ARM: 7378/1: mmci: add support for the Nomadik MMCI variant
The Nomadik variant is somewhere inbetween the U300 and the Ux500
variant, its actually expose the same primecell ID as the U300
but had different characteristics so it needs a small revision
bump and hard-coding from the board/device tree. After this it
works just fine.
Acked-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 032b847..d115916 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -94,6 +94,17 @@
.signal_direction = true,
};
+static struct variant_data variant_nomadik = {
+ .fifosize = 16 * 4,
+ .fifohalfsize = 8 * 4,
+ .clkreg = MCI_CLK_ENABLE,
+ .datalength_bits = 24,
+ .sdio = true,
+ .st_clkdiv = true,
+ .pwrreg_powerup = MCI_PWR_ON,
+ .signal_direction = true,
+};
+
static struct variant_data variant_ux500 = {
.fifosize = 30 * 4,
.fifohalfsize = 8 * 4,
@@ -1569,6 +1580,11 @@
.data = &variant_u300,
},
{
+ .id = 0x10180180,
+ .mask = 0xf0ffffff,
+ .data = &variant_nomadik,
+ },
+ {
.id = 0x00280180,
.mask = 0x00ffffff,
.data = &variant_u300,