Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
drivers/net/ethernet/emulex/benet/be.h
drivers/net/netconsole.c
net/bridge/br_private.h
Three mostly trivial conflicts.
The net/bridge/br_private.h conflict was a function signature (argument
addition) change overlapping with the extern removals from Joe Perches.
In drivers/net/netconsole.c we had one change adjusting a printk message
whilst another changed "printk(KERN_INFO" into "pr_info(".
Lastly, the emulex change was a new inline function addition overlapping
with Joe Perches's extern removals.
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 51410c2..4d978a3 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -27,6 +27,14 @@
*/
#define SRC_CR 0x00U
+#define SRC_CR_T0_ENSEL BIT(15)
+#define SRC_CR_T1_ENSEL BIT(17)
+#define SRC_CR_T2_ENSEL BIT(19)
+#define SRC_CR_T3_ENSEL BIT(21)
+#define SRC_CR_T4_ENSEL BIT(23)
+#define SRC_CR_T5_ENSEL BIT(25)
+#define SRC_CR_T6_ENSEL BIT(27)
+#define SRC_CR_T7_ENSEL BIT(29)
#define SRC_XTALCR 0x0CU
#define SRC_XTALCR_XTALTIMEN BIT(20)
#define SRC_XTALCR_SXTALDIS BIT(19)
@@ -543,6 +551,19 @@
__func__, np->name);
return;
}
+
+ /* Set all timers to use the 2.4 MHz TIMCLK */
+ val = readl(src_base + SRC_CR);
+ val |= SRC_CR_T0_ENSEL;
+ val |= SRC_CR_T1_ENSEL;
+ val |= SRC_CR_T2_ENSEL;
+ val |= SRC_CR_T3_ENSEL;
+ val |= SRC_CR_T4_ENSEL;
+ val |= SRC_CR_T5_ENSEL;
+ val |= SRC_CR_T6_ENSEL;
+ val |= SRC_CR_T7_ENSEL;
+ writel(val, src_base + SRC_CR);
+
val = readl(src_base + SRC_XTALCR);
pr_info("SXTALO is %s\n",
(val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
diff --git a/drivers/clk/mvebu/armada-370.c b/drivers/clk/mvebu/armada-370.c
index fc777bd..81a202d 100644
--- a/drivers/clk/mvebu/armada-370.c
+++ b/drivers/clk/mvebu/armada-370.c
@@ -39,8 +39,8 @@
};
static const u32 a370_tclk_freqs[] __initconst = {
- 16600000,
- 20000000,
+ 166000000,
+ 200000000,
};
static u32 __init a370_get_tclk_freq(void __iomem *sar)
diff --git a/drivers/clk/socfpga/clk.c b/drivers/clk/socfpga/clk.c
index 5bb848c..81dd31a 100644
--- a/drivers/clk/socfpga/clk.c
+++ b/drivers/clk/socfpga/clk.c
@@ -49,7 +49,7 @@
#define SOCFPGA_L4_SP_CLK "l4_sp_clk"
#define SOCFPGA_NAND_CLK "nand_clk"
#define SOCFPGA_NAND_X_CLK "nand_x_clk"
-#define SOCFPGA_MMC_CLK "mmc_clk"
+#define SOCFPGA_MMC_CLK "sdmmc_clk"
#define SOCFPGA_DB_CLK "gpio_db_clk"
#define div_mask(width) ((1 << (width)) - 1)
diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index 67ccf4a..f5e4c21 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -107,7 +107,7 @@
vco = icst_hz_to_vco(icst->params, rate);
icst->rate = icst_hz(icst->params, vco);
- vco_set(icst->vcoreg, icst->lockreg, vco);
+ vco_set(icst->lockreg, icst->vcoreg, vco);
return 0;
}
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index d2c3253..506fd23 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -986,12 +986,12 @@
{
int ret;
+ if (acpi_disabled)
+ return -ENODEV;
+
/* don't keep reloading if cpufreq_driver exists */
if (cpufreq_get_current_driver())
- return 0;
-
- if (acpi_disabled)
- return 0;
+ return -EEXIST;
pr_debug("acpi_cpufreq_init\n");
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index badf620..eb3fdc7 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -48,7 +48,7 @@
}
struct sample {
- int core_pct_busy;
+ int32_t core_pct_busy;
u64 aperf;
u64 mperf;
int freq;
@@ -68,7 +68,7 @@
int32_t i_gain;
int32_t d_gain;
int deadband;
- int last_err;
+ int32_t last_err;
};
struct cpudata {
@@ -153,16 +153,15 @@
pid->d_gain = div_fp(int_tofp(percent), int_tofp(100));
}
-static signed int pid_calc(struct _pid *pid, int busy)
+static signed int pid_calc(struct _pid *pid, int32_t busy)
{
- signed int err, result;
+ signed int result;
int32_t pterm, dterm, fp_error;
int32_t integral_limit;
- err = pid->setpoint - busy;
- fp_error = int_tofp(err);
+ fp_error = int_tofp(pid->setpoint) - busy;
- if (abs(err) <= pid->deadband)
+ if (abs(fp_error) <= int_tofp(pid->deadband))
return 0;
pterm = mul_fp(pid->p_gain, fp_error);
@@ -176,8 +175,8 @@
if (pid->integral < -integral_limit)
pid->integral = -integral_limit;
- dterm = mul_fp(pid->d_gain, (err - pid->last_err));
- pid->last_err = err;
+ dterm = mul_fp(pid->d_gain, fp_error - pid->last_err);
+ pid->last_err = fp_error;
result = pterm + mul_fp(pid->integral, pid->i_gain) + dterm;
@@ -367,12 +366,13 @@
static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max)
{
int max_perf = cpu->pstate.turbo_pstate;
+ int max_perf_adj;
int min_perf;
if (limits.no_turbo)
max_perf = cpu->pstate.max_pstate;
- max_perf = fp_toint(mul_fp(int_tofp(max_perf), limits.max_perf));
- *max = clamp_t(int, max_perf,
+ max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf), limits.max_perf));
+ *max = clamp_t(int, max_perf_adj,
cpu->pstate.min_pstate, cpu->pstate.turbo_pstate);
min_perf = fp_toint(mul_fp(int_tofp(max_perf), limits.min_perf));
@@ -436,8 +436,9 @@
struct sample *sample)
{
u64 core_pct;
- core_pct = div64_u64(sample->aperf * 100, sample->mperf);
- sample->freq = cpu->pstate.max_pstate * core_pct * 1000;
+ core_pct = div64_u64(int_tofp(sample->aperf * 100),
+ sample->mperf);
+ sample->freq = fp_toint(cpu->pstate.max_pstate * core_pct * 1000);
sample->core_pct_busy = core_pct;
}
@@ -469,22 +470,19 @@
mod_timer_pinned(&cpu->timer, jiffies + delay);
}
-static inline int intel_pstate_get_scaled_busy(struct cpudata *cpu)
+static inline int32_t intel_pstate_get_scaled_busy(struct cpudata *cpu)
{
- int32_t busy_scaled;
int32_t core_busy, max_pstate, current_pstate;
- core_busy = int_tofp(cpu->samples[cpu->sample_ptr].core_pct_busy);
+ core_busy = cpu->samples[cpu->sample_ptr].core_pct_busy;
max_pstate = int_tofp(cpu->pstate.max_pstate);
current_pstate = int_tofp(cpu->pstate.current_pstate);
- busy_scaled = mul_fp(core_busy, div_fp(max_pstate, current_pstate));
-
- return fp_toint(busy_scaled);
+ return mul_fp(core_busy, div_fp(max_pstate, current_pstate));
}
static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu)
{
- int busy_scaled;
+ int32_t busy_scaled;
struct _pid *pid;
signed int ctl = 0;
int steps;
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 3519111..10b577f 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -305,6 +305,7 @@
edma_alloc_slot(EDMA_CTLR(echan->ch_num),
EDMA_SLOT_ANY);
if (echan->slot[i] < 0) {
+ kfree(edesc);
dev_err(dev, "Failed to allocate slot\n");
kfree(edesc);
return NULL;
@@ -346,6 +347,7 @@
ccnt = sg_dma_len(sg) / (acnt * bcnt);
if (ccnt > (SZ_64K - 1)) {
dev_err(dev, "Exceeded max SG segment size\n");
+ kfree(edesc);
return NULL;
}
cidx = acnt * bcnt;
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 05ad9ba..fe58d08 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -61,7 +61,7 @@
/** Ioctl table */
static const struct drm_ioctl_desc drm_ioctls[] = {
- DRM_IOCTL_DEF(DRM_IOCTL_VERSION, drm_version, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_VERSION, drm_version, DRM_UNLOCKED|DRM_RENDER_ALLOW),
DRM_IOCTL_DEF(DRM_IOCTL_GET_UNIQUE, drm_getunique, 0),
DRM_IOCTL_DEF(DRM_IOCTL_GET_MAGIC, drm_getmagic, 0),
DRM_IOCTL_DEF(DRM_IOCTL_IRQ_BUSID, drm_irq_by_busid, DRM_MASTER|DRM_ROOT_ONLY),
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index ea9022e..10d1de5 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -83,8 +83,7 @@
return true;
}
-static void intel_crt_get_config(struct intel_encoder *encoder,
- struct intel_crtc_config *pipe_config)
+static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_crt *crt = intel_encoder_to_crt(encoder);
@@ -102,7 +101,25 @@
else
flags |= DRM_MODE_FLAG_NVSYNC;
- pipe_config->adjusted_mode.flags |= flags;
+ return flags;
+}
+
+static void intel_crt_get_config(struct intel_encoder *encoder,
+ struct intel_crtc_config *pipe_config)
+{
+ pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
+}
+
+static void hsw_crt_get_config(struct intel_encoder *encoder,
+ struct intel_crtc_config *pipe_config)
+{
+ intel_ddi_get_config(encoder, pipe_config);
+
+ pipe_config->adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
+ DRM_MODE_FLAG_NHSYNC |
+ DRM_MODE_FLAG_PVSYNC |
+ DRM_MODE_FLAG_NVSYNC);
+ pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
}
/* Note: The caller is required to filter out dpms modes not supported by the
@@ -799,7 +816,10 @@
crt->base.mode_set = intel_crt_mode_set;
crt->base.disable = intel_disable_crt;
crt->base.enable = intel_enable_crt;
- crt->base.get_config = intel_crt_get_config;
+ if (IS_HASWELL(dev))
+ crt->base.get_config = hsw_crt_get_config;
+ else
+ crt->base.get_config = intel_crt_get_config;
if (I915_HAS_HOTPLUG(dev))
crt->base.hpd_pin = HPD_CRT;
if (HAS_DDI(dev))
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 63de270..b53fff8 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1249,8 +1249,8 @@
intel_dp_check_link_status(intel_dp);
}
-static void intel_ddi_get_config(struct intel_encoder *encoder,
- struct intel_crtc_config *pipe_config)
+void intel_ddi_get_config(struct intel_encoder *encoder,
+ struct intel_crtc_config *pipe_config)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
@@ -1268,6 +1268,23 @@
flags |= DRM_MODE_FLAG_NVSYNC;
pipe_config->adjusted_mode.flags |= flags;
+
+ switch (temp & TRANS_DDI_BPC_MASK) {
+ case TRANS_DDI_BPC_6:
+ pipe_config->pipe_bpp = 18;
+ break;
+ case TRANS_DDI_BPC_8:
+ pipe_config->pipe_bpp = 24;
+ break;
+ case TRANS_DDI_BPC_10:
+ pipe_config->pipe_bpp = 30;
+ break;
+ case TRANS_DDI_BPC_12:
+ pipe_config->pipe_bpp = 36;
+ break;
+ default:
+ break;
+ }
}
static void intel_ddi_destroy(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 581fb4b..d78d33f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2327,9 +2327,10 @@
FDI_FE_ERRC_ENABLE);
}
-static bool pipe_has_enabled_pch(struct intel_crtc *intel_crtc)
+static bool pipe_has_enabled_pch(struct intel_crtc *crtc)
{
- return intel_crtc->base.enabled && intel_crtc->config.has_pch_encoder;
+ return crtc->base.enabled && crtc->active &&
+ crtc->config.has_pch_encoder;
}
static void ivb_modeset_global_resources(struct drm_device *dev)
@@ -2979,6 +2980,48 @@
I915_READ(VSYNCSHIFT(cpu_transcoder)));
}
+static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t temp;
+
+ temp = I915_READ(SOUTH_CHICKEN1);
+ if (temp & FDI_BC_BIFURCATION_SELECT)
+ return;
+
+ WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
+ WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
+
+ temp |= FDI_BC_BIFURCATION_SELECT;
+ DRM_DEBUG_KMS("enabling fdi C rx\n");
+ I915_WRITE(SOUTH_CHICKEN1, temp);
+ POSTING_READ(SOUTH_CHICKEN1);
+}
+
+static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
+{
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ switch (intel_crtc->pipe) {
+ case PIPE_A:
+ break;
+ case PIPE_B:
+ if (intel_crtc->config.fdi_lanes > 2)
+ WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
+ else
+ cpt_enable_fdi_bc_bifurcation(dev);
+
+ break;
+ case PIPE_C:
+ cpt_enable_fdi_bc_bifurcation(dev);
+
+ break;
+ default:
+ BUG();
+ }
+}
+
/*
* Enable PCH resources required for PCH ports:
* - PCH PLLs
@@ -2997,6 +3040,9 @@
assert_pch_transcoder_disabled(dev_priv, pipe);
+ if (IS_IVYBRIDGE(dev))
+ ivybridge_update_fdi_bc_bifurcation(intel_crtc);
+
/* Write the TU size bits before fdi link training, so that error
* detection works. */
I915_WRITE(FDI_RX_TUSIZE1(pipe),
@@ -4983,6 +5029,22 @@
if (!(tmp & PIPECONF_ENABLE))
return false;
+ if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
+ switch (tmp & PIPECONF_BPC_MASK) {
+ case PIPECONF_6BPC:
+ pipe_config->pipe_bpp = 18;
+ break;
+ case PIPECONF_8BPC:
+ pipe_config->pipe_bpp = 24;
+ break;
+ case PIPECONF_10BPC:
+ pipe_config->pipe_bpp = 30;
+ break;
+ default:
+ break;
+ }
+ }
+
intel_get_pipe_timings(crtc, pipe_config);
i9xx_get_pfit_config(crtc, pipe_config);
@@ -5576,48 +5638,6 @@
return true;
}
-static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t temp;
-
- temp = I915_READ(SOUTH_CHICKEN1);
- if (temp & FDI_BC_BIFURCATION_SELECT)
- return;
-
- WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
- WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
-
- temp |= FDI_BC_BIFURCATION_SELECT;
- DRM_DEBUG_KMS("enabling fdi C rx\n");
- I915_WRITE(SOUTH_CHICKEN1, temp);
- POSTING_READ(SOUTH_CHICKEN1);
-}
-
-static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
-{
- struct drm_device *dev = intel_crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- switch (intel_crtc->pipe) {
- case PIPE_A:
- break;
- case PIPE_B:
- if (intel_crtc->config.fdi_lanes > 2)
- WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
- else
- cpt_enable_fdi_bc_bifurcation(dev);
-
- break;
- case PIPE_C:
- cpt_enable_fdi_bc_bifurcation(dev);
-
- break;
- default:
- BUG();
- }
-}
-
int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
{
/*
@@ -5811,9 +5831,6 @@
&intel_crtc->config.fdi_m_n);
}
- if (IS_IVYBRIDGE(dev))
- ivybridge_update_fdi_bc_bifurcation(intel_crtc);
-
ironlake_set_pipeconf(crtc);
/* Set up the display plane register */
@@ -5881,6 +5898,23 @@
if (!(tmp & PIPECONF_ENABLE))
return false;
+ switch (tmp & PIPECONF_BPC_MASK) {
+ case PIPECONF_6BPC:
+ pipe_config->pipe_bpp = 18;
+ break;
+ case PIPECONF_8BPC:
+ pipe_config->pipe_bpp = 24;
+ break;
+ case PIPECONF_10BPC:
+ pipe_config->pipe_bpp = 30;
+ break;
+ case PIPECONF_12BPC:
+ pipe_config->pipe_bpp = 36;
+ break;
+ default:
+ break;
+ }
+
if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
struct intel_shared_dpll *pll;
@@ -8612,6 +8646,9 @@
PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
+ if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5)
+ PIPE_CONF_CHECK_I(pipe_bpp);
+
#undef PIPE_CONF_CHECK_X
#undef PIPE_CONF_CHECK_I
#undef PIPE_CONF_CHECK_FLAGS
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 2c555f9..1a43137 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1401,6 +1401,26 @@
else
pipe_config->port_clock = 270000;
}
+
+ if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp &&
+ pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) {
+ /*
+ * This is a big fat ugly hack.
+ *
+ * Some machines in UEFI boot mode provide us a VBT that has 18
+ * bpp and 1.62 GHz link bandwidth for eDP, which for reasons
+ * unknown we fail to light up. Yet the same BIOS boots up with
+ * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as
+ * max, not what it tells us to use.
+ *
+ * Note: This will still be broken if the eDP panel is not lit
+ * up by the BIOS, and thus we can't get the mode at module
+ * load.
+ */
+ DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
+ pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp);
+ dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp;
+ }
}
static bool is_edp_psr(struct intel_dp *intel_dp)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 9b7b68f..7f2b384 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -765,6 +765,8 @@
extern bool
intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector);
extern void intel_ddi_fdi_disable(struct drm_crtc *crtc);
+extern void intel_ddi_get_config(struct intel_encoder *encoder,
+ struct intel_crtc_config *pipe_config);
extern void intel_display_handle_reset(struct drm_device *dev);
extern bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 831a5c0..b8af94a 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -700,6 +700,22 @@
},
{
.callback = intel_no_lvds_dmi_callback,
+ .ident = "Intel D410PT",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
+ DMI_MATCH(DMI_BOARD_NAME, "D410PT"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Intel D425KT",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "D425KT"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
.ident = "Intel D510MO",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c
index fe1de85..57fcc4b 100644
--- a/drivers/gpu/drm/radeon/evergreen_hdmi.c
+++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c
@@ -291,6 +291,7 @@
/* fglrx clears sth in AFMT_AUDIO_PACKET_CONTROL2 here */
WREG32(HDMI_ACR_PACKET_CONTROL + offset,
+ HDMI_ACR_SOURCE | /* select SW CTS value */
HDMI_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */
evergreen_hdmi_update_ACR(encoder, mode->clock);
diff --git a/drivers/gpu/drm/radeon/kv_dpm.c b/drivers/gpu/drm/radeon/kv_dpm.c
index 7139906..b419055 100644
--- a/drivers/gpu/drm/radeon/kv_dpm.c
+++ b/drivers/gpu/drm/radeon/kv_dpm.c
@@ -2635,7 +2635,7 @@
pi->caps_sclk_ds = true;
pi->enable_auto_thermal_throttling = true;
pi->disable_nb_ps3_in_battery = false;
- pi->bapm_enable = true;
+ pi->bapm_enable = false;
pi->voltage_drop_t = 0;
pi->caps_sclk_throttle_low_notification = false;
pi->caps_fps = false; /* true? */
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index a400ac1..24f4960 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -1272,8 +1272,8 @@
struct radeon_clock_and_voltage_limits {
u32 sclk;
u32 mclk;
- u32 vddc;
- u32 vddci;
+ u16 vddc;
+ u16 vddci;
};
struct radeon_clock_array {
diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
index 3591855..6df2350 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -594,7 +594,7 @@
pr_debug("Entering isert_connect_release(): >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>\n");
- if (device->use_frwr)
+ if (device && device->use_frwr)
isert_conn_free_frwr_pool(isert_conn);
if (isert_conn->conn_qp) {
diff --git a/drivers/input/input.c b/drivers/input/input.c
index c044699..e75d015 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1734,6 +1734,7 @@
*/
struct input_dev *input_allocate_device(void)
{
+ static atomic_t input_no = ATOMIC_INIT(0);
struct input_dev *dev;
dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL);
@@ -1743,9 +1744,13 @@
device_initialize(&dev->dev);
mutex_init(&dev->mutex);
spin_lock_init(&dev->event_lock);
+ init_timer(&dev->timer);
INIT_LIST_HEAD(&dev->h_list);
INIT_LIST_HEAD(&dev->node);
+ dev_set_name(&dev->dev, "input%ld",
+ (unsigned long) atomic_inc_return(&input_no) - 1);
+
__module_get(THIS_MODULE);
}
@@ -2019,7 +2024,6 @@
*/
int input_register_device(struct input_dev *dev)
{
- static atomic_t input_no = ATOMIC_INIT(0);
struct input_devres *devres = NULL;
struct input_handler *handler;
unsigned int packet_size;
@@ -2059,7 +2063,6 @@
* If delay and period are pre-set by the driver, then autorepeating
* is handled by the driver itself and we don't do it in input.c.
*/
- init_timer(&dev->timer);
if (!dev->rep[REP_DELAY] && !dev->rep[REP_PERIOD]) {
dev->timer.data = (long) dev;
dev->timer.function = input_repeat_key;
@@ -2073,9 +2076,6 @@
if (!dev->setkeycode)
dev->setkeycode = input_default_setkeycode;
- dev_set_name(&dev->dev, "input%ld",
- (unsigned long) atomic_inc_return(&input_no) - 1);
-
error = device_add(&dev->dev);
if (error)
goto err_free_vals;
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 134c3b4..a2e758d 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -786,10 +786,17 @@
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
- if (pdata)
+ if (pdata) {
error = pxa27x_keypad_build_keycode(keypad);
- else
+ } else {
error = pxa27x_keypad_build_keycode_from_dt(keypad);
+ /*
+ * Data that we get from DT resides in dynamically
+ * allocated memory so we need to update our pdata
+ * pointer.
+ */
+ pdata = keypad->pdata;
+ }
if (error) {
dev_err(&pdev->dev, "failed to build keycode\n");
goto failed_put_clk;
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index 082684e..9365535 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -351,7 +351,9 @@
if (status) {
if (status == -ESHUTDOWN)
return;
- dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status);
+ dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
+ __func__, status);
+ goto out;
}
/* Special keys */
@@ -418,8 +420,12 @@
dev->ctl_data->byte[2],
dev->ctl_data->byte[3]);
- if (status)
- dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status);
+ if (status) {
+ if (status == -ESHUTDOWN)
+ return;
+ dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
+ __func__, status);
+ }
spin_lock(&dev->ctl_submit_lock);
@@ -427,7 +433,7 @@
if (likely(!dev->shutdown)) {
- if (dev->buzzer_pending) {
+ if (dev->buzzer_pending || status) {
dev->buzzer_pending = 0;
dev->ctl_urb_pending = 1;
cm109_submit_buzz_toggle(dev);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 7c5d72a..8365847 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -103,6 +103,7 @@
/* Dell Latitude E5500, E6400, E6500, Precision M4400 */
{ { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
+ { { 0x73, 0x00, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_DUALPOINT }, /* Dell XT2 */
{ { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
{ { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 78e4de4..52c9ebf 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -223,21 +223,26 @@
{
unsigned long flags;
unsigned char data, str;
- int i = 0;
+ int count = 0;
+ int retval = 0;
spin_lock_irqsave(&i8042_lock, flags);
- while (((str = i8042_read_status()) & I8042_STR_OBF) && (i < I8042_BUFFER_SIZE)) {
- udelay(50);
- data = i8042_read_data();
- i++;
- dbg("%02x <- i8042 (flush, %s)\n",
- data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+ while ((str = i8042_read_status()) & I8042_STR_OBF) {
+ if (count++ < I8042_BUFFER_SIZE) {
+ udelay(50);
+ data = i8042_read_data();
+ dbg("%02x <- i8042 (flush, %s)\n",
+ data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+ } else {
+ retval = -EIO;
+ break;
+ }
}
spin_unlock_irqrestore(&i8042_lock, flags);
- return i;
+ return retval;
}
/*
@@ -849,7 +854,7 @@
static int i8042_controller_check(void)
{
- if (i8042_flush() == I8042_BUFFER_SIZE) {
+ if (i8042_flush()) {
pr_err("No controller found\n");
return -ENODEV;
}
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 79b69ea..e53416a 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -1031,6 +1031,7 @@
}
static enum power_supply_property wacom_battery_props[] = {
+ POWER_SUPPLY_PROP_SCOPE,
POWER_SUPPLY_PROP_CAPACITY
};
@@ -1042,6 +1043,9 @@
int ret = 0;
switch (psp) {
+ case POWER_SUPPLY_PROP_SCOPE:
+ val->intval = POWER_SUPPLY_SCOPE_DEVICE;
+ break;
case POWER_SUPPLY_PROP_CAPACITY:
val->intval =
wacom->wacom_wac.battery_capacity * 100 / 31;
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index b2aa503..c59b797 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -2054,6 +2054,12 @@
static const struct wacom_features wacom_features_0x10D =
{ "Wacom ISDv4 10D", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x10E =
+ { "Wacom ISDv4 10E", WACOM_PKGLEN_MTTPC, 27760, 15694, 255,
+ 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x10F =
+ { "Wacom ISDv4 10F", WACOM_PKGLEN_MTTPC, 27760, 15694, 255,
+ 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x4001 =
{ "Wacom ISDv4 4001", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -2248,6 +2254,8 @@
{ USB_DEVICE_WACOM(0x100) },
{ USB_DEVICE_WACOM(0x101) },
{ USB_DEVICE_WACOM(0x10D) },
+ { USB_DEVICE_WACOM(0x10E) },
+ { USB_DEVICE_WACOM(0x10F) },
{ USB_DEVICE_WACOM(0x300) },
{ USB_DEVICE_WACOM(0x301) },
{ USB_DEVICE_WACOM(0x304) },
diff --git a/drivers/md/md.c b/drivers/md/md.c
index adf4d7e..561a65f 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -8111,6 +8111,7 @@
u64 *p;
int lo, hi;
int rv = 1;
+ unsigned long flags;
if (bb->shift < 0)
/* badblocks are disabled */
@@ -8125,7 +8126,7 @@
sectors = next - s;
}
- write_seqlock_irq(&bb->lock);
+ write_seqlock_irqsave(&bb->lock, flags);
p = bb->page;
lo = 0;
@@ -8241,7 +8242,7 @@
bb->changed = 1;
if (!acknowledged)
bb->unacked_exist = 1;
- write_sequnlock_irq(&bb->lock);
+ write_sequnlock_irqrestore(&bb->lock, flags);
return rv;
}
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index d60412c..aacf6bf 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1479,6 +1479,7 @@
}
}
if (rdev
+ && rdev->recovery_offset == MaxSector
&& !test_bit(Faulty, &rdev->flags)
&& !test_and_set_bit(In_sync, &rdev->flags)) {
count++;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index df7b0a0..73dc8a3 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1782,6 +1782,7 @@
}
sysfs_notify_dirent_safe(tmp->replacement->sysfs_state);
} else if (tmp->rdev
+ && tmp->rdev->recovery_offset == MaxSector
&& !test_bit(Faulty, &tmp->rdev->flags)
&& !test_and_set_bit(In_sync, &tmp->rdev->flags)) {
count++;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 7ff4f25..f8b9068 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -778,6 +778,12 @@
bi->bi_io_vec[0].bv_len = STRIPE_SIZE;
bi->bi_io_vec[0].bv_offset = 0;
bi->bi_size = STRIPE_SIZE;
+ /*
+ * If this is discard request, set bi_vcnt 0. We don't
+ * want to confuse SCSI because SCSI will replace payload
+ */
+ if (rw & REQ_DISCARD)
+ bi->bi_vcnt = 0;
if (rrdev)
set_bit(R5_DOUBLE_LOCKED, &sh->dev[i].flags);
@@ -816,6 +822,12 @@
rbi->bi_io_vec[0].bv_len = STRIPE_SIZE;
rbi->bi_io_vec[0].bv_offset = 0;
rbi->bi_size = STRIPE_SIZE;
+ /*
+ * If this is discard request, set bi_vcnt 0. We don't
+ * want to confuse SCSI because SCSI will replace payload
+ */
+ if (rw & REQ_DISCARD)
+ rbi->bi_vcnt = 0;
if (conf->mddev->gendisk)
trace_block_bio_remap(bdev_get_queue(rbi->bi_bdev),
rbi, disk_devt(conf->mddev->gendisk),
@@ -2910,6 +2922,14 @@
}
/* now that discard is done we can proceed with any sync */
clear_bit(STRIPE_DISCARD, &sh->state);
+ /*
+ * SCSI discard will change some bio fields and the stripe has
+ * no updated data, so remove it from hash list and the stripe
+ * will be reinitialized
+ */
+ spin_lock_irq(&conf->device_lock);
+ remove_hash(sh);
+ spin_unlock_irq(&conf->device_lock);
if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state))
set_bit(STRIPE_HANDLE, &sh->state);
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 59ab069..a9830ff 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -349,7 +349,7 @@
int common_nfc_set_geometry(struct gpmi_nand_data *this)
{
- return set_geometry_by_ecc_info(this) ? 0 : legacy_set_geometry(this);
+ return legacy_set_geometry(this);
}
struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index dd03dfd..c28d4e2 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1320,7 +1320,12 @@
for (cs = 0; cs < pdata->num_cs; cs++) {
struct mtd_info *mtd = info->host[cs]->mtd;
- mtd->name = pdev->name;
+ /*
+ * The mtd name matches the one used in 'mtdparts' kernel
+ * parameter. This name cannot be changed or otherwise
+ * user's mtd partitions configuration would get broken.
+ */
+ mtd->name = "pxa3xx_nand-0";
info->cs = cs;
ret = pxa3xx_nand_scan(mtd);
if (ret) {
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index a668cd4..e3fc07c 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -814,9 +814,6 @@
msg_ctrl_save = priv->read_reg(priv,
C_CAN_IFACE(MSGCTRL_REG, 0));
- if (msg_ctrl_save & IF_MCONT_EOB)
- return num_rx_pkts;
-
if (msg_ctrl_save & IF_MCONT_MSGLST) {
c_can_handle_lost_msg_obj(dev, 0, msg_obj);
num_rx_pkts++;
@@ -824,6 +821,9 @@
continue;
}
+ if (msg_ctrl_save & IF_MCONT_EOB)
+ return num_rx_pkts;
+
if (!(msg_ctrl_save & IF_MCONT_NEWDAT))
continue;
diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
index 3b95465..4b2d5ed 100644
--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c
@@ -1544,9 +1544,9 @@
return 0;
}
-static void kvaser_usb_get_endpoints(const struct usb_interface *intf,
- struct usb_endpoint_descriptor **in,
- struct usb_endpoint_descriptor **out)
+static int kvaser_usb_get_endpoints(const struct usb_interface *intf,
+ struct usb_endpoint_descriptor **in,
+ struct usb_endpoint_descriptor **out)
{
const struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
@@ -1557,12 +1557,18 @@
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
- if (usb_endpoint_is_bulk_in(endpoint))
+ if (!*in && usb_endpoint_is_bulk_in(endpoint))
*in = endpoint;
- if (usb_endpoint_is_bulk_out(endpoint))
+ if (!*out && usb_endpoint_is_bulk_out(endpoint))
*out = endpoint;
+
+ /* use first bulk endpoint for in and out */
+ if (*in && *out)
+ return 0;
}
+
+ return -ENODEV;
}
static int kvaser_usb_probe(struct usb_interface *intf,
@@ -1576,8 +1582,8 @@
if (!dev)
return -ENOMEM;
- kvaser_usb_get_endpoints(intf, &dev->bulk_in, &dev->bulk_out);
- if (!dev->bulk_in || !dev->bulk_out) {
+ err = kvaser_usb_get_endpoints(intf, &dev->bulk_in, &dev->bulk_out);
+ if (err) {
dev_err(&intf->dev, "Cannot get usb endpoint(s)");
return err;
}
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index a98778e..e2aa09c 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -252,25 +252,33 @@
struct bgmac_slot_info *slot)
{
struct device *dma_dev = bgmac->core->dma_dev;
+ struct sk_buff *skb;
+ dma_addr_t dma_addr;
struct bgmac_rx_header *rx;
/* Alloc skb */
- slot->skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE);
- if (!slot->skb)
+ skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE);
+ if (!skb)
return -ENOMEM;
/* Poison - if everything goes fine, hardware will overwrite it */
- rx = (struct bgmac_rx_header *)slot->skb->data;
+ rx = (struct bgmac_rx_header *)skb->data;
rx->len = cpu_to_le16(0xdead);
rx->flags = cpu_to_le16(0xbeef);
/* Map skb for the DMA */
- slot->dma_addr = dma_map_single(dma_dev, slot->skb->data,
- BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
- if (dma_mapping_error(dma_dev, slot->dma_addr)) {
+ dma_addr = dma_map_single(dma_dev, skb->data,
+ BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dma_dev, dma_addr)) {
bgmac_err(bgmac, "DMA mapping error\n");
+ dev_kfree_skb(skb);
return -ENOMEM;
}
+
+ /* Update the slot */
+ slot->skb = skb;
+ slot->dma_addr = dma_addr;
+
if (slot->dma_addr & 0xC0000000)
bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 6e46cff..dcafbda 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2545,10 +2545,6 @@
}
}
- /* Allocated memory for FW statistics */
- if (bnx2x_alloc_fw_stats_mem(bp))
- LOAD_ERROR_EXIT(bp, load_error0);
-
/* need to be done after alloc mem, since it's self adjusting to amount
* of memory available for RSS queues
*/
@@ -2558,6 +2554,10 @@
LOAD_ERROR_EXIT(bp, load_error0);
}
+ /* Allocated memory for FW statistics */
+ if (bnx2x_alloc_fw_stats_mem(bp))
+ LOAD_ERROR_EXIT(bp, load_error0);
+
/* request pf to initialize status blocks */
if (IS_VF(bp)) {
rc = bnx2x_vfpf_init(bp);
@@ -2812,8 +2812,8 @@
if (IS_PF(bp))
bnx2x_clear_pf_load(bp);
load_error0:
- bnx2x_free_fp_mem(bp);
bnx2x_free_fw_stats_mem(bp);
+ bnx2x_free_fp_mem(bp);
bnx2x_free_mem(bp);
return rc;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 71fffad..0216d59 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -2018,6 +2018,8 @@
void bnx2x_iov_remove_one(struct bnx2x *bp)
{
+ int vf_idx;
+
/* if SRIOV is not enabled there's nothing to do */
if (!IS_SRIOV(bp))
return;
@@ -2026,6 +2028,18 @@
pci_disable_sriov(bp->pdev);
DP(BNX2X_MSG_IOV, "sriov disabled\n");
+ /* disable access to all VFs */
+ for (vf_idx = 0; vf_idx < bp->vfdb->sriov.total; vf_idx++) {
+ bnx2x_pretend_func(bp,
+ HW_VF_HANDLE(bp,
+ bp->vfdb->sriov.first_vf_in_pf +
+ vf_idx));
+ DP(BNX2X_MSG_IOV, "disabling internal access for vf %d\n",
+ bp->vfdb->sriov.first_vf_in_pf + vf_idx);
+ bnx2x_vf_enable_internal(bp, 0);
+ bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
+ }
+
/* free vf database */
__bnx2x_iov_free_vfdb(bp);
}
@@ -3197,7 +3211,7 @@
* the "acquire" messages to appear on the VF PF channel.
*/
DP(BNX2X_MSG_IOV, "about to call enable sriov\n");
- pci_disable_sriov(bp->pdev);
+ bnx2x_disable_sriov(bp);
rc = pci_enable_sriov(bp->pdev, req_vfs);
if (rc) {
BNX2X_ERR("pci_enable_sriov failed with %d\n", rc);
diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c
index 9c89dc8..632b318 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c
@@ -1599,7 +1599,8 @@
flits = skb_transport_offset(skb) / 8;
sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
sgl_flits = make_sgl(skb, sgp, skb_transport_header(skb),
- skb->tail - skb->transport_header,
+ skb_tail_pointer(skb) -
+ skb_transport_header(skb),
adap->pdev);
if (need_skb_unmap()) {
setup_deferred_unmapping(skb, adap->pdev, sgp, sgl_flits);
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 2c88ac2..f4825db 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -840,6 +840,16 @@
bool be_is_wol_supported(struct be_adapter *adapter);
bool be_pause_supported(struct be_adapter *adapter);
u32 be_get_fw_log_level(struct be_adapter *adapter);
+
+static inline int fw_major_num(const char *fw_ver)
+{
+ int fw_major = 0;
+
+ sscanf(fw_ver, "%d.", &fw_major);
+
+ return fw_major;
+}
+
int be_update_queues(struct be_adapter *adapter);
int be_poll(struct napi_struct *napi, int budget);
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 8080a1a..741d3bf 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3379,6 +3379,12 @@
be_cmd_get_fw_ver(adapter, adapter->fw_ver, adapter->fw_on_flash);
+ if (BE2_chip(adapter) && fw_major_num(adapter->fw_ver) < 4) {
+ dev_err(dev, "Firmware on card is old(%s), IRQs may not work.",
+ adapter->fw_ver);
+ dev_err(dev, "Please upgrade firmware to version >= 4.0\n");
+ }
+
if (adapter->vlans_added)
be_vid_config(adapter);
diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c
index dac564c..e784751 100644
--- a/drivers/net/ethernet/ibm/emac/mal.c
+++ b/drivers/net/ethernet/ibm/emac/mal.c
@@ -263,7 +263,9 @@
{
if (likely(napi_schedule_prep(&mal->napi))) {
MAL_DBG2(mal, "schedule_poll" NL);
+ spin_lock(&mal->lock);
mal_disable_eob_irq(mal);
+ spin_unlock(&mal->lock);
__napi_schedule(&mal->napi);
} else
MAL_DBG2(mal, "already in poll" NL);
@@ -442,15 +444,13 @@
if (unlikely(mc->ops->peek_rx(mc->dev) ||
test_bit(MAL_COMMAC_RX_STOPPED, &mc->flags))) {
MAL_DBG2(mal, "rotting packet" NL);
- if (napi_reschedule(napi))
- mal_disable_eob_irq(mal);
- else
- MAL_DBG2(mal, "already in poll list" NL);
-
- if (budget > 0)
- goto again;
- else
+ if (!napi_reschedule(napi))
goto more_work;
+
+ spin_lock_irqsave(&mal->lock, flags);
+ mal_disable_eob_irq(mal);
+ spin_unlock_irqrestore(&mal->lock, flags);
+ goto again;
}
mc->ops->poll_tx(mc->dev);
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index 735765c..ae8eb4c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -1691,7 +1691,7 @@
vp_oper->vlan_idx = NO_INDX;
}
if (NO_INDX != vp_oper->mac_idx) {
- __mlx4_unregister_mac(&priv->dev, port, vp_oper->mac_idx);
+ __mlx4_unregister_mac(&priv->dev, port, vp_oper->state.mac);
vp_oper->mac_idx = NO_INDX;
}
}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index a126bdf..a44b939 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -2276,9 +2276,9 @@
temp = (cmd.rsp.arg[8] & 0x7FFE0000) >> 17;
npar_info->max_linkspeed_reg_offset = temp;
}
- if (npar_info->capabilities & QLCNIC_FW_CAPABILITY_MORE_CAPS)
- memcpy(ahw->extra_capability, &cmd.rsp.arg[16],
- sizeof(ahw->extra_capability));
+
+ memcpy(ahw->extra_capability, &cmd.rsp.arg[16],
+ sizeof(ahw->extra_capability));
out:
qlcnic_free_mbx_args(&cmd);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index 73e72eb..6f7f60c 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -785,8 +785,6 @@
#define QLCNIC_ENABLE_IPV4_LRO 1
#define QLCNIC_ENABLE_IPV6_LRO 2
-#define QLCNIC_NO_DEST_IPV4_CHECK (1 << 8)
-#define QLCNIC_NO_DEST_IPV6_CHECK (2 << 8)
int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int enable)
{
@@ -806,11 +804,10 @@
word = 0;
if (enable) {
- word = QLCNIC_ENABLE_IPV4_LRO | QLCNIC_NO_DEST_IPV4_CHECK;
+ word = QLCNIC_ENABLE_IPV4_LRO;
if (adapter->ahw->extra_capability[0] &
QLCNIC_FW_CAP2_HW_LRO_IPV6)
- word |= QLCNIC_ENABLE_IPV6_LRO |
- QLCNIC_NO_DEST_IPV6_CHECK;
+ word |= QLCNIC_ENABLE_IPV6_LRO;
}
req.words[0] = cpu_to_le64(word);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index dcf4a4e..b97e4a0 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -1133,7 +1133,10 @@
if (err == -EIO)
return err;
adapter->ahw->extra_capability[0] = temp;
+ } else {
+ adapter->ahw->extra_capability[0] = 0;
}
+
adapter->ahw->max_mac_filters = nic_info.max_mac_filters;
adapter->ahw->max_mtu = nic_info.max_mtu;
@@ -2161,8 +2164,7 @@
else if (qlcnic_83xx_check(adapter))
fw_cmd = QLCNIC_CMD_83XX_SET_DRV_VER;
- if ((ahw->capabilities & QLCNIC_FW_CAPABILITY_MORE_CAPS) &&
- (ahw->extra_capability[0] & QLCNIC_FW_CAPABILITY_SET_DRV_VER))
+ if (ahw->extra_capability[0] & QLCNIC_FW_CAPABILITY_SET_DRV_VER)
qlcnic_fw_cmd_set_drv_version(adapter, fw_cmd);
}
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index a8ef4c4..ba2f5e7 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -312,6 +312,7 @@
const char *buf,
size_t count)
{
+ unsigned long flags;
int enabled;
int err;
@@ -326,9 +327,7 @@
return -EINVAL;
}
- mutex_lock(&nt->mutex);
if (enabled) { /* 1 */
-
/*
* Skip netpoll_parse_options() -- all the attributes are
* already configured via configfs. Just print them out.
@@ -336,19 +335,22 @@
netpoll_print_options(&nt->np);
err = netpoll_setup(&nt->np);
- if (err) {
- mutex_unlock(&nt->mutex);
+ if (err)
return err;
- }
- pr_info("network logging started\n");
-
+ pr_info("netconsole: network logging started\n");
} else { /* 0 */
+ /* We need to disable the netconsole before cleaning it up
+ * otherwise we might end up in write_msg() with
+ * nt->np.dev == NULL and nt->enabled == 1
+ */
+ spin_lock_irqsave(&target_list_lock, flags);
+ nt->enabled = 0;
+ spin_unlock_irqrestore(&target_list_lock, flags);
netpoll_cleanup(&nt->np);
}
nt->enabled = enabled;
- mutex_unlock(&nt->mutex);
return strnlen(buf, count);
}
@@ -559,8 +561,10 @@
struct netconsole_target_attr *na =
container_of(attr, struct netconsole_target_attr, attr);
+ mutex_lock(&nt->mutex);
if (na->store)
ret = na->store(nt, buf, count);
+ mutex_unlock(&nt->mutex);
return ret;
}
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 846cc19..8e8d0fc 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -78,7 +78,6 @@
#define AX_MEDIUM_STATUS_MODE 0x22
#define AX_MEDIUM_GIGAMODE 0x01
#define AX_MEDIUM_FULL_DUPLEX 0x02
- #define AX_MEDIUM_ALWAYS_ONE 0x04
#define AX_MEDIUM_EN_125MHZ 0x08
#define AX_MEDIUM_RXFLOW_CTRLEN 0x10
#define AX_MEDIUM_TXFLOW_CTRLEN 0x20
@@ -1065,8 +1064,8 @@
/* Configure default medium type => giga */
*tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
- AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE |
- AX_MEDIUM_FULL_DUPLEX | AX_MEDIUM_GIGAMODE;
+ AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX |
+ AX_MEDIUM_GIGAMODE;
ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
2, 2, tmp16);
@@ -1225,7 +1224,7 @@
}
mode = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
- AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE;
+ AX_MEDIUM_RXFLOW_CTRLEN;
ax88179_read_cmd(dev, AX_ACCESS_MAC, PHYSICAL_LINK_STATUS,
1, 1, &link_sts);
@@ -1339,8 +1338,8 @@
/* Configure default medium type => giga */
*tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
- AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE |
- AX_MEDIUM_FULL_DUPLEX | AX_MEDIUM_GIGAMODE;
+ AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX |
+ AX_MEDIUM_GIGAMODE;
ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
2, 2, tmp16);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 113ee93..656a02e 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1160,11 +1160,6 @@
{
struct virtnet_info *vi = container_of(nfb, struct virtnet_info, nb);
- mutex_lock(&vi->config_lock);
-
- if (!vi->config_enable)
- goto done;
-
switch(action & ~CPU_TASKS_FROZEN) {
case CPU_ONLINE:
case CPU_DOWN_FAILED:
@@ -1178,8 +1173,6 @@
break;
}
-done:
- mutex_unlock(&vi->config_lock);
return NOTIFY_OK;
}
@@ -1747,6 +1740,8 @@
struct virtnet_info *vi = vdev->priv;
int i;
+ unregister_hotcpu_notifier(&vi->nb);
+
/* Prevent config work handler from accessing the device */
mutex_lock(&vi->config_lock);
vi->config_enable = false;
@@ -1795,6 +1790,10 @@
virtnet_set_queues(vi, vi->curr_queue_pairs);
rtnl_unlock();
+ err = register_hotcpu_notifier(&vi->nb);
+ if (err)
+ return err;
+
return 0;
}
#endif
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index 5bbcb5e..388ddf6 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -148,10 +148,6 @@
static int emancipate( struct net_device * );
#endif
-#ifdef __i386__
-#define ASM_CRC 1
-#endif
-
static const char version[] =
"Granch SBNI12 driver ver 5.0.1 Jun 22 2001 Denis I.Timofeev.\n";
@@ -1551,88 +1547,6 @@
/* -------------------------------------------------------------------------- */
-#ifdef ASM_CRC
-
-static u32
-calc_crc32( u32 crc, u8 *p, u32 len )
-{
- register u32 _crc;
- _crc = crc;
-
- __asm__ __volatile__ (
- "xorl %%ebx, %%ebx\n"
- "movl %2, %%esi\n"
- "movl %3, %%ecx\n"
- "movl $crc32tab, %%edi\n"
- "shrl $2, %%ecx\n"
- "jz 1f\n"
-
- ".align 4\n"
- "0:\n"
- "movb %%al, %%bl\n"
- "movl (%%esi), %%edx\n"
- "shrl $8, %%eax\n"
- "xorb %%dl, %%bl\n"
- "shrl $8, %%edx\n"
- "xorl (%%edi,%%ebx,4), %%eax\n"
-
- "movb %%al, %%bl\n"
- "shrl $8, %%eax\n"
- "xorb %%dl, %%bl\n"
- "shrl $8, %%edx\n"
- "xorl (%%edi,%%ebx,4), %%eax\n"
-
- "movb %%al, %%bl\n"
- "shrl $8, %%eax\n"
- "xorb %%dl, %%bl\n"
- "movb %%dh, %%dl\n"
- "xorl (%%edi,%%ebx,4), %%eax\n"
-
- "movb %%al, %%bl\n"
- "shrl $8, %%eax\n"
- "xorb %%dl, %%bl\n"
- "addl $4, %%esi\n"
- "xorl (%%edi,%%ebx,4), %%eax\n"
-
- "decl %%ecx\n"
- "jnz 0b\n"
-
- "1:\n"
- "movl %3, %%ecx\n"
- "andl $3, %%ecx\n"
- "jz 2f\n"
-
- "movb %%al, %%bl\n"
- "shrl $8, %%eax\n"
- "xorb (%%esi), %%bl\n"
- "xorl (%%edi,%%ebx,4), %%eax\n"
-
- "decl %%ecx\n"
- "jz 2f\n"
-
- "movb %%al, %%bl\n"
- "shrl $8, %%eax\n"
- "xorb 1(%%esi), %%bl\n"
- "xorl (%%edi,%%ebx,4), %%eax\n"
-
- "decl %%ecx\n"
- "jz 2f\n"
-
- "movb %%al, %%bl\n"
- "shrl $8, %%eax\n"
- "xorb 2(%%esi), %%bl\n"
- "xorl (%%edi,%%ebx,4), %%eax\n"
- "2:\n"
- : "=a" (_crc)
- : "0" (_crc), "g" (p), "g" (len)
- : "bx", "cx", "dx", "si", "di"
- );
-
- return _crc;
-}
-
-#else /* ASM_CRC */
-
static u32
calc_crc32( u32 crc, u8 *p, u32 len )
{
@@ -1642,9 +1556,6 @@
return crc;
}
-#endif /* ASM_CRC */
-
-
static u32 crc32tab[] __attribute__ ((aligned(8))) = {
0xD202EF8D, 0xA505DF1B, 0x3C0C8EA1, 0x4B0BBE37,
0xD56F2B94, 0xA2681B02, 0x3B614AB8, 0x4C667A2E,
diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 55b8dec..08ae01b 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -169,6 +169,7 @@
unsigned long credit_usec;
unsigned long remaining_credit;
struct timer_list credit_timeout;
+ u64 credit_window_start;
/* Statistics */
unsigned long rx_gso_checksum_fixup;
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index e4aa267..b78ee10 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -316,8 +316,7 @@
vif->credit_bytes = vif->remaining_credit = ~0UL;
vif->credit_usec = 0UL;
init_timer(&vif->credit_timeout);
- /* Initialize 'expires' now: it's used to track the credit window. */
- vif->credit_timeout.expires = jiffies;
+ vif->credit_window_start = get_jiffies_64();
dev->netdev_ops = &xenvif_netdev_ops;
dev->hw_features = NETIF_F_SG |
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 828fdab..919b650 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -1380,9 +1380,8 @@
static bool tx_credit_exceeded(struct xenvif *vif, unsigned size)
{
- unsigned long now = jiffies;
- unsigned long next_credit =
- vif->credit_timeout.expires +
+ u64 now = get_jiffies_64();
+ u64 next_credit = vif->credit_window_start +
msecs_to_jiffies(vif->credit_usec / 1000);
/* Timer could already be pending in rare cases. */
@@ -1390,8 +1389,8 @@
return true;
/* Passed the point where we can replenish credit? */
- if (time_after_eq(now, next_credit)) {
- vif->credit_timeout.expires = now;
+ if (time_after_eq64(now, next_credit)) {
+ vif->credit_window_start = now;
tx_add_credit(vif);
}
@@ -1403,6 +1402,7 @@
tx_credit_callback;
mod_timer(&vif->credit_timeout,
next_credit);
+ vif->credit_window_start = next_credit;
return true;
}
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index be12fbf..1ea7523 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -552,9 +552,8 @@
struct acpiphp_func *func;
int max, pass;
LIST_HEAD(add_list);
- int nr_found;
- nr_found = acpiphp_rescan_slot(slot);
+ acpiphp_rescan_slot(slot);
max = acpiphp_max_busnr(bus);
for (pass = 0; pass < 2; pass++) {
list_for_each_entry(dev, &bus->devices, bus_list) {
@@ -574,9 +573,6 @@
}
}
__pci_bus_assign_resources(bus, &add_list, NULL);
- /* Nothing more to do here if there are no new devices on this bus. */
- if (!nr_found && (slot->flags & SLOT_ENABLED))
- return;
acpiphp_sanitize_bus(bus);
acpiphp_set_hpp_values(bus);
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index feab3a5..757eb07 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -696,7 +696,7 @@
while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC,
PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER,
pci_device)) != NULL) {
- struct blogic_adapter *adapter = adapter;
+ struct blogic_adapter *host_adapter = adapter;
struct blogic_adapter_info adapter_info;
enum blogic_isa_ioport mod_ioaddr_req;
unsigned char bus;
@@ -744,9 +744,9 @@
known and enabled, note that the particular Standard ISA I/O
Address should not be probed.
*/
- adapter->io_addr = io_addr;
- blogic_intreset(adapter);
- if (blogic_cmd(adapter, BLOGIC_INQ_PCI_INFO, NULL, 0,
+ host_adapter->io_addr = io_addr;
+ blogic_intreset(host_adapter);
+ if (blogic_cmd(host_adapter, BLOGIC_INQ_PCI_INFO, NULL, 0,
&adapter_info, sizeof(adapter_info)) ==
sizeof(adapter_info)) {
if (adapter_info.isa_port < 6)
@@ -762,7 +762,7 @@
I/O Address assigned at system initialization.
*/
mod_ioaddr_req = BLOGIC_IO_DISABLE;
- blogic_cmd(adapter, BLOGIC_MOD_IOADDR, &mod_ioaddr_req,
+ blogic_cmd(host_adapter, BLOGIC_MOD_IOADDR, &mod_ioaddr_req,
sizeof(mod_ioaddr_req), NULL, 0);
/*
For the first MultiMaster Host Adapter enumerated,
@@ -779,12 +779,12 @@
fetch_localram.offset = BLOGIC_AUTOSCSI_BASE + 45;
fetch_localram.count = sizeof(autoscsi_byte45);
- blogic_cmd(adapter, BLOGIC_FETCH_LOCALRAM,
+ blogic_cmd(host_adapter, BLOGIC_FETCH_LOCALRAM,
&fetch_localram, sizeof(fetch_localram),
&autoscsi_byte45,
sizeof(autoscsi_byte45));
- blogic_cmd(adapter, BLOGIC_GET_BOARD_ID, NULL, 0, &id,
- sizeof(id));
+ blogic_cmd(host_adapter, BLOGIC_GET_BOARD_ID, NULL, 0,
+ &id, sizeof(id));
if (id.fw_ver_digit1 == '5')
force_scan_order =
autoscsi_byte45.force_scan_order;
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 408a42e..f0d432c 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -771,6 +771,8 @@
static int aac_compat_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
{
struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata;
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
return aac_compat_do_ioctl(dev, cmd, (unsigned long)arg);
}
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 2ef497e..ee5c183 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -20,7 +20,7 @@
* | Device Discovery | 0x2095 | 0x2020-0x2022, |
* | | | 0x2011-0x2012, |
* | | | 0x2016 |
- * | Queue Command and IO tracing | 0x3058 | 0x3006-0x300b |
+ * | Queue Command and IO tracing | 0x3059 | 0x3006-0x300b |
* | | | 0x3027-0x3028 |
* | | | 0x303d-0x3041 |
* | | | 0x302d,0x3033 |
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index df1b30b..ff9c86b 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1957,6 +1957,15 @@
que = MSW(sts->handle);
req = ha->req_q_map[que];
+ /* Check for invalid queue pointer */
+ if (req == NULL ||
+ que >= find_first_zero_bit(ha->req_qid_map, ha->max_req_queues)) {
+ ql_dbg(ql_dbg_io, vha, 0x3059,
+ "Invalid status handle (0x%x): Bad req pointer. req=%p, "
+ "que=%u.\n", sts->handle, req, que);
+ return;
+ }
+
/* Validate handle. */
if (handle < req->num_outstanding_cmds)
sp = req->outstanding_cmds[handle];
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index e62d17d..5693f6d7 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2854,6 +2854,7 @@
gd->events |= DISK_EVENT_MEDIA_CHANGE;
}
+ blk_pm_runtime_init(sdp->request_queue, dev);
add_disk(gd);
if (sdkp->capacity)
sd_dif_config_host(sdkp);
@@ -2862,7 +2863,6 @@
sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
sdp->removable ? "removable " : "");
- blk_pm_runtime_init(sdp->request_queue, dev);
scsi_autopm_put_device(sdp);
put_device(&sdkp->dev);
}
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 5cbc4bb..df5e961 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -105,8 +105,11 @@
static int sg_add(struct device *, struct class_interface *);
static void sg_remove(struct device *, struct class_interface *);
+static DEFINE_SPINLOCK(sg_open_exclusive_lock);
+
static DEFINE_IDR(sg_index_idr);
-static DEFINE_RWLOCK(sg_index_lock);
+static DEFINE_RWLOCK(sg_index_lock); /* Also used to lock
+ file descriptor list for device */
static struct class_interface sg_interface = {
.add_dev = sg_add,
@@ -143,7 +146,8 @@
} Sg_request;
typedef struct sg_fd { /* holds the state of a file descriptor */
- struct list_head sfd_siblings; /* protected by sfd_lock of device */
+ /* sfd_siblings is protected by sg_index_lock */
+ struct list_head sfd_siblings;
struct sg_device *parentdp; /* owning device */
wait_queue_head_t read_wait; /* queue read until command done */
rwlock_t rq_list_lock; /* protect access to list in req_arr */
@@ -166,12 +170,13 @@
typedef struct sg_device { /* holds the state of each scsi generic device */
struct scsi_device *device;
+ wait_queue_head_t o_excl_wait; /* queue open() when O_EXCL in use */
int sg_tablesize; /* adapter's max scatter-gather table size */
u32 index; /* device index number */
- spinlock_t sfd_lock; /* protect file descriptor list for device */
+ /* sfds is protected by sg_index_lock */
struct list_head sfds;
- struct rw_semaphore o_sem; /* exclude open should hold this rwsem */
volatile char detached; /* 0->attached, 1->detached pending removal */
+ /* exclude protected by sg_open_exclusive_lock */
char exclude; /* opened for exclusive access */
char sgdebug; /* 0->off, 1->sense, 9->dump dev, 10-> all devs */
struct gendisk *disk;
@@ -220,14 +225,35 @@
return blk_verify_command(cmd, filp->f_mode & FMODE_WRITE);
}
+static int get_exclude(Sg_device *sdp)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&sg_open_exclusive_lock, flags);
+ ret = sdp->exclude;
+ spin_unlock_irqrestore(&sg_open_exclusive_lock, flags);
+ return ret;
+}
+
+static int set_exclude(Sg_device *sdp, char val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&sg_open_exclusive_lock, flags);
+ sdp->exclude = val;
+ spin_unlock_irqrestore(&sg_open_exclusive_lock, flags);
+ return val;
+}
+
static int sfds_list_empty(Sg_device *sdp)
{
unsigned long flags;
int ret;
- spin_lock_irqsave(&sdp->sfd_lock, flags);
+ read_lock_irqsave(&sg_index_lock, flags);
ret = list_empty(&sdp->sfds);
- spin_unlock_irqrestore(&sdp->sfd_lock, flags);
+ read_unlock_irqrestore(&sg_index_lock, flags);
return ret;
}
@@ -239,6 +265,7 @@
struct request_queue *q;
Sg_device *sdp;
Sg_fd *sfp;
+ int res;
int retval;
nonseekable_open(inode, filp);
@@ -267,52 +294,54 @@
goto error_out;
}
- if ((flags & O_EXCL) && (O_RDONLY == (flags & O_ACCMODE))) {
- retval = -EPERM; /* Can't lock it with read only access */
+ if (flags & O_EXCL) {
+ if (O_RDONLY == (flags & O_ACCMODE)) {
+ retval = -EPERM; /* Can't lock it with read only access */
+ goto error_out;
+ }
+ if (!sfds_list_empty(sdp) && (flags & O_NONBLOCK)) {
+ retval = -EBUSY;
+ goto error_out;
+ }
+ res = wait_event_interruptible(sdp->o_excl_wait,
+ ((!sfds_list_empty(sdp) || get_exclude(sdp)) ? 0 : set_exclude(sdp, 1)));
+ if (res) {
+ retval = res; /* -ERESTARTSYS because signal hit process */
+ goto error_out;
+ }
+ } else if (get_exclude(sdp)) { /* some other fd has an exclusive lock on dev */
+ if (flags & O_NONBLOCK) {
+ retval = -EBUSY;
+ goto error_out;
+ }
+ res = wait_event_interruptible(sdp->o_excl_wait, !get_exclude(sdp));
+ if (res) {
+ retval = res; /* -ERESTARTSYS because signal hit process */
+ goto error_out;
+ }
+ }
+ if (sdp->detached) {
+ retval = -ENODEV;
goto error_out;
}
- if (flags & O_NONBLOCK) {
- if (flags & O_EXCL) {
- if (!down_write_trylock(&sdp->o_sem)) {
- retval = -EBUSY;
- goto error_out;
- }
- } else {
- if (!down_read_trylock(&sdp->o_sem)) {
- retval = -EBUSY;
- goto error_out;
- }
- }
- } else {
- if (flags & O_EXCL)
- down_write(&sdp->o_sem);
- else
- down_read(&sdp->o_sem);
- }
- /* Since write lock is held, no need to check sfd_list */
- if (flags & O_EXCL)
- sdp->exclude = 1; /* used by release lock */
-
if (sfds_list_empty(sdp)) { /* no existing opens on this device */
sdp->sgdebug = 0;
q = sdp->device->request_queue;
sdp->sg_tablesize = queue_max_segments(q);
}
- sfp = sg_add_sfp(sdp, dev);
- if (!IS_ERR(sfp))
+ if ((sfp = sg_add_sfp(sdp, dev)))
filp->private_data = sfp;
- /* retval is already provably zero at this point because of the
- * check after retval = scsi_autopm_get_device(sdp->device))
- */
else {
- retval = PTR_ERR(sfp);
-
if (flags & O_EXCL) {
- sdp->exclude = 0; /* undo if error */
- up_write(&sdp->o_sem);
- } else
- up_read(&sdp->o_sem);
+ set_exclude(sdp, 0); /* undo if error */
+ wake_up_interruptible(&sdp->o_excl_wait);
+ }
+ retval = -ENOMEM;
+ goto error_out;
+ }
+ retval = 0;
error_out:
+ if (retval) {
scsi_autopm_put_device(sdp->device);
sdp_put:
scsi_device_put(sdp->device);
@@ -329,18 +358,13 @@
{
Sg_device *sdp;
Sg_fd *sfp;
- int excl;
if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp)))
return -ENXIO;
SCSI_LOG_TIMEOUT(3, printk("sg_release: %s\n", sdp->disk->disk_name));
- excl = sdp->exclude;
- sdp->exclude = 0;
- if (excl)
- up_write(&sdp->o_sem);
- else
- up_read(&sdp->o_sem);
+ set_exclude(sdp, 0);
+ wake_up_interruptible(&sdp->o_excl_wait);
scsi_autopm_put_device(sdp->device);
kref_put(&sfp->f_ref, sg_remove_sfp);
@@ -1391,9 +1415,8 @@
disk->first_minor = k;
sdp->disk = disk;
sdp->device = scsidp;
- spin_lock_init(&sdp->sfd_lock);
INIT_LIST_HEAD(&sdp->sfds);
- init_rwsem(&sdp->o_sem);
+ init_waitqueue_head(&sdp->o_excl_wait);
sdp->sg_tablesize = queue_max_segments(q);
sdp->index = k;
kref_init(&sdp->d_ref);
@@ -1526,13 +1549,11 @@
/* Need a write lock to set sdp->detached. */
write_lock_irqsave(&sg_index_lock, iflags);
- spin_lock(&sdp->sfd_lock);
sdp->detached = 1;
list_for_each_entry(sfp, &sdp->sfds, sfd_siblings) {
wake_up_interruptible(&sfp->read_wait);
kill_fasync(&sfp->async_qp, SIGPOLL, POLL_HUP);
}
- spin_unlock(&sdp->sfd_lock);
write_unlock_irqrestore(&sg_index_lock, iflags);
sysfs_remove_link(&scsidp->sdev_gendev.kobj, "generic");
@@ -2043,7 +2064,7 @@
sfp = kzalloc(sizeof(*sfp), GFP_ATOMIC | __GFP_NOWARN);
if (!sfp)
- return ERR_PTR(-ENOMEM);
+ return NULL;
init_waitqueue_head(&sfp->read_wait);
rwlock_init(&sfp->rq_list_lock);
@@ -2057,13 +2078,9 @@
sfp->cmd_q = SG_DEF_COMMAND_Q;
sfp->keep_orphan = SG_DEF_KEEP_ORPHAN;
sfp->parentdp = sdp;
- spin_lock_irqsave(&sdp->sfd_lock, iflags);
- if (sdp->detached) {
- spin_unlock_irqrestore(&sdp->sfd_lock, iflags);
- return ERR_PTR(-ENODEV);
- }
+ write_lock_irqsave(&sg_index_lock, iflags);
list_add_tail(&sfp->sfd_siblings, &sdp->sfds);
- spin_unlock_irqrestore(&sdp->sfd_lock, iflags);
+ write_unlock_irqrestore(&sg_index_lock, iflags);
SCSI_LOG_TIMEOUT(3, printk("sg_add_sfp: sfp=0x%p\n", sfp));
if (unlikely(sg_big_buff != def_reserved_size))
sg_big_buff = def_reserved_size;
@@ -2113,9 +2130,10 @@
struct sg_device *sdp = sfp->parentdp;
unsigned long iflags;
- spin_lock_irqsave(&sdp->sfd_lock, iflags);
+ write_lock_irqsave(&sg_index_lock, iflags);
list_del(&sfp->sfd_siblings);
- spin_unlock_irqrestore(&sdp->sfd_lock, iflags);
+ write_unlock_irqrestore(&sg_index_lock, iflags);
+ wake_up_interruptible(&sdp->o_excl_wait);
INIT_WORK(&sfp->ew.work, sg_remove_sfp_usercontext);
schedule_work(&sfp->ew.work);
@@ -2502,7 +2520,7 @@
return 0;
}
-/* must be called while holding sg_index_lock and sfd_lock */
+/* must be called while holding sg_index_lock */
static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp)
{
int k, m, new_interface, blen, usg;
@@ -2587,26 +2605,22 @@
read_lock_irqsave(&sg_index_lock, iflags);
sdp = it ? sg_lookup_dev(it->index) : NULL;
- if (sdp) {
- spin_lock(&sdp->sfd_lock);
- if (!list_empty(&sdp->sfds)) {
- struct scsi_device *scsidp = sdp->device;
+ if (sdp && !list_empty(&sdp->sfds)) {
+ struct scsi_device *scsidp = sdp->device;
- seq_printf(s, " >>> device=%s ", sdp->disk->disk_name);
- if (sdp->detached)
- seq_printf(s, "detached pending close ");
- else
- seq_printf
- (s, "scsi%d chan=%d id=%d lun=%d em=%d",
- scsidp->host->host_no,
- scsidp->channel, scsidp->id,
- scsidp->lun,
- scsidp->host->hostt->emulated);
- seq_printf(s, " sg_tablesize=%d excl=%d\n",
- sdp->sg_tablesize, sdp->exclude);
- sg_proc_debug_helper(s, sdp);
- }
- spin_unlock(&sdp->sfd_lock);
+ seq_printf(s, " >>> device=%s ", sdp->disk->disk_name);
+ if (sdp->detached)
+ seq_printf(s, "detached pending close ");
+ else
+ seq_printf
+ (s, "scsi%d chan=%d id=%d lun=%d em=%d",
+ scsidp->host->host_no,
+ scsidp->channel, scsidp->id,
+ scsidp->lun,
+ scsidp->host->hostt->emulated);
+ seq_printf(s, " sg_tablesize=%d excl=%d\n",
+ sdp->sg_tablesize, get_exclude(sdp));
+ sg_proc_debug_helper(s, sdp);
}
read_unlock_irqrestore(&sg_index_lock, iflags);
return 0;
diff --git a/drivers/staging/bcm/Bcmchar.c b/drivers/staging/bcm/Bcmchar.c
index f91bc1f..639ba96 100644
--- a/drivers/staging/bcm/Bcmchar.c
+++ b/drivers/staging/bcm/Bcmchar.c
@@ -1960,6 +1960,7 @@
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Called IOCTL_BCM_GET_DEVICE_DRIVER_INFO\n");
+ memset(&DevInfo, 0, sizeof(DevInfo));
DevInfo.MaxRDMBufferSize = BUFFER_4K;
DevInfo.u32DSDStartOffset = EEPROM_CALPARAM_START;
DevInfo.u32RxAlignmentCorrection = 0;
diff --git a/drivers/staging/ozwpan/ozcdev.c b/drivers/staging/ozwpan/ozcdev.c
index 6ccb64f..6ce0af9 100644
--- a/drivers/staging/ozwpan/ozcdev.c
+++ b/drivers/staging/ozwpan/ozcdev.c
@@ -155,6 +155,9 @@
struct oz_app_hdr *app_hdr;
struct oz_serial_ctx *ctx;
+ if (count > sizeof(ei->data) - sizeof(*elt) - sizeof(*app_hdr))
+ return -EINVAL;
+
spin_lock_bh(&g_cdev.lock);
pd = g_cdev.active_pd;
if (pd)
diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c
index 23db32f..a10cdb1 100644
--- a/drivers/staging/sb105x/sb_pci_mp.c
+++ b/drivers/staging/sb105x/sb_pci_mp.c
@@ -1063,7 +1063,7 @@
static int mp_get_count(struct sb_uart_state *state, struct serial_icounter_struct *icnt)
{
- struct serial_icounter_struct icount;
+ struct serial_icounter_struct icount = {};
struct sb_uart_icount cnow;
struct sb_uart_port *port = state->port;
diff --git a/drivers/staging/wlags49_h2/wl_priv.c b/drivers/staging/wlags49_h2/wl_priv.c
index c97e0e1..7e10dcd 100644
--- a/drivers/staging/wlags49_h2/wl_priv.c
+++ b/drivers/staging/wlags49_h2/wl_priv.c
@@ -570,6 +570,7 @@
ltv_t *pLtv;
bool_t ltvAllocated = FALSE;
ENCSTRCT sEncryption;
+ size_t len;
#ifdef USE_WDS
hcf_16 hcfPort = HCF_PORT_0;
@@ -686,7 +687,8 @@
break;
case CFG_CNF_OWN_NAME:
memset(lp->StationName, 0, sizeof(lp->StationName));
- memcpy((void *)lp->StationName, (void *)&pLtv->u.u8[2], (size_t)pLtv->u.u16[0]);
+ len = min_t(size_t, pLtv->u.u16[0], sizeof(lp->StationName));
+ strlcpy(lp->StationName, &pLtv->u.u8[2], len);
pLtv->u.u16[0] = CNV_INT_TO_LITTLE(pLtv->u.u16[0]);
break;
case CFG_CNF_LOAD_BALANCING:
@@ -1783,6 +1785,7 @@
{
struct wl_private *lp = wl_priv(dev);
unsigned long flags;
+ size_t len;
int ret = 0;
/*------------------------------------------------------------------------*/
@@ -1793,8 +1796,8 @@
wl_lock(lp, &flags);
memset(lp->StationName, 0, sizeof(lp->StationName));
-
- memcpy(lp->StationName, extra, wrqu->data.length);
+ len = min_t(size_t, wrqu->data.length, sizeof(lp->StationName));
+ strlcpy(lp->StationName, extra, len);
/* Commit the adapter parameters */
wl_apply(lp);
diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index 551c96c..0f199f6 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -134,10 +134,10 @@
* pSCSI Host ID and enable for phba mode
*/
sh = scsi_host_lookup(phv->phv_host_id);
- if (IS_ERR(sh)) {
+ if (!sh) {
pr_err("pSCSI: Unable to locate SCSI Host for"
" phv_host_id: %d\n", phv->phv_host_id);
- return PTR_ERR(sh);
+ return -EINVAL;
}
phv->phv_lld_host = sh;
@@ -515,10 +515,10 @@
sh = phv->phv_lld_host;
} else {
sh = scsi_host_lookup(pdv->pdv_host_id);
- if (IS_ERR(sh)) {
+ if (!sh) {
pr_err("pSCSI: Unable to locate"
" pdv_host_id: %d\n", pdv->pdv_host_id);
- return PTR_ERR(sh);
+ return -EINVAL;
}
}
} else {
diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index 4714c6f..d9b92b2 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -263,6 +263,11 @@
sectors, cmd->se_dev->dev_attrib.max_write_same_len);
return TCM_INVALID_CDB_FIELD;
}
+ /* We always have ANC_SUP == 0 so setting ANCHOR is always an error */
+ if (flags[0] & 0x10) {
+ pr_warn("WRITE SAME with ANCHOR not supported\n");
+ return TCM_INVALID_CDB_FIELD;
+ }
/*
* Special case for WRITE_SAME w/ UNMAP=1 that ends up getting
* translated into block discard requests within backend code.
diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c
index 3da4fd1..474cd44 100644
--- a/drivers/target/target_core_xcopy.c
+++ b/drivers/target/target_core_xcopy.c
@@ -82,6 +82,9 @@
mutex_lock(&g_device_mutex);
list_for_each_entry(se_dev, &g_device_list, g_dev_node) {
+ if (!se_dev->dev_attrib.emulate_3pc)
+ continue;
+
memset(&tmp_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN);
target_xcopy_gen_naa_ieee(se_dev, &tmp_dev_wwn[0]);
@@ -357,6 +360,7 @@
struct se_cmd se_cmd;
struct xcopy_op *xcopy_op;
struct completion xpt_passthrough_sem;
+ unsigned char sense_buffer[TRANSPORT_SENSE_BUFFER];
};
static struct se_port xcopy_pt_port;
@@ -675,7 +679,8 @@
pr_debug("target_xcopy_issue_pt_cmd(): SCSI status: 0x%02x\n",
se_cmd->scsi_status);
- return 0;
+
+ return (se_cmd->scsi_status) ? -EINVAL : 0;
}
static int target_xcopy_read_source(
@@ -708,7 +713,7 @@
(unsigned long long)src_lba, src_sectors, length);
transport_init_se_cmd(se_cmd, &xcopy_pt_tfo, NULL, length,
- DMA_FROM_DEVICE, 0, NULL);
+ DMA_FROM_DEVICE, 0, &xpt_cmd->sense_buffer[0]);
xop->src_pt_cmd = xpt_cmd;
rc = target_xcopy_setup_pt_cmd(xpt_cmd, xop, src_dev, &cdb[0],
@@ -768,7 +773,7 @@
(unsigned long long)dst_lba, dst_sectors, length);
transport_init_se_cmd(se_cmd, &xcopy_pt_tfo, NULL, length,
- DMA_TO_DEVICE, 0, NULL);
+ DMA_TO_DEVICE, 0, &xpt_cmd->sense_buffer[0]);
xop->dst_pt_cmd = xpt_cmd;
rc = target_xcopy_setup_pt_cmd(xpt_cmd, xop, dst_dev, &cdb[0],
@@ -884,30 +889,42 @@
sense_reason_t target_do_xcopy(struct se_cmd *se_cmd)
{
+ struct se_device *dev = se_cmd->se_dev;
struct xcopy_op *xop = NULL;
unsigned char *p = NULL, *seg_desc;
unsigned int list_id, list_id_usage, sdll, inline_dl, sa;
+ sense_reason_t ret = TCM_INVALID_PARAMETER_LIST;
int rc;
unsigned short tdll;
+ if (!dev->dev_attrib.emulate_3pc) {
+ pr_err("EXTENDED_COPY operation explicitly disabled\n");
+ return TCM_UNSUPPORTED_SCSI_OPCODE;
+ }
+
sa = se_cmd->t_task_cdb[1] & 0x1f;
if (sa != 0x00) {
pr_err("EXTENDED_COPY(LID4) not supported\n");
return TCM_UNSUPPORTED_SCSI_OPCODE;
}
+ xop = kzalloc(sizeof(struct xcopy_op), GFP_KERNEL);
+ if (!xop) {
+ pr_err("Unable to allocate xcopy_op\n");
+ return TCM_OUT_OF_RESOURCES;
+ }
+ xop->xop_se_cmd = se_cmd;
+
p = transport_kmap_data_sg(se_cmd);
if (!p) {
pr_err("transport_kmap_data_sg() failed in target_do_xcopy\n");
+ kfree(xop);
return TCM_OUT_OF_RESOURCES;
}
list_id = p[0];
- if (list_id != 0x00) {
- pr_err("XCOPY with non zero list_id: 0x%02x\n", list_id);
- goto out;
- }
- list_id_usage = (p[1] & 0x18);
+ list_id_usage = (p[1] & 0x18) >> 3;
+
/*
* Determine TARGET DESCRIPTOR LIST LENGTH + SEGMENT DESCRIPTOR LIST LENGTH
*/
@@ -920,13 +937,6 @@
goto out;
}
- xop = kzalloc(sizeof(struct xcopy_op), GFP_KERNEL);
- if (!xop) {
- pr_err("Unable to allocate xcopy_op\n");
- goto out;
- }
- xop->xop_se_cmd = se_cmd;
-
pr_debug("Processing XCOPY with list_id: 0x%02x list_id_usage: 0x%02x"
" tdll: %hu sdll: %u inline_dl: %u\n", list_id, list_id_usage,
tdll, sdll, inline_dl);
@@ -935,6 +945,17 @@
if (rc <= 0)
goto out;
+ if (xop->src_dev->dev_attrib.block_size !=
+ xop->dst_dev->dev_attrib.block_size) {
+ pr_err("XCOPY: Non matching src_dev block_size: %u + dst_dev"
+ " block_size: %u currently unsupported\n",
+ xop->src_dev->dev_attrib.block_size,
+ xop->dst_dev->dev_attrib.block_size);
+ xcopy_pt_undepend_remotedev(xop);
+ ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
+ goto out;
+ }
+
pr_debug("XCOPY: Processed %d target descriptors, length: %u\n", rc,
rc * XCOPY_TARGET_DESC_LEN);
seg_desc = &p[16];
@@ -957,7 +978,7 @@
if (p)
transport_kunmap_data_sg(se_cmd);
kfree(xop);
- return TCM_INVALID_CDB_FIELD;
+ return ret;
}
static sense_reason_t target_rcr_operating_parameters(struct se_cmd *se_cmd)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index d067285..6b0f75e 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1499,7 +1499,7 @@
/*
* Get ip name usart or uart
*/
-static int atmel_get_ip_name(struct uart_port *port)
+static void atmel_get_ip_name(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
int name = UART_GET_IP_NAME(port);
@@ -1518,10 +1518,7 @@
atmel_port->is_usart = false;
} else {
dev_err(port->dev, "Not supported ip name, set to uart\n");
- return -EINVAL;
}
-
- return 0;
}
/*
@@ -2405,9 +2402,7 @@
/*
* Get port name of usart or uart
*/
- ret = atmel_get_ip_name(&port->uart);
- if (ret < 0)
- goto err_add_port;
+ atmel_get_ip_name(&port->uart);
return 0;
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index ba47563..0e808cf 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -642,16 +642,29 @@
{
struct uio_device *idev = vma->vm_private_data;
int mi = uio_find_mem_index(vma);
+ struct uio_mem *mem;
if (mi < 0)
return -EINVAL;
+ mem = idev->info->mem + mi;
+
+ if (vma->vm_end - vma->vm_start > mem->size)
+ return -EINVAL;
vma->vm_ops = &uio_physical_vm_ops;
-
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ /*
+ * We cannot use the vm_iomap_memory() helper here,
+ * because vma->vm_pgoff is the map index we looked
+ * up above in uio_find_mem_index(), rather than an
+ * actual page offset into the mmap.
+ *
+ * So we just do the physical mmap without a page
+ * offset.
+ */
return remap_pfn_range(vma,
vma->vm_start,
- idev->info->mem[mi].addr >> PAGE_SHIFT,
+ mem->addr >> PAGE_SHIFT,
vma->vm_end - vma->vm_start,
vma->vm_page_prot);
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c45f9c0..b21d553 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -904,6 +904,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
/* Crucible Devices */
{ USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 1b8af46..a7019d1 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1307,3 +1307,9 @@
* Manufacturer: Crucible Technologies
*/
#define FTDI_CT_COMET_PID 0x8e08
+
+/*
+ * Product: Z3X Box
+ * Manufacturer: Smart GSM Team
+ */
+#define FTDI_Z3X_PID 0x0011
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index bedf8e4..1e6de4c 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -4,11 +4,6 @@
* Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2003 IBM Corp.
*
- * Copyright (C) 2009, 2013 Frank Schäfer <fschaefer.oss@googlemail.com>
- * - fixes, improvements and documentation for the baud rate encoding methods
- * Copyright (C) 2013 Reinhard Max <max@suse.de>
- * - fixes and improvements for the divisor based baud rate encoding method
- *
* Original driver for 2.2.x by anonymous
*
* This program is free software; you can redistribute it and/or
@@ -134,18 +129,10 @@
enum pl2303_type {
- type_0, /* H version ? */
- type_1, /* H version ? */
- HX_TA, /* HX(A) / X(A) / TA version */ /* TODO: improve */
- HXD_EA_RA_SA, /* HXD / EA / RA / SA version */ /* TODO: improve */
- TB, /* TB version */
- HX_CLONE, /* Cheap and less functional clone of the HX chip */
+ type_0, /* don't know the difference between type 0 and */
+ type_1, /* type 1, until someone from prolific tells us... */
+ HX, /* HX version of the pl2303 chip */
};
-/*
- * NOTE: don't know the difference between type 0 and type 1,
- * until someone from Prolific tells us...
- * TODO: distinguish between X/HX, TA and HXD, EA, RA, SA variants
- */
struct pl2303_serial_private {
enum pl2303_type type;
@@ -185,7 +172,6 @@
{
struct pl2303_serial_private *spriv;
enum pl2303_type type = type_0;
- char *type_str = "unknown (treating as type_0)";
unsigned char *buf;
spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
@@ -198,53 +184,15 @@
return -ENOMEM;
}
- if (serial->dev->descriptor.bDeviceClass == 0x02) {
+ if (serial->dev->descriptor.bDeviceClass == 0x02)
type = type_0;
- type_str = "type_0";
- } else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) {
- /*
- * NOTE: The bcdDevice version is the only difference between
- * the device descriptors of the X/HX, HXD, EA, RA, SA, TA, TB
- */
- if (le16_to_cpu(serial->dev->descriptor.bcdDevice) == 0x300) {
- /* Check if the device is a clone */
- pl2303_vendor_read(0x9494, 0, serial, buf);
- /*
- * NOTE: Not sure if this read is really needed.
- * The HX returns 0x00, the clone 0x02, but the Windows
- * driver seems to ignore the value and continues.
- */
- pl2303_vendor_write(0x0606, 0xaa, serial);
- pl2303_vendor_read(0x8686, 0, serial, buf);
- if (buf[0] != 0xaa) {
- type = HX_CLONE;
- type_str = "X/HX clone (limited functionality)";
- } else {
- type = HX_TA;
- type_str = "X/HX/TA";
- }
- pl2303_vendor_write(0x0606, 0x00, serial);
- } else if (le16_to_cpu(serial->dev->descriptor.bcdDevice)
- == 0x400) {
- type = HXD_EA_RA_SA;
- type_str = "HXD/EA/RA/SA";
- } else if (le16_to_cpu(serial->dev->descriptor.bcdDevice)
- == 0x500) {
- type = TB;
- type_str = "TB";
- } else {
- dev_info(&serial->interface->dev,
- "unknown/unsupported device type\n");
- kfree(spriv);
- kfree(buf);
- return -ENODEV;
- }
- } else if (serial->dev->descriptor.bDeviceClass == 0x00
- || serial->dev->descriptor.bDeviceClass == 0xFF) {
+ else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
+ type = HX;
+ else if (serial->dev->descriptor.bDeviceClass == 0x00)
type = type_1;
- type_str = "type_1";
- }
- dev_dbg(&serial->interface->dev, "device type: %s\n", type_str);
+ else if (serial->dev->descriptor.bDeviceClass == 0xFF)
+ type = type_1;
+ dev_dbg(&serial->interface->dev, "device type: %d\n", type);
spriv->type = type;
usb_set_serial_data(serial, spriv);
@@ -259,10 +207,10 @@
pl2303_vendor_read(0x8383, 0, serial, buf);
pl2303_vendor_write(0, 1, serial);
pl2303_vendor_write(1, 0, serial);
- if (type == type_0 || type == type_1)
- pl2303_vendor_write(2, 0x24, serial);
- else
+ if (type == HX)
pl2303_vendor_write(2, 0x44, serial);
+ else
+ pl2303_vendor_write(2, 0x24, serial);
kfree(buf);
return 0;
@@ -316,174 +264,65 @@
return retval;
}
-static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type,
- u8 buf[4])
+static void pl2303_encode_baudrate(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ u8 buf[4])
{
- /*
- * NOTE: Only the values defined in baud_sup are supported !
- * => if unsupported values are set, the PL2303 uses 9600 baud instead
- * => HX clones just don't work at unsupported baud rates < 115200 baud,
- * for baud rates > 115200 they run at 115200 baud
- */
const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
- 4800, 7200, 9600, 14400, 19200, 28800, 38400,
- 57600, 115200, 230400, 460800, 614400, 921600,
- 1228800, 2457600, 3000000, 6000000, 12000000 };
- /*
- * NOTE: With the exception of type_0/1 devices, the following
- * additional baud rates are supported (tested with HX rev. 3A only):
- * 110*, 56000*, 128000, 134400, 161280, 201600, 256000*, 268800,
- * 403200, 806400. (*: not HX and HX clones)
- *
- * Maximum values: HXD, TB: 12000000; HX, TA: 6000000;
- * type_0+1: 1228800; RA: 921600; HX clones, SA: 115200
- *
- * As long as we are not using this encoding method for anything else
- * than the type_0+1, HX and HX clone chips, there is no point in
- * complicating the code to support them.
- */
+ 4800, 7200, 9600, 14400, 19200, 28800, 38400,
+ 57600, 115200, 230400, 460800, 500000, 614400,
+ 921600, 1228800, 2457600, 3000000, 6000000 };
+
+ struct usb_serial *serial = port->serial;
+ struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+ int baud;
int i;
+ /*
+ * NOTE: Only the values defined in baud_sup are supported!
+ * => if unsupported values are set, the PL2303 seems to use
+ * 9600 baud (at least my PL2303X always does)
+ */
+ baud = tty_get_baud_rate(tty);
+ dev_dbg(&port->dev, "baud requested = %d\n", baud);
+ if (!baud)
+ return;
+
/* Set baudrate to nearest supported value */
for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) {
if (baud_sup[i] > baud)
break;
}
+
if (i == ARRAY_SIZE(baud_sup))
baud = baud_sup[i - 1];
else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1]))
baud = baud_sup[i - 1];
else
baud = baud_sup[i];
- /* Respect the chip type specific baud rate limits */
- /*
- * FIXME: as long as we don't know how to distinguish between the
- * HXD, EA, RA, and SA chip variants, allow the max. value of 12M.
- */
- if (type == HX_TA)
- baud = min_t(int, baud, 6000000);
- else if (type == type_0 || type == type_1)
+
+ /* type_0, type_1 only support up to 1228800 baud */
+ if (spriv->type != HX)
baud = min_t(int, baud, 1228800);
- else if (type == HX_CLONE)
- baud = min_t(int, baud, 115200);
- /* Direct (standard) baud rate encoding method */
- put_unaligned_le32(baud, buf);
- return baud;
-}
-
-static int pl2303_baudrate_encode_divisor(int baud, enum pl2303_type type,
- u8 buf[4])
-{
- /*
- * Divisor based baud rate encoding method
- *
- * NOTE: HX clones do NOT support this method.
- * It's not clear if the type_0/1 chips support it.
- *
- * divisor = 12MHz * 32 / baudrate = 2^A * B
- *
- * with
- *
- * A = buf[1] & 0x0e
- * B = buf[0] + (buf[1] & 0x01) << 8
- *
- * Special cases:
- * => 8 < B < 16: device seems to work not properly
- * => B <= 8: device uses the max. value B = 512 instead
- */
- unsigned int A, B;
-
- /*
- * NOTE: The Windows driver allows maximum baud rates of 110% of the
- * specified maximium value.
- * Quick tests with early (2004) HX (rev. A) chips suggest, that even
- * higher baud rates (up to the maximum of 24M baud !) are working fine,
- * but that should really be tested carefully in "real life" scenarios
- * before removing the upper limit completely.
- * Baud rates smaller than the specified 75 baud are definitely working
- * fine.
- */
- if (type == type_0 || type == type_1)
- baud = min_t(int, baud, 1228800 * 1.1);
- else if (type == HX_TA)
- baud = min_t(int, baud, 6000000 * 1.1);
- else if (type == HXD_EA_RA_SA)
- /* HXD, EA: 12Mbps; RA: 1Mbps; SA: 115200 bps */
- /*
- * FIXME: as long as we don't know how to distinguish between
- * these chip variants, allow the max. of these values
- */
- baud = min_t(int, baud, 12000000 * 1.1);
- else if (type == TB)
- baud = min_t(int, baud, 12000000 * 1.1);
- /* Determine factors A and B */
- A = 0;
- B = 12000000 * 32 / baud; /* 12MHz */
- B <<= 1; /* Add one bit for rounding */
- while (B > (512 << 1) && A <= 14) {
- A += 2;
- B >>= 2;
- }
- if (A > 14) { /* max. divisor = min. baudrate reached */
- A = 14;
- B = 512;
- /* => ~45.78 baud */
+ if (baud <= 115200) {
+ put_unaligned_le32(baud, buf);
} else {
- B = (B + 1) >> 1; /* Round the last bit */
- }
- /* Handle special cases */
- if (B == 512)
- B = 0; /* also: 1 to 8 */
- else if (B < 16)
/*
- * NOTE: With the current algorithm this happens
- * only for A=0 and means that the min. divisor
- * (respectively: the max. baudrate) is reached.
+ * Apparently the formula for higher speeds is:
+ * baudrate = 12M * 32 / (2^buf[1]) / buf[0]
*/
- B = 16; /* => 24 MBaud */
- /* Encode the baud rate */
- buf[3] = 0x80; /* Select divisor encoding method */
- buf[2] = 0;
- buf[1] = (A & 0x0e); /* A */
- buf[1] |= ((B & 0x100) >> 8); /* MSB of B */
- buf[0] = B & 0xff; /* 8 LSBs of B */
- /* Calculate the actual/resulting baud rate */
- if (B <= 8)
- B = 512;
- baud = 12000000 * 32 / ((1 << A) * B);
+ unsigned tmp = 12000000 * 32 / baud;
+ buf[3] = 0x80;
+ buf[2] = 0;
+ buf[1] = (tmp >= 256);
+ while (tmp >= 256) {
+ tmp >>= 2;
+ buf[1] <<= 1;
+ }
+ buf[0] = tmp;
+ }
- return baud;
-}
-
-static void pl2303_encode_baudrate(struct tty_struct *tty,
- struct usb_serial_port *port,
- enum pl2303_type type,
- u8 buf[4])
-{
- int baud;
-
- baud = tty_get_baud_rate(tty);
- dev_dbg(&port->dev, "baud requested = %d\n", baud);
- if (!baud)
- return;
- /*
- * There are two methods for setting/encoding the baud rate
- * 1) Direct method: encodes the baud rate value directly
- * => supported by all chip types
- * 2) Divisor based method: encodes a divisor to a base value (12MHz*32)
- * => not supported by HX clones (and likely type_0/1 chips)
- *
- * NOTE: Although the divisor based baud rate encoding method is much
- * more flexible, some of the standard baud rate values can not be
- * realized exactly. But the difference is very small (max. 0.2%) and
- * the device likely uses the same baud rate generator for both methods
- * so that there is likley no difference.
- */
- if (type == type_0 || type == type_1 || type == HX_CLONE)
- baud = pl2303_baudrate_encode_direct(baud, type, buf);
- else
- baud = pl2303_baudrate_encode_divisor(baud, type, buf);
/* Save resulting baud rate */
tty_encode_baud_rate(tty, baud, baud);
dev_dbg(&port->dev, "baud set = %d\n", baud);
@@ -540,8 +379,8 @@
dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
}
- /* For reference: buf[0]:buf[3] baud rate value */
- pl2303_encode_baudrate(tty, port, spriv->type, buf);
+ /* For reference buf[0]:buf[3] baud rate value */
+ pl2303_encode_baudrate(tty, port, &buf[0]);
/* For reference buf[4]=0 is 1 stop bits */
/* For reference buf[4]=1 is 1.5 stop bits */
@@ -618,10 +457,10 @@
dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf);
if (C_CRTSCTS(tty)) {
- if (spriv->type == type_0 || spriv->type == type_1)
- pl2303_vendor_write(0x0, 0x41, serial);
- else
+ if (spriv->type == HX)
pl2303_vendor_write(0x0, 0x61, serial);
+ else
+ pl2303_vendor_write(0x0, 0x41, serial);
} else {
pl2303_vendor_write(0x0, 0x0, serial);
}
@@ -658,7 +497,7 @@
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
int result;
- if (spriv->type == type_0 || spriv->type == type_1) {
+ if (spriv->type != HX) {
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
} else {
@@ -833,7 +672,6 @@
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
0, NULL, 0, 100);
- /* NOTE: HX clones don't support sending breaks, -EPIPE is returned */
if (result)
dev_err(&port->dev, "error sending break = %d\n", result);
}
diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c
index ce5221f..e663921 100644
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -1056,7 +1056,7 @@
if (data_direction != DMA_NONE) {
ret = vhost_scsi_map_iov_to_sgl(cmd,
&vq->iov[data_first], data_num,
- data_direction == DMA_TO_DEVICE);
+ data_direction == DMA_FROM_DEVICE);
if (unlikely(ret)) {
vq_err(vq, "Failed to map iov to sgl\n");
goto err_free;
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index a54ccdc..22ad8524 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -361,37 +361,13 @@
int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
{
struct au1100fb_device *fbdev;
- unsigned int len;
- unsigned long start=0, off;
fbdev = to_au1100fb_device(fbi);
- if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
- return -EINVAL;
- }
-
- start = fbdev->fb_phys & PAGE_MASK;
- len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len);
-
- off = vma->vm_pgoff << PAGE_SHIFT;
-
- if ((vma->vm_end - vma->vm_start + off) > len) {
- return -EINVAL;
- }
-
- off += start;
- vma->vm_pgoff = off >> PAGE_SHIFT;
-
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
pgprot_val(vma->vm_page_prot) |= (6 << 9); //CCA=6
- if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot)) {
- return -EAGAIN;
- }
-
- return 0;
+ return vm_iomap_memory(vma, fbdev->fb_phys, fbdev->fb_len);
}
static struct fb_ops au1100fb_ops =
diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c
index 301224e..1d02897 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/au1200fb.c
@@ -1233,34 +1233,13 @@
* method mainly to allow the use of the TLB streaming flag (CCA=6)
*/
static int au1200fb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-
{
- unsigned int len;
- unsigned long start=0, off;
struct au1200fb_device *fbdev = info->par;
- if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
- return -EINVAL;
- }
-
- start = fbdev->fb_phys & PAGE_MASK;
- len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len);
-
- off = vma->vm_pgoff << PAGE_SHIFT;
-
- if ((vma->vm_end - vma->vm_start + off) > len) {
- return -EINVAL;
- }
-
- off += start;
- vma->vm_pgoff = off >> PAGE_SHIFT;
-
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
pgprot_val(vma->vm_page_prot) |= _CACHE_MASK; /* CCA=7 */
- return io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
+ return vm_iomap_memory(vma, fbdev->fb_phys, fbdev->fb_len);
}
static void set_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata)