ARM: S3C24XX: use clk_get_rate to init fclk in common_setup_clocks
Previously the fclk rate was calculated by dividing the pll through
the divider value of the armdiv. With a real armdiv clk in place it's
possible to simply read its value, which does essentially the same.
This change makes the whole fdiv_fn function pointers supplied to
s3c2443_common_init_clocks and s3c2443_common_setup_clocks
obsolete, so remove it too.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 40a8720..d3ebbee 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -520,8 +520,7 @@
/* EPLLCON compatible enough to get on/off information */
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
- fdiv_fn get_fdiv)
+void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
{
unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
@@ -541,7 +540,7 @@
pll = get_mpll(mpllcon, xtal);
clk_msysclk.clk.rate = pll;
- fclk = pll / get_fdiv(clkdiv0);
+ fclk = clk_get_rate(&clk_armdiv);
hclk = s3c2443_prediv_getrate(&clk_prediv);
hclk /= s3c2443_get_hdiv(clkdiv0);
pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
@@ -590,7 +589,6 @@
};
void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
- fdiv_fn get_fdiv,
unsigned int *divs, int nr_divs,
int divmask)
{
@@ -620,5 +618,5 @@
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c2443_common_setup_clocks(get_mpll, get_fdiv);
+ s3c2443_common_setup_clocks(get_mpll);
}