crypto: omap-aes - DMA initialization fixes for OMAP off mode
DMA parameters for constant data were initialized during driver probe().
It seems that those settings sometimes are lost when devices goes to off mode.
This patch makes DMA initialization just before use.
It solves off mode problems.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index 799ca51..41c91f3 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -339,18 +339,6 @@
goto err_dma_out;
}
- omap_set_dma_dest_params(dd->dma_lch_in, 0, OMAP_DMA_AMODE_CONSTANT,
- dd->phys_base + AES_REG_DATA, 0, 4);
-
- omap_set_dma_dest_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4);
- omap_set_dma_src_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4);
-
- omap_set_dma_src_params(dd->dma_lch_out, 0, OMAP_DMA_AMODE_CONSTANT,
- dd->phys_base + AES_REG_DATA, 0, 4);
-
- omap_set_dma_src_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4);
- omap_set_dma_dest_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4);
-
return 0;
err_dma_out:
@@ -443,6 +431,12 @@
len32 = DIV_ROUND_UP(length, sizeof(u32));
/* IN */
+ omap_set_dma_dest_params(dd->dma_lch_in, 0, OMAP_DMA_AMODE_CONSTANT,
+ dd->phys_base + AES_REG_DATA, 0, 4);
+
+ omap_set_dma_dest_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4);
+ omap_set_dma_src_burst_mode(dd->dma_lch_in, OMAP_DMA_DATA_BURST_4);
+
omap_set_dma_transfer_params(dd->dma_lch_in, OMAP_DMA_DATA_TYPE_S32,
len32, 1, OMAP_DMA_SYNC_PACKET, dd->dma_in,
OMAP_DMA_DST_SYNC);
@@ -451,6 +445,12 @@
dma_addr_in, 0, 0);
/* OUT */
+ omap_set_dma_src_params(dd->dma_lch_out, 0, OMAP_DMA_AMODE_CONSTANT,
+ dd->phys_base + AES_REG_DATA, 0, 4);
+
+ omap_set_dma_src_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4);
+ omap_set_dma_dest_burst_mode(dd->dma_lch_out, OMAP_DMA_DATA_BURST_4);
+
omap_set_dma_transfer_params(dd->dma_lch_out, OMAP_DMA_DATA_TYPE_S32,
len32, 1, OMAP_DMA_SYNC_PACKET,
dd->dma_out, OMAP_DMA_SRC_SYNC);