[MIPS] time: Replace plat_timer_setup with modern APIs.
plat_timer_setup is no longer getting called.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index a59f67f..bab935a 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -224,7 +224,7 @@
uint64_t mips_freq = mips_hpt_frequency;
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd;
- unsigned int irq = MIPS_CPU_IRQ_BASE + 7;
+ unsigned int irq;
if (!cpu_has_counter || !mips_hpt_frequency)
return;
@@ -243,6 +243,15 @@
if (!c0_compare_int_usable())
return;
+ /*
+ * With vectored interrupts things are getting platform specific.
+ * get_c0_compare_int is a hook to allow a platform to return the
+ * interrupt number of it's liking.
+ */
+ irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+ if (get_c0_compare_int)
+ irq = get_c0_compare_int();
+
cd = &per_cpu(mips_clockevent_device, cpu);
cd->name = "MIPS";
@@ -267,13 +276,15 @@
clockevents_register_device(cd);
- if (!cp0_timer_irq_installed) {
+ if (!cp0_timer_irq_installed)
+ return;
+
+ cp0_timer_irq_installed = 1;
+
#ifdef CONFIG_MIPS_MT_SMTC
#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
- setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
+ setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
#else
- setup_irq(irq, &c0_compare_irqaction);
-#endif /* CONFIG_MIPS_MT_SMTC */
- cp0_timer_irq_installed = 1;
- }
+ setup_irq(irq, &c0_compare_irqaction);
+#endif
}
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 9d6243a..f02ce63 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -127,26 +127,6 @@
return mc146818_get_cmos_time();
}
-void __init plat_time_init(void)
-{
- unsigned int est_freq;
-
- /* Set Data mode - binary. */
- CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
-
- est_freq = estimate_cpu_frequency();
-
- printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
- (est_freq%1000000)*100/1000000);
-
- cpu_khz = est_freq / 1000;
-
- mips_scroll_message();
-#ifdef CONFIG_I8253 /* Only Malta has a PIT */
- setup_pit_timer();
-#endif
-}
-
void __init plat_perf_setup(void)
{
cp0_perfcount_irq = -1;
@@ -166,14 +146,13 @@
}
}
-void __init plat_timer_setup(struct irqaction *irq)
+unsigned int __init get_c0_compare_int(void)
{
#ifdef MSC01E_INT_BASE
if (cpu_has_veic) {
set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
- }
- else
+ } else
#endif
{
if (cpu_has_vint)
@@ -181,13 +160,26 @@
mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
}
-#ifdef CONFIG_MIPS_MT_SMTC
- setup_irq_smtc(mips_cpu_timer_irq, irq, 0x100 << cp0_compare_irq);
-#else
- setup_irq(mips_cpu_timer_irq, irq);
-#endif /* CONFIG_MIPS_MT_SMTC */
-#ifdef CONFIG_SMP
- set_irq_handler(mips_cpu_timer_irq, handle_percpu_irq);
+ return mips_cpu_timer_irq;
+}
+
+void __init plat_time_init(void)
+{
+ unsigned int est_freq;
+
+ /* Set Data mode - binary. */
+ CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
+
+ est_freq = estimate_cpu_frequency();
+
+ printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
+ (est_freq%1000000)*100/1000000);
+
+ cpu_khz = est_freq / 1000;
+
+ mips_scroll_message();
+#ifdef CONFIG_I8253 /* Only Malta has a PIT */
+ setup_pit_timer();
#endif
plat_perf_setup();
diff --git a/arch/mips/mipssim/sim_time.c b/arch/mips/mipssim/sim_time.c
index e7fa0d1..bfaafa3 100644
--- a/arch/mips/mipssim/sim_time.c
+++ b/arch/mips/mipssim/sim_time.c
@@ -75,6 +75,30 @@
return count;
}
+static int mips_cpu_timer_irq;
+
+static void mips_timer_dispatch(void)
+{
+ do_IRQ(mips_cpu_timer_irq);
+}
+
+
+unsigned __init get_c0_compare_int(void)
+{
+#ifdef MSC01E_INT_BASE
+ if (cpu_has_veic) {
+ set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
+ mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+ } else {
+#endif
+ if (cpu_has_vint)
+ set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
+ mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+ }
+
+ return mips_cpu_timer_irq;
+}
+
void __init plat_time_init(void)
{
unsigned int est_freq, flags;
@@ -93,35 +117,3 @@
local_irq_restore(flags);
}
-
-static int mips_cpu_timer_irq;
-
-static void mips_timer_dispatch(void)
-{
- do_IRQ(mips_cpu_timer_irq);
-}
-
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
- if (cpu_has_veic) {
- set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
- mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
- } else {
- if (cpu_has_vint)
- set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
- mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
- }
-
- /* we are using the cpu counter for timer interrupts */
- setup_irq(mips_cpu_timer_irq, irq);
-
-#ifdef CONFIG_SMP
- /* irq_desc(riptor) is a global resource, when the interrupt overlaps
- on seperate cpu's the first one tries to handle the second interrupt.
- The effect is that the int remains disabled on the second cpu.
- Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
- irq_desc[mips_cpu_timer_irq].flags |= IRQ_PER_CPU;
- set_irq_handler(mips_cpu_timer_irq, handle_percpu_irq);
-#endif
-}