[POWERPC] 85xx: Convert dts to v1 syntax
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 1f470c6..fa298a8 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -1,7 +1,7 @@
/*
* MPC8548 CDS Device Tree Source
*
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -9,6 +9,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8548CDS";
@@ -36,11 +37,11 @@
PowerPC,8548@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
@@ -49,31 +50,31 @@
memory {
device_type = "memory";
- reg = <00000000 08000000>; // 128M at 0x0
+ reg = <0x0 0x8000000>; // 128M at 0x0
};
soc8548@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <00000000 e0000000 00100000>;
- reg = <e0000000 00001000>; // CCSRBAR
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>; // CCSRBAR
bus-frequency = <0>;
memory-controller@2000 {
compatible = "fsl,8548-memory-controller";
- reg = <2000 1000>;
+ reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
- interrupts = <12 2>;
+ interrupts = <18 2>;
};
l2-cache-controller@20000 {
compatible = "fsl,8548-l2-cache-controller";
- reg = <20000 1000>;
- cache-line-size = <20>; // 32 bytes
- cache-size = <80000>; // L2, 512K
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
interrupt-parent = <&mpic>;
- interrupts = <10 2>;
+ interrupts = <16 2>;
};
i2c@3000 {
@@ -81,8 +82,8 @@
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -92,8 +93,8 @@
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
@@ -102,30 +103,30 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <2>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
- reg = <3>;
+ reg = <0x3>;
device_type = "ethernet-phy";
};
};
@@ -135,9 +136,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
@@ -147,9 +148,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
@@ -160,9 +161,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <26000 1000>;
+ reg = <0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1f 2 20 2 21 2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
};
@@ -172,9 +173,9 @@
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
- reg = <27000 1000>;
+ reg = <0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <25 2 26 2 27 2>;
+ interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
@@ -184,9 +185,9 @@
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>; // reg base, size
+ reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -194,15 +195,15 @@
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>; // reg base, size
+ reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities reg
compatible = "fsl,mpc8548-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
@@ -211,7 +212,7 @@
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
@@ -220,139 +221,139 @@
pci0: pci@e0008000 {
cell-index = <0>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
- 02000 0 0 1 &mpic 0 1
- 02000 0 0 2 &mpic 1 1
- 02000 0 0 3 &mpic 2 1
- 02000 0 0 4 &mpic 3 1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x5 (PCIX Slot 3) */
- 02800 0 0 1 &mpic 1 1
- 02800 0 0 2 &mpic 2 1
- 02800 0 0 3 &mpic 3 1
- 02800 0 0 4 &mpic 0 1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 0x6 (PCIX Slot 4) */
- 03000 0 0 1 &mpic 2 1
- 03000 0 0 2 &mpic 3 1
- 03000 0 0 3 &mpic 0 1
- 03000 0 0 4 &mpic 1 1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x8 (PCIX Slot 5) */
- 04000 0 0 1 &mpic 0 1
- 04000 0 0 2 &mpic 1 1
- 04000 0 0 3 &mpic 2 1
- 04000 0 0 4 &mpic 3 1
+ 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0xC (Tsi310 bridge) */
- 06000 0 0 1 &mpic 0 1
- 06000 0 0 2 &mpic 1 1
- 06000 0 0 3 &mpic 2 1
- 06000 0 0 4 &mpic 3 1
+ 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x14 (Slot 2) */
- 0a000 0 0 1 &mpic 0 1
- 0a000 0 0 2 &mpic 1 1
- 0a000 0 0 3 &mpic 2 1
- 0a000 0 0 4 &mpic 3 1
+ 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x15 (Slot 3) */
- 0a800 0 0 1 &mpic 1 1
- 0a800 0 0 2 &mpic 2 1
- 0a800 0 0 3 &mpic 3 1
- 0a800 0 0 4 &mpic 0 1
+ 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1
/* IDSEL 0x16 (Slot 4) */
- 0b000 0 0 1 &mpic 2 1
- 0b000 0 0 2 &mpic 3 1
- 0b000 0 0 3 &mpic 0 1
- 0b000 0 0 4 &mpic 1 1
+ 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1
+ 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x18 (Slot 5) */
- 0c000 0 0 1 &mpic 0 1
- 0c000 0 0 2 &mpic 1 1
- 0c000 0 0 3 &mpic 2 1
- 0c000 0 0 4 &mpic 3 1
+ 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
- 0E000 0 0 1 &mpic 0 1
- 0E000 0 0 2 &mpic 1 1
- 0E000 0 0 3 &mpic 2 1
- 0E000 0 0 4 &mpic 3 1>;
+ 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ interrupts = <24 2>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 10000000
- 01000000 0 00000000 e2000000 0 00800000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
pci_bridge@1c {
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x00 (PrPMC Site) */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x04 (VIA chip) */
- 2000 0 0 1 &mpic 0 1
- 2000 0 0 2 &mpic 1 1
- 2000 0 0 3 &mpic 2 1
- 2000 0 0 4 &mpic 3 1
+ 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
/* IDSEL 0x05 (8139) */
- 2800 0 0 1 &mpic 1 1
+ 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
/* IDSEL 0x06 (Slot 6) */
- 3000 0 0 1 &mpic 2 1
- 3000 0 0 2 &mpic 3 1
- 3000 0 0 3 &mpic 0 1
- 3000 0 0 4 &mpic 1 1
+ 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
+ 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDESL 0x07 (Slot 7) */
- 3800 0 0 1 &mpic 3 1
- 3800 0 0 2 &mpic 0 1
- 3800 0 0 3 &mpic 1 1
- 3800 0 0 4 &mpic 2 1>;
+ 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1
+ 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>;
- reg = <e000 0 0 0 0>;
+ reg = <0xe000 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00080000>;
- clock-frequency = <1fca055>;
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x80000>;
+ clock-frequency = <33333333>;
isa@4 {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
- reg = <2000 0 0 0 0>;
- ranges = <1 0 01000000 0 0 00001000>;
+ reg = <0x2000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
interrupt-controller;
device_type = "interrupt-controller";
- reg = <1 20 2
- 1 a0 2
- 1 4d0 2>;
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
@@ -362,7 +363,7 @@
rtc@70 {
compatible = "pnpPNP,b00";
- reg = <1 70 2>;
+ reg = <0x1 0x70 0x2>;
};
};
};
@@ -370,64 +371,64 @@
pci1: pci@e0009000 {
cell-index = <1>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
- a800 0 0 1 &mpic b 1
- a800 0 0 2 &mpic 1 1
- a800 0 0 3 &mpic 2 1
- a800 0 0 4 &mpic 3 1>;
+ 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+ 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <19 2>;
+ interrupts = <25 2>;
bus-range = <0 0>;
- ranges = <02000000 0 90000000 90000000 0 10000000
- 01000000 0 00000000 e2800000 0 00800000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+ 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0009000 1000>;
+ reg = <0xe0009000 0x1000>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};
pci2: pcie@e000a000 {
cell-index = <2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 (PEX) */
- 00000 0 0 1 &mpic 0 1
- 00000 0 0 2 &mpic 1 1
- 00000 0 0 3 &mpic 2 1
- 00000 0 0 4 &mpic 3 1>;
+ 00000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 00000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 00000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 08000000>;
- clock-frequency = <1fca055>;
+ interrupts = <26 2>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>;
+ clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e000a000 1000>;
+ reg = <0xe000a000 0x1000>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
pcie@0 {
- reg = <0 0 0 0 0>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 20000000
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 08000000>;
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x8000000>;
};
};
};