ARM: mxc: clean up imx-dma device registration
The patch follows the implementation of gpio-mxc device registration
to break the concentrated imx-dma device registration into soc
specific setup function. Then we can avoid the churn of "#ifdef"
and the cpu_is_mx checking on such a long list, which makes no sense,
considering more soc supports need to be added and we need to support
single image for multiple socs in the long run.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c
index 648bfca..9891adb 100644
--- a/arch/arm/mach-imx/mm-imx35.c
+++ b/arch/arm/mach-imx/mm-imx35.c
@@ -25,6 +25,7 @@
#include <asm/hardware/cache-l2x0.h>
#include <mach/common.h>
+#include <mach/devices-common.h>
#include <mach/hardware.h>
#include <mach/iomux-v3.h>
#include <mach/irqs.h>
@@ -54,9 +55,52 @@
mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
}
+static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
+ .ap_2_ap_addr = 642,
+ .uart_2_mcu_addr = 817,
+ .mcu_2_app_addr = 747,
+ .uartsh_2_mcu_addr = 1183,
+ .per_2_shp_addr = 1033,
+ .mcu_2_shp_addr = 961,
+ .ata_2_mcu_addr = 1333,
+ .mcu_2_ata_addr = 1252,
+ .app_2_mcu_addr = 683,
+ .shp_2_per_addr = 1111,
+ .shp_2_mcu_addr = 892,
+};
+
+static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
+ .ap_2_ap_addr = 729,
+ .uart_2_mcu_addr = 904,
+ .per_2_app_addr = 1597,
+ .mcu_2_app_addr = 834,
+ .uartsh_2_mcu_addr = 1270,
+ .per_2_shp_addr = 1120,
+ .mcu_2_shp_addr = 1048,
+ .ata_2_mcu_addr = 1429,
+ .mcu_2_ata_addr = 1339,
+ .app_2_per_addr = 1531,
+ .app_2_mcu_addr = 770,
+ .shp_2_per_addr = 1198,
+ .shp_2_mcu_addr = 979,
+};
+
+static struct sdma_platform_data imx35_sdma_pdata __initdata = {
+ .sdma_version = 2,
+ .cpu_name = "imx35",
+ .script_addrs = &imx35_to2_sdma_script,
+};
+
void __init imx35_soc_init(void)
{
+ int to_version = mx35_revision() >> 4;
+
mxc_register_gpio(0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
mxc_register_gpio(1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
mxc_register_gpio(2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
+
+ imx35_sdma_pdata.to_version = to_version;
+ if (to_version == 1)
+ imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
+ imx_add_imx_sdma(MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
}