| /* | 
 |  * ALSA SoC Texas Instruments TPA6130A2 headset stereo amplifier driver | 
 |  * | 
 |  * Copyright (C) Nokia Corporation | 
 |  * | 
 |  * Author: Peter Ujfalusi <peter.ujfalusi@nokia.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * version 2 as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, but | 
 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  * General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
 |  * 02110-1301 USA | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/device.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/regulator/consumer.h> | 
 | #include <linux/slab.h> | 
 | #include <sound/tpa6130a2-plat.h> | 
 | #include <sound/soc.h> | 
 | #include <sound/tlv.h> | 
 |  | 
 | #include "tpa6130a2.h" | 
 |  | 
 | static struct i2c_client *tpa6130a2_client; | 
 |  | 
 | /* This struct is used to save the context */ | 
 | struct tpa6130a2_data { | 
 | 	struct mutex mutex; | 
 | 	unsigned char regs[TPA6130A2_CACHEREGNUM]; | 
 | 	struct regulator *supply; | 
 | 	int power_gpio; | 
 | 	u8 power_state:1; | 
 | 	enum tpa_model id; | 
 | }; | 
 |  | 
 | static int tpa6130a2_i2c_read(int reg) | 
 | { | 
 | 	struct tpa6130a2_data *data; | 
 | 	int val; | 
 |  | 
 | 	BUG_ON(tpa6130a2_client == NULL); | 
 | 	data = i2c_get_clientdata(tpa6130a2_client); | 
 |  | 
 | 	/* If powered off, return the cached value */ | 
 | 	if (data->power_state) { | 
 | 		val = i2c_smbus_read_byte_data(tpa6130a2_client, reg); | 
 | 		if (val < 0) | 
 | 			dev_err(&tpa6130a2_client->dev, "Read failed\n"); | 
 | 		else | 
 | 			data->regs[reg] = val; | 
 | 	} else { | 
 | 		val = data->regs[reg]; | 
 | 	} | 
 |  | 
 | 	return val; | 
 | } | 
 |  | 
 | static int tpa6130a2_i2c_write(int reg, u8 value) | 
 | { | 
 | 	struct tpa6130a2_data *data; | 
 | 	int val = 0; | 
 |  | 
 | 	BUG_ON(tpa6130a2_client == NULL); | 
 | 	data = i2c_get_clientdata(tpa6130a2_client); | 
 |  | 
 | 	if (data->power_state) { | 
 | 		val = i2c_smbus_write_byte_data(tpa6130a2_client, reg, value); | 
 | 		if (val < 0) { | 
 | 			dev_err(&tpa6130a2_client->dev, "Write failed\n"); | 
 | 			return val; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Either powered on or off, we save the context */ | 
 | 	data->regs[reg] = value; | 
 |  | 
 | 	return val; | 
 | } | 
 |  | 
 | static u8 tpa6130a2_read(int reg) | 
 | { | 
 | 	struct tpa6130a2_data *data; | 
 |  | 
 | 	BUG_ON(tpa6130a2_client == NULL); | 
 | 	data = i2c_get_clientdata(tpa6130a2_client); | 
 |  | 
 | 	return data->regs[reg]; | 
 | } | 
 |  | 
 | static int tpa6130a2_initialize(void) | 
 | { | 
 | 	struct tpa6130a2_data *data; | 
 | 	int i, ret = 0; | 
 |  | 
 | 	BUG_ON(tpa6130a2_client == NULL); | 
 | 	data = i2c_get_clientdata(tpa6130a2_client); | 
 |  | 
 | 	for (i = 1; i < TPA6130A2_REG_VERSION; i++) { | 
 | 		ret = tpa6130a2_i2c_write(i, data->regs[i]); | 
 | 		if (ret < 0) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int tpa6130a2_power(u8 power) | 
 | { | 
 | 	struct	tpa6130a2_data *data; | 
 | 	u8	val; | 
 | 	int	ret = 0; | 
 |  | 
 | 	BUG_ON(tpa6130a2_client == NULL); | 
 | 	data = i2c_get_clientdata(tpa6130a2_client); | 
 |  | 
 | 	mutex_lock(&data->mutex); | 
 | 	if (power == data->power_state) | 
 | 		goto exit; | 
 |  | 
 | 	if (power) { | 
 | 		ret = regulator_enable(data->supply); | 
 | 		if (ret != 0) { | 
 | 			dev_err(&tpa6130a2_client->dev, | 
 | 				"Failed to enable supply: %d\n", ret); | 
 | 			goto exit; | 
 | 		} | 
 | 		/* Power on */ | 
 | 		if (data->power_gpio >= 0) | 
 | 			gpio_set_value(data->power_gpio, 1); | 
 |  | 
 | 		data->power_state = 1; | 
 | 		ret = tpa6130a2_initialize(); | 
 | 		if (ret < 0) { | 
 | 			dev_err(&tpa6130a2_client->dev, | 
 | 				"Failed to initialize chip\n"); | 
 | 			if (data->power_gpio >= 0) | 
 | 				gpio_set_value(data->power_gpio, 0); | 
 | 			regulator_disable(data->supply); | 
 | 			data->power_state = 0; | 
 | 			goto exit; | 
 | 		} | 
 | 	} else { | 
 | 		/* set SWS */ | 
 | 		val = tpa6130a2_read(TPA6130A2_REG_CONTROL); | 
 | 		val |= TPA6130A2_SWS; | 
 | 		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val); | 
 |  | 
 | 		/* Power off */ | 
 | 		if (data->power_gpio >= 0) | 
 | 			gpio_set_value(data->power_gpio, 0); | 
 |  | 
 | 		ret = regulator_disable(data->supply); | 
 | 		if (ret != 0) { | 
 | 			dev_err(&tpa6130a2_client->dev, | 
 | 				"Failed to disable supply: %d\n", ret); | 
 | 			goto exit; | 
 | 		} | 
 |  | 
 | 		data->power_state = 0; | 
 | 	} | 
 |  | 
 | exit: | 
 | 	mutex_unlock(&data->mutex); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int tpa6130a2_get_volsw(struct snd_kcontrol *kcontrol, | 
 | 		struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct soc_mixer_control *mc = | 
 | 		(struct soc_mixer_control *)kcontrol->private_value; | 
 | 	struct tpa6130a2_data *data; | 
 | 	unsigned int reg = mc->reg; | 
 | 	unsigned int shift = mc->shift; | 
 | 	int max = mc->max; | 
 | 	unsigned int mask = (1 << fls(max)) - 1; | 
 | 	unsigned int invert = mc->invert; | 
 |  | 
 | 	BUG_ON(tpa6130a2_client == NULL); | 
 | 	data = i2c_get_clientdata(tpa6130a2_client); | 
 |  | 
 | 	mutex_lock(&data->mutex); | 
 |  | 
 | 	ucontrol->value.integer.value[0] = | 
 | 		(tpa6130a2_read(reg) >> shift) & mask; | 
 |  | 
 | 	if (invert) | 
 | 		ucontrol->value.integer.value[0] = | 
 | 			max - ucontrol->value.integer.value[0]; | 
 |  | 
 | 	mutex_unlock(&data->mutex); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tpa6130a2_put_volsw(struct snd_kcontrol *kcontrol, | 
 | 		struct snd_ctl_elem_value *ucontrol) | 
 | { | 
 | 	struct soc_mixer_control *mc = | 
 | 		(struct soc_mixer_control *)kcontrol->private_value; | 
 | 	struct tpa6130a2_data *data; | 
 | 	unsigned int reg = mc->reg; | 
 | 	unsigned int shift = mc->shift; | 
 | 	int max = mc->max; | 
 | 	unsigned int mask = (1 << fls(max)) - 1; | 
 | 	unsigned int invert = mc->invert; | 
 | 	unsigned int val = (ucontrol->value.integer.value[0] & mask); | 
 | 	unsigned int val_reg; | 
 |  | 
 | 	BUG_ON(tpa6130a2_client == NULL); | 
 | 	data = i2c_get_clientdata(tpa6130a2_client); | 
 |  | 
 | 	if (invert) | 
 | 		val = max - val; | 
 |  | 
 | 	mutex_lock(&data->mutex); | 
 |  | 
 | 	val_reg = tpa6130a2_read(reg); | 
 | 	if (((val_reg >> shift) & mask) == val) { | 
 | 		mutex_unlock(&data->mutex); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	val_reg &= ~(mask << shift); | 
 | 	val_reg |= val << shift; | 
 | 	tpa6130a2_i2c_write(reg, val_reg); | 
 |  | 
 | 	mutex_unlock(&data->mutex); | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | /* | 
 |  * TPA6130 volume. From -59.5 to 4 dB with increasing step size when going | 
 |  * down in gain. | 
 |  */ | 
 | static const unsigned int tpa6130_tlv[] = { | 
 | 	TLV_DB_RANGE_HEAD(10), | 
 | 	0, 1, TLV_DB_SCALE_ITEM(-5950, 600, 0), | 
 | 	2, 3, TLV_DB_SCALE_ITEM(-5000, 250, 0), | 
 | 	4, 5, TLV_DB_SCALE_ITEM(-4550, 160, 0), | 
 | 	6, 7, TLV_DB_SCALE_ITEM(-4140, 190, 0), | 
 | 	8, 9, TLV_DB_SCALE_ITEM(-3650, 120, 0), | 
 | 	10, 11, TLV_DB_SCALE_ITEM(-3330, 160, 0), | 
 | 	12, 13, TLV_DB_SCALE_ITEM(-3040, 180, 0), | 
 | 	14, 20, TLV_DB_SCALE_ITEM(-2710, 110, 0), | 
 | 	21, 37, TLV_DB_SCALE_ITEM(-1960, 74, 0), | 
 | 	38, 63, TLV_DB_SCALE_ITEM(-720, 45, 0), | 
 | }; | 
 |  | 
 | static const struct snd_kcontrol_new tpa6130a2_controls[] = { | 
 | 	SOC_SINGLE_EXT_TLV("TPA6130A2 Headphone Playback Volume", | 
 | 		       TPA6130A2_REG_VOL_MUTE, 0, 0x3f, 0, | 
 | 		       tpa6130a2_get_volsw, tpa6130a2_put_volsw, | 
 | 		       tpa6130_tlv), | 
 | }; | 
 |  | 
 | static const unsigned int tpa6140_tlv[] = { | 
 | 	TLV_DB_RANGE_HEAD(3), | 
 | 	0, 8, TLV_DB_SCALE_ITEM(-5900, 400, 0), | 
 | 	9, 16, TLV_DB_SCALE_ITEM(-2500, 200, 0), | 
 | 	17, 31, TLV_DB_SCALE_ITEM(-1000, 100, 0), | 
 | }; | 
 |  | 
 | static const struct snd_kcontrol_new tpa6140a2_controls[] = { | 
 | 	SOC_SINGLE_EXT_TLV("TPA6140A2 Headphone Playback Volume", | 
 | 		       TPA6130A2_REG_VOL_MUTE, 1, 0x1f, 0, | 
 | 		       tpa6130a2_get_volsw, tpa6130a2_put_volsw, | 
 | 		       tpa6140_tlv), | 
 | }; | 
 |  | 
 | /* | 
 |  * Enable or disable channel (left or right) | 
 |  * The bit number for mute and amplifier are the same per channel: | 
 |  * bit 6: Right channel | 
 |  * bit 7: Left channel | 
 |  * in both registers. | 
 |  */ | 
 | static void tpa6130a2_channel_enable(u8 channel, int enable) | 
 | { | 
 | 	u8	val; | 
 |  | 
 | 	if (enable) { | 
 | 		/* Enable channel */ | 
 | 		/* Enable amplifier */ | 
 | 		val = tpa6130a2_read(TPA6130A2_REG_CONTROL); | 
 | 		val |= channel; | 
 | 		val &= ~TPA6130A2_SWS; | 
 | 		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val); | 
 |  | 
 | 		/* Unmute channel */ | 
 | 		val = tpa6130a2_read(TPA6130A2_REG_VOL_MUTE); | 
 | 		val &= ~channel; | 
 | 		tpa6130a2_i2c_write(TPA6130A2_REG_VOL_MUTE, val); | 
 | 	} else { | 
 | 		/* Disable channel */ | 
 | 		/* Mute channel */ | 
 | 		val = tpa6130a2_read(TPA6130A2_REG_VOL_MUTE); | 
 | 		val |= channel; | 
 | 		tpa6130a2_i2c_write(TPA6130A2_REG_VOL_MUTE, val); | 
 |  | 
 | 		/* Disable amplifier */ | 
 | 		val = tpa6130a2_read(TPA6130A2_REG_CONTROL); | 
 | 		val &= ~channel; | 
 | 		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val); | 
 | 	} | 
 | } | 
 |  | 
 | int tpa6130a2_stereo_enable(struct snd_soc_codec *codec, int enable) | 
 | { | 
 | 	int ret = 0; | 
 | 	if (enable) { | 
 | 		ret = tpa6130a2_power(1); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		tpa6130a2_channel_enable(TPA6130A2_HP_EN_R | TPA6130A2_HP_EN_L, | 
 | 					 1); | 
 | 	} else { | 
 | 		tpa6130a2_channel_enable(TPA6130A2_HP_EN_R | TPA6130A2_HP_EN_L, | 
 | 					 0); | 
 | 		ret = tpa6130a2_power(0); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL_GPL(tpa6130a2_stereo_enable); | 
 |  | 
 | int tpa6130a2_add_controls(struct snd_soc_codec *codec) | 
 | { | 
 | 	struct	tpa6130a2_data *data; | 
 |  | 
 | 	if (tpa6130a2_client == NULL) | 
 | 		return -ENODEV; | 
 |  | 
 | 	data = i2c_get_clientdata(tpa6130a2_client); | 
 |  | 
 | 	if (data->id == TPA6140A2) | 
 | 		return snd_soc_add_controls(codec, tpa6140a2_controls, | 
 | 						ARRAY_SIZE(tpa6140a2_controls)); | 
 | 	else | 
 | 		return snd_soc_add_controls(codec, tpa6130a2_controls, | 
 | 						ARRAY_SIZE(tpa6130a2_controls)); | 
 | } | 
 | EXPORT_SYMBOL_GPL(tpa6130a2_add_controls); | 
 |  | 
 | static int __devinit tpa6130a2_probe(struct i2c_client *client, | 
 | 				     const struct i2c_device_id *id) | 
 | { | 
 | 	struct device *dev; | 
 | 	struct tpa6130a2_data *data; | 
 | 	struct tpa6130a2_platform_data *pdata; | 
 | 	const char *regulator; | 
 | 	int ret; | 
 |  | 
 | 	dev = &client->dev; | 
 |  | 
 | 	if (client->dev.platform_data == NULL) { | 
 | 		dev_err(dev, "Platform data not set\n"); | 
 | 		dump_stack(); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	data = kzalloc(sizeof(*data), GFP_KERNEL); | 
 | 	if (data == NULL) { | 
 | 		dev_err(dev, "Can not allocate memory\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	tpa6130a2_client = client; | 
 |  | 
 | 	i2c_set_clientdata(tpa6130a2_client, data); | 
 |  | 
 | 	pdata = client->dev.platform_data; | 
 | 	data->power_gpio = pdata->power_gpio; | 
 | 	data->id = pdata->id; | 
 |  | 
 | 	mutex_init(&data->mutex); | 
 |  | 
 | 	/* Set default register values */ | 
 | 	data->regs[TPA6130A2_REG_CONTROL] =	TPA6130A2_SWS; | 
 | 	data->regs[TPA6130A2_REG_VOL_MUTE] =	TPA6130A2_MUTE_R | | 
 | 						TPA6130A2_MUTE_L; | 
 |  | 
 | 	if (data->power_gpio >= 0) { | 
 | 		ret = gpio_request(data->power_gpio, "tpa6130a2 enable"); | 
 | 		if (ret < 0) { | 
 | 			dev_err(dev, "Failed to request power GPIO (%d)\n", | 
 | 				data->power_gpio); | 
 | 			goto err_gpio; | 
 | 		} | 
 | 		gpio_direction_output(data->power_gpio, 0); | 
 | 	} | 
 |  | 
 | 	switch (data->id) { | 
 | 	default: | 
 | 		dev_warn(dev, "Unknown TPA model (%d). Assuming 6130A2\n", | 
 | 			 pdata->id); | 
 | 	case TPA6130A2: | 
 | 		regulator = "Vdd"; | 
 | 		break; | 
 | 	case TPA6140A2: | 
 | 		regulator = "AVdd"; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	data->supply = regulator_get(dev, regulator); | 
 | 	if (IS_ERR(data->supply)) { | 
 | 		ret = PTR_ERR(data->supply); | 
 | 		dev_err(dev, "Failed to request supply: %d\n", ret); | 
 | 		goto err_regulator; | 
 | 	} | 
 |  | 
 | 	ret = tpa6130a2_power(1); | 
 | 	if (ret != 0) | 
 | 		goto err_power; | 
 |  | 
 |  | 
 | 	/* Read version */ | 
 | 	ret = tpa6130a2_i2c_read(TPA6130A2_REG_VERSION) & | 
 | 				 TPA6130A2_VERSION_MASK; | 
 | 	if ((ret != 1) && (ret != 2)) | 
 | 		dev_warn(dev, "UNTESTED version detected (%d)\n", ret); | 
 |  | 
 | 	/* Disable the chip */ | 
 | 	ret = tpa6130a2_power(0); | 
 | 	if (ret != 0) | 
 | 		goto err_power; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_power: | 
 | 	regulator_put(data->supply); | 
 | err_regulator: | 
 | 	if (data->power_gpio >= 0) | 
 | 		gpio_free(data->power_gpio); | 
 | err_gpio: | 
 | 	kfree(data); | 
 | 	i2c_set_clientdata(tpa6130a2_client, NULL); | 
 | 	tpa6130a2_client = NULL; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int __devexit tpa6130a2_remove(struct i2c_client *client) | 
 | { | 
 | 	struct tpa6130a2_data *data = i2c_get_clientdata(client); | 
 |  | 
 | 	tpa6130a2_power(0); | 
 |  | 
 | 	if (data->power_gpio >= 0) | 
 | 		gpio_free(data->power_gpio); | 
 |  | 
 | 	regulator_put(data->supply); | 
 |  | 
 | 	kfree(data); | 
 | 	tpa6130a2_client = NULL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct i2c_device_id tpa6130a2_id[] = { | 
 | 	{ "tpa6130a2", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, tpa6130a2_id); | 
 |  | 
 | static struct i2c_driver tpa6130a2_i2c_driver = { | 
 | 	.driver = { | 
 | 		.name = "tpa6130a2", | 
 | 		.owner = THIS_MODULE, | 
 | 	}, | 
 | 	.probe = tpa6130a2_probe, | 
 | 	.remove = __devexit_p(tpa6130a2_remove), | 
 | 	.id_table = tpa6130a2_id, | 
 | }; | 
 |  | 
 | static int __init tpa6130a2_init(void) | 
 | { | 
 | 	return i2c_add_driver(&tpa6130a2_i2c_driver); | 
 | } | 
 |  | 
 | static void __exit tpa6130a2_exit(void) | 
 | { | 
 | 	i2c_del_driver(&tpa6130a2_i2c_driver); | 
 | } | 
 |  | 
 | MODULE_AUTHOR("Peter Ujfalusi"); | 
 | MODULE_DESCRIPTION("TPA6130A2 Headphone amplifier driver"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | module_init(tpa6130a2_init); | 
 | module_exit(tpa6130a2_exit); |