ARM: tegra: convert device tree files to use GPIO defines
Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties,
and some interrupts properties. Use standard GPIO flag defines too.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
index 3934b0f..1082c5e 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -22,7 +22,7 @@
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&pmic 6 0>;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
};
sys_3v3_reg: regulator@101 {
@@ -34,7 +34,7 @@
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&pmic 7 0>;
+ gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
};
usb1_vbus_reg: regulator@102 {
@@ -44,7 +44,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 68 0>; /* GPIO PI4 */
+ gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
@@ -56,7 +56,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 63 0>; /* GPIO PH7 */
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
@@ -68,7 +68,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&pmic 2 0>;
+ gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
};
vdd_bl_reg: regulator@105 {
@@ -80,13 +80,13 @@
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio 83 0>; /* GPIO PK3 */
+ gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
};
};
sdhci@78000400 {
status = "okay";
- power-gpios = <&gpio 28 0>; /* gpio PD4 */
+ power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};