[MIPS] Don't drag a platform specific header into generic arch code.
For some platforms it's definitions may conflict. So that's the one-liner.
The rest is 10 square kilometers of collateral damage fixup this include
used to paper over.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h
index 91803ba..3ca6a07 100644
--- a/include/asm-mips/irq.h
+++ b/include/asm-mips/irq.h
@@ -72,4 +72,13 @@
extern void alloc_legacy_irqno(void);
extern void free_irqno(unsigned int irq);
+/*
+ * Before R2 the timer and performance counter interrupts were both fixed to
+ * IE7. Since R2 their number has to be read from the c0_intctl register.
+ */
+#define CP0_LEGACY_COMPARE_IRQ 7
+
+extern int cp0_compare_irq;
+extern int cp0_perfcount_irq;
+
#endif /* _ASM_IRQ_H */
diff --git a/include/asm-mips/mips-boards/atlasint.h b/include/asm-mips/mips-boards/atlasint.h
index 76add42..93ba1c1 100644
--- a/include/asm-mips/mips-boards/atlasint.h
+++ b/include/asm-mips/mips-boards/atlasint.h
@@ -28,11 +28,6 @@
#include <irq.h>
-/*
- * Interrupts 0..7 are used for Atlas CPU interrupts (nonEIC mode)
- */
-#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
-
/* CPU interrupt offsets */
#define MIPSCPU_INT_SW0 0
#define MIPSCPU_INT_SW1 1
@@ -42,7 +37,6 @@
#define MIPSCPU_INT_MB2 4
#define MIPSCPU_INT_MB3 5
#define MIPSCPU_INT_MB4 6
-#define MIPSCPU_INT_CPUCTR 7
/*
* Interrupts 8..39 are used for Atlas interrupt controller interrupts
diff --git a/include/asm-mips/mips-boards/maltaint.h b/include/asm-mips/mips-boards/maltaint.h
index 9180d64..7461318 100644
--- a/include/asm-mips/mips-boards/maltaint.h
+++ b/include/asm-mips/mips-boards/maltaint.h
@@ -32,11 +32,6 @@
*/
#define MALTA_INT_BASE 0
-/*
- * Interrupts 16..23 are used for Malta CPU interrupts (nonEIC mode)
- */
-#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
-
/* CPU interrupt offsets */
#define MIPSCPU_INT_SW0 0
#define MIPSCPU_INT_SW1 1
@@ -49,7 +44,6 @@
#define MIPSCPU_INT_COREHI MIPSCPU_INT_MB3
#define MIPSCPU_INT_MB4 6
#define MIPSCPU_INT_CORELO MIPSCPU_INT_MB4
-#define MIPSCPU_INT_CPUCTR 7
/*
* Interrupts 64..127 are used for Soc-it Classic interrupts
diff --git a/include/asm-mips/mips-boards/seadint.h b/include/asm-mips/mips-boards/seadint.h
index 4f6a393..e710bae 100644
--- a/include/asm-mips/mips-boards/seadint.h
+++ b/include/asm-mips/mips-boards/seadint.h
@@ -22,14 +22,7 @@
#include <irq.h>
-/*
- * Interrupts 0..7 are used for SEAD CPU interrupts
- */
-#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
-
#define MIPSCPU_INT_UART0 2
#define MIPSCPU_INT_UART1 3
-#define MIPSCPU_INT_CPUCTR 7
-
#endif /* !(_MIPS_SEADINT_H) */
diff --git a/include/asm-mips/mips-boards/simint.h b/include/asm-mips/mips-boards/simint.h
index 54f2fe6..8ef6db7 100644
--- a/include/asm-mips/mips-boards/simint.h
+++ b/include/asm-mips/mips-boards/simint.h
@@ -21,15 +21,11 @@
#define SIM_INT_BASE 0
#define MIPSCPU_INT_MB0 2
-#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
#define MIPS_CPU_TIMER_IRQ 7
-#define MIPSCPU_INT_CPUCTR 7
-
#define MSC01E_INT_BASE 64
-#define MIPSCPU_INT_CPUCTR 7
#define MSC01E_INT_CPUCTR 11
#endif