ARM: imx: dynamically allocate mxc-ehci devices
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8e9297b..025e969 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -102,6 +102,7 @@
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
@@ -130,6 +131,7 @@
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select MXC_ULPI if USB_ULPI
@@ -183,6 +185,7 @@
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
+ select IMX_HAVE_PLATFORM_MXC_EHCI
help
Include support for Visstrim_m10 platform and its different variants.
This includes specific configurations for the board and its
@@ -202,6 +205,7 @@
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index 6466744..51b9155 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -43,6 +43,13 @@
#define imx27_add_mx2_camera(pdata) \
imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst;
+#define imx27_add_mxc_ehci_otg(pdata) \
+ imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst;
+#define imx27_add_mxc_ehci_hs(id, pdata) \
+ imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata)
+
extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst;
#define imx27_add_mxc_mmc(id, pdata) \
imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata)
diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c
index 7609e8a..2a6d707 100644
--- a/arch/arm/mach-imx/devices.c
+++ b/arch/arm/mach-imx/devices.c
@@ -79,12 +79,12 @@
#ifdef CONFIG_MACH_MX27
static struct resource otg_resources[] = {
{
- .start = MX27_USBOTG_BASE_ADDR,
- .end = MX27_USBOTG_BASE_ADDR + 0x1ff,
+ .start = MX27_USB_OTG_BASE_ADDR,
+ .end = MX27_USB_OTG_BASE_ADDR + 0x1ff,
.flags = IORESOURCE_MEM,
}, {
- .start = MX27_INT_USB3,
- .end = MX27_INT_USB3,
+ .start = MX27_INT_USB_OTG,
+ .end = MX27_INT_USB_OTG,
.flags = IORESOURCE_IRQ,
},
};
@@ -102,71 +102,6 @@
.resource = otg_resources,
.num_resources = ARRAY_SIZE(otg_resources),
};
-
-/* OTG host */
-struct platform_device mxc_otg_host = {
- .name = "mxc-ehci",
- .id = 0,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &otg_dmamask,
- },
- .resource = otg_resources,
- .num_resources = ARRAY_SIZE(otg_resources),
-};
-
-/* USB host 1 */
-
-static u64 usbh1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh1_resources[] = {
- {
- .start = MX27_USBOTG_BASE_ADDR + 0x200,
- .end = MX27_USBOTG_BASE_ADDR + 0x3ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX27_INT_USB1,
- .end = MX27_INT_USB1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh1 = {
- .name = "mxc-ehci",
- .id = 1,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &usbh1_dmamask,
- },
- .resource = mxc_usbh1_resources,
- .num_resources = ARRAY_SIZE(mxc_usbh1_resources),
-};
-
-/* USB host 2 */
-static u64 usbh2_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh2_resources[] = {
- {
- .start = MX27_USBOTG_BASE_ADDR + 0x400,
- .end = MX27_USBOTG_BASE_ADDR + 0x5ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MX27_INT_USB2,
- .end = MX27_INT_USB2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh2 = {
- .name = "mxc-ehci",
- .id = 2,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &usbh2_dmamask,
- },
- .resource = mxc_usbh2_resources,
- .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
-};
#endif
#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h
index a45d760..7a00bba 100644
--- a/arch/arm/mach-imx/devices.h
+++ b/arch/arm/mach-imx/devices.h
@@ -1,8 +1,5 @@
#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
extern struct platform_device mxc_otg_udc_device;
-extern struct platform_device mxc_otg_host;
-extern struct platform_device mxc_usbh1;
-extern struct platform_device mxc_usbh2;
extern struct platform_device mx21_usbhc_device;
extern struct platform_device imx_kpp_device;
#endif
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 06ff79a..c70b038 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -40,7 +40,6 @@
#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
#include <mach/mxc_nand.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx27.h"
@@ -213,12 +212,12 @@
#endif
#if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
@@ -281,13 +280,13 @@
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_otg_host, &otg_pdata);
+ imx27_add_mxc_ehci_otg(&otg_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
#endif
if (!otg_mode_host)
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index deef1fa..c9f12e4 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -35,7 +35,6 @@
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/iomux.h>
-#include <mach/mxc_ehci.h>
#include "devices-imx27.h"
#include "devices.h"
@@ -215,7 +214,8 @@
return 0;
}
-static struct mxc_usbh_platform_data visstrim_m10_usbotg_pdata = {
+static const struct mxc_usbh_platform_data
+visstrim_m10_usbotg_pdata __initconst = {
.init = otg_phy_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
@@ -237,7 +237,7 @@
imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
- mxc_register_device(&mxc_otg_host, &visstrim_m10_usbotg_pdata);
+ imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index b05f528..683374d 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -40,7 +40,6 @@
#include <mach/audmux.h>
#include <mach/mxc_nand.h>
#include <mach/irqs.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx27.h"
@@ -279,7 +278,7 @@
return 0;
}
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = otg_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -291,7 +290,7 @@
return 0;
}
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -410,13 +409,13 @@
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_otg_host, &otg_pdata);
+ imx27_add_mxc_ehci_otg(&otg_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
#endif
if (!otg_mode_host) {
gpio_set_value(OTG_PHY_CS_GPIO, 0);
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index b3340cd..e209b28 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -37,7 +37,6 @@
#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
#include <mach/mxc_nand.h>
-#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices-imx27.h"
@@ -283,7 +282,7 @@
}
};
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
@@ -320,7 +319,7 @@
spi_register_board_info(pcm038_spi_board_info,
ARRAY_SIZE(pcm038_spi_board_info));
- mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+ imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
imx27_add_fec(NULL);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));