ARM: tegra: convert device tree files to use GPIO defines
Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties,
and some interrupts properties. Use standard GPIO flag defines too.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 0855b5e..3952757 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -18,7 +18,8 @@
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
- nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+ GPIO_ACTIVE_HIGH>;
};
};
@@ -313,7 +314,7 @@
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
- interrupts = <187 0x04>;
+ interrupts = <TEGRA_GPIO(X, 3) 0x04>;
gpio-controller;
#gpio-cells = <2>;
@@ -328,14 +329,14 @@
compatible = "isil,isl29018";
reg = <0x44>;
interrupt-parent = <&gpio>;
- interrupts = <202 0x04>; /* GPIO PZ2 */
+ interrupts = <TEGRA_GPIO(Z, 2) 0x04>;
};
gyrometer@68 {
compatible = "invn,mpu3050";
reg = <0x68>;
interrupt-parent = <&gpio>;
- interrupts = <204 0x04>; /* gpio PZ4 */
+ interrupts = <TEGRA_GPIO(Z, 4) 0x04>;
};
};
@@ -511,7 +512,7 @@
compatible = "ak,ak8975";
reg = <0xc>;
interrupt-parent = <&gpio>;
- interrupts = <109 0x04>; /* gpio PN5 */
+ interrupts = <TEGRA_GPIO(N, 5) 0x04>;
};
};
@@ -565,7 +566,7 @@
usb@c5000000 {
status = "okay";
- nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
dr_mode = "otg";
};
@@ -577,12 +578,14 @@
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+ GPIO_ACTIVE_LOW>;
};
usb-phy@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+ GPIO_ACTIVE_LOW>;
};
usb@c5008000 {
@@ -595,16 +598,16 @@
sdhci@c8000000 {
status = "okay";
- power-gpios = <&gpio 86 0>; /* gpio PK6 */
+ power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 1>; /* gpio PI5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
@@ -632,14 +635,14 @@
power {
label = "Power";
- gpios = <&gpio 170 1>; /* gpio PV2, active low */
+ gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
lid {
label = "Lid";
- gpios = <&gpio 23 0>; /* gpio PC7 */
+ gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
@@ -806,7 +809,7 @@
regulator-name = "vdd_1v5";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&pmic 0 0>;
+ gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
};
regulator@2 {
@@ -815,7 +818,7 @@
regulator-name = "vdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- gpio = <&pmic 1 0>;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -847,8 +850,8 @@
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&wm8903>;
- nvidia,spkr-en-gpios = <&wm8903 2 0>;
- nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */
+ nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>;
clock-names = "pll_a", "pll_a_out0", "mclk";