| /* | 
 |  * linux/arch/arm/mach-at91/board-csb637.c | 
 |  * | 
 |  *  Copyright (C) 2005 SAN People | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
 |  */ | 
 |  | 
 | #include <linux/types.h> | 
 | #include <linux/init.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/mtd/physmap.h> | 
 |  | 
 | #include <asm/setup.h> | 
 | #include <asm/mach-types.h> | 
 | #include <asm/irq.h> | 
 |  | 
 | #include <asm/mach/arch.h> | 
 | #include <asm/mach/map.h> | 
 | #include <asm/mach/irq.h> | 
 |  | 
 | #include <mach/hardware.h> | 
 | #include <mach/board.h> | 
 | #include <mach/gpio.h> | 
 |  | 
 | #include "generic.h" | 
 |  | 
 |  | 
 | static void __init csb637_init_early(void) | 
 | { | 
 | 	/* Initialize processor: 3.6864 MHz crystal */ | 
 | 	at91_initialize(3686400); | 
 |  | 
 | 	/* DBGU on ttyS0. (Rx & Tx only) */ | 
 | 	at91_register_uart(0, 0, 0); | 
 |  | 
 | 	/* make console=ttyS0 (ie, DBGU) the default */ | 
 | 	at91_set_serial_console(0); | 
 | } | 
 |  | 
 | static struct at91_eth_data __initdata csb637_eth_data = { | 
 | 	.phy_irq_pin	= AT91_PIN_PC0, | 
 | 	.is_rmii	= 0, | 
 | }; | 
 |  | 
 | static struct at91_usbh_data __initdata csb637_usbh_data = { | 
 | 	.ports		= 2, | 
 | }; | 
 |  | 
 | static struct at91_udc_data __initdata csb637_udc_data = { | 
 | 	.vbus_pin     = AT91_PIN_PB28, | 
 | 	.pullup_pin   = AT91_PIN_PB1, | 
 | }; | 
 |  | 
 | #define CSB_FLASH_BASE	AT91_CHIPSELECT_0 | 
 | #define CSB_FLASH_SIZE	SZ_16M | 
 |  | 
 | static struct mtd_partition csb_flash_partitions[] = { | 
 | 	{ | 
 | 		.name		= "uMON flash", | 
 | 		.offset		= 0, | 
 | 		.size		= MTDPART_SIZ_FULL, | 
 | 		.mask_flags	= MTD_WRITEABLE,	/* read only */ | 
 | 	} | 
 | }; | 
 |  | 
 | static struct physmap_flash_data csb_flash_data = { | 
 | 	.width		= 2, | 
 | 	.parts		= csb_flash_partitions, | 
 | 	.nr_parts	= ARRAY_SIZE(csb_flash_partitions), | 
 | }; | 
 |  | 
 | static struct resource csb_flash_resources[] = { | 
 | 	{ | 
 | 		.start	= CSB_FLASH_BASE, | 
 | 		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1, | 
 | 		.flags	= IORESOURCE_MEM, | 
 | 	} | 
 | }; | 
 |  | 
 | static struct platform_device csb_flash = { | 
 | 	.name		= "physmap-flash", | 
 | 	.id		= 0, | 
 | 	.dev		= { | 
 | 				.platform_data = &csb_flash_data, | 
 | 			}, | 
 | 	.resource	= csb_flash_resources, | 
 | 	.num_resources	= ARRAY_SIZE(csb_flash_resources), | 
 | }; | 
 |  | 
 | static struct gpio_led csb_leds[] = { | 
 | 	{	/* "d1", red */ | 
 | 		.name			= "d1", | 
 | 		.gpio			= AT91_PIN_PB2, | 
 | 		.active_low		= 1, | 
 | 		.default_trigger	= "heartbeat", | 
 | 	}, | 
 | }; | 
 |  | 
 | static void __init csb637_board_init(void) | 
 | { | 
 | 	/* LED(s) */ | 
 | 	at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds)); | 
 | 	/* Serial */ | 
 | 	at91_add_device_serial(); | 
 | 	/* Ethernet */ | 
 | 	at91_add_device_eth(&csb637_eth_data); | 
 | 	/* USB Host */ | 
 | 	at91_add_device_usbh(&csb637_usbh_data); | 
 | 	/* USB Device */ | 
 | 	at91_add_device_udc(&csb637_udc_data); | 
 | 	/* I2C */ | 
 | 	at91_add_device_i2c(NULL, 0); | 
 | 	/* SPI */ | 
 | 	at91_add_device_spi(NULL, 0); | 
 | 	/* NOR flash */ | 
 | 	platform_device_register(&csb_flash); | 
 | } | 
 |  | 
 | MACHINE_START(CSB637, "Cogent CSB637") | 
 | 	/* Maintainer: Bill Gatliff */ | 
 | 	.timer		= &at91rm9200_timer, | 
 | 	.map_io		= at91_map_io, | 
 | 	.init_early	= csb637_init_early, | 
 | 	.init_irq	= at91_init_irq_default, | 
 | 	.init_machine	= csb637_board_init, | 
 | MACHINE_END |