myri10ge: use pci_map_page to prepare the dmatest buffer
Allocate a specific page and use pci_map_page for dma test instead
of relying on another existing buffer.
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index db282ed..eab9b5a 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -717,6 +717,8 @@
int status;
size_t bytes;
u32 len;
+ struct page *dmatest_page;
+ dma_addr_t dmatest_bus;
/* try to send a reset command to the card to see if it
* is alive */
@@ -726,6 +728,11 @@
dev_err(&mgp->pdev->dev, "failed reset\n");
return -ENXIO;
}
+ dmatest_page = alloc_page(GFP_KERNEL);
+ if (!dmatest_page)
+ return -ENOMEM;
+ dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
+ DMA_BIDIRECTIONAL);
/* Now exchange information about interrupts */
@@ -764,8 +771,8 @@
len = mgp->tx.boundary;
- cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->rx_done.bus);
- cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->rx_done.bus);
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
cmd.data2 = len * 0x10000;
status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0);
if (status == 0)
@@ -774,8 +781,8 @@
else
dev_warn(&mgp->pdev->dev, "DMA read benchmark failed: %d\n",
status);
- cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->rx_done.bus);
- cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->rx_done.bus);
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
cmd.data2 = len * 0x1;
status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0);
if (status == 0)
@@ -785,8 +792,8 @@
dev_warn(&mgp->pdev->dev, "DMA write benchmark failed: %d\n",
status);
- cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->rx_done.bus);
- cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->rx_done.bus);
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
cmd.data2 = len * 0x10001;
status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0);
if (status == 0)
@@ -796,6 +803,9 @@
dev_warn(&mgp->pdev->dev,
"DMA read/write benchmark failed: %d\n", status);
+ pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
+ put_page(dmatest_page);
+
memset(mgp->rx_done.entry, 0, bytes);
/* reset mcp/driver shared state back to 0 */