Separate out the proc- and unit-specific header directories from the general
MN10300 arch headers and place them instead in the same directories as contain
the .c files for the processor and unit implementations.
This permits the symlinks include/asm/proc and include/asm/unit to be
dispensed with. This does, however, require that #include <asm/proc/xxx.h> be
converted to #include <proc/xxx.h> and similarly for asm/unit -> unit.
Signed-off-by: David Howells <dhowells@redhat.com>
diff --git a/arch/mn10300/include/asm/cache.h b/arch/mn10300/include/asm/cache.h
index 9e01122..e03cfa2 100644
--- a/arch/mn10300/include/asm/cache.h
+++ b/arch/mn10300/include/asm/cache.h
@@ -13,7 +13,7 @@
#define _ASM_CACHE_H
#include <asm/cpu-regs.h>
-#include <asm/proc/cache.h>
+#include <proc/cache.h>
#ifndef __ASSEMBLY__
#define L1_CACHE_DISPARITY (L1_CACHE_NENTRIES * L1_CACHE_BYTES)
diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h
index 53b3801..25c045d 100644
--- a/arch/mn10300/include/asm/irq.h
+++ b/arch/mn10300/include/asm/irq.h
@@ -16,7 +16,7 @@
#include <asm/intctl-regs.h>
#include <asm/reset-regs.h>
-#include <asm/proc/irq.h>
+#include <proc/irq.h>
/* this number is used when no interrupt has been assigned */
#define NO_IRQ INT_MAX
diff --git a/arch/mn10300/include/asm/proc-mn103e010/cache.h b/arch/mn10300/include/asm/proc-mn103e010/cache.h
deleted file mode 100644
index bdc1f9a5..0000000
--- a/arch/mn10300/include/asm/proc-mn103e010/cache.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* MN103E010 Cache specification
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_PROC_CACHE_H
-#define _ASM_PROC_CACHE_H
-
-/* L1 cache */
-
-#define L1_CACHE_NWAYS 4 /* number of ways in caches */
-#define L1_CACHE_NENTRIES 256 /* number of entries in each way */
-#define L1_CACHE_BYTES 16 /* bytes per entry */
-#define L1_CACHE_SHIFT 4 /* shift for bytes per entry */
-#define L1_CACHE_WAYDISP 0x1000 /* displacement of one way from the next */
-
-#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */
-#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */
-#define L1_CACHE_TAG_ENTRY 0x00000ff0 /* cache tag entry address mask */
-#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */
-
-/*
- * specification of the interval between interrupt checking intervals whilst
- * managing the cache with the interrupts disabled
- */
-#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4
-
-#endif /* _ASM_PROC_CACHE_H */
diff --git a/arch/mn10300/include/asm/proc-mn103e010/clock.h b/arch/mn10300/include/asm/proc-mn103e010/clock.h
deleted file mode 100644
index caf9983..0000000
--- a/arch/mn10300/include/asm/proc-mn103e010/clock.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* MN103E010-specific clocks
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_PROC_CLOCK_H
-#define _ASM_PROC_CLOCK_H
-
-#include <asm/unit/clock.h>
-
-#define MN10300_WDCLK MN10300_IOCLK
-
-#endif /* _ASM_PROC_CLOCK_H */
diff --git a/arch/mn10300/include/asm/proc-mn103e010/irq.h b/arch/mn10300/include/asm/proc-mn103e010/irq.h
deleted file mode 100644
index aa6ee8f..0000000
--- a/arch/mn10300/include/asm/proc-mn103e010/irq.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* MN103E010 On-board interrupt controller numbers
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_PROC_IRQ_H
-#define _ASM_PROC_IRQ_H
-
-#ifdef __KERNEL__
-
-#define GxICR_NUM_IRQS 42
-
-#define GxICR_NUM_XIRQS 8
-
-#define XIRQ0 34
-#define XIRQ1 35
-#define XIRQ2 36
-#define XIRQ3 37
-#define XIRQ4 38
-#define XIRQ5 39
-#define XIRQ6 40
-#define XIRQ7 41
-
-#define XIRQ2IRQ(num) (XIRQ0 + num)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_PROC_IRQ_H */
diff --git a/arch/mn10300/include/asm/proc-mn103e010/proc.h b/arch/mn10300/include/asm/proc-mn103e010/proc.h
deleted file mode 100644
index 22a2b93..0000000
--- a/arch/mn10300/include/asm/proc-mn103e010/proc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* MN103E010 Processor description
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_PROC_PROC_H
-#define _ASM_PROC_PROC_H
-
-#define PROCESSOR_VENDOR_NAME "Matsushita"
-#define PROCESSOR_MODEL_NAME "mn103e010"
-
-#endif /* _ASM_PROC_PROC_H */
diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h
index 99785a9..a29445c 100644
--- a/arch/mn10300/include/asm/serial.h
+++ b/arch/mn10300/include/asm/serial.h
@@ -33,4 +33,4 @@
#define RS_TABLE_SIZE
#endif
-#include <asm/unit/serial.h>
+#include <unit/serial.h>
diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h
index 3944277..8d031f9 100644
--- a/arch/mn10300/include/asm/timex.h
+++ b/arch/mn10300/include/asm/timex.h
@@ -12,7 +12,7 @@
#define _ASM_TIMEX_H
#include <asm/hardirq.h>
-#include <asm/unit/timex.h>
+#include <unit/timex.h>
#define TICK_SIZE (tick_nsec / 1000)
diff --git a/arch/mn10300/include/asm/unit-asb2303/clock.h b/arch/mn10300/include/asm/unit-asb2303/clock.h
deleted file mode 100644
index 8b450e9..0000000
--- a/arch/mn10300/include/asm/unit-asb2303/clock.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* ASB2303-specific clocks
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_UNIT_CLOCK_H
-#define _ASM_UNIT_CLOCK_H
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_MN10300_RTC
-
-extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */
-extern unsigned long mn10300_iobclk;
-extern unsigned long mn10300_tsc_per_HZ;
-
-#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
-/* If this processors has a another clock, uncomment the below. */
-/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
-
-#else /* !CONFIG_MN10300_RTC */
-
-#define MN10300_IOCLK 33333333UL
-/* #define MN10300_IOBCLK 66666666UL */
-
-#endif /* !CONFIG_MN10300_RTC */
-
-#define MN10300_JCCLK MN10300_IOCLK
-#define MN10300_TSCCLK MN10300_IOCLK
-
-#ifdef CONFIG_MN10300_RTC
-#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
-#else /* !CONFIG_MN10300_RTC */
-#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
-#endif /* !CONFIG_MN10300_RTC */
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/arch/mn10300/include/asm/unit-asb2303/leds.h b/arch/mn10300/include/asm/unit-asb2303/leds.h
deleted file mode 100644
index 3a7543e..0000000
--- a/arch/mn10300/include/asm/unit-asb2303/leds.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* ASB2303-specific LEDs
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_UNIT_LEDS_H
-#define _ASM_UNIT_LEDS_H
-
-#include <asm/pio-regs.h>
-#include <asm/cpu-regs.h>
-#include <asm/exceptions.h>
-
-#define ASB2303_GPIO0DEF __SYSREG(0xDB000000, u32)
-#define ASB2303_7SEGLEDS __SYSREG(0xDB000008, u32)
-
-/*
- * use the 7-segment LEDs to indicate states
- */
-
-/* flip the 7-segment LEDs between "G" and "-" */
-#define mn10300_set_gdbleds(ONOFF) \
-do { \
- ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f; \
-} while (0)
-
-/* indicate double-fault by displaying "d" on the LEDs */
-#define mn10300_set_dbfleds \
- mov 0x43,d0 ; \
- movbu d0,(ASB2303_7SEGLEDS)
-
-#ifndef __ASSEMBLY__
-extern void peripheral_leds_display_exception(enum exception_code code);
-extern void peripheral_leds_led_chase(void);
-extern void debug_to_serial(const char *p, int n);
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_UNIT_LEDS_H */
diff --git a/arch/mn10300/include/asm/unit-asb2303/serial.h b/arch/mn10300/include/asm/unit-asb2303/serial.h
deleted file mode 100644
index 0d55cf5..0000000
--- a/arch/mn10300/include/asm/unit-asb2303/serial.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/* ASB2303-specific 8250 serial ports
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_UNIT_SERIAL_H
-#define _ASM_UNIT_SERIAL_H
-
-#include <asm/cpu-regs.h>
-#include <asm/proc/irq.h>
-#include <linux/serial_reg.h>
-
-#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000
-#define SERIAL_PORT1_BASE_ADDRESS 0xA6FC0000
-
-#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */
-
-/*
- * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports
- */
-#ifndef CONFIG_GDBSTUB_ON_TTYSx
-
-#define SERIAL_PORT_DFNS \
- { \
- .baud_base = BASE_BAUD, \
- .irq = SERIAL_IRQ, \
- .flags = STD_COM_FLAGS, \
- .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \
- .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM, \
- }, \
- { \
- .baud_base = BASE_BAUD, \
- .irq = SERIAL_IRQ, \
- .flags = STD_COM_FLAGS, \
- .iomem_base = (u8 *) SERIAL_PORT1_BASE_ADDRESS, \
- .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM, \
- },
-
-#ifndef __ASSEMBLY__
-
-static inline void __debug_to_serial(const char *p, int n)
-{
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#else /* CONFIG_GDBSTUB_ON_TTYSx */
-
-#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */
-
-#if defined(CONFIG_GDBSTUB_ON_TTYS0)
-#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8)
-#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
-#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
-#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
-#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
-#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
-#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
-#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
-#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
-#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
-#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
-#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
-#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
-
-#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
-#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX * 4, u8)
-#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX * 4, u8)
-#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8)
-#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8)
-#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8)
-#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8)
-#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8)
-#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8)
-#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8)
-#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8)
-#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8)
-#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8)
-#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
-#endif
-
-#ifndef __ASSEMBLY__
-
-#define LSR_WAIT_FOR(STATE) \
-do { \
- while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {} \
-} while (0)
-#define FLOWCTL_WAIT_FOR(LINE) \
-do { \
- while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {} \
-} while (0)
-#define FLOWCTL_CLEAR(LINE) \
-do { \
- GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \
-} while (0)
-#define FLOWCTL_SET(LINE) \
-do { \
- GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; \
-} while (0)
-#define FLOWCTL_QUERY(LINE) ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; })
-
-static inline void __debug_to_serial(const char *p, int n)
-{
- char ch;
-
- FLOWCTL_SET(DTR);
-
- for (; n > 0; n--) {
- LSR_WAIT_FOR(THRE);
- FLOWCTL_WAIT_FOR(CTS);
-
- ch = *p++;
- if (ch == 0x0a) {
- GDBPORT_SERIAL_TX = 0x0d;
- LSR_WAIT_FOR(THRE);
- FLOWCTL_WAIT_FOR(CTS);
- }
- GDBPORT_SERIAL_TX = ch;
- }
-
- FLOWCTL_CLEAR(DTR);
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* CONFIG_GDBSTUB_ON_TTYSx */
-
-#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/arch/mn10300/include/asm/unit-asb2303/smc91111.h b/arch/mn10300/include/asm/unit-asb2303/smc91111.h
deleted file mode 100644
index dd456e9..0000000
--- a/arch/mn10300/include/asm/unit-asb2303/smc91111.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* Support for the SMC91C111 NIC on an ASB2303
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_UNIT_SMC91111_H
-#define _ASM_UNIT_SMC91111_H
-
-#include <asm/intctl-regs.h>
-
-#define SMC91111_BASE 0xAA000300UL
-#define SMC91111_BASE_END 0xAA000400UL
-#define SMC91111_IRQ XIRQ3
-
-#define SMC_CAN_USE_8BIT 0
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 0
-#define SMC_NOWAIT 1
-#define SMC_IRQ_FLAGS (0)
-
-#if SMC_CAN_USE_8BIT
-#define SMC_inb(a, r) inb((unsigned long) ((a) + (r)))
-#define SMC_outb(v, a, r) outb(v, (unsigned long) ((a) + (r)))
-#endif
-
-#if SMC_CAN_USE_16BIT
-#define SMC_inw(a, r) inw((unsigned long) ((a) + (r)))
-#define SMC_outw(v, a, r) outw(v, (unsigned long) ((a) + (r)))
-#define SMC_insw(a, r, p, l) insw((unsigned long) ((a) + (r)), (p), (l))
-#define SMC_outsw(a, r, p, l) outsw((unsigned long) ((a) + (r)), (p), (l))
-#endif
-
-#if SMC_CAN_USE_32BIT
-#define SMC_inl(a, r) inl((unsigned long) ((a) + (r)))
-#define SMC_outl(v, a, r) outl(v, (unsigned long) ((a) + (r)))
-#define SMC_insl(a, r, p, l) insl((unsigned long) ((a) + (r)), (p), (l))
-#define SMC_outsl(a, r, p, l) outsl((unsigned long) ((a) + (r)), (p), (l))
-#endif
-
-#define RPC_LSA_DEFAULT RPC_LED_100_10
-#define RPC_LSB_DEFAULT RPC_LED_TX_RX
-
-#define set_irq_type(irq, type)
-
-#endif /* _ASM_UNIT_SMC91111_H */
diff --git a/arch/mn10300/include/asm/unit-asb2303/timex.h b/arch/mn10300/include/asm/unit-asb2303/timex.h
deleted file mode 100644
index 7e54b0cf..0000000
--- a/arch/mn10300/include/asm/unit-asb2303/timex.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/* ASB2303-specific timer specifcations
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_UNIT_TIMEX_H
-#define _ASM_UNIT_TIMEX_H
-
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
-#include <asm/timer-regs.h>
-#include <asm/unit/clock.h>
-
-/*
- * jiffies counter specifications
- */
-
-#define TMJCBR_MAX 0xffff
-#define TMJCBC TM01BC
-
-#define TMJCMD TM01MD
-#define TMJCBR TM01BR
-#define TMJCIRQ TM1IRQ
-#define TMJCICR TM1ICR
-#define TMJCICR_LEVEL GxICR_LEVEL_5
-
-#ifndef __ASSEMBLY__
-
-static inline void startup_jiffies_counter(void)
-{
- unsigned rate;
- u16 md, t16;
-
- /* use as little prescaling as possible to avoid losing accuracy */
- md = TM0MD_SRC_IOCLK;
- rate = MN10300_JCCLK / HZ;
-
- if (rate > TMJCBR_MAX) {
- md = TM0MD_SRC_IOCLK_8;
- rate = MN10300_JCCLK / 8 / HZ;
-
- if (rate > TMJCBR_MAX) {
- md = TM0MD_SRC_IOCLK_32;
- rate = MN10300_JCCLK / 32 / HZ;
-
- if (rate > TMJCBR_MAX)
- BUG();
- }
- }
-
- TMJCBR = rate - 1;
- t16 = TMJCBR;
-
- TMJCMD =
- md |
- TM1MD_SRC_TM0CASCADE << 8 |
- TM0MD_INIT_COUNTER |
- TM1MD_INIT_COUNTER << 8;
-
- TMJCMD =
- md |
- TM1MD_SRC_TM0CASCADE << 8 |
- TM0MD_COUNT_ENABLE |
- TM1MD_COUNT_ENABLE << 8;
-
- t16 = TMJCMD;
-
- TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
- t16 = TMJCICR;
-}
-
-static inline void shutdown_jiffies_counter(void)
-{
-}
-
-#endif /* !__ASSEMBLY__ */
-
-
-/*
- * timestamp counter specifications
- */
-
-#define TMTSCBR_MAX 0xffffffff
-#define TMTSCBC TM45BC
-
-#ifndef __ASSEMBLY__
-
-static inline void startup_timestamp_counter(void)
-{
- /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
- * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
- */
- TM45BR = TMTSCBR_MAX;
-
- TM4MD = TM4MD_SRC_IOCLK;
- TM4MD |= TM4MD_INIT_COUNTER;
- TM4MD &= ~TM4MD_INIT_COUNTER;
- TM4ICR = 0;
-
- TM5MD = TM5MD_SRC_TM4CASCADE;
- TM5MD |= TM5MD_INIT_COUNTER;
- TM5MD &= ~TM5MD_INIT_COUNTER;
- TM5ICR = 0;
-
- TM5MD |= TM5MD_COUNT_ENABLE;
- TM4MD |= TM4MD_COUNT_ENABLE;
-}
-
-static inline void shutdown_timestamp_counter(void)
-{
- TM4MD = 0;
- TM5MD = 0;
-}
-
-/*
- * we use a cascaded pair of 16-bit down-counting timers to count I/O
- * clock cycles for the purposes of time keeping
- */
-typedef unsigned long cycles_t;
-
-static inline cycles_t read_timestamp_counter(void)
-{
- return (cycles_t)TMTSCBC;
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/arch/mn10300/include/asm/unit-asb2305/clock.h b/arch/mn10300/include/asm/unit-asb2305/clock.h
deleted file mode 100644
index 7d51484..0000000
--- a/arch/mn10300/include/asm/unit-asb2305/clock.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* ASB2305-specific clocks
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_UNIT_CLOCK_H
-#define _ASM_UNIT_CLOCK_H
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_MN10300_RTC
-
-extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */
-extern unsigned long mn10300_iobclk;
-extern unsigned long mn10300_tsc_per_HZ;
-
-#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
-/* If this processors has a another clock, uncomment the below. */
-/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
-
-#else /* !CONFIG_MN10300_RTC */
-
-#define MN10300_IOCLK 33333333UL
-/* #define MN10300_IOBCLK 66666666UL */
-
-#endif /* !CONFIG_MN10300_RTC */
-
-#define MN10300_JCCLK MN10300_IOCLK
-#define MN10300_TSCCLK MN10300_IOCLK
-
-#ifdef CONFIG_MN10300_RTC
-#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
-#else /* !CONFIG_MN10300_RTC */
-#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
-#endif /* !CONFIG_MN10300_RTC */
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/arch/mn10300/include/asm/unit-asb2305/leds.h b/arch/mn10300/include/asm/unit-asb2305/leds.h
deleted file mode 100644
index bc471f6..0000000
--- a/arch/mn10300/include/asm/unit-asb2305/leds.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* ASB2305-specific LEDs
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_UNIT_LEDS_H
-#define _ASM_UNIT_LEDS_H
-
-#include <asm/pio-regs.h>
-#include <asm/cpu-regs.h>
-#include <asm/exceptions.h>
-
-#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32)
-
-/* perform a hard reset by driving PIO06 low */
-#define mn10300_unit_hard_reset() \
-do { \
- P0OUT &= 0xbf; \
- P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \
-} while (0)
-
-/*
- * use the 7-segment LEDs to indicate states
- */
-/* indicate double-fault by displaying "db-f" on the LEDs */
-#define mn10300_set_dbfleds \
- mov 0x43077f1d,d0 ; \
- mov d0,(ASB2305_7SEGLEDS)
-
-/* flip the 7-segment LEDs between "Gdb-" and "----" */
-#define mn10300_set_gdbleds(ONOFF) \
-do { \
- ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \
-} while (0)
-
-#ifndef __ASSEMBLY__
-extern void peripheral_leds_display_exception(enum exception_code);
-extern void peripheral_leds_led_chase(void);
-extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int);
-extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int);
-extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int);
-extern void peripheral_leds7x4_display_rtc(void);
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_UNIT_LEDS_H */
diff --git a/arch/mn10300/include/asm/unit-asb2305/serial.h b/arch/mn10300/include/asm/unit-asb2305/serial.h
deleted file mode 100644
index 73d31d6..0000000
--- a/arch/mn10300/include/asm/unit-asb2305/serial.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/* ASB2305-specific 8250 serial ports
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_UNIT_SERIAL_H
-#define _ASM_UNIT_SERIAL_H
-
-#include <asm/cpu/cpu-regs.h>
-#include <asm/proc/irq.h>
-#include <linux/serial_reg.h>
-
-#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000
-#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8)
-
-#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */
-
-/*
- * dispose of the /dev/ttyS0 serial port
- */
-#ifndef CONFIG_GDBSTUB_ON_TTYSx
-
-#define SERIAL_PORT_DFNS \
- { \
- .baud_base = BASE_BAUD, \
- .irq = SERIAL_IRQ, \
- .flags = STD_COM_FLAGS, \
- .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \
- .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM, \
- },
-
-#ifndef __ASSEMBLY__
-
-static inline void __debug_to_serial(const char *p, int n)
-{
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#else /* CONFIG_GDBSTUB_ON_TTYSx */
-
-#define SERIAL_PORT_DFNS /* stolen by gdb-stub */
-
-#if defined(CONFIG_GDBSTUB_ON_TTYS0)
-#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8)
-#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
-#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
-#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
-#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
-#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
-#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
-#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
-#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
-#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
-#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
-#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
-#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
-
-#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
-#error The ASB2305 doesnt have a /dev/ttyS1
-#endif
-
-#ifndef __ASSEMBLY__
-
-#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
-#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
-#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
-#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
-
-#define LSR_WAIT_FOR(STATE) \
-do { \
- while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \
-} while (0)
-#define FLOWCTL_WAIT_FOR(LINE) \
-do { \
- while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \
-} while (0)
-#define FLOWCTL_CLEAR(LINE) \
-do { \
- TTYS0_MCR &= ~UART_MCR_##LINE; \
-} while (0)
-#define FLOWCTL_SET(LINE) \
-do { \
- TTYS0_MCR |= UART_MCR_##LINE; \
-} while (0)
-#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; })
-
-static inline void __debug_to_serial(const char *p, int n)
-{
- char ch;
-
- FLOWCTL_SET(DTR);
-
- for (; n > 0; n--) {
- LSR_WAIT_FOR(THRE);
- FLOWCTL_WAIT_FOR(CTS);
-
- ch = *p++;
- if (ch == 0x0a) {
- TTYS0_TX = 0x0d;
- LSR_WAIT_FOR(THRE);
- FLOWCTL_WAIT_FOR(CTS);
- }
- TTYS0_TX = ch;
- }
-
- FLOWCTL_CLEAR(DTR);
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* CONFIG_GDBSTUB_ON_TTYSx */
-
-#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/arch/mn10300/include/asm/unit-asb2305/timex.h b/arch/mn10300/include/asm/unit-asb2305/timex.h
deleted file mode 100644
index 10e1bfe..0000000
--- a/arch/mn10300/include/asm/unit-asb2305/timex.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/* ASB2305 timer specifcations
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_UNIT_TIMEX_H
-#define _ASM_UNIT_TIMEX_H
-
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
-#include <asm/cpu/timer-regs.h>
-#include <asm/unit/clock.h>
-
-/*
- * jiffies counter specifications
- */
-
-#define TMJCBR_MAX 0xffff
-#define TMJCBC TM01BC
-
-#define TMJCMD TM01MD
-#define TMJCBR TM01BR
-#define TMJCIRQ TM1IRQ
-#define TMJCICR TM1ICR
-#define TMJCICR_LEVEL GxICR_LEVEL_5
-
-#ifndef __ASSEMBLY__
-
-static inline void startup_jiffies_counter(void)
-{
- unsigned rate;
- u16 md, t16;
-
- /* use as little prescaling as possible to avoid losing accuracy */
- md = TM0MD_SRC_IOCLK;
- rate = MN10300_JCCLK / HZ;
-
- if (rate > TMJCBR_MAX) {
- md = TM0MD_SRC_IOCLK_8;
- rate = MN10300_JCCLK / 8 / HZ;
-
- if (rate > TMJCBR_MAX) {
- md = TM0MD_SRC_IOCLK_32;
- rate = MN10300_JCCLK / 32 / HZ;
-
- if (rate > TMJCBR_MAX)
- BUG();
- }
- }
-
- TMJCBR = rate - 1;
- t16 = TMJCBR;
-
- TMJCMD =
- md |
- TM1MD_SRC_TM0CASCADE << 8 |
- TM0MD_INIT_COUNTER |
- TM1MD_INIT_COUNTER << 8;
-
- TMJCMD =
- md |
- TM1MD_SRC_TM0CASCADE << 8 |
- TM0MD_COUNT_ENABLE |
- TM1MD_COUNT_ENABLE << 8;
-
- t16 = TMJCMD;
-
- TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
- t16 = TMJCICR;
-}
-
-static inline void shutdown_jiffies_counter(void)
-{
-}
-
-#endif /* !__ASSEMBLY__ */
-
-
-/*
- * timestamp counter specifications
- */
-
-#define TMTSCBR_MAX 0xffffffff
-#define TMTSCBC TM45BC
-
-#ifndef __ASSEMBLY__
-
-static inline void startup_timestamp_counter(void)
-{
- /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
- * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
- */
- TM45BR = TMTSCBR_MAX;
-
- TM4MD = TM4MD_SRC_IOCLK;
- TM4MD |= TM4MD_INIT_COUNTER;
- TM4MD &= ~TM4MD_INIT_COUNTER;
- TM4ICR = 0;
-
- TM5MD = TM5MD_SRC_TM4CASCADE;
- TM5MD |= TM5MD_INIT_COUNTER;
- TM5MD &= ~TM5MD_INIT_COUNTER;
- TM5ICR = 0;
-
- TM5MD |= TM5MD_COUNT_ENABLE;
- TM4MD |= TM4MD_COUNT_ENABLE;
-}
-
-static inline void shutdown_timestamp_counter(void)
-{
- TM4MD = 0;
- TM5MD = 0;
-}
-
-/*
- * we use a cascaded pair of 16-bit down-counting timers to count I/O
- * clock cycles for the purposes of time keeping
- */
-typedef unsigned long cycles_t;
-
-static inline cycles_t read_timestamp_counter(void)
-{
- return (cycles_t) TMTSCBC;
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_UNIT_TIMEX_H */