| /* | 
 |  * LCD panel support for the TI OMAP OSK board | 
 |  * | 
 |  * Copyright (C) 2004 Nokia Corporation | 
 |  * Author: Imre Deak <imre.deak@nokia.com> | 
 |  * Adapted for OSK by <dirk.behme@de.bosch.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify it | 
 |  * under the terms of the GNU General Public License as published by the | 
 |  * Free Software Foundation; either version 2 of the License, or (at your | 
 |  * option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, but | 
 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  * General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License along | 
 |  * with this program; if not, write to the Free Software Foundation, Inc., | 
 |  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 |  | 
 | #include <asm/arch/gpio.h> | 
 | #include <asm/arch/mux.h> | 
 | #include <asm/arch/omapfb.h> | 
 |  | 
 | static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void osk_panel_cleanup(struct lcd_panel *panel) | 
 | { | 
 | } | 
 |  | 
 | static int osk_panel_enable(struct lcd_panel *panel) | 
 | { | 
 | 	/* configure PWL pin */ | 
 | 	omap_cfg_reg(PWL); | 
 |  | 
 | 	/* Enable PWL unit */ | 
 | 	omap_writeb(0x01, OMAP_PWL_CLK_ENABLE); | 
 |  | 
 | 	/* Set PWL level */ | 
 | 	omap_writeb(0xFF, OMAP_PWL_ENABLE); | 
 |  | 
 | 	/* configure GPIO2 as output */ | 
 | 	omap_set_gpio_direction(2, 0); | 
 |  | 
 | 	/* set GPIO2 high */ | 
 | 	omap_set_gpio_dataout(2, 1); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void osk_panel_disable(struct lcd_panel *panel) | 
 | { | 
 | 	/* Set PWL level to zero */ | 
 | 	omap_writeb(0x00, OMAP_PWL_ENABLE); | 
 |  | 
 | 	/* Disable PWL unit */ | 
 | 	omap_writeb(0x00, OMAP_PWL_CLK_ENABLE); | 
 |  | 
 | 	/* set GPIO2 low */ | 
 | 	omap_set_gpio_dataout(2, 0); | 
 | } | 
 |  | 
 | static unsigned long osk_panel_get_caps(struct lcd_panel *panel) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct lcd_panel osk_panel = { | 
 | 	.name		= "osk", | 
 | 	.config		= OMAP_LCDC_PANEL_TFT, | 
 |  | 
 | 	.bpp		= 16, | 
 | 	.data_lines	= 16, | 
 | 	.x_res		= 240, | 
 | 	.y_res		= 320, | 
 | 	.pixel_clock	= 12500, | 
 | 	.hsw		= 40, | 
 | 	.hfp		= 40, | 
 | 	.hbp		= 72, | 
 | 	.vsw		= 1, | 
 | 	.vfp		= 1, | 
 | 	.vbp		= 0, | 
 | 	.pcd		= 12, | 
 |  | 
 | 	.init		= osk_panel_init, | 
 | 	.cleanup	= osk_panel_cleanup, | 
 | 	.enable		= osk_panel_enable, | 
 | 	.disable	= osk_panel_disable, | 
 | 	.get_caps	= osk_panel_get_caps, | 
 | }; | 
 |  | 
 | static int osk_panel_probe(struct platform_device *pdev) | 
 | { | 
 | 	omapfb_register_panel(&osk_panel); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int osk_panel_remove(struct platform_device *pdev) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int osk_panel_suspend(struct platform_device *pdev, pm_message_t mesg) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int osk_panel_resume(struct platform_device *pdev) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct platform_driver osk_panel_driver = { | 
 | 	.probe		= osk_panel_probe, | 
 | 	.remove		= osk_panel_remove, | 
 | 	.suspend	= osk_panel_suspend, | 
 | 	.resume		= osk_panel_resume, | 
 | 	.driver		= { | 
 | 		.name	= "lcd_osk", | 
 | 		.owner	= THIS_MODULE, | 
 | 	}, | 
 | }; | 
 |  | 
 | static int osk_panel_drv_init(void) | 
 | { | 
 | 	return platform_driver_register(&osk_panel_driver); | 
 | } | 
 |  | 
 | static void osk_panel_drv_cleanup(void) | 
 | { | 
 | 	platform_driver_unregister(&osk_panel_driver); | 
 | } | 
 |  | 
 | module_init(osk_panel_drv_init); | 
 | module_exit(osk_panel_drv_cleanup); | 
 |  |