ARM: imx: merge plat-mxc into mach-imx
It's really unnecessary to have plat-mxc, and let's merge it into
mach-imx. It's pretty much just a bunch of file renaming and
Kconfig/Makefile merge.
To make the change less invasive, we keep using Kconfig symbol
CONFIG_ARCH_MXC for mach-imx sub-architecture.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c
new file mode 100644
index 0000000..5c10ad0
--- /dev/null
+++ b/arch/arm/mach-imx/3ds_debugboard.c
@@ -0,0 +1,213 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/smsc911x.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+
+#include <mach/hardware.h>
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR(n) (n + 0x0)
+/* External UART */
+#define UARTA_BASE_ADDR(n) (n + 0x8000)
+#define UARTB_BASE_ADDR(n) (n + 0x10000)
+
+#define BOARD_IO_ADDR(n) (n + 0x20000)
+/* LED switchs */
+#define LED_SWITCH_REG 0x00
+/* buttons */
+#define SWITCH_BUTTONS_REG 0x08
+/* status, interrupt */
+#define INTR_STATUS_REG 0x10
+#define INTR_MASK_REG 0x38
+#define INTR_RESET_REG 0x20
+/* magic word for debug CPLD */
+#define MAGIC_NUMBER1_REG 0x40
+#define MAGIC_NUMBER2_REG 0x48
+/* CPLD code version */
+#define CPLD_CODE_VER_REG 0x50
+/* magic word for debug CPLD */
+#define MAGIC_NUMBER3_REG 0x58
+/* module reset register*/
+#define MODULE_RESET_REG 0x60
+/* CPU ID and Personality ID */
+#define MCU_BOARD_ID_REG 0x68
+
+#define MXC_MAX_EXP_IO_LINES 16
+
+/* interrupts like external uart , external ethernet etc*/
+#define EXPIO_INT_ENET 0
+#define EXPIO_INT_XUART_A 1
+#define EXPIO_INT_XUART_B 2
+#define EXPIO_INT_BUTTON_A 3
+#define EXPIO_INT_BUTTON_B 4
+
+static void __iomem *brd_io;
+static struct irq_domain *domain;
+
+static struct resource smsc911x_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ } , {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc_lan9217_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+};
+
+static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+ u32 imr_val;
+ u32 int_valid;
+ u32 expio_irq;
+
+ /* irq = gpio irq number */
+ desc->irq_data.chip->irq_mask(&desc->irq_data);
+
+ imr_val = __raw_readw(brd_io + INTR_MASK_REG);
+ int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
+
+ expio_irq = 0;
+ for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+ if ((int_valid & 1) == 0)
+ continue;
+ generic_handle_irq(irq_find_mapping(domain, expio_irq));
+ }
+
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * Irq is an expio virtual irq number
+ */
+static void expio_mask_irq(struct irq_data *d)
+{
+ u16 reg;
+ u32 expio = d->hwirq;
+
+ reg = __raw_readw(brd_io + INTR_MASK_REG);
+ reg |= (1 << expio);
+ __raw_writew(reg, brd_io + INTR_MASK_REG);
+}
+
+static void expio_ack_irq(struct irq_data *d)
+{
+ u32 expio = d->hwirq;
+
+ __raw_writew(1 << expio, brd_io + INTR_RESET_REG);
+ __raw_writew(0, brd_io + INTR_RESET_REG);
+ expio_mask_irq(d);
+}
+
+static void expio_unmask_irq(struct irq_data *d)
+{
+ u16 reg;
+ u32 expio = d->hwirq;
+
+ reg = __raw_readw(brd_io + INTR_MASK_REG);
+ reg &= ~(1 << expio);
+ __raw_writew(reg, brd_io + INTR_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+ .irq_ack = expio_ack_irq,
+ .irq_mask = expio_mask_irq,
+ .irq_unmask = expio_unmask_irq,
+};
+
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+};
+
+int __init mxc_expio_init(u32 base, u32 intr_gpio)
+{
+ u32 p_irq = gpio_to_irq(intr_gpio);
+ int irq_base;
+ int i;
+
+ brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K);
+ if (brd_io == NULL)
+ return -ENOMEM;
+
+ if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
+ (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
+ (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
+ pr_info("3-Stack Debug board not detected\n");
+ iounmap(brd_io);
+ brd_io = NULL;
+ return -ENODEV;
+ }
+
+ pr_info("3-Stack Debug board detected, rev = 0x%04X\n",
+ readw(brd_io + CPLD_CODE_VER_REG));
+
+ /*
+ * Configure INT line as GPIO input
+ */
+ gpio_request(intr_gpio, "expio_pirq");
+ gpio_direction_input(intr_gpio);
+
+ /* disable the interrupt and clear the status */
+ __raw_writew(0, brd_io + INTR_MASK_REG);
+ __raw_writew(0xFFFF, brd_io + INTR_RESET_REG);
+ __raw_writew(0, brd_io + INTR_RESET_REG);
+ __raw_writew(0x1F, brd_io + INTR_MASK_REG);
+
+ irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
+ WARN_ON(irq_base < 0);
+
+ domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ WARN_ON(!domain);
+
+ for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) {
+ irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ irq_set_irq_type(p_irq, IRQF_TRIGGER_LOW);
+ irq_set_chained_handler(p_irq, mxc_expio_irq_handler);
+
+ /* Register Lan device on the debugboard */
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+ smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
+ smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
+ smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET);
+ smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET);
+ platform_device_register(&smsc_lan9217_device);
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index dffa273..05ded37 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,3 +1,54 @@
+if ARCH_MXC
+
+config MXC_IRQ_PRIOR
+ bool "Use IRQ priority"
+ help
+ Select this if you want to use prioritized IRQ handling.
+ This feature prevents higher priority ISR to be interrupted
+ by lower priority IRQ even IRQF_DISABLED flag is not set.
+ This may be useful in embedded applications, where are strong
+ requirements for timing.
+ Say N here, unless you have a specialized requirement.
+
+config MXC_TZIC
+ bool
+
+config MXC_AVIC
+ bool
+
+config MXC_DEBUG_BOARD
+ bool "Enable MXC debug board(for 3-stack)"
+ help
+ The debug board is an integral part of the MXC 3-stack(PDK)
+ platforms, it can be attached or removed from the peripheral
+ board. On debug board, several debug devices(ethernet, UART,
+ buttons, LEDs and JTAG) are implemented. Between the MCU and
+ these devices, a CPLD is added as a bridge which performs
+ data/address de-multiplexing and decode, signal level shift,
+ interrupt control and various board functions.
+
+config HAVE_EPIT
+ bool
+
+config MXC_USE_EPIT
+ bool "Use EPIT instead of GPT"
+ depends on HAVE_EPIT
+ help
+ Use EPIT as the system timer on systems that have it. Normally you
+ don't have a reason to do so as the EPIT has the same features and
+ uses the same clocks as the GPT. Anyway, on some systems the GPT
+ may be in use for other purposes.
+
+config MXC_ULPI
+ bool
+
+config ARCH_HAS_RNGA
+ bool
+
+config IRAM_ALLOC
+ bool
+ select GENERIC_ALLOCATOR
+
config HAVE_IMX_GPC
bool
@@ -110,6 +161,20 @@
select PINCTRL_IMX51
select SOC_IMX5
+menu "Freescale MXC Implementations"
+
+choice
+ prompt "Freescale CPU family:"
+ default ARCH_IMX_V6_V7
+
+config ARCH_IMX_V4_V5
+ bool "i.MX1, i.MX21, i.MX25, i.MX27"
+ select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR if !ZBOOT_ROM
+ help
+ This enables support for systems based on the Freescale i.MX ARMv4
+ and ARMv5 SoCs
+
if ARCH_IMX_V4_V5
comment "MX1 platforms:"
@@ -390,6 +455,15 @@
endif
+config ARCH_IMX_V6_V7
+ bool "i.MX3, i.MX5, i.MX6"
+ select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR if !ZBOOT_ROM
+ select MIGHT_HAVE_CACHE_L2X0
+ help
+ This enables support for systems based on the Freescale i.MX3, i.MX5
+ and i.MX6 family.
+
if ARCH_IMX_V6_V7
comment "MX31 platforms:"
@@ -773,4 +847,10 @@
endif
+endchoice
+
+endmenu
+
source "arch/arm/mach-imx/devices/Kconfig"
+
+endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 257893e..fe47b71 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,3 +1,5 @@
+obj-y := time.o cpu.o system.o irq-common.o
+
obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
@@ -18,6 +20,21 @@
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
+obj-$(CONFIG_MXC_TZIC) += tzic.o
+obj-$(CONFIG_MXC_AVIC) += avic.o
+
+obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
+obj-$(CONFIG_MXC_ULPI) += ulpi.o
+obj-$(CONFIG_MXC_USE_EPIT) += epit.o
+obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
+obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+
+ifdef CONFIG_SND_IMX_SOC
+obj-y += ssi-fiq.o
+obj-y += ssi-fiq-ksym.o
+endif
+
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
new file mode 100644
index 0000000..cbd55c3
--- /dev/null
+++ b/arch/arm/mach-imx/avic.c
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <mach/common.h>
+#include <asm/mach/irq.h>
+#include <asm/exception.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+#include "irq-common.h"
+
+#define AVIC_INTCNTL 0x00 /* int control reg */
+#define AVIC_NIMASK 0x04 /* int mask reg */
+#define AVIC_INTENNUM 0x08 /* int enable number reg */
+#define AVIC_INTDISNUM 0x0C /* int disable number reg */
+#define AVIC_INTENABLEH 0x10 /* int enable reg high */
+#define AVIC_INTENABLEL 0x14 /* int enable reg low */
+#define AVIC_INTTYPEH 0x18 /* int type reg high */
+#define AVIC_INTTYPEL 0x1C /* int type reg low */
+#define AVIC_NIPRIORITY(x) (0x20 + 4 * (7 - (x))) /* int priority */
+#define AVIC_NIVECSR 0x40 /* norm int vector/status */
+#define AVIC_FIVECSR 0x44 /* fast int vector/status */
+#define AVIC_INTSRCH 0x48 /* int source reg high */
+#define AVIC_INTSRCL 0x4C /* int source reg low */
+#define AVIC_INTFRCH 0x50 /* int force reg high */
+#define AVIC_INTFRCL 0x54 /* int force reg low */
+#define AVIC_NIPNDH 0x58 /* norm int pending high */
+#define AVIC_NIPNDL 0x5C /* norm int pending low */
+#define AVIC_FIPNDH 0x60 /* fast int pending high */
+#define AVIC_FIPNDL 0x64 /* fast int pending low */
+
+#define AVIC_NUM_IRQS 64
+
+void __iomem *avic_base;
+static struct irq_domain *domain;
+
+static u32 avic_saved_mask_reg[2];
+
+#ifdef CONFIG_MXC_IRQ_PRIOR
+static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
+{
+ struct irq_data *d = irq_get_irq_data(irq);
+ unsigned int temp;
+ unsigned int mask = 0x0F << irq % 8 * 4;
+
+ irq = d->hwirq;
+
+ if (irq >= AVIC_NUM_IRQS)
+ return -EINVAL;
+
+ temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
+ temp &= ~mask;
+ temp |= prio & mask;
+
+ __raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_FIQ
+static int avic_set_irq_fiq(unsigned int irq, unsigned int type)
+{
+ struct irq_data *d = irq_get_irq_data(irq);
+ unsigned int irqt;
+
+ irq = d->hwirq;
+
+ if (irq >= AVIC_NUM_IRQS)
+ return -EINVAL;
+
+ if (irq < AVIC_NUM_IRQS / 2) {
+ irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
+ __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
+ } else {
+ irq -= AVIC_NUM_IRQS / 2;
+ irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
+ __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
+ }
+
+ return 0;
+}
+#endif /* CONFIG_FIQ */
+
+
+static struct mxc_extra_irq avic_extra_irq = {
+#ifdef CONFIG_MXC_IRQ_PRIOR
+ .set_priority = avic_irq_set_priority,
+#endif
+#ifdef CONFIG_FIQ
+ .set_irq_fiq = avic_set_irq_fiq,
+#endif
+};
+
+#ifdef CONFIG_PM
+static void avic_irq_suspend(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct irq_chip_type *ct = gc->chip_types;
+ int idx = d->hwirq >> 5;
+
+ avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask);
+ __raw_writel(gc->wake_active, avic_base + ct->regs.mask);
+}
+
+static void avic_irq_resume(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct irq_chip_type *ct = gc->chip_types;
+ int idx = d->hwirq >> 5;
+
+ __raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
+}
+
+#else
+#define avic_irq_suspend NULL
+#define avic_irq_resume NULL
+#endif
+
+static __init void avic_init_gc(int idx, unsigned int irq_start)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ gc = irq_alloc_generic_chip("mxc-avic", 1, irq_start, avic_base,
+ handle_level_irq);
+ gc->private = &avic_extra_irq;
+ gc->wake_enabled = IRQ_MSK(32);
+
+ ct = gc->chip_types;
+ ct->chip.irq_mask = irq_gc_mask_clr_bit;
+ ct->chip.irq_unmask = irq_gc_mask_set_bit;
+ ct->chip.irq_ack = irq_gc_mask_clr_bit;
+ ct->chip.irq_set_wake = irq_gc_set_wake;
+ ct->chip.irq_suspend = avic_irq_suspend;
+ ct->chip.irq_resume = avic_irq_resume;
+ ct->regs.mask = !idx ? AVIC_INTENABLEL : AVIC_INTENABLEH;
+ ct->regs.ack = ct->regs.mask;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
+}
+
+asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
+{
+ u32 nivector;
+
+ do {
+ nivector = __raw_readl(avic_base + AVIC_NIVECSR) >> 16;
+ if (nivector == 0xffff)
+ break;
+
+ handle_IRQ(irq_find_mapping(domain, nivector), regs);
+ } while (1);
+}
+
+/*
+ * This function initializes the AVIC hardware and disables all the
+ * interrupts. It registers the interrupt enable and disable functions
+ * to the kernel for each interrupt source.
+ */
+void __init mxc_init_irq(void __iomem *irqbase)
+{
+ struct device_node *np;
+ int irq_base;
+ int i;
+
+ avic_base = irqbase;
+
+ /* put the AVIC into the reset value with
+ * all interrupts disabled
+ */
+ __raw_writel(0, avic_base + AVIC_INTCNTL);
+ __raw_writel(0x1f, avic_base + AVIC_NIMASK);
+
+ /* disable all interrupts */
+ __raw_writel(0, avic_base + AVIC_INTENABLEH);
+ __raw_writel(0, avic_base + AVIC_INTENABLEL);
+
+ /* all IRQ no FIQ */
+ __raw_writel(0, avic_base + AVIC_INTTYPEH);
+ __raw_writel(0, avic_base + AVIC_INTTYPEL);
+
+ irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id());
+ WARN_ON(irq_base < 0);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,avic");
+ domain = irq_domain_add_legacy(np, AVIC_NUM_IRQS, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ WARN_ON(!domain);
+
+ for (i = 0; i < AVIC_NUM_IRQS / 32; i++, irq_base += 32)
+ avic_init_gc(i, irq_base);
+
+ /* Set default priority value (0) for all IRQ's */
+ for (i = 0; i < 8; i++)
+ __raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
+
+#ifdef CONFIG_FIQ
+ /* Initialize FIQ */
+ init_FIQ(FIQ_START);
+#endif
+
+ printk(KERN_INFO "MXC IRQ initialized\n");
+}
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
new file mode 100644
index 0000000..220dd6f
--- /dev/null
+++ b/arch/arm/mach-imx/cpu.c
@@ -0,0 +1,44 @@
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+unsigned int __mxc_cpu_type;
+EXPORT_SYMBOL(__mxc_cpu_type);
+
+void mxc_set_cpu_type(unsigned int type)
+{
+ __mxc_cpu_type = type;
+}
+
+void imx_print_silicon_rev(const char *cpu, int srev)
+{
+ if (srev == IMX_CHIP_REVISION_UNKNOWN)
+ pr_info("CPU identified as %s, unknown revision\n", cpu);
+ else
+ pr_info("CPU identified as %s, silicon rev %d.%d\n",
+ cpu, (srev >> 4) & 0xf, srev & 0xf);
+}
+
+void __init imx_set_aips(void __iomem *base)
+{
+ unsigned int reg;
+/*
+ * Set all MPROTx to be non-bufferable, trusted for R/W,
+ * not forced to user-mode.
+ */
+ __raw_writel(0x77777777, base + 0x0);
+ __raw_writel(0x77777777, base + 0x4);
+
+/*
+ * Set all OPACRx to be non-bufferable, to not require
+ * supervisor privilege level for access, allow for
+ * write access and untrusted master access.
+ */
+ __raw_writel(0x0, base + 0x40);
+ __raw_writel(0x0, base + 0x44);
+ __raw_writel(0x0, base + 0x48);
+ __raw_writel(0x0, base + 0x4C);
+ reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+ __raw_writel(reg, base + 0x50);
+}
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
new file mode 100644
index 0000000..b5b6f80
--- /dev/null
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -0,0 +1,205 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * A driver for the Freescale Semiconductor i.MXC CPUfreq module.
+ * The CPUFREQ driver is for controlling CPU frequency. It allows you to change
+ * the CPU clock speed on the fly.
+ */
+
+#include <linux/module.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <mach/hardware.h>
+
+#define CLK32_FREQ 32768
+#define NANOSECOND (1000 * 1000 * 1000)
+
+struct cpu_op *(*get_cpu_op)(int *op);
+
+static int cpu_freq_khz_min;
+static int cpu_freq_khz_max;
+
+static struct clk *cpu_clk;
+static struct cpufreq_frequency_table *imx_freq_table;
+
+static int cpu_op_nr;
+static struct cpu_op *cpu_op_tbl;
+
+static int set_cpu_freq(int freq)
+{
+ int ret = 0;
+ int org_cpu_rate;
+
+ org_cpu_rate = clk_get_rate(cpu_clk);
+ if (org_cpu_rate == freq)
+ return ret;
+
+ ret = clk_set_rate(cpu_clk, freq);
+ if (ret != 0) {
+ printk(KERN_DEBUG "cannot set CPU clock rate\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static int mxc_verify_speed(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ return cpufreq_frequency_table_verify(policy, imx_freq_table);
+}
+
+static unsigned int mxc_get_speed(unsigned int cpu)
+{
+ if (cpu)
+ return 0;
+
+ return clk_get_rate(cpu_clk) / 1000;
+}
+
+static int mxc_set_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ struct cpufreq_freqs freqs;
+ int freq_Hz;
+ int ret = 0;
+ unsigned int index;
+
+ cpufreq_frequency_table_target(policy, imx_freq_table,
+ target_freq, relation, &index);
+ freq_Hz = imx_freq_table[index].frequency * 1000;
+
+ freqs.old = clk_get_rate(cpu_clk) / 1000;
+ freqs.new = freq_Hz / 1000;
+ freqs.cpu = 0;
+ freqs.flags = 0;
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ ret = set_cpu_freq(freq_Hz);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return ret;
+}
+
+static int mxc_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int ret;
+ int i;
+
+ printk(KERN_INFO "i.MXC CPU frequency driver\n");
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ if (!get_cpu_op)
+ return -EINVAL;
+
+ cpu_clk = clk_get(NULL, "cpu_clk");
+ if (IS_ERR(cpu_clk)) {
+ printk(KERN_ERR "%s: failed to get cpu clock\n", __func__);
+ return PTR_ERR(cpu_clk);
+ }
+
+ cpu_op_tbl = get_cpu_op(&cpu_op_nr);
+
+ cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000;
+ cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000;
+
+ imx_freq_table = kmalloc(
+ sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1),
+ GFP_KERNEL);
+ if (!imx_freq_table) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ for (i = 0; i < cpu_op_nr; i++) {
+ imx_freq_table[i].index = i;
+ imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000;
+
+ if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min)
+ cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000;
+
+ if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max)
+ cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000;
+ }
+
+ imx_freq_table[i].index = i;
+ imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+ policy->cur = clk_get_rate(cpu_clk) / 1000;
+ policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
+ policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
+
+ /* Manual states, that PLL stabilizes in two CLK32 periods */
+ policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
+
+ ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n",
+ __func__, ret);
+ goto err;
+ }
+
+ cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu);
+ return 0;
+err:
+ kfree(imx_freq_table);
+err1:
+ clk_put(cpu_clk);
+ return ret;
+}
+
+static int mxc_cpufreq_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+
+ set_cpu_freq(cpu_freq_khz_max * 1000);
+ clk_put(cpu_clk);
+ kfree(imx_freq_table);
+ return 0;
+}
+
+static struct cpufreq_driver mxc_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = mxc_verify_speed,
+ .target = mxc_set_target,
+ .get = mxc_get_speed,
+ .init = mxc_cpufreq_init,
+ .exit = mxc_cpufreq_exit,
+ .name = "imx",
+};
+
+static int __devinit mxc_cpufreq_driver_init(void)
+{
+ return cpufreq_register_driver(&mxc_driver);
+}
+
+static void mxc_cpufreq_driver_exit(void)
+{
+ cpufreq_unregister_driver(&mxc_driver);
+}
+
+module_init(mxc_cpufreq_driver_init);
+module_exit(mxc_cpufreq_driver_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>");
+MODULE_DESCRIPTION("CPUfreq driver for i.MX");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-imx/cpuidle.c b/arch/arm/mach-imx/cpuidle.c
new file mode 100644
index 0000000..d4cb511
--- /dev/null
+++ b/arch/arm/mach-imx/cpuidle.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/err.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+static struct cpuidle_device __percpu * imx_cpuidle_devices;
+
+static void __init imx_cpuidle_devices_uninit(void)
+{
+ int cpu_id;
+ struct cpuidle_device *dev;
+
+ for_each_possible_cpu(cpu_id) {
+ dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id);
+ cpuidle_unregister_device(dev);
+ }
+
+ free_percpu(imx_cpuidle_devices);
+}
+
+int __init imx_cpuidle_init(struct cpuidle_driver *drv)
+{
+ struct cpuidle_device *dev;
+ int cpu_id, ret;
+
+ if (drv->state_count > CPUIDLE_STATE_MAX) {
+ pr_err("%s: state_count exceeds maximum\n", __func__);
+ return -EINVAL;
+ }
+
+ ret = cpuidle_register_driver(drv);
+ if (ret) {
+ pr_err("%s: Failed to register cpuidle driver with error: %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ imx_cpuidle_devices = alloc_percpu(struct cpuidle_device);
+ if (imx_cpuidle_devices == NULL) {
+ ret = -ENOMEM;
+ goto unregister_drv;
+ }
+
+ /* initialize state data for each cpuidle_device */
+ for_each_possible_cpu(cpu_id) {
+ dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id);
+ dev->cpu = cpu_id;
+ dev->state_count = drv->state_count;
+
+ ret = cpuidle_register_device(dev);
+ if (ret) {
+ pr_err("%s: Failed to register cpu %u, error: %d\n",
+ __func__, cpu_id, ret);
+ goto uninit;
+ }
+ }
+
+ return 0;
+
+uninit:
+ imx_cpuidle_devices_uninit();
+
+unregister_drv:
+ cpuidle_unregister_driver(drv);
+ return ret;
+}
diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
new file mode 100644
index 0000000..88726f4
--- /dev/null
+++ b/arch/arm/mach-imx/epit.c
@@ -0,0 +1,234 @@
+/*
+ * linux/arch/arm/plat-mxc/epit.c
+ *
+ * Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#define EPITCR 0x00
+#define EPITSR 0x04
+#define EPITLR 0x08
+#define EPITCMPR 0x0c
+#define EPITCNR 0x10
+
+#define EPITCR_EN (1 << 0)
+#define EPITCR_ENMOD (1 << 1)
+#define EPITCR_OCIEN (1 << 2)
+#define EPITCR_RLD (1 << 3)
+#define EPITCR_PRESC(x) (((x) & 0xfff) << 4)
+#define EPITCR_SWR (1 << 16)
+#define EPITCR_IOVW (1 << 17)
+#define EPITCR_DBGEN (1 << 18)
+#define EPITCR_WAITEN (1 << 19)
+#define EPITCR_RES (1 << 20)
+#define EPITCR_STOPEN (1 << 21)
+#define EPITCR_OM_DISCON (0 << 22)
+#define EPITCR_OM_TOGGLE (1 << 22)
+#define EPITCR_OM_CLEAR (2 << 22)
+#define EPITCR_OM_SET (3 << 22)
+#define EPITCR_CLKSRC_OFF (0 << 24)
+#define EPITCR_CLKSRC_PERIPHERAL (1 << 24)
+#define EPITCR_CLKSRC_REF_HIGH (1 << 24)
+#define EPITCR_CLKSRC_REF_LOW (3 << 24)
+
+#define EPITSR_OCIF (1 << 0)
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+
+static struct clock_event_device clockevent_epit;
+static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
+
+static void __iomem *timer_base;
+
+static inline void epit_irq_disable(void)
+{
+ u32 val;
+
+ val = __raw_readl(timer_base + EPITCR);
+ val &= ~EPITCR_OCIEN;
+ __raw_writel(val, timer_base + EPITCR);
+}
+
+static inline void epit_irq_enable(void)
+{
+ u32 val;
+
+ val = __raw_readl(timer_base + EPITCR);
+ val |= EPITCR_OCIEN;
+ __raw_writel(val, timer_base + EPITCR);
+}
+
+static void epit_irq_acknowledge(void)
+{
+ __raw_writel(EPITSR_OCIF, timer_base + EPITSR);
+}
+
+static int __init epit_clocksource_init(struct clk *timer_clk)
+{
+ unsigned int c = clk_get_rate(timer_clk);
+
+ return clocksource_mmio_init(timer_base + EPITCNR, "epit", c, 200, 32,
+ clocksource_mmio_readl_down);
+}
+
+/* clock event */
+
+static int epit_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long tcmp;
+
+ tcmp = __raw_readl(timer_base + EPITCNR);
+
+ __raw_writel(tcmp - evt, timer_base + EPITCMPR);
+
+ return 0;
+}
+
+static void epit_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned long flags;
+
+ /*
+ * The timer interrupt generation is disabled at least
+ * for enough time to call epit_set_next_event()
+ */
+ local_irq_save(flags);
+
+ /* Disable interrupt in GPT module */
+ epit_irq_disable();
+
+ if (mode != clockevent_mode) {
+ /* Set event time into far-far future */
+
+ /* Clear pending interrupt */
+ epit_irq_acknowledge();
+ }
+
+ /* Remember timer mode */
+ clockevent_mode = mode;
+ local_irq_restore(flags);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ printk(KERN_ERR "epit_set_mode: Periodic mode is not "
+ "supported for i.MX EPIT\n");
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /*
+ * Do not put overhead of interrupt enable/disable into
+ * epit_set_next_event(), the core has about 4 minutes
+ * to call epit_set_next_event() or shutdown clock after
+ * mode switching
+ */
+ local_irq_save(flags);
+ epit_irq_enable();
+ local_irq_restore(flags);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_RESUME:
+ /* Left event sources disabled, no more interrupts appear */
+ break;
+ }
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &clockevent_epit;
+
+ epit_irq_acknowledge();
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction epit_timer_irq = {
+ .name = "i.MX EPIT Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = epit_timer_interrupt,
+};
+
+static struct clock_event_device clockevent_epit = {
+ .name = "epit",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_mode = epit_set_mode,
+ .set_next_event = epit_set_next_event,
+ .rating = 200,
+};
+
+static int __init epit_clockevent_init(struct clk *timer_clk)
+{
+ unsigned int c = clk_get_rate(timer_clk);
+
+ clockevent_epit.mult = div_sc(c, NSEC_PER_SEC,
+ clockevent_epit.shift);
+ clockevent_epit.max_delta_ns =
+ clockevent_delta2ns(0xfffffffe, &clockevent_epit);
+ clockevent_epit.min_delta_ns =
+ clockevent_delta2ns(0x800, &clockevent_epit);
+
+ clockevent_epit.cpumask = cpumask_of(0);
+
+ clockevents_register_device(&clockevent_epit);
+
+ return 0;
+}
+
+void __init epit_timer_init(void __iomem *base, int irq)
+{
+ struct clk *timer_clk;
+
+ timer_clk = clk_get_sys("imx-epit.0", NULL);
+ if (IS_ERR(timer_clk)) {
+ pr_err("i.MX epit: unable to get clk\n");
+ return;
+ }
+
+ clk_prepare_enable(timer_clk);
+
+ timer_base = base;
+
+ /*
+ * Initialise to a known state (all timers off, and timing reset)
+ */
+ __raw_writel(0x0, timer_base + EPITCR);
+
+ __raw_writel(0xffffffff, timer_base + EPITLR);
+ __raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
+ timer_base + EPITCR);
+
+ /* init and register the timer to the framework */
+ epit_clocksource_init(timer_clk);
+ epit_clockevent_init(timer_clk);
+
+ /* Make irqs happen */
+ setup_irq(irq, &epit_timer_irq);
+}
diff --git a/arch/arm/mach-imx/include/mach/common.h b/arch/arm/mach-imx/include/mach/common.h
new file mode 100644
index 0000000..ead9018
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/common.h
@@ -0,0 +1,162 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_COMMON_H__
+#define __ASM_ARCH_MXC_COMMON_H__
+
+struct platform_device;
+struct clk;
+enum mxc_cpu_pwr_mode;
+
+extern void mx1_map_io(void);
+extern void mx21_map_io(void);
+extern void mx25_map_io(void);
+extern void mx27_map_io(void);
+extern void mx31_map_io(void);
+extern void mx35_map_io(void);
+extern void mx50_map_io(void);
+extern void mx51_map_io(void);
+extern void mx53_map_io(void);
+extern void imx1_init_early(void);
+extern void imx21_init_early(void);
+extern void imx25_init_early(void);
+extern void imx27_init_early(void);
+extern void imx31_init_early(void);
+extern void imx35_init_early(void);
+extern void imx50_init_early(void);
+extern void imx51_init_early(void);
+extern void imx53_init_early(void);
+extern void mxc_init_irq(void __iomem *);
+extern void tzic_init_irq(void __iomem *);
+extern void mx1_init_irq(void);
+extern void mx21_init_irq(void);
+extern void mx25_init_irq(void);
+extern void mx27_init_irq(void);
+extern void mx31_init_irq(void);
+extern void mx35_init_irq(void);
+extern void mx50_init_irq(void);
+extern void mx51_init_irq(void);
+extern void mx53_init_irq(void);
+extern void imx1_soc_init(void);
+extern void imx21_soc_init(void);
+extern void imx25_soc_init(void);
+extern void imx27_soc_init(void);
+extern void imx31_soc_init(void);
+extern void imx35_soc_init(void);
+extern void imx50_soc_init(void);
+extern void imx51_soc_init(void);
+extern void imx51_init_late(void);
+extern void imx53_init_late(void);
+extern void epit_timer_init(void __iomem *base, int irq);
+extern void mxc_timer_init(void __iomem *, int);
+extern int mx1_clocks_init(unsigned long fref);
+extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
+extern int mx25_clocks_init(void);
+extern int mx27_clocks_init(unsigned long fref);
+extern int mx31_clocks_init(unsigned long fref);
+extern int mx35_clocks_init(void);
+extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
+ unsigned long ckih1, unsigned long ckih2);
+extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
+ unsigned long ckih1, unsigned long ckih2);
+extern int mx27_clocks_init_dt(void);
+extern int mx31_clocks_init_dt(void);
+extern int mx51_clocks_init_dt(void);
+extern int mx53_clocks_init_dt(void);
+extern int mx6q_clocks_init(void);
+extern struct platform_device *mxc_register_gpio(char *name, int id,
+ resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
+extern void mxc_set_cpu_type(unsigned int type);
+extern void mxc_restart(char, const char *);
+extern void mxc_arch_reset_init(void __iomem *);
+extern int mx53_revision(void);
+extern int mx53_display_revision(void);
+extern void imx_set_aips(void __iomem *);
+
+enum mxc_cpu_pwr_mode {
+ WAIT_CLOCKED, /* wfi only */
+ WAIT_UNCLOCKED, /* WAIT */
+ WAIT_UNCLOCKED_POWER_OFF, /* WAIT + SRPG */
+ STOP_POWER_ON, /* just STOP */
+ STOP_POWER_OFF, /* STOP + SRPG */
+};
+
+enum mx3_cpu_pwr_mode {
+ MX3_RUN,
+ MX3_WAIT,
+ MX3_DOZE,
+ MX3_SLEEP,
+};
+
+extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
+extern void imx_print_silicon_rev(const char *cpu, int srev);
+
+void avic_handle_irq(struct pt_regs *);
+void tzic_handle_irq(struct pt_regs *);
+
+#define imx1_handle_irq avic_handle_irq
+#define imx21_handle_irq avic_handle_irq
+#define imx25_handle_irq avic_handle_irq
+#define imx27_handle_irq avic_handle_irq
+#define imx31_handle_irq avic_handle_irq
+#define imx35_handle_irq avic_handle_irq
+#define imx50_handle_irq tzic_handle_irq
+#define imx51_handle_irq tzic_handle_irq
+#define imx53_handle_irq tzic_handle_irq
+#define imx6q_handle_irq gic_handle_irq
+
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+#ifdef CONFIG_DEBUG_LL
+extern void imx_lluart_map_io(void);
+#else
+static inline void imx_lluart_map_io(void) {}
+#endif
+extern void v7_cpu_resume(void);
+extern u32 *pl310_get_save_ptr(void);
+#ifdef CONFIG_SMP
+extern void v7_secondary_startup(void);
+extern void imx_scu_map_io(void);
+extern void imx_smp_prepare(void);
+#else
+static inline void imx_scu_map_io(void) {}
+static inline void imx_smp_prepare(void) {}
+#endif
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern void imx_src_init(void);
+extern void imx_src_prepare_restart(void);
+extern void imx_gpc_init(void);
+extern void imx_gpc_pre_suspend(void);
+extern void imx_gpc_post_resume(void);
+extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+extern void imx6q_clock_map_io(void);
+
+extern void imx_cpu_die(unsigned int cpu);
+
+#ifdef CONFIG_PM
+extern void imx6q_pm_init(void);
+extern void imx51_pm_init(void);
+extern void imx53_pm_init(void);
+#else
+static inline void imx6q_pm_init(void) {}
+static inline void imx51_pm_init(void) {}
+static inline void imx53_pm_init(void) {}
+#endif
+
+#ifdef CONFIG_NEON
+extern int mx51_neon_fixup(void);
+#else
+static inline int mx51_neon_fixup(void) { return 0; }
+#endif
+
+extern struct smp_operations imx_smp_ops;
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/cpuidle.h b/arch/arm/mach-imx/include/mach/cpuidle.h
new file mode 100644
index 0000000..bc932d1
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/cpuidle.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/cpuidle.h>
+
+#ifdef CONFIG_CPU_IDLE
+extern int imx_cpuidle_init(struct cpuidle_driver *drv);
+#else
+static inline int imx_cpuidle_init(struct cpuidle_driver *drv)
+{
+ return -ENODEV;
+}
+#endif
diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
new file mode 100644
index 0000000..761e45f
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/debug-macro.S
@@ -0,0 +1,51 @@
+/* arch/arm/mach-imx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <mach/hardware.h>
+
+#ifdef CONFIG_DEBUG_IMX1_UART
+#define UART_PADDR MX1_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX25_UART)
+#define UART_PADDR MX25_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
+#define UART_PADDR MX2x_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
+#define UART_PADDR MX3x_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX51_UART)
+#define UART_PADDR MX51_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
+#define UART_PADDR MX53_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX6Q_UART2)
+#define UART_PADDR MX6Q_UART2_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX6Q_UART4)
+#define UART_PADDR MX6Q_UART4_BASE_ADDR
+#endif
+
+#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR)
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =UART_PADDR @ physical
+ ldr \rv, =UART_VADDR @ virtual
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x40] @ TXDATA
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #0x98] @ SR2
+ tst \rd, #1 << 3 @ TXDC
+ beq 1002b @ wait until transmit done
+ .endm
diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
new file mode 100644
index 0000000..ebf1065
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/hardware.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#define __ASM_ARCH_MXC_HARDWARE_H__
+
+#include <asm/sizes.h>
+
+#define addr_in_module(addr, mod) \
+ ((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE)
+
+#define IMX_IO_P2V_MODULE(addr, module) \
+ (((addr) - module ## _BASE_ADDR) < module ## _SIZE ? \
+ (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0)
+
+/*
+ * This is rather complicated for humans and ugly to verify, but for a machine
+ * it's OK. Still more as it is usually only applied to constants. The upsides
+ * on using this approach are:
+ *
+ * - same mapping on all i.MX machines
+ * - works for assembler, too
+ * - no need to nurture #defines for virtual addresses
+ *
+ * The downside it, it's hard to verify (but I have a script for that).
+ *
+ * Obviously this needs to be injective for each SoC. In general it maps the
+ * whole address space to [0xf4000000, 0xf5ffffff]. So [0xf6000000,0xfeffffff]
+ * is free for per-machine use (e.g. KZM_ARM11_01 uses 64MiB there).
+ *
+ * It applies the following mappings for the different SoCs:
+ *
+ * mx1:
+ * IO 0x00200000+0x100000 -> 0xf4000000+0x100000
+ * mx21:
+ * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000
+ * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000
+ * X_MEMC 0xdf000000+0x004000 -> 0xf5f00000+0x004000
+ * mx25:
+ * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
+ * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
+ * mx27:
+ * AIPI 0x10000000+0x100000 -> 0xf4400000+0x100000
+ * SAHB1 0x80000000+0x100000 -> 0xf5000000+0x100000
+ * X_MEMC 0xd8000000+0x100000 -> 0xf5c00000+0x100000
+ * mx31:
+ * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
+ * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
+ * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
+ * mx35:
+ * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
+ * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * AVIC 0x68000000+0x100000 -> 0xf5800000+0x100000
+ * X_MEMC 0xb8000000+0x010000 -> 0xf5c00000+0x010000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
+ * mx50:
+ * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
+ * AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
+ * AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
+ * mx51:
+ * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
+ * IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000
+ * DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000
+ * SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000
+ * AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000
+ * AIPS2 0x83f00000+0x100000 -> 0xf5300000+0x100000
+ * mx53:
+ * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
+ * DEBUG 0x40000000+0x100000 -> 0xf5000000+0x100000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
+ * AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
+ * mx6q:
+ * SCU 0x00a00000+0x004000 -> 0xf4000000+0x004000
+ * CCM 0x020c4000+0x004000 -> 0xf42c4000+0x004000
+ * ANATOP 0x020c8000+0x004000 -> 0xf42c8000+0x004000
+ * UART4 0x021f0000+0x004000 -> 0xf42f0000+0x004000
+ */
+#define IMX_IO_P2V(x) ( \
+ (((x) & 0x80000000) >> 7) | \
+ (0xf4000000 + \
+ (((x) & 0x50000000) >> 6) + \
+ (((x) & 0x0b000000) >> 4) + \
+ (((x) & 0x000fffff))))
+
+#define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x))
+
+#include <mach/mxc.h>
+
+#include <mach/mx6q.h>
+#include <mach/mx50.h>
+#include <mach/mx51.h>
+#include <mach/mx53.h>
+#include <mach/mx3x.h>
+#include <mach/mx31.h>
+#include <mach/mx35.h>
+#include <mach/mx2x.h>
+#include <mach/mx21.h>
+#include <mach/mx27.h>
+#include <mach/mx1.h>
+#include <mach/mx25.h>
+
+#define imx_map_entry(soc, name, _type) { \
+ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \
+ .pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR), \
+ .length = soc ## _ ## name ## _SIZE, \
+ .type = _type, \
+}
+
+/* There's a off-by-one betweem the gpio bank number and the gpiochip */
+/* range e.g. GPIO_1_5 is gpio 5 under linux */
+#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr))
+
+#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/mach-imx/include/mach/iim.h b/arch/arm/mach-imx/include/mach/iim.h
new file mode 100644
index 0000000..315bffa
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/iim.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_IIM_H__
+#define __ASM_ARCH_MXC_IIM_H__
+
+/* Register offsets */
+#define MXC_IIMSTAT 0x0000
+#define MXC_IIMSTATM 0x0004
+#define MXC_IIMERR 0x0008
+#define MXC_IIMEMASK 0x000C
+#define MXC_IIMFCTL 0x0010
+#define MXC_IIMUA 0x0014
+#define MXC_IIMLA 0x0018
+#define MXC_IIMSDAT 0x001C
+#define MXC_IIMPREV 0x0020
+#define MXC_IIMSREV 0x0024
+#define MXC_IIMPRG_P 0x0028
+#define MXC_IIMSCS0 0x002C
+#define MXC_IIMSCS1 0x0030
+#define MXC_IIMSCS2 0x0034
+#define MXC_IIMSCS3 0x0038
+#define MXC_IIMFBAC0 0x0800
+#define MXC_IIMJAC 0x0804
+#define MXC_IIMHWV1 0x0808
+#define MXC_IIMHWV2 0x080C
+#define MXC_IIMHAB0 0x0810
+#define MXC_IIMHAB1 0x0814
+/* Definitions for i.MX27 TO2 */
+#define MXC_IIMMAC 0x0814
+#define MXC_IIMPREV_FUSE 0x0818
+#define MXC_IIMSREV_FUSE 0x081C
+#define MXC_IIMSJC_CHALL_0 0x0820
+#define MXC_IIMSJC_CHALL_7 0x083C
+#define MXC_IIMFB0UC17 0x0840
+#define MXC_IIMFB0UC255 0x0BFC
+#define MXC_IIMFBAC1 0x0C00
+/* Definitions for i.MX27 TO2 */
+#define MXC_IIMSUID 0x0C04
+#define MXC_IIMKEY0 0x0C04
+#define MXC_IIMKEY20 0x0C54
+#define MXC_IIMSJC_RESP_0 0x0C58
+#define MXC_IIMSJC_RESP_7 0x0C74
+#define MXC_IIMFB1UC30 0x0C78
+#define MXC_IIMFB1UC255 0x0FFC
+
+/* Bit definitions */
+
+#define MXC_IIMHWV1_WLOCK (0x1 << 7)
+#define MXC_IIMHWV1_MCU_ENDIAN (0x1 << 6)
+#define MXC_IIMHWV1_DSP_ENDIAN (0x1 << 5)
+#define MXC_IIMHWV1_BOOT_INT (0x1 << 4)
+#define MXC_IIMHWV1_SCC_DISABLE (0x1 << 3)
+#define MXC_IIMHWV1_HANTRO_DISABLE (0x1 << 2)
+#define MXC_IIMHWV1_MEMSTICK_DIS (0x1 << 1)
+
+#define MXC_IIMHWV2_WLOCK (0x1 << 7)
+#define MXC_IIMHWV2_BP_SDMA (0x1 << 6)
+#define MXC_IIMHWV2_SCM_DCM (0x1 << 5)
+
+#endif /* __ASM_ARCH_MXC_IIM_H__ */
diff --git a/arch/arm/mach-imx/include/mach/ipu.h b/arch/arm/mach-imx/include/mach/ipu.h
new file mode 100644
index 0000000..539e559
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/ipu.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IPU_H_
+#define _IPU_H_
+
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+
+/* IPU DMA Controller channel definitions. */
+enum ipu_channel {
+ IDMAC_IC_0 = 0, /* IC (encoding task) to memory */
+ IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */
+ IDMAC_ADC_0 = 1,
+ IDMAC_IC_2 = 2,
+ IDMAC_ADC_1 = 2,
+ IDMAC_IC_3 = 3,
+ IDMAC_IC_4 = 4,
+ IDMAC_IC_5 = 5,
+ IDMAC_IC_6 = 6,
+ IDMAC_IC_7 = 7, /* IC (sensor data) to memory */
+ IDMAC_IC_8 = 8,
+ IDMAC_IC_9 = 9,
+ IDMAC_IC_10 = 10,
+ IDMAC_IC_11 = 11,
+ IDMAC_IC_12 = 12,
+ IDMAC_IC_13 = 13,
+ IDMAC_SDC_0 = 14, /* Background synchronous display data */
+ IDMAC_SDC_1 = 15, /* Foreground data (overlay) */
+ IDMAC_SDC_2 = 16,
+ IDMAC_SDC_3 = 17,
+ IDMAC_ADC_2 = 18,
+ IDMAC_ADC_3 = 19,
+ IDMAC_ADC_4 = 20,
+ IDMAC_ADC_5 = 21,
+ IDMAC_ADC_6 = 22,
+ IDMAC_ADC_7 = 23,
+ IDMAC_PF_0 = 24,
+ IDMAC_PF_1 = 25,
+ IDMAC_PF_2 = 26,
+ IDMAC_PF_3 = 27,
+ IDMAC_PF_4 = 28,
+ IDMAC_PF_5 = 29,
+ IDMAC_PF_6 = 30,
+ IDMAC_PF_7 = 31,
+};
+
+/* Order significant! */
+enum ipu_channel_status {
+ IPU_CHANNEL_FREE,
+ IPU_CHANNEL_INITIALIZED,
+ IPU_CHANNEL_READY,
+ IPU_CHANNEL_ENABLED,
+};
+
+#define IPU_CHANNELS_NUM 32
+
+enum pixel_fmt {
+ /* 1 byte */
+ IPU_PIX_FMT_GENERIC,
+ IPU_PIX_FMT_RGB332,
+ IPU_PIX_FMT_YUV420P,
+ IPU_PIX_FMT_YUV422P,
+ IPU_PIX_FMT_YUV420P2,
+ IPU_PIX_FMT_YVU422P,
+ /* 2 bytes */
+ IPU_PIX_FMT_RGB565,
+ IPU_PIX_FMT_RGB666,
+ IPU_PIX_FMT_BGR666,
+ IPU_PIX_FMT_YUYV,
+ IPU_PIX_FMT_UYVY,
+ /* 3 bytes */
+ IPU_PIX_FMT_RGB24,
+ IPU_PIX_FMT_BGR24,
+ /* 4 bytes */
+ IPU_PIX_FMT_GENERIC_32,
+ IPU_PIX_FMT_RGB32,
+ IPU_PIX_FMT_BGR32,
+ IPU_PIX_FMT_ABGR32,
+ IPU_PIX_FMT_BGRA32,
+ IPU_PIX_FMT_RGBA32,
+};
+
+enum ipu_color_space {
+ IPU_COLORSPACE_RGB,
+ IPU_COLORSPACE_YCBCR,
+ IPU_COLORSPACE_YUV
+};
+
+/*
+ * Enumeration of IPU rotation modes
+ */
+enum ipu_rotate_mode {
+ /* Note the enum values correspond to BAM value */
+ IPU_ROTATE_NONE = 0,
+ IPU_ROTATE_VERT_FLIP = 1,
+ IPU_ROTATE_HORIZ_FLIP = 2,
+ IPU_ROTATE_180 = 3,
+ IPU_ROTATE_90_RIGHT = 4,
+ IPU_ROTATE_90_RIGHT_VFLIP = 5,
+ IPU_ROTATE_90_RIGHT_HFLIP = 6,
+ IPU_ROTATE_90_LEFT = 7,
+};
+
+/*
+ * Enumeration of DI ports for ADC.
+ */
+enum display_port {
+ DISP0,
+ DISP1,
+ DISP2,
+ DISP3
+};
+
+struct idmac_video_param {
+ unsigned short in_width;
+ unsigned short in_height;
+ uint32_t in_pixel_fmt;
+ unsigned short out_width;
+ unsigned short out_height;
+ uint32_t out_pixel_fmt;
+ unsigned short out_stride;
+ bool graphics_combine_en;
+ bool global_alpha_en;
+ bool key_color_en;
+ enum display_port disp;
+ unsigned short out_left;
+ unsigned short out_top;
+};
+
+/*
+ * Union of initialization parameters for a logical channel. So far only video
+ * parameters are used.
+ */
+union ipu_channel_param {
+ struct idmac_video_param video;
+};
+
+struct idmac_tx_desc {
+ struct dma_async_tx_descriptor txd;
+ struct scatterlist *sg; /* scatterlist for this */
+ unsigned int sg_len; /* tx-descriptor. */
+ struct list_head list;
+};
+
+struct idmac_channel {
+ struct dma_chan dma_chan;
+ dma_cookie_t completed; /* last completed cookie */
+ union ipu_channel_param params;
+ enum ipu_channel link; /* input channel, linked to the output */
+ enum ipu_channel_status status;
+ void *client; /* Only one client per channel */
+ unsigned int n_tx_desc;
+ struct idmac_tx_desc *desc; /* allocated tx-descriptors */
+ struct scatterlist *sg[2]; /* scatterlist elements in buffer-0 and -1 */
+ struct list_head free_list; /* free tx-descriptors */
+ struct list_head queue; /* queued tx-descriptors */
+ spinlock_t lock; /* protects sg[0,1], queue */
+ struct mutex chan_mutex; /* protects status, cookie, free_list */
+ bool sec_chan_en;
+ int active_buffer;
+ unsigned int eof_irq;
+ char eof_name[16]; /* EOF IRQ name for request_irq() */
+};
+
+#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd)
+#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan)
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/iram.h b/arch/arm/mach-imx/include/mach/iram.h
new file mode 100644
index 0000000..022690c
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/iram.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/errno.h>
+
+#ifdef CONFIG_IRAM_ALLOC
+
+int __init iram_init(unsigned long base, unsigned long size);
+void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr);
+void iram_free(unsigned long dma_addr, unsigned int size);
+
+#else
+
+static inline int __init iram_init(unsigned long base, unsigned long size)
+{
+ return -ENOMEM;
+}
+
+static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
+{
+ return NULL;
+}
+
+static inline void iram_free(unsigned long base, unsigned long size) {}
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
new file mode 100644
index 0000000..d73f5e8
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/irqs.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_IRQS_H__
+#define __ASM_ARCH_MXC_IRQS_H__
+
+extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
+
+/* all normal IRQs can be FIQs */
+#define FIQ_START 0
+/* switch between IRQ and FIQ */
+extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
+
+#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/mach-imx/include/mach/mx1.h b/arch/arm/mach-imx/include/mach/mx1.h
new file mode 100644
index 0000000..45bd31c
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx1.h
@@ -0,0 +1,172 @@
+/*
+ * Copyright (C) 1997,1998 Russell King
+ * Copyright (C) 1999 ARM Limited
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MX1_H__
+#define __MACH_MX1_H__
+
+/*
+ * Memory map
+ */
+#define MX1_IO_BASE_ADDR 0x00200000
+#define MX1_IO_SIZE SZ_1M
+
+#define MX1_CS0_PHYS 0x10000000
+#define MX1_CS0_SIZE 0x02000000
+
+#define MX1_CS1_PHYS 0x12000000
+#define MX1_CS1_SIZE 0x01000000
+
+#define MX1_CS2_PHYS 0x13000000
+#define MX1_CS2_SIZE 0x01000000
+
+#define MX1_CS3_PHYS 0x14000000
+#define MX1_CS3_SIZE 0x01000000
+
+#define MX1_CS4_PHYS 0x15000000
+#define MX1_CS4_SIZE 0x01000000
+
+#define MX1_CS5_PHYS 0x16000000
+#define MX1_CS5_SIZE 0x01000000
+
+/*
+ * Register BASEs, based on OFFSETs
+ */
+#define MX1_AIPI1_BASE_ADDR (0x00000 + MX1_IO_BASE_ADDR)
+#define MX1_WDT_BASE_ADDR (0x01000 + MX1_IO_BASE_ADDR)
+#define MX1_TIM1_BASE_ADDR (0x02000 + MX1_IO_BASE_ADDR)
+#define MX1_TIM2_BASE_ADDR (0x03000 + MX1_IO_BASE_ADDR)
+#define MX1_RTC_BASE_ADDR (0x04000 + MX1_IO_BASE_ADDR)
+#define MX1_LCDC_BASE_ADDR (0x05000 + MX1_IO_BASE_ADDR)
+#define MX1_UART1_BASE_ADDR (0x06000 + MX1_IO_BASE_ADDR)
+#define MX1_UART2_BASE_ADDR (0x07000 + MX1_IO_BASE_ADDR)
+#define MX1_PWM_BASE_ADDR (0x08000 + MX1_IO_BASE_ADDR)
+#define MX1_DMA_BASE_ADDR (0x09000 + MX1_IO_BASE_ADDR)
+#define MX1_AIPI2_BASE_ADDR (0x10000 + MX1_IO_BASE_ADDR)
+#define MX1_SIM_BASE_ADDR (0x11000 + MX1_IO_BASE_ADDR)
+#define MX1_USBD_BASE_ADDR (0x12000 + MX1_IO_BASE_ADDR)
+#define MX1_CSPI1_BASE_ADDR (0x13000 + MX1_IO_BASE_ADDR)
+#define MX1_MMC_BASE_ADDR (0x14000 + MX1_IO_BASE_ADDR)
+#define MX1_ASP_BASE_ADDR (0x15000 + MX1_IO_BASE_ADDR)
+#define MX1_BTA_BASE_ADDR (0x16000 + MX1_IO_BASE_ADDR)
+#define MX1_I2C_BASE_ADDR (0x17000 + MX1_IO_BASE_ADDR)
+#define MX1_SSI_BASE_ADDR (0x18000 + MX1_IO_BASE_ADDR)
+#define MX1_CSPI2_BASE_ADDR (0x19000 + MX1_IO_BASE_ADDR)
+#define MX1_MSHC_BASE_ADDR (0x1A000 + MX1_IO_BASE_ADDR)
+#define MX1_CCM_BASE_ADDR (0x1B000 + MX1_IO_BASE_ADDR)
+#define MX1_SCM_BASE_ADDR (0x1B804 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO1_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO2_BASE_ADDR (0x1C100 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO3_BASE_ADDR (0x1C200 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO4_BASE_ADDR (0x1C300 + MX1_IO_BASE_ADDR)
+#define MX1_EIM_BASE_ADDR (0x20000 + MX1_IO_BASE_ADDR)
+#define MX1_SDRAMC_BASE_ADDR (0x21000 + MX1_IO_BASE_ADDR)
+#define MX1_MMA_BASE_ADDR (0x22000 + MX1_IO_BASE_ADDR)
+#define MX1_AVIC_BASE_ADDR (0x23000 + MX1_IO_BASE_ADDR)
+#define MX1_CSI_BASE_ADDR (0x24000 + MX1_IO_BASE_ADDR)
+
+/* macro to get at IO space when running virtually */
+#define MX1_IO_P2V(x) IMX_IO_P2V(x)
+#define MX1_IO_ADDRESS(x) IOMEM(MX1_IO_P2V(x))
+
+/* fixed interrput numbers */
+#include <asm/irq.h>
+#define MX1_INT_SOFTINT (NR_IRQS_LEGACY + 0)
+#define MX1_INT_CSI (NR_IRQS_LEGACY + 6)
+#define MX1_DSPA_MAC_INT (NR_IRQS_LEGACY + 7)
+#define MX1_DSPA_INT (NR_IRQS_LEGACY + 8)
+#define MX1_COMP_INT (NR_IRQS_LEGACY + 9)
+#define MX1_MSHC_XINT (NR_IRQS_LEGACY + 10)
+#define MX1_GPIO_INT_PORTA (NR_IRQS_LEGACY + 11)
+#define MX1_GPIO_INT_PORTB (NR_IRQS_LEGACY + 12)
+#define MX1_GPIO_INT_PORTC (NR_IRQS_LEGACY + 13)
+#define MX1_INT_LCDC (NR_IRQS_LEGACY + 14)
+#define MX1_SIM_INT (NR_IRQS_LEGACY + 15)
+#define MX1_SIM_DATA_INT (NR_IRQS_LEGACY + 16)
+#define MX1_RTC_INT (NR_IRQS_LEGACY + 17)
+#define MX1_RTC_SAMINT (NR_IRQS_LEGACY + 18)
+#define MX1_INT_UART2PFERR (NR_IRQS_LEGACY + 19)
+#define MX1_INT_UART2RTS (NR_IRQS_LEGACY + 20)
+#define MX1_INT_UART2DTR (NR_IRQS_LEGACY + 21)
+#define MX1_INT_UART2UARTC (NR_IRQS_LEGACY + 22)
+#define MX1_INT_UART2TX (NR_IRQS_LEGACY + 23)
+#define MX1_INT_UART2RX (NR_IRQS_LEGACY + 24)
+#define MX1_INT_UART1PFERR (NR_IRQS_LEGACY + 25)
+#define MX1_INT_UART1RTS (NR_IRQS_LEGACY + 26)
+#define MX1_INT_UART1DTR (NR_IRQS_LEGACY + 27)
+#define MX1_INT_UART1UARTC (NR_IRQS_LEGACY + 28)
+#define MX1_INT_UART1TX (NR_IRQS_LEGACY + 29)
+#define MX1_INT_UART1RX (NR_IRQS_LEGACY + 30)
+#define MX1_VOICE_DAC_INT (NR_IRQS_LEGACY + 31)
+#define MX1_VOICE_ADC_INT (NR_IRQS_LEGACY + 32)
+#define MX1_PEN_DATA_INT (NR_IRQS_LEGACY + 33)
+#define MX1_PWM_INT (NR_IRQS_LEGACY + 34)
+#define MX1_SDHC_INT (NR_IRQS_LEGACY + 35)
+#define MX1_INT_I2C (NR_IRQS_LEGACY + 39)
+#define MX1_INT_CSPI2 (NR_IRQS_LEGACY + 40)
+#define MX1_INT_CSPI1 (NR_IRQS_LEGACY + 41)
+#define MX1_SSI_TX_INT (NR_IRQS_LEGACY + 42)
+#define MX1_SSI_TX_ERR_INT (NR_IRQS_LEGACY + 43)
+#define MX1_SSI_RX_INT (NR_IRQS_LEGACY + 44)
+#define MX1_SSI_RX_ERR_INT (NR_IRQS_LEGACY + 45)
+#define MX1_TOUCH_INT (NR_IRQS_LEGACY + 46)
+#define MX1_INT_USBD0 (NR_IRQS_LEGACY + 47)
+#define MX1_INT_USBD1 (NR_IRQS_LEGACY + 48)
+#define MX1_INT_USBD2 (NR_IRQS_LEGACY + 49)
+#define MX1_INT_USBD3 (NR_IRQS_LEGACY + 50)
+#define MX1_INT_USBD4 (NR_IRQS_LEGACY + 51)
+#define MX1_INT_USBD5 (NR_IRQS_LEGACY + 52)
+#define MX1_INT_USBD6 (NR_IRQS_LEGACY + 53)
+#define MX1_BTSYS_INT (NR_IRQS_LEGACY + 55)
+#define MX1_BTTIM_INT (NR_IRQS_LEGACY + 56)
+#define MX1_BTWUI_INT (NR_IRQS_LEGACY + 57)
+#define MX1_TIM2_INT (NR_IRQS_LEGACY + 58)
+#define MX1_TIM1_INT (NR_IRQS_LEGACY + 59)
+#define MX1_DMA_ERR (NR_IRQS_LEGACY + 60)
+#define MX1_DMA_INT (NR_IRQS_LEGACY + 61)
+#define MX1_GPIO_INT_PORTD (NR_IRQS_LEGACY + 62)
+#define MX1_WDT_INT (NR_IRQS_LEGACY + 63)
+
+/* DMA */
+#define MX1_DMA_REQ_UART3_T 2
+#define MX1_DMA_REQ_UART3_R 3
+#define MX1_DMA_REQ_SSI2_T 4
+#define MX1_DMA_REQ_SSI2_R 5
+#define MX1_DMA_REQ_CSI_STAT 6
+#define MX1_DMA_REQ_CSI_R 7
+#define MX1_DMA_REQ_MSHC 8
+#define MX1_DMA_REQ_DSPA_DCT_DOUT 9
+#define MX1_DMA_REQ_DSPA_DCT_DIN 10
+#define MX1_DMA_REQ_DSPA_MAC 11
+#define MX1_DMA_REQ_EXT 12
+#define MX1_DMA_REQ_SDHC 13
+#define MX1_DMA_REQ_SPI1_R 14
+#define MX1_DMA_REQ_SPI1_T 15
+#define MX1_DMA_REQ_SSI_T 16
+#define MX1_DMA_REQ_SSI_R 17
+#define MX1_DMA_REQ_ASP_DAC 18
+#define MX1_DMA_REQ_ASP_ADC 19
+#define MX1_DMA_REQ_USP_EP(x) (20 + (x))
+#define MX1_DMA_REQ_SPI2_R 26
+#define MX1_DMA_REQ_SPI2_T 27
+#define MX1_DMA_REQ_UART2_T 28
+#define MX1_DMA_REQ_UART2_R 29
+#define MX1_DMA_REQ_UART1_T 30
+#define MX1_DMA_REQ_UART1_R 31
+
+/*
+ * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS
+ * to not break drivers/usb/gadget/imx_udc. Should go
+ * away after this driver uses the new name.
+ */
+#define USBD_INT0 MX1_INT_USBD0
+
+#endif /* ifndef __MACH_MX1_H__ */
diff --git a/arch/arm/mach-imx/include/mach/mx21.h b/arch/arm/mach-imx/include/mach/mx21.h
new file mode 100644
index 0000000..468738a
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx21.h
@@ -0,0 +1,189 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2009 Holger Schurig, hs4233@mail.mn-solutions.de
+ *
+ * This contains i.MX21-specific hardware definitions. For those
+ * hardware pieces that are common between i.MX21 and i.MX27, have a
+ * look at mx2x.h.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_MX21_H__
+#define __MACH_MX21_H__
+
+#define MX21_AIPI_BASE_ADDR 0x10000000
+#define MX21_AIPI_SIZE SZ_1M
+#define MX21_DMA_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x01000)
+#define MX21_WDOG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x02000)
+#define MX21_GPT1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x03000)
+#define MX21_GPT2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x04000)
+#define MX21_GPT3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x05000)
+#define MX21_PWM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x06000)
+#define MX21_RTC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x07000)
+#define MX21_KPP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x08000)
+#define MX21_OWIRE_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x09000)
+#define MX21_UART1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0a000)
+#define MX21_UART2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0b000)
+#define MX21_UART3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0c000)
+#define MX21_UART4_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0d000)
+#define MX21_CSPI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0e000)
+#define MX21_CSPI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0f000)
+#define MX21_SSI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x10000)
+#define MX21_SSI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x11000)
+#define MX21_I2C_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x12000)
+#define MX21_SDHC1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x13000)
+#define MX21_SDHC2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x14000)
+#define MX21_GPIO_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x15000)
+#define MX21_GPIO1_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x000)
+#define MX21_GPIO2_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x100)
+#define MX21_GPIO3_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x200)
+#define MX21_GPIO4_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x300)
+#define MX21_GPIO5_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x400)
+#define MX21_GPIO6_BASE_ADDR (MX21_GPIO_BASE_ADDR + 0x500)
+#define MX21_AUDMUX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x16000)
+#define MX21_CSPI3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x17000)
+#define MX21_LCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x21000)
+#define MX21_SLCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x22000)
+#define MX21_USBOTG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x24000)
+#define MX21_EMMA_PP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26000)
+#define MX21_EMMA_PRP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26400)
+#define MX21_CCM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27000)
+#define MX21_SYSCTRL_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27800)
+#define MX21_JAM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3e000)
+#define MX21_MAX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3f000)
+
+#define MX21_AVIC_BASE_ADDR 0x10040000
+
+#define MX21_SAHB1_BASE_ADDR 0x80000000
+#define MX21_SAHB1_SIZE SZ_1M
+#define MX21_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000)
+
+/* Memory regions and CS */
+#define MX21_SDRAM_BASE_ADDR 0xc0000000
+#define MX21_CSD1_BASE_ADDR 0xc4000000
+
+#define MX21_CS0_BASE_ADDR 0xc8000000
+#define MX21_CS1_BASE_ADDR 0xcc000000
+#define MX21_CS2_BASE_ADDR 0xd0000000
+#define MX21_CS3_BASE_ADDR 0xd1000000
+#define MX21_CS4_BASE_ADDR 0xd2000000
+#define MX21_PCMCIA_MEM_BASE_ADDR 0xd4000000
+#define MX21_CS5_BASE_ADDR 0xdd000000
+
+/* NAND, SDRAM, WEIM etc controllers */
+#define MX21_X_MEMC_BASE_ADDR 0xdf000000
+#define MX21_X_MEMC_SIZE SZ_256K
+
+#define MX21_SDRAMC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x0000)
+#define MX21_EIM_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x1000)
+#define MX21_PCMCIA_CTL_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x2000)
+#define MX21_NFC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x3000)
+
+#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */
+
+#define MX21_IO_P2V(x) IMX_IO_P2V(x)
+#define MX21_IO_ADDRESS(x) IOMEM(MX21_IO_P2V(x))
+
+/* fixed interrupt numbers */
+#include <asm/irq.h>
+#define MX21_INT_CSPI3 (NR_IRQS_LEGACY + 6)
+#define MX21_INT_GPIO (NR_IRQS_LEGACY + 8)
+#define MX21_INT_FIRI (NR_IRQS_LEGACY + 9)
+#define MX21_INT_SDHC2 (NR_IRQS_LEGACY + 10)
+#define MX21_INT_SDHC1 (NR_IRQS_LEGACY + 11)
+#define MX21_INT_I2C (NR_IRQS_LEGACY + 12)
+#define MX21_INT_SSI2 (NR_IRQS_LEGACY + 13)
+#define MX21_INT_SSI1 (NR_IRQS_LEGACY + 14)
+#define MX21_INT_CSPI2 (NR_IRQS_LEGACY + 15)
+#define MX21_INT_CSPI1 (NR_IRQS_LEGACY + 16)
+#define MX21_INT_UART4 (NR_IRQS_LEGACY + 17)
+#define MX21_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX21_INT_UART2 (NR_IRQS_LEGACY + 19)
+#define MX21_INT_UART1 (NR_IRQS_LEGACY + 20)
+#define MX21_INT_KPP (NR_IRQS_LEGACY + 21)
+#define MX21_INT_RTC (NR_IRQS_LEGACY + 22)
+#define MX21_INT_PWM (NR_IRQS_LEGACY + 23)
+#define MX21_INT_GPT3 (NR_IRQS_LEGACY + 24)
+#define MX21_INT_GPT2 (NR_IRQS_LEGACY + 25)
+#define MX21_INT_GPT1 (NR_IRQS_LEGACY + 26)
+#define MX21_INT_WDOG (NR_IRQS_LEGACY + 27)
+#define MX21_INT_PCMCIA (NR_IRQS_LEGACY + 28)
+#define MX21_INT_NFC (NR_IRQS_LEGACY + 29)
+#define MX21_INT_BMI (NR_IRQS_LEGACY + 30)
+#define MX21_INT_CSI (NR_IRQS_LEGACY + 31)
+#define MX21_INT_DMACH0 (NR_IRQS_LEGACY + 32)
+#define MX21_INT_DMACH1 (NR_IRQS_LEGACY + 33)
+#define MX21_INT_DMACH2 (NR_IRQS_LEGACY + 34)
+#define MX21_INT_DMACH3 (NR_IRQS_LEGACY + 35)
+#define MX21_INT_DMACH4 (NR_IRQS_LEGACY + 36)
+#define MX21_INT_DMACH5 (NR_IRQS_LEGACY + 37)
+#define MX21_INT_DMACH6 (NR_IRQS_LEGACY + 38)
+#define MX21_INT_DMACH7 (NR_IRQS_LEGACY + 39)
+#define MX21_INT_DMACH8 (NR_IRQS_LEGACY + 40)
+#define MX21_INT_DMACH9 (NR_IRQS_LEGACY + 41)
+#define MX21_INT_DMACH10 (NR_IRQS_LEGACY + 42)
+#define MX21_INT_DMACH11 (NR_IRQS_LEGACY + 43)
+#define MX21_INT_DMACH12 (NR_IRQS_LEGACY + 44)
+#define MX21_INT_DMACH13 (NR_IRQS_LEGACY + 45)
+#define MX21_INT_DMACH14 (NR_IRQS_LEGACY + 46)
+#define MX21_INT_DMACH15 (NR_IRQS_LEGACY + 47)
+#define MX21_INT_EMMAENC (NR_IRQS_LEGACY + 49)
+#define MX21_INT_EMMADEC (NR_IRQS_LEGACY + 50)
+#define MX21_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
+#define MX21_INT_EMMAPP (NR_IRQS_LEGACY + 52)
+#define MX21_INT_USBWKUP (NR_IRQS_LEGACY + 53)
+#define MX21_INT_USBDMA (NR_IRQS_LEGACY + 54)
+#define MX21_INT_USBHOST (NR_IRQS_LEGACY + 55)
+#define MX21_INT_USBFUNC (NR_IRQS_LEGACY + 56)
+#define MX21_INT_USBMNP (NR_IRQS_LEGACY + 57)
+#define MX21_INT_USBCTRL (NR_IRQS_LEGACY + 58)
+#define MX21_INT_SLCDC (NR_IRQS_LEGACY + 60)
+#define MX21_INT_LCDC (NR_IRQS_LEGACY + 61)
+
+/* fixed DMA request numbers */
+#define MX21_DMA_REQ_CSPI3_RX 1
+#define MX21_DMA_REQ_CSPI3_TX 2
+#define MX21_DMA_REQ_EXT 3
+#define MX21_DMA_REQ_FIRI_RX 4
+#define MX21_DMA_REQ_SDHC2 6
+#define MX21_DMA_REQ_SDHC1 7
+#define MX21_DMA_REQ_SSI2_RX0 8
+#define MX21_DMA_REQ_SSI2_TX0 9
+#define MX21_DMA_REQ_SSI2_RX1 10
+#define MX21_DMA_REQ_SSI2_TX1 11
+#define MX21_DMA_REQ_SSI1_RX0 12
+#define MX21_DMA_REQ_SSI1_TX0 13
+#define MX21_DMA_REQ_SSI1_RX1 14
+#define MX21_DMA_REQ_SSI1_TX1 15
+#define MX21_DMA_REQ_CSPI2_RX 16
+#define MX21_DMA_REQ_CSPI2_TX 17
+#define MX21_DMA_REQ_CSPI1_RX 18
+#define MX21_DMA_REQ_CSPI1_TX 19
+#define MX21_DMA_REQ_UART4_RX 20
+#define MX21_DMA_REQ_UART4_TX 21
+#define MX21_DMA_REQ_UART3_RX 22
+#define MX21_DMA_REQ_UART3_TX 23
+#define MX21_DMA_REQ_UART2_RX 24
+#define MX21_DMA_REQ_UART2_TX 25
+#define MX21_DMA_REQ_UART1_RX 26
+#define MX21_DMA_REQ_UART1_TX 27
+#define MX21_DMA_REQ_BMI_TX 28
+#define MX21_DMA_REQ_BMI_RX 29
+#define MX21_DMA_REQ_CSI_STAT 30
+#define MX21_DMA_REQ_CSI_RX 31
+
+#endif /* ifndef __MACH_MX21_H__ */
diff --git a/arch/arm/mach-imx/include/mach/mx25.h b/arch/arm/mach-imx/include/mach/mx25.h
new file mode 100644
index 0000000..ec46640
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx25.h
@@ -0,0 +1,117 @@
+#ifndef __MACH_MX25_H__
+#define __MACH_MX25_H__
+
+#define MX25_AIPS1_BASE_ADDR 0x43f00000
+#define MX25_AIPS1_SIZE SZ_1M
+#define MX25_AIPS2_BASE_ADDR 0x53f00000
+#define MX25_AIPS2_SIZE SZ_1M
+#define MX25_AVIC_BASE_ADDR 0x68000000
+#define MX25_AVIC_SIZE SZ_1M
+
+#define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000)
+#define MX25_I2C3_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x84000)
+#define MX25_CAN1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x88000)
+#define MX25_CAN2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x8c000)
+#define MX25_I2C2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x98000)
+#define MX25_CSPI1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xa4000)
+#define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000)
+
+#define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000)
+#define MX25_GPT1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x90000)
+#define MX25_GPIO4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x9c000)
+#define MX25_PWM2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa0000)
+#define MX25_GPIO3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa4000)
+#define MX25_PWM3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa8000)
+#define MX25_PWM4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xc8000)
+#define MX25_GPIO1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xcc000)
+#define MX25_GPIO2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xd0000)
+#define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000)
+#define MX25_PWM1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xe0000)
+
+#define MX25_UART1_BASE_ADDR 0x43f90000
+#define MX25_UART2_BASE_ADDR 0x43f94000
+#define MX25_AUDMUX_BASE_ADDR 0x43fb0000
+#define MX25_UART3_BASE_ADDR 0x5000c000
+#define MX25_UART4_BASE_ADDR 0x50008000
+#define MX25_UART5_BASE_ADDR 0x5002c000
+
+#define MX25_CSPI3_BASE_ADDR 0x50004000
+#define MX25_CSPI2_BASE_ADDR 0x50010000
+#define MX25_FEC_BASE_ADDR 0x50038000
+#define MX25_SSI2_BASE_ADDR 0x50014000
+#define MX25_SSI1_BASE_ADDR 0x50034000
+#define MX25_NFC_BASE_ADDR 0xbb000000
+#define MX25_IIM_BASE_ADDR 0x53ff0000
+#define MX25_DRYICE_BASE_ADDR 0x53ffc000
+#define MX25_ESDHC1_BASE_ADDR 0x53fb4000
+#define MX25_ESDHC2_BASE_ADDR 0x53fb8000
+#define MX25_LCDC_BASE_ADDR 0x53fbc000
+#define MX25_KPP_BASE_ADDR 0x43fa8000
+#define MX25_SDMA_BASE_ADDR 0x53fd4000
+#define MX25_USB_BASE_ADDR 0x53ff4000
+#define MX25_USB_OTG_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0000)
+/*
+ * The reference manual (IMX25RM, Rev. 1, 06/2009) specifies an offset of 0x200
+ * for the host controller. Early documentation drafts specified 0x400 and
+ * Freescale internal sources confirm only the latter value to work.
+ */
+#define MX25_USB_HS_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0400)
+#define MX25_CSI_BASE_ADDR 0x53ff8000
+
+#define MX25_IO_P2V(x) IMX_IO_P2V(x)
+#define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x))
+
+/*
+ * Interrupt numbers
+ */
+#include <asm/irq.h>
+#define MX25_INT_CSPI3 (NR_IRQS_LEGACY + 0)
+#define MX25_INT_I2C1 (NR_IRQS_LEGACY + 3)
+#define MX25_INT_I2C2 (NR_IRQS_LEGACY + 4)
+#define MX25_INT_UART4 (NR_IRQS_LEGACY + 5)
+#define MX25_INT_ESDHC2 (NR_IRQS_LEGACY + 8)
+#define MX25_INT_ESDHC1 (NR_IRQS_LEGACY + 9)
+#define MX25_INT_I2C3 (NR_IRQS_LEGACY + 10)
+#define MX25_INT_SSI2 (NR_IRQS_LEGACY + 11)
+#define MX25_INT_SSI1 (NR_IRQS_LEGACY + 12)
+#define MX25_INT_CSPI2 (NR_IRQS_LEGACY + 13)
+#define MX25_INT_CSPI1 (NR_IRQS_LEGACY + 14)
+#define MX25_INT_GPIO3 (NR_IRQS_LEGACY + 16)
+#define MX25_INT_CSI (NR_IRQS_LEGACY + 17)
+#define MX25_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX25_INT_GPIO4 (NR_IRQS_LEGACY + 23)
+#define MX25_INT_KPP (NR_IRQS_LEGACY + 24)
+#define MX25_INT_DRYICE (NR_IRQS_LEGACY + 25)
+#define MX25_INT_PWM1 (NR_IRQS_LEGACY + 26)
+#define MX25_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX25_INT_NFC (NR_IRQS_LEGACY + 33)
+#define MX25_INT_SDMA (NR_IRQS_LEGACY + 34)
+#define MX25_INT_USB_HS (NR_IRQS_LEGACY + 35)
+#define MX25_INT_PWM2 (NR_IRQS_LEGACY + 36)
+#define MX25_INT_USB_OTG (NR_IRQS_LEGACY + 37)
+#define MX25_INT_LCDC (NR_IRQS_LEGACY + 39)
+#define MX25_INT_UART5 (NR_IRQS_LEGACY + 40)
+#define MX25_INT_PWM3 (NR_IRQS_LEGACY + 41)
+#define MX25_INT_PWM4 (NR_IRQS_LEGACY + 42)
+#define MX25_INT_CAN1 (NR_IRQS_LEGACY + 43)
+#define MX25_INT_CAN2 (NR_IRQS_LEGACY + 44)
+#define MX25_INT_UART1 (NR_IRQS_LEGACY + 45)
+#define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51)
+#define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52)
+#define MX25_INT_GPT1 (NR_IRQS_LEGACY + 54)
+#define MX25_INT_FEC (NR_IRQS_LEGACY + 57)
+
+#define MX25_DMA_REQ_SSI2_RX1 22
+#define MX25_DMA_REQ_SSI2_TX1 23
+#define MX25_DMA_REQ_SSI2_RX0 24
+#define MX25_DMA_REQ_SSI2_TX0 25
+#define MX25_DMA_REQ_SSI1_RX1 26
+#define MX25_DMA_REQ_SSI1_TX1 27
+#define MX25_DMA_REQ_SSI1_RX0 28
+#define MX25_DMA_REQ_SSI1_TX0 29
+
+#ifndef __ASSEMBLY__
+extern int mx25_revision(void);
+#endif
+
+#endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/mach-imx/include/mach/mx27.h b/arch/arm/mach-imx/include/mach/mx27.h
new file mode 100644
index 0000000..e074616
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx27.h
@@ -0,0 +1,238 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This contains i.MX27-specific hardware definitions. For those
+ * hardware pieces that are common between i.MX21 and i.MX27, have a
+ * look at mx2x.h.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_MX27_H__
+#define __MACH_MX27_H__
+
+#define MX27_AIPI_BASE_ADDR 0x10000000
+#define MX27_AIPI_SIZE SZ_1M
+#define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000)
+#define MX27_WDOG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x02000)
+#define MX27_GPT1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x03000)
+#define MX27_GPT2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x04000)
+#define MX27_GPT3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x05000)
+#define MX27_PWM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x06000)
+#define MX27_RTC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x07000)
+#define MX27_KPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x08000)
+#define MX27_OWIRE_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x09000)
+#define MX27_UART1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0a000)
+#define MX27_UART2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0b000)
+#define MX27_UART3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0c000)
+#define MX27_UART4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0d000)
+#define MX27_CSPI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0e000)
+#define MX27_CSPI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0f000)
+#define MX27_SSI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x10000)
+#define MX27_SSI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x11000)
+#define MX27_I2C1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000)
+#define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000)
+#define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000)
+#define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000)
+#define MX27_GPIO1_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x000)
+#define MX27_GPIO2_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x100)
+#define MX27_GPIO3_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x200)
+#define MX27_GPIO4_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x300)
+#define MX27_GPIO5_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x400)
+#define MX27_GPIO6_BASE_ADDR (MX27_GPIO_BASE_ADDR + 0x500)
+#define MX27_AUDMUX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x16000)
+#define MX27_CSPI3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x17000)
+#define MX27_MSHC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x18000)
+#define MX27_GPT4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x19000)
+#define MX27_GPT5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1a000)
+#define MX27_UART5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1b000)
+#define MX27_UART6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1c000)
+#define MX27_I2C2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1d000)
+#define MX27_SDHC3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1e000)
+#define MX27_GPT6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1f000)
+#define MX27_LCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x21000)
+#define MX27_SLCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x22000)
+#define MX27_VPU_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x23000)
+#define MX27_USB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x24000)
+#define MX27_USB_OTG_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0000)
+#define MX27_USB_HS1_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0200)
+#define MX27_USB_HS2_BASE_ADDR (MX27_USB_BASE_ADDR + 0x0400)
+#define MX27_SAHARA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x25000)
+#define MX27_EMMAPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26000)
+#define MX27_EMMAPRP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26400)
+#define MX27_CCM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27000)
+#define MX27_SYSCTRL_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27800)
+#define MX27_IIM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x28000)
+#define MX27_RTIC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2a000)
+#define MX27_FEC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2b000)
+#define MX27_SCC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2c000)
+#define MX27_ETB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3b000)
+#define MX27_ETB_RAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3c000)
+#define MX27_JAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3e000)
+#define MX27_MAX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3f000)
+
+#define MX27_AVIC_BASE_ADDR 0x10040000
+
+/* ROM patch */
+#define MX27_ROMP_BASE_ADDR 0x10041000
+
+#define MX27_SAHB1_BASE_ADDR 0x80000000
+#define MX27_SAHB1_SIZE SZ_1M
+#define MX27_CSI_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x0000)
+#define MX27_ATA_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x1000)
+
+/* Memory regions and CS */
+#define MX27_SDRAM_BASE_ADDR 0xa0000000
+#define MX27_CSD1_BASE_ADDR 0xb0000000
+
+#define MX27_CS0_BASE_ADDR 0xc0000000
+#define MX27_CS1_BASE_ADDR 0xc8000000
+#define MX27_CS2_BASE_ADDR 0xd0000000
+#define MX27_CS3_BASE_ADDR 0xd2000000
+#define MX27_CS4_BASE_ADDR 0xd4000000
+#define MX27_CS5_BASE_ADDR 0xd6000000
+
+/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
+#define MX27_X_MEMC_BASE_ADDR 0xd8000000
+#define MX27_X_MEMC_SIZE SZ_1M
+#define MX27_NFC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR)
+#define MX27_SDRAMC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x1000)
+#define MX27_WEIM_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x2000)
+#define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000)
+#define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000)
+
+#define MX27_WEIM_CSCRx_BASE_ADDR(cs) (MX27_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX27_WEIM_CSCRxU(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX27_WEIM_CSCRxL(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX27_WEIM_CSCRxA(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
+#define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000
+
+/* IRAM */
+#define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */
+
+#define MX27_IO_P2V(x) IMX_IO_P2V(x)
+#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x))
+
+/* fixed interrupt numbers */
+#include <asm/irq.h>
+#define MX27_INT_I2C2 (NR_IRQS_LEGACY + 1)
+#define MX27_INT_GPT6 (NR_IRQS_LEGACY + 2)
+#define MX27_INT_GPT5 (NR_IRQS_LEGACY + 3)
+#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4)
+#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5)
+#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6)
+#define MX27_INT_SDHC (NR_IRQS_LEGACY + 7)
+#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8)
+#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9)
+#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10)
+#define MX27_INT_SDHC1 (NR_IRQS_LEGACY + 11)
+#define MX27_INT_I2C1 (NR_IRQS_LEGACY + 12)
+#define MX27_INT_SSI2 (NR_IRQS_LEGACY + 13)
+#define MX27_INT_SSI1 (NR_IRQS_LEGACY + 14)
+#define MX27_INT_CSPI2 (NR_IRQS_LEGACY + 15)
+#define MX27_INT_CSPI1 (NR_IRQS_LEGACY + 16)
+#define MX27_INT_UART4 (NR_IRQS_LEGACY + 17)
+#define MX27_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX27_INT_UART2 (NR_IRQS_LEGACY + 19)
+#define MX27_INT_UART1 (NR_IRQS_LEGACY + 20)
+#define MX27_INT_KPP (NR_IRQS_LEGACY + 21)
+#define MX27_INT_RTC (NR_IRQS_LEGACY + 22)
+#define MX27_INT_PWM (NR_IRQS_LEGACY + 23)
+#define MX27_INT_GPT3 (NR_IRQS_LEGACY + 24)
+#define MX27_INT_GPT2 (NR_IRQS_LEGACY + 25)
+#define MX27_INT_GPT1 (NR_IRQS_LEGACY + 26)
+#define MX27_INT_WDOG (NR_IRQS_LEGACY + 27)
+#define MX27_INT_PCMCIA (NR_IRQS_LEGACY + 28)
+#define MX27_INT_NFC (NR_IRQS_LEGACY + 29)
+#define MX27_INT_ATA (NR_IRQS_LEGACY + 30)
+#define MX27_INT_CSI (NR_IRQS_LEGACY + 31)
+#define MX27_INT_DMACH0 (NR_IRQS_LEGACY + 32)
+#define MX27_INT_DMACH1 (NR_IRQS_LEGACY + 33)
+#define MX27_INT_DMACH2 (NR_IRQS_LEGACY + 34)
+#define MX27_INT_DMACH3 (NR_IRQS_LEGACY + 35)
+#define MX27_INT_DMACH4 (NR_IRQS_LEGACY + 36)
+#define MX27_INT_DMACH5 (NR_IRQS_LEGACY + 37)
+#define MX27_INT_DMACH6 (NR_IRQS_LEGACY + 38)
+#define MX27_INT_DMACH7 (NR_IRQS_LEGACY + 39)
+#define MX27_INT_DMACH8 (NR_IRQS_LEGACY + 40)
+#define MX27_INT_DMACH9 (NR_IRQS_LEGACY + 41)
+#define MX27_INT_DMACH10 (NR_IRQS_LEGACY + 42)
+#define MX27_INT_DMACH11 (NR_IRQS_LEGACY + 43)
+#define MX27_INT_DMACH12 (NR_IRQS_LEGACY + 44)
+#define MX27_INT_DMACH13 (NR_IRQS_LEGACY + 45)
+#define MX27_INT_DMACH14 (NR_IRQS_LEGACY + 46)
+#define MX27_INT_DMACH15 (NR_IRQS_LEGACY + 47)
+#define MX27_INT_UART6 (NR_IRQS_LEGACY + 48)
+#define MX27_INT_UART5 (NR_IRQS_LEGACY + 49)
+#define MX27_INT_FEC (NR_IRQS_LEGACY + 50)
+#define MX27_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
+#define MX27_INT_EMMAPP (NR_IRQS_LEGACY + 52)
+#define MX27_INT_VPU (NR_IRQS_LEGACY + 53)
+#define MX27_INT_USB_HS1 (NR_IRQS_LEGACY + 54)
+#define MX27_INT_USB_HS2 (NR_IRQS_LEGACY + 55)
+#define MX27_INT_USB_OTG (NR_IRQS_LEGACY + 56)
+#define MX27_INT_SCC_SMN (NR_IRQS_LEGACY + 57)
+#define MX27_INT_SCC_SCM (NR_IRQS_LEGACY + 58)
+#define MX27_INT_SAHARA (NR_IRQS_LEGACY + 59)
+#define MX27_INT_SLCDC (NR_IRQS_LEGACY + 60)
+#define MX27_INT_LCDC (NR_IRQS_LEGACY + 61)
+#define MX27_INT_IIM (NR_IRQS_LEGACY + 62)
+#define MX27_INT_CCM (NR_IRQS_LEGACY + 63)
+
+/* fixed DMA request numbers */
+#define MX27_DMA_REQ_CSPI3_RX 1
+#define MX27_DMA_REQ_CSPI3_TX 2
+#define MX27_DMA_REQ_EXT 3
+#define MX27_DMA_REQ_MSHC 4
+#define MX27_DMA_REQ_SDHC2 6
+#define MX27_DMA_REQ_SDHC1 7
+#define MX27_DMA_REQ_SSI2_RX0 8
+#define MX27_DMA_REQ_SSI2_TX0 9
+#define MX27_DMA_REQ_SSI2_RX1 10
+#define MX27_DMA_REQ_SSI2_TX1 11
+#define MX27_DMA_REQ_SSI1_RX0 12
+#define MX27_DMA_REQ_SSI1_TX0 13
+#define MX27_DMA_REQ_SSI1_RX1 14
+#define MX27_DMA_REQ_SSI1_TX1 15
+#define MX27_DMA_REQ_CSPI2_RX 16
+#define MX27_DMA_REQ_CSPI2_TX 17
+#define MX27_DMA_REQ_CSPI1_RX 18
+#define MX27_DMA_REQ_CSPI1_TX 19
+#define MX27_DMA_REQ_UART4_RX 20
+#define MX27_DMA_REQ_UART4_TX 21
+#define MX27_DMA_REQ_UART3_RX 22
+#define MX27_DMA_REQ_UART3_TX 23
+#define MX27_DMA_REQ_UART2_RX 24
+#define MX27_DMA_REQ_UART2_TX 25
+#define MX27_DMA_REQ_UART1_RX 26
+#define MX27_DMA_REQ_UART1_TX 27
+#define MX27_DMA_REQ_ATA_TX 28
+#define MX27_DMA_REQ_ATA_RCV 29
+#define MX27_DMA_REQ_CSI_STAT 30
+#define MX27_DMA_REQ_CSI_RX 31
+#define MX27_DMA_REQ_UART5_TX 32
+#define MX27_DMA_REQ_UART5_RX 33
+#define MX27_DMA_REQ_UART6_TX 34
+#define MX27_DMA_REQ_UART6_RX 35
+#define MX27_DMA_REQ_SDHC3 36
+#define MX27_DMA_REQ_NFC 37
+
+#ifndef __ASSEMBLY__
+extern int mx27_revision(void);
+#endif
+
+#endif /* ifndef __MACH_MX27_H__ */
diff --git a/arch/arm/mach-imx/include/mach/mx2x.h b/arch/arm/mach-imx/include/mach/mx2x.h
new file mode 100644
index 0000000..11642f5
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx2x.h
@@ -0,0 +1,145 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This contains hardware definitions that are common between i.MX21 and
+ * i.MX27.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_MX2x_H__
+#define __MACH_MX2x_H__
+
+/* The following addresses are common between i.MX21 and i.MX27 */
+
+/* Register offsets */
+#define MX2x_AIPI_BASE_ADDR 0x10000000
+#define MX2x_AIPI_SIZE SZ_1M
+#define MX2x_DMA_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x01000)
+#define MX2x_WDOG_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x02000)
+#define MX2x_GPT1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x03000)
+#define MX2x_GPT2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x04000)
+#define MX2x_GPT3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x05000)
+#define MX2x_PWM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x06000)
+#define MX2x_RTC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x07000)
+#define MX2x_KPP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x08000)
+#define MX2x_OWIRE_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x09000)
+#define MX2x_UART1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0a000)
+#define MX2x_UART2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0b000)
+#define MX2x_UART3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0c000)
+#define MX2x_UART4_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0d000)
+#define MX2x_CSPI1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0e000)
+#define MX2x_CSPI2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0f000)
+#define MX2x_SSI1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x10000)
+#define MX2x_SSI2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x11000)
+#define MX2x_I2C_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x12000)
+#define MX2x_SDHC1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x13000)
+#define MX2x_SDHC2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x14000)
+#define MX2x_GPIO_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x15000)
+#define MX2x_AUDMUX_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x16000)
+#define MX2x_CSPI3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x17000)
+#define MX2x_LCDC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x21000)
+#define MX2x_SLCDC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x22000)
+#define MX2x_USBOTG_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x24000)
+#define MX2x_EMMA_PP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x26000)
+#define MX2x_EMMA_PRP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x26400)
+#define MX2x_CCM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x27000)
+#define MX2x_SYSCTRL_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x27800)
+#define MX2x_JAM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x3e000)
+#define MX2x_MAX_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x3f000)
+
+#define MX2x_AVIC_BASE_ADDR 0x10040000
+
+#define MX2x_SAHB1_BASE_ADDR 0x80000000
+#define MX2x_SAHB1_SIZE SZ_1M
+#define MX2x_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000)
+
+/* fixed interrupt numbers */
+#include <asm/irq.h>
+#define MX2x_INT_CSPI3 (NR_IRQS_LEGACY + 6)
+#define MX2x_INT_GPIO (NR_IRQS_LEGACY + 8)
+#define MX2x_INT_SDHC2 (NR_IRQS_LEGACY + 10)
+#define MX2x_INT_SDHC1 (NR_IRQS_LEGACY + 11)
+#define MX2x_INT_I2C (NR_IRQS_LEGACY + 12)
+#define MX2x_INT_SSI2 (NR_IRQS_LEGACY + 13)
+#define MX2x_INT_SSI1 (NR_IRQS_LEGACY + 14)
+#define MX2x_INT_CSPI2 (NR_IRQS_LEGACY + 15)
+#define MX2x_INT_CSPI1 (NR_IRQS_LEGACY + 16)
+#define MX2x_INT_UART4 (NR_IRQS_LEGACY + 17)
+#define MX2x_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX2x_INT_UART2 (NR_IRQS_LEGACY + 19)
+#define MX2x_INT_UART1 (NR_IRQS_LEGACY + 20)
+#define MX2x_INT_KPP (NR_IRQS_LEGACY + 21)
+#define MX2x_INT_RTC (NR_IRQS_LEGACY + 22)
+#define MX2x_INT_PWM (NR_IRQS_LEGACY + 23)
+#define MX2x_INT_GPT3 (NR_IRQS_LEGACY + 24)
+#define MX2x_INT_GPT2 (NR_IRQS_LEGACY + 25)
+#define MX2x_INT_GPT1 (NR_IRQS_LEGACY + 26)
+#define MX2x_INT_WDOG (NR_IRQS_LEGACY + 27)
+#define MX2x_INT_PCMCIA (NR_IRQS_LEGACY + 28)
+#define MX2x_INT_NANDFC (NR_IRQS_LEGACY + 29)
+#define MX2x_INT_CSI (NR_IRQS_LEGACY + 31)
+#define MX2x_INT_DMACH0 (NR_IRQS_LEGACY + 32)
+#define MX2x_INT_DMACH1 (NR_IRQS_LEGACY + 33)
+#define MX2x_INT_DMACH2 (NR_IRQS_LEGACY + 34)
+#define MX2x_INT_DMACH3 (NR_IRQS_LEGACY + 35)
+#define MX2x_INT_DMACH4 (NR_IRQS_LEGACY + 36)
+#define MX2x_INT_DMACH5 (NR_IRQS_LEGACY + 37)
+#define MX2x_INT_DMACH6 (NR_IRQS_LEGACY + 38)
+#define MX2x_INT_DMACH7 (NR_IRQS_LEGACY + 39)
+#define MX2x_INT_DMACH8 (NR_IRQS_LEGACY + 40)
+#define MX2x_INT_DMACH9 (NR_IRQS_LEGACY + 41)
+#define MX2x_INT_DMACH10 (NR_IRQS_LEGACY + 42)
+#define MX2x_INT_DMACH11 (NR_IRQS_LEGACY + 43)
+#define MX2x_INT_DMACH12 (NR_IRQS_LEGACY + 44)
+#define MX2x_INT_DMACH13 (NR_IRQS_LEGACY + 45)
+#define MX2x_INT_DMACH14 (NR_IRQS_LEGACY + 46)
+#define MX2x_INT_DMACH15 (NR_IRQS_LEGACY + 47)
+#define MX2x_INT_EMMAPRP (NR_IRQS_LEGACY + 51)
+#define MX2x_INT_EMMAPP (NR_IRQS_LEGACY + 52)
+#define MX2x_INT_SLCDC (NR_IRQS_LEGACY + 60)
+#define MX2x_INT_LCDC (NR_IRQS_LEGACY + 61)
+
+/* fixed DMA request numbers */
+#define MX2x_DMA_REQ_CSPI3_RX 1
+#define MX2x_DMA_REQ_CSPI3_TX 2
+#define MX2x_DMA_REQ_EXT 3
+#define MX2x_DMA_REQ_SDHC2 6
+#define MX2x_DMA_REQ_SDHC1 7
+#define MX2x_DMA_REQ_SSI2_RX0 8
+#define MX2x_DMA_REQ_SSI2_TX0 9
+#define MX2x_DMA_REQ_SSI2_RX1 10
+#define MX2x_DMA_REQ_SSI2_TX1 11
+#define MX2x_DMA_REQ_SSI1_RX0 12
+#define MX2x_DMA_REQ_SSI1_TX0 13
+#define MX2x_DMA_REQ_SSI1_RX1 14
+#define MX2x_DMA_REQ_SSI1_TX1 15
+#define MX2x_DMA_REQ_CSPI2_RX 16
+#define MX2x_DMA_REQ_CSPI2_TX 17
+#define MX2x_DMA_REQ_CSPI1_RX 18
+#define MX2x_DMA_REQ_CSPI1_TX 19
+#define MX2x_DMA_REQ_UART4_RX 20
+#define MX2x_DMA_REQ_UART4_TX 21
+#define MX2x_DMA_REQ_UART3_RX 22
+#define MX2x_DMA_REQ_UART3_TX 23
+#define MX2x_DMA_REQ_UART2_RX 24
+#define MX2x_DMA_REQ_UART2_TX 25
+#define MX2x_DMA_REQ_UART1_RX 26
+#define MX2x_DMA_REQ_UART1_TX 27
+#define MX2x_DMA_REQ_CSI_STAT 30
+#define MX2x_DMA_REQ_CSI_RX 31
+
+#endif /* ifndef __MACH_MX2x_H__ */
diff --git a/arch/arm/mach-imx/include/mach/mx31.h b/arch/arm/mach-imx/include/mach/mx31.h
new file mode 100644
index 0000000..ee9b1f9
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx31.h
@@ -0,0 +1,196 @@
+#ifndef __MACH_MX31_H__
+#define __MACH_MX31_H__
+
+/*
+ * IRAM
+ */
+#define MX31_IRAM_BASE_ADDR 0x1ffc0000 /* internal ram */
+#define MX31_IRAM_SIZE SZ_16K
+
+#define MX31_L2CC_BASE_ADDR 0x30000000
+#define MX31_L2CC_SIZE SZ_1M
+
+#define MX31_AIPS1_BASE_ADDR 0x43f00000
+#define MX31_AIPS1_SIZE SZ_1M
+#define MX31_MAX_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x04000)
+#define MX31_EVTMON_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x08000)
+#define MX31_CLKCTL_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x0c000)
+#define MX31_ETB_SLOT4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x10000)
+#define MX31_ETB_SLOT5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x14000)
+#define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000)
+#define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000)
+#define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000)
+#define MX31_USB_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000)
+#define MX31_USB_OTG_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0000)
+#define MX31_USB_HS1_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0200)
+#define MX31_USB_HS2_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0400)
+#define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000)
+#define MX31_UART1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x90000)
+#define MX31_UART2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x94000)
+#define MX31_I2C2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x98000)
+#define MX31_OWIRE_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x9c000)
+#define MX31_SSI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa0000)
+#define MX31_CSPI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa4000)
+#define MX31_KPP_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa8000)
+#define MX31_IOMUXC_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xac000)
+#define MX31_UART4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb0000)
+#define MX31_UART5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb4000)
+#define MX31_ECT_IP1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb8000)
+#define MX31_ECT_IP2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xbc000)
+
+#define MX31_SPBA0_BASE_ADDR 0x50000000
+#define MX31_SPBA0_SIZE SZ_1M
+#define MX31_SDHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x04000)
+#define MX31_SDHC2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x08000)
+#define MX31_UART3_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x0c000)
+#define MX31_CSPI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x10000)
+#define MX31_SSI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x14000)
+#define MX31_SIM1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x18000)
+#define MX31_IIM_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x1c000)
+#define MX31_ATA_DMA_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x20000)
+#define MX31_MSHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x24000)
+#define MX31_SPBA_CTRL_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x3c000)
+
+#define MX31_AIPS2_BASE_ADDR 0x53f00000
+#define MX31_AIPS2_SIZE SZ_1M
+#define MX31_CCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x80000)
+#define MX31_CSPI3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x84000)
+#define MX31_FIRI_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x8c000)
+#define MX31_GPT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x90000)
+#define MX31_EPIT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x94000)
+#define MX31_EPIT2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x98000)
+#define MX31_GPIO3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xa4000)
+#define MX31_SCC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xac000)
+#define MX31_SCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xae000)
+#define MX31_SMN_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xaf000)
+#define MX31_RNGA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xb0000)
+#define MX31_IPU_CTRL_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc0000)
+#define MX31_AUDMUX_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc4000)
+#define MX31_MPEG4_ENC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc8000)
+#define MX31_GPIO1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xcc000)
+#define MX31_GPIO2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd0000)
+#define MX31_SDMA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd4000)
+#define MX31_RTC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd8000)
+#define MX31_WDOG_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xdc000)
+#define MX31_PWM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xe0000)
+#define MX31_RTIC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xec000)
+
+#define MX31_ROMP_BASE_ADDR 0x60000000
+#define MX31_ROMP_BASE_ADDR_VIRT IOMEM(0xfc500000)
+#define MX31_ROMP_SIZE SZ_1M
+
+#define MX31_AVIC_BASE_ADDR 0x68000000
+#define MX31_AVIC_SIZE SZ_1M
+
+#define MX31_IPU_MEM_BASE_ADDR 0x70000000
+#define MX31_CSD0_BASE_ADDR 0x80000000
+#define MX31_CSD1_BASE_ADDR 0x90000000
+
+#define MX31_CS0_BASE_ADDR 0xa0000000
+#define MX31_CS1_BASE_ADDR 0xa8000000
+#define MX31_CS2_BASE_ADDR 0xb0000000
+#define MX31_CS3_BASE_ADDR 0xb2000000
+
+#define MX31_CS4_BASE_ADDR 0xb4000000
+#define MX31_CS4_BASE_ADDR_VIRT IOMEM(0xf6000000)
+#define MX31_CS4_SIZE SZ_32M
+
+#define MX31_CS5_BASE_ADDR 0xb6000000
+#define MX31_CS5_BASE_ADDR_VIRT IOMEM(0xf8000000)
+#define MX31_CS5_SIZE SZ_32M
+
+#define MX31_X_MEMC_BASE_ADDR 0xb8000000
+#define MX31_X_MEMC_SIZE SZ_64K
+#define MX31_NFC_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x0000)
+#define MX31_ESDCTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x1000)
+#define MX31_WEIM_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x2000)
+#define MX31_M3IF_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x3000)
+#define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000)
+#define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR
+
+#define MX31_WEIM_CSCRx_BASE_ADDR(cs) (MX31_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX31_WEIM_CSCRxU(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX31_WEIM_CSCRxL(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX31_WEIM_CSCRxA(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
+#define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000
+
+#define MX31_IO_P2V(x) IMX_IO_P2V(x)
+#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x))
+
+/*
+ * Interrupt numbers
+ */
+#include <asm/irq.h>
+#define MX31_INT_I2C3 (NR_IRQS_LEGACY + 3)
+#define MX31_INT_I2C2 (NR_IRQS_LEGACY + 4)
+#define MX31_INT_MPEG4_ENCODER (NR_IRQS_LEGACY + 5)
+#define MX31_INT_RTIC (NR_IRQS_LEGACY + 6)
+#define MX31_INT_FIRI (NR_IRQS_LEGACY + 7)
+#define MX31_INT_SDHC2 (NR_IRQS_LEGACY + 8)
+#define MX31_INT_SDHC1 (NR_IRQS_LEGACY + 9)
+#define MX31_INT_I2C1 (NR_IRQS_LEGACY + 10)
+#define MX31_INT_SSI2 (NR_IRQS_LEGACY + 11)
+#define MX31_INT_SSI1 (NR_IRQS_LEGACY + 12)
+#define MX31_INT_CSPI2 (NR_IRQS_LEGACY + 13)
+#define MX31_INT_CSPI1 (NR_IRQS_LEGACY + 14)
+#define MX31_INT_ATA (NR_IRQS_LEGACY + 15)
+#define MX31_INT_MBX (NR_IRQS_LEGACY + 16)
+#define MX31_INT_CSPI3 (NR_IRQS_LEGACY + 17)
+#define MX31_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX31_INT_IIM (NR_IRQS_LEGACY + 19)
+#define MX31_INT_SIM2 (NR_IRQS_LEGACY + 20)
+#define MX31_INT_SIM1 (NR_IRQS_LEGACY + 21)
+#define MX31_INT_RNGA (NR_IRQS_LEGACY + 22)
+#define MX31_INT_EVTMON (NR_IRQS_LEGACY + 23)
+#define MX31_INT_KPP (NR_IRQS_LEGACY + 24)
+#define MX31_INT_RTC (NR_IRQS_LEGACY + 25)
+#define MX31_INT_PWM (NR_IRQS_LEGACY + 26)
+#define MX31_INT_EPIT2 (NR_IRQS_LEGACY + 27)
+#define MX31_INT_EPIT1 (NR_IRQS_LEGACY + 28)
+#define MX31_INT_GPT (NR_IRQS_LEGACY + 29)
+#define MX31_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
+#define MX31_INT_CCM_DVFS (NR_IRQS_LEGACY + 31)
+#define MX31_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX31_INT_NFC (NR_IRQS_LEGACY + 33)
+#define MX31_INT_SDMA (NR_IRQS_LEGACY + 34)
+#define MX31_INT_USB_HS1 (NR_IRQS_LEGACY + 35)
+#define MX31_INT_USB_HS2 (NR_IRQS_LEGACY + 36)
+#define MX31_INT_USB_OTG (NR_IRQS_LEGACY + 37)
+#define MX31_INT_MSHC1 (NR_IRQS_LEGACY + 39)
+#define MX31_INT_MSHC2 (NR_IRQS_LEGACY + 40)
+#define MX31_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
+#define MX31_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
+#define MX31_INT_UART1 (NR_IRQS_LEGACY + 45)
+#define MX31_INT_UART4 (NR_IRQS_LEGACY + 46)
+#define MX31_INT_UART5 (NR_IRQS_LEGACY + 47)
+#define MX31_INT_ECT (NR_IRQS_LEGACY + 48)
+#define MX31_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
+#define MX31_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
+#define MX31_INT_GPIO2 (NR_IRQS_LEGACY + 51)
+#define MX31_INT_GPIO1 (NR_IRQS_LEGACY + 52)
+#define MX31_INT_CCM (NR_IRQS_LEGACY + 53)
+#define MX31_INT_PCMCIA (NR_IRQS_LEGACY + 54)
+#define MX31_INT_WDOG (NR_IRQS_LEGACY + 55)
+#define MX31_INT_GPIO3 (NR_IRQS_LEGACY + 56)
+#define MX31_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
+#define MX31_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
+#define MX31_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
+#define MX31_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
+#define MX31_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
+#define MX31_INT_EXT_TV (NR_IRQS_LEGACY + 63)
+
+#define MX31_DMA_REQ_SDHC1 20
+#define MX31_DMA_REQ_SDHC2 21
+#define MX31_DMA_REQ_SSI2_RX1 22
+#define MX31_DMA_REQ_SSI2_TX1 23
+#define MX31_DMA_REQ_SSI2_RX0 24
+#define MX31_DMA_REQ_SSI2_TX0 25
+#define MX31_DMA_REQ_SSI1_RX1 26
+#define MX31_DMA_REQ_SSI1_TX1 27
+#define MX31_DMA_REQ_SSI1_RX0 28
+#define MX31_DMA_REQ_SSI1_TX0 29
+
+#define MX31_PROD_SIGNATURE 0x1 /* For MX31 */
+
+#endif /* ifndef __MACH_MX31_H__ */
diff --git a/arch/arm/mach-imx/include/mach/mx35.h b/arch/arm/mach-imx/include/mach/mx35.h
new file mode 100644
index 0000000..2af5d3a
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx35.h
@@ -0,0 +1,190 @@
+#ifndef __MACH_MX35_H__
+#define __MACH_MX35_H__
+
+/*
+ * IRAM
+ */
+#define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */
+#define MX35_IRAM_SIZE SZ_128K
+
+#define MX35_L2CC_BASE_ADDR 0x30000000
+#define MX35_L2CC_SIZE SZ_1M
+
+#define MX35_AIPS1_BASE_ADDR 0x43f00000
+#define MX35_AIPS1_SIZE SZ_1M
+#define MX35_MAX_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x04000)
+#define MX35_EVTMON_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x08000)
+#define MX35_CLKCTL_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x0c000)
+#define MX35_ETB_SLOT4_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x10000)
+#define MX35_ETB_SLOT5_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x14000)
+#define MX35_ECT_CTIO_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x18000)
+#define MX35_I2C1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000)
+#define MX35_I2C3_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x84000)
+#define MX35_UART1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x90000)
+#define MX35_UART2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x94000)
+#define MX35_I2C2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x98000)
+#define MX35_OWIRE_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x9c000)
+#define MX35_SSI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa0000)
+#define MX35_CSPI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa4000)
+#define MX35_KPP_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa8000)
+#define MX35_IOMUXC_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xac000)
+#define MX35_ECT_IP1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xb8000)
+#define MX35_ECT_IP2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xbc000)
+
+#define MX35_SPBA0_BASE_ADDR 0x50000000
+#define MX35_SPBA0_SIZE SZ_1M
+#define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000)
+#define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000)
+#define MX35_SSI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x14000)
+#define MX35_ATA_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x20000)
+#define MX35_MSHC1_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x24000)
+#define MX35_FEC_BASE_ADDR 0x50038000
+#define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000)
+
+#define MX35_AIPS2_BASE_ADDR 0x53f00000
+#define MX35_AIPS2_SIZE SZ_1M
+#define MX35_CCM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x80000)
+#define MX35_GPT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x90000)
+#define MX35_EPIT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x94000)
+#define MX35_EPIT2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x98000)
+#define MX35_GPIO3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xa4000)
+#define MX35_SCC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xac000)
+#define MX35_RNGA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb0000)
+#define MX35_ESDHC1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb4000)
+#define MX35_ESDHC2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb8000)
+#define MX35_ESDHC3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xbc000)
+#define MX35_IPU_CTRL_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc0000)
+#define MX35_AUDMUX_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc4000)
+#define MX35_GPIO1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xcc000)
+#define MX35_GPIO2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd0000)
+#define MX35_SDMA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd4000)
+#define MX35_RTC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd8000)
+#define MX35_WDOG_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xdc000)
+#define MX35_PWM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe0000)
+#define MX35_CAN1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe4000)
+#define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000)
+#define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000)
+#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000)
+#define MX35_USB_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf4000)
+#define MX35_USB_OTG_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0000)
+/*
+ * The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for
+ * HS. When host support was implemented only a preliminary document was
+ * available, which told 0x400. This works fine.
+ */
+#define MX35_USB_HS_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0400)
+
+#define MX35_ROMP_BASE_ADDR 0x60000000
+#define MX35_ROMP_SIZE SZ_1M
+
+#define MX35_AVIC_BASE_ADDR 0x68000000
+#define MX35_AVIC_SIZE SZ_1M
+
+/*
+ * Memory regions and CS
+ */
+#define MX35_IPU_MEM_BASE_ADDR 0x70000000
+#define MX35_CSD0_BASE_ADDR 0x80000000
+#define MX35_CSD1_BASE_ADDR 0x90000000
+
+#define MX35_CS0_BASE_ADDR 0xa0000000
+#define MX35_CS1_BASE_ADDR 0xa8000000
+#define MX35_CS2_BASE_ADDR 0xb0000000
+#define MX35_CS3_BASE_ADDR 0xb2000000
+
+#define MX35_CS4_BASE_ADDR 0xb4000000
+#define MX35_CS4_BASE_ADDR_VIRT 0xf6000000
+#define MX35_CS4_SIZE SZ_32M
+
+#define MX35_CS5_BASE_ADDR 0xb6000000
+#define MX35_CS5_BASE_ADDR_VIRT 0xf8000000
+#define MX35_CS5_SIZE SZ_32M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MX35_X_MEMC_BASE_ADDR 0xb8000000
+#define MX35_X_MEMC_SIZE SZ_64K
+#define MX35_ESDCTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x1000)
+#define MX35_WEIM_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x2000)
+#define MX35_M3IF_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x3000)
+#define MX35_EMI_CTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x4000)
+#define MX35_PCMCIA_CTL_BASE_ADDR MX35_EMI_CTL_BASE_ADDR
+
+#define MX35_NFC_BASE_ADDR 0xbb000000
+#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000
+
+#define MX35_IO_P2V(x) IMX_IO_P2V(x)
+#define MX35_IO_ADDRESS(x) IOMEM(MX35_IO_P2V(x))
+
+/*
+ * Interrupt numbers
+ */
+#include <asm/irq.h>
+#define MX35_INT_OWIRE (NR_IRQS_LEGACY + 2)
+#define MX35_INT_I2C3 (NR_IRQS_LEGACY + 3)
+#define MX35_INT_I2C2 (NR_IRQS_LEGACY + 4)
+#define MX35_INT_RTIC (NR_IRQS_LEGACY + 6)
+#define MX35_INT_ESDHC1 (NR_IRQS_LEGACY + 7)
+#define MX35_INT_ESDHC2 (NR_IRQS_LEGACY + 8)
+#define MX35_INT_ESDHC3 (NR_IRQS_LEGACY + 9)
+#define MX35_INT_I2C1 (NR_IRQS_LEGACY + 10)
+#define MX35_INT_SSI1 (NR_IRQS_LEGACY + 11)
+#define MX35_INT_SSI2 (NR_IRQS_LEGACY + 12)
+#define MX35_INT_CSPI2 (NR_IRQS_LEGACY + 13)
+#define MX35_INT_CSPI1 (NR_IRQS_LEGACY + 14)
+#define MX35_INT_ATA (NR_IRQS_LEGACY + 15)
+#define MX35_INT_GPU2D (NR_IRQS_LEGACY + 16)
+#define MX35_INT_ASRC (NR_IRQS_LEGACY + 17)
+#define MX35_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX35_INT_IIM (NR_IRQS_LEGACY + 19)
+#define MX35_INT_RNGA (NR_IRQS_LEGACY + 22)
+#define MX35_INT_EVTMON (NR_IRQS_LEGACY + 23)
+#define MX35_INT_KPP (NR_IRQS_LEGACY + 24)
+#define MX35_INT_RTC (NR_IRQS_LEGACY + 25)
+#define MX35_INT_PWM (NR_IRQS_LEGACY + 26)
+#define MX35_INT_EPIT2 (NR_IRQS_LEGACY + 27)
+#define MX35_INT_EPIT1 (NR_IRQS_LEGACY + 28)
+#define MX35_INT_GPT (NR_IRQS_LEGACY + 29)
+#define MX35_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
+#define MX35_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX35_INT_NFC (NR_IRQS_LEGACY + 33)
+#define MX35_INT_SDMA (NR_IRQS_LEGACY + 34)
+#define MX35_INT_USB_HS (NR_IRQS_LEGACY + 35)
+#define MX35_INT_USB_OTG (NR_IRQS_LEGACY + 37)
+#define MX35_INT_MSHC1 (NR_IRQS_LEGACY + 39)
+#define MX35_INT_ESAI (NR_IRQS_LEGACY + 40)
+#define MX35_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
+#define MX35_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
+#define MX35_INT_CAN1 (NR_IRQS_LEGACY + 43)
+#define MX35_INT_CAN2 (NR_IRQS_LEGACY + 44)
+#define MX35_INT_UART1 (NR_IRQS_LEGACY + 45)
+#define MX35_INT_MLB (NR_IRQS_LEGACY + 46)
+#define MX35_INT_SPDIF (NR_IRQS_LEGACY + 47)
+#define MX35_INT_ECT (NR_IRQS_LEGACY + 48)
+#define MX35_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
+#define MX35_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
+#define MX35_INT_GPIO2 (NR_IRQS_LEGACY + 51)
+#define MX35_INT_GPIO1 (NR_IRQS_LEGACY + 52)
+#define MX35_INT_WDOG (NR_IRQS_LEGACY + 55)
+#define MX35_INT_GPIO3 (NR_IRQS_LEGACY + 56)
+#define MX35_INT_FEC (NR_IRQS_LEGACY + 57)
+#define MX35_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
+#define MX35_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
+#define MX35_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
+#define MX35_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
+#define MX35_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
+#define MX35_INT_EXT_TV (NR_IRQS_LEGACY + 63)
+
+#define MX35_DMA_REQ_SSI2_RX1 22
+#define MX35_DMA_REQ_SSI2_TX1 23
+#define MX35_DMA_REQ_SSI2_RX0 24
+#define MX35_DMA_REQ_SSI2_TX0 25
+#define MX35_DMA_REQ_SSI1_RX1 26
+#define MX35_DMA_REQ_SSI1_TX1 27
+#define MX35_DMA_REQ_SSI1_RX0 28
+#define MX35_DMA_REQ_SSI1_TX0 29
+
+#define MX35_PROD_SIGNATURE 0x1 /* For MX31 */
+
+#endif /* ifndef __MACH_MX35_H__ */
diff --git a/arch/arm/mach-imx/include/mach/mx3x.h b/arch/arm/mach-imx/include/mach/mx3x.h
new file mode 100644
index 0000000..96fb4fb
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx3x.h
@@ -0,0 +1,195 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MX3x_H__
+#define __MACH_MX3x_H__
+
+/*
+ * MX31 memory map:
+ *
+ * Virt Phys Size What
+ * ---------------------------------------------------------------------------
+ * FC000000 43F00000 1M AIPS 1
+ * FC100000 50000000 1M SPBA
+ * FC200000 53F00000 1M AIPS 2
+ * FC500000 60000000 128M ROMPATCH
+ * FC400000 68000000 128M AVIC
+ * 70000000 256M IPU (MAX M2)
+ * 80000000 256M CSD0 SDRAM/DDR
+ * 90000000 256M CSD1 SDRAM/DDR
+ * A0000000 128M CS0 Flash
+ * A8000000 128M CS1 Flash
+ * B0000000 32M CS2
+ * B2000000 32M CS3
+ * F4000000 B4000000 32M CS4
+ * B6000000 32M CS5
+ * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers
+ * C0000000 64M PCMCIA/CF
+ */
+
+/*
+ * L2CC
+ */
+#define MX3x_L2CC_BASE_ADDR 0x30000000
+#define MX3x_L2CC_SIZE SZ_1M
+
+/*
+ * AIPS 1
+ */
+#define MX3x_AIPS1_BASE_ADDR 0x43f00000
+#define MX3x_AIPS1_SIZE SZ_1M
+#define MX3x_MAX_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x04000)
+#define MX3x_EVTMON_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x08000)
+#define MX3x_CLKCTL_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x0c000)
+#define MX3x_ETB_SLOT4_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x10000)
+#define MX3x_ETB_SLOT5_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x14000)
+#define MX3x_ECT_CTIO_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x18000)
+#define MX3x_I2C_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x80000)
+#define MX3x_I2C3_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x84000)
+#define MX3x_UART1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x90000)
+#define MX3x_UART2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x94000)
+#define MX3x_I2C2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x98000)
+#define MX3x_OWIRE_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x9c000)
+#define MX3x_SSI1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa0000)
+#define MX3x_CSPI1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa4000)
+#define MX3x_KPP_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa8000)
+#define MX3x_IOMUXC_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xac000)
+#define MX3x_ECT_IP1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xb8000)
+#define MX3x_ECT_IP2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xbc000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX3x_SPBA0_BASE_ADDR 0x50000000
+#define MX3x_SPBA0_SIZE SZ_1M
+#define MX3x_UART3_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x0c000)
+#define MX3x_CSPI2_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x10000)
+#define MX3x_SSI2_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x14000)
+#define MX3x_ATA_DMA_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x20000)
+#define MX3x_MSHC1_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x24000)
+#define MX3x_SPBA_CTRL_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x3c000)
+
+/*
+ * AIPS 2
+ */
+#define MX3x_AIPS2_BASE_ADDR 0x53f00000
+#define MX3x_AIPS2_SIZE SZ_1M
+#define MX3x_CCM_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x80000)
+#define MX3x_GPT1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x90000)
+#define MX3x_EPIT1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x94000)
+#define MX3x_EPIT2_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x98000)
+#define MX3x_GPIO3_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xa4000)
+#define MX3x_SCC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xac000)
+#define MX3x_RNGA_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xb0000)
+#define MX3x_IPU_CTRL_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xc0000)
+#define MX3x_AUDMUX_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xc4000)
+#define MX3x_GPIO1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xcc000)
+#define MX3x_GPIO2_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd0000)
+#define MX3x_SDMA_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd4000)
+#define MX3x_RTC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd8000)
+#define MX3x_WDOG_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xdc000)
+#define MX3x_PWM_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xe0000)
+#define MX3x_RTIC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xec000)
+
+/*
+ * ROMP and AVIC
+ */
+#define MX3x_ROMP_BASE_ADDR 0x60000000
+#define MX3x_ROMP_SIZE SZ_1M
+
+#define MX3x_AVIC_BASE_ADDR 0x68000000
+#define MX3x_AVIC_SIZE SZ_1M
+
+/*
+ * Memory regions and CS
+ */
+#define MX3x_IPU_MEM_BASE_ADDR 0x70000000
+#define MX3x_CSD0_BASE_ADDR 0x80000000
+#define MX3x_CSD1_BASE_ADDR 0x90000000
+
+#define MX3x_CS0_BASE_ADDR 0xa0000000
+#define MX3x_CS1_BASE_ADDR 0xa8000000
+#define MX3x_CS2_BASE_ADDR 0xb0000000
+#define MX3x_CS3_BASE_ADDR 0xb2000000
+
+#define MX3x_CS4_BASE_ADDR 0xb4000000
+#define MX3x_CS4_BASE_ADDR_VIRT 0xf6000000
+#define MX3x_CS4_SIZE SZ_32M
+
+#define MX3x_CS5_BASE_ADDR 0xb6000000
+#define MX3x_CS5_BASE_ADDR_VIRT 0xf8000000
+#define MX3x_CS5_SIZE SZ_32M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MX3x_X_MEMC_BASE_ADDR 0xb8000000
+#define MX3x_X_MEMC_SIZE SZ_64K
+#define MX3x_ESDCTL_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x1000)
+#define MX3x_WEIM_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x2000)
+#define MX3x_M3IF_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x3000)
+#define MX3x_EMI_CTL_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x4000)
+#define MX3x_PCMCIA_CTL_BASE_ADDR MX3x_EMI_CTL_BASE_ADDR
+
+#define MX3x_PCMCIA_MEM_BASE_ADDR 0xbc000000
+
+/*
+ * Interrupt numbers
+ */
+#include <asm/irq.h>
+#define MX3x_INT_I2C3 (NR_IRQS_LEGACY + 3)
+#define MX3x_INT_I2C2 (NR_IRQS_LEGACY + 4)
+#define MX3x_INT_RTIC (NR_IRQS_LEGACY + 6)
+#define MX3x_INT_I2C (NR_IRQS_LEGACY + 10)
+#define MX3x_INT_CSPI2 (NR_IRQS_LEGACY + 13)
+#define MX3x_INT_CSPI1 (NR_IRQS_LEGACY + 14)
+#define MX3x_INT_ATA (NR_IRQS_LEGACY + 15)
+#define MX3x_INT_UART3 (NR_IRQS_LEGACY + 18)
+#define MX3x_INT_IIM (NR_IRQS_LEGACY + 19)
+#define MX3x_INT_RNGA (NR_IRQS_LEGACY + 22)
+#define MX3x_INT_EVTMON (NR_IRQS_LEGACY + 23)
+#define MX3x_INT_KPP (NR_IRQS_LEGACY + 24)
+#define MX3x_INT_RTC (NR_IRQS_LEGACY + 25)
+#define MX3x_INT_PWM (NR_IRQS_LEGACY + 26)
+#define MX3x_INT_EPIT2 (NR_IRQS_LEGACY + 27)
+#define MX3x_INT_EPIT1 (NR_IRQS_LEGACY + 28)
+#define MX3x_INT_GPT (NR_IRQS_LEGACY + 29)
+#define MX3x_INT_POWER_FAIL (NR_IRQS_LEGACY + 30)
+#define MX3x_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX3x_INT_NANDFC (NR_IRQS_LEGACY + 33)
+#define MX3x_INT_SDMA (NR_IRQS_LEGACY + 34)
+#define MX3x_INT_MSHC1 (NR_IRQS_LEGACY + 39)
+#define MX3x_INT_IPU_ERR (NR_IRQS_LEGACY + 41)
+#define MX3x_INT_IPU_SYN (NR_IRQS_LEGACY + 42)
+#define MX3x_INT_UART1 (NR_IRQS_LEGACY + 45)
+#define MX3x_INT_ECT (NR_IRQS_LEGACY + 48)
+#define MX3x_INT_SCC_SCM (NR_IRQS_LEGACY + 49)
+#define MX3x_INT_SCC_SMN (NR_IRQS_LEGACY + 50)
+#define MX3x_INT_GPIO2 (NR_IRQS_LEGACY + 51)
+#define MX3x_INT_GPIO1 (NR_IRQS_LEGACY + 52)
+#define MX3x_INT_WDOG (NR_IRQS_LEGACY + 55)
+#define MX3x_INT_GPIO3 (NR_IRQS_LEGACY + 56)
+#define MX3x_INT_EXT_POWER (NR_IRQS_LEGACY + 58)
+#define MX3x_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59)
+#define MX3x_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60)
+#define MX3x_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61)
+#define MX3x_INT_EXT_WDOG (NR_IRQS_LEGACY + 62)
+#define MX3x_INT_EXT_TV (NR_IRQS_LEGACY + 63)
+
+#define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */
+
+/* Mandatory defines used globally */
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+extern int mx35_revision(void);
+extern int mx31_revision(void);
+#endif
+
+#endif /* ifndef __MACH_MX3x_H__ */
diff --git a/arch/arm/mach-imx/include/mach/mx50.h b/arch/arm/mach-imx/include/mach/mx50.h
new file mode 100644
index 0000000..09ac19c
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx50.h
@@ -0,0 +1,290 @@
+#ifndef __MACH_MX50_H__
+#define __MACH_MX50_H__
+
+/*
+ * IROM
+ */
+#define MX50_IROM_BASE_ADDR 0x0
+#define MX50_IROM_SIZE SZ_64K
+
+/* TZIC */
+#define MX50_TZIC_BASE_ADDR 0x0fffc000
+#define MX50_TZIC_SIZE SZ_16K
+
+/*
+ * IRAM
+ */
+#define MX50_IRAM_BASE_ADDR 0xf8000000 /* internal ram */
+#define MX50_IRAM_PARTITIONS 16
+#define MX50_IRAM_SIZE (MX50_IRAM_PARTITIONS * SZ_8K) /* 128KB */
+
+/*
+ * Databahn
+ */
+#define MX50_DATABAHN_BASE_ADDR 0x14000000
+
+/*
+ * Graphics Memory of GPU
+ */
+#define MX50_GPU2D_BASE_ADDR 0x20000000
+
+#define MX50_DEBUG_BASE_ADDR 0x40000000
+#define MX50_DEBUG_SIZE SZ_1M
+#define MX50_ETB_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00001000)
+#define MX50_ETM_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00002000)
+#define MX50_TPIU_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00003000)
+#define MX50_CTI0_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00004000)
+#define MX50_CTI1_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00005000)
+#define MX50_CTI2_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00006000)
+#define MX50_CTI3_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00007000)
+#define MX50_CORTEX_DBG_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x00008000)
+
+#define MX50_APBHDMA_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01000000)
+#define MX50_OCOTP_CTRL_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01002000)
+#define MX50_DIGCTL_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01004000)
+#define MX50_GPMI_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01006000)
+#define MX50_BCH_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01008000)
+#define MX50_ELCDIF_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100a000)
+#define MX50_EPXP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100c000)
+#define MX50_DCP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x0100e000)
+#define MX50_EPDC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01010000)
+#define MX50_QOSC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01012000)
+#define MX50_PERFMON_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01014000)
+#define MX50_SSP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01016000)
+#define MX50_ANATOP_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x01018000)
+#define MX50_NIC_BASE_ADDR (MX50_DEBUG_BASE_ADDR + 0x08000000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX50_SPBA0_BASE_ADDR 0x50000000
+#define MX50_SPBA0_SIZE SZ_1M
+
+#define MX50_MMC_SDHC1_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00004000)
+#define MX50_MMC_SDHC2_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00008000)
+#define MX50_UART3_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x0000c000)
+#define MX50_CSPI1_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00010000)
+#define MX50_SSI2_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00014000)
+#define MX50_MMC_SDHC3_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00020000)
+#define MX50_MMC_SDHC4_BASE_ADDR (MX50_SPBA0_BASE_ADDR + 0x00024000)
+
+/*
+ * AIPS 1
+ */
+#define MX50_AIPS1_BASE_ADDR 0x53f00000
+#define MX50_AIPS1_SIZE SZ_1M
+
+#define MX50_OTG_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00080000)
+#define MX50_GPIO1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00084000)
+#define MX50_GPIO2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00088000)
+#define MX50_GPIO3_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x0008c000)
+#define MX50_GPIO4_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00090000)
+#define MX50_KPP_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00094000)
+#define MX50_WDOG_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x00098000)
+#define MX50_GPT1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a0000)
+#define MX50_SRTC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a4000)
+#define MX50_IOMUXC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000a8000)
+#define MX50_EPIT1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000ac000)
+#define MX50_PWM1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000b4000)
+#define MX50_PWM2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000b8000)
+#define MX50_UART1_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000bc000)
+#define MX50_UART2_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000c0000)
+#define MX50_SRC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d0000)
+#define MX50_CCM_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d4000)
+#define MX50_GPC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000d8000)
+#define MX50_GPIO5_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000dc000)
+#define MX50_GPIO6_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000e0000)
+#define MX50_I2C3_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000ec000)
+#define MX50_UART4_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f0000)
+
+#define MX50_MSHC_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f4000)
+#define MX50_RNGB_BASE_ADDR (MX50_AIPS1_BASE_ADDR + 0x000f8000)
+
+/*
+ * AIPS 2
+ */
+#define MX50_AIPS2_BASE_ADDR 0x63f00000
+#define MX50_AIPS2_SIZE SZ_1M
+
+#define MX50_PLL1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00080000)
+#define MX50_PLL2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00084000)
+#define MX50_PLL3_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00088000)
+#define MX50_UART5_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00090000)
+#define MX50_AHBMAX_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x00094000)
+#define MX50_ARM_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000a0000)
+#define MX50_OWIRE_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000a4000)
+#define MX50_CSPI2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000ac000)
+#define MX50_SDMA_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000b0000)
+#define MX50_ROMCP_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000b8000)
+#define MX50_CSPI3_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c0000)
+#define MX50_I2C2_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c4000)
+#define MX50_I2C1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000c8000)
+#define MX50_SSI1_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000cc000)
+#define MX50_AUDMUX_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000d0000)
+#define MX50_WEIM_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000d8000)
+#define MX50_FEC_BASE_ADDR (MX50_AIPS2_BASE_ADDR + 0x000ec000)
+
+/*
+ * Memory regions and CS
+ */
+#define MX50_CSD0_BASE_ADDR 0x70000000
+#define MX50_CSD1_BASE_ADDR 0xb0000000
+#define MX50_CS0_BASE_ADDR 0xf0000000
+
+#define MX50_IO_P2V(x) IMX_IO_P2V(x)
+#define MX50_IO_ADDRESS(x) IOMEM(MX50_IO_P2V(x))
+
+/*
+ * defines for SPBA modules
+ */
+#define MX50_SPBA_SDHC1 0x04
+#define MX50_SPBA_SDHC2 0x08
+#define MX50_SPBA_UART3 0x0c
+#define MX50_SPBA_CSPI1 0x10
+#define MX50_SPBA_SSI2 0x14
+#define MX50_SPBA_SDHC3 0x20
+#define MX50_SPBA_SDHC4 0x24
+#define MX50_SPBA_SPDIF 0x28
+#define MX50_SPBA_ATA 0x30
+#define MX50_SPBA_SLIM 0x34
+#define MX50_SPBA_HSI2C 0x38
+#define MX50_SPBA_CTRL 0x3c
+
+/*
+ * DMA request assignments
+ */
+#define MX50_DMA_REQ_GPC 1
+#define MX50_DMA_REQ_ATA_UART4_RX 2
+#define MX50_DMA_REQ_ATA_UART4_TX 3
+#define MX50_DMA_REQ_CSPI1_RX 6
+#define MX50_DMA_REQ_CSPI1_TX 7
+#define MX50_DMA_REQ_CSPI2_RX 8
+#define MX50_DMA_REQ_CSPI2_TX 9
+#define MX50_DMA_REQ_I2C3_SDHC3 10
+#define MX50_DMA_REQ_SDHC4 11
+#define MX50_DMA_REQ_UART2_FIRI_RX 12
+#define MX50_DMA_REQ_UART2_FIRI_TX 13
+#define MX50_DMA_REQ_EXT0 14
+#define MX50_DMA_REQ_EXT1 15
+#define MX50_DMA_REQ_UART5_RX 16
+#define MX50_DMA_REQ_UART5_TX 17
+#define MX50_DMA_REQ_UART1_RX 18
+#define MX50_DMA_REQ_UART1_TX 19
+#define MX50_DMA_REQ_I2C1_SDHC1 20
+#define MX50_DMA_REQ_I2C2_SDHC2 21
+#define MX50_DMA_REQ_SSI2_RX2 22
+#define MX50_DMA_REQ_SSI2_TX2 23
+#define MX50_DMA_REQ_SSI2_RX1 24
+#define MX50_DMA_REQ_SSI2_TX1 25
+#define MX50_DMA_REQ_SSI1_RX2 26
+#define MX50_DMA_REQ_SSI1_TX2 27
+#define MX50_DMA_REQ_SSI1_RX1 28
+#define MX50_DMA_REQ_SSI1_TX1 29
+#define MX50_DMA_REQ_CSPI_RX 38
+#define MX50_DMA_REQ_CSPI_TX 39
+#define MX50_DMA_REQ_UART3_RX 42
+#define MX50_DMA_REQ_UART3_TX 43
+
+/*
+ * Interrupt numbers
+ */
+#include <asm/irq.h>
+#define MX50_INT_MMC_SDHC1 (NR_IRQS_LEGACY + 1)
+#define MX50_INT_MMC_SDHC2 (NR_IRQS_LEGACY + 2)
+#define MX50_INT_MMC_SDHC3 (NR_IRQS_LEGACY + 3)
+#define MX50_INT_MMC_SDHC4 (NR_IRQS_LEGACY + 4)
+#define MX50_INT_DAP (NR_IRQS_LEGACY + 5)
+#define MX50_INT_SDMA (NR_IRQS_LEGACY + 6)
+#define MX50_INT_IOMUX (NR_IRQS_LEGACY + 7)
+#define MX50_INT_UART4 (NR_IRQS_LEGACY + 13)
+#define MX50_INT_USB_H1 (NR_IRQS_LEGACY + 14)
+#define MX50_INT_USB_OTG (NR_IRQS_LEGACY + 18)
+#define MX50_INT_DATABAHN (NR_IRQS_LEGACY + 19)
+#define MX50_INT_ELCDIF (NR_IRQS_LEGACY + 20)
+#define MX50_INT_EPXP (NR_IRQS_LEGACY + 21)
+#define MX50_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
+#define MX50_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
+#define MX50_INT_EPDC (NR_IRQS_LEGACY + 27)
+#define MX50_INT_NIC (NR_IRQS_LEGACY + 28)
+#define MX50_INT_SSI1 (NR_IRQS_LEGACY + 29)
+#define MX50_INT_SSI2 (NR_IRQS_LEGACY + 30)
+#define MX50_INT_UART1 (NR_IRQS_LEGACY + 31)
+#define MX50_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX50_INT_UART3 (NR_IRQS_LEGACY + 33)
+#define MX50_INT_RESV34 (NR_IRQS_LEGACY + 34)
+#define MX50_INT_RESV35 (NR_IRQS_LEGACY + 35)
+#define MX50_INT_CSPI1 (NR_IRQS_LEGACY + 36)
+#define MX50_INT_CSPI2 (NR_IRQS_LEGACY + 37)
+#define MX50_INT_CSPI (NR_IRQS_LEGACY + 38)
+#define MX50_INT_GPT (NR_IRQS_LEGACY + 39)
+#define MX50_INT_EPIT1 (NR_IRQS_LEGACY + 40)
+#define MX50_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
+#define MX50_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
+#define MX50_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
+#define MX50_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
+#define MX50_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
+#define MX50_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
+#define MX50_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
+#define MX50_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
+#define MX50_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
+#define MX50_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
+#define MX50_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
+#define MX50_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
+#define MX50_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
+#define MX50_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
+#define MX50_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
+#define MX50_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
+#define MX50_INT_WDOG1 (NR_IRQS_LEGACY + 58)
+#define MX50_INT_KPP (NR_IRQS_LEGACY + 60)
+#define MX50_INT_PWM1 (NR_IRQS_LEGACY + 61)
+#define MX50_INT_I2C1 (NR_IRQS_LEGACY + 62)
+#define MX50_INT_I2C2 (NR_IRQS_LEGACY + 63)
+#define MX50_INT_I2C3 (NR_IRQS_LEGACY + 64)
+#define MX50_INT_RESV65 (NR_IRQS_LEGACY + 65)
+#define MX50_INT_DCDC (NR_IRQS_LEGACY + 66)
+#define MX50_INT_THERMAL_ALARM (NR_IRQS_LEGACY + 67)
+#define MX50_INT_ANA3 (NR_IRQS_LEGACY + 68)
+#define MX50_INT_ANA4 (NR_IRQS_LEGACY + 69)
+#define MX50_INT_CCM1 (NR_IRQS_LEGACY + 71)
+#define MX50_INT_CCM2 (NR_IRQS_LEGACY + 72)
+#define MX50_INT_GPC1 (NR_IRQS_LEGACY + 73)
+#define MX50_INT_GPC2 (NR_IRQS_LEGACY + 74)
+#define MX50_INT_SRC (NR_IRQS_LEGACY + 75)
+#define MX50_INT_NM (NR_IRQS_LEGACY + 76)
+#define MX50_INT_PMU (NR_IRQS_LEGACY + 77)
+#define MX50_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
+#define MX50_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
+#define MX50_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
+#define MX50_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
+#define MX50_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
+#define MX50_INT_UART5 (NR_IRQS_LEGACY + 86)
+#define MX50_INT_FEC (NR_IRQS_LEGACY + 87)
+#define MX50_INT_OWIRE (NR_IRQS_LEGACY + 88)
+#define MX50_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
+#define MX50_INT_SJC (NR_IRQS_LEGACY + 90)
+#define MX50_INT_DCP_CHAN1_3 (NR_IRQS_LEGACY + 91)
+#define MX50_INT_DCP_CHAN0 (NR_IRQS_LEGACY + 92)
+#define MX50_INT_PWM2 (NR_IRQS_LEGACY + 94)
+#define MX50_INT_RNGB (NR_IRQS_LEGACY + 97)
+#define MX50_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
+#define MX50_INT_RAWNAND_BCH (NR_IRQS_LEGACY + 100)
+#define MX50_INT_RAWNAND_GPMI (NR_IRQS_LEGACY + 102)
+#define MX50_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103)
+#define MX50_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104)
+#define MX50_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105)
+#define MX50_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106)
+#define MX50_INT_MSHC (NR_IRQS_LEGACY + 109)
+#define MX50_INT_APBHDMA_CHAN0 (NR_IRQS_LEGACY + 110)
+#define MX50_INT_APBHDMA_CHAN1 (NR_IRQS_LEGACY + 111)
+#define MX50_INT_APBHDMA_CHAN2 (NR_IRQS_LEGACY + 112)
+#define MX50_INT_APBHDMA_CHAN3 (NR_IRQS_LEGACY + 113)
+#define MX50_INT_APBHDMA_CHAN4 (NR_IRQS_LEGACY + 114)
+#define MX50_INT_APBHDMA_CHAN5 (NR_IRQS_LEGACY + 115)
+#define MX50_INT_APBHDMA_CHAN6 (NR_IRQS_LEGACY + 116)
+#define MX50_INT_APBHDMA_CHAN7 (NR_IRQS_LEGACY + 117)
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+extern int mx50_revision(void);
+#endif
+
+#endif /* ifndef __MACH_MX50_H__ */
diff --git a/arch/arm/mach-imx/include/mach/mx51.h b/arch/arm/mach-imx/include/mach/mx51.h
new file mode 100644
index 0000000..af844f7
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx51.h
@@ -0,0 +1,346 @@
+#ifndef __MACH_MX51_H__
+#define __MACH_MX51_H__
+
+/*
+ * IROM
+ */
+#define MX51_IROM_BASE_ADDR 0x0
+#define MX51_IROM_SIZE SZ_64K
+
+/*
+ * IRAM
+ */
+#define MX51_IRAM_BASE_ADDR 0x1ffe0000 /* internal ram */
+#define MX51_IRAM_PARTITIONS 16
+#define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */
+
+#define MX51_GPU_BASE_ADDR 0x20000000
+#define MX51_GPU_CTRL_BASE_ADDR 0x30000000
+#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX51_SPBA0_BASE_ADDR 0x70000000
+#define MX51_SPBA0_SIZE SZ_1M
+
+#define MX51_ESDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x04000)
+#define MX51_ESDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x08000)
+#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0c000)
+#define MX51_ECSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x10000)
+#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x14000)
+#define MX51_ESDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x20000)
+#define MX51_ESDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x24000)
+#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x28000)
+#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x30000)
+#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x34000)
+#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x38000)
+#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x3c000)
+
+/*
+ * AIPS 1
+ */
+#define MX51_AIPS1_BASE_ADDR 0x73f00000
+#define MX51_AIPS1_SIZE SZ_1M
+
+#define MX51_USB_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000)
+#define MX51_USB_OTG_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0000)
+#define MX51_USB_HS1_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0200)
+#define MX51_USB_HS2_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0400)
+#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x84000)
+#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x88000)
+#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000)
+#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x90000)
+#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x94000)
+#define MX51_WDOG1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x98000)
+#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x9c000)
+#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa0000)
+#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa4000)
+#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa8000)
+#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xac000)
+#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb0000)
+#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb4000)
+#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb8000)
+#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xbc000)
+#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xc0000)
+#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd0000)
+#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd4000)
+#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd8000)
+
+/*
+ * AIPS 2
+ */
+#define MX51_AIPS2_BASE_ADDR 0x83f00000
+#define MX51_AIPS2_SIZE SZ_1M
+
+#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x80000)
+#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x84000)
+#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x88000)
+#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x94000)
+#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x98000)
+#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x9c000)
+#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa0000)
+#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa4000)
+#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa8000)
+#define MX51_ECSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xac000)
+#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb0000)
+#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb4000)
+#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb8000)
+#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xbc000)
+#define MX51_CSPI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc0000)
+#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc4000)
+#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc8000)
+#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xcc000)
+#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd0000)
+#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd8000)
+#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd9000)
+#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xda000)
+#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdb000)
+#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdbf00)
+#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdc000)
+#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe0000)
+#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe4000)
+#define MX51_SSI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe8000)
+#define MX51_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xec000)
+#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf0000)
+#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf4000)
+#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf8000)
+
+#define MX51_CSD0_BASE_ADDR 0x90000000
+#define MX51_CSD1_BASE_ADDR 0xa0000000
+#define MX51_CS0_BASE_ADDR 0xb0000000
+#define MX51_CS1_BASE_ADDR 0xb8000000
+#define MX51_CS2_BASE_ADDR 0xc0000000
+#define MX51_CS3_BASE_ADDR 0xc8000000
+#define MX51_CS4_BASE_ADDR 0xcc000000
+#define MX51_CS5_BASE_ADDR 0xce000000
+
+/*
+ * NFC
+ */
+#define MX51_NFC_AXI_BASE_ADDR 0xcfff0000 /* NAND flash AXI */
+#define MX51_NFC_AXI_SIZE SZ_64K
+
+#define MX51_GPU2D_BASE_ADDR 0xd0000000
+#define MX51_TZIC_BASE_ADDR 0xe0000000
+#define MX51_TZIC_SIZE SZ_16K
+
+#define MX51_IO_P2V(x) IMX_IO_P2V(x)
+#define MX51_IO_ADDRESS(x) IOMEM(MX51_IO_P2V(x))
+
+/*
+ * defines for SPBA modules
+ */
+#define MX51_SPBA_SDHC1 0x04
+#define MX51_SPBA_SDHC2 0x08
+#define MX51_SPBA_UART3 0x0c
+#define MX51_SPBA_CSPI1 0x10
+#define MX51_SPBA_SSI2 0x14
+#define MX51_SPBA_SDHC3 0x20
+#define MX51_SPBA_SDHC4 0x24
+#define MX51_SPBA_SPDIF 0x28
+#define MX51_SPBA_ATA 0x30
+#define MX51_SPBA_SLIM 0x34
+#define MX51_SPBA_HSI2C 0x38
+#define MX51_SPBA_CTRL 0x3c
+
+/*
+ * Defines for modules using static and dynamic DMA channels
+ */
+#define MX51_MXC_DMA_CHANNEL_IRAM 30
+#define MX51_MXC_DMA_CHANNEL_SPDIF_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART1_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART1_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART2_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART2_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART3_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART3_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MMC1 MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MMC2 MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI1_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI1_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI2_RX MXC_DMA_DYNAMIC_CHANNEL
+#ifdef CONFIG_SDMA_IRAM
+#define MX51_MXC_DMA_CHANNEL_SSI2_TX (MX51_MXC_DMA_CHANNEL_IRAM + 1)
+#else /*CONFIG_SDMA_IRAM */
+#define MX51_MXC_DMA_CHANNEL_SSI2_TX MXC_DMA_DYNAMIC_CHANNEL
+#endif /*CONFIG_SDMA_IRAM */
+#define MX51_MXC_DMA_CHANNEL_CSPI1_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI1_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI2_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI2_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI3_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI3_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_ATA_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL
+
+#define MX51_IS_MEM_DEVICE_NONSHARED(x) 0
+
+/*
+ * DMA request assignments
+ */
+#define MX51_DMA_REQ_VPU 0
+#define MX51_DMA_REQ_GPC 1
+#define MX51_DMA_REQ_ATA_RX 2
+#define MX51_DMA_REQ_ATA_TX 3
+#define MX51_DMA_REQ_ATA_TX_END 4
+#define MX51_DMA_REQ_SLIM_B 5
+#define MX51_DMA_REQ_CSPI1_RX 6
+#define MX51_DMA_REQ_CSPI1_TX 7
+#define MX51_DMA_REQ_CSPI2_RX 8
+#define MX51_DMA_REQ_CSPI2_TX 9
+#define MX51_DMA_REQ_HS_I2C_TX 10
+#define MX51_DMA_REQ_HS_I2C_RX 11
+#define MX51_DMA_REQ_FIRI_RX 12
+#define MX51_DMA_REQ_FIRI_TX 13
+#define MX51_DMA_REQ_EXTREQ1 14
+#define MX51_DMA_REQ_GPU 15
+#define MX51_DMA_REQ_UART2_RX 16
+#define MX51_DMA_REQ_UART2_TX 17
+#define MX51_DMA_REQ_UART1_RX 18
+#define MX51_DMA_REQ_UART1_TX 19
+#define MX51_DMA_REQ_SDHC1 20
+#define MX51_DMA_REQ_SDHC2 21
+#define MX51_DMA_REQ_SSI2_RX1 22
+#define MX51_DMA_REQ_SSI2_TX1 23
+#define MX51_DMA_REQ_SSI2_RX0 24
+#define MX51_DMA_REQ_SSI2_TX0 25
+#define MX51_DMA_REQ_SSI1_RX1 26
+#define MX51_DMA_REQ_SSI1_TX1 27
+#define MX51_DMA_REQ_SSI1_RX0 28
+#define MX51_DMA_REQ_SSI1_TX0 29
+#define MX51_DMA_REQ_EMI_RD 30
+#define MX51_DMA_REQ_CTI2_0 31
+#define MX51_DMA_REQ_EMI_WR 32
+#define MX51_DMA_REQ_CTI2_1 33
+#define MX51_DMA_REQ_EPIT2 34
+#define MX51_DMA_REQ_SSI3_RX1 35
+#define MX51_DMA_REQ_IPU 36
+#define MX51_DMA_REQ_SSI3_TX1 37
+#define MX51_DMA_REQ_CSPI_RX 38
+#define MX51_DMA_REQ_CSPI_TX 39
+#define MX51_DMA_REQ_SDHC3 40
+#define MX51_DMA_REQ_SDHC4 41
+#define MX51_DMA_REQ_SLIM_B_TX 42
+#define MX51_DMA_REQ_UART3_RX 43
+#define MX51_DMA_REQ_UART3_TX 44
+#define MX51_DMA_REQ_SPDIF 45
+#define MX51_DMA_REQ_SSI3_RX0 46
+#define MX51_DMA_REQ_SSI3_TX0 47
+
+/*
+ * Interrupt numbers
+ */
+#include <asm/irq.h>
+#define MX51_INT_BASE (NR_IRQS_LEGACY + 0)
+#define MX51_INT_RESV0 (NR_IRQS_LEGACY + 0)
+#define MX51_INT_ESDHC1 (NR_IRQS_LEGACY + 1)
+#define MX51_INT_ESDHC2 (NR_IRQS_LEGACY + 2)
+#define MX51_INT_ESDHC3 (NR_IRQS_LEGACY + 3)
+#define MX51_INT_ESDHC4 (NR_IRQS_LEGACY + 4)
+#define MX51_INT_RESV5 (NR_IRQS_LEGACY + 5)
+#define MX51_INT_SDMA (NR_IRQS_LEGACY + 6)
+#define MX51_INT_IOMUX (NR_IRQS_LEGACY + 7)
+#define MX51_INT_NFC (NR_IRQS_LEGACY + 8)
+#define MX51_INT_VPU (NR_IRQS_LEGACY + 9)
+#define MX51_INT_IPU_ERR (NR_IRQS_LEGACY + 10)
+#define MX51_INT_IPU_SYN (NR_IRQS_LEGACY + 11)
+#define MX51_INT_GPU (NR_IRQS_LEGACY + 12)
+#define MX51_INT_RESV13 (NR_IRQS_LEGACY + 13)
+#define MX51_INT_USB_HS1 (NR_IRQS_LEGACY + 14)
+#define MX51_INT_EMI (NR_IRQS_LEGACY + 15)
+#define MX51_INT_USB_HS2 (NR_IRQS_LEGACY + 16)
+#define MX51_INT_USB_HS3 (NR_IRQS_LEGACY + 17)
+#define MX51_INT_USB_OTG (NR_IRQS_LEGACY + 18)
+#define MX51_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19)
+#define MX51_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20)
+#define MX51_INT_SCC_SMN (NR_IRQS_LEGACY + 21)
+#define MX51_INT_SCC_STZ (NR_IRQS_LEGACY + 22)
+#define MX51_INT_SCC_SCM (NR_IRQS_LEGACY + 23)
+#define MX51_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
+#define MX51_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
+#define MX51_INT_RTIC (NR_IRQS_LEGACY + 26)
+#define MX51_INT_CSU (NR_IRQS_LEGACY + 27)
+#define MX51_INT_SLIM_B (NR_IRQS_LEGACY + 28)
+#define MX51_INT_SSI1 (NR_IRQS_LEGACY + 29)
+#define MX51_INT_SSI2 (NR_IRQS_LEGACY + 30)
+#define MX51_INT_UART1 (NR_IRQS_LEGACY + 31)
+#define MX51_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX51_INT_UART3 (NR_IRQS_LEGACY + 33)
+#define MX51_INT_RESV34 (NR_IRQS_LEGACY + 34)
+#define MX51_INT_RESV35 (NR_IRQS_LEGACY + 35)
+#define MX51_INT_ECSPI1 (NR_IRQS_LEGACY + 36)
+#define MX51_INT_ECSPI2 (NR_IRQS_LEGACY + 37)
+#define MX51_INT_CSPI (NR_IRQS_LEGACY + 38)
+#define MX51_INT_GPT (NR_IRQS_LEGACY + 39)
+#define MX51_INT_EPIT1 (NR_IRQS_LEGACY + 40)
+#define MX51_INT_EPIT2 (NR_IRQS_LEGACY + 41)
+#define MX51_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
+#define MX51_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
+#define MX51_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
+#define MX51_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
+#define MX51_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
+#define MX51_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
+#define MX51_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
+#define MX51_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
+#define MX51_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
+#define MX51_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
+#define MX51_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
+#define MX51_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
+#define MX51_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
+#define MX51_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
+#define MX51_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
+#define MX51_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
+#define MX51_INT_WDOG1 (NR_IRQS_LEGACY + 58)
+#define MX51_INT_WDOG2 (NR_IRQS_LEGACY + 59)
+#define MX51_INT_KPP (NR_IRQS_LEGACY + 60)
+#define MX51_INT_PWM1 (NR_IRQS_LEGACY + 61)
+#define MX51_INT_I2C1 (NR_IRQS_LEGACY + 62)
+#define MX51_INT_I2C2 (NR_IRQS_LEGACY + 63)
+#define MX51_INT_HS_I2C (NR_IRQS_LEGACY + 64)
+#define MX51_INT_RESV65 (NR_IRQS_LEGACY + 65)
+#define MX51_INT_RESV66 (NR_IRQS_LEGACY + 66)
+#define MX51_INT_SIM_IPB (NR_IRQS_LEGACY + 67)
+#define MX51_INT_SIM_DAT (NR_IRQS_LEGACY + 68)
+#define MX51_INT_IIM (NR_IRQS_LEGACY + 69)
+#define MX51_INT_ATA (NR_IRQS_LEGACY + 70)
+#define MX51_INT_CCM1 (NR_IRQS_LEGACY + 71)
+#define MX51_INT_CCM2 (NR_IRQS_LEGACY + 72)
+#define MX51_INT_GPC1 (NR_IRQS_LEGACY + 73)
+#define MX51_INT_GPC2 (NR_IRQS_LEGACY + 74)
+#define MX51_INT_SRC (NR_IRQS_LEGACY + 75)
+#define MX51_INT_NM (NR_IRQS_LEGACY + 76)
+#define MX51_INT_PMU (NR_IRQS_LEGACY + 77)
+#define MX51_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
+#define MX51_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
+#define MX51_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
+#define MX51_INT_MCG_ERR (NR_IRQS_LEGACY + 81)
+#define MX51_INT_MCG_TMR (NR_IRQS_LEGACY + 82)
+#define MX51_INT_MCG_FUNC (NR_IRQS_LEGACY + 83)
+#define MX51_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
+#define MX51_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
+#define MX51_INT_RESV86 (NR_IRQS_LEGACY + 86)
+#define MX51_INT_FEC (NR_IRQS_LEGACY + 87)
+#define MX51_INT_OWIRE (NR_IRQS_LEGACY + 88)
+#define MX51_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
+#define MX51_INT_SJC (NR_IRQS_LEGACY + 90)
+#define MX51_INT_SPDIF (NR_IRQS_LEGACY + 91)
+#define MX51_INT_TVE (NR_IRQS_LEGACY + 92)
+#define MX51_INT_FIRI (NR_IRQS_LEGACY + 93)
+#define MX51_INT_PWM2 (NR_IRQS_LEGACY + 94)
+#define MX51_INT_SLIM_EXP (NR_IRQS_LEGACY + 95)
+#define MX51_INT_SSI3 (NR_IRQS_LEGACY + 96)
+#define MX51_INT_EMI_BOOT (NR_IRQS_LEGACY + 97)
+#define MX51_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
+#define MX51_INT_SMC_RX (NR_IRQS_LEGACY + 99)
+#define MX51_INT_VPU_IDLE (NR_IRQS_LEGACY + 100)
+#define MX51_INT_EMI_NFC (NR_IRQS_LEGACY + 101)
+#define MX51_INT_GPU_IDLE (NR_IRQS_LEGACY + 102)
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+extern int mx51_revision(void);
+extern void mx51_display_revision(void);
+#endif
+
+#endif /* ifndef __MACH_MX51_H__ */
diff --git a/arch/arm/mach-imx/include/mach/mx53.h b/arch/arm/mach-imx/include/mach/mx53.h
new file mode 100644
index 0000000..f829d1c
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx53.h
@@ -0,0 +1,342 @@
+#ifndef __MACH_MX53_H__
+#define __MACH_MX53_H__
+
+/*
+ * IROM
+ */
+#define MX53_IROM_BASE_ADDR 0x0
+#define MX53_IROM_SIZE SZ_64K
+
+/* TZIC */
+#define MX53_TZIC_BASE_ADDR 0x0FFFC000
+#define MX53_TZIC_SIZE SZ_16K
+
+/*
+ * AHCI SATA
+ */
+#define MX53_SATA_BASE_ADDR 0x10000000
+
+/*
+ * NFC
+ */
+#define MX53_NFC_AXI_BASE_ADDR 0xF7FF0000 /* NAND flash AXI */
+#define MX53_NFC_AXI_SIZE SZ_64K
+
+/*
+ * IRAM
+ */
+#define MX53_IRAM_BASE_ADDR 0xF8000000 /* internal ram */
+#define MX53_IRAM_PARTITIONS 16
+#define MX53_IRAM_SIZE (MX53_IRAM_PARTITIONS * SZ_8K) /* 128KB */
+
+/*
+ * Graphics Memory of GPU
+ */
+#define MX53_IPU_CTRL_BASE_ADDR 0x18000000
+#define MX53_GPU2D_BASE_ADDR 0x20000000
+#define MX53_GPU_BASE_ADDR 0x30000000
+#define MX53_GPU_GMEM_BASE_ADDR 0xF8020000
+
+#define MX53_DEBUG_BASE_ADDR 0x40000000
+#define MX53_DEBUG_SIZE SZ_1M
+#define MX53_ETB_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00001000)
+#define MX53_ETM_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00002000)
+#define MX53_TPIU_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00003000)
+#define MX53_CTI0_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00004000)
+#define MX53_CTI1_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00005000)
+#define MX53_CTI2_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00006000)
+#define MX53_CTI3_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00007000)
+#define MX53_CORTEX_DBG_BASE_ADDR (MX53_DEBUG_BASE_ADDR + 0x00008000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX53_SPBA0_BASE_ADDR 0x50000000
+#define MX53_SPBA0_SIZE SZ_1M
+
+#define MX53_ESDHC1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00004000)
+#define MX53_ESDHC2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00008000)
+#define MX53_UART3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0000C000)
+#define MX53_ECSPI1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00010000)
+#define MX53_SSI2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00014000)
+#define MX53_ESDHC3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00020000)
+#define MX53_ESDHC4_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00024000)
+#define MX53_SPDIF_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00028000)
+#define MX53_ASRC_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0002C000)
+#define MX53_ATA_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00030000)
+#define MX53_SLIM_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00034000)
+#define MX53_HSI2C_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00038000)
+#define MX53_SPBA_CTRL_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * AIPS 1
+ */
+#define MX53_AIPS1_BASE_ADDR 0x53F00000
+#define MX53_AIPS1_SIZE SZ_1M
+
+#define MX53_OTG_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00080000)
+#define MX53_GPIO1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00084000)
+#define MX53_GPIO2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00088000)
+#define MX53_GPIO3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0008C000)
+#define MX53_GPIO4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00090000)
+#define MX53_KPP_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00094000)
+#define MX53_WDOG1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00098000)
+#define MX53_WDOG2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0009C000)
+#define MX53_GPT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A0000)
+#define MX53_SRTC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A4000)
+#define MX53_IOMUXC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A8000)
+#define MX53_EPIT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000AC000)
+#define MX53_EPIT2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B0000)
+#define MX53_PWM1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B4000)
+#define MX53_PWM2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B8000)
+#define MX53_UART1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000BC000)
+#define MX53_UART2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000C0000)
+#define MX53_SRC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D0000)
+#define MX53_CCM_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D4000)
+#define MX53_GPC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D8000)
+#define MX53_GPIO5_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000DC000)
+#define MX53_GPIO6_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E0000)
+#define MX53_GPIO7_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E4000)
+#define MX53_ATA_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E8000)
+#define MX53_I2C3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000EC000)
+#define MX53_UART4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000F0000)
+
+/*
+ * AIPS 2
+ */
+#define MX53_AIPS2_BASE_ADDR 0x63F00000
+#define MX53_AIPS2_SIZE SZ_1M
+
+#define MX53_PLL1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00080000)
+#define MX53_PLL2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00084000)
+#define MX53_PLL3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00088000)
+#define MX53_PLL4_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0008C000)
+#define MX53_UART5_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00090000)
+#define MX53_AHBMAX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00094000)
+#define MX53_IIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00098000)
+#define MX53_CSU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0009C000)
+#define MX53_ARM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A0000)
+#define MX53_OWIRE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A4000)
+#define MX53_FIRI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A8000)
+#define MX53_ECSPI2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000AC000)
+#define MX53_SDMA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B0000)
+#define MX53_SCC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B4000)
+#define MX53_ROMCP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B8000)
+#define MX53_RTIC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000BC000)
+#define MX53_CSPI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C0000)
+#define MX53_I2C2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C4000)
+#define MX53_I2C1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C8000)
+#define MX53_SSI1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000CC000)
+#define MX53_AUDMUX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D0000)
+#define MX53_RTC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D4000)
+#define MX53_M4IF_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D8000)
+#define MX53_ESDCTL_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D9000)
+#define MX53_WEIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DA000)
+#define MX53_NFC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DB000)
+#define MX53_EMI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DBF00)
+#define MX53_MIPI_HSC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DC000)
+#define MX53_MLB_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E4000)
+#define MX53_SSI3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E8000)
+#define MX53_FEC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000EC000)
+#define MX53_TVE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F0000)
+#define MX53_VPU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F4000)
+#define MX53_SAHARA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F8000)
+#define MX53_PTP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000FC000)
+
+/*
+ * Memory regions and CS
+ */
+#define MX53_CSD0_BASE_ADDR 0x70000000
+#define MX53_CSD1_BASE_ADDR 0xB0000000
+#define MX53_CS0_BASE_ADDR 0xF0000000
+#define MX53_CS1_32MB_BASE_ADDR 0xF2000000
+#define MX53_CS1_64MB_BASE_ADDR 0xF4000000
+#define MX53_CS2_64MB_BASE_ADDR 0xF4000000
+#define MX53_CS2_96MB_BASE_ADDR 0xF6000000
+#define MX53_CS3_BASE_ADDR 0xF6000000
+
+#define MX53_IO_P2V(x) IMX_IO_P2V(x)
+#define MX53_IO_ADDRESS(x) IOMEM(MX53_IO_P2V(x))
+
+/*
+ * defines for SPBA modules
+ */
+#define MX53_SPBA_SDHC1 0x04
+#define MX53_SPBA_SDHC2 0x08
+#define MX53_SPBA_UART3 0x0C
+#define MX53_SPBA_CSPI1 0x10
+#define MX53_SPBA_SSI2 0x14
+#define MX53_SPBA_SDHC3 0x20
+#define MX53_SPBA_SDHC4 0x24
+#define MX53_SPBA_SPDIF 0x28
+#define MX53_SPBA_ATA 0x30
+#define MX53_SPBA_SLIM 0x34
+#define MX53_SPBA_HSI2C 0x38
+#define MX53_SPBA_CTRL 0x3C
+
+/*
+ * DMA request assignments
+ */
+#define MX53_DMA_REQ_SSI3_TX0 47
+#define MX53_DMA_REQ_SSI3_RX0 46
+#define MX53_DMA_REQ_SSI3_TX1 45
+#define MX53_DMA_REQ_SSI3_RX1 44
+#define MX53_DMA_REQ_UART3_TX 43
+#define MX53_DMA_REQ_UART3_RX 42
+#define MX53_DMA_REQ_ESAI_TX 41
+#define MX53_DMA_REQ_ESAI_RX 40
+#define MX53_DMA_REQ_CSPI_TX 39
+#define MX53_DMA_REQ_CSPI_RX 38
+#define MX53_DMA_REQ_ASRC_DMA6 37
+#define MX53_DMA_REQ_ASRC_DMA5 36
+#define MX53_DMA_REQ_ASRC_DMA4 35
+#define MX53_DMA_REQ_ASRC_DMA3 34
+#define MX53_DMA_REQ_ASRC_DMA2 33
+#define MX53_DMA_REQ_ASRC_DMA1 32
+#define MX53_DMA_REQ_EMI_WR 31
+#define MX53_DMA_REQ_EMI_RD 30
+#define MX53_DMA_REQ_SSI1_TX0 29
+#define MX53_DMA_REQ_SSI1_RX0 28
+#define MX53_DMA_REQ_SSI1_TX1 27
+#define MX53_DMA_REQ_SSI1_RX1 26
+#define MX53_DMA_REQ_SSI2_TX0 25
+#define MX53_DMA_REQ_SSI2_RX0 24
+#define MX53_DMA_REQ_SSI2_TX1 23
+#define MX53_DMA_REQ_SSI2_RX1 22
+#define MX53_DMA_REQ_I2C2_SDHC2 21
+#define MX53_DMA_REQ_I2C1_SDHC1 20
+#define MX53_DMA_REQ_UART1_TX 19
+#define MX53_DMA_REQ_UART1_RX 18
+#define MX53_DMA_REQ_UART5_TX 17
+#define MX53_DMA_REQ_UART5_RX 16
+#define MX53_DMA_REQ_SPDIF_TX 15
+#define MX53_DMA_REQ_SPDIF_RX 14
+#define MX53_DMA_REQ_UART2_FIRI_TX 13
+#define MX53_DMA_REQ_UART2_FIRI_RX 12
+#define MX53_DMA_REQ_SDHC4 11
+#define MX53_DMA_REQ_I2C3_SDHC3 10
+#define MX53_DMA_REQ_CSPI2_TX 9
+#define MX53_DMA_REQ_CSPI2_RX 8
+#define MX53_DMA_REQ_CSPI1_TX 7
+#define MX53_DMA_REQ_CSPI1_RX 6
+#define MX53_DMA_REQ_IPU 5
+#define MX53_DMA_REQ_ATA_TX_END 4
+#define MX53_DMA_REQ_ATA_UART4_TX 3
+#define MX53_DMA_REQ_ATA_UART4_RX 2
+#define MX53_DMA_REQ_GPC 1
+#define MX53_DMA_REQ_VPU 0
+
+/*
+ * Interrupt numbers
+ */
+#include <asm/irq.h>
+#define MX53_INT_RESV0 (NR_IRQS_LEGACY + 0)
+#define MX53_INT_ESDHC1 (NR_IRQS_LEGACY + 1)
+#define MX53_INT_ESDHC2 (NR_IRQS_LEGACY + 2)
+#define MX53_INT_ESDHC3 (NR_IRQS_LEGACY + 3)
+#define MX53_INT_ESDHC4 (NR_IRQS_LEGACY + 4)
+#define MX53_INT_DAP (NR_IRQS_LEGACY + 5)
+#define MX53_INT_SDMA (NR_IRQS_LEGACY + 6)
+#define MX53_INT_IOMUX (NR_IRQS_LEGACY + 7)
+#define MX53_INT_NFC (NR_IRQS_LEGACY + 8)
+#define MX53_INT_VPU (NR_IRQS_LEGACY + 9)
+#define MX53_INT_IPU_ERR (NR_IRQS_LEGACY + 10)
+#define MX53_INT_IPU_SYN (NR_IRQS_LEGACY + 11)
+#define MX53_INT_GPU (NR_IRQS_LEGACY + 12)
+#define MX53_INT_UART4 (NR_IRQS_LEGACY + 13)
+#define MX53_INT_USB_H1 (NR_IRQS_LEGACY + 14)
+#define MX53_INT_EMI (NR_IRQS_LEGACY + 15)
+#define MX53_INT_USB_H2 (NR_IRQS_LEGACY + 16)
+#define MX53_INT_USB_H3 (NR_IRQS_LEGACY + 17)
+#define MX53_INT_USB_OTG (NR_IRQS_LEGACY + 18)
+#define MX53_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19)
+#define MX53_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20)
+#define MX53_INT_SCC_SMN (NR_IRQS_LEGACY + 21)
+#define MX53_INT_SCC_STZ (NR_IRQS_LEGACY + 22)
+#define MX53_INT_SCC_SCM (NR_IRQS_LEGACY + 23)
+#define MX53_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24)
+#define MX53_INT_SRTC_TZ (NR_IRQS_LEGACY + 25)
+#define MX53_INT_RTIC (NR_IRQS_LEGACY + 26)
+#define MX53_INT_CSU (NR_IRQS_LEGACY + 27)
+#define MX53_INT_SATA (NR_IRQS_LEGACY + 28)
+#define MX53_INT_SSI1 (NR_IRQS_LEGACY + 29)
+#define MX53_INT_SSI2 (NR_IRQS_LEGACY + 30)
+#define MX53_INT_UART1 (NR_IRQS_LEGACY + 31)
+#define MX53_INT_UART2 (NR_IRQS_LEGACY + 32)
+#define MX53_INT_UART3 (NR_IRQS_LEGACY + 33)
+#define MX53_INT_RTC (NR_IRQS_LEGACY + 34)
+#define MX53_INT_PTP (NR_IRQS_LEGACY + 35)
+#define MX53_INT_ECSPI1 (NR_IRQS_LEGACY + 36)
+#define MX53_INT_ECSPI2 (NR_IRQS_LEGACY + 37)
+#define MX53_INT_CSPI (NR_IRQS_LEGACY + 38)
+#define MX53_INT_GPT (NR_IRQS_LEGACY + 39)
+#define MX53_INT_EPIT1 (NR_IRQS_LEGACY + 40)
+#define MX53_INT_EPIT2 (NR_IRQS_LEGACY + 41)
+#define MX53_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42)
+#define MX53_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43)
+#define MX53_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44)
+#define MX53_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45)
+#define MX53_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46)
+#define MX53_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47)
+#define MX53_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48)
+#define MX53_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49)
+#define MX53_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50)
+#define MX53_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51)
+#define MX53_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52)
+#define MX53_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53)
+#define MX53_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54)
+#define MX53_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55)
+#define MX53_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56)
+#define MX53_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57)
+#define MX53_INT_WDOG1 (NR_IRQS_LEGACY + 58)
+#define MX53_INT_WDOG2 (NR_IRQS_LEGACY + 59)
+#define MX53_INT_KPP (NR_IRQS_LEGACY + 60)
+#define MX53_INT_PWM1 (NR_IRQS_LEGACY + 61)
+#define MX53_INT_I2C1 (NR_IRQS_LEGACY + 62)
+#define MX53_INT_I2C2 (NR_IRQS_LEGACY + 63)
+#define MX53_INT_I2C3 (NR_IRQS_LEGACY + 64)
+#define MX53_INT_MLB (NR_IRQS_LEGACY + 65)
+#define MX53_INT_ASRC (NR_IRQS_LEGACY + 66)
+#define MX53_INT_SPDIF (NR_IRQS_LEGACY + 67)
+#define MX53_INT_SIM_DAT (NR_IRQS_LEGACY + 68)
+#define MX53_INT_IIM (NR_IRQS_LEGACY + 69)
+#define MX53_INT_ATA (NR_IRQS_LEGACY + 70)
+#define MX53_INT_CCM1 (NR_IRQS_LEGACY + 71)
+#define MX53_INT_CCM2 (NR_IRQS_LEGACY + 72)
+#define MX53_INT_GPC1 (NR_IRQS_LEGACY + 73)
+#define MX53_INT_GPC2 (NR_IRQS_LEGACY + 74)
+#define MX53_INT_SRC (NR_IRQS_LEGACY + 75)
+#define MX53_INT_NM (NR_IRQS_LEGACY + 76)
+#define MX53_INT_PMU (NR_IRQS_LEGACY + 77)
+#define MX53_INT_CTI_IRQ (NR_IRQS_LEGACY + 78)
+#define MX53_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79)
+#define MX53_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80)
+#define MX53_INT_ESAI (NR_IRQS_LEGACY + 81)
+#define MX53_INT_CAN1 (NR_IRQS_LEGACY + 82)
+#define MX53_INT_CAN2 (NR_IRQS_LEGACY + 83)
+#define MX53_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84)
+#define MX53_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85)
+#define MX53_INT_UART5 (NR_IRQS_LEGACY + 86)
+#define MX53_INT_FEC (NR_IRQS_LEGACY + 87)
+#define MX53_INT_OWIRE (NR_IRQS_LEGACY + 88)
+#define MX53_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89)
+#define MX53_INT_SJC (NR_IRQS_LEGACY + 90)
+#define MX53_INT_TVE (NR_IRQS_LEGACY + 92)
+#define MX53_INT_FIRI (NR_IRQS_LEGACY + 93)
+#define MX53_INT_PWM2 (NR_IRQS_LEGACY + 94)
+#define MX53_INT_SLIM_EXP (NR_IRQS_LEGACY + 95)
+#define MX53_INT_SSI3 (NR_IRQS_LEGACY + 96)
+#define MX53_INT_EMI_BOOT (NR_IRQS_LEGACY + 97)
+#define MX53_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98)
+#define MX53_INT_SMC_RX (NR_IRQS_LEGACY + 99)
+#define MX53_INT_VPU_IDLE (NR_IRQS_LEGACY + 100)
+#define MX53_INT_EMI_NFC (NR_IRQS_LEGACY + 101)
+#define MX53_INT_GPU_IDLE (NR_IRQS_LEGACY + 102)
+#define MX53_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103)
+#define MX53_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104)
+#define MX53_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105)
+#define MX53_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106)
+#define MX53_INT_GPIO7_LOW (NR_IRQS_LEGACY + 107)
+#define MX53_INT_GPIO7_HIGH (NR_IRQS_LEGACY + 108)
+
+#endif /* ifndef __MACH_MX53_H__ */
diff --git a/arch/arm/mach-imx/include/mach/mx6q.h b/arch/arm/mach-imx/include/mach/mx6q.h
new file mode 100644
index 0000000..f7e7dba
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx6q.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_MX6Q_H__
+#define __MACH_MX6Q_H__
+
+#define MX6Q_IO_P2V(x) IMX_IO_P2V(x)
+#define MX6Q_IO_ADDRESS(x) IOMEM(MX6Q_IO_P2V(x))
+
+/*
+ * The following are the blocks that need to be statically mapped.
+ * For other blocks, the base address really should be retrieved from
+ * device tree.
+ */
+#define MX6Q_SCU_BASE_ADDR 0x00a00000
+#define MX6Q_SCU_SIZE 0x1000
+#define MX6Q_CCM_BASE_ADDR 0x020c4000
+#define MX6Q_CCM_SIZE 0x4000
+#define MX6Q_ANATOP_BASE_ADDR 0x020c8000
+#define MX6Q_ANATOP_SIZE 0x1000
+#define MX6Q_UART2_BASE_ADDR 0x021e8000
+#define MX6Q_UART2_SIZE 0x4000
+#define MX6Q_UART4_BASE_ADDR 0x021f0000
+#define MX6Q_UART4_SIZE 0x4000
+
+#endif /* __MACH_MX6Q_H__ */
diff --git a/arch/arm/mach-imx/include/mach/mxc.h b/arch/arm/mach-imx/include/mach/mxc.h
new file mode 100644
index 0000000..d782983
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mxc.h
@@ -0,0 +1,179 @@
+/*
+ * Copyright 2004-2007, 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_H__
+#define __ASM_ARCH_MXC_H__
+
+#include <linux/types.h>
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+#define MXC_CPU_MX1 1
+#define MXC_CPU_MX21 21
+#define MXC_CPU_MX25 25
+#define MXC_CPU_MX27 27
+#define MXC_CPU_MX31 31
+#define MXC_CPU_MX35 35
+#define MXC_CPU_MX50 50
+#define MXC_CPU_MX51 51
+#define MXC_CPU_MX53 53
+
+#define IMX_CHIP_REVISION_1_0 0x10
+#define IMX_CHIP_REVISION_1_1 0x11
+#define IMX_CHIP_REVISION_1_2 0x12
+#define IMX_CHIP_REVISION_1_3 0x13
+#define IMX_CHIP_REVISION_2_0 0x20
+#define IMX_CHIP_REVISION_2_1 0x21
+#define IMX_CHIP_REVISION_2_2 0x22
+#define IMX_CHIP_REVISION_2_3 0x23
+#define IMX_CHIP_REVISION_3_0 0x30
+#define IMX_CHIP_REVISION_3_1 0x31
+#define IMX_CHIP_REVISION_3_2 0x32
+#define IMX_CHIP_REVISION_3_3 0x33
+#define IMX_CHIP_REVISION_UNKNOWN 0xff
+
+#ifndef __ASSEMBLY__
+extern unsigned int __mxc_cpu_type;
+#endif
+
+#ifdef CONFIG_SOC_IMX1
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX1
+# endif
+# define cpu_is_mx1() (mxc_cpu_type == MXC_CPU_MX1)
+#else
+# define cpu_is_mx1() (0)
+#endif
+
+#ifdef CONFIG_SOC_IMX21
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX21
+# endif
+# define cpu_is_mx21() (mxc_cpu_type == MXC_CPU_MX21)
+#else
+# define cpu_is_mx21() (0)
+#endif
+
+#ifdef CONFIG_SOC_IMX25
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX25
+# endif
+# define cpu_is_mx25() (mxc_cpu_type == MXC_CPU_MX25)
+#else
+# define cpu_is_mx25() (0)
+#endif
+
+#ifdef CONFIG_SOC_IMX27
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX27
+# endif
+# define cpu_is_mx27() (mxc_cpu_type == MXC_CPU_MX27)
+#else
+# define cpu_is_mx27() (0)
+#endif
+
+#ifdef CONFIG_SOC_IMX31
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX31
+# endif
+# define cpu_is_mx31() (mxc_cpu_type == MXC_CPU_MX31)
+#else
+# define cpu_is_mx31() (0)
+#endif
+
+#ifdef CONFIG_SOC_IMX35
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX35
+# endif
+# define cpu_is_mx35() (mxc_cpu_type == MXC_CPU_MX35)
+#else
+# define cpu_is_mx35() (0)
+#endif
+
+#ifdef CONFIG_SOC_IMX50
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX50
+# endif
+# define cpu_is_mx50() (mxc_cpu_type == MXC_CPU_MX50)
+#else
+# define cpu_is_mx50() (0)
+#endif
+
+#ifdef CONFIG_SOC_IMX51
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX51
+# endif
+# define cpu_is_mx51() (mxc_cpu_type == MXC_CPU_MX51)
+#else
+# define cpu_is_mx51() (0)
+#endif
+
+#ifdef CONFIG_SOC_IMX53
+# ifdef mxc_cpu_type
+# undef mxc_cpu_type
+# define mxc_cpu_type __mxc_cpu_type
+# else
+# define mxc_cpu_type MXC_CPU_MX53
+# endif
+# define cpu_is_mx53() (mxc_cpu_type == MXC_CPU_MX53)
+#else
+# define cpu_is_mx53() (0)
+#endif
+
+#ifndef __ASSEMBLY__
+
+struct cpu_op {
+ u32 cpu_rate;
+};
+
+int tzic_enable_wake(void);
+
+extern struct cpu_op *(*get_cpu_op)(int *op);
+#endif
+
+#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35())
+#define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27())
+
+#endif /* __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/mach-imx/include/mach/timex.h
new file mode 100644
index 0000000..10343d1
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/timex.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MXC_TIMEX_H__
+#define __ASM_ARCH_MXC_TIMEX_H__
+
+/* Bogus value */
+#define CLOCK_TICK_RATE 12345678
+
+#endif /* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/mach-imx/include/mach/ulpi.h b/arch/arm/mach-imx/include/mach/ulpi.h
new file mode 100644
index 0000000..42bdaca
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/ulpi.h
@@ -0,0 +1,16 @@
+#ifndef __MACH_ULPI_H
+#define __MACH_ULPI_H
+
+#ifdef CONFIG_USB_ULPI
+struct usb_phy *imx_otg_ulpi_create(unsigned int flags);
+#else
+static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
+{
+ return NULL;
+}
+#endif
+
+extern struct usb_phy_io_ops mxc_ulpi_access_ops;
+
+#endif /* __MACH_ULPI_H */
+
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
new file mode 100644
index 0000000..477971b
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/uncompress.h
@@ -0,0 +1,132 @@
+/*
+ * arch/arm/plat-mxc/include/mach/uncompress.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
+#define __ASM_ARCH_MXC_UNCOMPRESS_H__
+
+#define __MXC_BOOT_UNCOMPRESS
+
+#include <asm/mach-types.h>
+
+unsigned long uart_base;
+
+#define UART(x) (*(volatile unsigned long *)(uart_base + (x)))
+
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR 0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader. We search for the first enabled
+ * port in the most probable order. If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+
+static void putc(int ch)
+{
+ if (!uart_base)
+ return;
+ if (!(UART(UCR1) & UCR1_UARTEN))
+ return;
+
+ while (!(UART(USR2) & USR2_TXFE))
+ barrier();
+
+ UART(TXR) = ch;
+}
+
+static inline void flush(void)
+{
+}
+
+#define MX1_UART1_BASE_ADDR 0x00206000
+#define MX25_UART1_BASE_ADDR 0x43f90000
+#define MX2X_UART1_BASE_ADDR 0x1000a000
+#define MX3X_UART1_BASE_ADDR 0x43F90000
+#define MX3X_UART2_BASE_ADDR 0x43F94000
+#define MX3X_UART5_BASE_ADDR 0x43FB4000
+#define MX51_UART1_BASE_ADDR 0x73fbc000
+#define MX50_UART1_BASE_ADDR 0x53fbc000
+#define MX53_UART1_BASE_ADDR 0x53fbc000
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+ switch (arch_id) {
+ case MACH_TYPE_MX1ADS:
+ case MACH_TYPE_SCB9328:
+ uart_base = MX1_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_MX25_3DS:
+ uart_base = MX25_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_IMX27LITE:
+ case MACH_TYPE_MX27_3DS:
+ case MACH_TYPE_MX27ADS:
+ case MACH_TYPE_PCM038:
+ case MACH_TYPE_MX21ADS:
+ case MACH_TYPE_PCA100:
+ case MACH_TYPE_MXT_TD60:
+ case MACH_TYPE_IMX27IPCAM:
+ uart_base = MX2X_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_MX31LITE:
+ case MACH_TYPE_ARMADILLO5X0:
+ case MACH_TYPE_MX31MOBOARD:
+ case MACH_TYPE_QONG:
+ case MACH_TYPE_MX31_3DS:
+ case MACH_TYPE_PCM037:
+ case MACH_TYPE_MX31ADS:
+ case MACH_TYPE_MX35_3DS:
+ case MACH_TYPE_PCM043:
+ case MACH_TYPE_LILLY1131:
+ case MACH_TYPE_VPR200:
+ case MACH_TYPE_EUKREA_CPUIMX35SD:
+ uart_base = MX3X_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_MAGX_ZN5:
+ uart_base = MX3X_UART2_BASE_ADDR;
+ break;
+ case MACH_TYPE_BUG:
+ uart_base = MX3X_UART5_BASE_ADDR;
+ break;
+ case MACH_TYPE_MX51_BABBAGE:
+ case MACH_TYPE_EUKREA_CPUIMX51SD:
+ case MACH_TYPE_MX51_3DS:
+ uart_base = MX51_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_MX50_RDP:
+ uart_base = MX50_UART1_BASE_ADDR;
+ break;
+ case MACH_TYPE_MX53_EVK:
+ case MACH_TYPE_MX53_LOCO:
+ case MACH_TYPE_MX53_SMD:
+ case MACH_TYPE_MX53_ARD:
+ uart_base = MX53_UART1_BASE_ADDR;
+ break;
+ default:
+ break;
+ }
+}
+
+#define arch_decomp_setup() __arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()
+
+#endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c
new file mode 100644
index 0000000..074c386
--- /dev/null
+++ b/arch/arm/mach-imx/iram_alloc.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/genalloc.h>
+#include <mach/iram.h>
+
+static unsigned long iram_phys_base;
+static void __iomem *iram_virt_base;
+static struct gen_pool *iram_pool;
+
+static inline void __iomem *iram_phys_to_virt(unsigned long p)
+{
+ return iram_virt_base + (p - iram_phys_base);
+}
+
+void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
+{
+ if (!iram_pool)
+ return NULL;
+
+ *dma_addr = gen_pool_alloc(iram_pool, size);
+ pr_debug("iram alloc - %dB@0x%lX\n", size, *dma_addr);
+ if (!*dma_addr)
+ return NULL;
+ return iram_phys_to_virt(*dma_addr);
+}
+EXPORT_SYMBOL(iram_alloc);
+
+void iram_free(unsigned long addr, unsigned int size)
+{
+ if (!iram_pool)
+ return;
+
+ gen_pool_free(iram_pool, addr, size);
+}
+EXPORT_SYMBOL(iram_free);
+
+int __init iram_init(unsigned long base, unsigned long size)
+{
+ iram_phys_base = base;
+
+ iram_pool = gen_pool_create(PAGE_SHIFT, -1);
+ if (!iram_pool)
+ return -ENOMEM;
+
+ gen_pool_add(iram_pool, base, size, -1);
+ iram_virt_base = ioremap(iram_phys_base, size);
+ if (!iram_virt_base)
+ return -EIO;
+
+ pr_debug("i.MX IRAM pool: %ld KB@0x%p\n", size / 1024, iram_virt_base);
+ return 0;
+}
diff --git a/arch/arm/mach-imx/irq-common.c b/arch/arm/mach-imx/irq-common.c
new file mode 100644
index 0000000..b6e1145
--- /dev/null
+++ b/arch/arm/mach-imx/irq-common.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) BitBox Ltd 2010
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+
+#include "irq-common.h"
+
+int imx_irq_set_priority(unsigned char irq, unsigned char prio)
+{
+ struct irq_chip_generic *gc;
+ struct mxc_extra_irq *exirq;
+ int ret;
+
+ ret = -ENOSYS;
+
+ gc = irq_get_chip_data(irq);
+ if (gc && gc->private) {
+ exirq = gc->private;
+ if (exirq->set_priority)
+ ret = exirq->set_priority(irq, prio);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(imx_irq_set_priority);
+
+int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
+{
+ struct irq_chip_generic *gc;
+ struct mxc_extra_irq *exirq;
+ int ret;
+
+ ret = -ENOSYS;
+
+ gc = irq_get_chip_data(irq);
+ if (gc && gc->private) {
+ exirq = gc->private;
+ if (exirq->set_irq_fiq)
+ ret = exirq->set_irq_fiq(irq, type);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(mxc_set_irq_fiq);
diff --git a/arch/arm/mach-imx/irq-common.h b/arch/arm/mach-imx/irq-common.h
new file mode 100644
index 0000000..6ccb3a1
--- /dev/null
+++ b/arch/arm/mach-imx/irq-common.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) BitBox Ltd 2010
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __PLAT_MXC_IRQ_COMMON_H__
+#define __PLAT_MXC_IRQ_COMMON_H__
+
+struct mxc_extra_irq
+{
+ int (*set_priority)(unsigned char irq, unsigned char prio);
+ int (*set_irq_fiq)(unsigned int irq, unsigned int type);
+};
+
+#endif
diff --git a/arch/arm/mach-imx/ssi-fiq-ksym.c b/arch/arm/mach-imx/ssi-fiq-ksym.c
new file mode 100644
index 0000000..792090f
--- /dev/null
+++ b/arch/arm/mach-imx/ssi-fiq-ksym.c
@@ -0,0 +1,20 @@
+/*
+ * Exported ksyms for the SSI FIQ handler
+ *
+ * Copyright (C) 2009, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+
+#include <linux/platform_data/asoc-imx-ssi.h>
+
+EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer);
+EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer);
+EXPORT_SYMBOL(imx_ssi_fiq_start);
+EXPORT_SYMBOL(imx_ssi_fiq_end);
+EXPORT_SYMBOL(imx_ssi_fiq_base);
+
diff --git a/arch/arm/mach-imx/ssi-fiq.S b/arch/arm/mach-imx/ssi-fiq.S
new file mode 100644
index 0000000..a8b93c5
--- /dev/null
+++ b/arch/arm/mach-imx/ssi-fiq.S
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * r8 = bit 0-15: tx offset, bit 16-31: tx buffer size
+ * r9 = bit 0-15: rx offset, bit 16-31: rx buffer size
+ */
+
+#define SSI_STX0 0x00
+#define SSI_SRX0 0x08
+#define SSI_SISR 0x14
+#define SSI_SIER 0x18
+#define SSI_SACNT 0x38
+
+#define SSI_SACNT_AC97EN (1 << 0)
+
+#define SSI_SIER_TFE0_EN (1 << 0)
+#define SSI_SISR_TFE0 (1 << 0)
+#define SSI_SISR_RFF0 (1 << 2)
+#define SSI_SIER_RFF0_EN (1 << 2)
+
+ .text
+ .global imx_ssi_fiq_start
+ .global imx_ssi_fiq_end
+ .global imx_ssi_fiq_base
+ .global imx_ssi_fiq_rx_buffer
+ .global imx_ssi_fiq_tx_buffer
+
+/*
+ * imx_ssi_fiq_start is _intentionally_ not marked as a function symbol
+ * using ENDPROC(). imx_ssi_fiq_start and imx_ssi_fiq_end are used to
+ * mark the function body so that it can be copied to the FIQ vector in
+ * the vectors page. imx_ssi_fiq_start should only be called as the result
+ * of an FIQ: calling it directly will not work.
+ */
+imx_ssi_fiq_start:
+ ldr r12, .L_imx_ssi_fiq_base
+
+ /* TX */
+ ldr r13, .L_imx_ssi_fiq_tx_buffer
+
+ /* shall we send? */
+ ldr r11, [r12, #SSI_SIER]
+ tst r11, #SSI_SIER_TFE0_EN
+ beq 1f
+
+ /* TX FIFO empty? */
+ ldr r11, [r12, #SSI_SISR]
+ tst r11, #SSI_SISR_TFE0
+ beq 1f
+
+ mov r10, #0x10000
+ sub r10, #1
+ and r10, r10, r8 /* r10: current buffer offset */
+
+ add r13, r13, r10
+
+ ldrh r11, [r13]
+ strh r11, [r12, #SSI_STX0]
+
+ ldrh r11, [r13, #2]
+ strh r11, [r12, #SSI_STX0]
+
+ ldrh r11, [r13, #4]
+ strh r11, [r12, #SSI_STX0]
+
+ ldrh r11, [r13, #6]
+ strh r11, [r12, #SSI_STX0]
+
+ add r10, #8
+ lsr r11, r8, #16 /* r11: buffer size */
+ cmp r10, r11
+ lslgt r8, r11, #16
+ addle r8, #8
+1:
+ /* RX */
+
+ /* shall we receive? */
+ ldr r11, [r12, #SSI_SIER]
+ tst r11, #SSI_SIER_RFF0_EN
+ beq 1f
+
+ /* RX FIFO full? */
+ ldr r11, [r12, #SSI_SISR]
+ tst r11, #SSI_SISR_RFF0
+ beq 1f
+
+ ldr r13, .L_imx_ssi_fiq_rx_buffer
+
+ mov r10, #0x10000
+ sub r10, #1
+ and r10, r10, r9 /* r10: current buffer offset */
+
+ add r13, r13, r10
+
+ ldr r11, [r12, #SSI_SACNT]
+ tst r11, #SSI_SACNT_AC97EN
+
+ ldr r11, [r12, #SSI_SRX0]
+ strh r11, [r13]
+
+ ldr r11, [r12, #SSI_SRX0]
+ strh r11, [r13, #2]
+
+ /* dummy read to skip slot 12 */
+ ldrne r11, [r12, #SSI_SRX0]
+
+ ldr r11, [r12, #SSI_SRX0]
+ strh r11, [r13, #4]
+
+ ldr r11, [r12, #SSI_SRX0]
+ strh r11, [r13, #6]
+
+ /* dummy read to skip slot 12 */
+ ldrne r11, [r12, #SSI_SRX0]
+
+ add r10, #8
+ lsr r11, r9, #16 /* r11: buffer size */
+ cmp r10, r11
+ lslgt r9, r11, #16
+ addle r9, #8
+
+1:
+ @ return from FIQ
+ subs pc, lr, #4
+
+ .align
+.L_imx_ssi_fiq_base:
+imx_ssi_fiq_base:
+ .word 0x0
+.L_imx_ssi_fiq_rx_buffer:
+imx_ssi_fiq_rx_buffer:
+ .word 0x0
+.L_imx_ssi_fiq_tx_buffer:
+imx_ssi_fiq_tx_buffer:
+ .word 0x0
+.L_imx_ssi_fiq_end:
+imx_ssi_fiq_end:
+
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
new file mode 100644
index 0000000..3da78cf
--- /dev/null
+++ b/arch/arm/mach-imx/system.c
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/system_misc.h>
+#include <asm/proc-fns.h>
+#include <asm/mach-types.h>
+
+static void __iomem *wdog_base;
+
+/*
+ * Reset the system. It is called by machine_restart().
+ */
+void mxc_restart(char mode, const char *cmd)
+{
+ unsigned int wcr_enable;
+
+ if (cpu_is_mx1()) {
+ wcr_enable = (1 << 0);
+ } else {
+ struct clk *clk;
+
+ clk = clk_get_sys("imx2-wdt.0", NULL);
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+ wcr_enable = (1 << 2);
+ }
+
+ /* Assert SRS signal */
+ __raw_writew(wcr_enable, wdog_base);
+
+ /* wait for reset to assert... */
+ mdelay(500);
+
+ printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+ /* delay to allow the serial port to show the message */
+ mdelay(50);
+
+ /* we'll take a jump through zero as a poor second */
+ soft_restart(0);
+}
+
+void mxc_arch_reset_init(void __iomem *base)
+{
+ wdog_base = base;
+}
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
new file mode 100644
index 0000000..a17abcf
--- /dev/null
+++ b/arch/arm/mach-imx/time.c
@@ -0,0 +1,325 @@
+/*
+ * linux/arch/arm/plat-mxc/time.c
+ *
+ * Copyright (C) 2000-2001 Deep Blue Solutions
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <asm/sched_clock.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+
+/*
+ * There are 2 versions of the timer hardware on Freescale MXC hardware.
+ * Version 1: MX1/MXL, MX21, MX27.
+ * Version 2: MX25, MX31, MX35, MX37, MX51
+ */
+
+/* defines common for all i.MX */
+#define MXC_TCTL 0x00
+#define MXC_TCTL_TEN (1 << 0) /* Enable module */
+#define MXC_TPRER 0x04
+
+/* MX1, MX21, MX27 */
+#define MX1_2_TCTL_CLK_PCLK1 (1 << 1)
+#define MX1_2_TCTL_IRQEN (1 << 4)
+#define MX1_2_TCTL_FRR (1 << 8)
+#define MX1_2_TCMP 0x08
+#define MX1_2_TCN 0x10
+#define MX1_2_TSTAT 0x14
+
+/* MX21, MX27 */
+#define MX2_TSTAT_CAPT (1 << 1)
+#define MX2_TSTAT_COMP (1 << 0)
+
+/* MX31, MX35, MX25, MX5 */
+#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
+#define V2_TCTL_CLK_IPG (1 << 6)
+#define V2_TCTL_CLK_PER (2 << 6)
+#define V2_TCTL_FRR (1 << 9)
+#define V2_IR 0x0c
+#define V2_TSTAT 0x08
+#define V2_TSTAT_OF1 (1 << 0)
+#define V2_TCN 0x24
+#define V2_TCMP 0x10
+
+#define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
+#define timer_is_v2() (!timer_is_v1())
+
+static struct clock_event_device clockevent_mxc;
+static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
+
+static void __iomem *timer_base;
+
+static inline void gpt_irq_disable(void)
+{
+ unsigned int tmp;
+
+ if (timer_is_v2())
+ __raw_writel(0, timer_base + V2_IR);
+ else {
+ tmp = __raw_readl(timer_base + MXC_TCTL);
+ __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
+ }
+}
+
+static inline void gpt_irq_enable(void)
+{
+ if (timer_is_v2())
+ __raw_writel(1<<0, timer_base + V2_IR);
+ else {
+ __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
+ timer_base + MXC_TCTL);
+ }
+}
+
+static void gpt_irq_acknowledge(void)
+{
+ if (timer_is_v1()) {
+ if (cpu_is_mx1())
+ __raw_writel(0, timer_base + MX1_2_TSTAT);
+ else
+ __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP,
+ timer_base + MX1_2_TSTAT);
+ } else if (timer_is_v2())
+ __raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT);
+}
+
+static void __iomem *sched_clock_reg;
+
+static u32 notrace mxc_read_sched_clock(void)
+{
+ return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
+}
+
+static int __init mxc_clocksource_init(struct clk *timer_clk)
+{
+ unsigned int c = clk_get_rate(timer_clk);
+ void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN);
+
+ sched_clock_reg = reg;
+
+ setup_sched_clock(mxc_read_sched_clock, 32, c);
+ return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32,
+ clocksource_mmio_readl_up);
+}
+
+/* clock event */
+
+static int mx1_2_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long tcmp;
+
+ tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt;
+
+ __raw_writel(tcmp, timer_base + MX1_2_TCMP);
+
+ return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ?
+ -ETIME : 0;
+}
+
+static int v2_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long tcmp;
+
+ tcmp = __raw_readl(timer_base + V2_TCN) + evt;
+
+ __raw_writel(tcmp, timer_base + V2_TCMP);
+
+ return (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ?
+ -ETIME : 0;
+}
+
+#ifdef DEBUG
+static const char *clock_event_mode_label[] = {
+ [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
+ [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT",
+ [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
+ [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED",
+ [CLOCK_EVT_MODE_RESUME] = "CLOCK_EVT_MODE_RESUME",
+};
+#endif /* DEBUG */
+
+static void mxc_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned long flags;
+
+ /*
+ * The timer interrupt generation is disabled at least
+ * for enough time to call mxc_set_next_event()
+ */
+ local_irq_save(flags);
+
+ /* Disable interrupt in GPT module */
+ gpt_irq_disable();
+
+ if (mode != clockevent_mode) {
+ /* Set event time into far-far future */
+ if (timer_is_v2())
+ __raw_writel(__raw_readl(timer_base + V2_TCN) - 3,
+ timer_base + V2_TCMP);
+ else
+ __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
+ timer_base + MX1_2_TCMP);
+
+ /* Clear pending interrupt */
+ gpt_irq_acknowledge();
+ }
+
+#ifdef DEBUG
+ printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n",
+ clock_event_mode_label[clockevent_mode],
+ clock_event_mode_label[mode]);
+#endif /* DEBUG */
+
+ /* Remember timer mode */
+ clockevent_mode = mode;
+ local_irq_restore(flags);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ printk(KERN_ERR"mxc_set_mode: Periodic mode is not "
+ "supported for i.MX\n");
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /*
+ * Do not put overhead of interrupt enable/disable into
+ * mxc_set_next_event(), the core has about 4 minutes
+ * to call mxc_set_next_event() or shutdown clock after
+ * mode switching
+ */
+ local_irq_save(flags);
+ gpt_irq_enable();
+ local_irq_restore(flags);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_RESUME:
+ /* Left event sources disabled, no more interrupts appear */
+ break;
+ }
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &clockevent_mxc;
+ uint32_t tstat;
+
+ if (timer_is_v2())
+ tstat = __raw_readl(timer_base + V2_TSTAT);
+ else
+ tstat = __raw_readl(timer_base + MX1_2_TSTAT);
+
+ gpt_irq_acknowledge();
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction mxc_timer_irq = {
+ .name = "i.MX Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = mxc_timer_interrupt,
+};
+
+static struct clock_event_device clockevent_mxc = {
+ .name = "mxc_timer1",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_mode = mxc_set_mode,
+ .set_next_event = mx1_2_set_next_event,
+ .rating = 200,
+};
+
+static int __init mxc_clockevent_init(struct clk *timer_clk)
+{
+ unsigned int c = clk_get_rate(timer_clk);
+
+ if (timer_is_v2())
+ clockevent_mxc.set_next_event = v2_set_next_event;
+
+ clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
+ clockevent_mxc.shift);
+ clockevent_mxc.max_delta_ns =
+ clockevent_delta2ns(0xfffffffe, &clockevent_mxc);
+ clockevent_mxc.min_delta_ns =
+ clockevent_delta2ns(0xff, &clockevent_mxc);
+
+ clockevent_mxc.cpumask = cpumask_of(0);
+
+ clockevents_register_device(&clockevent_mxc);
+
+ return 0;
+}
+
+void __init mxc_timer_init(void __iomem *base, int irq)
+{
+ uint32_t tctl_val;
+ struct clk *timer_clk;
+ struct clk *timer_ipg_clk;
+
+ timer_clk = clk_get_sys("imx-gpt.0", "per");
+ if (IS_ERR(timer_clk)) {
+ pr_err("i.MX timer: unable to get clk\n");
+ return;
+ }
+
+ timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
+ if (!IS_ERR(timer_ipg_clk))
+ clk_prepare_enable(timer_ipg_clk);
+
+ clk_prepare_enable(timer_clk);
+
+ timer_base = base;
+
+ /*
+ * Initialise to a known state (all timers off, and timing reset)
+ */
+
+ __raw_writel(0, timer_base + MXC_TCTL);
+ __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
+
+ if (timer_is_v2())
+ tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
+ else
+ tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+
+ __raw_writel(tctl_val, timer_base + MXC_TCTL);
+
+ /* init and register the timer to the framework */
+ mxc_clocksource_init(timer_clk);
+ mxc_clockevent_init(timer_clk);
+
+ /* Make irqs happen */
+ setup_irq(irq, &mxc_timer_irq);
+}
diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c
new file mode 100644
index 0000000..3ed1adb
--- /dev/null
+++ b/arch/arm/mach-imx/tzic.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C)2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+
+#include <asm/mach/irq.h>
+#include <asm/exception.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+
+#include "irq-common.h"
+
+/*
+ *****************************************
+ * TZIC Registers *
+ *****************************************
+ */
+
+#define TZIC_INTCNTL 0x0000 /* Control register */
+#define TZIC_INTTYPE 0x0004 /* Controller Type register */
+#define TZIC_IMPID 0x0008 /* Distributor Implementer Identification */
+#define TZIC_PRIOMASK 0x000C /* Priority Mask Reg */
+#define TZIC_SYNCCTRL 0x0010 /* Synchronizer Control register */
+#define TZIC_DSMINT 0x0014 /* DSM interrupt Holdoffregister */
+#define TZIC_INTSEC0(i) (0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */
+#define TZIC_ENSET0(i) (0x0100 + ((i) << 2)) /* Enable Set Reg 0 */
+#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */
+#define TZIC_SRCSET0 0x0200 /* Source Set Register 0 */
+#define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */
+#define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */
+#define TZIC_PND0 0x0D00 /* Pending Register 0 */
+#define TZIC_HIPND(i) (0x0D80+ ((i) << 2)) /* High Priority Pending Register */
+#define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */
+#define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */
+#define TZIC_ID0 0x0FD0 /* Indentification Register 0 */
+
+void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
+static struct irq_domain *domain;
+
+#define TZIC_NUM_IRQS 128
+
+#ifdef CONFIG_FIQ
+static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
+{
+ unsigned int index, mask, value;
+
+ index = irq >> 5;
+ if (unlikely(index >= 4))
+ return -EINVAL;
+ mask = 1U << (irq & 0x1F);
+
+ value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
+ if (type)
+ value &= ~mask;
+ __raw_writel(value, tzic_base + TZIC_INTSEC0(index));
+
+ return 0;
+}
+#else
+#define tzic_set_irq_fiq NULL
+#endif
+
+#ifdef CONFIG_PM
+static void tzic_irq_suspend(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ int idx = d->hwirq >> 5;
+
+ __raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx));
+}
+
+static void tzic_irq_resume(struct irq_data *d)
+{
+ int idx = d->hwirq >> 5;
+
+ __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)),
+ tzic_base + TZIC_WAKEUP0(idx));
+}
+
+#else
+#define tzic_irq_suspend NULL
+#define tzic_irq_resume NULL
+#endif
+
+static struct mxc_extra_irq tzic_extra_irq = {
+#ifdef CONFIG_FIQ
+ .set_irq_fiq = tzic_set_irq_fiq,
+#endif
+};
+
+static __init void tzic_init_gc(int idx, unsigned int irq_start)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base,
+ handle_level_irq);
+ gc->private = &tzic_extra_irq;
+ gc->wake_enabled = IRQ_MSK(32);
+
+ ct = gc->chip_types;
+ ct->chip.irq_mask = irq_gc_mask_disable_reg;
+ ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+ ct->chip.irq_set_wake = irq_gc_set_wake;
+ ct->chip.irq_suspend = tzic_irq_suspend;
+ ct->chip.irq_resume = tzic_irq_resume;
+ ct->regs.disable = TZIC_ENCLEAR0(idx);
+ ct->regs.enable = TZIC_ENSET0(idx);
+
+ irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
+}
+
+asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
+{
+ u32 stat;
+ int i, irqofs, handled;
+
+ do {
+ handled = 0;
+
+ for (i = 0; i < 4; i++) {
+ stat = __raw_readl(tzic_base + TZIC_HIPND(i)) &
+ __raw_readl(tzic_base + TZIC_INTSEC0(i));
+
+ while (stat) {
+ handled = 1;
+ irqofs = fls(stat) - 1;
+ handle_IRQ(irq_find_mapping(domain,
+ irqofs + i * 32), regs);
+ stat &= ~(1 << irqofs);
+ }
+ }
+ } while (handled);
+}
+
+/*
+ * This function initializes the TZIC hardware and disables all the
+ * interrupts. It registers the interrupt enable and disable functions
+ * to the kernel for each interrupt source.
+ */
+void __init tzic_init_irq(void __iomem *irqbase)
+{
+ struct device_node *np;
+ int irq_base;
+ int i;
+
+ tzic_base = irqbase;
+ /* put the TZIC into the reset value with
+ * all interrupts disabled
+ */
+ i = __raw_readl(tzic_base + TZIC_INTCNTL);
+
+ __raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
+ __raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
+ __raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
+
+ for (i = 0; i < 4; i++)
+ __raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
+
+ /* disable all interrupts */
+ for (i = 0; i < 4; i++)
+ __raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
+
+ /* all IRQ no FIQ Warning :: No selection */
+
+ irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id());
+ WARN_ON(irq_base < 0);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,tzic");
+ domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ WARN_ON(!domain);
+
+ for (i = 0; i < 4; i++, irq_base += 32)
+ tzic_init_gc(i, irq_base);
+
+#ifdef CONFIG_FIQ
+ /* Initialize FIQ */
+ init_FIQ(FIQ_START);
+#endif
+
+ pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
+}
+
+/**
+ * tzic_enable_wake() - enable wakeup interrupt
+ *
+ * @return 0 if successful; non-zero otherwise
+ *
+ * This function provides an interrupt synchronization point that is required
+ * by tzic enabled platforms before entering imx specific low power modes (ie,
+ * those low power modes beyond the WAIT_CLOCKED basic ARM WFI only mode).
+ */
+int tzic_enable_wake(void)
+{
+ unsigned int i;
+
+ __raw_writel(1, tzic_base + TZIC_DSMINT);
+ if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
+ return -EAGAIN;
+
+ for (i = 0; i < 4; i++)
+ __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)),
+ tzic_base + TZIC_WAKEUP0(i));
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/ulpi.c b/arch/arm/mach-imx/ulpi.c
new file mode 100644
index 0000000..d296342
--- /dev/null
+++ b/arch/arm/mach-imx/ulpi.c
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ * Copyright 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#include <mach/ulpi.h>
+
+/* ULPIVIEW register bits */
+#define ULPIVW_WU (1 << 31) /* Wakeup */
+#define ULPIVW_RUN (1 << 30) /* read/write run */
+#define ULPIVW_WRITE (1 << 29) /* 0 = read 1 = write */
+#define ULPIVW_SS (1 << 27) /* SyncState */
+#define ULPIVW_PORT_MASK 0x07 /* Port field */
+#define ULPIVW_PORT_SHIFT 24
+#define ULPIVW_ADDR_MASK 0xff /* data address field */
+#define ULPIVW_ADDR_SHIFT 16
+#define ULPIVW_RDATA_MASK 0xff /* read data field */
+#define ULPIVW_RDATA_SHIFT 8
+#define ULPIVW_WDATA_MASK 0xff /* write data field */
+#define ULPIVW_WDATA_SHIFT 0
+
+static int ulpi_poll(void __iomem *view, u32 bit)
+{
+ int timeout = 10000;
+
+ while (timeout--) {
+ u32 data = __raw_readl(view);
+
+ if (!(data & bit))
+ return 0;
+
+ cpu_relax();
+ };
+
+ printk(KERN_WARNING "timeout polling for ULPI device\n");
+
+ return -ETIMEDOUT;
+}
+
+static int ulpi_read(struct usb_phy *otg, u32 reg)
+{
+ int ret;
+ void __iomem *view = otg->io_priv;
+
+ /* make sure interface is running */
+ if (!(__raw_readl(view) & ULPIVW_SS)) {
+ __raw_writel(ULPIVW_WU, view);
+
+ /* wait for wakeup */
+ ret = ulpi_poll(view, ULPIVW_WU);
+ if (ret)
+ return ret;
+ }
+
+ /* read the register */
+ __raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view);
+
+ /* wait for completion */
+ ret = ulpi_poll(view, ULPIVW_RUN);
+ if (ret)
+ return ret;
+
+ return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK;
+}
+
+static int ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
+{
+ int ret;
+ void __iomem *view = otg->io_priv;
+
+ /* make sure the interface is running */
+ if (!(__raw_readl(view) & ULPIVW_SS)) {
+ __raw_writel(ULPIVW_WU, view);
+ /* wait for wakeup */
+ ret = ulpi_poll(view, ULPIVW_WU);
+ if (ret)
+ return ret;
+ }
+
+ __raw_writel((ULPIVW_RUN | ULPIVW_WRITE |
+ (reg << ULPIVW_ADDR_SHIFT) |
+ ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view);
+
+ /* wait for completion */
+ return ulpi_poll(view, ULPIVW_RUN);
+}
+
+struct usb_phy_io_ops mxc_ulpi_access_ops = {
+ .read = ulpi_read,
+ .write = ulpi_write,
+};
+EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
+
+struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
+{
+ return otg_ulpi_create(&mxc_ulpi_access_ops, flags);
+}