|  | /* | 
|  | * linux/arch/sh/boards/superh/microdev/io.c | 
|  | * | 
|  | * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) | 
|  | * Copyright (C) 2003, 2004 SuperH, Inc. | 
|  | * Copyright (C) 2004 Paul Mundt | 
|  | * | 
|  | * SuperH SH4-202 MicroDev board support. | 
|  | * | 
|  | * May be copied or modified under the terms of the GNU General Public | 
|  | * License.  See linux/COPYING for more information. | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/wait.h> | 
|  | #include <asm/io.h> | 
|  | #include <mach/microdev.h> | 
|  |  | 
|  | /* | 
|  | *	we need to have a 'safe' address to re-direct all I/O requests | 
|  | *	that we do not explicitly wish to handle. This safe address | 
|  | *	must have the following properies: | 
|  | * | 
|  | *		* writes are ignored (no exception) | 
|  | *		* reads are benign (no side-effects) | 
|  | *		* accesses of width 1, 2 and 4-bytes are all valid. | 
|  | * | 
|  | *	The Processor Version Register (PVR) has these properties. | 
|  | */ | 
|  | #define	PVR	0xff000030	/* Processor Version Register */ | 
|  |  | 
|  |  | 
|  | #define	IO_IDE2_BASE		0x170ul	/* I/O base for SMSC FDC37C93xAPM IDE #2 */ | 
|  | #define	IO_IDE1_BASE		0x1f0ul	/* I/O base for SMSC FDC37C93xAPM IDE #1 */ | 
|  | #define IO_ISP1161_BASE		0x290ul /* I/O port for Philips ISP1161x USB chip */ | 
|  | #define IO_SERIAL2_BASE		0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */ | 
|  | #define	IO_LAN91C111_BASE	0x300ul	/* I/O base for SMSC LAN91C111 Ethernet chip */ | 
|  | #define	IO_IDE2_MISC		0x376ul	/* I/O misc for SMSC FDC37C93xAPM IDE #2 */ | 
|  | #define IO_SUPERIO_BASE		0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */ | 
|  | #define	IO_IDE1_MISC		0x3f6ul	/* I/O misc for SMSC FDC37C93xAPM IDE #1 */ | 
|  | #define IO_SERIAL1_BASE		0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */ | 
|  |  | 
|  | #define	IO_ISP1161_EXTENT	0x04ul	/* I/O extent for Philips ISP1161x USB chip */ | 
|  | #define	IO_LAN91C111_EXTENT	0x10ul	/* I/O extent for SMSC LAN91C111 Ethernet chip */ | 
|  | #define	IO_SUPERIO_EXTENT	0x02ul	/* I/O extent for SMSC FDC37C93xAPM SuperIO chip */ | 
|  | #define	IO_IDE_EXTENT		0x08ul	/* I/O extent for IDE Task Register set */ | 
|  | #define IO_SERIAL_EXTENT	0x10ul | 
|  |  | 
|  | #define	IO_LAN91C111_PHYS	0xa7500000ul	/* Physical address of SMSC LAN91C111 Ethernet chip */ | 
|  | #define	IO_ISP1161_PHYS		0xa7700000ul	/* Physical address of Philips ISP1161x USB chip */ | 
|  | #define	IO_SUPERIO_PHYS		0xa7800000ul	/* Physical address of SMSC FDC37C93xAPM SuperIO chip */ | 
|  |  | 
|  | /* | 
|  | * map I/O ports to memory-mapped addresses | 
|  | */ | 
|  | void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len) | 
|  | { | 
|  | unsigned long result; | 
|  |  | 
|  | if ((offset >= IO_LAN91C111_BASE) && | 
|  | (offset <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { | 
|  | /* | 
|  | *	SMSC LAN91C111 Ethernet chip | 
|  | */ | 
|  | result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE; | 
|  | } else if ((offset >= IO_SUPERIO_BASE) && | 
|  | (offset <  IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) { | 
|  | /* | 
|  | *	SMSC FDC37C93xAPM SuperIO chip | 
|  | * | 
|  | *	Configuration Registers | 
|  | */ | 
|  | result = IO_SUPERIO_PHYS + (offset << 1); | 
|  | } else if (((offset >= IO_IDE1_BASE) && | 
|  | (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) || | 
|  | (offset == IO_IDE1_MISC)) { | 
|  | /* | 
|  | *	SMSC FDC37C93xAPM SuperIO chip | 
|  | * | 
|  | *	IDE #1 | 
|  | */ | 
|  | result = IO_SUPERIO_PHYS + (offset << 1); | 
|  | } else if (((offset >= IO_IDE2_BASE) && | 
|  | (offset <  IO_IDE2_BASE + IO_IDE_EXTENT)) || | 
|  | (offset == IO_IDE2_MISC)) { | 
|  | /* | 
|  | *	SMSC FDC37C93xAPM SuperIO chip | 
|  | * | 
|  | *	IDE #2 | 
|  | */ | 
|  | result = IO_SUPERIO_PHYS + (offset << 1); | 
|  | } else if ((offset >= IO_SERIAL1_BASE) && | 
|  | (offset <  IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) { | 
|  | /* | 
|  | *	SMSC FDC37C93xAPM SuperIO chip | 
|  | * | 
|  | *	Serial #1 | 
|  | */ | 
|  | result = IO_SUPERIO_PHYS + (offset << 1); | 
|  | } else if ((offset >= IO_SERIAL2_BASE) && | 
|  | (offset <  IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) { | 
|  | /* | 
|  | *	SMSC FDC37C93xAPM SuperIO chip | 
|  | * | 
|  | *	Serial #2 | 
|  | */ | 
|  | result = IO_SUPERIO_PHYS + (offset << 1); | 
|  | } else if ((offset >= IO_ISP1161_BASE) && | 
|  | (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) { | 
|  | /* | 
|  | *	Philips USB ISP1161x chip | 
|  | */ | 
|  | result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE; | 
|  | } else { | 
|  | /* | 
|  | *	safe default. | 
|  | */ | 
|  | printk("Warning: unexpected port in %s( offset = 0x%lx )\n", | 
|  | __func__, offset); | 
|  | result = PVR; | 
|  | } | 
|  |  | 
|  | return (void __iomem *)result; | 
|  | } |