|  | /* | 
|  | * June 2006 Steve Glendinning <steve.glendinning@shawell.net> | 
|  | * | 
|  | * Polaris-specific resource declaration | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/regulator/fixed.h> | 
|  | #include <linux/regulator/machine.h> | 
|  | #include <linux/smsc911x.h> | 
|  | #include <linux/io.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/machvec.h> | 
|  | #include <asm/heartbeat.h> | 
|  | #include <cpu/gpio.h> | 
|  | #include <mach-se/mach/se.h> | 
|  |  | 
|  | #define BCR2		(0xFFFFFF62) | 
|  | #define WCR2		(0xFFFFFF66) | 
|  | #define AREA5_WAIT_CTRL	(0x1C00) | 
|  | #define WAIT_STATES_10	(0x7) | 
|  |  | 
|  | /* Dummy supplies, where voltage doesn't matter */ | 
|  | static struct regulator_consumer_supply dummy_supplies[] = { | 
|  | REGULATOR_SUPPLY("vddvario", "smsc911x.0"), | 
|  | REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), | 
|  | }; | 
|  |  | 
|  | static struct resource smsc911x_resources[] = { | 
|  | [0] = { | 
|  | .name		= "smsc911x-memory", | 
|  | .start		= PA_EXT5, | 
|  | .end		= PA_EXT5 + 0x1fff, | 
|  | .flags		= IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .name		= "smsc911x-irq", | 
|  | .start		= IRQ0_IRQ, | 
|  | .end		= IRQ0_IRQ, | 
|  | .flags		= IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct smsc911x_platform_config smsc911x_config = { | 
|  | .irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW, | 
|  | .irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN, | 
|  | .flags		= SMSC911X_USE_32BIT, | 
|  | .phy_interface	= PHY_INTERFACE_MODE_MII, | 
|  | }; | 
|  |  | 
|  | static struct platform_device smsc911x_device = { | 
|  | .name		= "smsc911x", | 
|  | .id		= 0, | 
|  | .num_resources	= ARRAY_SIZE(smsc911x_resources), | 
|  | .resource	= smsc911x_resources, | 
|  | .dev = { | 
|  | .platform_data = &smsc911x_config, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 }; | 
|  |  | 
|  | static struct heartbeat_data heartbeat_data = { | 
|  | .bit_pos	= heartbeat_bit_pos, | 
|  | .nr_bits	= ARRAY_SIZE(heartbeat_bit_pos), | 
|  | }; | 
|  |  | 
|  | static struct resource heartbeat_resource = { | 
|  | .start	= PORT_PCDR, | 
|  | .end	= PORT_PCDR, | 
|  | .flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT, | 
|  | }; | 
|  |  | 
|  | static struct platform_device heartbeat_device = { | 
|  | .name		= "heartbeat", | 
|  | .id		= -1, | 
|  | .dev	= { | 
|  | .platform_data	= &heartbeat_data, | 
|  | }, | 
|  | .num_resources	= 1, | 
|  | .resource	= &heartbeat_resource, | 
|  | }; | 
|  |  | 
|  | static struct platform_device *polaris_devices[] __initdata = { | 
|  | &smsc911x_device, | 
|  | &heartbeat_device, | 
|  | }; | 
|  |  | 
|  | static int __init polaris_initialise(void) | 
|  | { | 
|  | u16 wcr, bcr_mask; | 
|  |  | 
|  | printk(KERN_INFO "Configuring Polaris external bus\n"); | 
|  |  | 
|  | regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); | 
|  |  | 
|  | /* Configure area 5 with 2 wait states */ | 
|  | wcr = __raw_readw(WCR2); | 
|  | wcr &= (~AREA5_WAIT_CTRL); | 
|  | wcr |= (WAIT_STATES_10 << 10); | 
|  | __raw_writew(wcr, WCR2); | 
|  |  | 
|  | /* Configure area 5 for 32-bit access */ | 
|  | bcr_mask = __raw_readw(BCR2); | 
|  | bcr_mask |= 1 << 10; | 
|  | __raw_writew(bcr_mask, BCR2); | 
|  |  | 
|  | return platform_add_devices(polaris_devices, | 
|  | ARRAY_SIZE(polaris_devices)); | 
|  | } | 
|  | arch_initcall(polaris_initialise); | 
|  |  | 
|  | static struct ipr_data ipr_irq_table[] = { | 
|  | /* External IRQs */ | 
|  | { IRQ0_IRQ, 0,  0,  1, },	/* IRQ0 */ | 
|  | { IRQ1_IRQ, 0,  4,  1, },	/* IRQ1 */ | 
|  | }; | 
|  |  | 
|  | static unsigned long ipr_offsets[] = { | 
|  | INTC_IPRC | 
|  | }; | 
|  |  | 
|  | static struct ipr_desc ipr_irq_desc = { | 
|  | .ipr_offsets	= ipr_offsets, | 
|  | .nr_offsets	= ARRAY_SIZE(ipr_offsets), | 
|  |  | 
|  | .ipr_data	= ipr_irq_table, | 
|  | .nr_irqs	= ARRAY_SIZE(ipr_irq_table), | 
|  | .chip = { | 
|  | .name	= "sh7709-ext", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static void __init init_polaris_irq(void) | 
|  | { | 
|  | /* Disable all interrupts */ | 
|  | __raw_writew(0, BCR_ILCRA); | 
|  | __raw_writew(0, BCR_ILCRB); | 
|  | __raw_writew(0, BCR_ILCRC); | 
|  | __raw_writew(0, BCR_ILCRD); | 
|  | __raw_writew(0, BCR_ILCRE); | 
|  | __raw_writew(0, BCR_ILCRF); | 
|  | __raw_writew(0, BCR_ILCRG); | 
|  |  | 
|  | register_ipr_controller(&ipr_irq_desc); | 
|  | } | 
|  |  | 
|  | static struct sh_machine_vector mv_polaris __initmv = { | 
|  | .mv_name		= "Polaris", | 
|  | .mv_init_irq		= init_polaris_irq, | 
|  | }; |