tree-wide: Assorted spelling fixes
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index f3757a1..c33360e8 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -28,7 +28,7 @@
*
* Micro9-High has up to 64MB of 32-bit flash on CS1
* Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
- * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Lite uses a separate MTD map driver for flash support
* Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
*************************************************************************/
static struct physmap_flash_data micro9_flash_data;
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 9438bf6..ab3712c 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -38,7 +38,7 @@
#define SRC_CR_INIT_MASK 0x00007fff
#define SRC_CR_INIT_VAL 0x2aaa8000
-/* These adresses span 16MB, so use three individual pages */
+/* These addresses span 16MB, so use three individual pages */
static struct resource nhk8815_nand_resources[] = {
{
.name = "nand_addr",
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 653e25b..d0cb5e9 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -356,7 +356,7 @@
/*
* The AVE3e requires two regions of 256MB that it considers
* "invisible". The hardware will not be able to access these
- * adresses, so they should never point to system RAM.
+ * addresses, so they should never point to system RAM.
*/
{
.name = "AVE3e Reserved 0",
@@ -571,7 +571,7 @@
/*
* Some devices and their resources require reserved physical memory from
* the end of the available RAM. This function traverses the list of devices
- * and assigns actual adresses to these.
+ * and assigns actual addresses to these.
*/
static void __init u300_assign_physmem(void)
{
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index f3a1cbb..d591fe1 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
#include <mach/hardware.h>
.macro addruart,rx
- /* If we move the adress using MMU, use this. */
+ /* If we move the address using MMU, use this. */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
index 652e2bb..dda19da 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
@@ -78,7 +78,7 @@
* others = Special functions (dependant on bank)
*
* Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a seperate set of functions for
+ * registers instead of one, we do not have a separate set of functions for
* each case.
*/
extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
index 36a85f5..a111ad8 100644
--- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
+++ b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
@@ -12,7 +12,7 @@
* published by the Free Software Foundation.
*/
-/* Note, this is a seperate header file as some of the clock framework
+/* Note, this is a separate header file as some of the clock framework
* needs to touch this if the clk_48m is used as the USB OHCI or other
* peripheral source.
*/
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index 33d421d..d623235 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -135,7 +135,7 @@
* @locktime_m: The lock-time in uS for the MPLL.
* @locktime_u: The lock-time in uS for the UPLL.
* @locttime_bits: The number of bits each LOCKTIME field.
- * @need_pll: Set if this driver needs to change the PLL values to acheive
+ * @need_pll: Set if this driver needs to change the PLL values to achieve
* any frequency changes. This is really only need by devices like the
* S3C2410 where there is no or limited divider between the PLL and the
* ARMCLK.