add_mxc_nand(&mx31lite_nand_board_info);
- mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+ imx31_add_spi_imx1(&spi1_pdata);
spi_register_board_info(&mc13783_spi_dev, 1);
#if defined(CONFIG_USB_ULPI)
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 33a8d35..67776bc 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -10,10 +10,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/delay.h>
@@ -42,16 +38,15 @@
#include <mach/board-mx31moboard.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/ipu.h>
-#include <mach/i2c.h>
#include <mach/mmc.h>
#include <mach/mxc_ehci.h>
#include <mach/mx3_camera.h>
#include <mach/spi.h>
#include <mach/ulpi.h>
+#include "devices-imx31.h"
#include "devices.h"
static unsigned int moboard_pins[] = {
@@ -130,24 +125,36 @@
static int moboard_uart0_init(struct platform_device *pdev)
{
- gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
- gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
- return 0;
+ int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+ if (ret)
+ return ret;
+
+ ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+ if (ret)
+ gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
+
+ return ret;
}
-static struct imxuart_platform_data uart0_pdata = {
+static void moboard_uart0_exit(struct platform_device *pdev)
+{
+ gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
+}
+
+static const struct imxuart_platform_data uart0_pdata __initconst = {
.init = moboard_uart0_init,
+ .exit = moboard_uart0_exit,
};
-static struct imxuart_platform_data uart4_pdata = {
+static const struct imxuart_platform_data uart4_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct imxi2c_platform_data moboard_i2c0_pdata = {
+static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
.bitrate = 400000,
};
-static struct imxi2c_platform_data moboard_i2c1_pdata = {
+static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
.bitrate = 100000,
};
@@ -156,7 +163,7 @@
MXC_SPI_CS(2),
};
-static struct spi_imx_master moboard_spi1_master = {
+static const struct spi_imx_master moboard_spi1_pdata __initconst = {
.chipselect = moboard_spi1_cs,
.num_chipselect = ARRAY_SIZE(moboard_spi1_cs),
};
@@ -220,11 +227,54 @@
},
};
+static struct mc13783_led_platform_data moboard_led[] = {
+ {
+ .id = MC13783_LED_R1,
+ .name = "coreboard-led-4:red",
+ .max_current = 2,
+ },
+ {
+ .id = MC13783_LED_G1,
+ .name = "coreboard-led-4:green",
+ .max_current = 2,
+ },
+ {
+ .id = MC13783_LED_B1,
+ .name = "coreboard-led-4:blue",
+ .max_current = 2,
+ },
+ {
+ .id = MC13783_LED_R2,
+ .name = "coreboard-led-5:red",
+ .max_current = 3,
+ },
+ {
+ .id = MC13783_LED_G2,
+ .name = "coreboard-led-5:green",
+ .max_current = 3,
+ },
+ {
+ .id = MC13783_LED_B2,
+ .name = "coreboard-led-5:blue",
+ .max_current = 3,
+ },
+};
+
+static struct mc13783_leds_platform_data moboard_leds = {
+ .num_leds = ARRAY_SIZE(moboard_led),
+ .led = moboard_led,
+ .flags = MC13783_LED_SLEWLIMTC,
+ .abmode = MC13783_LED_AB_DISABLED,
+ .tc1_period = MC13783_LED_PERIOD_10MS,
+ .tc2_period = MC13783_LED_PERIOD_10MS,
+};
+
static struct mc13783_platform_data moboard_pmic = {
.regulators = moboard_regulators,
.num_regulators = ARRAY_SIZE(moboard_regulators),
+ .leds = &moboard_leds,
.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
- MC13783_USE_ADC,
+ MC13783_USE_ADC | MC13783_USE_LED,
};
static struct spi_board_info moboard_spi_board_info[] __initdata = {
@@ -243,7 +293,7 @@
MXC_SPI_CS(1),
};
-static struct spi_imx_master moboard_spi2_master = {
+static const struct spi_imx_master moboard_spi2_pdata __initconst = {
.chipselect = moboard_spi2_cs,
.num_chipselect = ARRAY_SIZE(moboard_spi2_cs),
};
@@ -456,15 +506,14 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_register_device(&mxc_uart_device0, &uart0_pdata);
+ imx31_add_imx_uart0(&uart0_pdata);
+ imx31_add_imx_uart4(&uart4_pdata);
- mxc_register_device(&mxc_uart_device4, &uart4_pdata);
+ imx31_add_imx_i2c0(&moboard_i2c0_data);
+ imx31_add_imx_i2c1(&moboard_i2c1_data);
- mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
- mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
-
- mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
- mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
+ imx31_add_spi_imx1(&moboard_spi1_pdata);
+ imx31_add_spi_imx2(&moboard_spi2_pdata);
gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
diff --git a/arch/arm/mach-mx3/mach-mx35pdk.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
similarity index 89%
rename from arch/arm/mach-mx3/mach-mx35pdk.c
rename to arch/arm/mach-mx3/mach-mx35_3ds.c
index bcac84d..1c30d72 100644
--- a/arch/arm/mach-mx3/mach-mx35pdk.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -12,10 +12,12 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * This machine is known as:
+ * - i.MX35 3-Stack Development System
+ * - i.MX35 Platform Development Kit (i.MX35 PDK)
*/
#include <linux/types.h>
@@ -32,12 +34,12 @@
#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx35.h>
+#include "devices-imx35.h"
#include "devices.h"
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -90,7 +92,7 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ imx35_add_imx_uart0(&uart_pdata);
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index bb6c056..8a292dd 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -10,10 +10,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
@@ -43,20 +39,17 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/board-pcm037.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/ipu.h>
#include <mach/mmc.h>
#include <mach/mx3_camera.h>
#include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
+#include "devices-imx31.h"
#include "devices.h"
#include "pcm037.h"
@@ -225,7 +218,7 @@
.num_resources = 1,
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -279,16 +272,17 @@
.resource = &pcm038_sram_resource,
};
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm037_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
-static struct imxi2c_platform_data pcm037_i2c_1_data = {
+static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = {
.bitrate = 100000,
};
-static struct imxi2c_platform_data pcm037_i2c_2_data = {
+static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = {
.bitrate = 20000,
};
@@ -615,9 +609,10 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
- mxc_register_device(&mxc_uart_device2, &uart_pdata);
+ imx31_add_imx_uart0(&uart_pdata);
+ /* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
+ imx31_add_imx_uart1(&uart_pdata);
+ imx31_add_imx_uart2(&uart_pdata);
mxc_register_device(&mxc_w1_master_device, NULL);
@@ -635,10 +630,10 @@
i2c_register_board_info(1, pcm037_i2c_devices,
ARRAY_SIZE(pcm037_i2c_devices));
- mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
- mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+ imx31_add_imx_i2c1(&pcm037_i2c1_data);
+ imx31_add_imx_i2c2(&pcm037_i2c2_data);
- mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+ imx31_add_mxc_nand(&pcm037_nand_board_info);
mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 8d38600..c8b9821 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -13,9 +13,6 @@
#include <linux/spi/spi.h>
#include <mach/common.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
#include <mach/iomux-mx3.h>
#include <asm/mach-types.h>
@@ -64,7 +61,7 @@
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
-struct spi_imx_master pcm037_spi1_master = {
+static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
.chipselect = pcm037_spi1_cs,
.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
};
@@ -184,7 +181,7 @@
/* SPI */
spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
- mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+ imx35_add_spi_imx0(&pcm037_spi1_pdata);
#endif
platform_device_register(&pcm037_gpio_keys_device);
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 8071b72..b92f624 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -10,10 +10,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
@@ -40,19 +36,15 @@
#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-#include <mach/i2c.h>
-#endif
#include <mach/iomux-mx35.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include <mach/audmux.h>
#include <mach/ssi.h>
+#include "devices-imx35.h"
#include "devices.h"
static const struct fb_videomode fb_modedb[] = {
@@ -122,12 +114,12 @@
.num_resources = 1,
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-static struct imxi2c_platform_data pcm043_i2c_1_data = {
+static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
.bitrate = 50000,
};
@@ -304,7 +296,8 @@
.flags = IMX_SSI_USE_AC97,
};
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm037_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
};
@@ -363,17 +356,17 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+ imx35_add_imx_uart0(&uart_pdata);
+ imx35_add_mxc_nand(&pcm037_nand_board_info);
mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ imx35_add_imx_uart1(&uart_pdata);
#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
i2c_register_board_info(0, pcm043_i2c_devices,
ARRAY_SIZE(pcm043_i2c_devices));
- mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+ imx35_add_imx_i2c0(&pcm043_i2c0_data);
#endif
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
index e5b5b83..d44ac70 100644
--- a/arch/arm/mach-mx3/mach-qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -10,10 +10,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
@@ -34,9 +30,9 @@
#include <mach/common.h>
#include <asm/page.h>
#include <asm/setup.h>
-#include <mach/board-qong.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+
+#include "devices-imx31.h"
#include "devices.h"
/* FPGA defines */
@@ -62,7 +58,7 @@
* This file contains the board-specific initialization routines.
*/
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -73,11 +69,11 @@
MX31_PIN_RXD1__RXD1
};
-static inline void mxc_init_imx_uart(void)
+static inline void __init mxc_init_imx_uart(void)
{
mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
"uart-0");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ imx31_add_imx_uart0(&uart_pdata);
}
static struct resource dnet_resources[] = {
@@ -116,7 +112,7 @@
static struct resource qong_flash_resource = {
.start = MX31_CS0_BASE_ADDR,
- .end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+ .end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
.flags = IORESOURCE_MEM,
};
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 6858a4f..a378fba 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -14,10 +14,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/mm.h>
@@ -97,8 +93,11 @@
}
#endif
+int imx3x_register_gpios(void);
+
void __init mx31_init_irq(void)
{
+ imx3x_register_gpios();
mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
}
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
index 7aebd74..827fd3c 100644
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -18,10 +18,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
@@ -36,13 +32,13 @@
#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31lilly.h>
#include <mach/mmc.h>
#include <mach/mx3fb.h>
#include <mach/ipu.h>
+#include "devices-imx31.h"
#include "devices.h"
/*
@@ -96,7 +92,7 @@
};
/* UART */
-static struct imxuart_platform_data uart_pdata __initdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -217,9 +213,9 @@
mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
ARRAY_SIZE(lilly_db_board_pins),
"development board pins");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
- mxc_register_device(&mxc_uart_device2, &uart_pdata);
+ imx31_add_imx_uart0(&uart_pdata);
+ imx31_add_imx_uart1(&uart_pdata);
+ imx31_add_imx_uart2(&uart_pdata);
mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
mx31lilly_init_fb();
}
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 5f05bfb..7b0e74e 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -18,10 +18,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
@@ -37,12 +33,11 @@
#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31lite.h>
#include <mach/mmc.h>
-#include <mach/spi.h>
+#include "devices-imx31.h"
#include "devices.h"
/*
@@ -76,7 +71,7 @@
};
/* UART */
-static struct imxuart_platform_data uart_pdata __initdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -161,7 +156,7 @@
MXC_SPI_CS(2),
};
-static struct spi_imx_master spi0_pdata = {
+static const struct spi_imx_master spi0_pdata __initconst = {
.chipselect = spi_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
};
@@ -201,9 +196,9 @@
mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
ARRAY_SIZE(litekit_db_board_pins),
"development board pins");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ imx31_add_imx_uart0(&uart_pdata);
mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
- mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+ imx31_add_spi_imx0(&spi0_pdata);
platform_device_register(&litekit_led_device);
mxc_register_device(&imx_wdt_device0, NULL);
mxc_register_device(&imx_rtc_device0, NULL);
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 582299c..fc395a7 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -10,10 +10,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/gpio.h>
@@ -27,13 +23,13 @@
#include <linux/usb/otg.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/hardware.h>
#include <mach/mmc.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
+#include "devices-imx31.h"
#include "devices.h"
static unsigned int devboard_pins[] = {
@@ -56,7 +52,7 @@
MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -230,7 +226,7 @@
mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
"devboard");
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ imx31_add_imx_uart1(&uart_pdata);
mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 4930f8c..0551eb3 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -10,10 +10,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/delay.h>
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index 293eea6..40c3e75 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -10,10 +10,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/delay.h>
@@ -30,7 +26,6 @@
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31moboard.h>
#include <mach/mxc_ehci.h>
@@ -38,6 +33,7 @@
#include <media/soc_camera.h>
+#include "devices-imx31.h"
#include "devices.h"
static unsigned int smartbot_pins[] = {
@@ -59,7 +55,7 @@
MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
};
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -183,8 +179,7 @@
mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
"smartbot");
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
-
+ imx31_add_imx_uart1(&uart_pdata);
switch (board) {
case MX31SMARTBOT:
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index ede4fcb..fa11864 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -253,7 +253,7 @@
},
};
-int __init mxc_register_gpios(void)
+int __init imx51_register_gpios(void)
{
return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
}
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index b7677ef..2f79722 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -65,6 +65,8 @@
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+int imx51_register_gpios(void);
+
void __init mx51_init_irq(void)
{
unsigned long tzic_addr;
@@ -79,5 +81,6 @@
if (!tzic_virt)
panic("unable to map TZIC interrupt controller\n");
+ imx51_register_gpios();
tzic_init_irq(tzic_virt);
}
diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h
index ce4f590..b989bac 100644
--- a/arch/arm/mach-mxc91231/crm_regs.h
+++ b/arch/arm/mach-mxc91231/crm_regs.h
@@ -11,11 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c
index 353bd97..027af4f 100644
--- a/arch/arm/mach-mxc91231/devices.c
+++ b/arch/arm/mach-mxc91231/devices.c
@@ -135,7 +135,7 @@
},
};
-int __init mxc_register_gpios(void)
+int __init mxc91231_register_gpios(void)
{
return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
}
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
index 6becda3..aeccfd75 100644
--- a/arch/arm/mach-mxc91231/mm.c
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -15,11 +15,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
#include <linux/mm.h>
@@ -88,7 +83,10 @@
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+int mxc91231_register_gpios(void);
+
void __init mxc91231_init_irq(void)
{
+ mxc91231_register_gpios();
mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
}
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index e7d629b..f474a80 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -137,9 +137,7 @@
}
gpio_direction_input(ts_gpio);
-
- omap_set_gpio_debounce(ts_gpio, 1);
- omap_set_gpio_debounce_time(ts_gpio, 0xa);
+ gpio_set_debounce(ts_gpio, 310);
}
static int ads7846_get_pendown_state(void)
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 5fcb52e..fefd7e6 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -209,8 +209,7 @@
}
gpio_direction_input(ts_gpio);
- omap_set_gpio_debounce(ts_gpio, 1);
- omap_set_gpio_debounce_time(ts_gpio, 0xa);
+ gpio_set_debounce(ts_gpio, 310);
}
static int ads7846_get_pendown_state(void)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 81bba19..b952610 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -579,9 +579,7 @@
printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
gpio_direction_input(OMAP3_EVM_TS_GPIO);
-
- omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
- omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+ gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310);
}
static int ads7846_get_pendown_state(void)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 395d049..db06dc9 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -130,8 +130,8 @@
static void __init pandora_keys_gpio_init(void)
{
/* set debounce time for GPIO banks 4 and 6 */
- omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME);
- omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
+ gpio_set_debounce(32 * 3, GPIO_DEBOUNCE_TIME);
+ gpio_set_debounce(32 * 5, GPIO_DEBOUNCE_TIME);
}
static int board_keymap[] = {
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 2504d41..2f5f823 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -328,8 +328,7 @@
}
gpio_direction_input(OMAP3_TS_GPIO);
- omap_set_gpio_debounce(OMAP3_TS_GPIO, 1);
- omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa);
+ gpio_set_debounce(OMAP3_TS_GPIO, 310);
}
static struct ads7846_platform_data ads7846_config = {
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 685f34a..fe0de16 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -240,22 +240,23 @@
#define ORION_BLINK_HALF_PERIOD 100 /* ms */
-static int dns323_gpio_blink_set(unsigned gpio,
+static int dns323_gpio_blink_set(unsigned gpio, int state,
unsigned long *delay_on, unsigned long *delay_off)
{
- static int value = 0;
- if (!*delay_on && !*delay_off)
+ if (delay_on && delay_off && !*delay_on && !*delay_off)
*delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
- if (ORION_BLINK_HALF_PERIOD == *delay_on
- && ORION_BLINK_HALF_PERIOD == *delay_off) {
- value = !value;
- orion_gpio_set_blink(gpio, value);
- return 0;
+ switch(state) {
+ case GPIO_LED_NO_BLINK_LOW:
+ case GPIO_LED_NO_BLINK_HIGH:
+ orion_gpio_set_blink(gpio, 0);
+ gpio_set_value(gpio, state);
+ break;
+ case GPIO_LED_BLINK:
+ orion_gpio_set_blink(gpio, 1);
}
-
- return -EINVAL;
+ return 0;
}
static struct gpio_led dns323_leds[] = {
@@ -263,6 +264,7 @@
.name = "power:blue",
.gpio = DNS323_GPIO_LED_POWER2,
.default_trigger = "timer",
+ .active_low = 1,
}, {
.name = "right:amber",
.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 45799c6..9e39faa 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -49,7 +49,6 @@
#include <linux/io.h>
#include <linux/i2c.h>
-#include <linux/backlight.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/pcf50633/core.h>
@@ -57,6 +56,7 @@
#include <linux/mfd/pcf50633/adc.h>
#include <linux/mfd/pcf50633/gpio.h>
#include <linux/mfd/pcf50633/pmic.h>
+#include <linux/mfd/pcf50633/backlight.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -254,6 +254,12 @@
"battery",
};
+static struct pcf50633_bl_platform_data gta02_backlight_data = {
+ .default_brightness = 0x3f,
+ .default_brightness_limit = 0,
+ .ramp_time = 5,
+};
+
struct pcf50633_platform_data gta02_pcf_pdata = {
.resumers = {
[0] = PCF50633_INT1_USBINS |
@@ -271,6 +277,8 @@
.charger_reference_current_ma = 1000,
+ .backlight_data = >a02_backlight_data,
+
.reg_init_data = {
[PCF50633_REGULATOR_AUTO] = {
.constraints = {
@@ -478,71 +486,6 @@
};
-
-
-static void gta02_bl_set_intensity(int intensity)
-{
- struct pcf50633 *pcf = gta02_pcf;
- int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
-
- /* We map 8-bit intensity to 6-bit intensity in hardware. */
- intensity >>= 2;
-
- /*
- * This can happen during, eg, print of panic on blanked console,
- * but we can't service i2c without interrupts active, so abort.
- */
- if (in_atomic()) {
- printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n");
- return;
- }
-
- old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
- if (intensity == old_intensity)
- return;
-
- /* We can't do this anywhere else. */
- pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
-
- if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
- old_intensity = 0;
-
- /*
- * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
- * if seen, you have to re-enable the LED unit.
- */
- if (!intensity || !old_intensity)
- pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
-
- /* Illegal to set LEDOUT to 0. */
- if (!intensity)
- pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2);
- else
- pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
- intensity);
-
- if (intensity)
- pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
-
-}
-
-static struct generic_bl_info gta02_bl_info = {
- .name = "gta02-bl",
- .max_intensity = 0xff,
- .default_intensity = 0xff,
- .set_bl_intensity = gta02_bl_set_intensity,
-};
-
-static struct platform_device gta02_bl_dev = {
- .name = "generic-bl",
- .id = 1,
- .dev = {
- .platform_data = >a02_bl_info,
- },
-};
-
-
-
/* USB */
static struct s3c2410_hcd_info gta02_usb_info __initdata = {
.port[0] = {
@@ -579,7 +522,6 @@
/* These guys DO need to be children of PMU. */
static struct platform_device *gta02_devices_pmu_children[] = {
- >a02_bl_dev,
};
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 7a4138b..fbd85a9 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -259,6 +259,12 @@
.enable = s3c64xx_hclk_ctrl,
.ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
}, {
+ .name = "otg",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_USB,
+ }, {
.name = "timers",
.id = -1,
.parent = &clk_p,
diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h
index a4b9b40..911854d 100644
--- a/arch/arm/mach-s5p6440/include/mach/irqs.h
+++ b/arch/arm/mach-s5p6440/include/mach/irqs.h
@@ -72,7 +72,14 @@
#define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6)
#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE)
-#define IRQ_EINT(x) S5P_EINT(x)
+
+#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE)
+/*
+ * S5P6440 has 0-15 external interrupts in group 0. Only these can be used
+ * to wake up from sleep. If request is beyond this range, by mistake, a large
+ * return value for an irq number should be indication of something amiss.
+ */
+#define S5P_EINT_BASE2 (0xf0000000)
/*
* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h
index da66580..02c2374 100644
--- a/arch/arm/mach-s5p6442/include/mach/irqs.h
+++ b/arch/arm/mach-s5p6442/include/mach/irqs.h
@@ -77,8 +77,9 @@
#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1)
-#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \
- (S5P_IRQ_EINT_BASE + (x)-16))
+#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE)
+
/* Set the default NR_IRQS */
#define NR_IRQS (IRQ_EINT(31) + 1)
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 15066df..28aa551 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -100,9 +100,6 @@
#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
-#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \
- (S5P_EINT_BASE2 + (x) - 16))
-
#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1)
#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x))
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
index 763edebd..dd6295e 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
@@ -60,12 +60,9 @@
#define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40)
#define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4))
-#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) : \
- (((irq) - S5P_EINT_BASE2)))
+#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
-#define EINT_REG_NR(x) (eint_offset(x) >> 3)
-
-#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7))
+#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
/* values for S5P_EXTINT0 */
#define S5P_EXTINT_LOWLEV (0x00)
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index 92fc6c7..9689537 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -118,22 +118,12 @@
#define IRQ_MDNIE3 S5P_IRQ_VIC3(8)
#define IRQ_VIC_END S5P_IRQ_VIC3(31)
-#define S5P_EINT_16_31_BASE (IRQ_VIC_END + 1)
-
-#define EINT_MODE S3C_GPIO_SFN(0xf)
-
-#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_IRQ_VIC0(0)) \
- : ((x) + S5P_EINT_16_31_BASE))
+#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
/* Set the default NR_IRQS */
-
#define NR_IRQS (IRQ_EINT(31) + 1)
-#define EINT_GPIO_0(x) S5PV210_GPH0(x)
-#define EINT_GPIO_1(x) S5PV210_GPH1(x)
-#define EINT_GPIO_2(x) S5PV210_GPH2(x)
-#define EINT_GPIO_3(x) S5PV210_GPH3(x)
-
/* Compatibility */
#define IRQ_LCD_FIFO IRQ_LCD0
#define IRQ_LCD_VSYNC IRQ_LCD1
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
index 6d06809..49e029b 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
@@ -27,12 +27,9 @@
#define S5PV210_EINT30PEND (S5P_VA_GPIO + 0xF40)
#define S5P_EINT_PEND(x) (S5PV210_EINT30PEND + ((x) * 0x4))
-#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) \
- : ((irq) - S5P_EINT_16_31_BASE))
+#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
-#define EINT_REG_NR(x) (eint_offset(x) >> 3)
-
-#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7))
+#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
/* values for S5P_EXTINT0 */
#define S5P_EXTINT_LOWLEV (0x00)
@@ -41,4 +38,11 @@
#define S5P_EXTINT_RISEEDGE (0x03)
#define S5P_EXTINT_BOTHEDGE (0x04)
+#define EINT_MODE S3C_GPIO_SFN(0xf)
+
+#define EINT_GPIO_0(x) S5PV210_GPH0(x)
+#define EINT_GPIO_1(x) S5PV210_GPH1(x)
+#define EINT_GPIO_2(x) S5PV210_GPH2(x)
+#define EINT_GPIO_3(x) S5PV210_GPH3(x)
+
#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index c73ed06..f0394ba 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -9,7 +9,7 @@
*/
#include <linux/kernel.h>
#include <linux/i2c.h>
-#include <linux/mfd/ab3100.h>
+#include <linux/mfd/abx500.h>
#include <linux/regulator/machine.h>
#include <linux/amba/bus.h>
#include <mach/irqs.h>
@@ -46,6 +46,7 @@
/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
#define BUCK_SLEEP_SETTING 0xAC
+#ifdef CONFIG_AB3100_CORE
static struct regulator_consumer_supply supply_ldo_c[] = {
{
.dev_name = "ab3100-codec",
@@ -253,14 +254,68 @@
LDO_D_SETTING,
},
};
+#endif
+
+#ifdef CONFIG_AB3550_CORE
+static struct abx500_init_settings ab3550_init_settings[] = {
+ {
+ .bank = 0,
+ .reg = AB3550_IMR1,
+ .setting = 0xff
+ },
+ {
+ .bank = 0,
+ .reg = AB3550_IMR2,
+ .setting = 0xff
+ },
+ {
+ .bank = 0,
+ .reg = AB3550_IMR3,
+ .setting = 0xff
+ },
+ {
+ .bank = 0,
+ .reg = AB3550_IMR4,
+ .setting = 0xff
+ },
+ {
+ .bank = 0,
+ .reg = AB3550_IMR5,
+ /* The two most significant bits are not used */
+ .setting = 0x3f
+ },
+};
+
+static struct ab3550_platform_data ab3550_plf_data = {
+ .irq = {
+ .base = IRQ_AB3550_BASE,
+ .count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1),
+ },
+ .dev_data = {
+ },
+ .init_settings = ab3550_init_settings,
+ .init_settings_sz = ARRAY_SIZE(ab3550_init_settings),
+};
+#endif
static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
+#if defined(CONFIG_AB3550_CORE)
+ {
+ .type = "ab3550",
+ .addr = 0x4A,
+ .irq = IRQ_U300_IRQ0_EXT,
+ .platform_data = &ab3550_plf_data,
+ },
+#elif defined(CONFIG_AB3100_CORE)
{
.type = "ab3100",
.addr = 0x48,
.irq = IRQ_U300_IRQ0_EXT,
.platform_data = &ab3100_plf_data,
},
+#else
+ { },
+#endif
};
static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index a6867b1..09b1b28 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -109,6 +109,13 @@
#define U300_NR_IRQS 48
#endif
+#ifdef CONFIG_AB3550_CORE
+#define IRQ_AB3550_BASE (U300_NR_IRQS)
+#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37)
+
+#define NR_IRQS (IRQ_AB3550_END + 1)
+#else
#define NR_IRQS U300_NR_IRQS
+#endif
#endif
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 072196c..bb8d7b7 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -50,7 +50,7 @@
static struct spi_board_info u8500_spi_devices[] = {
{
- .modalias = "ab4500",
+ .modalias = "ab8500",
.controller_data = &ab4500_chip_info,
.max_speed_hz = 12000000,
.bus_num = 0,
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 1b2c989..6544855 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -411,7 +411,7 @@
CLK(apetraceclk, "apetrace", NULL),
CLK(mcdeclk, "mcde", NULL),
CLK(ipi2clk, "ipi2", NULL),
- CLK(dmaclk, "dma40", NULL),
+ CLK(dmaclk, "dma40.0", NULL),
CLK(b2r2clk, "b2r2", NULL),
CLK(tvclk, "tv", NULL),
};
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index d04299f..f21c444 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -32,6 +32,7 @@
&u8500_gpio_devs[6],
&u8500_gpio_devs[7],
&u8500_gpio_devs[8],
+ &u8500_dma40_device,
};
/* minimum static i/o mapping required to boot U8500 platforms */
@@ -71,6 +72,9 @@
{
ux500_init_devices();
+ if (cpu_is_u8500ed())
+ dma40_u8500ed_fixup();
+
/* Register the platform devices */
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 2033423..8229034 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -12,9 +12,13 @@
#include <linux/gpio.h>
#include <linux/amba/bus.h>
+#include <plat/ste_dma40.h>
+
#include <mach/hardware.h>
#include <mach/setup.h>
+#include "ste-dma40-db8500.h"
+
static struct nmk_gpio_platform_data u8500_gpio_data[] = {
GPIO_DATA("GPIO-0-31", 0),
GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */
@@ -105,3 +109,108 @@
.resource = u8500_i2c4_resources,
.num_resources = ARRAY_SIZE(u8500_i2c4_resources),
};
+
+static struct resource dma40_resources[] = {
+ [0] = {
+ .start = U8500_DMA_BASE,
+ .end = U8500_DMA_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "base",
+ },
+ [1] = {
+ .start = U8500_DMA_LCPA_BASE,
+ .end = U8500_DMA_LCPA_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "lcpa",
+ },
+ [2] = {
+ .start = U8500_DMA_LCLA_BASE,
+ .end = U8500_DMA_LCLA_BASE + 16 * 1024 - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "lcla",
+ },
+ [3] = {
+ .start = IRQ_DMA,
+ .end = IRQ_DMA,
+ .flags = IORESOURCE_IRQ}
+};
+
+/* Default configuration for physcial memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
+ .channel_type = (STEDMA40_CHANNEL_IN_PHY_MODE |
+ STEDMA40_LOW_PRIORITY_CHANNEL |
+ STEDMA40_PCHAN_BASIC_MODE),
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_PHY_1,
+
+ .dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_PHY_1,
+
+};
+/* Default configuration for logical memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_log = {
+ .channel_type = (STEDMA40_CHANNEL_IN_LOG_MODE |
+ STEDMA40_LOW_PRIORITY_CHANNEL |
+ STEDMA40_LCHAN_SRC_LOG_DST_LOG |
+ STEDMA40_NO_TIM_FOR_LINK),
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_LOG_1,
+
+ .dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_1,
+
+};
+
+/*
+ * Mapping between destination event lines and physical device address.
+ * The event line is tied to a device and therefor the address is constant.
+ */
+static const dma_addr_t dma40_tx_map[STEDMA40_NR_DEV];
+
+/* Mapping between source event lines and physical device address */
+static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV];
+
+/* Reserved event lines for memcpy only */
+static int dma40_memcpy_event[] = {
+ STEDMA40_MEMCPY_TX_1,
+ STEDMA40_MEMCPY_TX_2,
+ STEDMA40_MEMCPY_TX_3,
+ STEDMA40_MEMCPY_TX_4,
+};
+
+static struct stedma40_platform_data dma40_plat_data = {
+ .dev_len = STEDMA40_NR_DEV,
+ .dev_rx = dma40_rx_map,
+ .dev_tx = dma40_tx_map,
+ .memcpy = dma40_memcpy_event,
+ .memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
+ .memcpy_conf_phy = &dma40_memcpy_conf_phy,
+ .memcpy_conf_log = &dma40_memcpy_conf_log,
+ .llis_per_log = 8,
+};
+
+struct platform_device u8500_dma40_device = {
+ .dev = {
+ .platform_data = &dma40_plat_data,
+ },
+ .name = "dma40",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dma40_resources),
+ .resource = dma40_resources
+};
+
+void dma40_u8500ed_fixup(void)
+{
+ dma40_plat_data.memcpy = NULL;
+ dma40_plat_data.memcpy_len = 0;
+ dma40_resources[0].start = U8500_DMA_BASE_ED;
+ dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1;
+}
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 9169e1e..85fc6a8 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -7,6 +7,18 @@
#ifndef __MACH_DB8500_REGS_H
#define __MACH_DB8500_REGS_H
+/* Base address and bank offsets for ESRAM */
+#define U8500_ESRAM_BASE 0x40000000
+#define U8500_ESRAM_BANK_SIZE 0x00020000
+#define U8500_ESRAM_BANK0 U8500_ESRAM_BASE
+#define U8500_ESRAM_BANK1 (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
+/* Use bank 4 for DMA LCLA and LCPA */
+#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4
+#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK4 + 0x4000)
+
#define U8500_PER3_BASE 0x80000000
#define U8500_STM_BASE 0x80100000
#define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000)
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index 0422af0..c2b2f25 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -25,5 +25,8 @@
extern struct platform_device u8500_i2c0_device;
extern struct platform_device u8500_i2c4_device;
+extern struct platform_device u8500_dma40_device;
+
+void dma40_u8500ed_fixup(void);
#endif
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
new file mode 100644
index 0000000..e701627
--- /dev/null
+++ b/arch/arm/mach-ux500/ste-dma40-db8500.h
@@ -0,0 +1,154 @@
+/*
+ * arch/arm/mach-ux500/ste_dma40_db8500.h
+ * DB8500-SoC-specific configuration for DMA40
+ *
+ * Copyright (C) ST-Ericsson 2007-2010
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Per Friden <per.friden@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#ifndef STE_DMA40_DB8500_H
+#define STE_DMA40_DB8500_H
+
+#define STEDMA40_NR_DEV 64
+
+enum dma_src_dev_type {
+ STEDMA40_DEV_SPI0_RX = 0,
+ STEDMA40_DEV_SD_MMC0_RX = 1,
+ STEDMA40_DEV_SD_MMC1_RX = 2,
+ STEDMA40_DEV_SD_MMC2_RX = 3,
+ STEDMA40_DEV_I2C1_RX = 4,
+ STEDMA40_DEV_I2C3_RX = 5,
+ STEDMA40_DEV_I2C2_RX = 6,
+ STEDMA40_DEV_I2C4_RX = 7, /* Only on V1 */
+ STEDMA40_DEV_SSP0_RX = 8,
+ STEDMA40_DEV_SSP1_RX = 9,
+ STEDMA40_DEV_MCDE_RX = 10,
+ STEDMA40_DEV_UART2_RX = 11,
+ STEDMA40_DEV_UART1_RX = 12,
+ STEDMA40_DEV_UART0_RX = 13,
+ STEDMA40_DEV_MSP2_RX = 14,
+ STEDMA40_DEV_I2C0_RX = 15,
+ STEDMA40_DEV_USB_OTG_IEP_8 = 16,
+ STEDMA40_DEV_USB_OTG_IEP_1_9 = 17,
+ STEDMA40_DEV_USB_OTG_IEP_2_10 = 18,
+ STEDMA40_DEV_USB_OTG_IEP_3_11 = 19,
+ STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
+ STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
+ STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
+ STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
+ STEDMA40_DEV_SRC_SXA0_RX_TX = 24,
+ STEDMA40_DEV_SRC_SXA1_RX_TX = 25,
+ STEDMA40_DEV_SRC_SXA2_RX_TX = 26,
+ STEDMA40_DEV_SRC_SXA3_RX_TX = 27,
+ STEDMA40_DEV_SD_MM2_RX = 28,
+ STEDMA40_DEV_SD_MM0_RX = 29,
+ STEDMA40_DEV_MSP1_RX = 30,
+ /*
+ * This channel is either SlimBus or MSP,
+ * never both at the same time.
+ */
+ STEDMA40_SLIM0_CH0_RX = 31,
+ STEDMA40_DEV_MSP0_RX = 31,
+ STEDMA40_DEV_SD_MM1_RX = 32,
+ STEDMA40_DEV_SPI2_RX = 33,
+ STEDMA40_DEV_I2C3_RX2 = 34,
+ STEDMA40_DEV_SPI1_RX = 35,
+ STEDMA40_DEV_USB_OTG_IEP_4_12 = 36,
+ STEDMA40_DEV_USB_OTG_IEP_5_13 = 37,
+ STEDMA40_DEV_USB_OTG_IEP_6_14 = 38,
+ STEDMA40_DEV_USB_OTG_IEP_7_15 = 39,
+ STEDMA40_DEV_SPI3_RX = 40,
+ STEDMA40_DEV_SD_MM3_RX = 41,
+ STEDMA40_DEV_SD_MM4_RX = 42,
+ STEDMA40_DEV_SD_MM5_RX = 43,
+ STEDMA40_DEV_SRC_SXA4_RX_TX = 44,
+ STEDMA40_DEV_SRC_SXA5_RX_TX = 45,
+ STEDMA40_DEV_SRC_SXA6_RX_TX = 46,
+ STEDMA40_DEV_SRC_SXA7_RX_TX = 47,
+ STEDMA40_DEV_CAC1_RX = 48,
+ /* RX channels 49 and 50 are unused */
+ STEDMA40_DEV_MSHC_RX = 51,
+ STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4 = 52,
+ STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5 = 53,
+ STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6 = 54,
+ STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7 = 55,
+ /* RX channels 56 thru 60 are unused */
+ STEDMA40_DEV_CAC0_RX = 61,
+ /* RX channels 62 and 63 are unused */
+};
+
+enum dma_dest_dev_type {
+ STEDMA40_DEV_SPI0_TX = 0,
+ STEDMA40_DEV_SD_MMC0_TX = 1,
+ STEDMA40_DEV_SD_MMC1_TX = 2,
+ STEDMA40_DEV_SD_MMC2_TX = 3,
+ STEDMA40_DEV_I2C1_TX = 4,
+ STEDMA40_DEV_I2C3_TX = 5,
+ STEDMA40_DEV_I2C2_TX = 6,
+ STEDMA50_DEV_I2C4_TX = 7, /* Only on V1 */
+ STEDMA40_DEV_SSP0_TX = 8,
+ STEDMA40_DEV_SSP1_TX = 9,
+ /* TX channel 10 is unused */
+ STEDMA40_DEV_UART2_TX = 11,
+ STEDMA40_DEV_UART1_TX = 12,
+ STEDMA40_DEV_UART0_TX= 13,
+ STEDMA40_DEV_MSP2_TX = 14,
+ STEDMA40_DEV_I2C0_TX = 15,
+ STEDMA40_DEV_USB_OTG_OEP_8 = 16,
+ STEDMA40_DEV_USB_OTG_OEP_1_9 = 17,
+ STEDMA40_DEV_USB_OTG_OEP_2_10= 18,
+ STEDMA40_DEV_USB_OTG_OEP_3_11 = 19,
+ STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
+ STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
+ STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
+ STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
+ STEDMA40_DEV_DST_SXA0_RX_TX = 24,
+ STEDMA40_DEV_DST_SXA1_RX_TX = 25,
+ STEDMA40_DEV_DST_SXA2_RX_TX = 26,
+ STEDMA40_DEV_DST_SXA3_RX_TX = 27,
+ STEDMA40_DEV_SD_MM2_TX = 28,
+ STEDMA40_DEV_SD_MM0_TX = 29,
+ STEDMA40_DEV_MSP1_TX = 30,
+ /*
+ * This channel is either SlimBus or MSP,
+ * never both at the same time.
+ */
+ STEDMA40_SLIM0_CH0_TX = 31,
+ STEDMA40_DEV_MSP0_TX = 31,
+ STEDMA40_DEV_SD_MM1_TX = 32,
+ STEDMA40_DEV_SPI2_TX = 33,
+ /* Secondary I2C3 channel */
+ STEDMA40_DEV_I2C3_TX2 = 34,
+ STEDMA40_DEV_SPI1_TX = 35,
+ STEDMA40_DEV_USB_OTG_OEP_4_12 = 36,
+ STEDMA40_DEV_USB_OTG_OEP_5_13 = 37,
+ STEDMA40_DEV_USB_OTG_OEP_6_14 = 38,
+ STEDMA40_DEV_USB_OTG_OEP_7_15 = 39,
+ STEDMA40_DEV_SPI3_TX = 40,
+ STEDMA40_DEV_SD_MM3_TX = 41,
+ STEDMA40_DEV_SD_MM4_TX = 42,
+ STEDMA40_DEV_SD_MM5_TX = 43,
+ STEDMA40_DEV_DST_SXA4_RX_TX = 44,
+ STEDMA40_DEV_DST_SXA5_RX_TX = 45,
+ STEDMA40_DEV_DST_SXA6_RX_TX = 46,
+ STEDMA40_DEV_DST_SXA7_RX_TX = 47,
+ STEDMA40_DEV_CAC1_TX = 48,
+ STEDMA40_DEV_CAC1_TX_HAC1_TX = 49,
+ STEDMA40_DEV_HAC1_TX = 50,
+ STEDMA40_MEMXCPY_TX_0 = 51,
+ STEDMA40_DEV_SLIM1_CH0_TX_HSI_TX_CH4 = 52,
+ STEDMA40_DEV_SLIM1_CH1_TX_HSI_TX_CH5 = 53,
+ STEDMA40_DEV_SLIM1_CH2_TX_HSI_TX_CH6 = 54,
+ STEDMA40_DEV_SLIM1_CH3_TX_HSI_TX_CH7 = 55,
+ STEDMA40_MEMCPY_TX_1 = 56,
+ STEDMA40_MEMCPY_TX_2 = 57,
+ STEDMA40_MEMCPY_TX_3 = 58,
+ STEDMA40_MEMCPY_TX_4 = 59,
+ STEDMA40_MEMCPY_TX_5 = 60,
+ STEDMA40_DEV_CAC0_TX = 61,
+ STEDMA40_DEV_CAC0_TX_HAC0_TX = 62,
+ STEDMA40_DEV_HAC0_TX = 63,
+};
+
+#endif
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 902ba9e..20b2e79 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -1,5 +1,7 @@
if ARCH_MXC
+source "arch/arm/plat-mxc/devices/Kconfig"
+
menu "Freescale MXC Implementations"
choice
@@ -8,15 +10,12 @@
config ARCH_MX1
bool "MX1-based"
- select CPU_ARM920T
- select IMX_HAVE_IOMUX_V1
+ select SOC_IMX1
help
This enables support for systems based on the Freescale i.MX1 family
config ARCH_MX2
bool "MX2-based"
- select CPU_ARM926T
- select IMX_HAVE_IOMUX_V1
help
This enables support for systems based on the Freescale i.MX2 family
@@ -49,8 +48,7 @@
endchoice
-source "arch/arm/mach-mx1/Kconfig"
-source "arch/arm/mach-mx2/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
source "arch/arm/mach-mx3/Kconfig"
source "arch/arm/mach-mx25/Kconfig"
source "arch/arm/mach-mxc91231/Kconfig"
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 895bc3c..c7506a8 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -8,8 +8,6 @@
# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
obj-$(CONFIG_MXC_TZIC) += tzic.o
-obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o
-obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_PWM) += pwm.o
@@ -21,3 +19,5 @@
obj-y += ssi-fiq.o
obj-y += ssi-fiq-ksym.o
endif
+
+obj-y += devices/
diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c
index b62917c..1180bef 100644
--- a/arch/arm/plat-mxc/audmux-v1.c
+++ b/arch/arm/plat-mxc/audmux-v1.c
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index ab94d78..f9e7cdb 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index 56f2fb5..735776d 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -18,6 +18,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/err.h>
#include <linux/platform_device.h>
#include <mach/common.h>
@@ -35,3 +36,35 @@
return ret;
}
+struct platform_device *__init imx_add_platform_device(const char *name, int id,
+ const struct resource *res, unsigned int num_resources,
+ const void *data, size_t size_data)
+{
+ int ret = -ENOMEM;
+ struct platform_device *pdev;
+
+ pdev = platform_device_alloc(name, id);
+ if (!pdev)
+ goto err;
+
+ if (res) {
+ ret = platform_device_add_resources(pdev, res, num_resources);
+ if (ret)
+ goto err;
+ }
+
+ if (data) {
+ ret = platform_device_add_data(pdev, data, size_data);
+ if (ret)
+ goto err;
+ }
+
+ ret = platform_device_add(pdev);
+ if (ret) {
+err:
+ platform_device_put(pdev);
+ return ERR_PTR(ret);
+ }
+
+ return pdev;
+}
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
new file mode 100644
index 0000000..09230f8
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -0,0 +1,11 @@
+config IMX_HAVE_PLATFORM_IMX_I2C
+ bool
+
+config IMX_HAVE_PLATFORM_IMX_UART
+ bool
+
+config IMX_HAVE_PLATFORM_MXC_NAND
+ bool
+
+config IMX_HAVE_PLATFORM_SPI_IMX
+ bool
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
new file mode 100644
index 0000000..5ecbb24
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
new file mode 100644
index 0000000..d0af9f7
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_imx_i2c(int id,
+ resource_size_t iobase, resource_size_t iosize, int irq,
+ const struct imxi2c_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = iobase,
+ .end = iobase + iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("imx-i2c", id, res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
new file mode 100644
index 0000000..fa3dff1
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_imx_uart_3irq(int id,
+ resource_size_t iobase, resource_size_t iosize,
+ resource_size_t irqrx, resource_size_t irqtx,
+ resource_size_t irqrts,
+ const struct imxuart_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = iobase,
+ .end = iobase + iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = irqrx,
+ .end = irqrx,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = irqtx,
+ .end = irqtx,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = irqrts,
+ .end = irqrx,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata));
+}
+
+struct platform_device *__init imx_add_imx_uart_1irq(int id,
+ resource_size_t iobase, resource_size_t iosize,
+ resource_size_t irq,
+ const struct imxuart_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = iobase,
+ .end = iobase + iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
new file mode 100644
index 0000000..1c28641
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/devices-common.h>
+
+static struct platform_device *__init imx_add_mxc_nand(resource_size_t iobase,
+ int irq, const struct mxc_nand_platform_data *pdata,
+ resource_size_t iosize)
+{
+ static int id = 0;
+
+ struct resource res[] = {
+ {
+ .start = iobase,
+ .end = iobase + iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("mxc_nand", id++, res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata));
+}
+
+struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase,
+ int irq, const struct mxc_nand_platform_data *pdata)
+{
+ return imx_add_mxc_nand(iobase, irq, pdata, SZ_4K);
+}
+
+struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase,
+ int irq, const struct mxc_nand_platform_data *pdata)
+{
+ return imx_add_mxc_nand(iobase, irq, pdata, SZ_8K);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
new file mode 100644
index 0000000..2831a6d
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_spi_imx(int id,
+ resource_size_t iobase, resource_size_t iosize, int irq,
+ const struct spi_imx_master *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = iobase,
+ .end = iobase + iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device("spi_imx", id, res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 6184792..35a064f 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -11,10 +11,6 @@
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/platform_device.h>
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
deleted file mode 100644
index 0376c13..0000000
--- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>.
- * All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
-#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
index a1fd583..45b2fb8 100644
--- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
@@ -25,7 +25,7 @@
#ifndef __ASSEMBLY__
/*
* This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
* TODO: Add your own baseboard init function and call it from
* inside eukrea_cpuimx27_init().
*
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
deleted file mode 100644
index 93cc66f..0000000
--- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H
-#define __ARM_ARCH_BOARD_KZM_ARM11_H
-
-/*
- * KZM-ARM11-01 Board Control Registers on FPGA
- */
-#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003)
-
-/*
- * External UART for touch panel on FPGA
- */
-#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050)
-
-#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
-
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
deleted file mode 100644
index 0cf4fa2..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
-
-/*
- * Memory-mapped I/O on MX21ADS base board
- */
-#define MX21ADS_MMIO_BASE_ADDR 0xF5000000
-#define MX21ADS_MMIO_SIZE SZ_16M
-
-#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
- (MX21ADS_MMIO_BASE_ADDR + (offset))
-
-#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11)
-#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000)
-#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
-#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
-#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
-
-/* MX21ADS_IO_REG bit definitions */
-#define MX21ADS_IO_SD_WP 0x0001 /* read */
-#define MX21ADS_IO_TP6 0x0001 /* write */
-#define MX21ADS_IO_SW_SEL 0x0002 /* read */
-#define MX21ADS_IO_TP7 0x0002 /* write */
-#define MX21ADS_IO_RESET_E_UART 0x0004
-#define MX21ADS_IO_RESET_BASE 0x0008
-#define MX21ADS_IO_CSI_CTL2 0x0010
-#define MX21ADS_IO_CSI_CTL1 0x0020
-#define MX21ADS_IO_CSI_CTL0 0x0040
-#define MX21ADS_IO_UART1_EN 0x0080
-#define MX21ADS_IO_UART4_EN 0x0100
-#define MX21ADS_IO_LCDON 0x0200
-#define MX21ADS_IO_IRDA_EN 0x0400
-#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
-#define MX21ADS_IO_IRDA_MD0_B 0x1000
-#define MX21ADS_IO_IRDA_MD1 0x2000
-#define MX21ADS_IO_LED4_ON 0x4000
-#define MX21ADS_IO_LED3_ON 0x8000
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
deleted file mode 100644
index 7776d23..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__
-
-/* external interrupt multiplexer */
-#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
-
-#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
-#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE
-#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1)
-#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2)
-
-#define MXC_MAX_BOARD_INTS (MXC_MAX_EXP_IO_LINES + \
- MXC_MAX_VIRTUAL_INTS)
-
-/*
- * @name Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE SZ_128M
-
-/*
- * PBC Controller parameters
- */
-
-/*
- * Base address of PBC controller, CS4
- */
-#define PBC_BASE_ADDRESS 0xf4300000
-#define PBC_REG_ADDR(offset) (void __force __iomem *) \
- (PBC_BASE_ADDRESS + (offset))
-
-/*
- * PBC Interupt name definitions
- */
-#define PBC_GPIO1_0 0
-#define PBC_GPIO1_1 1
-#define PBC_GPIO1_2 2
-#define PBC_GPIO1_3 3
-#define PBC_GPIO1_4 4
-#define PBC_GPIO1_5 5
-
-#define PBC_INTR_MAX_NUM 6
-#define PBC_INTR_SHARED_MAX_NUM 8
-
-/* When the PBC address connection is fixed in h/w, defined as 1 */
-#define PBC_ADDR_SH 0
-
-/* Offsets for the PBC Controller register */
-/*
- * PBC Board version register offset
- */
-#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 set address.
- */
-#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 clear address.
- */
-#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
-/*
- * PBC Board control register 2 set address.
- */
-#define PBC_BCTRL2_SET_REG PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 2 clear address.
- */
-#define PBC_BCTRL2_CLEAR_REG PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 set address.
- */
-#define PBC_BCTRL3_SET_REG PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 clear address.
- */
-#define PBC_BCTRL3_CLEAR_REG PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 set address.
- */
-#define PBC_BCTRL4_SET_REG PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 4 clear address.
- */
-#define PBC_BCTRL4_CLEAR_REG PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH)
-/*PBC_ADDR_SH
- * PBC Board status register 1.
- */
-#define PBC_BSTAT1_REG PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH)
-/*
- * PBC Board interrupt status register.
- */
-#define PBC_INTSTATUS_REG PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH)
-/*
- * PBC Board interrupt current status register.
- */
-#define PBC_INTCURR_STATUS_REG PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH)
-/*
- * PBC Interrupt mask register set address.
- */
-#define PBC_INTMASK_SET_REG PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH)
-/*
- * PBC Interrupt mask register clear address.
- */
-#define PBC_INTMASK_CLEAR_REG PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH)
-/*
- * External UART A.
- */
-#define PBC_SC16C652_UARTA_REG PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Status.
- */
-#define PBC_UART_STATUS_REG PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Control Set.
- */
-#define PBC_UCTRL_SET_REG PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Control Clear.
- */
-#define PBC_UCTRL_CLR_REG PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller IO base address.
- */
-#define PBC_CS8900A_IOBASE_REG PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller Memory base address.
- */
-#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller DMA base address.
- */
-#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH)
-
-/* PBC Board Version Register bit definition */
-#define PBC_VERSION_ADS 0x8000 /* Bit15=1 means version for ads */
-#define PBC_VERSION_EVB_REVB 0x4000 /* BIT14=1 means version for evb revb */
-
-/* PBC Board Control Register 1 bit definitions */
-#define PBC_BCTRL1_ERST 0x0001 /* Ethernet Reset */
-#define PBC_BCTRL1_URST 0x0002 /* Reset External UART controller */
-#define PBC_BCTRL1_FRST 0x0004 /* FEC Reset */
-#define PBC_BCTRL1_ESLEEP 0x0010 /* Enable ethernet Sleep */
-#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */
-
-/* PBC Board Control Register 2 bit definitions */
-#define PBC_BCTRL2_VCC_EN 0x0004 /* Enable VCC */
-#define PBC_BCTRL2_VPP_EN 0x0008 /* Enable Vpp */
-#define PBC_BCTRL2_ATAFEC_EN 0X0010
-#define PBC_BCTRL2_ATAFEC_SEL 0X0020
-#define PBC_BCTRL2_ATA_EN 0X0040
-#define PBC_BCTRL2_IRDA_SD 0X0080
-#define PBC_BCTRL2_IRDA_EN 0X0100
-#define PBC_BCTRL2_CCTL10 0X0200
-#define PBC_BCTRL2_CCTL11 0X0400
-
-/* PBC Board Control Register 3 bit definitions */
-#define PBC_BCTRL3_HSH_EN 0X0020
-#define PBC_BCTRL3_FSH_MOD 0X0040
-#define PBC_BCTRL3_OTG_HS_EN 0X0080
-#define PBC_BCTRL3_OTG_VBUS_EN 0X0100
-#define PBC_BCTRL3_FSH_VBUS_EN 0X0200
-#define PBC_BCTRL3_USB_OTG_ON 0X0800
-#define PBC_BCTRL3_USB_FSH_ON 0X1000
-
-/* PBC Board Control Register 4 bit definitions */
-#define PBC_BCTRL4_REGEN_SEL 0X0001
-#define PBC_BCTRL4_USER_OFF 0X0002
-#define PBC_BCTRL4_VIB_EN 0X0004
-#define PBC_BCTRL4_PWRGT1_EN 0X0008
-#define PBC_BCTRL4_PWRGT2_EN 0X0010
-#define PBC_BCTRL4_STDBY_PRI 0X0020
-
-#ifndef __ASSEMBLY__
-/*
- * Enumerations for SD cards and memory stick card. This corresponds to
- * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN.
- */
-enum mxc_card_no {
- MXC_CARD_SD2 = 0,
- MXC_CARD_SD3,
- MXC_CARD_MS,
- MXC_CARD_SD1,
- MXC_CARD_MIN = MXC_CARD_SD2,
- MXC_CARD_MAX = MXC_CARD_SD1,
-};
-#endif
-
-#define MXC_CPLD_VER_1_50 0x01
-
-/*
- * PBC BSTAT Register bit definitions
- */
-#define PBC_BSTAT_PRI_INT 0X0001
-#define PBC_BSTAT_USB_BYP 0X0002
-#define PBC_BSTAT_ATA_IOCS16 0X0004
-#define PBC_BSTAT_ATA_CBLID 0X0008
-#define PBC_BSTAT_ATA_DASP 0X0010
-#define PBC_BSTAT_PWR_RDY 0X0020
-#define PBC_BSTAT_SD3_WP 0X0100
-#define PBC_BSTAT_SD2_WP 0X0200
-#define PBC_BSTAT_SD1_WP 0X0400
-#define PBC_BSTAT_SD3_DET 0X0800
-#define PBC_BSTAT_SD2_DET 0X1000
-#define PBC_BSTAT_SD1_DET 0X2000
-#define PBC_BSTAT_MS_DET 0X4000
-#define PBC_BSTAT_SD3_DET_BIT 11
-#define PBC_BSTAT_SD2_DET_BIT 12
-#define PBC_BSTAT_SD1_DET_BIT 13
-#define PBC_BSTAT_MS_DET_BIT 14
-#define MXC_BSTAT_BIT(n) ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \
- ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \
- ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \
- ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \
- 0x0))))
-
-/*
- * PBC UART Control Register bit definitions
- */
-#define PBC_UCTRL_DCE_DCD 0X0001
-#define PBC_UCTRL_DCE_DSR 0X0002
-#define PBC_UCTRL_DCE_RI 0X0004
-#define PBC_UCTRL_DTE_DTR 0X0100
-
-/*
- * PBC UART Status Register bit definitions
- */
-#define PBC_USTAT_DTE_DCD 0X0001
-#define PBC_USTAT_DTE_DSR 0X0002
-#define PBC_USTAT_DTE_RI 0X0004
-#define PBC_USTAT_DCE_DTR 0X0100
-
-/*
- * PBC Interupt mask register bit definitions
- */
-#define PBC_INTR_SD3_R_EN_BIT 4
-#define PBC_INTR_SD2_R_EN_BIT 0
-#define PBC_INTR_SD1_R_EN_BIT 6
-#define PBC_INTR_MS_R_EN_BIT 5
-#define PBC_INTR_SD3_EN_BIT 13
-#define PBC_INTR_SD2_EN_BIT 12
-#define PBC_INTR_MS_EN_BIT 14
-#define PBC_INTR_SD1_EN_BIT 15
-
-#define PBC_INTR_SD2_R_EN 0x0001
-#define PBC_INTR_LOW_BAT 0X0002
-#define PBC_INTR_OTG_FSOVER 0X0004
-#define PBC_INTR_FSH_OVER 0X0008
-#define PBC_INTR_SD3_R_EN 0x0010
-#define PBC_INTR_MS_R_EN 0x0020
-#define PBC_INTR_SD1_R_EN 0x0040
-#define PBC_INTR_FEC_INT 0X0080
-#define PBC_INTR_ENET_INT 0X0100
-#define PBC_INTR_OTGFS_INT 0X0200
-#define PBC_INTR_XUART_INT 0X0400
-#define PBC_INTR_CCTL12 0X0800
-#define PBC_INTR_SD2_EN 0x1000
-#define PBC_INTR_SD3_EN 0x2000
-#define PBC_INTR_MS_EN 0x4000
-#define PBC_INTR_SD1_EN 0x8000
-
-
-
-/* For interrupts like xuart, enet etc */
-#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX27_PIN_TIN)
-#define MXC_MAX_EXP_IO_LINES 16
-
-/*
- * This corresponds to PBC_INTMASK_SET_REG at offset 0x38.
- *
- */
-#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_FEC (MXC_EXP_IO_BASE + 7)
-#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_CCTL12_INT (MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SD2_EN (MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_SD3_EN (MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_MS_EN (MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_SD1_EN (MXC_EXP_IO_BASE + 15)
-
-/*
- * This is System IRQ used by CS8900A for interrupt generation
- * taken from platform.h
- */
-#define CS8900AIRQ EXPIO_INT_ENET_INT
-/* This is I/O Base address used to access registers of CS8900A on MXC ADS */
-#define CS8900A_BASE_ADDRESS (PBC_CS8900A_IOBASE_REG + 0x300)
-
-#define MXC_PMIC_INT_LINE IOMUX_TO_IRQ(MX27_PIN_TOUT)
-
-/*
-* This is used to detect if the CPLD version is for mx27 evb board rev-a
-*/
-#define PBC_CPLD_VERSION_IS_REVA() \
- ((__raw_readw(PBC_VERSION_REG) & \
- (PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\
- == 0)
-
-/* This is used to active or inactive ata signal in CPLD .
- * It is dependent with hardware
- */
-#define PBC_ATA_SIGNAL_ACTIVE() \
- __raw_writew( \
- PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
- PBC_BCTRL2_CLEAR_REG)
-
-#define PBC_ATA_SIGNAL_INACTIVE() \
- __raw_writew( \
- PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
- PBC_BCTRL2_SET_REG)
-
-#define MXC_BD_LED1 (1 << 5)
-#define MXC_BD_LED2 (1 << 6)
-#define MXC_BD_LED_ON(led) \
- __raw_writew(led, PBC_BCTRL1_SET_REG)
-#define MXC_BD_LED_OFF(led) \
- __raw_writew(led, PBC_BCTRL1_CLEAR_REG)
-
-/* to determine the correct external crystal reference */
-#define CKIH_27MHZ_BIT_SET (1 << 3)
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
deleted file mode 100644
index ea87551..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
-#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
deleted file mode 100644
index fec1bcf..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
deleted file mode 100644
index da92933..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
-
-/* Definitions for components on the Debug board */
-
-/* Base address of CPLD controller on the Debug board */
-#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(CS5_BASE_ADDR)
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR CS5_BASE_ADDR
-
-/* CPLD config and interrupt base address */
-#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000)
-
-/* LED switchs */
-#define CPLD_LED_REG (CPLD_ADDR + 0x00)
-/* buttons */
-#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08)
-/* status, interrupt */
-#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10)
-#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38)
-#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40)
-#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48)
-/* CPLD code version */
-#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58)
-/* module reset register */
-#define CPLD_MODULE_RESET_REG (CPLD_ADDR + 0x60)
-/* CPU ID and Personality ID */
-#define CPLD_MCU_BOARD_ID_REG (CPLD_ADDR + 0x68)
-
-/* CPLD IRQ line for external uart, external ethernet etc */
-#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-
-#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_XUART_A (MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_XUART_B (MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_BUTTON_A (MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_BUTTON_B (MXC_EXP_IO_BASE + 4)
-
-#define MXC_MAX_EXP_IO_LINES 16
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
deleted file mode 100644
index 095a199..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
-
-#include <mach/hardware.h>
-
-/* Base address of PBC controller */
-#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
-/* Offsets for the PBC Controller register */
-
-/* PBC Board status register offset */
-#define PBC_BSTAT 0x000002
-
-/* PBC Board control register 1 set address */
-#define PBC_BCTRL1_SET 0x000004
-
-/* PBC Board control register 1 clear address */
-#define PBC_BCTRL1_CLEAR 0x000006
-
-/* PBC Board control register 2 set address */
-#define PBC_BCTRL2_SET 0x000008
-
-/* PBC Board control register 2 clear address */
-#define PBC_BCTRL2_CLEAR 0x00000A
-
-/* PBC Board control register 3 set address */
-#define PBC_BCTRL3_SET 0x00000C
-
-/* PBC Board control register 3 clear address */
-#define PBC_BCTRL3_CLEAR 0x00000E
-
-/* PBC Board control register 4 set address */
-#define PBC_BCTRL4_SET 0x000010
-
-/* PBC Board control register 4 clear address */
-#define PBC_BCTRL4_CLEAR 0x000012
-
-/* PBC Board status register 1 */
-#define PBC_BSTAT1 0x000014
-
-/* PBC Board interrupt status register */
-#define PBC_INTSTATUS 0x000016
-
-/* PBC Board interrupt current status register */
-#define PBC_INTCURR_STATUS 0x000018
-
-/* PBC Interrupt mask register set address */
-#define PBC_INTMASK_SET 0x00001A
-
-/* PBC Interrupt mask register clear address */
-#define PBC_INTMASK_CLEAR 0x00001C
-
-/* External UART A */
-#define PBC_SC16C652_UARTA 0x010000
-
-/* External UART B */
-#define PBC_SC16C652_UARTB 0x010010
-
-/* Ethernet Controller IO base address */
-#define PBC_CS8900A_IOBASE 0x020000
-
-/* Ethernet Controller Memory base address */
-#define PBC_CS8900A_MEMBASE 0x021000
-
-/* Ethernet Controller DMA base address */
-#define PBC_CS8900A_DMABASE 0x022000
-
-/* External chip select 0 */
-#define PBC_XCS0 0x040000
-
-/* LCD Display enable */
-#define PBC_LCD_EN_B 0x060000
-
-/* Code test debug enable */
-#define PBC_CODE_B 0x070000
-
-/* PSRAM memory select */
-#define PBC_PSRAM_B 0x5000000
-
-#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS)
-#define PBC_INTCURR_STATUS_REG (PBC_INTCURR_STATUS + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-
-#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_PB_IRQ (MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_RES7 (MXC_EXP_IO_BASE + 7)
-#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SYNTH_IRQ (MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_CE_INT1 (MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_CE_INT2 (MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_RES15 (MXC_EXP_IO_BASE + 15)
-
-#define MXC_MAX_EXP_IO_LINES 16
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
index eb5a502..0df71bf 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -31,7 +31,7 @@
/*
* This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
*/
extern void mx31lilly_db_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 2b2da03..c1ad0ae8 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -32,7 +32,7 @@
/*
* This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
*/
extern void mx31lite_db_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index 36ff3ce..de14543 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -31,7 +31,7 @@
/*
* This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
*/
extern void mx31moboard_devboard_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
deleted file mode 100644
index 383f1c0..0000000
--- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
deleted file mode 100644
index 1341170..0000000
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
-#define __ASM_ARCH_MXC_BOARD_PCM037_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 410f978..6f371e3 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -22,7 +22,7 @@
#ifndef __ASSEMBLY__
/*
* This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
* TODO: Add your own baseboard init function and call it from
* inside pcm038_init().
*
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
deleted file mode 100644
index 1ac4e16..0000000
--- a/arch/arm/plat-mxc/include/mach/board-pcm043.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
-#define __ASM_ARCH_MXC_BOARD_PCM043_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
deleted file mode 100644
index 6d88c7a..0000000
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
-#define __ASM_ARCH_MXC_BOARD_QONG_H__
-
-/* NOR FLASH */
-#define QONG_NOR_SIZE (128*1024*1024)
-
-#endif /* __ASM_ARCH_MXC_BOARD_QONG_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
new file mode 100644
index 0000000..05c8d3f
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+
+struct platform_device *imx_add_platform_device(const char *name, int id,
+ const struct resource *res, unsigned int num_resources,
+ const void *data, size_t size_data);
+
+#include <mach/i2c.h>
+struct platform_device *__init imx_add_imx_i2c(int id,
+ resource_size_t iobase, resource_size_t iosize, int irq,
+ const struct imxi2c_platform_data *pdata);
+
+#include <mach/imx-uart.h>
+struct platform_device *__init imx_add_imx_uart_3irq(int id,
+ resource_size_t iobase, resource_size_t iosize,
+ resource_size_t irqrx, resource_size_t irqtx,
+ resource_size_t irqrts,
+ const struct imxuart_platform_data *pdata);
+struct platform_device *__init imx_add_imx_uart_1irq(int id,
+ resource_size_t iobase, resource_size_t iosize,
+ resource_size_t irq,
+ const struct imxuart_platform_data *pdata);
+
+#include <mach/mxc_nand.h>
+struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase,
+ int irq, const struct mxc_nand_platform_data *pdata);
+struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase,
+ int irq, const struct mxc_nand_platform_data *pdata);
+
+#include <mach/spi.h>
+struct platform_device *__init imx_add_spi_imx(int id,
+ resource_size_t iobase, resource_size_t iosize, int irq,
+ const struct spi_imx_master *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
index 3887f3f..15d5951 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __MACH_IOMUX_MXC91231_H__
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 5eba7e6..641b246 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -91,24 +91,24 @@
#define MX1_SIM_DATA_INT 16
#define MX1_RTC_INT 17
#define MX1_RTC_SAMINT 18
-#define MX1_UART2_MINT_PFERR 19
-#define MX1_UART2_MINT_RTS 20
-#define MX1_UART2_MINT_DTR 21
-#define MX1_UART2_MINT_UARTC 22
-#define MX1_UART2_MINT_TX 23
-#define MX1_UART2_MINT_RX 24
-#define MX1_UART1_MINT_PFERR 25
-#define MX1_UART1_MINT_RTS 26
-#define MX1_UART1_MINT_DTR 27
-#define MX1_UART1_MINT_UARTC 28
-#define MX1_UART1_MINT_TX 29
-#define MX1_UART1_MINT_RX 30
+#define MX1_INT_UART2PFERR 19
+#define MX1_INT_UART2RTS 20
+#define MX1_INT_UART2DTR 21
+#define MX1_INT_UART2UARTC 22
+#define MX1_INT_UART2TX 23
+#define MX1_INT_UART2RX 24
+#define MX1_INT_UART1PFERR 25
+#define MX1_INT_UART1RTS 26
+#define MX1_INT_UART1DTR 27
+#define MX1_INT_UART1UARTC 28
+#define MX1_INT_UART1TX 29
+#define MX1_INT_UART1RX 30
#define MX1_VOICE_DAC_INT 31
#define MX1_VOICE_ADC_INT 32
#define MX1_PEN_DATA_INT 33
#define MX1_PWM_INT 34
#define MX1_SDHC_INT 35
-#define MX1_I2C_INT 39
+#define MX1_INT_I2C 39
#define MX1_CSPI_INT 41
#define MX1_SSI_TX_INT 42
#define MX1_SSI_TX_ERR_INT 43
@@ -245,7 +245,7 @@
#define PEN_DATA_INT MX1_PEN_DATA_INT
#define PWM_INT MX1_PWM_INT
#define SDHC_INT MX1_SDHC_INT
-#define I2C_INT MX1_I2C_INT
+#define I2C_INT MX1_INT_I2C
#define CSPI_INT MX1_CSPI_INT
#define SSI_TX_INT MX1_SSI_TX_INT
#define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 7516f29..2f2aad1 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -11,6 +11,10 @@
#define MX25_AVIC_BASE_ADDR_VIRT 0xfc400000
#define MX25_AVIC_SIZE SZ_1M
+#define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000)
+#define MX25_I2C3_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x84000)
+#define MX25_I2C2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x98000)
+#define MX25_CSPI1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xa4000)
#define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000)
#define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000)
@@ -30,7 +34,12 @@
#define MX25_UART1_BASE_ADDR 0x43f90000
#define MX25_UART2_BASE_ADDR 0x43f94000
#define MX25_AUDMUX_BASE_ADDR 0x43fb0000
+#define MX25_UART3_BASE_ADDR 0x5000c000
+#define MX25_UART4_BASE_ADDR 0x50008000
+#define MX25_UART5_BASE_ADDR 0x5002c000
+#define MX25_CSPI3_BASE_ADDR 0x50004000
+#define MX25_CSPI2_BASE_ADDR 0x50010000
#define MX25_FEC_BASE_ADDR 0x50038000
#define MX25_SSI2_BASE_ADDR 0x50014000
#define MX25_SSI1_BASE_ADDR 0x50034000
@@ -41,14 +50,25 @@
#define MX25_OTG_BASE_ADDR 0x53ff4000
#define MX25_CSI_BASE_ADDR 0x53ff8000
-#define MX25_INT_SSI2 11
-#define MX25_INT_SSI1 12
-#define MX25_INT_CSI 17
-#define MX25_INT_DRYICE 25
-#define MX25_INT_NANDFC 33
-#define MX25_INT_LCDC 39
-#define MX25_INT_KPP 24
-#define MX25_INT_FEC 57
+#define MX25_INT_CSPI3 0
+#define MX25_INT_I2C1 3
+#define MX25_INT_I2C2 4
+#define MX25_INT_UART4 5
+#define MX25_INT_I2C3 10
+#define MX25_INT_SSI2 11
+#define MX25_INT_SSI1 12
+#define MX25_INT_CSPI2 13
+#define MX25_INT_CSPI1 14
+#define MX25_INT_CSI 17
+#define MX25_INT_UART3 18
+#define MX25_INT_KPP 24
+#define MX25_INT_DRYICE 25
+#define MX25_INT_UART2 32
+#define MX25_INT_NANDFC 33
+#define MX25_INT_LCDC 39
+#define MX25_INT_UART5 40
+#define MX25_INT_UART1 45
+#define MX25_INT_FEC 57
#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS)
#define UART1_BASE_ADDR MX25_UART1_BASE_ADDR
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index bae9cd7..a8ab2e0 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -48,7 +48,7 @@
#define MX27_CSPI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0f000)
#define MX27_SSI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x10000)
#define MX27_SSI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x11000)
-#define MX27_I2C_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000)
+#define MX27_I2C1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000)
#define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000)
#define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000)
#define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000)
@@ -150,7 +150,7 @@
#define MX27_INT_SDHC3 9
#define MX27_INT_SDHC2 10
#define MX27_INT_SDHC1 11
-#define MX27_INT_I2C 12
+#define MX27_INT_I2C1 12
#define MX27_INT_SSI2 13
#define MX27_INT_SSI1 14
#define MX27_INT_CSPI2 15
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index fb90e11..afee3ab 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -23,7 +23,7 @@
#define MX31_ETB_SLOT4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x10000)
#define MX31_ETB_SLOT5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x14000)
#define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000)
-#define MX31_I2C_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000)
+#define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000)
#define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000)
#define MX31_OTG_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000)
#define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000)
@@ -145,7 +145,7 @@
#define MX31_INT_FIRI 7
#define MX31_INT_MMC_SDHC2 8
#define MX31_INT_MMC_SDHC1 9
-#define MX31_INT_I2C 10
+#define MX31_INT_I2C1 10
#define MX31_INT_SSI2 11
#define MX31_INT_SSI1 12
#define MX31_INT_CSPI2 13
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 526a558..cda60c7 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -18,7 +18,7 @@
#define MX35_ETB_SLOT4_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x10000)
#define MX35_ETB_SLOT5_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x14000)
#define MX35_ECT_CTIO_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x18000)
-#define MX35_I2C_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000)
+#define MX35_I2C1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000)
#define MX35_I2C3_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x84000)
#define MX35_UART1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x90000)
#define MX35_UART2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x94000)
@@ -123,7 +123,7 @@
#define MX35_INT_MMC_SDHC1 7
#define MX35_INT_MMC_SDHC2 8
#define MX35_INT_MMC_SDHC3 9
-#define MX35_INT_I2C 10
+#define MX35_INT_I2C1 10
#define MX35_INT_SSI1 11
#define MX35_INT_SSI2 12
#define MX35_INT_CSPI2 13
diff --git a/arch/arm/plat-mxc/include/mach/mx3_camera.h b/arch/arm/plat-mxc/include/mach/mx3_camera.h
index 36d7ff2..f226ee3 100644
--- a/arch/arm/plat-mxc/include/mach/mx3_camera.h
+++ b/arch/arm/plat-mxc/include/mach/mx3_camera.h
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _MX3_CAMERA_H_
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
index 5182b98..0ca3101 100644
--- a/arch/arm/plat-mxc/include/mach/mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __MACH_MXC91231_H__
#define __MACH_MXC91231_H__
diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h
index 2d74748..04c0d06 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_nand.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h
@@ -23,9 +23,9 @@
#include <linux/mtd/partitions.h>
struct mxc_nand_platform_data {
- int width; /* data bus width in bytes */
- int hw_ecc:1; /* 0 if supress hardware ECC */
- int flash_bbt:1; /* set to 1 to use a flash based bbt */
+ unsigned int width; /* data bus width in bytes */
+ unsigned int hw_ecc:1; /* 0 if supress hardware ECC */
+ unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
struct mtd_partition *parts; /* partition table */
int nr_parts; /* size of parts */
};
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index ef00199..4acd114 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MXC_SYSTEM_H__
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 024416e..2d96246 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MXC_TIMEX_H__
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index b6d3d0f..d9bd37e 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
#define __ASM_ARCH_MXC_UNCOMPRESS_H__
diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
index 44243a2..ef6379c 100644
--- a/arch/arm/plat-mxc/include/mach/vmalloc.h
+++ b/arch/arm/plat-mxc/include/mach/vmalloc.h
@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MXC_VMALLOC_H__
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 778ddfe..7331f2a 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -142,9 +142,6 @@
for (i = 0; i < 8; i++)
__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
- /* init architectures chained interrupt handler */
- mxc_register_gpios();
-
#ifdef CONFIG_FIQ
/* Initialize FIQ */
init_FIQ();
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 97f4279..925bce4 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -14,10 +14,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index 9b86d2a..b3da9aa 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -145,8 +145,6 @@
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
- mxc_register_gpios();
-
pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
}
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index dc2ac42..393e921 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -624,79 +624,58 @@
__raw_writel(l, base + reg); \
} while(0)
-void omap_set_gpio_debounce(int gpio, int enable)
+/**
+ * _set_gpio_debounce - low level gpio debounce time
+ * @bank: the gpio bank we're acting upon
+ * @gpio: the gpio number on this @gpio
+ * @debounce: debounce time to use
+ *
+ * OMAP's debounce time is in 31us steps so we need
+ * to convert and round up to the closest unit.
+ */
+static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
+ unsigned debounce)
{
- struct gpio_bank *bank;
- void __iomem *reg;
- unsigned long flags;
- u32 val, l = 1 << get_gpio_index(gpio);
+ void __iomem *reg = bank->base;
+ u32 val;
+ u32 l;
- if (cpu_class_is_omap1())
- return;
-
- bank = get_gpio_bank(gpio);
- reg = bank->base;
-
- if (cpu_is_omap44xx())
- reg += OMAP4_GPIO_DEBOUNCENABLE;
+ if (debounce < 32)
+ debounce = 0x01;
+ else if (debounce > 7936)
+ debounce = 0xff;
else
- reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+ debounce = (debounce / 0x1f) - 1;
- if (!(bank->mod_usage & l)) {
- printk(KERN_ERR "GPIO %d not requested\n", gpio);
- return;
- }
-
- spin_lock_irqsave(&bank->lock, flags);
- val = __raw_readl(reg);
-
- if (enable && !(val & l))
- val |= l;
- else if (!enable && (val & l))
- val &= ~l;
- else
- goto done;
-
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- bank->dbck_enable_mask = val;
- if (enable)
- clk_enable(bank->dbck);
- else
- clk_disable(bank->dbck);
- }
-
- __raw_writel(val, reg);
-done:
- spin_unlock_irqrestore(&bank->lock, flags);
-}
-EXPORT_SYMBOL(omap_set_gpio_debounce);
-
-void omap_set_gpio_debounce_time(int gpio, int enc_time)
-{
- struct gpio_bank *bank;
- void __iomem *reg;
-
- if (cpu_class_is_omap1())
- return;
-
- bank = get_gpio_bank(gpio);
- reg = bank->base;
-
- if (!bank->mod_usage) {
- printk(KERN_ERR "GPIO not requested\n");
- return;
- }
-
- enc_time &= 0xff;
+ l = 1 << get_gpio_index(gpio);
if (cpu_is_omap44xx())
reg += OMAP4_GPIO_DEBOUNCINGTIME;
else
reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
- __raw_writel(enc_time, reg);
+ __raw_writel(debounce, reg);
+
+ reg = bank->base;
+ if (cpu_is_omap44xx())
+ reg += OMAP4_GPIO_DEBOUNCENABLE;
+ else
+ reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+
+ val = __raw_readl(reg);
+
+ if (debounce) {
+ val |= l;
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
+ clk_enable(bank->dbck);
+ } else {
+ val &= ~l;
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
+ clk_disable(bank->dbck);
+ }
+
+ __raw_writel(val, reg);
}
-EXPORT_SYMBOL(omap_set_gpio_debounce_time);
#ifdef CONFIG_ARCH_OMAP2PLUS
static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
@@ -1656,6 +1635,20 @@
return 0;
}
+static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
+ unsigned debounce)
+{
+ struct gpio_bank *bank;
+ unsigned long flags;
+
+ bank = container_of(chip, struct gpio_bank, chip);
+ spin_lock_irqsave(&bank->lock, flags);
+ _set_gpio_debounce(bank, offset, debounce);
+ spin_unlock_irqrestore(&bank->lock, flags);
+
+ return 0;
+}
+
static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct gpio_bank *bank;
@@ -1909,6 +1902,7 @@
bank->chip.direction_input = gpio_input;
bank->chip.get = gpio_get;
bank->chip.direction_output = gpio_output;
+ bank->chip.set_debounce = gpio_debounce;
bank->chip.set = gpio_set;
bank->chip.to_irq = gpio_2irq;
if (bank_is_mpuio(bank)) {
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 5cb2dd1..11d6a1b 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -29,3 +29,4 @@
bool
help
Use the external interrupts (other than GPIO interrupts.)
+ Note: Do not choose this for S5P6440.
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index 24a931f..b5e2552 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -148,6 +148,7 @@
&clk_fout_vpll,
&clk_arm,
&clk_vpll,
+ &clk_xusbxti,
};
void __init s5p_register_clocks(unsigned long xtal_freq)
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
index 9ff3d71..3fb3a3a 100644
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -87,4 +87,11 @@
#define IRQ_TIMER3 S5P_TIMER_IRQ(3)
#define IRQ_TIMER4 S5P_TIMER_IRQ(4)
+#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \
+ : ((x) - 16 + S5P_EINT_BASE2))
+
+#define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \
+ ((irq) - S5P_EINT_BASE1) : \
+ ((irq) + 16 - S5P_EINT_BASE2))
+
#endif /* __ASM_PLAT_S5P_IRQS_H */
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
index eaa70aa..e56c807 100644
--- a/arch/arm/plat-s5p/irq-eint.c
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -60,7 +60,7 @@
static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
{
- int offs = eint_offset(irq);
+ int offs = EINT_OFFSET(irq);
int shift;
u32 ctrl, mask;
u32 newvalue = 0;
@@ -139,17 +139,16 @@
*/
static inline void s5p_irq_demux_eint(unsigned int start)
{
- u32 status;
+ u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
unsigned int irq;
- status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
status &= ~mask;
status &= 0xff;
while (status) {
- irq = fls(status);
- generic_handle_irq(irq - 1 + start);
+ irq = fls(status) - 1;
+ generic_handle_irq(irq + start);
status &= ~(1 << irq);
}
}
@@ -162,12 +161,18 @@
static inline void s5p_irq_vic_eint_mask(unsigned int irq)
{
+ void __iomem *base = get_irq_chip_data(irq);
+
s5p_irq_eint_mask(irq);
+ writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE_CLEAR);
}
static void s5p_irq_vic_eint_unmask(unsigned int irq)
{
+ void __iomem *base = get_irq_chip_data(irq);
+
s5p_irq_eint_unmask(irq);
+ writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE);
}
static inline void s5p_irq_vic_eint_ack(unsigned int irq)
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 34efdd2..db4112c 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -43,6 +43,11 @@
* layouts. Provide an point to vector control routine and provide any
* per-bank configuration information that other systems such as the
* external interrupt code will need.
+ *
+ * @sa s3c_gpio_cfgpin
+ * @sa s3c_gpio_getcfg
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_getpull
*/
struct s3c_gpio_cfg {
unsigned int cfg_eint;
@@ -70,11 +75,25 @@
/**
* s3c_gpio_cfgpin() - Change the GPIO function of a pin.
* @pin pin The pin number to configure.
- * @pin to The configuration for the pin's function.
+ * @to to The configuration for the pin's function.
*
* Configure which function is actually connected to the external
* pin, such as an gpio input, output or some form of special function
* connected to an internal peripheral block.
+ *
+ * The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT
+ * or S3C_GPIO_SFN() to indicate one of the possible values that the helper
+ * will then generate the correct bit mask and shift for the configuration.
+ *
+ * If a bank of GPIOs all needs to be set to special-function 2, then
+ * the following code will work:
+ *
+ * for (gpio = start; gpio < end; gpio++)
+ * s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ *
+ * The @to parameter can also be a specific value already shifted to the
+ * correct position in the control register, although these are discouraged
+ * in newer kernels and are only being kept for compatibility.
*/
extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
@@ -108,6 +127,8 @@
* This function sets the state of the pull-{up,down} resistor for the
* specified pin. It will return 0 if successfull, or a negative error
* code if the pin cannot support the requested pull setting.
+ *
+ * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
*/
extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);