i2c-sibyte: SWARM I2C board initialization
The standard rtc-m41t80.c driver cannot be used with the SWARM as it is,
because the board does not provide setup information for the I2C core.
As a result the bus and the address to probe for the M41T80 chip is not
known.
Here is a set of changes that fix the problem:
1. swarm-i2c.c -- SWARM I2C board setup, currently for the M41T80 chip on
the bus #1 only (there is a MAX6654 temperature sensor on the bus #0
which may be added in the future if we have a driver for that chip).
2. The i2c-sibyte.c BCM1250A SMBus controller driver now registers its
buses as numbered so that board setup is correctly applied.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/arch/mips/sibyte/swarm/swarm-i2c.c b/arch/mips/sibyte/swarm/swarm-i2c.c
new file mode 100644
index 0000000..4282ac9
--- /dev/null
+++ b/arch/mips/sibyte/swarm/swarm-i2c.c
@@ -0,0 +1,37 @@
+/*
+ * arch/mips/sibyte/swarm/swarm-i2c.c
+ *
+ * Broadcom BCM91250A (SWARM), etc. I2C platform setup.
+ *
+ * Copyright (c) 2008 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+
+static struct i2c_board_info swarm_i2c_info1[] __initdata = {
+ {
+ I2C_BOARD_INFO("m41t81", 0x68),
+ },
+};
+
+static int __init swarm_i2c_init(void)
+{
+ int err;
+
+ err = i2c_register_board_info(1, swarm_i2c_info1,
+ ARRAY_SIZE(swarm_i2c_info1));
+ if (err < 0)
+ printk(KERN_ERR
+ "swarm-i2c: cannot register board I2C devices\n");
+ return err;
+}
+
+arch_initcall(swarm_i2c_init);