USB Gadget: Verify VBUS current before setting the device self-powered bit
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Praveena Nadahally <praveen.nadahally@stericsson.com>
Signed-off-by: Parirajan Muthalagu <parirajan.muthalagu@stericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 1160c55..eaa9a59 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1074,7 +1074,13 @@
cdev->bufsiz = USB_BUFSIZ;
cdev->driver = composite;
- usb_gadget_set_selfpowered(gadget);
+ /*
+ * As per USB compliance update, a device that is actively drawing
+ * more than 100mA from USB must report itself as bus-powered in
+ * the GetStatus(DEVICE) call.
+ */
+ if (CONFIG_USB_GADGET_VBUS_DRAW <= USB_SELF_POWER_VBUS_MAX_DRAW)
+ usb_gadget_set_selfpowered(gadget);
/* interface and string IDs start at zero via kzalloc.
* we force endpoints to start unassigned; few controller
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index da2ed77..b0f7e9f 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -808,4 +808,14 @@
*/
};
+/*-------------------------------------------------------------------------*/
+
+/*
+ * As per USB compliance update, a device that is actively drawing
+ * more than 100mA from USB must report itself as bus-powered in
+ * the GetStatus(DEVICE) call.
+ * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
+ */
+#define USB_SELF_POWER_VBUS_MAX_DRAW 100
+
#endif /* __LINUX_USB_CH9_H */