| /* | 
 |  *  linux/mm/vmscan.c | 
 |  * | 
 |  *  Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds | 
 |  * | 
 |  *  Swap reorganised 29.12.95, Stephen Tweedie. | 
 |  *  kswapd added: 7.1.96  sct | 
 |  *  Removed kswapd_ctl limits, and swap out as many pages as needed | 
 |  *  to bring the system back to freepages.high: 2.4.97, Rik van Riel. | 
 |  *  Zone aware kswapd started 02/00, Kanoj Sarcar (kanoj@sgi.com). | 
 |  *  Multiqueue VM started 5.8.00, Rik van Riel. | 
 |  */ | 
 |  | 
 | #include <linux/mm.h> | 
 | #include <linux/module.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/kernel_stat.h> | 
 | #include <linux/swap.h> | 
 | #include <linux/pagemap.h> | 
 | #include <linux/init.h> | 
 | #include <linux/highmem.h> | 
 | #include <linux/file.h> | 
 | #include <linux/writeback.h> | 
 | #include <linux/blkdev.h> | 
 | #include <linux/buffer_head.h>	/* for try_to_release_page(), | 
 | 					buffer_heads_over_limit */ | 
 | #include <linux/mm_inline.h> | 
 | #include <linux/pagevec.h> | 
 | #include <linux/backing-dev.h> | 
 | #include <linux/rmap.h> | 
 | #include <linux/topology.h> | 
 | #include <linux/cpu.h> | 
 | #include <linux/cpuset.h> | 
 | #include <linux/notifier.h> | 
 | #include <linux/rwsem.h> | 
 |  | 
 | #include <asm/tlbflush.h> | 
 | #include <asm/div64.h> | 
 |  | 
 | #include <linux/swapops.h> | 
 |  | 
 | /* possible outcome of pageout() */ | 
 | typedef enum { | 
 | 	/* failed to write page out, page is locked */ | 
 | 	PAGE_KEEP, | 
 | 	/* move page to the active list, page is locked */ | 
 | 	PAGE_ACTIVATE, | 
 | 	/* page has been sent to the disk successfully, page is unlocked */ | 
 | 	PAGE_SUCCESS, | 
 | 	/* page is clean and locked */ | 
 | 	PAGE_CLEAN, | 
 | } pageout_t; | 
 |  | 
 | struct scan_control { | 
 | 	/* Ask refill_inactive_zone, or shrink_cache to scan this many pages */ | 
 | 	unsigned long nr_to_scan; | 
 |  | 
 | 	/* Incremented by the number of inactive pages that were scanned */ | 
 | 	unsigned long nr_scanned; | 
 |  | 
 | 	/* Incremented by the number of pages reclaimed */ | 
 | 	unsigned long nr_reclaimed; | 
 |  | 
 | 	unsigned long nr_mapped;	/* From page_state */ | 
 |  | 
 | 	/* Ask shrink_caches, or shrink_zone to scan at this priority */ | 
 | 	unsigned int priority; | 
 |  | 
 | 	/* This context's GFP mask */ | 
 | 	gfp_t gfp_mask; | 
 |  | 
 | 	int may_writepage; | 
 |  | 
 | 	/* Can pages be swapped as part of reclaim? */ | 
 | 	int may_swap; | 
 |  | 
 | 	/* This context's SWAP_CLUSTER_MAX. If freeing memory for | 
 | 	 * suspend, we effectively ignore SWAP_CLUSTER_MAX. | 
 | 	 * In this context, it doesn't matter that we scan the | 
 | 	 * whole list at once. */ | 
 | 	int swap_cluster_max; | 
 | }; | 
 |  | 
 | /* | 
 |  * The list of shrinker callbacks used by to apply pressure to | 
 |  * ageable caches. | 
 |  */ | 
 | struct shrinker { | 
 | 	shrinker_t		shrinker; | 
 | 	struct list_head	list; | 
 | 	int			seeks;	/* seeks to recreate an obj */ | 
 | 	long			nr;	/* objs pending delete */ | 
 | }; | 
 |  | 
 | #define lru_to_page(_head) (list_entry((_head)->prev, struct page, lru)) | 
 |  | 
 | #ifdef ARCH_HAS_PREFETCH | 
 | #define prefetch_prev_lru_page(_page, _base, _field)			\ | 
 | 	do {								\ | 
 | 		if ((_page)->lru.prev != _base) {			\ | 
 | 			struct page *prev;				\ | 
 | 									\ | 
 | 			prev = lru_to_page(&(_page->lru));		\ | 
 | 			prefetch(&prev->_field);			\ | 
 | 		}							\ | 
 | 	} while (0) | 
 | #else | 
 | #define prefetch_prev_lru_page(_page, _base, _field) do { } while (0) | 
 | #endif | 
 |  | 
 | #ifdef ARCH_HAS_PREFETCHW | 
 | #define prefetchw_prev_lru_page(_page, _base, _field)			\ | 
 | 	do {								\ | 
 | 		if ((_page)->lru.prev != _base) {			\ | 
 | 			struct page *prev;				\ | 
 | 									\ | 
 | 			prev = lru_to_page(&(_page->lru));		\ | 
 | 			prefetchw(&prev->_field);			\ | 
 | 		}							\ | 
 | 	} while (0) | 
 | #else | 
 | #define prefetchw_prev_lru_page(_page, _base, _field) do { } while (0) | 
 | #endif | 
 |  | 
 | /* | 
 |  * From 0 .. 100.  Higher means more swappy. | 
 |  */ | 
 | int vm_swappiness = 60; | 
 | static long total_memory; | 
 |  | 
 | static LIST_HEAD(shrinker_list); | 
 | static DECLARE_RWSEM(shrinker_rwsem); | 
 |  | 
 | /* | 
 |  * Add a shrinker callback to be called from the vm | 
 |  */ | 
 | struct shrinker *set_shrinker(int seeks, shrinker_t theshrinker) | 
 | { | 
 |         struct shrinker *shrinker; | 
 |  | 
 |         shrinker = kmalloc(sizeof(*shrinker), GFP_KERNEL); | 
 |         if (shrinker) { | 
 | 	        shrinker->shrinker = theshrinker; | 
 | 	        shrinker->seeks = seeks; | 
 | 	        shrinker->nr = 0; | 
 | 	        down_write(&shrinker_rwsem); | 
 | 	        list_add_tail(&shrinker->list, &shrinker_list); | 
 | 	        up_write(&shrinker_rwsem); | 
 | 	} | 
 | 	return shrinker; | 
 | } | 
 | EXPORT_SYMBOL(set_shrinker); | 
 |  | 
 | /* | 
 |  * Remove one | 
 |  */ | 
 | void remove_shrinker(struct shrinker *shrinker) | 
 | { | 
 | 	down_write(&shrinker_rwsem); | 
 | 	list_del(&shrinker->list); | 
 | 	up_write(&shrinker_rwsem); | 
 | 	kfree(shrinker); | 
 | } | 
 | EXPORT_SYMBOL(remove_shrinker); | 
 |  | 
 | #define SHRINK_BATCH 128 | 
 | /* | 
 |  * Call the shrink functions to age shrinkable caches | 
 |  * | 
 |  * Here we assume it costs one seek to replace a lru page and that it also | 
 |  * takes a seek to recreate a cache object.  With this in mind we age equal | 
 |  * percentages of the lru and ageable caches.  This should balance the seeks | 
 |  * generated by these structures. | 
 |  * | 
 |  * If the vm encounted mapped pages on the LRU it increase the pressure on | 
 |  * slab to avoid swapping. | 
 |  * | 
 |  * We do weird things to avoid (scanned*seeks*entries) overflowing 32 bits. | 
 |  * | 
 |  * `lru_pages' represents the number of on-LRU pages in all the zones which | 
 |  * are eligible for the caller's allocation attempt.  It is used for balancing | 
 |  * slab reclaim versus page reclaim. | 
 |  * | 
 |  * Returns the number of slab objects which we shrunk. | 
 |  */ | 
 | int shrink_slab(unsigned long scanned, gfp_t gfp_mask, unsigned long lru_pages) | 
 | { | 
 | 	struct shrinker *shrinker; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (scanned == 0) | 
 | 		scanned = SWAP_CLUSTER_MAX; | 
 |  | 
 | 	if (!down_read_trylock(&shrinker_rwsem)) | 
 | 		return 1;	/* Assume we'll be able to shrink next time */ | 
 |  | 
 | 	list_for_each_entry(shrinker, &shrinker_list, list) { | 
 | 		unsigned long long delta; | 
 | 		unsigned long total_scan; | 
 | 		unsigned long max_pass = (*shrinker->shrinker)(0, gfp_mask); | 
 |  | 
 | 		delta = (4 * scanned) / shrinker->seeks; | 
 | 		delta *= max_pass; | 
 | 		do_div(delta, lru_pages + 1); | 
 | 		shrinker->nr += delta; | 
 | 		if (shrinker->nr < 0) { | 
 | 			printk(KERN_ERR "%s: nr=%ld\n", | 
 | 					__FUNCTION__, shrinker->nr); | 
 | 			shrinker->nr = max_pass; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Avoid risking looping forever due to too large nr value: | 
 | 		 * never try to free more than twice the estimate number of | 
 | 		 * freeable entries. | 
 | 		 */ | 
 | 		if (shrinker->nr > max_pass * 2) | 
 | 			shrinker->nr = max_pass * 2; | 
 |  | 
 | 		total_scan = shrinker->nr; | 
 | 		shrinker->nr = 0; | 
 |  | 
 | 		while (total_scan >= SHRINK_BATCH) { | 
 | 			long this_scan = SHRINK_BATCH; | 
 | 			int shrink_ret; | 
 | 			int nr_before; | 
 |  | 
 | 			nr_before = (*shrinker->shrinker)(0, gfp_mask); | 
 | 			shrink_ret = (*shrinker->shrinker)(this_scan, gfp_mask); | 
 | 			if (shrink_ret == -1) | 
 | 				break; | 
 | 			if (shrink_ret < nr_before) | 
 | 				ret += nr_before - shrink_ret; | 
 | 			mod_page_state(slabs_scanned, this_scan); | 
 | 			total_scan -= this_scan; | 
 |  | 
 | 			cond_resched(); | 
 | 		} | 
 |  | 
 | 		shrinker->nr += total_scan; | 
 | 	} | 
 | 	up_read(&shrinker_rwsem); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* Called without lock on whether page is mapped, so answer is unstable */ | 
 | static inline int page_mapping_inuse(struct page *page) | 
 | { | 
 | 	struct address_space *mapping; | 
 |  | 
 | 	/* Page is in somebody's page tables. */ | 
 | 	if (page_mapped(page)) | 
 | 		return 1; | 
 |  | 
 | 	/* Be more reluctant to reclaim swapcache than pagecache */ | 
 | 	if (PageSwapCache(page)) | 
 | 		return 1; | 
 |  | 
 | 	mapping = page_mapping(page); | 
 | 	if (!mapping) | 
 | 		return 0; | 
 |  | 
 | 	/* File is mmap'd by somebody? */ | 
 | 	return mapping_mapped(mapping); | 
 | } | 
 |  | 
 | static inline int is_page_cache_freeable(struct page *page) | 
 | { | 
 | 	return page_count(page) - !!PagePrivate(page) == 2; | 
 | } | 
 |  | 
 | static int may_write_to_queue(struct backing_dev_info *bdi) | 
 | { | 
 | 	if (current->flags & PF_SWAPWRITE) | 
 | 		return 1; | 
 | 	if (!bdi_write_congested(bdi)) | 
 | 		return 1; | 
 | 	if (bdi == current->backing_dev_info) | 
 | 		return 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * We detected a synchronous write error writing a page out.  Probably | 
 |  * -ENOSPC.  We need to propagate that into the address_space for a subsequent | 
 |  * fsync(), msync() or close(). | 
 |  * | 
 |  * The tricky part is that after writepage we cannot touch the mapping: nothing | 
 |  * prevents it from being freed up.  But we have a ref on the page and once | 
 |  * that page is locked, the mapping is pinned. | 
 |  * | 
 |  * We're allowed to run sleeping lock_page() here because we know the caller has | 
 |  * __GFP_FS. | 
 |  */ | 
 | static void handle_write_error(struct address_space *mapping, | 
 | 				struct page *page, int error) | 
 | { | 
 | 	lock_page(page); | 
 | 	if (page_mapping(page) == mapping) { | 
 | 		if (error == -ENOSPC) | 
 | 			set_bit(AS_ENOSPC, &mapping->flags); | 
 | 		else | 
 | 			set_bit(AS_EIO, &mapping->flags); | 
 | 	} | 
 | 	unlock_page(page); | 
 | } | 
 |  | 
 | /* | 
 |  * pageout is called by shrink_list() for each dirty page. Calls ->writepage(). | 
 |  */ | 
 | static pageout_t pageout(struct page *page, struct address_space *mapping) | 
 | { | 
 | 	/* | 
 | 	 * If the page is dirty, only perform writeback if that write | 
 | 	 * will be non-blocking.  To prevent this allocation from being | 
 | 	 * stalled by pagecache activity.  But note that there may be | 
 | 	 * stalls if we need to run get_block().  We could test | 
 | 	 * PagePrivate for that. | 
 | 	 * | 
 | 	 * If this process is currently in generic_file_write() against | 
 | 	 * this page's queue, we can perform writeback even if that | 
 | 	 * will block. | 
 | 	 * | 
 | 	 * If the page is swapcache, write it back even if that would | 
 | 	 * block, for some throttling. This happens by accident, because | 
 | 	 * swap_backing_dev_info is bust: it doesn't reflect the | 
 | 	 * congestion state of the swapdevs.  Easy to fix, if needed. | 
 | 	 * See swapfile.c:page_queue_congested(). | 
 | 	 */ | 
 | 	if (!is_page_cache_freeable(page)) | 
 | 		return PAGE_KEEP; | 
 | 	if (!mapping) { | 
 | 		/* | 
 | 		 * Some data journaling orphaned pages can have | 
 | 		 * page->mapping == NULL while being dirty with clean buffers. | 
 | 		 */ | 
 | 		if (PagePrivate(page)) { | 
 | 			if (try_to_free_buffers(page)) { | 
 | 				ClearPageDirty(page); | 
 | 				printk("%s: orphaned page\n", __FUNCTION__); | 
 | 				return PAGE_CLEAN; | 
 | 			} | 
 | 		} | 
 | 		return PAGE_KEEP; | 
 | 	} | 
 | 	if (mapping->a_ops->writepage == NULL) | 
 | 		return PAGE_ACTIVATE; | 
 | 	if (!may_write_to_queue(mapping->backing_dev_info)) | 
 | 		return PAGE_KEEP; | 
 |  | 
 | 	if (clear_page_dirty_for_io(page)) { | 
 | 		int res; | 
 | 		struct writeback_control wbc = { | 
 | 			.sync_mode = WB_SYNC_NONE, | 
 | 			.nr_to_write = SWAP_CLUSTER_MAX, | 
 | 			.nonblocking = 1, | 
 | 			.for_reclaim = 1, | 
 | 		}; | 
 |  | 
 | 		SetPageReclaim(page); | 
 | 		res = mapping->a_ops->writepage(page, &wbc); | 
 | 		if (res < 0) | 
 | 			handle_write_error(mapping, page, res); | 
 | 		if (res == AOP_WRITEPAGE_ACTIVATE) { | 
 | 			ClearPageReclaim(page); | 
 | 			return PAGE_ACTIVATE; | 
 | 		} | 
 | 		if (!PageWriteback(page)) { | 
 | 			/* synchronous write or broken a_ops? */ | 
 | 			ClearPageReclaim(page); | 
 | 		} | 
 |  | 
 | 		return PAGE_SUCCESS; | 
 | 	} | 
 |  | 
 | 	return PAGE_CLEAN; | 
 | } | 
 |  | 
 | static int remove_mapping(struct address_space *mapping, struct page *page) | 
 | { | 
 | 	if (!mapping) | 
 | 		return 0;		/* truncate got there first */ | 
 |  | 
 | 	write_lock_irq(&mapping->tree_lock); | 
 |  | 
 | 	/* | 
 | 	 * The non-racy check for busy page.  It is critical to check | 
 | 	 * PageDirty _after_ making sure that the page is freeable and | 
 | 	 * not in use by anybody. 	(pagecache + us == 2) | 
 | 	 */ | 
 | 	if (unlikely(page_count(page) != 2)) | 
 | 		goto cannot_free; | 
 | 	smp_rmb(); | 
 | 	if (unlikely(PageDirty(page))) | 
 | 		goto cannot_free; | 
 |  | 
 | 	if (PageSwapCache(page)) { | 
 | 		swp_entry_t swap = { .val = page_private(page) }; | 
 | 		__delete_from_swap_cache(page); | 
 | 		write_unlock_irq(&mapping->tree_lock); | 
 | 		swap_free(swap); | 
 | 		__put_page(page);	/* The pagecache ref */ | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	__remove_from_page_cache(page); | 
 | 	write_unlock_irq(&mapping->tree_lock); | 
 | 	__put_page(page); | 
 | 	return 1; | 
 |  | 
 | cannot_free: | 
 | 	write_unlock_irq(&mapping->tree_lock); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * shrink_list adds the number of reclaimed pages to sc->nr_reclaimed | 
 |  */ | 
 | static int shrink_list(struct list_head *page_list, struct scan_control *sc) | 
 | { | 
 | 	LIST_HEAD(ret_pages); | 
 | 	struct pagevec freed_pvec; | 
 | 	int pgactivate = 0; | 
 | 	int reclaimed = 0; | 
 |  | 
 | 	cond_resched(); | 
 |  | 
 | 	pagevec_init(&freed_pvec, 1); | 
 | 	while (!list_empty(page_list)) { | 
 | 		struct address_space *mapping; | 
 | 		struct page *page; | 
 | 		int may_enter_fs; | 
 | 		int referenced; | 
 |  | 
 | 		cond_resched(); | 
 |  | 
 | 		page = lru_to_page(page_list); | 
 | 		list_del(&page->lru); | 
 |  | 
 | 		if (TestSetPageLocked(page)) | 
 | 			goto keep; | 
 |  | 
 | 		BUG_ON(PageActive(page)); | 
 |  | 
 | 		sc->nr_scanned++; | 
 |  | 
 | 		if (!sc->may_swap && page_mapped(page)) | 
 | 			goto keep_locked; | 
 |  | 
 | 		/* Double the slab pressure for mapped and swapcache pages */ | 
 | 		if (page_mapped(page) || PageSwapCache(page)) | 
 | 			sc->nr_scanned++; | 
 |  | 
 | 		if (PageWriteback(page)) | 
 | 			goto keep_locked; | 
 |  | 
 | 		referenced = page_referenced(page, 1); | 
 | 		/* In active use or really unfreeable?  Activate it. */ | 
 | 		if (referenced && page_mapping_inuse(page)) | 
 | 			goto activate_locked; | 
 |  | 
 | #ifdef CONFIG_SWAP | 
 | 		/* | 
 | 		 * Anonymous process memory has backing store? | 
 | 		 * Try to allocate it some swap space here. | 
 | 		 */ | 
 | 		if (PageAnon(page) && !PageSwapCache(page)) { | 
 | 			if (!sc->may_swap) | 
 | 				goto keep_locked; | 
 | 			if (!add_to_swap(page, GFP_ATOMIC)) | 
 | 				goto activate_locked; | 
 | 		} | 
 | #endif /* CONFIG_SWAP */ | 
 |  | 
 | 		mapping = page_mapping(page); | 
 | 		may_enter_fs = (sc->gfp_mask & __GFP_FS) || | 
 | 			(PageSwapCache(page) && (sc->gfp_mask & __GFP_IO)); | 
 |  | 
 | 		/* | 
 | 		 * The page is mapped into the page tables of one or more | 
 | 		 * processes. Try to unmap it here. | 
 | 		 */ | 
 | 		if (page_mapped(page) && mapping) { | 
 | 			/* | 
 | 			 * No unmapping if we do not swap | 
 | 			 */ | 
 | 			if (!sc->may_swap) | 
 | 				goto keep_locked; | 
 |  | 
 | 			switch (try_to_unmap(page, 0)) { | 
 | 			case SWAP_FAIL: | 
 | 				goto activate_locked; | 
 | 			case SWAP_AGAIN: | 
 | 				goto keep_locked; | 
 | 			case SWAP_SUCCESS: | 
 | 				; /* try to free the page below */ | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (PageDirty(page)) { | 
 | 			if (referenced) | 
 | 				goto keep_locked; | 
 | 			if (!may_enter_fs) | 
 | 				goto keep_locked; | 
 | 			if (!sc->may_writepage) | 
 | 				goto keep_locked; | 
 |  | 
 | 			/* Page is dirty, try to write it out here */ | 
 | 			switch(pageout(page, mapping)) { | 
 | 			case PAGE_KEEP: | 
 | 				goto keep_locked; | 
 | 			case PAGE_ACTIVATE: | 
 | 				goto activate_locked; | 
 | 			case PAGE_SUCCESS: | 
 | 				if (PageWriteback(page) || PageDirty(page)) | 
 | 					goto keep; | 
 | 				/* | 
 | 				 * A synchronous write - probably a ramdisk.  Go | 
 | 				 * ahead and try to reclaim the page. | 
 | 				 */ | 
 | 				if (TestSetPageLocked(page)) | 
 | 					goto keep; | 
 | 				if (PageDirty(page) || PageWriteback(page)) | 
 | 					goto keep_locked; | 
 | 				mapping = page_mapping(page); | 
 | 			case PAGE_CLEAN: | 
 | 				; /* try to free the page below */ | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * If the page has buffers, try to free the buffer mappings | 
 | 		 * associated with this page. If we succeed we try to free | 
 | 		 * the page as well. | 
 | 		 * | 
 | 		 * We do this even if the page is PageDirty(). | 
 | 		 * try_to_release_page() does not perform I/O, but it is | 
 | 		 * possible for a page to have PageDirty set, but it is actually | 
 | 		 * clean (all its buffers are clean).  This happens if the | 
 | 		 * buffers were written out directly, with submit_bh(). ext3 | 
 | 		 * will do this, as well as the blockdev mapping.  | 
 | 		 * try_to_release_page() will discover that cleanness and will | 
 | 		 * drop the buffers and mark the page clean - it can be freed. | 
 | 		 * | 
 | 		 * Rarely, pages can have buffers and no ->mapping.  These are | 
 | 		 * the pages which were not successfully invalidated in | 
 | 		 * truncate_complete_page().  We try to drop those buffers here | 
 | 		 * and if that worked, and the page is no longer mapped into | 
 | 		 * process address space (page_count == 1) it can be freed. | 
 | 		 * Otherwise, leave the page on the LRU so it is swappable. | 
 | 		 */ | 
 | 		if (PagePrivate(page)) { | 
 | 			if (!try_to_release_page(page, sc->gfp_mask)) | 
 | 				goto activate_locked; | 
 | 			if (!mapping && page_count(page) == 1) | 
 | 				goto free_it; | 
 | 		} | 
 |  | 
 | 		if (!remove_mapping(mapping, page)) | 
 | 			goto keep_locked; | 
 |  | 
 | free_it: | 
 | 		unlock_page(page); | 
 | 		reclaimed++; | 
 | 		if (!pagevec_add(&freed_pvec, page)) | 
 | 			__pagevec_release_nonlru(&freed_pvec); | 
 | 		continue; | 
 |  | 
 | activate_locked: | 
 | 		SetPageActive(page); | 
 | 		pgactivate++; | 
 | keep_locked: | 
 | 		unlock_page(page); | 
 | keep: | 
 | 		list_add(&page->lru, &ret_pages); | 
 | 		BUG_ON(PageLRU(page)); | 
 | 	} | 
 | 	list_splice(&ret_pages, page_list); | 
 | 	if (pagevec_count(&freed_pvec)) | 
 | 		__pagevec_release_nonlru(&freed_pvec); | 
 | 	mod_page_state(pgactivate, pgactivate); | 
 | 	sc->nr_reclaimed += reclaimed; | 
 | 	return reclaimed; | 
 | } | 
 |  | 
 | #ifdef CONFIG_MIGRATION | 
 | static inline void move_to_lru(struct page *page) | 
 | { | 
 | 	list_del(&page->lru); | 
 | 	if (PageActive(page)) { | 
 | 		/* | 
 | 		 * lru_cache_add_active checks that | 
 | 		 * the PG_active bit is off. | 
 | 		 */ | 
 | 		ClearPageActive(page); | 
 | 		lru_cache_add_active(page); | 
 | 	} else { | 
 | 		lru_cache_add(page); | 
 | 	} | 
 | 	put_page(page); | 
 | } | 
 |  | 
 | /* | 
 |  * Add isolated pages on the list back to the LRU. | 
 |  * | 
 |  * returns the number of pages put back. | 
 |  */ | 
 | int putback_lru_pages(struct list_head *l) | 
 | { | 
 | 	struct page *page; | 
 | 	struct page *page2; | 
 | 	int count = 0; | 
 |  | 
 | 	list_for_each_entry_safe(page, page2, l, lru) { | 
 | 		move_to_lru(page); | 
 | 		count++; | 
 | 	} | 
 | 	return count; | 
 | } | 
 |  | 
 | /* | 
 |  * Non migratable page | 
 |  */ | 
 | int fail_migrate_page(struct page *newpage, struct page *page) | 
 | { | 
 | 	return -EIO; | 
 | } | 
 | EXPORT_SYMBOL(fail_migrate_page); | 
 |  | 
 | /* | 
 |  * swapout a single page | 
 |  * page is locked upon entry, unlocked on exit | 
 |  */ | 
 | static int swap_page(struct page *page) | 
 | { | 
 | 	struct address_space *mapping = page_mapping(page); | 
 |  | 
 | 	if (page_mapped(page) && mapping) | 
 | 		if (try_to_unmap(page, 1) != SWAP_SUCCESS) | 
 | 			goto unlock_retry; | 
 |  | 
 | 	if (PageDirty(page)) { | 
 | 		/* Page is dirty, try to write it out here */ | 
 | 		switch(pageout(page, mapping)) { | 
 | 		case PAGE_KEEP: | 
 | 		case PAGE_ACTIVATE: | 
 | 			goto unlock_retry; | 
 |  | 
 | 		case PAGE_SUCCESS: | 
 | 			goto retry; | 
 |  | 
 | 		case PAGE_CLEAN: | 
 | 			; /* try to free the page below */ | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (PagePrivate(page)) { | 
 | 		if (!try_to_release_page(page, GFP_KERNEL) || | 
 | 		    (!mapping && page_count(page) == 1)) | 
 | 			goto unlock_retry; | 
 | 	} | 
 |  | 
 | 	if (remove_mapping(mapping, page)) { | 
 | 		/* Success */ | 
 | 		unlock_page(page); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | unlock_retry: | 
 | 	unlock_page(page); | 
 |  | 
 | retry: | 
 | 	return -EAGAIN; | 
 | } | 
 | EXPORT_SYMBOL(swap_page); | 
 |  | 
 | /* | 
 |  * Page migration was first developed in the context of the memory hotplug | 
 |  * project. The main authors of the migration code are: | 
 |  * | 
 |  * IWAMOTO Toshihiro <iwamoto@valinux.co.jp> | 
 |  * Hirokazu Takahashi <taka@valinux.co.jp> | 
 |  * Dave Hansen <haveblue@us.ibm.com> | 
 |  * Christoph Lameter <clameter@sgi.com> | 
 |  */ | 
 |  | 
 | /* | 
 |  * Remove references for a page and establish the new page with the correct | 
 |  * basic settings to be able to stop accesses to the page. | 
 |  */ | 
 | int migrate_page_remove_references(struct page *newpage, | 
 | 				struct page *page, int nr_refs) | 
 | { | 
 | 	struct address_space *mapping = page_mapping(page); | 
 | 	struct page **radix_pointer; | 
 |  | 
 | 	/* | 
 | 	 * Avoid doing any of the following work if the page count | 
 | 	 * indicates that the page is in use or truncate has removed | 
 | 	 * the page. | 
 | 	 */ | 
 | 	if (!mapping || page_mapcount(page) + nr_refs != page_count(page)) | 
 | 		return -EAGAIN; | 
 |  | 
 | 	/* | 
 | 	 * Establish swap ptes for anonymous pages or destroy pte | 
 | 	 * maps for files. | 
 | 	 * | 
 | 	 * In order to reestablish file backed mappings the fault handlers | 
 | 	 * will take the radix tree_lock which may then be used to stop | 
 |   	 * processses from accessing this page until the new page is ready. | 
 | 	 * | 
 | 	 * A process accessing via a swap pte (an anonymous page) will take a | 
 | 	 * page_lock on the old page which will block the process until the | 
 | 	 * migration attempt is complete. At that time the PageSwapCache bit | 
 | 	 * will be examined. If the page was migrated then the PageSwapCache | 
 | 	 * bit will be clear and the operation to retrieve the page will be | 
 | 	 * retried which will find the new page in the radix tree. Then a new | 
 | 	 * direct mapping may be generated based on the radix tree contents. | 
 | 	 * | 
 | 	 * If the page was not migrated then the PageSwapCache bit | 
 | 	 * is still set and the operation may continue. | 
 | 	 */ | 
 | 	if (try_to_unmap(page, 1) == SWAP_FAIL) | 
 | 		/* A vma has VM_LOCKED set -> Permanent failure */ | 
 | 		return -EPERM; | 
 |  | 
 | 	/* | 
 | 	 * Give up if we were unable to remove all mappings. | 
 | 	 */ | 
 | 	if (page_mapcount(page)) | 
 | 		return -EAGAIN; | 
 |  | 
 | 	write_lock_irq(&mapping->tree_lock); | 
 |  | 
 | 	radix_pointer = (struct page **)radix_tree_lookup_slot( | 
 | 						&mapping->page_tree, | 
 | 						page_index(page)); | 
 |  | 
 | 	if (!page_mapping(page) || page_count(page) != nr_refs || | 
 | 			*radix_pointer != page) { | 
 | 		write_unlock_irq(&mapping->tree_lock); | 
 | 		return -EAGAIN; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Now we know that no one else is looking at the page. | 
 | 	 * | 
 | 	 * Certain minimal information about a page must be available | 
 | 	 * in order for other subsystems to properly handle the page if they | 
 | 	 * find it through the radix tree update before we are finished | 
 | 	 * copying the page. | 
 | 	 */ | 
 | 	get_page(newpage); | 
 | 	newpage->index = page->index; | 
 | 	newpage->mapping = page->mapping; | 
 | 	if (PageSwapCache(page)) { | 
 | 		SetPageSwapCache(newpage); | 
 | 		set_page_private(newpage, page_private(page)); | 
 | 	} | 
 |  | 
 | 	*radix_pointer = newpage; | 
 | 	__put_page(page); | 
 | 	write_unlock_irq(&mapping->tree_lock); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(migrate_page_remove_references); | 
 |  | 
 | /* | 
 |  * Copy the page to its new location | 
 |  */ | 
 | void migrate_page_copy(struct page *newpage, struct page *page) | 
 | { | 
 | 	copy_highpage(newpage, page); | 
 |  | 
 | 	if (PageError(page)) | 
 | 		SetPageError(newpage); | 
 | 	if (PageReferenced(page)) | 
 | 		SetPageReferenced(newpage); | 
 | 	if (PageUptodate(page)) | 
 | 		SetPageUptodate(newpage); | 
 | 	if (PageActive(page)) | 
 | 		SetPageActive(newpage); | 
 | 	if (PageChecked(page)) | 
 | 		SetPageChecked(newpage); | 
 | 	if (PageMappedToDisk(page)) | 
 | 		SetPageMappedToDisk(newpage); | 
 |  | 
 | 	if (PageDirty(page)) { | 
 | 		clear_page_dirty_for_io(page); | 
 | 		set_page_dirty(newpage); | 
 |  	} | 
 |  | 
 | 	ClearPageSwapCache(page); | 
 | 	ClearPageActive(page); | 
 | 	ClearPagePrivate(page); | 
 | 	set_page_private(page, 0); | 
 | 	page->mapping = NULL; | 
 |  | 
 | 	/* | 
 | 	 * If any waiters have accumulated on the new page then | 
 | 	 * wake them up. | 
 | 	 */ | 
 | 	if (PageWriteback(newpage)) | 
 | 		end_page_writeback(newpage); | 
 | } | 
 | EXPORT_SYMBOL(migrate_page_copy); | 
 |  | 
 | /* | 
 |  * Common logic to directly migrate a single page suitable for | 
 |  * pages that do not use PagePrivate. | 
 |  * | 
 |  * Pages are locked upon entry and exit. | 
 |  */ | 
 | int migrate_page(struct page *newpage, struct page *page) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	BUG_ON(PageWriteback(page));	/* Writeback must be complete */ | 
 |  | 
 | 	rc = migrate_page_remove_references(newpage, page, 2); | 
 |  | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	migrate_page_copy(newpage, page); | 
 |  | 
 | 	/* | 
 | 	 * Remove auxiliary swap entries and replace | 
 | 	 * them with real ptes. | 
 | 	 * | 
 | 	 * Note that a real pte entry will allow processes that are not | 
 | 	 * waiting on the page lock to use the new page via the page tables | 
 | 	 * before the new page is unlocked. | 
 | 	 */ | 
 | 	remove_from_swap(newpage); | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(migrate_page); | 
 |  | 
 | /* | 
 |  * migrate_pages | 
 |  * | 
 |  * Two lists are passed to this function. The first list | 
 |  * contains the pages isolated from the LRU to be migrated. | 
 |  * The second list contains new pages that the pages isolated | 
 |  * can be moved to. If the second list is NULL then all | 
 |  * pages are swapped out. | 
 |  * | 
 |  * The function returns after 10 attempts or if no pages | 
 |  * are movable anymore because to has become empty | 
 |  * or no retryable pages exist anymore. | 
 |  * | 
 |  * Return: Number of pages not migrated when "to" ran empty. | 
 |  */ | 
 | int migrate_pages(struct list_head *from, struct list_head *to, | 
 | 		  struct list_head *moved, struct list_head *failed) | 
 | { | 
 | 	int retry; | 
 | 	int nr_failed = 0; | 
 | 	int pass = 0; | 
 | 	struct page *page; | 
 | 	struct page *page2; | 
 | 	int swapwrite = current->flags & PF_SWAPWRITE; | 
 | 	int rc; | 
 |  | 
 | 	if (!swapwrite) | 
 | 		current->flags |= PF_SWAPWRITE; | 
 |  | 
 | redo: | 
 | 	retry = 0; | 
 |  | 
 | 	list_for_each_entry_safe(page, page2, from, lru) { | 
 | 		struct page *newpage = NULL; | 
 | 		struct address_space *mapping; | 
 |  | 
 | 		cond_resched(); | 
 |  | 
 | 		rc = 0; | 
 | 		if (page_count(page) == 1) | 
 | 			/* page was freed from under us. So we are done. */ | 
 | 			goto next; | 
 |  | 
 | 		if (to && list_empty(to)) | 
 | 			break; | 
 |  | 
 | 		/* | 
 | 		 * Skip locked pages during the first two passes to give the | 
 | 		 * functions holding the lock time to release the page. Later we | 
 | 		 * use lock_page() to have a higher chance of acquiring the | 
 | 		 * lock. | 
 | 		 */ | 
 | 		rc = -EAGAIN; | 
 | 		if (pass > 2) | 
 | 			lock_page(page); | 
 | 		else | 
 | 			if (TestSetPageLocked(page)) | 
 | 				goto next; | 
 |  | 
 | 		/* | 
 | 		 * Only wait on writeback if we have already done a pass where | 
 | 		 * we we may have triggered writeouts for lots of pages. | 
 | 		 */ | 
 | 		if (pass > 0) { | 
 | 			wait_on_page_writeback(page); | 
 | 		} else { | 
 | 			if (PageWriteback(page)) | 
 | 				goto unlock_page; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Anonymous pages must have swap cache references otherwise | 
 | 		 * the information contained in the page maps cannot be | 
 | 		 * preserved. | 
 | 		 */ | 
 | 		if (PageAnon(page) && !PageSwapCache(page)) { | 
 | 			if (!add_to_swap(page, GFP_KERNEL)) { | 
 | 				rc = -ENOMEM; | 
 | 				goto unlock_page; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (!to) { | 
 | 			rc = swap_page(page); | 
 | 			goto next; | 
 | 		} | 
 |  | 
 | 		newpage = lru_to_page(to); | 
 | 		lock_page(newpage); | 
 |  | 
 | 		/* | 
 | 		 * Pages are properly locked and writeback is complete. | 
 | 		 * Try to migrate the page. | 
 | 		 */ | 
 | 		mapping = page_mapping(page); | 
 | 		if (!mapping) | 
 | 			goto unlock_both; | 
 |  | 
 | 		if (mapping->a_ops->migratepage) { | 
 | 			/* | 
 | 			 * Most pages have a mapping and most filesystems | 
 | 			 * should provide a migration function. Anonymous | 
 | 			 * pages are part of swap space which also has its | 
 | 			 * own migration function. This is the most common | 
 | 			 * path for page migration. | 
 | 			 */ | 
 | 			rc = mapping->a_ops->migratepage(newpage, page); | 
 | 			goto unlock_both; | 
 |                 } | 
 |  | 
 | 		/* | 
 | 		 * Default handling if a filesystem does not provide | 
 | 		 * a migration function. We can only migrate clean | 
 | 		 * pages so try to write out any dirty pages first. | 
 | 		 */ | 
 | 		if (PageDirty(page)) { | 
 | 			switch (pageout(page, mapping)) { | 
 | 			case PAGE_KEEP: | 
 | 			case PAGE_ACTIVATE: | 
 | 				goto unlock_both; | 
 |  | 
 | 			case PAGE_SUCCESS: | 
 | 				unlock_page(newpage); | 
 | 				goto next; | 
 |  | 
 | 			case PAGE_CLEAN: | 
 | 				; /* try to migrate the page below */ | 
 | 			} | 
 |                 } | 
 |  | 
 | 		/* | 
 | 		 * Buffers are managed in a filesystem specific way. | 
 | 		 * We must have no buffers or drop them. | 
 | 		 */ | 
 | 		if (!page_has_buffers(page) || | 
 | 		    try_to_release_page(page, GFP_KERNEL)) { | 
 | 			rc = migrate_page(newpage, page); | 
 | 			goto unlock_both; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * On early passes with mapped pages simply | 
 | 		 * retry. There may be a lock held for some | 
 | 		 * buffers that may go away. Later | 
 | 		 * swap them out. | 
 | 		 */ | 
 | 		if (pass > 4) { | 
 | 			/* | 
 | 			 * Persistently unable to drop buffers..... As a | 
 | 			 * measure of last resort we fall back to | 
 | 			 * swap_page(). | 
 | 			 */ | 
 | 			unlock_page(newpage); | 
 | 			newpage = NULL; | 
 | 			rc = swap_page(page); | 
 | 			goto next; | 
 | 		} | 
 |  | 
 | unlock_both: | 
 | 		unlock_page(newpage); | 
 |  | 
 | unlock_page: | 
 | 		unlock_page(page); | 
 |  | 
 | next: | 
 | 		if (rc == -EAGAIN) { | 
 | 			retry++; | 
 | 		} else if (rc) { | 
 | 			/* Permanent failure */ | 
 | 			list_move(&page->lru, failed); | 
 | 			nr_failed++; | 
 | 		} else { | 
 | 			if (newpage) { | 
 | 				/* Successful migration. Return page to LRU */ | 
 | 				move_to_lru(newpage); | 
 | 			} | 
 | 			list_move(&page->lru, moved); | 
 | 		} | 
 | 	} | 
 | 	if (retry && pass++ < 10) | 
 | 		goto redo; | 
 |  | 
 | 	if (!swapwrite) | 
 | 		current->flags &= ~PF_SWAPWRITE; | 
 |  | 
 | 	return nr_failed + retry; | 
 | } | 
 |  | 
 | /* | 
 |  * Isolate one page from the LRU lists and put it on the | 
 |  * indicated list with elevated refcount. | 
 |  * | 
 |  * Result: | 
 |  *  0 = page not on LRU list | 
 |  *  1 = page removed from LRU list and added to the specified list. | 
 |  */ | 
 | int isolate_lru_page(struct page *page) | 
 | { | 
 | 	int ret = 0; | 
 |  | 
 | 	if (PageLRU(page)) { | 
 | 		struct zone *zone = page_zone(page); | 
 | 		spin_lock_irq(&zone->lru_lock); | 
 | 		if (TestClearPageLRU(page)) { | 
 | 			ret = 1; | 
 | 			get_page(page); | 
 | 			if (PageActive(page)) | 
 | 				del_page_from_active_list(zone, page); | 
 | 			else | 
 | 				del_page_from_inactive_list(zone, page); | 
 | 		} | 
 | 		spin_unlock_irq(&zone->lru_lock); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 | #endif | 
 |  | 
 | /* | 
 |  * zone->lru_lock is heavily contended.  Some of the functions that | 
 |  * shrink the lists perform better by taking out a batch of pages | 
 |  * and working on them outside the LRU lock. | 
 |  * | 
 |  * For pagecache intensive workloads, this function is the hottest | 
 |  * spot in the kernel (apart from copy_*_user functions). | 
 |  * | 
 |  * Appropriate locks must be held before calling this function. | 
 |  * | 
 |  * @nr_to_scan:	The number of pages to look through on the list. | 
 |  * @src:	The LRU list to pull pages off. | 
 |  * @dst:	The temp list to put pages on to. | 
 |  * @scanned:	The number of pages that were scanned. | 
 |  * | 
 |  * returns how many pages were moved onto *@dst. | 
 |  */ | 
 | static int isolate_lru_pages(int nr_to_scan, struct list_head *src, | 
 | 			     struct list_head *dst, int *scanned) | 
 | { | 
 | 	int nr_taken = 0; | 
 | 	struct page *page; | 
 | 	int scan = 0; | 
 |  | 
 | 	while (scan++ < nr_to_scan && !list_empty(src)) { | 
 | 		page = lru_to_page(src); | 
 | 		prefetchw_prev_lru_page(page, src, flags); | 
 |  | 
 | 		if (!TestClearPageLRU(page)) | 
 | 			BUG(); | 
 | 		list_del(&page->lru); | 
 | 		if (get_page_testone(page)) { | 
 | 			/* | 
 | 			 * It is being freed elsewhere | 
 | 			 */ | 
 | 			__put_page(page); | 
 | 			SetPageLRU(page); | 
 | 			list_add(&page->lru, src); | 
 | 			continue; | 
 | 		} else { | 
 | 			list_add(&page->lru, dst); | 
 | 			nr_taken++; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	*scanned = scan; | 
 | 	return nr_taken; | 
 | } | 
 |  | 
 | /* | 
 |  * shrink_cache() adds the number of pages reclaimed to sc->nr_reclaimed | 
 |  */ | 
 | static void shrink_cache(struct zone *zone, struct scan_control *sc) | 
 | { | 
 | 	LIST_HEAD(page_list); | 
 | 	struct pagevec pvec; | 
 | 	int max_scan = sc->nr_to_scan; | 
 |  | 
 | 	pagevec_init(&pvec, 1); | 
 |  | 
 | 	lru_add_drain(); | 
 | 	spin_lock_irq(&zone->lru_lock); | 
 | 	while (max_scan > 0) { | 
 | 		struct page *page; | 
 | 		int nr_taken; | 
 | 		int nr_scan; | 
 | 		int nr_freed; | 
 |  | 
 | 		nr_taken = isolate_lru_pages(sc->swap_cluster_max, | 
 | 					     &zone->inactive_list, | 
 | 					     &page_list, &nr_scan); | 
 | 		zone->nr_inactive -= nr_taken; | 
 | 		zone->pages_scanned += nr_scan; | 
 | 		spin_unlock_irq(&zone->lru_lock); | 
 |  | 
 | 		if (nr_taken == 0) | 
 | 			goto done; | 
 |  | 
 | 		max_scan -= nr_scan; | 
 | 		nr_freed = shrink_list(&page_list, sc); | 
 |  | 
 | 		local_irq_disable(); | 
 | 		if (current_is_kswapd()) { | 
 | 			__mod_page_state_zone(zone, pgscan_kswapd, nr_scan); | 
 | 			__mod_page_state(kswapd_steal, nr_freed); | 
 | 		} else | 
 | 			__mod_page_state_zone(zone, pgscan_direct, nr_scan); | 
 | 		__mod_page_state_zone(zone, pgsteal, nr_freed); | 
 |  | 
 | 		spin_lock(&zone->lru_lock); | 
 | 		/* | 
 | 		 * Put back any unfreeable pages. | 
 | 		 */ | 
 | 		while (!list_empty(&page_list)) { | 
 | 			page = lru_to_page(&page_list); | 
 | 			if (TestSetPageLRU(page)) | 
 | 				BUG(); | 
 | 			list_del(&page->lru); | 
 | 			if (PageActive(page)) | 
 | 				add_page_to_active_list(zone, page); | 
 | 			else | 
 | 				add_page_to_inactive_list(zone, page); | 
 | 			if (!pagevec_add(&pvec, page)) { | 
 | 				spin_unlock_irq(&zone->lru_lock); | 
 | 				__pagevec_release(&pvec); | 
 | 				spin_lock_irq(&zone->lru_lock); | 
 | 			} | 
 | 		} | 
 |   	} | 
 | 	spin_unlock_irq(&zone->lru_lock); | 
 | done: | 
 | 	pagevec_release(&pvec); | 
 | } | 
 |  | 
 | /* | 
 |  * This moves pages from the active list to the inactive list. | 
 |  * | 
 |  * We move them the other way if the page is referenced by one or more | 
 |  * processes, from rmap. | 
 |  * | 
 |  * If the pages are mostly unmapped, the processing is fast and it is | 
 |  * appropriate to hold zone->lru_lock across the whole operation.  But if | 
 |  * the pages are mapped, the processing is slow (page_referenced()) so we | 
 |  * should drop zone->lru_lock around each page.  It's impossible to balance | 
 |  * this, so instead we remove the pages from the LRU while processing them. | 
 |  * It is safe to rely on PG_active against the non-LRU pages in here because | 
 |  * nobody will play with that bit on a non-LRU page. | 
 |  * | 
 |  * The downside is that we have to touch page->_count against each page. | 
 |  * But we had to alter page->flags anyway. | 
 |  */ | 
 | static void | 
 | refill_inactive_zone(struct zone *zone, struct scan_control *sc) | 
 | { | 
 | 	int pgmoved; | 
 | 	int pgdeactivate = 0; | 
 | 	int pgscanned; | 
 | 	int nr_pages = sc->nr_to_scan; | 
 | 	LIST_HEAD(l_hold);	/* The pages which were snipped off */ | 
 | 	LIST_HEAD(l_inactive);	/* Pages to go onto the inactive_list */ | 
 | 	LIST_HEAD(l_active);	/* Pages to go onto the active_list */ | 
 | 	struct page *page; | 
 | 	struct pagevec pvec; | 
 | 	int reclaim_mapped = 0; | 
 |  | 
 | 	if (unlikely(sc->may_swap)) { | 
 | 		long mapped_ratio; | 
 | 		long distress; | 
 | 		long swap_tendency; | 
 |  | 
 | 		/* | 
 | 		 * `distress' is a measure of how much trouble we're having | 
 | 		 * reclaiming pages.  0 -> no problems.  100 -> great trouble. | 
 | 		 */ | 
 | 		distress = 100 >> zone->prev_priority; | 
 |  | 
 | 		/* | 
 | 		 * The point of this algorithm is to decide when to start | 
 | 		 * reclaiming mapped memory instead of just pagecache.  Work out | 
 | 		 * how much memory | 
 | 		 * is mapped. | 
 | 		 */ | 
 | 		mapped_ratio = (sc->nr_mapped * 100) / total_memory; | 
 |  | 
 | 		/* | 
 | 		 * Now decide how much we really want to unmap some pages.  The | 
 | 		 * mapped ratio is downgraded - just because there's a lot of | 
 | 		 * mapped memory doesn't necessarily mean that page reclaim | 
 | 		 * isn't succeeding. | 
 | 		 * | 
 | 		 * The distress ratio is important - we don't want to start | 
 | 		 * going oom. | 
 | 		 * | 
 | 		 * A 100% value of vm_swappiness overrides this algorithm | 
 | 		 * altogether. | 
 | 		 */ | 
 | 		swap_tendency = mapped_ratio / 2 + distress + vm_swappiness; | 
 |  | 
 | 		/* | 
 | 		 * Now use this metric to decide whether to start moving mapped | 
 | 		 * memory onto the inactive list. | 
 | 		 */ | 
 | 		if (swap_tendency >= 100) | 
 | 			reclaim_mapped = 1; | 
 | 	} | 
 |  | 
 | 	lru_add_drain(); | 
 | 	spin_lock_irq(&zone->lru_lock); | 
 | 	pgmoved = isolate_lru_pages(nr_pages, &zone->active_list, | 
 | 				    &l_hold, &pgscanned); | 
 | 	zone->pages_scanned += pgscanned; | 
 | 	zone->nr_active -= pgmoved; | 
 | 	spin_unlock_irq(&zone->lru_lock); | 
 |  | 
 | 	while (!list_empty(&l_hold)) { | 
 | 		cond_resched(); | 
 | 		page = lru_to_page(&l_hold); | 
 | 		list_del(&page->lru); | 
 | 		if (page_mapped(page)) { | 
 | 			if (!reclaim_mapped || | 
 | 			    (total_swap_pages == 0 && PageAnon(page)) || | 
 | 			    page_referenced(page, 0)) { | 
 | 				list_add(&page->lru, &l_active); | 
 | 				continue; | 
 | 			} | 
 | 		} | 
 | 		list_add(&page->lru, &l_inactive); | 
 | 	} | 
 |  | 
 | 	pagevec_init(&pvec, 1); | 
 | 	pgmoved = 0; | 
 | 	spin_lock_irq(&zone->lru_lock); | 
 | 	while (!list_empty(&l_inactive)) { | 
 | 		page = lru_to_page(&l_inactive); | 
 | 		prefetchw_prev_lru_page(page, &l_inactive, flags); | 
 | 		if (TestSetPageLRU(page)) | 
 | 			BUG(); | 
 | 		if (!TestClearPageActive(page)) | 
 | 			BUG(); | 
 | 		list_move(&page->lru, &zone->inactive_list); | 
 | 		pgmoved++; | 
 | 		if (!pagevec_add(&pvec, page)) { | 
 | 			zone->nr_inactive += pgmoved; | 
 | 			spin_unlock_irq(&zone->lru_lock); | 
 | 			pgdeactivate += pgmoved; | 
 | 			pgmoved = 0; | 
 | 			if (buffer_heads_over_limit) | 
 | 				pagevec_strip(&pvec); | 
 | 			__pagevec_release(&pvec); | 
 | 			spin_lock_irq(&zone->lru_lock); | 
 | 		} | 
 | 	} | 
 | 	zone->nr_inactive += pgmoved; | 
 | 	pgdeactivate += pgmoved; | 
 | 	if (buffer_heads_over_limit) { | 
 | 		spin_unlock_irq(&zone->lru_lock); | 
 | 		pagevec_strip(&pvec); | 
 | 		spin_lock_irq(&zone->lru_lock); | 
 | 	} | 
 |  | 
 | 	pgmoved = 0; | 
 | 	while (!list_empty(&l_active)) { | 
 | 		page = lru_to_page(&l_active); | 
 | 		prefetchw_prev_lru_page(page, &l_active, flags); | 
 | 		if (TestSetPageLRU(page)) | 
 | 			BUG(); | 
 | 		BUG_ON(!PageActive(page)); | 
 | 		list_move(&page->lru, &zone->active_list); | 
 | 		pgmoved++; | 
 | 		if (!pagevec_add(&pvec, page)) { | 
 | 			zone->nr_active += pgmoved; | 
 | 			pgmoved = 0; | 
 | 			spin_unlock_irq(&zone->lru_lock); | 
 | 			__pagevec_release(&pvec); | 
 | 			spin_lock_irq(&zone->lru_lock); | 
 | 		} | 
 | 	} | 
 | 	zone->nr_active += pgmoved; | 
 | 	spin_unlock(&zone->lru_lock); | 
 |  | 
 | 	__mod_page_state_zone(zone, pgrefill, pgscanned); | 
 | 	__mod_page_state(pgdeactivate, pgdeactivate); | 
 | 	local_irq_enable(); | 
 |  | 
 | 	pagevec_release(&pvec); | 
 | } | 
 |  | 
 | /* | 
 |  * This is a basic per-zone page freer.  Used by both kswapd and direct reclaim. | 
 |  */ | 
 | static void | 
 | shrink_zone(struct zone *zone, struct scan_control *sc) | 
 | { | 
 | 	unsigned long nr_active; | 
 | 	unsigned long nr_inactive; | 
 |  | 
 | 	atomic_inc(&zone->reclaim_in_progress); | 
 |  | 
 | 	/* | 
 | 	 * Add one to `nr_to_scan' just to make sure that the kernel will | 
 | 	 * slowly sift through the active list. | 
 | 	 */ | 
 | 	zone->nr_scan_active += (zone->nr_active >> sc->priority) + 1; | 
 | 	nr_active = zone->nr_scan_active; | 
 | 	if (nr_active >= sc->swap_cluster_max) | 
 | 		zone->nr_scan_active = 0; | 
 | 	else | 
 | 		nr_active = 0; | 
 |  | 
 | 	zone->nr_scan_inactive += (zone->nr_inactive >> sc->priority) + 1; | 
 | 	nr_inactive = zone->nr_scan_inactive; | 
 | 	if (nr_inactive >= sc->swap_cluster_max) | 
 | 		zone->nr_scan_inactive = 0; | 
 | 	else | 
 | 		nr_inactive = 0; | 
 |  | 
 | 	while (nr_active || nr_inactive) { | 
 | 		if (nr_active) { | 
 | 			sc->nr_to_scan = min(nr_active, | 
 | 					(unsigned long)sc->swap_cluster_max); | 
 | 			nr_active -= sc->nr_to_scan; | 
 | 			refill_inactive_zone(zone, sc); | 
 | 		} | 
 |  | 
 | 		if (nr_inactive) { | 
 | 			sc->nr_to_scan = min(nr_inactive, | 
 | 					(unsigned long)sc->swap_cluster_max); | 
 | 			nr_inactive -= sc->nr_to_scan; | 
 | 			shrink_cache(zone, sc); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	throttle_vm_writeout(); | 
 |  | 
 | 	atomic_dec(&zone->reclaim_in_progress); | 
 | } | 
 |  | 
 | /* | 
 |  * This is the direct reclaim path, for page-allocating processes.  We only | 
 |  * try to reclaim pages from zones which will satisfy the caller's allocation | 
 |  * request. | 
 |  * | 
 |  * We reclaim from a zone even if that zone is over pages_high.  Because: | 
 |  * a) The caller may be trying to free *extra* pages to satisfy a higher-order | 
 |  *    allocation or | 
 |  * b) The zones may be over pages_high but they must go *over* pages_high to | 
 |  *    satisfy the `incremental min' zone defense algorithm. | 
 |  * | 
 |  * Returns the number of reclaimed pages. | 
 |  * | 
 |  * If a zone is deemed to be full of pinned pages then just give it a light | 
 |  * scan then give up on it. | 
 |  */ | 
 | static void | 
 | shrink_caches(struct zone **zones, struct scan_control *sc) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; zones[i] != NULL; i++) { | 
 | 		struct zone *zone = zones[i]; | 
 |  | 
 | 		if (!populated_zone(zone)) | 
 | 			continue; | 
 |  | 
 | 		if (!cpuset_zone_allowed(zone, __GFP_HARDWALL)) | 
 | 			continue; | 
 |  | 
 | 		zone->temp_priority = sc->priority; | 
 | 		if (zone->prev_priority > sc->priority) | 
 | 			zone->prev_priority = sc->priority; | 
 |  | 
 | 		if (zone->all_unreclaimable && sc->priority != DEF_PRIORITY) | 
 | 			continue;	/* Let kswapd poll it */ | 
 |  | 
 | 		shrink_zone(zone, sc); | 
 | 	} | 
 | } | 
 |   | 
 | /* | 
 |  * This is the main entry point to direct page reclaim. | 
 |  * | 
 |  * If a full scan of the inactive list fails to free enough memory then we | 
 |  * are "out of memory" and something needs to be killed. | 
 |  * | 
 |  * If the caller is !__GFP_FS then the probability of a failure is reasonably | 
 |  * high - the zone may be full of dirty or under-writeback pages, which this | 
 |  * caller can't do much about.  We kick pdflush and take explicit naps in the | 
 |  * hope that some of these pages can be written.  But if the allocating task | 
 |  * holds filesystem locks which prevent writeout this might not work, and the | 
 |  * allocation attempt will fail. | 
 |  */ | 
 | int try_to_free_pages(struct zone **zones, gfp_t gfp_mask) | 
 | { | 
 | 	int priority; | 
 | 	int ret = 0; | 
 | 	int total_scanned = 0, total_reclaimed = 0; | 
 | 	struct reclaim_state *reclaim_state = current->reclaim_state; | 
 | 	struct scan_control sc; | 
 | 	unsigned long lru_pages = 0; | 
 | 	int i; | 
 |  | 
 | 	sc.gfp_mask = gfp_mask; | 
 | 	sc.may_writepage = !laptop_mode; | 
 | 	sc.may_swap = 1; | 
 |  | 
 | 	inc_page_state(allocstall); | 
 |  | 
 | 	for (i = 0; zones[i] != NULL; i++) { | 
 | 		struct zone *zone = zones[i]; | 
 |  | 
 | 		if (!cpuset_zone_allowed(zone, __GFP_HARDWALL)) | 
 | 			continue; | 
 |  | 
 | 		zone->temp_priority = DEF_PRIORITY; | 
 | 		lru_pages += zone->nr_active + zone->nr_inactive; | 
 | 	} | 
 |  | 
 | 	for (priority = DEF_PRIORITY; priority >= 0; priority--) { | 
 | 		sc.nr_mapped = read_page_state(nr_mapped); | 
 | 		sc.nr_scanned = 0; | 
 | 		sc.nr_reclaimed = 0; | 
 | 		sc.priority = priority; | 
 | 		sc.swap_cluster_max = SWAP_CLUSTER_MAX; | 
 | 		if (!priority) | 
 | 			disable_swap_token(); | 
 | 		shrink_caches(zones, &sc); | 
 | 		shrink_slab(sc.nr_scanned, gfp_mask, lru_pages); | 
 | 		if (reclaim_state) { | 
 | 			sc.nr_reclaimed += reclaim_state->reclaimed_slab; | 
 | 			reclaim_state->reclaimed_slab = 0; | 
 | 		} | 
 | 		total_scanned += sc.nr_scanned; | 
 | 		total_reclaimed += sc.nr_reclaimed; | 
 | 		if (total_reclaimed >= sc.swap_cluster_max) { | 
 | 			ret = 1; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Try to write back as many pages as we just scanned.  This | 
 | 		 * tends to cause slow streaming writers to write data to the | 
 | 		 * disk smoothly, at the dirtying rate, which is nice.   But | 
 | 		 * that's undesirable in laptop mode, where we *want* lumpy | 
 | 		 * writeout.  So in laptop mode, write out the whole world. | 
 | 		 */ | 
 | 		if (total_scanned > sc.swap_cluster_max + sc.swap_cluster_max/2) { | 
 | 			wakeup_pdflush(laptop_mode ? 0 : total_scanned); | 
 | 			sc.may_writepage = 1; | 
 | 		} | 
 |  | 
 | 		/* Take a nap, wait for some writeback to complete */ | 
 | 		if (sc.nr_scanned && priority < DEF_PRIORITY - 2) | 
 | 			blk_congestion_wait(WRITE, HZ/10); | 
 | 	} | 
 | out: | 
 | 	for (i = 0; zones[i] != 0; i++) { | 
 | 		struct zone *zone = zones[i]; | 
 |  | 
 | 		if (!cpuset_zone_allowed(zone, __GFP_HARDWALL)) | 
 | 			continue; | 
 |  | 
 | 		zone->prev_priority = zone->temp_priority; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * For kswapd, balance_pgdat() will work across all this node's zones until | 
 |  * they are all at pages_high. | 
 |  * | 
 |  * If `nr_pages' is non-zero then it is the number of pages which are to be | 
 |  * reclaimed, regardless of the zone occupancies.  This is a software suspend | 
 |  * special. | 
 |  * | 
 |  * Returns the number of pages which were actually freed. | 
 |  * | 
 |  * There is special handling here for zones which are full of pinned pages. | 
 |  * This can happen if the pages are all mlocked, or if they are all used by | 
 |  * device drivers (say, ZONE_DMA).  Or if they are all in use by hugetlb. | 
 |  * What we do is to detect the case where all pages in the zone have been | 
 |  * scanned twice and there has been zero successful reclaim.  Mark the zone as | 
 |  * dead and from now on, only perform a short scan.  Basically we're polling | 
 |  * the zone for when the problem goes away. | 
 |  * | 
 |  * kswapd scans the zones in the highmem->normal->dma direction.  It skips | 
 |  * zones which have free_pages > pages_high, but once a zone is found to have | 
 |  * free_pages <= pages_high, we scan that zone and the lower zones regardless | 
 |  * of the number of free pages in the lower zones.  This interoperates with | 
 |  * the page allocator fallback scheme to ensure that aging of pages is balanced | 
 |  * across the zones. | 
 |  */ | 
 | static int balance_pgdat(pg_data_t *pgdat, int nr_pages, int order) | 
 | { | 
 | 	int to_free = nr_pages; | 
 | 	int all_zones_ok; | 
 | 	int priority; | 
 | 	int i; | 
 | 	int total_scanned, total_reclaimed; | 
 | 	struct reclaim_state *reclaim_state = current->reclaim_state; | 
 | 	struct scan_control sc; | 
 |  | 
 | loop_again: | 
 | 	total_scanned = 0; | 
 | 	total_reclaimed = 0; | 
 | 	sc.gfp_mask = GFP_KERNEL; | 
 | 	sc.may_writepage = !laptop_mode; | 
 | 	sc.may_swap = 1; | 
 | 	sc.nr_mapped = read_page_state(nr_mapped); | 
 |  | 
 | 	inc_page_state(pageoutrun); | 
 |  | 
 | 	for (i = 0; i < pgdat->nr_zones; i++) { | 
 | 		struct zone *zone = pgdat->node_zones + i; | 
 |  | 
 | 		zone->temp_priority = DEF_PRIORITY; | 
 | 	} | 
 |  | 
 | 	for (priority = DEF_PRIORITY; priority >= 0; priority--) { | 
 | 		int end_zone = 0;	/* Inclusive.  0 = ZONE_DMA */ | 
 | 		unsigned long lru_pages = 0; | 
 |  | 
 | 		/* The swap token gets in the way of swapout... */ | 
 | 		if (!priority) | 
 | 			disable_swap_token(); | 
 |  | 
 | 		all_zones_ok = 1; | 
 |  | 
 | 		if (nr_pages == 0) { | 
 | 			/* | 
 | 			 * Scan in the highmem->dma direction for the highest | 
 | 			 * zone which needs scanning | 
 | 			 */ | 
 | 			for (i = pgdat->nr_zones - 1; i >= 0; i--) { | 
 | 				struct zone *zone = pgdat->node_zones + i; | 
 |  | 
 | 				if (!populated_zone(zone)) | 
 | 					continue; | 
 |  | 
 | 				if (zone->all_unreclaimable && | 
 | 						priority != DEF_PRIORITY) | 
 | 					continue; | 
 |  | 
 | 				if (!zone_watermark_ok(zone, order, | 
 | 						zone->pages_high, 0, 0)) { | 
 | 					end_zone = i; | 
 | 					goto scan; | 
 | 				} | 
 | 			} | 
 | 			goto out; | 
 | 		} else { | 
 | 			end_zone = pgdat->nr_zones - 1; | 
 | 		} | 
 | scan: | 
 | 		for (i = 0; i <= end_zone; i++) { | 
 | 			struct zone *zone = pgdat->node_zones + i; | 
 |  | 
 | 			lru_pages += zone->nr_active + zone->nr_inactive; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Now scan the zone in the dma->highmem direction, stopping | 
 | 		 * at the last zone which needs scanning. | 
 | 		 * | 
 | 		 * We do this because the page allocator works in the opposite | 
 | 		 * direction.  This prevents the page allocator from allocating | 
 | 		 * pages behind kswapd's direction of progress, which would | 
 | 		 * cause too much scanning of the lower zones. | 
 | 		 */ | 
 | 		for (i = 0; i <= end_zone; i++) { | 
 | 			struct zone *zone = pgdat->node_zones + i; | 
 | 			int nr_slab; | 
 |  | 
 | 			if (!populated_zone(zone)) | 
 | 				continue; | 
 |  | 
 | 			if (zone->all_unreclaimable && priority != DEF_PRIORITY) | 
 | 				continue; | 
 |  | 
 | 			if (nr_pages == 0) {	/* Not software suspend */ | 
 | 				if (!zone_watermark_ok(zone, order, | 
 | 						zone->pages_high, end_zone, 0)) | 
 | 					all_zones_ok = 0; | 
 | 			} | 
 | 			zone->temp_priority = priority; | 
 | 			if (zone->prev_priority > priority) | 
 | 				zone->prev_priority = priority; | 
 | 			sc.nr_scanned = 0; | 
 | 			sc.nr_reclaimed = 0; | 
 | 			sc.priority = priority; | 
 | 			sc.swap_cluster_max = nr_pages? nr_pages : SWAP_CLUSTER_MAX; | 
 | 			shrink_zone(zone, &sc); | 
 | 			reclaim_state->reclaimed_slab = 0; | 
 | 			nr_slab = shrink_slab(sc.nr_scanned, GFP_KERNEL, | 
 | 						lru_pages); | 
 | 			sc.nr_reclaimed += reclaim_state->reclaimed_slab; | 
 | 			total_reclaimed += sc.nr_reclaimed; | 
 | 			total_scanned += sc.nr_scanned; | 
 | 			if (zone->all_unreclaimable) | 
 | 				continue; | 
 | 			if (nr_slab == 0 && zone->pages_scanned >= | 
 | 				    (zone->nr_active + zone->nr_inactive) * 4) | 
 | 				zone->all_unreclaimable = 1; | 
 | 			/* | 
 | 			 * If we've done a decent amount of scanning and | 
 | 			 * the reclaim ratio is low, start doing writepage | 
 | 			 * even in laptop mode | 
 | 			 */ | 
 | 			if (total_scanned > SWAP_CLUSTER_MAX * 2 && | 
 | 			    total_scanned > total_reclaimed+total_reclaimed/2) | 
 | 				sc.may_writepage = 1; | 
 | 		} | 
 | 		if (nr_pages && to_free > total_reclaimed) | 
 | 			continue;	/* swsusp: need to do more work */ | 
 | 		if (all_zones_ok) | 
 | 			break;		/* kswapd: all done */ | 
 | 		/* | 
 | 		 * OK, kswapd is getting into trouble.  Take a nap, then take | 
 | 		 * another pass across the zones. | 
 | 		 */ | 
 | 		if (total_scanned && priority < DEF_PRIORITY - 2) | 
 | 			blk_congestion_wait(WRITE, HZ/10); | 
 |  | 
 | 		/* | 
 | 		 * We do this so kswapd doesn't build up large priorities for | 
 | 		 * example when it is freeing in parallel with allocators. It | 
 | 		 * matches the direct reclaim path behaviour in terms of impact | 
 | 		 * on zone->*_priority. | 
 | 		 */ | 
 | 		if ((total_reclaimed >= SWAP_CLUSTER_MAX) && (!nr_pages)) | 
 | 			break; | 
 | 	} | 
 | out: | 
 | 	for (i = 0; i < pgdat->nr_zones; i++) { | 
 | 		struct zone *zone = pgdat->node_zones + i; | 
 |  | 
 | 		zone->prev_priority = zone->temp_priority; | 
 | 	} | 
 | 	if (!all_zones_ok) { | 
 | 		cond_resched(); | 
 | 		goto loop_again; | 
 | 	} | 
 |  | 
 | 	return total_reclaimed; | 
 | } | 
 |  | 
 | /* | 
 |  * The background pageout daemon, started as a kernel thread | 
 |  * from the init process.  | 
 |  * | 
 |  * This basically trickles out pages so that we have _some_ | 
 |  * free memory available even if there is no other activity | 
 |  * that frees anything up. This is needed for things like routing | 
 |  * etc, where we otherwise might have all activity going on in | 
 |  * asynchronous contexts that cannot page things out. | 
 |  * | 
 |  * If there are applications that are active memory-allocators | 
 |  * (most normal use), this basically shouldn't matter. | 
 |  */ | 
 | static int kswapd(void *p) | 
 | { | 
 | 	unsigned long order; | 
 | 	pg_data_t *pgdat = (pg_data_t*)p; | 
 | 	struct task_struct *tsk = current; | 
 | 	DEFINE_WAIT(wait); | 
 | 	struct reclaim_state reclaim_state = { | 
 | 		.reclaimed_slab = 0, | 
 | 	}; | 
 | 	cpumask_t cpumask; | 
 |  | 
 | 	daemonize("kswapd%d", pgdat->node_id); | 
 | 	cpumask = node_to_cpumask(pgdat->node_id); | 
 | 	if (!cpus_empty(cpumask)) | 
 | 		set_cpus_allowed(tsk, cpumask); | 
 | 	current->reclaim_state = &reclaim_state; | 
 |  | 
 | 	/* | 
 | 	 * Tell the memory management that we're a "memory allocator", | 
 | 	 * and that if we need more memory we should get access to it | 
 | 	 * regardless (see "__alloc_pages()"). "kswapd" should | 
 | 	 * never get caught in the normal page freeing logic. | 
 | 	 * | 
 | 	 * (Kswapd normally doesn't need memory anyway, but sometimes | 
 | 	 * you need a small amount of memory in order to be able to | 
 | 	 * page out something else, and this flag essentially protects | 
 | 	 * us from recursively trying to free more memory as we're | 
 | 	 * trying to free the first piece of memory in the first place). | 
 | 	 */ | 
 | 	tsk->flags |= PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD; | 
 |  | 
 | 	order = 0; | 
 | 	for ( ; ; ) { | 
 | 		unsigned long new_order; | 
 |  | 
 | 		try_to_freeze(); | 
 |  | 
 | 		prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE); | 
 | 		new_order = pgdat->kswapd_max_order; | 
 | 		pgdat->kswapd_max_order = 0; | 
 | 		if (order < new_order) { | 
 | 			/* | 
 | 			 * Don't sleep if someone wants a larger 'order' | 
 | 			 * allocation | 
 | 			 */ | 
 | 			order = new_order; | 
 | 		} else { | 
 | 			schedule(); | 
 | 			order = pgdat->kswapd_max_order; | 
 | 		} | 
 | 		finish_wait(&pgdat->kswapd_wait, &wait); | 
 |  | 
 | 		balance_pgdat(pgdat, 0, order); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * A zone is low on free memory, so wake its kswapd task to service it. | 
 |  */ | 
 | void wakeup_kswapd(struct zone *zone, int order) | 
 | { | 
 | 	pg_data_t *pgdat; | 
 |  | 
 | 	if (!populated_zone(zone)) | 
 | 		return; | 
 |  | 
 | 	pgdat = zone->zone_pgdat; | 
 | 	if (zone_watermark_ok(zone, order, zone->pages_low, 0, 0)) | 
 | 		return; | 
 | 	if (pgdat->kswapd_max_order < order) | 
 | 		pgdat->kswapd_max_order = order; | 
 | 	if (!cpuset_zone_allowed(zone, __GFP_HARDWALL)) | 
 | 		return; | 
 | 	if (!waitqueue_active(&pgdat->kswapd_wait)) | 
 | 		return; | 
 | 	wake_up_interruptible(&pgdat->kswapd_wait); | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | /* | 
 |  * Try to free `nr_pages' of memory, system-wide.  Returns the number of freed | 
 |  * pages. | 
 |  */ | 
 | int shrink_all_memory(int nr_pages) | 
 | { | 
 | 	pg_data_t *pgdat; | 
 | 	int nr_to_free = nr_pages; | 
 | 	int ret = 0; | 
 | 	struct reclaim_state reclaim_state = { | 
 | 		.reclaimed_slab = 0, | 
 | 	}; | 
 |  | 
 | 	current->reclaim_state = &reclaim_state; | 
 | 	for_each_pgdat(pgdat) { | 
 | 		int freed; | 
 | 		freed = balance_pgdat(pgdat, nr_to_free, 0); | 
 | 		ret += freed; | 
 | 		nr_to_free -= freed; | 
 | 		if (nr_to_free <= 0) | 
 | 			break; | 
 | 	} | 
 | 	current->reclaim_state = NULL; | 
 | 	return ret; | 
 | } | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_HOTPLUG_CPU | 
 | /* It's optimal to keep kswapds on the same CPUs as their memory, but | 
 |    not required for correctness.  So if the last cpu in a node goes | 
 |    away, we get changed to run anywhere: as the first one comes back, | 
 |    restore their cpu bindings. */ | 
 | static int __devinit cpu_callback(struct notifier_block *nfb, | 
 | 				  unsigned long action, | 
 | 				  void *hcpu) | 
 | { | 
 | 	pg_data_t *pgdat; | 
 | 	cpumask_t mask; | 
 |  | 
 | 	if (action == CPU_ONLINE) { | 
 | 		for_each_pgdat(pgdat) { | 
 | 			mask = node_to_cpumask(pgdat->node_id); | 
 | 			if (any_online_cpu(mask) != NR_CPUS) | 
 | 				/* One of our CPUs online: restore mask */ | 
 | 				set_cpus_allowed(pgdat->kswapd, mask); | 
 | 		} | 
 | 	} | 
 | 	return NOTIFY_OK; | 
 | } | 
 | #endif /* CONFIG_HOTPLUG_CPU */ | 
 |  | 
 | static int __init kswapd_init(void) | 
 | { | 
 | 	pg_data_t *pgdat; | 
 | 	swap_setup(); | 
 | 	for_each_pgdat(pgdat) | 
 | 		pgdat->kswapd | 
 | 		= find_task_by_pid(kernel_thread(kswapd, pgdat, CLONE_KERNEL)); | 
 | 	total_memory = nr_free_pagecache_pages(); | 
 | 	hotcpu_notifier(cpu_callback, 0); | 
 | 	return 0; | 
 | } | 
 |  | 
 | module_init(kswapd_init) | 
 |  | 
 | #ifdef CONFIG_NUMA | 
 | /* | 
 |  * Zone reclaim mode | 
 |  * | 
 |  * If non-zero call zone_reclaim when the number of free pages falls below | 
 |  * the watermarks. | 
 |  * | 
 |  * In the future we may add flags to the mode. However, the page allocator | 
 |  * should only have to check that zone_reclaim_mode != 0 before calling | 
 |  * zone_reclaim(). | 
 |  */ | 
 | int zone_reclaim_mode __read_mostly; | 
 |  | 
 | #define RECLAIM_OFF 0 | 
 | #define RECLAIM_ZONE (1<<0)	/* Run shrink_cache on the zone */ | 
 | #define RECLAIM_WRITE (1<<1)	/* Writeout pages during reclaim */ | 
 | #define RECLAIM_SWAP (1<<2)	/* Swap pages out during reclaim */ | 
 | #define RECLAIM_SLAB (1<<3)	/* Do a global slab shrink if the zone is out of memory */ | 
 |  | 
 | /* | 
 |  * Mininum time between zone reclaim scans | 
 |  */ | 
 | int zone_reclaim_interval __read_mostly = 30*HZ; | 
 |  | 
 | /* | 
 |  * Priority for ZONE_RECLAIM. This determines the fraction of pages | 
 |  * of a node considered for each zone_reclaim. 4 scans 1/16th of | 
 |  * a zone. | 
 |  */ | 
 | #define ZONE_RECLAIM_PRIORITY 4 | 
 |  | 
 | /* | 
 |  * Try to free up some pages from this zone through reclaim. | 
 |  */ | 
 | int zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order) | 
 | { | 
 | 	int nr_pages; | 
 | 	struct task_struct *p = current; | 
 | 	struct reclaim_state reclaim_state; | 
 | 	struct scan_control sc; | 
 | 	cpumask_t mask; | 
 | 	int node_id; | 
 |  | 
 | 	if (time_before(jiffies, | 
 | 		zone->last_unsuccessful_zone_reclaim + zone_reclaim_interval)) | 
 | 			return 0; | 
 |  | 
 | 	if (!(gfp_mask & __GFP_WAIT) || | 
 | 		zone->all_unreclaimable || | 
 | 		atomic_read(&zone->reclaim_in_progress) > 0 || | 
 | 		(p->flags & PF_MEMALLOC)) | 
 | 			return 0; | 
 |  | 
 | 	node_id = zone->zone_pgdat->node_id; | 
 | 	mask = node_to_cpumask(node_id); | 
 | 	if (!cpus_empty(mask) && node_id != numa_node_id()) | 
 | 		return 0; | 
 |  | 
 | 	sc.may_writepage = !!(zone_reclaim_mode & RECLAIM_WRITE); | 
 | 	sc.may_swap = !!(zone_reclaim_mode & RECLAIM_SWAP); | 
 | 	sc.nr_scanned = 0; | 
 | 	sc.nr_reclaimed = 0; | 
 | 	sc.priority = ZONE_RECLAIM_PRIORITY + 1; | 
 | 	sc.nr_mapped = read_page_state(nr_mapped); | 
 | 	sc.gfp_mask = gfp_mask; | 
 |  | 
 | 	disable_swap_token(); | 
 |  | 
 | 	nr_pages = 1 << order; | 
 | 	if (nr_pages > SWAP_CLUSTER_MAX) | 
 | 		sc.swap_cluster_max = nr_pages; | 
 | 	else | 
 | 		sc.swap_cluster_max = SWAP_CLUSTER_MAX; | 
 |  | 
 | 	cond_resched(); | 
 | 	/* | 
 | 	 * We need to be able to allocate from the reserves for RECLAIM_SWAP | 
 | 	 * and we also need to be able to write out pages for RECLAIM_WRITE | 
 | 	 * and RECLAIM_SWAP. | 
 | 	 */ | 
 | 	p->flags |= PF_MEMALLOC | PF_SWAPWRITE; | 
 | 	reclaim_state.reclaimed_slab = 0; | 
 | 	p->reclaim_state = &reclaim_state; | 
 |  | 
 | 	/* | 
 | 	 * Free memory by calling shrink zone with increasing priorities | 
 | 	 * until we have enough memory freed. | 
 | 	 */ | 
 | 	do { | 
 | 		sc.priority--; | 
 | 		shrink_zone(zone, &sc); | 
 |  | 
 | 	} while (sc.nr_reclaimed < nr_pages && sc.priority > 0); | 
 |  | 
 | 	if (sc.nr_reclaimed < nr_pages && (zone_reclaim_mode & RECLAIM_SLAB)) { | 
 | 		/* | 
 | 		 * shrink_slab does not currently allow us to determine | 
 | 		 * how many pages were freed in the zone. So we just | 
 | 		 * shake the slab and then go offnode for a single allocation. | 
 | 		 * | 
 | 		 * shrink_slab will free memory on all zones and may take | 
 | 		 * a long time. | 
 | 		 */ | 
 | 		shrink_slab(sc.nr_scanned, gfp_mask, order); | 
 | 	} | 
 |  | 
 | 	p->reclaim_state = NULL; | 
 | 	current->flags &= ~(PF_MEMALLOC | PF_SWAPWRITE); | 
 |  | 
 | 	if (sc.nr_reclaimed == 0) | 
 | 		zone->last_unsuccessful_zone_reclaim = jiffies; | 
 |  | 
 | 	return sc.nr_reclaimed >= nr_pages; | 
 | } | 
 | #endif | 
 |  |