diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 431c375..261fdd0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1,59 +1,58 @@
 config ARM
 	bool
 	default y
-	select ARCH_HAVE_CUSTOM_GPIO_H
-	select HAVE_AOUT
-	select HAVE_DMA_API_DEBUG
-	select HAVE_IDE if PCI || ISA || PCMCIA
-	select HAVE_DMA_ATTRS
-	select HAVE_DMA_CONTIGUOUS if MMU
-	select HAVE_MEMBLOCK
-	select RTC_LIB
-	select SYS_SUPPORTS_APM_EMULATION
-	select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
+	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
-	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
+	select ARCH_HAVE_CUSTOM_GPIO_H
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select CPU_PM if (SUSPEND || CPU_IDLE)
+	select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
+	select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
+	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select GENERIC_KERNEL_THREAD
+	select GENERIC_KERNEL_EXECVE
+	select GENERIC_PCI_IOMAP
+	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_STRNCPY_FROM_USER
+	select GENERIC_STRNLEN_USER
+	select HARDIRQS_SW_RESEND
+	select HAVE_AOUT
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_SYSCALL_TRACEPOINTS
+	select HAVE_BPF_JIT
+	select HAVE_C_RECORDMCOUNT
+	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DMA_API_DEBUG
+	select HAVE_DMA_ATTRS
+	select HAVE_DMA_CONTIGUOUS if MMU
+	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
+	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
+	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
+	select HAVE_GENERIC_DMA_COHERENT
+	select HAVE_GENERIC_HARDIRQS
+	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
+	select HAVE_IDE if PCI || ISA || PCMCIA
+	select HAVE_IRQ_WORK
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_LZMA
+	select HAVE_KERNEL_LZO
+	select HAVE_KERNEL_XZ
 	select HAVE_KPROBES if !XIP_KERNEL
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
-	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
-	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
-	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
-	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
-	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
-	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_DEBUG_KMEMLEAK
-	select HAVE_KERNEL_GZIP
-	select HAVE_KERNEL_LZO
-	select HAVE_KERNEL_LZMA
-	select HAVE_KERNEL_XZ
-	select HAVE_IRQ_WORK
+	select HAVE_MEMBLOCK
+	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_PERF_EVENTS
-	select PERF_USE_VMALLOC
 	select HAVE_REGS_AND_STACK_ACCESS_API
-	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
-	select HAVE_C_RECORDMCOUNT
-	select HAVE_GENERIC_HARDIRQS
-	select HARDIRQS_SW_RESEND
-	select GENERIC_IRQ_PROBE
-	select GENERIC_IRQ_SHOW
+	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
-	select ARCH_WANT_IPC_PARSE_VERSION
-	select HARDIRQS_SW_RESEND
-	select CPU_PM if (SUSPEND || CPU_IDLE)
-	select GENERIC_PCI_IOMAP
-	select HAVE_BPF_JIT
-	select GENERIC_SMP_IDLE_THREAD
 	select KTIME_SCALAR
-	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
-	select GENERIC_STRNCPY_FROM_USER
-	select GENERIC_STRNLEN_USER
-	select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
-	select GENERIC_KERNEL_THREAD
-	select GENERIC_KERNEL_EXECVE
+	select PERF_USE_VMALLOC
+	select RTC_LIB
+	select SYS_SUPPORTS_APM_EMULATION
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -69,9 +68,9 @@
 	bool
 
 config ARM_DMA_USE_IOMMU
-	select NEED_SG_DMA_LENGTH
-	select ARM_HAS_SG_CHAIN
 	bool
+	select ARM_HAS_SG_CHAIN
+	select NEED_SG_DMA_LENGTH
 
 config HAVE_PWM
 	bool
@@ -263,69 +262,69 @@
 
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
+	depends on MMU
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR
 	select COMMON_CLK
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
-	depends on MMU
 
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
-	select ARM_AMBA
 	select ARCH_HAS_CPUFREQ
+	select ARM_AMBA
 	select COMMON_CLK
 	select COMMON_CLK_VERSATILE
+	select GENERIC_CLOCKEVENTS
 	select HAVE_TCM
 	select ICST
-	select GENERIC_CLOCKEVENTS
+	select MULTI_IRQ_HANDLER
+	select NEED_MACH_MEMORY_H
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_FPGA_IRQ
-	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
-	select MULTI_IRQ_HANDLER
 	help
 	  Support for ARM's Integrator platform.
 
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
+	select ARM_TIMER_SP804
 	select COMMON_CLK
 	select COMMON_CLK_VERSATILE
-	select ICST
 	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select GPIO_PL061 if GPIOLIB
+	select ICST
+	select NEED_MACH_MEMORY_H
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_CLCD
-	select ARM_TIMER_SP804
-	select GPIO_PL061 if GPIOLIB
-	select NEED_MACH_MEMORY_H
 	help
 	  This enables support for ARM Ltd RealView boards.
 
 config ARCH_VERSATILE
 	bool "ARM Ltd. Versatile family"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
+	select ARM_TIMER_SP804
 	select ARM_VIC
 	select CLKDEV_LOOKUP
+	select GENERIC_CLOCKEVENTS
 	select HAVE_MACH_CLKDEV
 	select ICST
-	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_CLCD
+	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_FPGA_IRQ
-	select ARM_TIMER_SP804
 	help
 	  This enables support for ARM Ltd Versatile board.
 
 config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
 	select CLKDEV_LOOKUP
+	select HAVE_CLK
 	select IRQ_DOMAIN
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H if PCCARD
@@ -350,43 +349,43 @@
 	  This enables support for the Broadcom BCM2835 SoC. This SoC is
 	  use in the Raspberry Pi, and Roku 2 devices.
 
-config ARCH_CLPS711X
-	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
-	select CPU_ARM720T
-	select ARCH_USES_GETTIMEOFFSET
-	select COMMON_CLK
-	select CLKDEV_LOOKUP
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for Cirrus Logic 711x/721x/731x based boards.
-
 config ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family"
+	select ARM_GIC
 	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
-	select ARM_GIC
 	select MIGHT_HAVE_CACHE_L2X0
 	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	help
 	  Support for Cavium Networks CNS3XXX platform.
 
+config ARCH_CLPS711X
+	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
+	select ARCH_USES_GETTIMEOFFSET
+	select CLKDEV_LOOKUP
+	select COMMON_CLK
+	select CPU_ARM720T
+	select NEED_MACH_MEMORY_H
+	help
+	  Support for Cirrus Logic 711x/721x/731x based boards.
+
 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
-	select CPU_FA526
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_USES_GETTIMEOFFSET
+	select CPU_FA526
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
 config ARCH_SIRF
 	bool "CSR SiRF"
-	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_CLOCKEVENTS
 	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select MIGHT_HAVE_CACHE_L2X0
+	select NO_IOPORT
 	select PINCTRL
 	select PINCTRL_SIRF
 	select USE_OF
@@ -395,12 +394,12 @@
 
 config ARCH_EBSA110
 	bool "EBSA-110"
+	select ARCH_USES_GETTIMEOFFSET
 	select CPU_SA110
 	select ISA
-	select NO_IOPORT
-	select ARCH_USES_GETTIMEOFFSET
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
+	select NO_IOPORT
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an
@@ -409,13 +408,13 @@
 
 config ARCH_EP93XX
 	bool "EP93xx-based"
-	select CPU_ARM920T
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_USES_GETTIMEOFFSET
 	select ARM_AMBA
 	select ARM_VIC
 	select CLKDEV_LOOKUP
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_USES_GETTIMEOFFSET
+	select CPU_ARM920T
 	select NEED_MACH_MEMORY_H
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
@@ -434,10 +433,10 @@
 
 config ARCH_MXC
 	bool "Freescale MXC/iMX-based"
-	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
@@ -447,11 +446,11 @@
 
 config ARCH_MXS
 	bool "Freescale MXS-based"
-	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK_PREPARE
 	select MULTI_IRQ_HANDLER
 	select PINCTRL
@@ -462,43 +461,43 @@
 
 config ARCH_NETX
 	bool "Hilscher NetX based"
+	select ARM_VIC
 	select CLKSRC_MMIO
 	select CPU_ARM926T
-	select ARM_VIC
 	select GENERIC_CLOCKEVENTS
 	help
 	  This enables support for systems based on the Hilscher NetX Soc
 
 config ARCH_H720X
 	bool "Hynix HMS720x-based"
+	select ARCH_USES_GETTIMEOFFSET
 	select CPU_ARM720T
 	select ISA_DMA_API
-	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
-	select CPU_XSC3
-	select PLAT_IOP
-	select PCI
 	select ARCH_SUPPORTS_MSI
-	select VMSPLIT_1G
+	select CPU_XSC3
 	select NEED_MACH_MEMORY_H
 	select NEED_RET_TO_USER
+	select PCI
+	select PLAT_IOP
+	select VMSPLIT_1G
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
 
 config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
+	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select NEED_MACH_GPIO_H
 	select NEED_RET_TO_USER
-	select PLAT_IOP
 	select PCI
-	select ARCH_REQUIRE_GPIOLIB
+	select PLAT_IOP
 	help
 	  Support for Intel's 80219 and IOP32X (XScale) family of
 	  processors.
@@ -506,12 +505,12 @@
 config ARCH_IOP33X
 	bool "IOP33x-based"
 	depends on MMU
+	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select NEED_MACH_GPIO_H
 	select NEED_RET_TO_USER
-	select PLAT_IOP
 	select PCI
-	select ARCH_REQUIRE_GPIOLIB
+	select PLAT_IOP
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
@@ -519,20 +518,20 @@
 	bool "IXP4xx-based"
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
+	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CPU_XSCALE
-	select ARCH_REQUIRE_GPIOLIB
+	select DMABOUNCE if PCI
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select NEED_MACH_IO_H
-	select DMABOUNCE if PCI
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
 config ARCH_DOVE
 	bool "Marvell Dove"
-	select CPU_V7
 	select ARCH_REQUIRE_GPIOLIB
+	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select PLAT_ORION_LEGACY
@@ -542,36 +541,21 @@
 
 config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
-	select CPU_FEROCEON
-	select PCI
 	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select PCI
 	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
 
-config ARCH_LPC32XX
-	bool "NXP LPC32XX"
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_IDE
-	select ARM_AMBA
-	select USB_ARCH_HAS_OHCI
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	select USE_OF
-	select HAVE_PWM
-	help
-	  Support for the NXP LPC32XX family of processors
-
 config ARCH_MV78XX0
 	bool "Marvell MV78xx0"
-	select CPU_FEROCEON
-	select PCI
 	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select PCI
 	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell MV78xx0 series SoCs:
@@ -580,10 +564,10 @@
 config ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU
-	select CPU_FEROCEON
-	select PCI
 	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select PCI
 	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
@@ -595,33 +579,33 @@
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
 	select IRQ_DOMAIN
+	select NEED_MACH_GPIO_H
 	select PLAT_PXA
 	select SPARSE_IRQ
-	select GENERIC_ALLOCATOR
-	select NEED_MACH_GPIO_H
 	help
 	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
-	select CPU_ARM922T
 	select ARCH_REQUIRE_GPIOLIB
-	select NEED_MACH_MEMORY_H
 	select CLKSRC_MMIO
+	select CPU_ARM922T
 	select GENERIC_CLOCKEVENTS
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
 
 config ARCH_W90X900
 	bool "Nuvoton W90X900 CPU"
-	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	help
 	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
@@ -632,18 +616,33 @@
 	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
 		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
 
-config ARCH_TEGRA
-	bool "NVIDIA Tegra"
+config ARCH_LPC32XX
+	bool "NXP LPC32XX"
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
+	select HAVE_IDE
+	select HAVE_PWM
+	select USB_ARCH_HAS_OHCI
+	select USE_OF
+	help
+	  Support for the NXP LPC32XX family of processors
+
+config ARCH_TEGRA
+	bool "NVIDIA Tegra"
+	select ARCH_HAS_CPUFREQ
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
-	select ARCH_HAS_CPUFREQ
 	select USE_OF
-	select COMMON_CLK
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
 	  Tegra 6xx and Tegra 2 series).
@@ -651,29 +650,29 @@
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
-	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
+	select ARCH_MTD_XIP
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_CPU_SUSPEND if PM
+	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
+	select HAVE_IDE
+	select MULTI_IRQ_HANDLER
+	select NEED_MACH_GPIO_H
 	select PLAT_PXA
 	select SPARSE_IRQ
-	select AUTO_ZRELADDR
-	select MULTI_IRQ_HANDLER
-	select ARM_CPU_SUSPEND if PM
-	select HAVE_IDE
-	select NEED_MACH_GPIO_H
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
 config ARCH_MSM
 	bool "Qualcomm MSM"
-	select HAVE_CLK
-	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
 	help
 	  Support for Qualcomm MSM/QSD based systems.  This runs on the
 	  apps processor of the MSM/QSD and depends on a shared memory
@@ -683,50 +682,50 @@
 
 config ARCH_SHMOBILE
 	bool "Renesas SH-Mobile / R-Mobile"
-	select HAVE_CLK
 	select CLKDEV_LOOKUP
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
 	select HAVE_MACH_CLKDEV
 	select HAVE_SMP
-	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_CACHE_L2X0
-	select NO_IOPORT
-	select SPARSE_IRQ
 	select MULTI_IRQ_HANDLER
-	select PM_GENERIC_DOMAINS if PM
 	select NEED_MACH_MEMORY_H
+	select NO_IOPORT
+	select PM_GENERIC_DOMAINS if PM
+	select SPARSE_IRQ
 	help
 	  Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
 
 config ARCH_RPC
 	bool "RiscPC"
 	select ARCH_ACORN
-	select FIQ
 	select ARCH_MAY_HAVE_PC_FDC
-	select HAVE_PATA_PLATFORM
-	select ISA_DMA_API
-	select NO_IOPORT
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_USES_GETTIMEOFFSET
+	select FIQ
 	select HAVE_IDE
+	select HAVE_PATA_PLATFORM
+	select ISA_DMA_API
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
+	select NO_IOPORT
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
 
 config ARCH_SA1100
 	bool "SA1100-based"
-	select CLKSRC_MMIO
-	select CPU_SA1100
-	select ISA
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
-	select CPU_FREQ
-	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
+	select ARCH_MTD_XIP
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_SPARSEMEM_ENABLE
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select CPU_FREQ
+	select CPU_SA1100
+	select GENERIC_CLOCKEVENTS
 	select HAVE_IDE
+	select ISA
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
@@ -735,14 +734,14 @@
 
 config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
-	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
-	select HAVE_CLK
-	select CLKDEV_LOOKUP
 	select ARCH_USES_GETTIMEOFFSET
+	select CLKDEV_LOOKUP
+	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H
 	help
@@ -753,38 +752,38 @@
 
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
-	select PLAT_SAMSUNG
-	select CPU_V6
-	select ARM_VIC
-	select HAVE_CLK
-	select HAVE_TCM
-	select CLKDEV_LOOKUP
-	select NO_IOPORT
-	select ARCH_USES_GETTIMEOFFSET
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
-	select SAMSUNG_CLKSRC
-	select SAMSUNG_IRQ_VIC_TIMER
-	select S3C_GPIO_TRACK
-	select S3C_DEV_NAND
-	select USB_ARCH_HAS_OHCI
-	select SAMSUNG_GPIOLIB_4BIT
+	select ARCH_USES_GETTIMEOFFSET
+	select ARM_VIC
+	select CLKDEV_LOOKUP
+	select CPU_V6
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_TCM
 	select NEED_MACH_GPIO_H
+	select NO_IOPORT
+	select PLAT_SAMSUNG
+	select S3C_DEV_NAND
+	select S3C_GPIO_TRACK
+	select SAMSUNG_CLKSRC
+	select SAMSUNG_GPIOLIB_4BIT
+	select SAMSUNG_IRQ_VIC_TIMER
+	select USB_ARCH_HAS_OHCI
 	help
 	  Samsung S3C64XX series based systems
 
 config ARCH_S5P64X0
 	bool "Samsung S5P6440 S5P6450"
-	select CPU_V6
-	select GENERIC_GPIO
-	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select CPU_V6
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
 	help
@@ -793,50 +792,50 @@
 
 config ARCH_S5PC100
 	bool "Samsung S5PC100"
-	select GENERIC_GPIO
-	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	select CLKDEV_LOOKUP
 	select CPU_V7
-	select ARCH_USES_GETTIMEOFFSET
+	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
 	help
 	  Samsung S5PC100 series based systems
 
 config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
-	select CPU_V7
-	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select GENERIC_GPIO
-	select HAVE_CLK
+	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select ARCH_HAS_CPUFREQ
+	select CPU_V7
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
 config ARCH_EXYNOS
-	bool "SAMSUNG EXYNOS"
-	select CPU_V7
-	select ARCH_SPARSEMEM_ENABLE
+	bool "Samsung EXYNOS"
+	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_SPARSEMEM_ENABLE
+	select CLKDEV_LOOKUP
+	select CPU_V7
+	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select CLKDEV_LOOKUP
-	select ARCH_HAS_CPUFREQ
-	select GENERIC_CLOCKEVENTS
-	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	help
@@ -844,13 +843,13 @@
 
 config ARCH_SHARK
 	bool "Shark"
+	select ARCH_USES_GETTIMEOFFSET
 	select CPU_SA110
 	select ISA
 	select ISA_DMA
-	select ZONE_DMA
-	select PCI
-	select ARCH_USES_GETTIMEOFFSET
 	select NEED_MACH_MEMORY_H
+	select PCI
+	select ZONE_DMA
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -858,17 +857,17 @@
 config ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select HAVE_TCM
+	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
-	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select COMMON_CLK
+	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_TCM
 	select SPARSE_IRQ
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
@@ -876,12 +875,12 @@
 config ARCH_U8500
 	bool "ST-Ericsson U8500 Series"
 	depends on MMU
-	select CPU_V7
-	select ARM_AMBA
-	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select CLKDEV_LOOKUP
+	select CPU_V7
+	select GENERIC_CLOCKEVENTS
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -889,78 +888,78 @@
 
 config ARCH_NOMADIK
 	bool "STMicroelectronics Nomadik"
+	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
-	select CPU_ARM926T
 	select COMMON_CLK
+	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_STN8815
-	select MIGHT_HAVE_CACHE_L2X0
-	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for the Nomadik platform by ST-Ericsson
 
+config PLAT_SPEAR
+	bool "ST SPEAr"
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	help
+	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
+
 config ARCH_DAVINCI
 	bool "TI DaVinci"
-	select GENERIC_CLOCKEVENTS
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_REQUIRE_GPIOLIB
-	select ZONE_DMA
-	select HAVE_IDE
 	select CLKDEV_LOOKUP
 	select GENERIC_ALLOCATOR
+	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select ARCH_HAS_HOLES_MEMORYMODEL
+	select HAVE_IDE
 	select NEED_MACH_GPIO_H
+	select ZONE_DMA
 	help
 	  Support for TI's DaVinci platform.
 
 config ARCH_OMAP
 	bool "TI OMAP"
 	depends on MMU
-	select HAVE_CLK
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
-	select ARCH_HAS_HOLES_MEMORYMODEL
+	select HAVE_CLK
 	select NEED_MACH_GPIO_H
 	help
 	  Support for TI's OMAP platform (OMAP1/2/3/4).
 
-config PLAT_SPEAR
-	bool "ST SPEAr"
-	select ARM_AMBA
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select COMMON_CLK
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
-	help
-	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
-
 config ARCH_VT8500
 	bool "VIA/WonderMedia 85xx"
-	select CPU_ARM926T
-	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
-	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
-	select USE_OF
-	select COMMON_CLK
-	select HAVE_CLK
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
+	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select USE_OF
 	help
 	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
 
 config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform"
+	select ARM_AMBA
+	select ARM_GIC
+	select CLKDEV_LOOKUP
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
-	select ARM_GIC
-	select ARM_AMBA
 	select ICST
 	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
@@ -975,33 +974,33 @@
 
 config ARCH_MULTI_V4
 	bool "ARMv4 based platforms (FA526, StrongARM)"
-	select ARCH_MULTI_V4_V5
 	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
 
 config ARCH_MULTI_V4T
 	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
-	select ARCH_MULTI_V4_V5
 	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
 
 config ARCH_MULTI_V5
 	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
-	select ARCH_MULTI_V4_V5
 	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
 
 config ARCH_MULTI_V4_V5
 	bool
 
 config ARCH_MULTI_V6
 	bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
-	select CPU_V6
 	select ARCH_MULTI_V6_V7
+	select CPU_V6
 
 config ARCH_MULTI_V7
 	bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
-	select CPU_V7
-	select ARCH_VEXPRESS
 	default y
 	select ARCH_MULTI_V6_V7
+	select ARCH_VEXPRESS
+	select CPU_V7
 
 config ARCH_MULTI_V6_V7
 	bool
@@ -1138,9 +1137,9 @@
 config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
-	select COMMON_CLK
 
 config PLAT_ORION_LEGACY
 	bool
@@ -1498,8 +1497,8 @@
 	depends on GENERIC_CLOCKEVENTS
 	depends on HAVE_SMP
 	depends on MMU
-	select USE_GENERIC_SMP_HELPERS
 	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
+	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1858,9 +1857,9 @@
 
 config USE_OF
 	bool "Flattened Device Tree support"
+	select IRQ_DOMAIN
 	select OF
 	select OF_EARLY_FLATTREE
-	select IRQ_DOMAIN
 	help
 	  Include support for flattened device tree machine descriptions.
 
@@ -2142,8 +2141,8 @@
 	bool
 	depends on CPU_FREQ && ARCH_PXA && PXA25x
 	default y
-	select CPU_FREQ_TABLE
 	select CPU_FREQ_DEFAULT_GOV_USERSPACE
+	select CPU_FREQ_TABLE
 
 config CPU_FREQ_S3C
 	bool
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 283fa1d..45ceeb0 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,15 +1,15 @@
 config ARM_GIC
+	bool
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
-	bool
 
 config GIC_NON_BANKED
 	bool
 
 config ARM_VIC
+	bool
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
-	bool
 
 config ARM_VIC_NR
 	int
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index 8a7196c..f70ae17 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -1,6 +1,4 @@
-include include/asm-generic/Kbuild.asm
 
-header-y += hwcap.h
 
 generic-y += auxvec.h
 generic-y += bitsperlong.h
diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h
index 9176261..6ff56ec 100644
--- a/arch/arm/include/asm/hwcap.h
+++ b/arch/arm/include/asm/hwcap.h
@@ -1,31 +1,8 @@
 #ifndef __ASMARM_HWCAP_H
 #define __ASMARM_HWCAP_H
 
-/*
- * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
- */
-#define HWCAP_SWP	(1 << 0)
-#define HWCAP_HALF	(1 << 1)
-#define HWCAP_THUMB	(1 << 2)
-#define HWCAP_26BIT	(1 << 3)	/* Play it safe */
-#define HWCAP_FAST_MULT	(1 << 4)
-#define HWCAP_FPA	(1 << 5)
-#define HWCAP_VFP	(1 << 6)
-#define HWCAP_EDSP	(1 << 7)
-#define HWCAP_JAVA	(1 << 8)
-#define HWCAP_IWMMXT	(1 << 9)
-#define HWCAP_CRUNCH	(1 << 10)
-#define HWCAP_THUMBEE	(1 << 11)
-#define HWCAP_NEON	(1 << 12)
-#define HWCAP_VFPv3	(1 << 13)
-#define HWCAP_VFPv3D16	(1 << 14)
-#define HWCAP_TLS	(1 << 15)
-#define HWCAP_VFPv4	(1 << 16)
-#define HWCAP_IDIVA	(1 << 17)
-#define HWCAP_IDIVT	(1 << 18)
-#define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
+#include <uapi/asm/hwcap.h>
 
-#if defined(__KERNEL__)
 #if !defined(__ASSEMBLY__)
 /*
  * This yields a mask that user programs can use to figure out what
@@ -35,5 +12,3 @@
 extern unsigned int elf_hwcap;
 #endif
 #endif
-
-#endif
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 142d6ae..3d52ee1 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -10,133 +10,12 @@
 #ifndef __ASM_ARM_PTRACE_H
 #define __ASM_ARM_PTRACE_H
 
-#include <asm/hwcap.h>
-
-#define PTRACE_GETREGS		12
-#define PTRACE_SETREGS		13
-#define PTRACE_GETFPREGS	14
-#define PTRACE_SETFPREGS	15
-/* PTRACE_ATTACH is 16 */
-/* PTRACE_DETACH is 17 */
-#define PTRACE_GETWMMXREGS	18
-#define PTRACE_SETWMMXREGS	19
-/* 20 is unused */
-#define PTRACE_OLDSETOPTIONS	21
-#define PTRACE_GET_THREAD_AREA	22
-#define PTRACE_SET_SYSCALL	23
-/* PTRACE_SYSCALL is 24 */
-#define PTRACE_GETCRUNCHREGS	25
-#define PTRACE_SETCRUNCHREGS	26
-#define PTRACE_GETVFPREGS	27
-#define PTRACE_SETVFPREGS	28
-#define PTRACE_GETHBPREGS	29
-#define PTRACE_SETHBPREGS	30
-
-/*
- * PSR bits
- */
-#define USR26_MODE	0x00000000
-#define FIQ26_MODE	0x00000001
-#define IRQ26_MODE	0x00000002
-#define SVC26_MODE	0x00000003
-#define USR_MODE	0x00000010
-#define FIQ_MODE	0x00000011
-#define IRQ_MODE	0x00000012
-#define SVC_MODE	0x00000013
-#define ABT_MODE	0x00000017
-#define HYP_MODE	0x0000001a
-#define UND_MODE	0x0000001b
-#define SYSTEM_MODE	0x0000001f
-#define MODE32_BIT	0x00000010
-#define MODE_MASK	0x0000001f
-#define PSR_T_BIT	0x00000020
-#define PSR_F_BIT	0x00000040
-#define PSR_I_BIT	0x00000080
-#define PSR_A_BIT	0x00000100
-#define PSR_E_BIT	0x00000200
-#define PSR_J_BIT	0x01000000
-#define PSR_Q_BIT	0x08000000
-#define PSR_V_BIT	0x10000000
-#define PSR_C_BIT	0x20000000
-#define PSR_Z_BIT	0x40000000
-#define PSR_N_BIT	0x80000000
-
-/*
- * Groups of PSR bits
- */
-#define PSR_f		0xff000000	/* Flags		*/
-#define PSR_s		0x00ff0000	/* Status		*/
-#define PSR_x		0x0000ff00	/* Extension		*/
-#define PSR_c		0x000000ff	/* Control		*/
-
-/*
- * ARMv7 groups of PSR bits
- */
-#define APSR_MASK	0xf80f0000	/* N, Z, C, V, Q and GE flags */
-#define PSR_ISET_MASK	0x01000010	/* ISA state (J, T) mask */
-#define PSR_IT_MASK	0x0600fc00	/* If-Then execution state mask */
-#define PSR_ENDIAN_MASK	0x00000200	/* Endianness state mask */
-
-/*
- * Default endianness state
- */
-#ifdef CONFIG_CPU_ENDIAN_BE8
-#define PSR_ENDSTATE	PSR_E_BIT
-#else
-#define PSR_ENDSTATE	0
-#endif
-
-/* 
- * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
- * process is located in memory.
- */
-#define PT_TEXT_ADDR		0x10000
-#define PT_DATA_ADDR		0x10004
-#define PT_TEXT_END_ADDR	0x10008
+#include <uapi/asm/ptrace.h>
 
 #ifndef __ASSEMBLY__
-
-/*
- * This struct defines the way the registers are stored on the
- * stack during a system call.  Note that sizeof(struct pt_regs)
- * has to be a multiple of 8.
- */
-#ifndef __KERNEL__
-struct pt_regs {
-	long uregs[18];
-};
-#else /* __KERNEL__ */
 struct pt_regs {
 	unsigned long uregs[18];
 };
-#endif /* __KERNEL__ */
-
-#define ARM_cpsr	uregs[16]
-#define ARM_pc		uregs[15]
-#define ARM_lr		uregs[14]
-#define ARM_sp		uregs[13]
-#define ARM_ip		uregs[12]
-#define ARM_fp		uregs[11]
-#define ARM_r10		uregs[10]
-#define ARM_r9		uregs[9]
-#define ARM_r8		uregs[8]
-#define ARM_r7		uregs[7]
-#define ARM_r6		uregs[6]
-#define ARM_r5		uregs[5]
-#define ARM_r4		uregs[4]
-#define ARM_r3		uregs[3]
-#define ARM_r2		uregs[2]
-#define ARM_r1		uregs[1]
-#define ARM_r0		uregs[0]
-#define ARM_ORIG_r0	uregs[17]
-
-/*
- * The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS
- * and core dumps.
- */
-#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ )
-
-#ifdef __KERNEL__
 
 #define user_mode(regs)	\
 	(((regs)->ARM_cpsr & 0xf) == 0)
@@ -260,9 +139,5 @@
 	(struct pt_regs *)((sp | (THREAD_SIZE - 1)) - 7) - 1;	\
 })
 
-#endif /* __KERNEL__ */
-
 #endif /* __ASSEMBLY__ */
-
 #endif
-
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 24d284a..c50f0560 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -14,176 +14,8 @@
 #ifndef __ASMARM_SETUP_H
 #define __ASMARM_SETUP_H
 
-#include <linux/types.h>
+#include <uapi/asm/setup.h>
 
-#define COMMAND_LINE_SIZE 1024
-
-/* The list ends with an ATAG_NONE node. */
-#define ATAG_NONE	0x00000000
-
-struct tag_header {
-	__u32 size;
-	__u32 tag;
-};
-
-/* The list must start with an ATAG_CORE node */
-#define ATAG_CORE	0x54410001
-
-struct tag_core {
-	__u32 flags;		/* bit 0 = read-only */
-	__u32 pagesize;
-	__u32 rootdev;
-};
-
-/* it is allowed to have multiple ATAG_MEM nodes */
-#define ATAG_MEM	0x54410002
-
-struct tag_mem32 {
-	__u32	size;
-	__u32	start;	/* physical start address */
-};
-
-/* VGA text type displays */
-#define ATAG_VIDEOTEXT	0x54410003
-
-struct tag_videotext {
-	__u8		x;
-	__u8		y;
-	__u16		video_page;
-	__u8		video_mode;
-	__u8		video_cols;
-	__u16		video_ega_bx;
-	__u8		video_lines;
-	__u8		video_isvga;
-	__u16		video_points;
-};
-
-/* describes how the ramdisk will be used in kernel */
-#define ATAG_RAMDISK	0x54410004
-
-struct tag_ramdisk {
-	__u32 flags;	/* bit 0 = load, bit 1 = prompt */
-	__u32 size;	/* decompressed ramdisk size in _kilo_ bytes */
-	__u32 start;	/* starting block of floppy-based RAM disk image */
-};
-
-/* describes where the compressed ramdisk image lives (virtual address) */
-/*
- * this one accidentally used virtual addresses - as such,
- * it's deprecated.
- */
-#define ATAG_INITRD	0x54410005
-
-/* describes where the compressed ramdisk image lives (physical address) */
-#define ATAG_INITRD2	0x54420005
-
-struct tag_initrd {
-	__u32 start;	/* physical start address */
-	__u32 size;	/* size of compressed ramdisk image in bytes */
-};
-
-/* board serial number. "64 bits should be enough for everybody" */
-#define ATAG_SERIAL	0x54410006
-
-struct tag_serialnr {
-	__u32 low;
-	__u32 high;
-};
-
-/* board revision */
-#define ATAG_REVISION	0x54410007
-
-struct tag_revision {
-	__u32 rev;
-};
-
-/* initial values for vesafb-type framebuffers. see struct screen_info
- * in include/linux/tty.h
- */
-#define ATAG_VIDEOLFB	0x54410008
-
-struct tag_videolfb {
-	__u16		lfb_width;
-	__u16		lfb_height;
-	__u16		lfb_depth;
-	__u16		lfb_linelength;
-	__u32		lfb_base;
-	__u32		lfb_size;
-	__u8		red_size;
-	__u8		red_pos;
-	__u8		green_size;
-	__u8		green_pos;
-	__u8		blue_size;
-	__u8		blue_pos;
-	__u8		rsvd_size;
-	__u8		rsvd_pos;
-};
-
-/* command line: \0 terminated string */
-#define ATAG_CMDLINE	0x54410009
-
-struct tag_cmdline {
-	char	cmdline[1];	/* this is the minimum size */
-};
-
-/* acorn RiscPC specific information */
-#define ATAG_ACORN	0x41000101
-
-struct tag_acorn {
-	__u32 memc_control_reg;
-	__u32 vram_pages;
-	__u8 sounddefault;
-	__u8 adfsdrives;
-};
-
-/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
-#define ATAG_MEMCLK	0x41000402
-
-struct tag_memclk {
-	__u32 fmemclk;
-};
-
-struct tag {
-	struct tag_header hdr;
-	union {
-		struct tag_core		core;
-		struct tag_mem32	mem;
-		struct tag_videotext	videotext;
-		struct tag_ramdisk	ramdisk;
-		struct tag_initrd	initrd;
-		struct tag_serialnr	serialnr;
-		struct tag_revision	revision;
-		struct tag_videolfb	videolfb;
-		struct tag_cmdline	cmdline;
-
-		/*
-		 * Acorn specific
-		 */
-		struct tag_acorn	acorn;
-
-		/*
-		 * DC21285 specific
-		 */
-		struct tag_memclk	memclk;
-	} u;
-};
-
-struct tagtable {
-	__u32 tag;
-	int (*parse)(const struct tag *);
-};
-
-#define tag_member_present(tag,member)				\
-	((unsigned long)(&((struct tag *)0L)->member + 1)	\
-		<= (tag)->hdr.size * 4)
-
-#define tag_next(t)	((struct tag *)((__u32 *)(t) + (t)->hdr.size))
-#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
-
-#define for_each_tag(t,base)		\
-	for (t = base; t->hdr.size; t = tag_next(t))
-
-#ifdef __KERNEL__
 
 #define __tag __used __attribute__((__section__(".taglist.init")))
 #define __tagtable(tag, fn) \
@@ -221,6 +53,4 @@
 extern void early_print(const char *str, ...);
 extern void dump_machine_table(void);
 
-#endif  /*  __KERNEL__  */
-
 #endif
diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h
index 43ba0fb..5a7963d 100644
--- a/arch/arm/include/asm/signal.h
+++ b/arch/arm/include/asm/signal.h
@@ -1,12 +1,8 @@
 #ifndef _ASMARM_SIGNAL_H
 #define _ASMARM_SIGNAL_H
 
-#include <linux/types.h>
+#include <uapi/asm/signal.h>
 
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
 /* Most things should be clean enough to redefine this at will, if care
    is taken to make libc match.  */
 
@@ -20,100 +16,6 @@
 	unsigned long sig[_NSIG_WORDS];
 } sigset_t;
 
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-#define SIGSWI		32
-
-/*
- * SA_FLAGS values:
- *
- * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
- * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
- * SA_SIGINFO		deliver the signal with SIGINFO structs
- * SA_THIRTYTWO		delivers the signal in 32-bit mode, even if the task 
- *			is running in 26-bit.
- * SA_ONSTACK		allows alternate signal stacks (see sigaltstack(2)).
- * SA_RESTART		flag to get restarting signals (which were the default long ago)
- * SA_NODEFER		prevents the current signal from being masked in the handler.
- * SA_RESETHAND		clears the handler when the signal is delivered.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_THIRTYTWO	0x02000000
-#define SA_RESTORER	0x04000000
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-
-/* 
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal-defs.h>
-
-#ifdef __KERNEL__
 struct old_sigaction {
 	__sighandler_t sa_handler;
 	old_sigset_t sa_mask;
@@ -132,33 +34,6 @@
 	struct sigaction sa;
 };
 
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
 #include <asm/sigcontext.h>
 #define ptrace_signal_deliver(regs, cookie) do { } while (0)
 #endif
-
-#endif
diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h
index b859d82..537fc9b 100644
--- a/arch/arm/include/asm/swab.h
+++ b/arch/arm/include/asm/swab.h
@@ -15,14 +15,8 @@
 #ifndef __ASM_ARM_SWAB_H
 #define __ASM_ARM_SWAB_H
 
-#include <linux/compiler.h>
-#include <linux/types.h>
+#include <uapi/asm/swab.h>
 
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __SWAB_64_THRU_32__
-#endif
-
-#if defined(__KERNEL__)
 #if __LINUX_ARM_ARCH__ >= 6
 
 static inline __attribute_const__ __u32 __arch_swahb32(__u32 x)
@@ -42,32 +36,3 @@
 
 #endif
 #endif
-
-#if !defined(__KERNEL__) || __LINUX_ARM_ARCH__ < 6
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
-{
-	__u32 t;
-
-#ifndef __thumb__
-	if (!__builtin_constant_p(x)) {
-		/*
-		 * The compiler needs a bit of a hint here to always do the
-		 * right thing and not screw it up to different degrees
-		 * depending on the gcc version.
-		 */
-		asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
-	} else
-#endif
-		t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
-
-	x = (x << 24) | (x >> 8);		/* mov r0,r0,ror #8      */
-	t &= ~0x00FF0000;			/* bic r1,r1,#0x00FF0000 */
-	x ^= (t >> 8);				/* eor r0,r0,r1,lsr #8   */
-
-	return x;
-}
-#define __arch_swab32 __arch_swab32
-
-#endif
-
-#endif
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 91819ad..8f60b6e 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -13,447 +13,10 @@
 #ifndef __ASM_ARM_UNISTD_H
 #define __ASM_ARM_UNISTD_H
 
-#define __NR_OABI_SYSCALL_BASE	0x900000
+#include <uapi/asm/unistd.h>
 
-#if defined(__thumb__) || defined(__ARM_EABI__)
-#define __NR_SYSCALL_BASE	0
-#else
-#define __NR_SYSCALL_BASE	__NR_OABI_SYSCALL_BASE
-#endif
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall		(__NR_SYSCALL_BASE+  0)
-#define __NR_exit			(__NR_SYSCALL_BASE+  1)
-#define __NR_fork			(__NR_SYSCALL_BASE+  2)
-#define __NR_read			(__NR_SYSCALL_BASE+  3)
-#define __NR_write			(__NR_SYSCALL_BASE+  4)
-#define __NR_open			(__NR_SYSCALL_BASE+  5)
-#define __NR_close			(__NR_SYSCALL_BASE+  6)
-					/* 7 was sys_waitpid */
-#define __NR_creat			(__NR_SYSCALL_BASE+  8)
-#define __NR_link			(__NR_SYSCALL_BASE+  9)
-#define __NR_unlink			(__NR_SYSCALL_BASE+ 10)
-#define __NR_execve			(__NR_SYSCALL_BASE+ 11)
-#define __NR_chdir			(__NR_SYSCALL_BASE+ 12)
-#define __NR_time			(__NR_SYSCALL_BASE+ 13)
-#define __NR_mknod			(__NR_SYSCALL_BASE+ 14)
-#define __NR_chmod			(__NR_SYSCALL_BASE+ 15)
-#define __NR_lchown			(__NR_SYSCALL_BASE+ 16)
-					/* 17 was sys_break */
-					/* 18 was sys_stat */
-#define __NR_lseek			(__NR_SYSCALL_BASE+ 19)
-#define __NR_getpid			(__NR_SYSCALL_BASE+ 20)
-#define __NR_mount			(__NR_SYSCALL_BASE+ 21)
-#define __NR_umount			(__NR_SYSCALL_BASE+ 22)
-#define __NR_setuid			(__NR_SYSCALL_BASE+ 23)
-#define __NR_getuid			(__NR_SYSCALL_BASE+ 24)
-#define __NR_stime			(__NR_SYSCALL_BASE+ 25)
-#define __NR_ptrace			(__NR_SYSCALL_BASE+ 26)
-#define __NR_alarm			(__NR_SYSCALL_BASE+ 27)
-					/* 28 was sys_fstat */
-#define __NR_pause			(__NR_SYSCALL_BASE+ 29)
-#define __NR_utime			(__NR_SYSCALL_BASE+ 30)
-					/* 31 was sys_stty */
-					/* 32 was sys_gtty */
-#define __NR_access			(__NR_SYSCALL_BASE+ 33)
-#define __NR_nice			(__NR_SYSCALL_BASE+ 34)
-					/* 35 was sys_ftime */
-#define __NR_sync			(__NR_SYSCALL_BASE+ 36)
-#define __NR_kill			(__NR_SYSCALL_BASE+ 37)
-#define __NR_rename			(__NR_SYSCALL_BASE+ 38)
-#define __NR_mkdir			(__NR_SYSCALL_BASE+ 39)
-#define __NR_rmdir			(__NR_SYSCALL_BASE+ 40)
-#define __NR_dup			(__NR_SYSCALL_BASE+ 41)
-#define __NR_pipe			(__NR_SYSCALL_BASE+ 42)
-#define __NR_times			(__NR_SYSCALL_BASE+ 43)
-					/* 44 was sys_prof */
-#define __NR_brk			(__NR_SYSCALL_BASE+ 45)
-#define __NR_setgid			(__NR_SYSCALL_BASE+ 46)
-#define __NR_getgid			(__NR_SYSCALL_BASE+ 47)
-					/* 48 was sys_signal */
-#define __NR_geteuid			(__NR_SYSCALL_BASE+ 49)
-#define __NR_getegid			(__NR_SYSCALL_BASE+ 50)
-#define __NR_acct			(__NR_SYSCALL_BASE+ 51)
-#define __NR_umount2			(__NR_SYSCALL_BASE+ 52)
-					/* 53 was sys_lock */
-#define __NR_ioctl			(__NR_SYSCALL_BASE+ 54)
-#define __NR_fcntl			(__NR_SYSCALL_BASE+ 55)
-					/* 56 was sys_mpx */
-#define __NR_setpgid			(__NR_SYSCALL_BASE+ 57)
-					/* 58 was sys_ulimit */
-					/* 59 was sys_olduname */
-#define __NR_umask			(__NR_SYSCALL_BASE+ 60)
-#define __NR_chroot			(__NR_SYSCALL_BASE+ 61)
-#define __NR_ustat			(__NR_SYSCALL_BASE+ 62)
-#define __NR_dup2			(__NR_SYSCALL_BASE+ 63)
-#define __NR_getppid			(__NR_SYSCALL_BASE+ 64)
-#define __NR_getpgrp			(__NR_SYSCALL_BASE+ 65)
-#define __NR_setsid			(__NR_SYSCALL_BASE+ 66)
-#define __NR_sigaction			(__NR_SYSCALL_BASE+ 67)
-					/* 68 was sys_sgetmask */
-					/* 69 was sys_ssetmask */
-#define __NR_setreuid			(__NR_SYSCALL_BASE+ 70)
-#define __NR_setregid			(__NR_SYSCALL_BASE+ 71)
-#define __NR_sigsuspend			(__NR_SYSCALL_BASE+ 72)
-#define __NR_sigpending			(__NR_SYSCALL_BASE+ 73)
-#define __NR_sethostname		(__NR_SYSCALL_BASE+ 74)
-#define __NR_setrlimit			(__NR_SYSCALL_BASE+ 75)
-#define __NR_getrlimit			(__NR_SYSCALL_BASE+ 76)	/* Back compat 2GB limited rlimit */
-#define __NR_getrusage			(__NR_SYSCALL_BASE+ 77)
-#define __NR_gettimeofday		(__NR_SYSCALL_BASE+ 78)
-#define __NR_settimeofday		(__NR_SYSCALL_BASE+ 79)
-#define __NR_getgroups			(__NR_SYSCALL_BASE+ 80)
-#define __NR_setgroups			(__NR_SYSCALL_BASE+ 81)
-#define __NR_select			(__NR_SYSCALL_BASE+ 82)
-#define __NR_symlink			(__NR_SYSCALL_BASE+ 83)
-					/* 84 was sys_lstat */
-#define __NR_readlink			(__NR_SYSCALL_BASE+ 85)
-#define __NR_uselib			(__NR_SYSCALL_BASE+ 86)
-#define __NR_swapon			(__NR_SYSCALL_BASE+ 87)
-#define __NR_reboot			(__NR_SYSCALL_BASE+ 88)
-#define __NR_readdir			(__NR_SYSCALL_BASE+ 89)
-#define __NR_mmap			(__NR_SYSCALL_BASE+ 90)
-#define __NR_munmap			(__NR_SYSCALL_BASE+ 91)
-#define __NR_truncate			(__NR_SYSCALL_BASE+ 92)
-#define __NR_ftruncate			(__NR_SYSCALL_BASE+ 93)
-#define __NR_fchmod			(__NR_SYSCALL_BASE+ 94)
-#define __NR_fchown			(__NR_SYSCALL_BASE+ 95)
-#define __NR_getpriority		(__NR_SYSCALL_BASE+ 96)
-#define __NR_setpriority		(__NR_SYSCALL_BASE+ 97)
-					/* 98 was sys_profil */
-#define __NR_statfs			(__NR_SYSCALL_BASE+ 99)
-#define __NR_fstatfs			(__NR_SYSCALL_BASE+100)
-					/* 101 was sys_ioperm */
-#define __NR_socketcall			(__NR_SYSCALL_BASE+102)
-#define __NR_syslog			(__NR_SYSCALL_BASE+103)
-#define __NR_setitimer			(__NR_SYSCALL_BASE+104)
-#define __NR_getitimer			(__NR_SYSCALL_BASE+105)
-#define __NR_stat			(__NR_SYSCALL_BASE+106)
-#define __NR_lstat			(__NR_SYSCALL_BASE+107)
-#define __NR_fstat			(__NR_SYSCALL_BASE+108)
-					/* 109 was sys_uname */
-					/* 110 was sys_iopl */
-#define __NR_vhangup			(__NR_SYSCALL_BASE+111)
-					/* 112 was sys_idle */
-#define __NR_syscall			(__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
-#define __NR_wait4			(__NR_SYSCALL_BASE+114)
-#define __NR_swapoff			(__NR_SYSCALL_BASE+115)
-#define __NR_sysinfo			(__NR_SYSCALL_BASE+116)
-#define __NR_ipc			(__NR_SYSCALL_BASE+117)
-#define __NR_fsync			(__NR_SYSCALL_BASE+118)
-#define __NR_sigreturn			(__NR_SYSCALL_BASE+119)
-#define __NR_clone			(__NR_SYSCALL_BASE+120)
-#define __NR_setdomainname		(__NR_SYSCALL_BASE+121)
-#define __NR_uname			(__NR_SYSCALL_BASE+122)
-					/* 123 was sys_modify_ldt */
-#define __NR_adjtimex			(__NR_SYSCALL_BASE+124)
-#define __NR_mprotect			(__NR_SYSCALL_BASE+125)
-#define __NR_sigprocmask		(__NR_SYSCALL_BASE+126)
-					/* 127 was sys_create_module */
-#define __NR_init_module		(__NR_SYSCALL_BASE+128)
-#define __NR_delete_module		(__NR_SYSCALL_BASE+129)
-					/* 130 was sys_get_kernel_syms */
-#define __NR_quotactl			(__NR_SYSCALL_BASE+131)
-#define __NR_getpgid			(__NR_SYSCALL_BASE+132)
-#define __NR_fchdir			(__NR_SYSCALL_BASE+133)
-#define __NR_bdflush			(__NR_SYSCALL_BASE+134)
-#define __NR_sysfs			(__NR_SYSCALL_BASE+135)
-#define __NR_personality		(__NR_SYSCALL_BASE+136)
-					/* 137 was sys_afs_syscall */
-#define __NR_setfsuid			(__NR_SYSCALL_BASE+138)
-#define __NR_setfsgid			(__NR_SYSCALL_BASE+139)
-#define __NR__llseek			(__NR_SYSCALL_BASE+140)
-#define __NR_getdents			(__NR_SYSCALL_BASE+141)
-#define __NR__newselect			(__NR_SYSCALL_BASE+142)
-#define __NR_flock			(__NR_SYSCALL_BASE+143)
-#define __NR_msync			(__NR_SYSCALL_BASE+144)
-#define __NR_readv			(__NR_SYSCALL_BASE+145)
-#define __NR_writev			(__NR_SYSCALL_BASE+146)
-#define __NR_getsid			(__NR_SYSCALL_BASE+147)
-#define __NR_fdatasync			(__NR_SYSCALL_BASE+148)
-#define __NR__sysctl			(__NR_SYSCALL_BASE+149)
-#define __NR_mlock			(__NR_SYSCALL_BASE+150)
-#define __NR_munlock			(__NR_SYSCALL_BASE+151)
-#define __NR_mlockall			(__NR_SYSCALL_BASE+152)
-#define __NR_munlockall			(__NR_SYSCALL_BASE+153)
-#define __NR_sched_setparam		(__NR_SYSCALL_BASE+154)
-#define __NR_sched_getparam		(__NR_SYSCALL_BASE+155)
-#define __NR_sched_setscheduler		(__NR_SYSCALL_BASE+156)
-#define __NR_sched_getscheduler		(__NR_SYSCALL_BASE+157)
-#define __NR_sched_yield		(__NR_SYSCALL_BASE+158)
-#define __NR_sched_get_priority_max	(__NR_SYSCALL_BASE+159)
-#define __NR_sched_get_priority_min	(__NR_SYSCALL_BASE+160)
-#define __NR_sched_rr_get_interval	(__NR_SYSCALL_BASE+161)
-#define __NR_nanosleep			(__NR_SYSCALL_BASE+162)
-#define __NR_mremap			(__NR_SYSCALL_BASE+163)
-#define __NR_setresuid			(__NR_SYSCALL_BASE+164)
-#define __NR_getresuid			(__NR_SYSCALL_BASE+165)
-					/* 166 was sys_vm86 */
-					/* 167 was sys_query_module */
-#define __NR_poll			(__NR_SYSCALL_BASE+168)
-#define __NR_nfsservctl			(__NR_SYSCALL_BASE+169)
-#define __NR_setresgid			(__NR_SYSCALL_BASE+170)
-#define __NR_getresgid			(__NR_SYSCALL_BASE+171)
-#define __NR_prctl			(__NR_SYSCALL_BASE+172)
-#define __NR_rt_sigreturn		(__NR_SYSCALL_BASE+173)
-#define __NR_rt_sigaction		(__NR_SYSCALL_BASE+174)
-#define __NR_rt_sigprocmask		(__NR_SYSCALL_BASE+175)
-#define __NR_rt_sigpending		(__NR_SYSCALL_BASE+176)
-#define __NR_rt_sigtimedwait		(__NR_SYSCALL_BASE+177)
-#define __NR_rt_sigqueueinfo		(__NR_SYSCALL_BASE+178)
-#define __NR_rt_sigsuspend		(__NR_SYSCALL_BASE+179)
-#define __NR_pread64			(__NR_SYSCALL_BASE+180)
-#define __NR_pwrite64			(__NR_SYSCALL_BASE+181)
-#define __NR_chown			(__NR_SYSCALL_BASE+182)
-#define __NR_getcwd			(__NR_SYSCALL_BASE+183)
-#define __NR_capget			(__NR_SYSCALL_BASE+184)
-#define __NR_capset			(__NR_SYSCALL_BASE+185)
-#define __NR_sigaltstack		(__NR_SYSCALL_BASE+186)
-#define __NR_sendfile			(__NR_SYSCALL_BASE+187)
-					/* 188 reserved */
-					/* 189 reserved */
-#define __NR_vfork			(__NR_SYSCALL_BASE+190)
-#define __NR_ugetrlimit			(__NR_SYSCALL_BASE+191)	/* SuS compliant getrlimit */
-#define __NR_mmap2			(__NR_SYSCALL_BASE+192)
-#define __NR_truncate64			(__NR_SYSCALL_BASE+193)
-#define __NR_ftruncate64		(__NR_SYSCALL_BASE+194)
-#define __NR_stat64			(__NR_SYSCALL_BASE+195)
-#define __NR_lstat64			(__NR_SYSCALL_BASE+196)
-#define __NR_fstat64			(__NR_SYSCALL_BASE+197)
-#define __NR_lchown32			(__NR_SYSCALL_BASE+198)
-#define __NR_getuid32			(__NR_SYSCALL_BASE+199)
-#define __NR_getgid32			(__NR_SYSCALL_BASE+200)
-#define __NR_geteuid32			(__NR_SYSCALL_BASE+201)
-#define __NR_getegid32			(__NR_SYSCALL_BASE+202)
-#define __NR_setreuid32			(__NR_SYSCALL_BASE+203)
-#define __NR_setregid32			(__NR_SYSCALL_BASE+204)
-#define __NR_getgroups32		(__NR_SYSCALL_BASE+205)
-#define __NR_setgroups32		(__NR_SYSCALL_BASE+206)
-#define __NR_fchown32			(__NR_SYSCALL_BASE+207)
-#define __NR_setresuid32		(__NR_SYSCALL_BASE+208)
-#define __NR_getresuid32		(__NR_SYSCALL_BASE+209)
-#define __NR_setresgid32		(__NR_SYSCALL_BASE+210)
-#define __NR_getresgid32		(__NR_SYSCALL_BASE+211)
-#define __NR_chown32			(__NR_SYSCALL_BASE+212)
-#define __NR_setuid32			(__NR_SYSCALL_BASE+213)
-#define __NR_setgid32			(__NR_SYSCALL_BASE+214)
-#define __NR_setfsuid32			(__NR_SYSCALL_BASE+215)
-#define __NR_setfsgid32			(__NR_SYSCALL_BASE+216)
-#define __NR_getdents64			(__NR_SYSCALL_BASE+217)
-#define __NR_pivot_root			(__NR_SYSCALL_BASE+218)
-#define __NR_mincore			(__NR_SYSCALL_BASE+219)
-#define __NR_madvise			(__NR_SYSCALL_BASE+220)
-#define __NR_fcntl64			(__NR_SYSCALL_BASE+221)
-					/* 222 for tux */
-					/* 223 is unused */
-#define __NR_gettid			(__NR_SYSCALL_BASE+224)
-#define __NR_readahead			(__NR_SYSCALL_BASE+225)
-#define __NR_setxattr			(__NR_SYSCALL_BASE+226)
-#define __NR_lsetxattr			(__NR_SYSCALL_BASE+227)
-#define __NR_fsetxattr			(__NR_SYSCALL_BASE+228)
-#define __NR_getxattr			(__NR_SYSCALL_BASE+229)
-#define __NR_lgetxattr			(__NR_SYSCALL_BASE+230)
-#define __NR_fgetxattr			(__NR_SYSCALL_BASE+231)
-#define __NR_listxattr			(__NR_SYSCALL_BASE+232)
-#define __NR_llistxattr			(__NR_SYSCALL_BASE+233)
-#define __NR_flistxattr			(__NR_SYSCALL_BASE+234)
-#define __NR_removexattr		(__NR_SYSCALL_BASE+235)
-#define __NR_lremovexattr		(__NR_SYSCALL_BASE+236)
-#define __NR_fremovexattr		(__NR_SYSCALL_BASE+237)
-#define __NR_tkill			(__NR_SYSCALL_BASE+238)
-#define __NR_sendfile64			(__NR_SYSCALL_BASE+239)
-#define __NR_futex			(__NR_SYSCALL_BASE+240)
-#define __NR_sched_setaffinity		(__NR_SYSCALL_BASE+241)
-#define __NR_sched_getaffinity		(__NR_SYSCALL_BASE+242)
-#define __NR_io_setup			(__NR_SYSCALL_BASE+243)
-#define __NR_io_destroy			(__NR_SYSCALL_BASE+244)
-#define __NR_io_getevents		(__NR_SYSCALL_BASE+245)
-#define __NR_io_submit			(__NR_SYSCALL_BASE+246)
-#define __NR_io_cancel			(__NR_SYSCALL_BASE+247)
-#define __NR_exit_group			(__NR_SYSCALL_BASE+248)
-#define __NR_lookup_dcookie		(__NR_SYSCALL_BASE+249)
-#define __NR_epoll_create		(__NR_SYSCALL_BASE+250)
-#define __NR_epoll_ctl			(__NR_SYSCALL_BASE+251)
-#define __NR_epoll_wait			(__NR_SYSCALL_BASE+252)
-#define __NR_remap_file_pages		(__NR_SYSCALL_BASE+253)
-					/* 254 for set_thread_area */
-					/* 255 for get_thread_area */
-#define __NR_set_tid_address		(__NR_SYSCALL_BASE+256)
-#define __NR_timer_create		(__NR_SYSCALL_BASE+257)
-#define __NR_timer_settime		(__NR_SYSCALL_BASE+258)
-#define __NR_timer_gettime		(__NR_SYSCALL_BASE+259)
-#define __NR_timer_getoverrun		(__NR_SYSCALL_BASE+260)
-#define __NR_timer_delete		(__NR_SYSCALL_BASE+261)
-#define __NR_clock_settime		(__NR_SYSCALL_BASE+262)
-#define __NR_clock_gettime		(__NR_SYSCALL_BASE+263)
-#define __NR_clock_getres		(__NR_SYSCALL_BASE+264)
-#define __NR_clock_nanosleep		(__NR_SYSCALL_BASE+265)
-#define __NR_statfs64			(__NR_SYSCALL_BASE+266)
-#define __NR_fstatfs64			(__NR_SYSCALL_BASE+267)
-#define __NR_tgkill			(__NR_SYSCALL_BASE+268)
-#define __NR_utimes			(__NR_SYSCALL_BASE+269)
-#define __NR_arm_fadvise64_64		(__NR_SYSCALL_BASE+270)
-#define __NR_pciconfig_iobase		(__NR_SYSCALL_BASE+271)
-#define __NR_pciconfig_read		(__NR_SYSCALL_BASE+272)
-#define __NR_pciconfig_write		(__NR_SYSCALL_BASE+273)
-#define __NR_mq_open			(__NR_SYSCALL_BASE+274)
-#define __NR_mq_unlink			(__NR_SYSCALL_BASE+275)
-#define __NR_mq_timedsend		(__NR_SYSCALL_BASE+276)
-#define __NR_mq_timedreceive		(__NR_SYSCALL_BASE+277)
-#define __NR_mq_notify			(__NR_SYSCALL_BASE+278)
-#define __NR_mq_getsetattr		(__NR_SYSCALL_BASE+279)
-#define __NR_waitid			(__NR_SYSCALL_BASE+280)
-#define __NR_socket			(__NR_SYSCALL_BASE+281)
-#define __NR_bind			(__NR_SYSCALL_BASE+282)
-#define __NR_connect			(__NR_SYSCALL_BASE+283)
-#define __NR_listen			(__NR_SYSCALL_BASE+284)
-#define __NR_accept			(__NR_SYSCALL_BASE+285)
-#define __NR_getsockname		(__NR_SYSCALL_BASE+286)
-#define __NR_getpeername		(__NR_SYSCALL_BASE+287)
-#define __NR_socketpair			(__NR_SYSCALL_BASE+288)
-#define __NR_send			(__NR_SYSCALL_BASE+289)
-#define __NR_sendto			(__NR_SYSCALL_BASE+290)
-#define __NR_recv			(__NR_SYSCALL_BASE+291)
-#define __NR_recvfrom			(__NR_SYSCALL_BASE+292)
-#define __NR_shutdown			(__NR_SYSCALL_BASE+293)
-#define __NR_setsockopt			(__NR_SYSCALL_BASE+294)
-#define __NR_getsockopt			(__NR_SYSCALL_BASE+295)
-#define __NR_sendmsg			(__NR_SYSCALL_BASE+296)
-#define __NR_recvmsg			(__NR_SYSCALL_BASE+297)
-#define __NR_semop			(__NR_SYSCALL_BASE+298)
-#define __NR_semget			(__NR_SYSCALL_BASE+299)
-#define __NR_semctl			(__NR_SYSCALL_BASE+300)
-#define __NR_msgsnd			(__NR_SYSCALL_BASE+301)
-#define __NR_msgrcv			(__NR_SYSCALL_BASE+302)
-#define __NR_msgget			(__NR_SYSCALL_BASE+303)
-#define __NR_msgctl			(__NR_SYSCALL_BASE+304)
-#define __NR_shmat			(__NR_SYSCALL_BASE+305)
-#define __NR_shmdt			(__NR_SYSCALL_BASE+306)
-#define __NR_shmget			(__NR_SYSCALL_BASE+307)
-#define __NR_shmctl			(__NR_SYSCALL_BASE+308)
-#define __NR_add_key			(__NR_SYSCALL_BASE+309)
-#define __NR_request_key		(__NR_SYSCALL_BASE+310)
-#define __NR_keyctl			(__NR_SYSCALL_BASE+311)
-#define __NR_semtimedop			(__NR_SYSCALL_BASE+312)
-#define __NR_vserver			(__NR_SYSCALL_BASE+313)
-#define __NR_ioprio_set			(__NR_SYSCALL_BASE+314)
-#define __NR_ioprio_get			(__NR_SYSCALL_BASE+315)
-#define __NR_inotify_init		(__NR_SYSCALL_BASE+316)
-#define __NR_inotify_add_watch		(__NR_SYSCALL_BASE+317)
-#define __NR_inotify_rm_watch		(__NR_SYSCALL_BASE+318)
-#define __NR_mbind			(__NR_SYSCALL_BASE+319)
-#define __NR_get_mempolicy		(__NR_SYSCALL_BASE+320)
-#define __NR_set_mempolicy		(__NR_SYSCALL_BASE+321)
-#define __NR_openat			(__NR_SYSCALL_BASE+322)
-#define __NR_mkdirat			(__NR_SYSCALL_BASE+323)
-#define __NR_mknodat			(__NR_SYSCALL_BASE+324)
-#define __NR_fchownat			(__NR_SYSCALL_BASE+325)
-#define __NR_futimesat			(__NR_SYSCALL_BASE+326)
-#define __NR_fstatat64			(__NR_SYSCALL_BASE+327)
-#define __NR_unlinkat			(__NR_SYSCALL_BASE+328)
-#define __NR_renameat			(__NR_SYSCALL_BASE+329)
-#define __NR_linkat			(__NR_SYSCALL_BASE+330)
-#define __NR_symlinkat			(__NR_SYSCALL_BASE+331)
-#define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
-#define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
-#define __NR_faccessat			(__NR_SYSCALL_BASE+334)
-#define __NR_pselect6			(__NR_SYSCALL_BASE+335)
-#define __NR_ppoll			(__NR_SYSCALL_BASE+336)
-#define __NR_unshare			(__NR_SYSCALL_BASE+337)
-#define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
-#define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
-#define __NR_splice			(__NR_SYSCALL_BASE+340)
-#define __NR_arm_sync_file_range	(__NR_SYSCALL_BASE+341)
-#define __NR_sync_file_range2		__NR_arm_sync_file_range
-#define __NR_tee			(__NR_SYSCALL_BASE+342)
-#define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
-#define __NR_move_pages			(__NR_SYSCALL_BASE+344)
-#define __NR_getcpu			(__NR_SYSCALL_BASE+345)
-#define __NR_epoll_pwait		(__NR_SYSCALL_BASE+346)
-#define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
-#define __NR_utimensat			(__NR_SYSCALL_BASE+348)
-#define __NR_signalfd			(__NR_SYSCALL_BASE+349)
-#define __NR_timerfd_create		(__NR_SYSCALL_BASE+350)
-#define __NR_eventfd			(__NR_SYSCALL_BASE+351)
-#define __NR_fallocate			(__NR_SYSCALL_BASE+352)
-#define __NR_timerfd_settime		(__NR_SYSCALL_BASE+353)
-#define __NR_timerfd_gettime		(__NR_SYSCALL_BASE+354)
-#define __NR_signalfd4			(__NR_SYSCALL_BASE+355)
-#define __NR_eventfd2			(__NR_SYSCALL_BASE+356)
-#define __NR_epoll_create1		(__NR_SYSCALL_BASE+357)
-#define __NR_dup3			(__NR_SYSCALL_BASE+358)
-#define __NR_pipe2			(__NR_SYSCALL_BASE+359)
-#define __NR_inotify_init1		(__NR_SYSCALL_BASE+360)
-#define __NR_preadv			(__NR_SYSCALL_BASE+361)
-#define __NR_pwritev			(__NR_SYSCALL_BASE+362)
-#define __NR_rt_tgsigqueueinfo		(__NR_SYSCALL_BASE+363)
-#define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
-#define __NR_recvmmsg			(__NR_SYSCALL_BASE+365)
-#define __NR_accept4			(__NR_SYSCALL_BASE+366)
-#define __NR_fanotify_init		(__NR_SYSCALL_BASE+367)
-#define __NR_fanotify_mark		(__NR_SYSCALL_BASE+368)
-#define __NR_prlimit64			(__NR_SYSCALL_BASE+369)
-#define __NR_name_to_handle_at		(__NR_SYSCALL_BASE+370)
-#define __NR_open_by_handle_at		(__NR_SYSCALL_BASE+371)
-#define __NR_clock_adjtime		(__NR_SYSCALL_BASE+372)
-#define __NR_syncfs			(__NR_SYSCALL_BASE+373)
-#define __NR_sendmmsg			(__NR_SYSCALL_BASE+374)
-#define __NR_setns			(__NR_SYSCALL_BASE+375)
-#define __NR_process_vm_readv		(__NR_SYSCALL_BASE+376)
-#define __NR_process_vm_writev		(__NR_SYSCALL_BASE+377)
-					/* 378 for kcmp */
-
-/*
- * This may need to be greater than __NR_last_syscall+1 in order to
- * account for the padding in the syscall table
- */
-#ifdef __KERNEL__
 #define __NR_syscalls  (380)
-#endif /* __KERNEL__ */
-
-/*
- * The following SWIs are ARM private.
- */
-#define __ARM_NR_BASE			(__NR_SYSCALL_BASE+0x0f0000)
-#define __ARM_NR_breakpoint		(__ARM_NR_BASE+1)
-#define __ARM_NR_cacheflush		(__ARM_NR_BASE+2)
-#define __ARM_NR_usr26			(__ARM_NR_BASE+3)
-#define __ARM_NR_usr32			(__ARM_NR_BASE+4)
-#define __ARM_NR_set_tls		(__ARM_NR_BASE+5)
-
-/*
- * *NOTE*: This is a ghost syscall private to the kernel.  Only the
- * __kuser_cmpxchg code in entry-armv.S should be aware of its
- * existence.  Don't ever use this from user code.
- */
-#ifdef __KERNEL__
 #define __ARM_NR_cmpxchg		(__ARM_NR_BASE+0x00fff0)
-#endif
-
-/*
- * The following syscalls are obsolete and no longer available for EABI.
- */
-#if !defined(__KERNEL__)
-#if defined(__ARM_EABI__)
-#undef __NR_time
-#undef __NR_umount
-#undef __NR_stime
-#undef __NR_alarm
-#undef __NR_utime
-#undef __NR_getrlimit
-#undef __NR_select
-#undef __NR_readdir
-#undef __NR_mmap
-#undef __NR_socketcall
-#undef __NR_syscall
-#undef __NR_ipc
-#endif
-#endif
-
-#ifdef __KERNEL__
 
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_GETHOSTNAME
@@ -495,5 +58,4 @@
 #define __IGNORE_migrate_pages
 #define __IGNORE_kcmp
 
-#endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */
diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild
index baebb3d..47bcb2d 100644
--- a/arch/arm/include/uapi/asm/Kbuild
+++ b/arch/arm/include/uapi/asm/Kbuild
@@ -1,3 +1,19 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+header-y += a.out.h
+header-y += byteorder.h
+header-y += fcntl.h
+header-y += hwcap.h
+header-y += ioctls.h
+header-y += kvm_para.h
+header-y += mman.h
+header-y += posix_types.h
+header-y += ptrace.h
+header-y += setup.h
+header-y += sigcontext.h
+header-y += signal.h
+header-y += stat.h
+header-y += statfs.h
+header-y += swab.h
+header-y += unistd.h
diff --git a/arch/arm/include/asm/a.out.h b/arch/arm/include/uapi/asm/a.out.h
similarity index 100%
rename from arch/arm/include/asm/a.out.h
rename to arch/arm/include/uapi/asm/a.out.h
diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/uapi/asm/byteorder.h
similarity index 100%
rename from arch/arm/include/asm/byteorder.h
rename to arch/arm/include/uapi/asm/byteorder.h
diff --git a/arch/arm/include/asm/fcntl.h b/arch/arm/include/uapi/asm/fcntl.h
similarity index 100%
rename from arch/arm/include/asm/fcntl.h
rename to arch/arm/include/uapi/asm/fcntl.h
diff --git a/arch/arm/include/uapi/asm/hwcap.h b/arch/arm/include/uapi/asm/hwcap.h
new file mode 100644
index 0000000..f254f65
--- /dev/null
+++ b/arch/arm/include/uapi/asm/hwcap.h
@@ -0,0 +1,29 @@
+#ifndef _UAPI__ASMARM_HWCAP_H
+#define _UAPI__ASMARM_HWCAP_H
+
+/*
+ * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
+ */
+#define HWCAP_SWP	(1 << 0)
+#define HWCAP_HALF	(1 << 1)
+#define HWCAP_THUMB	(1 << 2)
+#define HWCAP_26BIT	(1 << 3)	/* Play it safe */
+#define HWCAP_FAST_MULT	(1 << 4)
+#define HWCAP_FPA	(1 << 5)
+#define HWCAP_VFP	(1 << 6)
+#define HWCAP_EDSP	(1 << 7)
+#define HWCAP_JAVA	(1 << 8)
+#define HWCAP_IWMMXT	(1 << 9)
+#define HWCAP_CRUNCH	(1 << 10)
+#define HWCAP_THUMBEE	(1 << 11)
+#define HWCAP_NEON	(1 << 12)
+#define HWCAP_VFPv3	(1 << 13)
+#define HWCAP_VFPv3D16	(1 << 14)
+#define HWCAP_TLS	(1 << 15)
+#define HWCAP_VFPv4	(1 << 16)
+#define HWCAP_IDIVA	(1 << 17)
+#define HWCAP_IDIVT	(1 << 18)
+#define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
+
+
+#endif /* _UAPI__ASMARM_HWCAP_H */
diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/uapi/asm/ioctls.h
similarity index 100%
rename from arch/arm/include/asm/ioctls.h
rename to arch/arm/include/uapi/asm/ioctls.h
diff --git a/arch/arm/include/asm/kvm_para.h b/arch/arm/include/uapi/asm/kvm_para.h
similarity index 100%
rename from arch/arm/include/asm/kvm_para.h
rename to arch/arm/include/uapi/asm/kvm_para.h
diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/uapi/asm/mman.h
similarity index 100%
rename from arch/arm/include/asm/mman.h
rename to arch/arm/include/uapi/asm/mman.h
diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/uapi/asm/posix_types.h
similarity index 100%
rename from arch/arm/include/asm/posix_types.h
rename to arch/arm/include/uapi/asm/posix_types.h
diff --git a/arch/arm/include/uapi/asm/ptrace.h b/arch/arm/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..96ee092
--- /dev/null
+++ b/arch/arm/include/uapi/asm/ptrace.h
@@ -0,0 +1,138 @@
+/*
+ *  arch/arm/include/asm/ptrace.h
+ *
+ *  Copyright (C) 1996-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _UAPI__ASM_ARM_PTRACE_H
+#define _UAPI__ASM_ARM_PTRACE_H
+
+#include <asm/hwcap.h>
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS	14
+#define PTRACE_SETFPREGS	15
+/* PTRACE_ATTACH is 16 */
+/* PTRACE_DETACH is 17 */
+#define PTRACE_GETWMMXREGS	18
+#define PTRACE_SETWMMXREGS	19
+/* 20 is unused */
+#define PTRACE_OLDSETOPTIONS	21
+#define PTRACE_GET_THREAD_AREA	22
+#define PTRACE_SET_SYSCALL	23
+/* PTRACE_SYSCALL is 24 */
+#define PTRACE_GETCRUNCHREGS	25
+#define PTRACE_SETCRUNCHREGS	26
+#define PTRACE_GETVFPREGS	27
+#define PTRACE_SETVFPREGS	28
+#define PTRACE_GETHBPREGS	29
+#define PTRACE_SETHBPREGS	30
+
+/*
+ * PSR bits
+ */
+#define USR26_MODE	0x00000000
+#define FIQ26_MODE	0x00000001
+#define IRQ26_MODE	0x00000002
+#define SVC26_MODE	0x00000003
+#define USR_MODE	0x00000010
+#define FIQ_MODE	0x00000011
+#define IRQ_MODE	0x00000012
+#define SVC_MODE	0x00000013
+#define ABT_MODE	0x00000017
+#define HYP_MODE	0x0000001a
+#define UND_MODE	0x0000001b
+#define SYSTEM_MODE	0x0000001f
+#define MODE32_BIT	0x00000010
+#define MODE_MASK	0x0000001f
+#define PSR_T_BIT	0x00000020
+#define PSR_F_BIT	0x00000040
+#define PSR_I_BIT	0x00000080
+#define PSR_A_BIT	0x00000100
+#define PSR_E_BIT	0x00000200
+#define PSR_J_BIT	0x01000000
+#define PSR_Q_BIT	0x08000000
+#define PSR_V_BIT	0x10000000
+#define PSR_C_BIT	0x20000000
+#define PSR_Z_BIT	0x40000000
+#define PSR_N_BIT	0x80000000
+
+/*
+ * Groups of PSR bits
+ */
+#define PSR_f		0xff000000	/* Flags		*/
+#define PSR_s		0x00ff0000	/* Status		*/
+#define PSR_x		0x0000ff00	/* Extension		*/
+#define PSR_c		0x000000ff	/* Control		*/
+
+/*
+ * ARMv7 groups of PSR bits
+ */
+#define APSR_MASK	0xf80f0000	/* N, Z, C, V, Q and GE flags */
+#define PSR_ISET_MASK	0x01000010	/* ISA state (J, T) mask */
+#define PSR_IT_MASK	0x0600fc00	/* If-Then execution state mask */
+#define PSR_ENDIAN_MASK	0x00000200	/* Endianness state mask */
+
+/*
+ * Default endianness state
+ */
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define PSR_ENDSTATE	PSR_E_BIT
+#else
+#define PSR_ENDSTATE	0
+#endif
+
+/* 
+ * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
+ * process is located in memory.
+ */
+#define PT_TEXT_ADDR		0x10000
+#define PT_DATA_ADDR		0x10004
+#define PT_TEXT_END_ADDR	0x10008
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored on the
+ * stack during a system call.  Note that sizeof(struct pt_regs)
+ * has to be a multiple of 8.
+ */
+#ifndef __KERNEL__
+struct pt_regs {
+	long uregs[18];
+};
+#endif /* __KERNEL__ */
+
+#define ARM_cpsr	uregs[16]
+#define ARM_pc		uregs[15]
+#define ARM_lr		uregs[14]
+#define ARM_sp		uregs[13]
+#define ARM_ip		uregs[12]
+#define ARM_fp		uregs[11]
+#define ARM_r10		uregs[10]
+#define ARM_r9		uregs[9]
+#define ARM_r8		uregs[8]
+#define ARM_r7		uregs[7]
+#define ARM_r6		uregs[6]
+#define ARM_r5		uregs[5]
+#define ARM_r4		uregs[4]
+#define ARM_r3		uregs[3]
+#define ARM_r2		uregs[2]
+#define ARM_r1		uregs[1]
+#define ARM_r0		uregs[0]
+#define ARM_ORIG_r0	uregs[17]
+
+/*
+ * The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS
+ * and core dumps.
+ */
+#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ )
+
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _UAPI__ASM_ARM_PTRACE_H */
diff --git a/arch/arm/include/uapi/asm/setup.h b/arch/arm/include/uapi/asm/setup.h
new file mode 100644
index 0000000..979ff40
--- /dev/null
+++ b/arch/arm/include/uapi/asm/setup.h
@@ -0,0 +1,187 @@
+/*
+ *  linux/include/asm/setup.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Structure passed to kernel to tell it about the
+ *  hardware it's running on.  See Documentation/arm/Setup
+ *  for more info.
+ */
+#ifndef _UAPI__ASMARM_SETUP_H
+#define _UAPI__ASMARM_SETUP_H
+
+#include <linux/types.h>
+
+#define COMMAND_LINE_SIZE 1024
+
+/* The list ends with an ATAG_NONE node. */
+#define ATAG_NONE	0x00000000
+
+struct tag_header {
+	__u32 size;
+	__u32 tag;
+};
+
+/* The list must start with an ATAG_CORE node */
+#define ATAG_CORE	0x54410001
+
+struct tag_core {
+	__u32 flags;		/* bit 0 = read-only */
+	__u32 pagesize;
+	__u32 rootdev;
+};
+
+/* it is allowed to have multiple ATAG_MEM nodes */
+#define ATAG_MEM	0x54410002
+
+struct tag_mem32 {
+	__u32	size;
+	__u32	start;	/* physical start address */
+};
+
+/* VGA text type displays */
+#define ATAG_VIDEOTEXT	0x54410003
+
+struct tag_videotext {
+	__u8		x;
+	__u8		y;
+	__u16		video_page;
+	__u8		video_mode;
+	__u8		video_cols;
+	__u16		video_ega_bx;
+	__u8		video_lines;
+	__u8		video_isvga;
+	__u16		video_points;
+};
+
+/* describes how the ramdisk will be used in kernel */
+#define ATAG_RAMDISK	0x54410004
+
+struct tag_ramdisk {
+	__u32 flags;	/* bit 0 = load, bit 1 = prompt */
+	__u32 size;	/* decompressed ramdisk size in _kilo_ bytes */
+	__u32 start;	/* starting block of floppy-based RAM disk image */
+};
+
+/* describes where the compressed ramdisk image lives (virtual address) */
+/*
+ * this one accidentally used virtual addresses - as such,
+ * it's deprecated.
+ */
+#define ATAG_INITRD	0x54410005
+
+/* describes where the compressed ramdisk image lives (physical address) */
+#define ATAG_INITRD2	0x54420005
+
+struct tag_initrd {
+	__u32 start;	/* physical start address */
+	__u32 size;	/* size of compressed ramdisk image in bytes */
+};
+
+/* board serial number. "64 bits should be enough for everybody" */
+#define ATAG_SERIAL	0x54410006
+
+struct tag_serialnr {
+	__u32 low;
+	__u32 high;
+};
+
+/* board revision */
+#define ATAG_REVISION	0x54410007
+
+struct tag_revision {
+	__u32 rev;
+};
+
+/* initial values for vesafb-type framebuffers. see struct screen_info
+ * in include/linux/tty.h
+ */
+#define ATAG_VIDEOLFB	0x54410008
+
+struct tag_videolfb {
+	__u16		lfb_width;
+	__u16		lfb_height;
+	__u16		lfb_depth;
+	__u16		lfb_linelength;
+	__u32		lfb_base;
+	__u32		lfb_size;
+	__u8		red_size;
+	__u8		red_pos;
+	__u8		green_size;
+	__u8		green_pos;
+	__u8		blue_size;
+	__u8		blue_pos;
+	__u8		rsvd_size;
+	__u8		rsvd_pos;
+};
+
+/* command line: \0 terminated string */
+#define ATAG_CMDLINE	0x54410009
+
+struct tag_cmdline {
+	char	cmdline[1];	/* this is the minimum size */
+};
+
+/* acorn RiscPC specific information */
+#define ATAG_ACORN	0x41000101
+
+struct tag_acorn {
+	__u32 memc_control_reg;
+	__u32 vram_pages;
+	__u8 sounddefault;
+	__u8 adfsdrives;
+};
+
+/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
+#define ATAG_MEMCLK	0x41000402
+
+struct tag_memclk {
+	__u32 fmemclk;
+};
+
+struct tag {
+	struct tag_header hdr;
+	union {
+		struct tag_core		core;
+		struct tag_mem32	mem;
+		struct tag_videotext	videotext;
+		struct tag_ramdisk	ramdisk;
+		struct tag_initrd	initrd;
+		struct tag_serialnr	serialnr;
+		struct tag_revision	revision;
+		struct tag_videolfb	videolfb;
+		struct tag_cmdline	cmdline;
+
+		/*
+		 * Acorn specific
+		 */
+		struct tag_acorn	acorn;
+
+		/*
+		 * DC21285 specific
+		 */
+		struct tag_memclk	memclk;
+	} u;
+};
+
+struct tagtable {
+	__u32 tag;
+	int (*parse)(const struct tag *);
+};
+
+#define tag_member_present(tag,member)				\
+	((unsigned long)(&((struct tag *)0L)->member + 1)	\
+		<= (tag)->hdr.size * 4)
+
+#define tag_next(t)	((struct tag *)((__u32 *)(t) + (t)->hdr.size))
+#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
+
+#define for_each_tag(t,base)		\
+	for (t = base; t->hdr.size; t = tag_next(t))
+
+
+#endif /* _UAPI__ASMARM_SETUP_H */
diff --git a/arch/arm/include/asm/sigcontext.h b/arch/arm/include/uapi/asm/sigcontext.h
similarity index 100%
rename from arch/arm/include/asm/sigcontext.h
rename to arch/arm/include/uapi/asm/sigcontext.h
diff --git a/arch/arm/include/uapi/asm/signal.h b/arch/arm/include/uapi/asm/signal.h
new file mode 100644
index 0000000..921c57f
--- /dev/null
+++ b/arch/arm/include/uapi/asm/signal.h
@@ -0,0 +1,127 @@
+#ifndef _UAPI_ASMARM_SIGNAL_H
+#define _UAPI_ASMARM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+#define SIGSWI		32
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
+ * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
+ * SA_SIGINFO		deliver the signal with SIGINFO structs
+ * SA_THIRTYTWO		delivers the signal in 32-bit mode, even if the task 
+ *			is running in 26-bit.
+ * SA_ONSTACK		allows alternate signal stacks (see sigaltstack(2)).
+ * SA_RESTART		flag to get restarting signals (which were the default long ago)
+ * SA_NODEFER		prevents the current signal from being masked in the handler.
+ * SA_RESETHAND		clears the handler when the signal is delivered.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_THIRTYTWO	0x02000000
+#define SA_RESTORER	0x04000000
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal-defs.h>
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+
+#endif /* _UAPI_ASMARM_SIGNAL_H */
diff --git a/arch/arm/include/asm/stat.h b/arch/arm/include/uapi/asm/stat.h
similarity index 100%
rename from arch/arm/include/asm/stat.h
rename to arch/arm/include/uapi/asm/stat.h
diff --git a/arch/arm/include/asm/statfs.h b/arch/arm/include/uapi/asm/statfs.h
similarity index 100%
rename from arch/arm/include/asm/statfs.h
rename to arch/arm/include/uapi/asm/statfs.h
diff --git a/arch/arm/include/uapi/asm/swab.h b/arch/arm/include/uapi/asm/swab.h
new file mode 100644
index 0000000..6fcb32a
--- /dev/null
+++ b/arch/arm/include/uapi/asm/swab.h
@@ -0,0 +1,53 @@
+/*
+ *  arch/arm/include/asm/byteorder.h
+ *
+ * ARM Endian-ness.  In little endian mode, the data bus is connected such
+ * that byte accesses appear as:
+ *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ *
+ * When in big endian mode, byte accesses appear as:
+ *  0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ */
+#ifndef _UAPI__ASM_ARM_SWAB_H
+#define _UAPI__ASM_ARM_SWAB_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __SWAB_64_THRU_32__
+#endif
+
+
+#if !defined(__KERNEL__) || __LINUX_ARM_ARCH__ < 6
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+	__u32 t;
+
+#ifndef __thumb__
+	if (!__builtin_constant_p(x)) {
+		/*
+		 * The compiler needs a bit of a hint here to always do the
+		 * right thing and not screw it up to different degrees
+		 * depending on the gcc version.
+		 */
+		asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
+	} else
+#endif
+		t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
+
+	x = (x << 24) | (x >> 8);		/* mov r0,r0,ror #8      */
+	t &= ~0x00FF0000;			/* bic r1,r1,#0x00FF0000 */
+	x ^= (t >> 8);				/* eor r0,r0,r1,lsr #8   */
+
+	return x;
+}
+#define __arch_swab32 __arch_swab32
+
+#endif
+
+#endif /* _UAPI__ASM_ARM_SWAB_H */
diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h
new file mode 100644
index 0000000..ac03bdb
--- /dev/null
+++ b/arch/arm/include/uapi/asm/unistd.h
@@ -0,0 +1,450 @@
+/*
+ *  arch/arm/include/asm/unistd.h
+ *
+ *  Copyright (C) 2001-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Please forward _all_ changes to this file to rmk@arm.linux.org.uk,
+ * no matter what the change is.  Thanks!
+ */
+#ifndef _UAPI__ASM_ARM_UNISTD_H
+#define _UAPI__ASM_ARM_UNISTD_H
+
+#define __NR_OABI_SYSCALL_BASE	0x900000
+
+#if defined(__thumb__) || defined(__ARM_EABI__)
+#define __NR_SYSCALL_BASE	0
+#else
+#define __NR_SYSCALL_BASE	__NR_OABI_SYSCALL_BASE
+#endif
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall		(__NR_SYSCALL_BASE+  0)
+#define __NR_exit			(__NR_SYSCALL_BASE+  1)
+#define __NR_fork			(__NR_SYSCALL_BASE+  2)
+#define __NR_read			(__NR_SYSCALL_BASE+  3)
+#define __NR_write			(__NR_SYSCALL_BASE+  4)
+#define __NR_open			(__NR_SYSCALL_BASE+  5)
+#define __NR_close			(__NR_SYSCALL_BASE+  6)
+					/* 7 was sys_waitpid */
+#define __NR_creat			(__NR_SYSCALL_BASE+  8)
+#define __NR_link			(__NR_SYSCALL_BASE+  9)
+#define __NR_unlink			(__NR_SYSCALL_BASE+ 10)
+#define __NR_execve			(__NR_SYSCALL_BASE+ 11)
+#define __NR_chdir			(__NR_SYSCALL_BASE+ 12)
+#define __NR_time			(__NR_SYSCALL_BASE+ 13)
+#define __NR_mknod			(__NR_SYSCALL_BASE+ 14)
+#define __NR_chmod			(__NR_SYSCALL_BASE+ 15)
+#define __NR_lchown			(__NR_SYSCALL_BASE+ 16)
+					/* 17 was sys_break */
+					/* 18 was sys_stat */
+#define __NR_lseek			(__NR_SYSCALL_BASE+ 19)
+#define __NR_getpid			(__NR_SYSCALL_BASE+ 20)
+#define __NR_mount			(__NR_SYSCALL_BASE+ 21)
+#define __NR_umount			(__NR_SYSCALL_BASE+ 22)
+#define __NR_setuid			(__NR_SYSCALL_BASE+ 23)
+#define __NR_getuid			(__NR_SYSCALL_BASE+ 24)
+#define __NR_stime			(__NR_SYSCALL_BASE+ 25)
+#define __NR_ptrace			(__NR_SYSCALL_BASE+ 26)
+#define __NR_alarm			(__NR_SYSCALL_BASE+ 27)
+					/* 28 was sys_fstat */
+#define __NR_pause			(__NR_SYSCALL_BASE+ 29)
+#define __NR_utime			(__NR_SYSCALL_BASE+ 30)
+					/* 31 was sys_stty */
+					/* 32 was sys_gtty */
+#define __NR_access			(__NR_SYSCALL_BASE+ 33)
+#define __NR_nice			(__NR_SYSCALL_BASE+ 34)
+					/* 35 was sys_ftime */
+#define __NR_sync			(__NR_SYSCALL_BASE+ 36)
+#define __NR_kill			(__NR_SYSCALL_BASE+ 37)
+#define __NR_rename			(__NR_SYSCALL_BASE+ 38)
+#define __NR_mkdir			(__NR_SYSCALL_BASE+ 39)
+#define __NR_rmdir			(__NR_SYSCALL_BASE+ 40)
+#define __NR_dup			(__NR_SYSCALL_BASE+ 41)
+#define __NR_pipe			(__NR_SYSCALL_BASE+ 42)
+#define __NR_times			(__NR_SYSCALL_BASE+ 43)
+					/* 44 was sys_prof */
+#define __NR_brk			(__NR_SYSCALL_BASE+ 45)
+#define __NR_setgid			(__NR_SYSCALL_BASE+ 46)
+#define __NR_getgid			(__NR_SYSCALL_BASE+ 47)
+					/* 48 was sys_signal */
+#define __NR_geteuid			(__NR_SYSCALL_BASE+ 49)
+#define __NR_getegid			(__NR_SYSCALL_BASE+ 50)
+#define __NR_acct			(__NR_SYSCALL_BASE+ 51)
+#define __NR_umount2			(__NR_SYSCALL_BASE+ 52)
+					/* 53 was sys_lock */
+#define __NR_ioctl			(__NR_SYSCALL_BASE+ 54)
+#define __NR_fcntl			(__NR_SYSCALL_BASE+ 55)
+					/* 56 was sys_mpx */
+#define __NR_setpgid			(__NR_SYSCALL_BASE+ 57)
+					/* 58 was sys_ulimit */
+					/* 59 was sys_olduname */
+#define __NR_umask			(__NR_SYSCALL_BASE+ 60)
+#define __NR_chroot			(__NR_SYSCALL_BASE+ 61)
+#define __NR_ustat			(__NR_SYSCALL_BASE+ 62)
+#define __NR_dup2			(__NR_SYSCALL_BASE+ 63)
+#define __NR_getppid			(__NR_SYSCALL_BASE+ 64)
+#define __NR_getpgrp			(__NR_SYSCALL_BASE+ 65)
+#define __NR_setsid			(__NR_SYSCALL_BASE+ 66)
+#define __NR_sigaction			(__NR_SYSCALL_BASE+ 67)
+					/* 68 was sys_sgetmask */
+					/* 69 was sys_ssetmask */
+#define __NR_setreuid			(__NR_SYSCALL_BASE+ 70)
+#define __NR_setregid			(__NR_SYSCALL_BASE+ 71)
+#define __NR_sigsuspend			(__NR_SYSCALL_BASE+ 72)
+#define __NR_sigpending			(__NR_SYSCALL_BASE+ 73)
+#define __NR_sethostname		(__NR_SYSCALL_BASE+ 74)
+#define __NR_setrlimit			(__NR_SYSCALL_BASE+ 75)
+#define __NR_getrlimit			(__NR_SYSCALL_BASE+ 76)	/* Back compat 2GB limited rlimit */
+#define __NR_getrusage			(__NR_SYSCALL_BASE+ 77)
+#define __NR_gettimeofday		(__NR_SYSCALL_BASE+ 78)
+#define __NR_settimeofday		(__NR_SYSCALL_BASE+ 79)
+#define __NR_getgroups			(__NR_SYSCALL_BASE+ 80)
+#define __NR_setgroups			(__NR_SYSCALL_BASE+ 81)
+#define __NR_select			(__NR_SYSCALL_BASE+ 82)
+#define __NR_symlink			(__NR_SYSCALL_BASE+ 83)
+					/* 84 was sys_lstat */
+#define __NR_readlink			(__NR_SYSCALL_BASE+ 85)
+#define __NR_uselib			(__NR_SYSCALL_BASE+ 86)
+#define __NR_swapon			(__NR_SYSCALL_BASE+ 87)
+#define __NR_reboot			(__NR_SYSCALL_BASE+ 88)
+#define __NR_readdir			(__NR_SYSCALL_BASE+ 89)
+#define __NR_mmap			(__NR_SYSCALL_BASE+ 90)
+#define __NR_munmap			(__NR_SYSCALL_BASE+ 91)
+#define __NR_truncate			(__NR_SYSCALL_BASE+ 92)
+#define __NR_ftruncate			(__NR_SYSCALL_BASE+ 93)
+#define __NR_fchmod			(__NR_SYSCALL_BASE+ 94)
+#define __NR_fchown			(__NR_SYSCALL_BASE+ 95)
+#define __NR_getpriority		(__NR_SYSCALL_BASE+ 96)
+#define __NR_setpriority		(__NR_SYSCALL_BASE+ 97)
+					/* 98 was sys_profil */
+#define __NR_statfs			(__NR_SYSCALL_BASE+ 99)
+#define __NR_fstatfs			(__NR_SYSCALL_BASE+100)
+					/* 101 was sys_ioperm */
+#define __NR_socketcall			(__NR_SYSCALL_BASE+102)
+#define __NR_syslog			(__NR_SYSCALL_BASE+103)
+#define __NR_setitimer			(__NR_SYSCALL_BASE+104)
+#define __NR_getitimer			(__NR_SYSCALL_BASE+105)
+#define __NR_stat			(__NR_SYSCALL_BASE+106)
+#define __NR_lstat			(__NR_SYSCALL_BASE+107)
+#define __NR_fstat			(__NR_SYSCALL_BASE+108)
+					/* 109 was sys_uname */
+					/* 110 was sys_iopl */
+#define __NR_vhangup			(__NR_SYSCALL_BASE+111)
+					/* 112 was sys_idle */
+#define __NR_syscall			(__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
+#define __NR_wait4			(__NR_SYSCALL_BASE+114)
+#define __NR_swapoff			(__NR_SYSCALL_BASE+115)
+#define __NR_sysinfo			(__NR_SYSCALL_BASE+116)
+#define __NR_ipc			(__NR_SYSCALL_BASE+117)
+#define __NR_fsync			(__NR_SYSCALL_BASE+118)
+#define __NR_sigreturn			(__NR_SYSCALL_BASE+119)
+#define __NR_clone			(__NR_SYSCALL_BASE+120)
+#define __NR_setdomainname		(__NR_SYSCALL_BASE+121)
+#define __NR_uname			(__NR_SYSCALL_BASE+122)
+					/* 123 was sys_modify_ldt */
+#define __NR_adjtimex			(__NR_SYSCALL_BASE+124)
+#define __NR_mprotect			(__NR_SYSCALL_BASE+125)
+#define __NR_sigprocmask		(__NR_SYSCALL_BASE+126)
+					/* 127 was sys_create_module */
+#define __NR_init_module		(__NR_SYSCALL_BASE+128)
+#define __NR_delete_module		(__NR_SYSCALL_BASE+129)
+					/* 130 was sys_get_kernel_syms */
+#define __NR_quotactl			(__NR_SYSCALL_BASE+131)
+#define __NR_getpgid			(__NR_SYSCALL_BASE+132)
+#define __NR_fchdir			(__NR_SYSCALL_BASE+133)
+#define __NR_bdflush			(__NR_SYSCALL_BASE+134)
+#define __NR_sysfs			(__NR_SYSCALL_BASE+135)
+#define __NR_personality		(__NR_SYSCALL_BASE+136)
+					/* 137 was sys_afs_syscall */
+#define __NR_setfsuid			(__NR_SYSCALL_BASE+138)
+#define __NR_setfsgid			(__NR_SYSCALL_BASE+139)
+#define __NR__llseek			(__NR_SYSCALL_BASE+140)
+#define __NR_getdents			(__NR_SYSCALL_BASE+141)
+#define __NR__newselect			(__NR_SYSCALL_BASE+142)
+#define __NR_flock			(__NR_SYSCALL_BASE+143)
+#define __NR_msync			(__NR_SYSCALL_BASE+144)
+#define __NR_readv			(__NR_SYSCALL_BASE+145)
+#define __NR_writev			(__NR_SYSCALL_BASE+146)
+#define __NR_getsid			(__NR_SYSCALL_BASE+147)
+#define __NR_fdatasync			(__NR_SYSCALL_BASE+148)
+#define __NR__sysctl			(__NR_SYSCALL_BASE+149)
+#define __NR_mlock			(__NR_SYSCALL_BASE+150)
+#define __NR_munlock			(__NR_SYSCALL_BASE+151)
+#define __NR_mlockall			(__NR_SYSCALL_BASE+152)
+#define __NR_munlockall			(__NR_SYSCALL_BASE+153)
+#define __NR_sched_setparam		(__NR_SYSCALL_BASE+154)
+#define __NR_sched_getparam		(__NR_SYSCALL_BASE+155)
+#define __NR_sched_setscheduler		(__NR_SYSCALL_BASE+156)
+#define __NR_sched_getscheduler		(__NR_SYSCALL_BASE+157)
+#define __NR_sched_yield		(__NR_SYSCALL_BASE+158)
+#define __NR_sched_get_priority_max	(__NR_SYSCALL_BASE+159)
+#define __NR_sched_get_priority_min	(__NR_SYSCALL_BASE+160)
+#define __NR_sched_rr_get_interval	(__NR_SYSCALL_BASE+161)
+#define __NR_nanosleep			(__NR_SYSCALL_BASE+162)
+#define __NR_mremap			(__NR_SYSCALL_BASE+163)
+#define __NR_setresuid			(__NR_SYSCALL_BASE+164)
+#define __NR_getresuid			(__NR_SYSCALL_BASE+165)
+					/* 166 was sys_vm86 */
+					/* 167 was sys_query_module */
+#define __NR_poll			(__NR_SYSCALL_BASE+168)
+#define __NR_nfsservctl			(__NR_SYSCALL_BASE+169)
+#define __NR_setresgid			(__NR_SYSCALL_BASE+170)
+#define __NR_getresgid			(__NR_SYSCALL_BASE+171)
+#define __NR_prctl			(__NR_SYSCALL_BASE+172)
+#define __NR_rt_sigreturn		(__NR_SYSCALL_BASE+173)
+#define __NR_rt_sigaction		(__NR_SYSCALL_BASE+174)
+#define __NR_rt_sigprocmask		(__NR_SYSCALL_BASE+175)
+#define __NR_rt_sigpending		(__NR_SYSCALL_BASE+176)
+#define __NR_rt_sigtimedwait		(__NR_SYSCALL_BASE+177)
+#define __NR_rt_sigqueueinfo		(__NR_SYSCALL_BASE+178)
+#define __NR_rt_sigsuspend		(__NR_SYSCALL_BASE+179)
+#define __NR_pread64			(__NR_SYSCALL_BASE+180)
+#define __NR_pwrite64			(__NR_SYSCALL_BASE+181)
+#define __NR_chown			(__NR_SYSCALL_BASE+182)
+#define __NR_getcwd			(__NR_SYSCALL_BASE+183)
+#define __NR_capget			(__NR_SYSCALL_BASE+184)
+#define __NR_capset			(__NR_SYSCALL_BASE+185)
+#define __NR_sigaltstack		(__NR_SYSCALL_BASE+186)
+#define __NR_sendfile			(__NR_SYSCALL_BASE+187)
+					/* 188 reserved */
+					/* 189 reserved */
+#define __NR_vfork			(__NR_SYSCALL_BASE+190)
+#define __NR_ugetrlimit			(__NR_SYSCALL_BASE+191)	/* SuS compliant getrlimit */
+#define __NR_mmap2			(__NR_SYSCALL_BASE+192)
+#define __NR_truncate64			(__NR_SYSCALL_BASE+193)
+#define __NR_ftruncate64		(__NR_SYSCALL_BASE+194)
+#define __NR_stat64			(__NR_SYSCALL_BASE+195)
+#define __NR_lstat64			(__NR_SYSCALL_BASE+196)
+#define __NR_fstat64			(__NR_SYSCALL_BASE+197)
+#define __NR_lchown32			(__NR_SYSCALL_BASE+198)
+#define __NR_getuid32			(__NR_SYSCALL_BASE+199)
+#define __NR_getgid32			(__NR_SYSCALL_BASE+200)
+#define __NR_geteuid32			(__NR_SYSCALL_BASE+201)
+#define __NR_getegid32			(__NR_SYSCALL_BASE+202)
+#define __NR_setreuid32			(__NR_SYSCALL_BASE+203)
+#define __NR_setregid32			(__NR_SYSCALL_BASE+204)
+#define __NR_getgroups32		(__NR_SYSCALL_BASE+205)
+#define __NR_setgroups32		(__NR_SYSCALL_BASE+206)
+#define __NR_fchown32			(__NR_SYSCALL_BASE+207)
+#define __NR_setresuid32		(__NR_SYSCALL_BASE+208)
+#define __NR_getresuid32		(__NR_SYSCALL_BASE+209)
+#define __NR_setresgid32		(__NR_SYSCALL_BASE+210)
+#define __NR_getresgid32		(__NR_SYSCALL_BASE+211)
+#define __NR_chown32			(__NR_SYSCALL_BASE+212)
+#define __NR_setuid32			(__NR_SYSCALL_BASE+213)
+#define __NR_setgid32			(__NR_SYSCALL_BASE+214)
+#define __NR_setfsuid32			(__NR_SYSCALL_BASE+215)
+#define __NR_setfsgid32			(__NR_SYSCALL_BASE+216)
+#define __NR_getdents64			(__NR_SYSCALL_BASE+217)
+#define __NR_pivot_root			(__NR_SYSCALL_BASE+218)
+#define __NR_mincore			(__NR_SYSCALL_BASE+219)
+#define __NR_madvise			(__NR_SYSCALL_BASE+220)
+#define __NR_fcntl64			(__NR_SYSCALL_BASE+221)
+					/* 222 for tux */
+					/* 223 is unused */
+#define __NR_gettid			(__NR_SYSCALL_BASE+224)
+#define __NR_readahead			(__NR_SYSCALL_BASE+225)
+#define __NR_setxattr			(__NR_SYSCALL_BASE+226)
+#define __NR_lsetxattr			(__NR_SYSCALL_BASE+227)
+#define __NR_fsetxattr			(__NR_SYSCALL_BASE+228)
+#define __NR_getxattr			(__NR_SYSCALL_BASE+229)
+#define __NR_lgetxattr			(__NR_SYSCALL_BASE+230)
+#define __NR_fgetxattr			(__NR_SYSCALL_BASE+231)
+#define __NR_listxattr			(__NR_SYSCALL_BASE+232)
+#define __NR_llistxattr			(__NR_SYSCALL_BASE+233)
+#define __NR_flistxattr			(__NR_SYSCALL_BASE+234)
+#define __NR_removexattr		(__NR_SYSCALL_BASE+235)
+#define __NR_lremovexattr		(__NR_SYSCALL_BASE+236)
+#define __NR_fremovexattr		(__NR_SYSCALL_BASE+237)
+#define __NR_tkill			(__NR_SYSCALL_BASE+238)
+#define __NR_sendfile64			(__NR_SYSCALL_BASE+239)
+#define __NR_futex			(__NR_SYSCALL_BASE+240)
+#define __NR_sched_setaffinity		(__NR_SYSCALL_BASE+241)
+#define __NR_sched_getaffinity		(__NR_SYSCALL_BASE+242)
+#define __NR_io_setup			(__NR_SYSCALL_BASE+243)
+#define __NR_io_destroy			(__NR_SYSCALL_BASE+244)
+#define __NR_io_getevents		(__NR_SYSCALL_BASE+245)
+#define __NR_io_submit			(__NR_SYSCALL_BASE+246)
+#define __NR_io_cancel			(__NR_SYSCALL_BASE+247)
+#define __NR_exit_group			(__NR_SYSCALL_BASE+248)
+#define __NR_lookup_dcookie		(__NR_SYSCALL_BASE+249)
+#define __NR_epoll_create		(__NR_SYSCALL_BASE+250)
+#define __NR_epoll_ctl			(__NR_SYSCALL_BASE+251)
+#define __NR_epoll_wait			(__NR_SYSCALL_BASE+252)
+#define __NR_remap_file_pages		(__NR_SYSCALL_BASE+253)
+					/* 254 for set_thread_area */
+					/* 255 for get_thread_area */
+#define __NR_set_tid_address		(__NR_SYSCALL_BASE+256)
+#define __NR_timer_create		(__NR_SYSCALL_BASE+257)
+#define __NR_timer_settime		(__NR_SYSCALL_BASE+258)
+#define __NR_timer_gettime		(__NR_SYSCALL_BASE+259)
+#define __NR_timer_getoverrun		(__NR_SYSCALL_BASE+260)
+#define __NR_timer_delete		(__NR_SYSCALL_BASE+261)
+#define __NR_clock_settime		(__NR_SYSCALL_BASE+262)
+#define __NR_clock_gettime		(__NR_SYSCALL_BASE+263)
+#define __NR_clock_getres		(__NR_SYSCALL_BASE+264)
+#define __NR_clock_nanosleep		(__NR_SYSCALL_BASE+265)
+#define __NR_statfs64			(__NR_SYSCALL_BASE+266)
+#define __NR_fstatfs64			(__NR_SYSCALL_BASE+267)
+#define __NR_tgkill			(__NR_SYSCALL_BASE+268)
+#define __NR_utimes			(__NR_SYSCALL_BASE+269)
+#define __NR_arm_fadvise64_64		(__NR_SYSCALL_BASE+270)
+#define __NR_pciconfig_iobase		(__NR_SYSCALL_BASE+271)
+#define __NR_pciconfig_read		(__NR_SYSCALL_BASE+272)
+#define __NR_pciconfig_write		(__NR_SYSCALL_BASE+273)
+#define __NR_mq_open			(__NR_SYSCALL_BASE+274)
+#define __NR_mq_unlink			(__NR_SYSCALL_BASE+275)
+#define __NR_mq_timedsend		(__NR_SYSCALL_BASE+276)
+#define __NR_mq_timedreceive		(__NR_SYSCALL_BASE+277)
+#define __NR_mq_notify			(__NR_SYSCALL_BASE+278)
+#define __NR_mq_getsetattr		(__NR_SYSCALL_BASE+279)
+#define __NR_waitid			(__NR_SYSCALL_BASE+280)
+#define __NR_socket			(__NR_SYSCALL_BASE+281)
+#define __NR_bind			(__NR_SYSCALL_BASE+282)
+#define __NR_connect			(__NR_SYSCALL_BASE+283)
+#define __NR_listen			(__NR_SYSCALL_BASE+284)
+#define __NR_accept			(__NR_SYSCALL_BASE+285)
+#define __NR_getsockname		(__NR_SYSCALL_BASE+286)
+#define __NR_getpeername		(__NR_SYSCALL_BASE+287)
+#define __NR_socketpair			(__NR_SYSCALL_BASE+288)
+#define __NR_send			(__NR_SYSCALL_BASE+289)
+#define __NR_sendto			(__NR_SYSCALL_BASE+290)
+#define __NR_recv			(__NR_SYSCALL_BASE+291)
+#define __NR_recvfrom			(__NR_SYSCALL_BASE+292)
+#define __NR_shutdown			(__NR_SYSCALL_BASE+293)
+#define __NR_setsockopt			(__NR_SYSCALL_BASE+294)
+#define __NR_getsockopt			(__NR_SYSCALL_BASE+295)
+#define __NR_sendmsg			(__NR_SYSCALL_BASE+296)
+#define __NR_recvmsg			(__NR_SYSCALL_BASE+297)
+#define __NR_semop			(__NR_SYSCALL_BASE+298)
+#define __NR_semget			(__NR_SYSCALL_BASE+299)
+#define __NR_semctl			(__NR_SYSCALL_BASE+300)
+#define __NR_msgsnd			(__NR_SYSCALL_BASE+301)
+#define __NR_msgrcv			(__NR_SYSCALL_BASE+302)
+#define __NR_msgget			(__NR_SYSCALL_BASE+303)
+#define __NR_msgctl			(__NR_SYSCALL_BASE+304)
+#define __NR_shmat			(__NR_SYSCALL_BASE+305)
+#define __NR_shmdt			(__NR_SYSCALL_BASE+306)
+#define __NR_shmget			(__NR_SYSCALL_BASE+307)
+#define __NR_shmctl			(__NR_SYSCALL_BASE+308)
+#define __NR_add_key			(__NR_SYSCALL_BASE+309)
+#define __NR_request_key		(__NR_SYSCALL_BASE+310)
+#define __NR_keyctl			(__NR_SYSCALL_BASE+311)
+#define __NR_semtimedop			(__NR_SYSCALL_BASE+312)
+#define __NR_vserver			(__NR_SYSCALL_BASE+313)
+#define __NR_ioprio_set			(__NR_SYSCALL_BASE+314)
+#define __NR_ioprio_get			(__NR_SYSCALL_BASE+315)
+#define __NR_inotify_init		(__NR_SYSCALL_BASE+316)
+#define __NR_inotify_add_watch		(__NR_SYSCALL_BASE+317)
+#define __NR_inotify_rm_watch		(__NR_SYSCALL_BASE+318)
+#define __NR_mbind			(__NR_SYSCALL_BASE+319)
+#define __NR_get_mempolicy		(__NR_SYSCALL_BASE+320)
+#define __NR_set_mempolicy		(__NR_SYSCALL_BASE+321)
+#define __NR_openat			(__NR_SYSCALL_BASE+322)
+#define __NR_mkdirat			(__NR_SYSCALL_BASE+323)
+#define __NR_mknodat			(__NR_SYSCALL_BASE+324)
+#define __NR_fchownat			(__NR_SYSCALL_BASE+325)
+#define __NR_futimesat			(__NR_SYSCALL_BASE+326)
+#define __NR_fstatat64			(__NR_SYSCALL_BASE+327)
+#define __NR_unlinkat			(__NR_SYSCALL_BASE+328)
+#define __NR_renameat			(__NR_SYSCALL_BASE+329)
+#define __NR_linkat			(__NR_SYSCALL_BASE+330)
+#define __NR_symlinkat			(__NR_SYSCALL_BASE+331)
+#define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
+#define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
+#define __NR_faccessat			(__NR_SYSCALL_BASE+334)
+#define __NR_pselect6			(__NR_SYSCALL_BASE+335)
+#define __NR_ppoll			(__NR_SYSCALL_BASE+336)
+#define __NR_unshare			(__NR_SYSCALL_BASE+337)
+#define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
+#define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
+#define __NR_splice			(__NR_SYSCALL_BASE+340)
+#define __NR_arm_sync_file_range	(__NR_SYSCALL_BASE+341)
+#define __NR_sync_file_range2		__NR_arm_sync_file_range
+#define __NR_tee			(__NR_SYSCALL_BASE+342)
+#define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
+#define __NR_move_pages			(__NR_SYSCALL_BASE+344)
+#define __NR_getcpu			(__NR_SYSCALL_BASE+345)
+#define __NR_epoll_pwait		(__NR_SYSCALL_BASE+346)
+#define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
+#define __NR_utimensat			(__NR_SYSCALL_BASE+348)
+#define __NR_signalfd			(__NR_SYSCALL_BASE+349)
+#define __NR_timerfd_create		(__NR_SYSCALL_BASE+350)
+#define __NR_eventfd			(__NR_SYSCALL_BASE+351)
+#define __NR_fallocate			(__NR_SYSCALL_BASE+352)
+#define __NR_timerfd_settime		(__NR_SYSCALL_BASE+353)
+#define __NR_timerfd_gettime		(__NR_SYSCALL_BASE+354)
+#define __NR_signalfd4			(__NR_SYSCALL_BASE+355)
+#define __NR_eventfd2			(__NR_SYSCALL_BASE+356)
+#define __NR_epoll_create1		(__NR_SYSCALL_BASE+357)
+#define __NR_dup3			(__NR_SYSCALL_BASE+358)
+#define __NR_pipe2			(__NR_SYSCALL_BASE+359)
+#define __NR_inotify_init1		(__NR_SYSCALL_BASE+360)
+#define __NR_preadv			(__NR_SYSCALL_BASE+361)
+#define __NR_pwritev			(__NR_SYSCALL_BASE+362)
+#define __NR_rt_tgsigqueueinfo		(__NR_SYSCALL_BASE+363)
+#define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
+#define __NR_recvmmsg			(__NR_SYSCALL_BASE+365)
+#define __NR_accept4			(__NR_SYSCALL_BASE+366)
+#define __NR_fanotify_init		(__NR_SYSCALL_BASE+367)
+#define __NR_fanotify_mark		(__NR_SYSCALL_BASE+368)
+#define __NR_prlimit64			(__NR_SYSCALL_BASE+369)
+#define __NR_name_to_handle_at		(__NR_SYSCALL_BASE+370)
+#define __NR_open_by_handle_at		(__NR_SYSCALL_BASE+371)
+#define __NR_clock_adjtime		(__NR_SYSCALL_BASE+372)
+#define __NR_syncfs			(__NR_SYSCALL_BASE+373)
+#define __NR_sendmmsg			(__NR_SYSCALL_BASE+374)
+#define __NR_setns			(__NR_SYSCALL_BASE+375)
+#define __NR_process_vm_readv		(__NR_SYSCALL_BASE+376)
+#define __NR_process_vm_writev		(__NR_SYSCALL_BASE+377)
+					/* 378 for kcmp */
+
+/*
+ * This may need to be greater than __NR_last_syscall+1 in order to
+ * account for the padding in the syscall table
+ */
+
+/*
+ * The following SWIs are ARM private.
+ */
+#define __ARM_NR_BASE			(__NR_SYSCALL_BASE+0x0f0000)
+#define __ARM_NR_breakpoint		(__ARM_NR_BASE+1)
+#define __ARM_NR_cacheflush		(__ARM_NR_BASE+2)
+#define __ARM_NR_usr26			(__ARM_NR_BASE+3)
+#define __ARM_NR_usr32			(__ARM_NR_BASE+4)
+#define __ARM_NR_set_tls		(__ARM_NR_BASE+5)
+
+/*
+ * *NOTE*: This is a ghost syscall private to the kernel.  Only the
+ * __kuser_cmpxchg code in entry-armv.S should be aware of its
+ * existence.  Don't ever use this from user code.
+ */
+
+/*
+ * The following syscalls are obsolete and no longer available for EABI.
+ */
+#if !defined(__KERNEL__)
+#if defined(__ARM_EABI__)
+#undef __NR_time
+#undef __NR_umount
+#undef __NR_stime
+#undef __NR_alarm
+#undef __NR_utime
+#undef __NR_getrlimit
+#undef __NR_select
+#undef __NR_readdir
+#undef __NR_mmap
+#undef __NR_socketcall
+#undef __NR_syscall
+#undef __NR_ipc
+#endif
+#endif
+
+#endif /* _UAPI__ASM_ARM_UNISTD_H */
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index c8050b1..b142071 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -19,8 +19,8 @@
 
 config SOC_AT91SAM9
 	bool
-	select GENERIC_CLOCKEVENTS
 	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
 
 menu "Atmel AT91 System-on-Chip"
 
@@ -28,66 +28,66 @@
 
 config SOC_AT91SAM9
 	bool
+	select AT91_SAM9_SMC
+	select AT91_SAM9_TIME
 	select CPU_ARM926T
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
-	select AT91_SAM9_TIME
-	select AT91_SAM9_SMC
 
 config SOC_AT91RM9200
 	bool "AT91RM9200"
 	select CPU_ARM920T
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_DBGU0
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
 
 config SOC_AT91SAM9260
 	bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_NET_MACB
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
 	  or AT91SAM9G20 SoC.
 
 config SOC_AT91SAM9261
 	bool "AT91SAM9261 or AT91SAM9G10"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
 
 config SOC_AT91SAM9263
 	bool "AT91SAM9263"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU1
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
+	select SOC_AT91SAM9
 
 config SOC_AT91SAM9RL
 	bool "AT91SAM9RL"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	select SOC_AT91SAM9
 
 config SOC_AT91SAM9G45
 	bool "AT91SAM9G45 or AT91SAM9M10 families"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU1
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
 	  This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
 
 config SOC_AT91SAM9X5
 	bool "AT91SAM9x5 family"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
 	  This means that your SAM9 name finishes with a '5' (except if it is
@@ -97,9 +97,9 @@
 
 config SOC_AT91SAM9N12
 	bool "AT91SAM9N12 family"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using Atmel's AT91SAM9N12 SoC.
 
@@ -144,9 +144,9 @@
 config ARCH_AT91X40
 	bool "AT91x40"
 	depends on !MMU
+	select ARCH_USES_GETTIMEOFFSET
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
-	select ARCH_USES_GETTIMEOFFSET
 
 endchoice
 
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index e613536..263242d 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -23,9 +23,9 @@
 
 config ARCH_EDB7211
 	bool "EDB7211"
-	select ISA
-	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_SELECT_MEMORY_MODEL
+	select ARCH_SPARSEMEM_ENABLE
+	select ISA
 	help
 	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
 	  evaluation board.
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 026b4b2..f8eecb9 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -4,12 +4,12 @@
 	bool
 
 config CP_INTC
-	select IRQ_DOMAIN
 	bool
+	select IRQ_DOMAIN
 
 config ARCH_DAVINCI_DMx
-	select CPU_ARM926T
 	bool
+	select CPU_ARM926T
 
 menu "TI DaVinci Implementations"
 
@@ -32,19 +32,19 @@
 
 config ARCH_DAVINCI_DA830
 	bool "DA830/OMAP-L137/AM17x based system"
-	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
 	select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
+	select CP_INTC
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
-	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
 	select ARCH_HAS_CPUFREQ
+	select CP_INTC
 
 config ARCH_DAVINCI_DA8XX
-	select CPU_ARM926T
 	bool
+	select CPU_ARM926T
 
 config ARCH_DAVINCI_DM365
 	bool "DaVinci 365 based system"
@@ -52,9 +52,9 @@
 	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_TNETV107X
+	bool "TNETV107X based system"
 	select CPU_V6
 	select CP_INTC
-	bool "TNETV107X based system"
 
 comment "DaVinci Board Type"
 
@@ -103,9 +103,9 @@
 	bool "TI DM6467 EVM"
 	default ARCH_DAVINCI_DM646x
 	depends on ARCH_DAVINCI_DM646x
-	select MACH_DAVINCI_DM6467TEVM
 	select EEPROM_AT24
 	select I2C
+	select MACH_DAVINCI_DM6467TEVM
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM6467 EVM
@@ -127,8 +127,8 @@
 	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 	default ARCH_DAVINCI_DA830
 	depends on ARCH_DAVINCI_DA830
-	select GPIO_PCF857X
 	select EEPROM_AT24
+	select GPIO_PCF857X
 	select I2C
 	help
 	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 4372075..da55107 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -31,11 +31,11 @@
 	bool "SAMSUNG EXYNOS4210"
 	default y
 	depends on ARCH_EXYNOS4
-	select SAMSUNG_DMADEV
 	select ARM_CPU_SUSPEND if PM
+	select PM_GENERIC_DOMAINS
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
-	select PM_GENERIC_DOMAINS
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS4210 CPU support
 
@@ -43,9 +43,9 @@
 	bool "SAMSUNG EXYNOS4212"
 	default y
 	depends on ARCH_EXYNOS4
-	select SAMSUNG_DMADEV
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS4212 SoC support
 
@@ -61,9 +61,9 @@
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
-	select SAMSUNG_DMADEV
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS5250 SoC support
 
@@ -189,71 +189,71 @@
 config MACH_SMDKV310
 	bool "SMDKV310"
 	select CPU_EXYNOS4210
-	select S5P_DEV_FIMD0
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S3C_DEV_I2C1
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_G2D
-	select S5P_DEV_I2C_HDMIPHY
-	select S5P_DEV_JPEG
-	select S5P_DEV_MFC
-	select S5P_DEV_TV
-	select S5P_DEV_USB_EHCI
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select S3C_DEV_USB_HSOTG
-	select SAMSUNG_DEV_BACKLIGHT
-	select EXYNOS_DEV_DRM
-	select EXYNOS_DEV_SYSMMU
 	select EXYNOS4_DEV_AHCI
-	select SAMSUNG_DEV_KEYPAD
-	select EXYNOS_DEV_DMA
-	select SAMSUNG_DEV_PWM
 	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_KEYPAD
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS_DEV_SYSMMU
 	select S3C24XX_PWM
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
+	select S5P_DEV_G2D
+	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_JPEG
+	select S5P_DEV_MFC
+	select S5P_DEV_TV
+	select S5P_DEV_USB_EHCI
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_KEYPAD
+	select SAMSUNG_DEV_PWM
 	help
 	  Machine support for Samsung SMDKV310
 
 config MACH_ARMLEX4210
 	bool "ARMLEX4210"
 	select CPU_EXYNOS4210
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
+	select EXYNOS4_DEV_AHCI
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS_DEV_DMA
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
-	select EXYNOS4_DEV_AHCI
-	select EXYNOS_DEV_DMA
-	select EXYNOS4_SETUP_SDHCI
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
 	help
 	  Machine support for Samsung ARMLEX4210 based on EXYNOS4210
 
 config MACH_UNIVERSAL_C210
 	bool "Mobile UNIVERSAL_C210 Board"
-	select CPU_EXYNOS4210
-	select S5P_HRT
 	select CLKSRC_MMIO
+	select CPU_EXYNOS4210
+	select EXYNOS4_SETUP_FIMC
+	select EXYNOS4_SETUP_FIMD0
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C3
+	select EXYNOS4_SETUP_I2C5
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS_DEV_SYSMMU
 	select HAVE_SCHED_CLOCK
-	select S5P_GPIO_INT
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_G2D
-	select S5P_DEV_CSIS0
-	select S5P_DEV_JPEG
-	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
@@ -261,21 +261,21 @@
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
 	select S3C_DEV_USB_HSOTG
+	select S5P_DEV_CSIS0
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
+	select S5P_DEV_G2D
 	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_JPEG
 	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
-	select EXYNOS_DEV_SYSMMU
-	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_DRM
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_I2C3
-	select EXYNOS4_SETUP_I2C5
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_FIMC
+	select S5P_GPIO_INT
+	select S5P_HRT
 	select S5P_SETUP_MIPIPHY
-	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -283,30 +283,6 @@
 config MACH_NURI
 	bool "Mobile NURI Board"
 	select CPU_EXYNOS4210
-	select S5P_GPIO_INT
-	select S3C_DEV_WDT
-	select S3C_DEV_RTC
-	select S5P_DEV_FIMD0
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select S3C_DEV_I2C1
-	select S3C_DEV_I2C3
-	select S3C_DEV_I2C5
-	select S3C_DEV_I2C6
-	select S3C_DEV_USB_HSOTG
-	select S5P_DEV_CSIS0
-	select S5P_DEV_JPEG
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_G2D
-	select S5P_DEV_MFC
-	select S5P_DEV_USB_EHCI
-	select S5P_SETUP_MIPIPHY
-	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_DRM
 	select EXYNOS4_SETUP_FIMC
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
@@ -315,20 +291,51 @@
 	select EXYNOS4_SETUP_I2C6
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C3
+	select S3C_DEV_I2C5
+	select S3C_DEV_I2C6
+	select S3C_DEV_RTC
+	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
+	select S5P_DEV_CSIS0
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
+	select S5P_DEV_G2D
+	select S5P_DEV_JPEG
+	select S5P_DEV_MFC
+	select S5P_DEV_USB_EHCI
+	select S5P_GPIO_INT
 	select S5P_SETUP_MIPIPHY
-	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_PWM
 	help
 	  Machine support for Samsung Mobile NURI Board.
 
 config MACH_ORIGEN
 	bool "ORIGEN"
 	select CPU_EXYNOS4210
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
+	select EXYNOS4_DEV_USB_OHCI
+	select EXYNOS4_SETUP_FIMD0
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS_DEV_SYSMMU
+	select S3C24XX_PWM
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
+	select S3C_DEV_RTC
 	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
@@ -342,14 +349,6 @@
 	select S5P_DEV_USB_EHCI
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
-	select EXYNOS_DEV_DRM
-	select EXYNOS_DEV_SYSMMU
-	select EXYNOS_DEV_DMA
-	select EXYNOS4_DEV_USB_OHCI
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	select S3C24XX_PWM
 	help
 	  Machine support for ORIGEN based on Samsung EXYNOS4210
 
@@ -357,7 +356,17 @@
 
 config MACH_SMDK4212
 	bool "SMDK4212"
-	select SOC_EXYNOS4212
+	select EXYNOS4_SETUP_FIMD0
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C3
+	select EXYNOS4_SETUP_I2C7
+	select EXYNOS4_SETUP_KEYPAD
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS_DEV_SYSMMU
+	select S3C24XX_PWM
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select S3C_DEV_I2C1
@@ -375,17 +384,7 @@
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
-	select EXYNOS_DEV_SYSMMU
-	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_DRM
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_I2C3
-	select EXYNOS4_SETUP_I2C7
-	select EXYNOS4_SETUP_KEYPAD
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	select S3C24XX_PWM
+	select SOC_EXYNOS4212
 	help
 	  Machine support for Samsung SMDK4212
 
@@ -393,8 +392,8 @@
 
 config MACH_SMDK4412
 	bool "SMDK4412"
-	select SOC_EXYNOS4412
 	select MACH_SMDK4212
+	select SOC_EXYNOS4412
 	help
 	  Machine support for Samsung SMDK4412
 endif
@@ -404,12 +403,12 @@
 config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
 	depends on ARCH_EXYNOS4
-	select CPU_EXYNOS4210
-	select USE_OF
 	select ARM_AMBA
+	select CPU_EXYNOS4210
 	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
 	select PINCTRL
 	select PINCTRL_EXYNOS4
+	select USE_OF
 	help
 	  Machine support for Samsung Exynos4 machine with device tree enabled.
 	  Select this if a fdt blob is available for the Exynos4 SoC based board.
@@ -419,9 +418,9 @@
 config MACH_EXYNOS5_DT
 	bool "SAMSUNG EXYNOS5 Machine using device tree"
 	depends on ARCH_EXYNOS5
+	select ARM_AMBA
 	select SOC_EXYNOS5250
 	select USE_OF
-	select ARM_AMBA
 	help
 	  Machine support for Samsung EXYNOS5 machine with device tree enabled.
 	  Select this if a fdt blob is available for the EXYNOS5 SoC based board.
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index f643ef8..abda5a1 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -91,7 +91,7 @@
 
 # EBSA285 board in either host or addin mode
 config ARCH_EBSA285
-	select ARCH_MAY_HAVE_PC_FDC
 	bool
+	select ARCH_MAY_HAVE_PC_FDC
 
 endif
diff --git a/arch/arm/mach-h720x/Kconfig b/arch/arm/mach-h720x/Kconfig
index abf356c..6bb755b 100644
--- a/arch/arm/mach-h720x/Kconfig
+++ b/arch/arm/mach-h720x/Kconfig
@@ -12,9 +12,9 @@
 
 config ARCH_H7202
 	bool "hms30c7202"
+	depends on ARCH_H720X
 	select CPU_H7202
 	select ZONE_DMA
-	depends on ARCH_H720X
 	help
 	  Say Y here if you are using the Hynix HMS30C7202 Reference Board
 
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 32197c1..8d27658 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -41,68 +41,68 @@
 
 config SOC_IMX21
 	bool
-	select MACH_MX21
-	select CPU_ARM926T
 	select COMMON_CLK
+	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
+	select MACH_MX21
 	select MXC_AVIC
 
 config SOC_IMX25
 	bool
 	select ARCH_MX25
+	select ARCH_MXC_IOMUX_V3
 	select COMMON_CLK
 	select CPU_ARM926T
 	select HAVE_CAN_FLEXCAN if CAN
-	select ARCH_MXC_IOMUX_V3
 	select MXC_AVIC
 
 config SOC_IMX27
 	bool
-	select MACH_MX27
-	select CPU_ARM926T
 	select COMMON_CLK
+	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
+	select MACH_MX27
 	select MXC_AVIC
 
 config SOC_IMX31
 	bool
+	select COMMON_CLK
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select MXC_AVIC
-	select COMMON_CLK
 	select SMP_ON_UP if SMP
 
 config SOC_IMX35
 	bool
-	select CPU_V6K
 	select ARCH_MXC_IOMUX_V3
 	select COMMON_CLK
+	select CPU_V6K
+	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_EPIT
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
-	select HAVE_CAN_FLEXCAN if CAN
 
 config SOC_IMX5
-	select CPU_V7
-	select MXC_TZIC
-	select COMMON_CLK
-	select ARCH_MXC_IOMUX_V3
+	bool
 	select ARCH_HAS_CPUFREQ
 	select ARCH_MX5
-	bool
+	select ARCH_MXC_IOMUX_V3
+	select COMMON_CLK
+	select CPU_V7
+	select MXC_TZIC
 
 config SOC_IMX50
 	bool
-	select SOC_IMX5
 	select ARCH_MX50
+	select SOC_IMX5
 
 config	SOC_IMX51
 	bool
-	select SOC_IMX5
 	select ARCH_MX5
 	select ARCH_MX51
 	select PINCTRL
 	select PINCTRL_IMX51
+	select SOC_IMX5
 
 if ARCH_IMX_V4_V5
 
@@ -112,10 +112,10 @@
 
 config ARCH_MX1ADS
 	bool "MX1ADS platform"
-	select MACH_MXLADS
-	select SOC_IMX1
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select MACH_MXLADS
+	select SOC_IMX1
 	help
 	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
 
@@ -127,9 +127,9 @@
 
 config MACH_APF9328
 	bool "APF9328"
-	select SOC_IMX1
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX1
 	help
 	  Say Yes here if you are using the Armadeus APF9328 development board
 
@@ -137,11 +137,11 @@
 
 config MACH_MX21ADS
 	bool "MX21ADS platform"
-	select SOC_IMX21
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select SOC_IMX21
 	help
 	  Include support for MX21ADS platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -150,22 +150,21 @@
 
 config MACH_MX25_3DS
 	bool "Support MX25PDK (3DS) Platform"
-	select SOC_IMX25
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMXDI_RTC
-	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select SOC_IMX25
 
 config MACH_EUKREA_CPUIMX25SD
 	bool "Support Eukrea CPUIMX25 Platform"
-	select SOC_IMX25
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
@@ -177,6 +176,7 @@
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX25
 
 choice
 	prompt "Baseboard"
@@ -199,20 +199,19 @@
 
 config MACH_MX27ADS
 	bool "MX27ADS platform"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
+	select SOC_IMX27
 	help
 	  Include support for MX27ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_PCM038
 	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
@@ -221,6 +220,7 @@
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
 	help
 	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 	  includes specific configurations for the module and its peripherals.
@@ -242,7 +242,6 @@
 
 config MACH_CPUIMX27
 	bool "Eukrea CPUIMX27 module"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -251,6 +250,7 @@
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
 	help
 	  Include support for Eukrea CPUIMX27 platform. This includes
 	  specific configurations for the module and its peripherals.
@@ -292,7 +292,6 @@
 
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_FB
@@ -306,13 +305,13 @@
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_DEBUG_BOARD
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
 	help
 	  Include support for MX27PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_IMX27_VISSTRIM_M10
 	bool "Vista Silicon i.MX27 Visstrim_m10"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
@@ -321,6 +320,7 @@
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select LEDS_GPIO_REGISTER
+	select SOC_IMX27
 	help
 	  Include support for Visstrim_m10 platform and its different variants.
 	  This includes specific configurations for the board and its
@@ -328,16 +328,15 @@
 
 config MACH_IMX27LITE
 	bool "LogicPD MX27 LITEKIT platform"
-	select SOC_IMX27
-	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX27
 	help
 	  Include support for MX27 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_PCA100
 	bool "Phytec phyCARD-s (pca100)"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_FB
@@ -350,27 +349,28 @@
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
 	help
 	  Include support for phyCARD-s (aka pca100) platform. This
 	  includes specific configurations for the module and its peripherals.
 
 config MACH_MXT_TD60
 	bool "Maxtrack i-MXT TD60"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select SOC_IMX27
 	help
 	  Include support for i-MXT (aka td60) platform. This
 	  includes specific configurations for the module and its peripherals.
 
 config MACH_IMX27IPCAM
 	bool "IMX27 IPCAM platform"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX27
 	help
 	  Include support for IMX27 IPCAM platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -390,11 +390,11 @@
 
 config MACH_MX31ADS
 	bool "Support MX31ADS platforms"
-	select SOC_IMX31
+	default y
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
-	default y
+	select SOC_IMX31
 	help
 	  Include support for MX31ADS platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -412,21 +412,19 @@
 
 config MACH_MX31LILLY
 	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for mx31 based LILLY1131 modules. This includes
 	  specific configurations for the board and its peripherals.
 
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
-	select SOC_IMX31
-	select MXC_ULPI if USB_ULPI
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
@@ -435,13 +433,14 @@
 	select IMX_HAVE_PLATFORM_MXC_RTC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_PCM037
 	bool "Support Phytec pcm037 (i.MX31) platforms"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -452,6 +451,7 @@
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -468,8 +468,6 @@
 
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
-	select SOC_IMX31
-	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -481,7 +479,9 @@
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_DEBUG_BOARD
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -497,7 +497,6 @@
 
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -509,22 +508,22 @@
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
 	  specific configurations for the board and its peripherals.
 
 config MACH_ARMADILLO5X0
 	bool "Support Atmark Armadillo-500 Development Base Board"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
@@ -533,23 +532,24 @@
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for Atmark Armadillo-500 platform. This includes
 	  specific configurations for the board and its peripherals.
 
 config MACH_KZM_ARM11_01
 	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
 	help
 	  Include support for KZM-ARM11-01. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_BUG
 	bool "Support Buglabs BUGBase platform"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
 	default y
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
 	help
 	  Include support for BUGBase 1.3 platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -565,7 +565,6 @@
 
 config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
-	select SOC_IMX35
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
@@ -577,14 +576,13 @@
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX35
 	help
 	  Include support for Phytec pcm043 platform. This includes
 	  specific configurations for the board and its peripherals.
 
 config MACH_MX35_3DS
 	bool "Support MX35PDK platform"
-	select SOC_IMX35
-	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_FB
@@ -595,13 +593,14 @@
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_RTC
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_DEBUG_BOARD
+	select SOC_IMX35
 	help
 	  Include support for MX35PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_EUKREA_CPUIMX35SD
 	bool "Support Eukrea CPUIMX35 Platform"
-	select SOC_IMX35
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
@@ -611,6 +610,7 @@
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX35
 	help
 	  Include support for Eukrea CPUIMX35 platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -635,16 +635,16 @@
 
 config MACH_VPR200
 	bool "Support VPR200 platform"
-	select SOC_IMX35
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select SOC_IMX35
 	help
 	  Include support for VPR200 platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -654,11 +654,11 @@
 config MACH_MX50_RDP
 	bool "Support MX50 reference design platform"
 	depends on BROKEN
-	select SOC_IMX50
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select SOC_IMX50
 	help
 	  Include support for MX50 reference design platform (RDP) board. This
 	  includes specific configurations for the board and its peripherals.
@@ -667,15 +667,14 @@
 
 config MACH_IMX51_DT
 	bool "Support i.MX51 platforms from device tree"
-	select SOC_IMX51
 	select MACH_MX51_BABBAGE
+	select SOC_IMX51
 	help
 	  Include support for Freescale i.MX51 based platforms
 	  using the device tree for discovery
 
 config MACH_MX51_BABBAGE
 	bool "Support MX51 BABBAGE platforms"
-	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -683,6 +682,7 @@
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select SOC_IMX51
 	help
 	  Include support for MX51 Babbage platform, also known as MX51EVK in
 	  u-boot. This includes specific configurations for the board and its
@@ -690,27 +690,27 @@
 
 config MACH_MX51_3DS
 	bool "Support MX51PDK (3DS)"
-	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_DEBUG_BOARD
+	select SOC_IMX51
 	help
 	  Include support for MX51PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_EUKREA_CPUIMX51SD
 	bool "Support Eukrea CPUIMX51SD module"
-	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select SOC_IMX51
 	help
 	  Include support for Eukrea CPUIMX51SD platform. This includes
 	  specific configurations for the module and its peripherals.
@@ -736,12 +736,12 @@
 
 config	SOC_IMX53
 	bool "i.MX53 support"
-	select SOC_IMX5
 	select ARCH_MX5
 	select ARCH_MX53
 	select HAVE_CAN_FLEXCAN if CAN
 	select PINCTRL
 	select PINCTRL_IMX53
+	select SOC_IMX5
 
 	help
 	  This enables support for Freescale i.MX53 processor.
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index fd5e7b6..73a2d90 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -234,8 +234,8 @@
 
 config IXP4XX_NPE
 	tristate "IXP4xx Network Processor Engine support"
-	select HOTPLUG
 	select FW_LOADER
+	select HOTPLUG
 	help
 	  This driver supports IXP4xx built-in network coprocessors
 	  and is automatically selected by Ethernet and HSS drivers.
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index d697d07..178d4da 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -107,22 +107,22 @@
 
 config CPU_PXA168
 	bool
-	select CPU_MOHAWK
 	select COMMON_CLK
+	select CPU_MOHAWK
 	help
 	  Select code specific to PXA168
 
 config CPU_PXA910
 	bool
-	select CPU_MOHAWK
 	select COMMON_CLK
+	select CPU_MOHAWK
 	help
 	  Select code specific to PXA910
 
 config CPU_MMP2
 	bool
-	select CPU_PJ4
 	select COMMON_CLK
+	select CPU_PJ4
 	help
 	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
 
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 7902de15..b619085 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -10,35 +10,35 @@
 
 config ARCH_MSM7X00A
 	bool "MSM7x00A / MSM7x01A"
-	select MACH_TROUT if !MACH_HALIBUT
 	select ARCH_MSM_ARM11
-	select MSM_SMD
-	select MSM_SMD_PKG3
 	select CPU_V6
 	select GPIO_MSM_V1
+	select MACH_TROUT if !MACH_HALIBUT
 	select MSM_PROC_COMM
+	select MSM_SMD
+	select MSM_SMD_PKG3
 
 config ARCH_MSM7X30
 	bool "MSM7x30"
-	select MACH_MSM7X30_SURF # if !
 	select ARCH_MSM_SCORPION
+	select CPU_V7
+	select GPIO_MSM_V1
+	select MACH_MSM7X30_SURF # if !
+	select MSM_GPIOMUX
+	select MSM_PROC_COMM
 	select MSM_SMD
 	select MSM_VIC
-	select CPU_V7
-	select MSM_GPIOMUX
-	select GPIO_MSM_V1
-	select MSM_PROC_COMM
 
 config ARCH_QSD8X50
 	bool "QSD8X50"
-	select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
 	select ARCH_MSM_SCORPION
+	select CPU_V7
+	select GPIO_MSM_V1
+	select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
+	select MSM_GPIOMUX
+	select MSM_PROC_COMM
 	select MSM_SMD
 	select MSM_VIC
-	select CPU_V7
-	select MSM_GPIOMUX
-	select GPIO_MSM_V1
-	select MSM_PROC_COMM
 
 endchoice
 
@@ -47,10 +47,10 @@
 	select ARCH_MSM_SCORPIONMP
 	select ARM_GIC
 	select CPU_V7
-	select MSM_V2_TLMM
 	select GPIO_MSM_V2
 	select MSM_GPIOMUX
 	select MSM_SCM if SMP
+	select MSM_V2_TLMM
 	select USE_OF
 
 config ARCH_MSM8960
@@ -58,9 +58,9 @@
 	select ARCH_MSM_SCORPIONMP
 	select ARM_GIC
 	select CPU_V7
-	select MSM_V2_TLMM
 	select MSM_GPIOMUX
 	select MSM_SCM if SMP
+	select MSM_V2_TLMM
 	select USE_OF
 
 config MSM_HAS_DEBUG_UART_HS
@@ -110,8 +110,8 @@
 
 config MACH_QSD8X50A_ST1_5
 	depends on ARCH_QSD8X50
-	select MSM_SOC_REV_A
 	bool "QSD8x50A ST1.5"
+	select MSM_SOC_REV_A
 	help
 	  Support for the Qualcomm ST1.5.
 
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 365879b..c744946 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -4,8 +4,8 @@
 
 config MACH_NOMADIK_8815NHK
 	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
-	select NOMADIK_8815
 	select HAS_MTU
+	select NOMADIK_8815
 
 endmenu
 
@@ -16,7 +16,7 @@
 	tristate "Driver for bit-bang busses found on the 8815 NHK"
 	depends on I2C && MACH_NOMADIK_8815NHK
 	depends on PINCTRL_NOMADIK
-	select I2C_ALGOBIT
 	default y
+	select I2C_ALGOBIT
 
 endif
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index cba3f71..903da8e 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -8,15 +8,15 @@
 config ARCH_OMAP730
 	depends on ARCH_OMAP1
 	bool "OMAP730 Based System"
+	select ARCH_OMAP_OTG
 	select CPU_ARM926T
 	select OMAP_MPU_TIMER
-	select ARCH_OMAP_OTG
 
 config ARCH_OMAP850
 	depends on ARCH_OMAP1
 	bool "OMAP850 Based System"
-	select CPU_ARM926T
 	select ARCH_OMAP_OTG
+	select CPU_ARM926T
 
 config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
@@ -28,8 +28,8 @@
 config ARCH_OMAP16XX
 	depends on ARCH_OMAP1
 	bool "OMAP16xx Based System"
-	select CPU_ARM926T
 	select ARCH_OMAP_OTG
+	select CPU_ARM926T
 
 comment "OMAP Board Type"
 	depends on ARCH_OMAP1
@@ -132,8 +132,8 @@
 
 config MACH_SX1
 	bool "Siemens SX1"
-	select I2C
 	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	select I2C
 	help
 	  Support for the Siemens SX1 phone. To boot the kernel,
 	  you'll need a SX1 compatible bootloader; check out
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index a6219ea..2a1a898 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -6,19 +6,19 @@
 	bool "Typical OMAP configuration"
 	default y
 	select AEABI
-	select REGULATOR
-	select PM_RUNTIME
-	select VFP
-	select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
-	select SERIAL_OMAP
-	select SERIAL_OMAP_CONSOLE
+	select HIGHMEM
 	select I2C
 	select I2C_OMAP
 	select MENELAUS if ARCH_OMAP2
+	select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
+	select PINCTRL
+	select PM_RUNTIME
+	select REGULATOR
+	select SERIAL_OMAP
+	select SERIAL_OMAP_CONSOLE
 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
 	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
-	select HIGHMEM
-	select PINCTRL
+	select VFP
 	help
 	  Compile a kernel suitable for booting most boards
 
@@ -40,44 +40,44 @@
 	bool "TI OMAP3"
 	depends on ARCH_OMAP2PLUS
 	default y
-	select CPU_V7
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARCH_HAS_OPP
-	select PM_RUNTIME if CPU_IDLE
-	select PM_OPP if PM
 	select ARM_CPU_SUSPEND if PM
+	select CPU_V7
 	select MULTI_IRQ_HANDLER
-	select SOC_HAS_OMAP2_SDRC
 	select OMAP_INTERCONNECT
+	select PM_OPP if PM
+	select PM_RUNTIME if CPU_IDLE
+	select SOC_HAS_OMAP2_SDRC
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
 	default y
 	depends on ARCH_OMAP2PLUS
+	select ARCH_HAS_OPP
+	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
+	select ARM_CPU_SUSPEND if PM
+	select ARM_ERRATA_720789
+	select ARM_GIC
 	select CACHE_L2X0
 	select CPU_V7
-	select ARM_GIC
 	select HAVE_SMP
 	select LOCAL_TIMERS if SMP
+	select OMAP_INTERCONNECT
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
-	select ARM_ERRATA_720789
-	select ARCH_HAS_OPP
-	select PM_RUNTIME if CPU_IDLE
 	select PM_OPP if PM
+	select PM_RUNTIME if CPU_IDLE
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select ARM_CPU_SUSPEND if PM
-	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
-	select OMAP_INTERCONNECT
 
 config SOC_OMAP5
 	bool "TI OMAP5"
-	select CPU_V7
-	select ARM_GIC
-	select HAVE_SMP
-	select ARM_CPU_SUSPEND if PM
-	select SOC_HAS_REALTIME_COUNTER
 	select ARM_ARCH_TIMER
+	select ARM_CPU_SUSPEND if PM
+	select ARM_GIC
+	select CPU_V7
+	select HAVE_SMP
+	select SOC_HAS_REALTIME_COUNTER
 
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
@@ -109,8 +109,8 @@
 config SOC_AM33XX
 	bool "AM33XX support"
 	default y
-	select CPU_V7
 	select ARM_CPU_SUSPEND if PM
+	select CPU_V7
 	select MULTI_IRQ_HANDLER
 
 config OMAP_PACKAGE_ZAF
@@ -157,8 +157,8 @@
 	bool "OMAP 2420 H4 board"
 	depends on SOC_OMAP2420
 	default y
-	select OMAP_PACKAGE_ZAF
 	select OMAP_DEBUG_DEVICES
+	select OMAP_PACKAGE_ZAF
 
 config MACH_OMAP_APOLLON
 	bool "OMAP 2420 Apollon board"
@@ -193,8 +193,8 @@
 config MACH_OMAP3530_LV_SOM
 	bool "OMAP3 Logic 3530 LV SOM board"
 	depends on ARCH_OMAP3
-	select OMAP_PACKAGE_CBB
 	default y
+	select OMAP_PACKAGE_CBB
 	help
 	 Support for the LogicPD OMAP3530 SOM Development kit
 	 for full description please see the products webpage at
@@ -203,8 +203,8 @@
 config MACH_OMAP3_TORPEDO
 	bool "OMAP3 Logic 35x Torpedo board"
 	depends on ARCH_OMAP3
-	select OMAP_PACKAGE_CBB
 	default y
+	select OMAP_PACKAGE_CBB
 	help
 	 Support for the LogicPD OMAP35x Torpedo Development kit
 	 for full description please see the products webpage at
@@ -265,17 +265,17 @@
 	bool "Nokia N800/N810"
 	depends on SOC_OMAP2420
 	default y
-	select OMAP_PACKAGE_ZAC
 	select MACH_NOKIA_N800
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
+	select OMAP_PACKAGE_ZAC
 
 config MACH_NOKIA_RM680
 	bool "Nokia RM-680/696 board"
 	depends on ARCH_OMAP3
 	default y
-	select OMAP_PACKAGE_CBB
 	select MACH_NOKIA_RM696
+	select OMAP_PACKAGE_CBB
 
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
@@ -288,20 +288,20 @@
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBB
-	select SERIAL_8250
-	select SERIAL_CORE_CONSOLE
-	select SERIAL_8250_CONSOLE
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SERIAL_8250
+	select SERIAL_8250_CONSOLE
+	select SERIAL_CORE_CONSOLE
 
 config MACH_OMAP_ZOOM3
 	bool "OMAP3630 Zoom3 board"
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBP
-	select SERIAL_8250
-	select SERIAL_CORE_CONSOLE
-	select SERIAL_8250_CONSOLE
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SERIAL_8250
+	select SERIAL_8250_CONSOLE
+	select SERIAL_CORE_CONSOLE
 
 config MACH_CM_T35
 	bool "CompuLab CM-T35/CM-T3730 modules"
@@ -329,8 +329,8 @@
 	bool "IGEP OMAP3 module"
 	depends on ARCH_OMAP3
 	default y
-	select OMAP_PACKAGE_CBB
 	select MACH_IGEP0020
+	select OMAP_PACKAGE_CBB
 
 config MACH_SBC3530
 	bool "OMAP3 SBC STALKER board"
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 41fc853..558ccfb 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -6,8 +6,8 @@
 	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
 	default y
 	select CPU_V7
-	select ZONE_DMA
 	select SIRF_IRQ
+	select ZONE_DMA
 	help
           Support for CSR SiRFSoC ARM Cortex A9 Platform
 
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 8e6288d..11aa739 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -27,10 +27,10 @@
 
 config MACH_PXA3XX_DT
 	bool "Support PXA3xx platforms from device tree"
-	select PXA3xx
 	select CPU_PXA300
-	select POWER_SUPPLY
 	select HAVE_PWM
+	select POWER_SUPPLY
+	select PXA3xx
 	select USE_OF
 	help
 	  Include support for Marvell PXA3xx based platforms using
@@ -44,13 +44,13 @@
 
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
-	select PXA27x
 	select HAVE_PWM
+	select PXA27x
 
 config MACH_ZYLONITE
 	bool
-	select PXA3xx
 	select HAVE_PWM
+	select PXA3xx
 
 config MACH_ZYLONITE300
 	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
@@ -65,19 +65,19 @@
 
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
-	select PXA3xx
 	select CPU_PXA300
 	select CPU_PXA310
+	select PXA3xx
 
 config MACH_TAVOREVB
 	bool "PXA930 Evaluation Board (aka TavorEVB)"
-	select PXA3xx
 	select CPU_PXA930
+	select PXA3xx
 
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
-	select PXA3xx
 	select CPU_PXA930
+	select PXA3xx
 
 comment "Third Party Dev Platforms (sorted by vendor name)"
 
@@ -87,29 +87,29 @@
 
 config ARCH_VIPER
 	bool "Arcom/Eurotech VIPER SBC"
-	select PXA25x
-	select ISA
-	select I2C_GPIO
-	select HAVE_PWM
-	select PXA_HAVE_ISA_IRQS
 	select ARCOM_PCMCIA
+	select HAVE_PWM
+	select I2C_GPIO
+	select ISA
+	select PXA25x
+	select PXA_HAVE_ISA_IRQS
 
 config MACH_ARCOM_ZEUS
 	bool "Arcom/Eurotech ZEUS SBC"
-	select PXA27x
-	select ISA
-	select PXA_HAVE_ISA_IRQS
 	select ARCOM_PCMCIA
+	select ISA
+	select PXA27x
+	select PXA_HAVE_ISA_IRQS
 
 config MACH_BALLOON3
 	bool "Balloon 3 board"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 
 config MACH_CSB726
 	bool "Enable Cogent CSB726 System On a Module"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a Cogent
 	  CSB726 System On Module.
@@ -121,11 +121,11 @@
 config MACH_ARMCORE
 	bool "CompuLab CM-X255/CM-X270 modules"
 	select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
-	select PXA27x
 	select IWMMXT
-	select PXA25x
 	select MIGHT_HAVE_PCI
 	select NEED_MACH_IO_H if PCI
+	select PXA25x
+	select PXA27x
 
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
@@ -137,10 +137,10 @@
 
 config MACH_CM_X300
 	bool "CompuLab CM-X300 modules"
-	select PXA3xx
 	select CPU_PXA300
 	select CPU_PXA310
 	select HAVE_PWM
+	select PXA3xx
 
 config MACH_CAPC7117
 	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
@@ -168,22 +168,22 @@
 
 config MACH_INTELMOTE2
 	bool "Intel Mote 2 Platform"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 
 config MACH_STARGATE2
 	bool "Intel Stargate 2 Platform"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 
 config MACH_XCEP
 	bool "Iskratel Electronics XCEP"
-	select PXA25x
 	select MTD
-	select MTD_PHYSMAP
-	select MTD_CFI_INTELEXT
 	select MTD_CFI
+	select MTD_CFI_INTELEXT
 	select MTD_CHAR
+	select MTD_PHYSMAP
+	select PXA25x
 	select SMC91X
 	help
 	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
@@ -195,14 +195,14 @@
 config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
 	depends on TRIZEPS_PXA
-	select TRIZEPS_PCMCIA
 	select PXA27x
+	select TRIZEPS_PCMCIA
 
 config MACH_TRIZEPS4WL
 	bool "Keith und Koep Trizeps4-WL DIMM-Module"
 	depends on TRIZEPS_PXA
-	select TRIZEPS_PCMCIA
 	select PXA27x
+	select TRIZEPS_PCMCIA
 
 choice
 	prompt "Select base board for Trizeps module"
@@ -231,18 +231,18 @@
 
 config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
-	select PXA27x
 	select HAVE_PWM
+	select PXA27x
 
 config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
-	select HAVE_PWM
 	depends on MACH_PCM027
+	select HAVE_PWM
 
 choice
 	prompt "display on pcm990"
@@ -266,19 +266,19 @@
 config MACH_COLIBRI_PXA270_INCOME
 	bool "Income s.r.o. PXA270 SBC"
 	depends on MACH_COLIBRI
-	select PXA27x
 	select HAVE_PWM
+	select PXA27x
 
 config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
-	select PXA3xx
 	select CPU_PXA300
 	select CPU_PXA310
+	select PXA3xx
 
 config MACH_COLIBRI320
 	bool "Toradex Colibri PXA320"
-	select PXA3xx
 	select CPU_PXA320
+	select PXA3xx
 
 config MACH_COLIBRI_EVALBOARD
 	bool "Toradex Colibri Evaluation Carrier Board support"
@@ -286,8 +286,8 @@
 
 config MACH_VPAC270
 	bool "Voipac PXA270"
-	select PXA27x
 	select HAVE_PATA_PLATFORM
+	select PXA27x
 	help
 	  PXA270 based Single Board Computer.
 
@@ -295,9 +295,9 @@
 
 config MACH_H4700
 	bool "HP iPAQ hx4700"
-	select PXA27x
-	select IWMMXT
 	select HAVE_PWM
+	select IWMMXT
+	select PXA27x
 
 config MACH_H5000
 	bool "HP iPAQ h5000"
@@ -309,16 +309,16 @@
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
-	select PXA27x
-	select IWMMXT
 	select HAVE_PWM
+	select IWMMXT
+	select PXA27x
 
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
 	select GPIO_SYSFS
+	select HAVE_PWM
+	select IWMMXT
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a
 	  MIO A701. Currently there is only basic support
@@ -326,9 +326,9 @@
 
 config PXA_EZX
 	bool "Motorola EZX Platform"
-	select PXA27x
-	select IWMMXT
 	select HAVE_PWM
+	select IWMMXT
+	select PXA27x
 
 config MACH_EZX_A780
 	bool "Motorola EZX A780"
@@ -393,9 +393,9 @@
 	bool "Palm Tungsten|T5"
 	default y
 	depends on ARCH_PXA_PALM
-	select PXA27x
 	select IWMMXT
 	select MACH_PALM27X
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
 	  handheld computer.
@@ -404,9 +404,9 @@
 	bool "Palm T|X"
 	default y
 	depends on ARCH_PXA_PALM
-	select PXA27x
 	select IWMMXT
 	select MACH_PALM27X
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a Palm T|X
 	  handheld computer.
@@ -415,9 +415,9 @@
 	bool "Palm Zire 72"
 	default y
 	depends on ARCH_PXA_PALM
-	select PXA27x
 	select IWMMXT
 	select MACH_PALM27X
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on Palm Zire 72
 	  handheld computer.
@@ -426,9 +426,9 @@
 	bool "Palm LifeDrive"
 	default y
 	depends on ARCH_PXA_PALM
-	select PXA27x
 	select IWMMXT
 	select MACH_PALM27X
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a Palm LifeDrive
 	  handheld computer.
@@ -441,10 +441,10 @@
 	bool "Palm Centro 685 (GSM)"
 	default y
 	depends on ARCH_PXA_PALM
-	select MACH_PALM27X
-	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	select PALM_TREO
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
 	  smartphone.
@@ -453,37 +453,37 @@
 	bool "Palm Treo 680"
 	default y
 	depends on ARCH_PXA_PALM
-	select MACH_PALM27X
-	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	select PALM_TREO
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on Palm Treo 680
 	  smartphone.
 
 config MACH_RAUMFELD_RC
 	bool "Raumfeld Controller"
-	select PXA3xx
 	select CPU_PXA300
-	select POWER_SUPPLY
 	select HAVE_PWM
+	select POWER_SUPPLY
+	select PXA3xx
 
 config MACH_RAUMFELD_CONNECTOR
 	bool "Raumfeld Connector"
+	select CPU_PXA300
 	select POWER_SUPPLY
 	select PXA3xx
-	select CPU_PXA300
 
 config MACH_RAUMFELD_SPEAKER
 	bool "Raumfeld Speaker"
+	select CPU_PXA300
 	select POWER_SUPPLY
 	select PXA3xx
-	select CPU_PXA300
 
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
-	select SHARP_SCOOP
 	select SHARP_PARAM
+	select SHARP_SCOOP
 	help
 	  Say Y here if you intend to run this kernel on a
 	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
@@ -526,11 +526,11 @@
 config MACH_AKITA
 	bool "Enable Sharp SL-1000 (Akita) Support"
 	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-	select MACH_SPITZ
 	select I2C
 	select I2C_PXA
+	select MACH_SPITZ
+	select PXA27x
+	select PXA_SHARP_Cxx00
 
 config MACH_SPITZ
 	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
@@ -575,8 +575,8 @@
 
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
-	select PXA25x
 	select FB_W100
+	select PXA25x
 
 config MACH_E330
 	bool "Toshiba e330"
@@ -628,8 +628,8 @@
 
 config MACH_ZIPIT2
 	bool "Zipit Z2 Handheld"
-	select PXA27x
 	select HAVE_PWM
+	select PXA27x
 endif
 endmenu
 
@@ -720,9 +720,9 @@
 config SHARPSL_PM_MAX1111
 	bool
 	select HWMON
+	select SENSORS_MAX1111
 	select SPI
 	select SPI_MASTER
-	select SENSORS_MAX1111
 
 config PXA_HAVE_ISA_IRQS
 	bool
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index c593be4..14c1d47 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -21,8 +21,8 @@
 config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore Tile"
 	depends on MACH_REALVIEW_EB
-	select CPU_V6K
 	select ARCH_HAS_BARRIERS if SMP
+	select CPU_V6K
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -40,12 +40,12 @@
 
 config MACH_REALVIEW_PB11MP
 	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
-	select CPU_V6K
+	select ARCH_HAS_BARRIERS if SMP
 	select ARM_GIC
+	select CPU_V6K
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
-	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
 	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
@@ -54,8 +54,8 @@
 # ARMv6 CPU without K extensions, but does have the new exclusive ops
 config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
-	select CPU_V6
 	select ARM_GIC
+	select CPU_V6
 	select HAVE_TCM
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -73,8 +73,8 @@
 
 config MACH_REALVIEW_PBA8
 	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
-	select CPU_V7
 	select ARM_GIC
+	select CPU_V7
 	select HAVE_PATA_PLATFORM
 	help
 	  Include support for the ARM(R) RealView Platform Baseboard for
@@ -83,11 +83,11 @@
 
 config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore"
+	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
-	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index c5256f4..495f692 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -7,7 +7,7 @@
 config S3C2412_CPUFREQ
 	bool
 	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
-	select S3C2412_IOTIMING
 	default y
+	select S3C2412_IOTIMING
 	help
 	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index ece7a10..a4d7fd2 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -5,8 +5,8 @@
 config S3C2440_CPUFREQ
 	bool "S3C2440/S3C2442 CPU Frequency scaling support"
 	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
-	select S3C2410_CPUFREQ_UTILS
 	default y
+	select S3C2410_CPUFREQ_UTILS
 	help
 	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
 
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index d56b0f7..2b6cb5f 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -17,10 +17,10 @@
 	bool "SAMSUNG S3C2410"
 	default y
 	select CPU_ARM920T
-	select S3C2410_CLOCK
 	select CPU_LLSERIAL_S3C2410
-	select S3C2410_PM if PM
+	select S3C2410_CLOCK
 	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+	select S3C2410_PM if PM
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -30,8 +30,8 @@
 	depends on ARCH_S3C24XX
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2412_PM if PM
 	select S3C2412_DMA if S3C24XX_DMA
+	select S3C2412_PM if PM
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
@@ -40,10 +40,10 @@
 	depends on ARCH_S3C24XX
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
-	select SAMSUNG_CLKSRC
+	select S3C2416_PM if PM
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
-	select S3C2416_PM if PM
+	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
@@ -75,9 +75,9 @@
 	depends on ARCH_S3C24XX
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select SAMSUNG_CLKSRC
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
+	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
@@ -156,16 +156,16 @@
 
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
-	select S3C2410_IOTIMING if S3C2410_CPUFREQ
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C24XX_SIMTEC_NOR
-	select S3C24XX_SIMTEC_USB
-	select MACH_BAST_IDE
-	select S3C24XX_DCLK
 	select ISA
+	select MACH_BAST_IDE
+	select S3C2410_IOTIMING if S3C2410_CPUFREQ
+	select S3C24XX_DCLK
+	select S3C24XX_SIMTEC_NOR
+	select S3C24XX_SIMTEC_PM if PM
+	select S3C24XX_SIMTEC_USB
 	select S3C_DEV_HWMON
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)
@@ -181,9 +181,9 @@
 config ARCH_H1940
 	bool "IPAQ H1940"
 	select PM_H1940 if PM
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
 	select S3C24XX_SETUP_TS
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -203,23 +203,23 @@
 config MACH_N30
 	bool "Acer N30 family"
 	select MACH_N35
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
 
 config MACH_OTOM
 	bool "NexVision OTOM Board"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Nex Vision OTOM board
 
 config MACH_QT2410
 	bool "QT2410"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Armzone QT2410
 
@@ -239,12 +239,12 @@
 
 config MACH_VR1000
 	bool "Thorcom VR1000"
-	select S3C24XX_SIMTEC_PM if PM
+	select MACH_BAST_IDE
 	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_NOR
-	select MACH_BAST_IDE
-	select S3C_DEV_USB_HOST
+	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
@@ -285,8 +285,8 @@
 
 config MACH_JIVE
 	bool "Logitech Jive"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Logitech Jive.
 
@@ -314,15 +314,15 @@
 	bool "SMDK2413"
 	select MACH_S3C2413
 	select S3C24XX_SMDK
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an SMDK2413
 
 config MACH_VSTMS
 	bool "VMSTMS"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an VSTMS board
 
@@ -351,13 +351,13 @@
 
 config MACH_SMDK2416
 	bool "SMDK2416"
+	select S3C2416_SETUP_SDHCI
 	select S3C24XX_SMDK
 	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
-	select S3C2416_SETUP_SDHCI
 	help
 	  Say Y here if you are using an SMDK2416
 
@@ -379,11 +379,11 @@
 
 config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
-	select S3C24XX_DCLK
-	select S3C24XX_SIMTEC_PM if PM
 	select HAVE_PATA_PLATFORM
-	select S3C24XX_GPIO_EXTRA64
 	select S3C2440_XTAL_12000000
+	select S3C24XX_DCLK
+	select S3C24XX_GPIO_EXTRA64
+	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
@@ -391,18 +391,18 @@
 
 config MACH_AT2440EVB
 	bool "Avantech AT2440EVB development board"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the AT2440EVB development board
 
 config MACH_MINI2440
 	bool "MINI2440 development board"
 	select EEPROM_AT24
-	select NEW_LEDS
 	select LEDS_CLASS
 	select LEDS_TRIGGER
 	select LEDS_TRIGGER_BACKLIGHT
+	select NEW_LEDS
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
 	help
@@ -412,20 +412,20 @@
 config MACH_NEXCODER_2440
 	bool "NexVision NEXCODER 2440 Light Board"
 	select S3C2440_XTAL_12000000
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
-	select S3C24XX_DCLK
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C24XX_GPIO_EXTRA128
-	select S3C2440_XTAL_12000000
 	select S3C2410_IOTIMING if S3C2440_CPUFREQ
-	select S3C_DEV_USB_HOST
+	select S3C2440_XTAL_12000000
+	select S3C24XX_DCLK
+	select S3C24XX_GPIO_EXTRA128
+	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
@@ -445,8 +445,8 @@
 
 config MACH_RX3715
 	bool "HP iPAQ rx3715"
-	select S3C2440_XTAL_16934400
 	select PM_H1940 if PM
+	select S3C2440_XTAL_16934400
 	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the HP iPAQ rx3715.
@@ -455,8 +455,8 @@
 	bool "SMDK2440"
 	select S3C2440_XTAL_16934400
 	select S3C24XX_SMDK
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the SMDK2440.
 
@@ -478,11 +478,11 @@
 
 config MACH_NEO1973_GTA02
 	bool "Openmoko GTA02 / Freerunner phone"
+	select I2C
+	select MACH_NEO1973
 	select MFD_PCF50633
 	select PCF50633_GPIO
-	select I2C
 	select POWER_SUPPLY
-	select MACH_NEO1973
 	select S3C24XX_PWM
 	select S3C_DEV_USB_HOST
 	help
@@ -490,13 +490,13 @@
 
 config MACH_RX1950
 	bool "HP iPAQ rx1950"
-	select S3C24XX_DCLK
-	select PM_H1940 if PM
 	select I2C
-	select S3C24XX_PWM
-	select S3C_DEV_NAND
+	select PM_H1940 if PM
 	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
+	select S3C24XX_DCLK
+	select S3C24XX_PWM
+	select S3C_DEV_NAND
 	help
 	   Say Y here if you're using HP iPAQ rx1950
 
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 06ca1cd..63e7ae3 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -7,9 +7,9 @@
 config PLAT_S3C64XX
 	bool
 	depends on ARCH_S3C64XX
-	select SAMSUNG_WAKEMASK
-	select PM_GENERIC_DOMAINS
 	default y
+	select PM_GENERIC_DOMAINS
+	select SAMSUNG_WAKEMASK
 	help
 	  Base platform code for any Samsung S3C64XX device
 
@@ -31,8 +31,8 @@
 	select S3C_DMA
 
 config S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_SDHCI_GPIO
 	bool
+	select S3C64XX_SETUP_SDHCI_GPIO
 	help
 	  Internal configuration for default SDHCI setup for S3C6400 and
 	  S3C6410 SoCs.
@@ -93,9 +93,9 @@
 config MACH_SMDK6400
        bool "SMDK6400"
 	select CPU_S3C6400
+	select S3C64XX_SETUP_SDHCI
 	select S3C_DEV_HSMMC
 	select S3C_DEV_NAND
-	select S3C64XX_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDK6400
 
@@ -104,21 +104,21 @@
 config MACH_ANW6410
 	bool "A&W6410"
 	select CPU_S3C6410
-	select S3C_DEV_FB
 	select S3C64XX_SETUP_FB_24BPP
+	select S3C_DEV_FB
 	help
 	  Machine support for the A&W6410
 
 config MACH_MINI6410
 	bool "MINI6410"
 	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_SDHCI
+	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
-	select S3C_DEV_FB
-	select S3C64XX_SETUP_FB_24BPP
+	select S3C_DEV_USB_HOST
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_TS
 	help
@@ -127,42 +127,42 @@
 config MACH_REAL6410
 	bool "REAL6410"
 	select CPU_S3C6410
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_SDHCI
 	select S3C_DEV_FB
-	select S3C64XX_SETUP_FB_24BPP
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_TS
-	select S3C_DEV_USB_HOST
 	help
 	  Machine support for the CoreWind REAL6410
 
 config MACH_SMDK6410
 	bool "SMDK6410"
 	select CPU_S3C6410
-	select SAMSUNG_DEV_ADC
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_IDE
+	select S3C64XX_SETUP_KEYPAD
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_USB_PHY
+	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
-	select SAMSUNG_DEV_IDE
-	select S3C_DEV_FB
 	select S3C_DEV_RTC
-	select SAMSUNG_DEV_TS
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
+	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_IDE
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_I2C1
-	select S3C64XX_SETUP_IDE
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_KEYPAD
-	select S3C64XX_SETUP_USB_PHY
+	select SAMSUNG_DEV_TS
 	help
 	  Machine support for the Samsung SMDK6410
 
@@ -198,13 +198,13 @@
 config SMDK6410_WM1190_EV1
 	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
 	depends on MACH_SMDK6410
+	select MFD_WM8350_CONFIG_MODE_0
+	select MFD_WM8350_CONFIG_MODE_3
+	select MFD_WM8350_I2C
+	select MFD_WM8352_CONFIG_MODE_0
 	select REGULATOR
 	select REGULATOR_WM8350
 	select SAMSUNG_GPIO_EXTRA64
-	select MFD_WM8350_I2C
-	select MFD_WM8350_CONFIG_MODE_0
-	select MFD_WM8350_CONFIG_MODE_3
-	select MFD_WM8352_CONFIG_MODE_0
 	help
 	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
 	  and audio daughtercard for the Samsung SMDK6410 reference
@@ -216,11 +216,11 @@
 config SMDK6410_WM1192_EV1
 	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
 	depends on MACH_SMDK6410
+	select MFD_WM831X
+	select MFD_WM831X_I2C
 	select REGULATOR
 	select REGULATOR_WM831X
 	select SAMSUNG_GPIO_EXTRA64
-	select MFD_WM831X
-	select MFD_WM831X_I2C
 	help
 	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
 	  daughtercard for the Samsung SMDK6410 reference platform.
@@ -232,19 +232,19 @@
 config MACH_NCP
 	bool "NCP"
 	select CPU_S3C6410
-	select S3C_DEV_I2C1
-	select S3C_DEV_HSMMC1
 	select S3C64XX_SETUP_I2C1
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_I2C1
 	help
           Machine support for the Samsung NCP
 
 config MACH_HMT
 	bool "Airgoo HMT"
 	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
 	select S3C_DEV_FB
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
-	select S3C64XX_SETUP_FB_24BPP
 	select SAMSUNG_DEV_PWM
 	help
 	  Machine support for the Airgoo HMT
@@ -252,17 +252,17 @@
 config MACH_SMARTQ
 	bool
 	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_USB_PHY
+	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
-	select S3C_DEV_FB
 	select S3C_DEV_HWMON
 	select S3C_DEV_RTC
-	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_USB_HOST
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_USB_PHY
+	select S3C_DEV_USB_HSOTG
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
@@ -284,26 +284,26 @@
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
 	select CPU_S3C6410
-	select S3C64XX_SETUP_SDHCI
+	select I2C
+	select LEDS_GPIO_REGISTER
+	select S3C64XX_DEV_SPI0
+	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_IDE
-	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_KEYPAD
+	select S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_SPI
 	select S3C64XX_SETUP_USB_PHY
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_KEYPAD
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_I2C1
-	select S3C_DEV_WDT
 	select S3C_DEV_RTC
-	select S3C64XX_DEV_SPI0
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_GPIO_EXTRA128
-	select I2C
-	select LEDS_GPIO_REGISTER
 	help
 	  Machine support for the Wolfson Cragganmore S3C6410 variant.
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index c87f610..e8742cb 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -9,18 +9,18 @@
 
 config CPU_S5P6440
 	bool
-	select SAMSUNG_DMADEV
 	select S5P_HRT
 	select S5P_SLEEP if PM
+	select SAMSUNG_DMADEV
 	select SAMSUNG_WAKEMASK if PM
 	help
 	  Enable S5P6440 CPU support
 
 config CPU_S5P6450
 	bool
-	select SAMSUNG_DMADEV
 	select S5P_HRT
 	select S5P_SLEEP if PM
+	select SAMSUNG_DMADEV
 	select SAMSUNG_WAKEMASK if PM
 	help
 	  Enable S5P6450 CPU support
@@ -52,19 +52,19 @@
 	bool "SMDK6440"
 	select CPU_S5P6440
 	select S3C_DEV_FB
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S5P64X0_SETUP_FB_24BPP
+	select S5P64X0_SETUP_I2C1
+	select S5P64X0_SETUP_SDHCI_GPIO
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
-	select S5P64X0_SETUP_FB_24BPP
-	select S5P64X0_SETUP_I2C1
-	select S5P64X0_SETUP_SDHCI_GPIO
 	help
 	  Machine support for the Samsung SMDK6440
 
@@ -72,19 +72,19 @@
 	bool "SMDK6450"
 	select CPU_S5P6450
 	select S3C_DEV_FB
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S5P64X0_SETUP_FB_24BPP
+	select S5P64X0_SETUP_I2C1
+	select S5P64X0_SETUP_SDHCI_GPIO
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
-	select S5P64X0_SETUP_FB_24BPP
-	select S5P64X0_SETUP_I2C1
-	select S5P64X0_SETUP_SDHCI_GPIO
 	help
 	  Machine support for the Samsung SMDK6450
 
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 75a26ea..15170be 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -60,12 +60,6 @@
 	select S3C_DEV_I2C1
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_IDE
-	select SAMSUNG_DEV_KEYPAD
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
 	select S5PC100_SETUP_FB_24BPP
 	select S5PC100_SETUP_I2C1
 	select S5PC100_SETUP_IDE
@@ -74,6 +68,12 @@
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_IDE
+	select SAMSUNG_DEV_KEYPAD
+	select SAMSUNG_DEV_PWM
+	select SAMSUNG_DEV_TS
 	help
 	  Machine support for the Samsung SMDKC100
 
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 77185c3..92ad72f 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -11,11 +11,11 @@
 
 config CPU_S5PV210
 	bool
-	select SAMSUNG_DMADEV
 	select S5P_EXT_INT
 	select S5P_HRT
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
+	select SAMSUNG_DMADEV
 	help
 	  Enable S5PV210 CPU support
 
@@ -76,44 +76,44 @@
 	bool "Aquila"
 	select CPU_S5PV210
 	select S3C_DEV_FB
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
-	select S5P_DEV_ONENAND
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_SDHCI
 	select S5PV210_SETUP_USB_PHY
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_ONENAND
 	help
 	  Machine support for the Samsung Aquila target based on S5PC110 SoC
 
 config MACH_GONI
 	bool "GONI"
 	select CPU_S5PV210
-	select S5P_GPIO_INT
 	select S3C_DEV_FB
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C2
-	select S5P_DEV_MFC
 	select S3C_DEV_USB_HSOTG
-	select S5P_DEV_ONENAND
-	select SAMSUNG_DEV_KEYPAD
-	select S5P_DEV_TV
 	select S5PV210_SETUP_FB_24BPP
+	select S5PV210_SETUP_FIMC
 	select S5PV210_SETUP_I2C1
 	select S5PV210_SETUP_I2C2
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
-	select S5PV210_SETUP_FIMC
 	select S5PV210_SETUP_USB_PHY
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_MFC
+	select S5P_DEV_ONENAND
+	select S5P_DEV_TV
+	select S5P_GPIO_INT
+	select SAMSUNG_DEV_KEYPAD
 	help
 	  Machine support for Samsung GONI board
 	  S5PC110(MCP) is one of package option of S5PV210
@@ -125,14 +125,14 @@
 	select S3C_DEV_I2C2
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
+	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
+	select S5PV210_SETUP_IDE
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_MFC
 	select SAMSUNG_DEV_IDE
-	select S5PV210_SETUP_I2C1
-	select S5PV210_SETUP_I2C2
-	select S5PV210_SETUP_IDE
 	help
 	  Machine support for Samsung SMDKC110
 	  S5PC110(MCP) is one of package option of S5PV210
@@ -154,6 +154,13 @@
 	select S3C_DEV_RTC
 	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
+	select S5PV210_SETUP_FB_24BPP
+	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
+	select S5PV210_SETUP_IDE
+	select S5PV210_SETUP_KEYPAD
+	select S5PV210_SETUP_SDHCI
+	select S5PV210_SETUP_USB_PHY
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
@@ -165,20 +172,13 @@
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
-	select S5PV210_SETUP_FB_24BPP
-	select S5PV210_SETUP_I2C1
-	select S5PV210_SETUP_I2C2
-	select S5PV210_SETUP_IDE
-	select S5PV210_SETUP_KEYPAD
-	select S5PV210_SETUP_SDHCI
-	select S5PV210_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDKV210
 
 config MACH_TORBRECK
 	bool "Torbreck"
-	select CPU_S5PV210
 	select ARCH_SPARSEMEM_ENABLE
+	select CPU_S5PV210
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 42625e4..ca14dbd 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -49,15 +49,15 @@
 	bool "Sharp Zaurus SL5500"
 	# FIXME: select CPU_FREQ_SA11x0
 	select SHARP_LOCOMO
-	select SHARP_SCOOP
 	select SHARP_PARAM
+	select SHARP_SCOOP
 	help
 	  Say Y here to support the Sharp Zaurus SL5500 PDAs.
 
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
-	select HTC_EGPIO
 	select CPU_FREQ_SA1110
+	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3100 handheld computer.  Information about this machine and the
@@ -67,8 +67,8 @@
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
-	select HTC_EGPIO
 	select CPU_FREQ_SA1110
+	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3600 handheld computer.  Information about this machine and the
@@ -78,16 +78,16 @@
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
-	select SA1111
 	select CPU_FREQ_SA1100
+	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Laboratories
 	  BadgePAD 4.
 
 config SA1100_JORNADA720
 	bool "HP Jornada 720"
-	select SA1111
 	# FIXME: select CPU_FREQ_SA11x0
+	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Jornada 720
 	  handheld computer.  See 
@@ -95,8 +95,8 @@
 
 config SA1100_JORNADA720_SSP
 	bool "HP Jornada 720 Extended SSP driver"
-	select SA1100_SSP
 	depends on SA1100_JORNADA720
+	select SA1100_SSP
 	help
 	  Say Y here if you have a HP Jornada 7xx handheld computer and you
 	  want to access devices connected to the MCU. Those include the
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 4cacc2d..8ae100c 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -4,49 +4,49 @@
 
 config ARCH_SH7367
 	bool "SH-Mobile G3 (SH7367)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select CPU_V6
 	select SH_CLK_CPG
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config ARCH_SH7377
 	bool "SH-Mobile G4 (SH7377)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select CPU_V7
 	select SH_CLK_CPG
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config ARCH_SH7372
 	bool "SH-Mobile AP4 (SH7372)"
-	select CPU_V7
-	select SH_CLK_CPG
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_CPU_SUSPEND if PM || CPU_IDLE
+	select CPU_V7
+	select SH_CLK_CPG
 
 config ARCH_SH73A0
 	bool "SH-Mobile AG5 (R8A73A00)"
-	select CPU_V7
-	select SH_CLK_CPG
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
+	select CPU_V7
 	select I2C
+	select SH_CLK_CPG
 
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select CPU_V7
 	select SH_CLK_CPG
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
-	select ARM_GIC
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
-	select CPU_V7
-	select ARM_GIC
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_GIC
+	select CPU_V7
 
 comment "SH-Mobile Board Type"
 
@@ -65,9 +65,9 @@
 	bool "AP4EVB board"
 	depends on ARCH_SH7372
 	select ARCH_REQUIRE_GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select SH_LCD_MIPI_DSI
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 choice
 	prompt "AP4EVB LCD panel selection"
@@ -84,37 +84,37 @@
 
 config MACH_AG5EVM
 	bool "AG5EVM board"
-	select ARCH_REQUIRE_GPIOLIB
-	select SH_LCD_MIPI_DSI
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	depends on ARCH_SH73A0
+	select ARCH_REQUIRE_GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SH_LCD_MIPI_DSI
 
 config MACH_MACKEREL
 	bool "mackerel board"
 	depends on ARCH_SH7372
 	select ARCH_REQUIRE_GPIOLIB
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 
 config MACH_KOTA2
 	bool "KOTA2 board"
+	depends on ARCH_SH73A0
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	depends on ARCH_SH73A0
 
 config MACH_BONITO
 	bool "bonito board"
+	depends on ARCH_R8A7740
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	depends on ARCH_R8A7740
 
 config MACH_ARMADILLO800EVA
 	bool "Armadillo-800 EVA board"
 	depends on ARCH_R8A7740
 	select ARCH_REQUIRE_GPIOLIB
-	select USE_OF
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select SND_SOC_WM8978 if SND_SIMPLE_CARD
+	select USE_OF
 
 config MACH_MARZEN
 	bool "MARZEN board"
@@ -125,16 +125,16 @@
 config MACH_KZM9D
 	bool "KZM9D board"
 	depends on ARCH_EMEV2
-	select USE_OF
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select USE_OF
 
 config MACH_KZM9G
 	bool "KZM-A9-GT board"
 	depends on ARCH_SH73A0
 	select ARCH_REQUIRE_GPIOLIB
-	select USE_OF
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
+	select USE_OF
 
 comment "SH-Mobile System Configuration"
 
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 11680c5..9ff6f6e 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -4,42 +4,42 @@
 
 config ARCH_TEGRA_2x_SOC
 	bool "Enable support for Tegra20 family"
-	select CPU_V7
-	select ARM_GIC
 	select ARCH_REQUIRE_GPIOLIB
-	select PINCTRL
-	select PINCTRL_TEGRA20
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB
-	select USB_ULPI_VIEWPORT if USB_SUPPORT
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_742230
 	select ARM_ERRATA_751472
 	select ARM_ERRATA_754327
 	select ARM_ERRATA_764369 if SMP
+	select ARM_GIC
+	select CPU_FREQ_TABLE if CPU_FREQ
+	select CPU_V7
+	select PINCTRL
+	select PINCTRL_TEGRA20
 	select PL310_ERRATA_727915 if CACHE_L2X0
 	select PL310_ERRATA_769419 if CACHE_L2X0
-	select CPU_FREQ_TABLE if CPU_FREQ
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select USB_ULPI if USB
+	select USB_ULPI_VIEWPORT if USB_SUPPORT
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
 
 config ARCH_TEGRA_3x_SOC
 	bool "Enable support for Tegra30 family"
-	select CPU_V7
-	select ARM_GIC
 	select ARCH_REQUIRE_GPIOLIB
-	select PINCTRL
-	select PINCTRL_TEGRA30
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB
-	select USB_ULPI_VIEWPORT if USB_SUPPORT
 	select ARM_ERRATA_743622
 	select ARM_ERRATA_751472
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
-	select PL310_ERRATA_769419 if CACHE_L2X0
+	select ARM_GIC
 	select CPU_FREQ_TABLE if CPU_FREQ
+	select CPU_V7
+	select PINCTRL
+	select PINCTRL_TEGRA30
+	select PL310_ERRATA_769419 if CACHE_L2X0
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select USB_ULPI if USB
+	select USB_ULPI_VIEWPORT if USB_SUPPORT
 	help
 	  Support for NVIDIA Tegra T30 processor family, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index f7e12ed..1f59764 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -7,8 +7,8 @@
 config MACH_U300
 	bool "U300"
 	select PINCTRL
-	select PINCTRL_U300
 	select PINCTRL_COH901
+	select PINCTRL_U300
 
 comment "ST-Ericsson U300/U335 Feature Selections"
 
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 5848206..e8c3f0d 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -3,33 +3,33 @@
 config UX500_SOC_COMMON
 	bool
 	default y
-	select ARM_GIC
-	select HAS_MTU
-	select PL310_ERRATA_753970 if CACHE_PL310
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
+	select ARM_GIC
 	select CACHE_L2X0
+	select COMMON_CLK
+	select HAS_MTU
 	select PINCTRL
 	select PINCTRL_NOMADIK
-	select COMMON_CLK
+	select PL310_ERRATA_753970 if CACHE_PL310
 
 config UX500_SOC_DB8500
 	bool
+	select CPU_FREQ_TABLE if CPU_FREQ
 	select MFD_DB8500_PRCMU
+	select PINCTRL_DB8500
 	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
-	select CPU_FREQ_TABLE if CPU_FREQ
-	select PINCTRL_DB8500
 
 menu "Ux500 target platform (boards)"
 
 config MACH_MOP500
 	bool "U8500 Development platform, MOP500 versions"
-	select UX500_SOC_DB8500
 	select I2C
 	select I2C_NOMADIK
-	select SOC_BUS
 	select REGULATOR_FIXED_VOLTAGE
+	select SOC_BUS
+	select UX500_SOC_DB8500
 	help
 	  Include support for the MOP500 development platform.
 
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index c1f38f6..63d8e9f 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -3,9 +3,9 @@
 
 config ARCH_VERSATILE_PB
 	bool "Support Versatile Platform Baseboard for ARM926EJ-S"
+	default y
 	select CPU_ARM926T
 	select MIGHT_HAVE_PCI
-	default y
 	help
 	  Include support for the ARM(R) Versatile Platform Baseboard
 	  for the ARM926EJ-S.
@@ -19,8 +19,8 @@
 
 config MACH_VERSATILE_DT
 	bool "Support Versatile platform from device tree"
-	select USE_OF
 	select CPU_ARM926T
+	select USE_OF
 	help
 	  Include support for the ARM(R) Versatile/PB platform,
 	  using the device tree for discovery
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c9a4963..94186b6 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -10,8 +10,8 @@
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
+	select CPU_PABRT_LEGACY
 	help
 	  A 32-bit RISC microprocessor based on the ARM7 processor core
 	  which has no memory control unit and cache.
@@ -24,11 +24,11 @@
 	bool "Support ARM720T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WT if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WT if MMU
 	help
 	  A 32-bit RISC processor with 8kByte Cache, Write Buffer and
@@ -43,9 +43,9 @@
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V3	# although the core is v4t
 	select CPU_CP15_MPU
+	select CPU_PABRT_LEGACY
 	help
 	  A 32-bit RISC processor with 8KB cache or 4KB variants,
 	  write buffer and MPU(Protection Unit) built around
@@ -60,8 +60,8 @@
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
+	select CPU_PABRT_LEGACY
 	help
 	  A 32-bit RISC microprocessor based on the ARM9 processor core
 	  which has no memory control unit and cache.
@@ -74,11 +74,11 @@
 	bool "Support ARM920T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM920T is licensed to be produced by numerous vendors,
@@ -92,11 +92,11 @@
 	bool "Support ARM922T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM922T is a version of the ARM920T, but with smaller
@@ -111,11 +111,11 @@
  	bool "Support ARM925T processor" if ARCH_OMAP1
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
  	help
  	  The ARM925T is a mix between the ARM920T and ARM926T, but with
@@ -130,10 +130,10 @@
 	bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 	help
 	  This is a variant of the ARM920.  It has slightly different
@@ -148,11 +148,11 @@
 	bool
 	select CPU_32v4
 	select CPU_ABRT_EV4
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_CACHE_FA
+	select CPU_CACHE_VIVT
 	select CPU_COPY_FA if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_FA if MMU
 	help
 	  The FA526 is a version of the ARMv4 compatible processor with
@@ -167,9 +167,9 @@
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MPU
+	select CPU_PABRT_LEGACY
 	help
 	  ARM940T is a member of the ARM9TDMI family of general-
 	  purpose microprocessors with MPU and separate 4KB
@@ -185,9 +185,9 @@
 	depends on !MMU
 	select CPU_32v5
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MPU
+	select CPU_PABRT_LEGACY
 	help
 	  ARM946E-S is a member of the ARM9E-S family of high-
 	  performance, 32-bit system-on-chip processor solutions.
@@ -201,11 +201,11 @@
 	bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM1020 is the 32K cached version of the ARM10 processor,
@@ -217,25 +217,25 @@
 # ARM1020E - needs validating
 config CPU_ARM1020E
 	bool "Support ARM1020E processor" if ARCH_INTEGRATOR
+	depends on n
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
-	depends on n
 
 # ARM1022E
 config CPU_ARM1022
 	bool "Support ARM1022E processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM1022E is an implementation of the ARMv5TE architecture
@@ -250,10 +250,10 @@
 	bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
@@ -268,11 +268,11 @@
 	select CPU_32v3 if ARCH_RPC
 	select CPU_32v4 if !ARCH_RPC
 	select CPU_ABRT_EV4
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WB if MMU
 	help
 	  The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
@@ -288,10 +288,10 @@
 	bool
 	select CPU_32v4
 	select CPU_ABRT_EV4
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WB if MMU
 
 # XScale
@@ -299,9 +299,9 @@
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 
 # XScale Core Version 3
@@ -309,9 +309,9 @@
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 	select IO_36
 
@@ -320,21 +320,21 @@
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
-	select CPU_TLB_V4WBI if MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
+	select CPU_TLB_V4WBI if MMU
 
 # Feroceon
 config CPU_FEROCEON
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_FEROCEON if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_FEROCEON if MMU
 
 config CPU_FEROCEON_OLD_ID
@@ -349,20 +349,20 @@
 # Marvell PJ4
 config CPU_PJ4
 	bool
-	select CPU_V7
 	select ARM_THUMBEE
+	select CPU_V7
 
 # ARMv6
 config CPU_V6
 	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
 	select CPU_32v6
 	select CPU_ABRT_EV6
-	select CPU_PABRT_V6
 	select CPU_CACHE_V6
 	select CPU_CACHE_VIPT
+	select CPU_COPY_V6 if MMU
 	select CPU_CP15_MMU
 	select CPU_HAS_ASID if MMU
-	select CPU_COPY_V6 if MMU
+	select CPU_PABRT_V6
 	select CPU_TLB_V6 if MMU
 
 # ARMv6k
@@ -371,12 +371,12 @@
 	select CPU_32v6
 	select CPU_32v6K
 	select CPU_ABRT_EV6
-	select CPU_PABRT_V6
 	select CPU_CACHE_V6
 	select CPU_CACHE_VIPT
+	select CPU_COPY_V6 if MMU
 	select CPU_CP15_MMU
 	select CPU_HAS_ASID if MMU
-	select CPU_COPY_V6 if MMU
+	select CPU_PABRT_V6
 	select CPU_TLB_V6 if MMU
 
 # ARMv7
@@ -385,44 +385,44 @@
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
-	select CPU_PABRT_V7
 	select CPU_CACHE_V7
 	select CPU_CACHE_VIPT
+	select CPU_COPY_V6 if MMU
 	select CPU_CP15_MMU
 	select CPU_HAS_ASID if MMU
-	select CPU_COPY_V6 if MMU
+	select CPU_PABRT_V7
 	select CPU_TLB_V7 if MMU
 
 # Figure out what processor architecture version we should be using.
 # This defines the compiler instruction set which depends on the machine type.
 config CPU_32v3
 	bool
-	select TLS_REG_EMUL if SMP || !MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select CPU_USE_DOMAINS if MMU
+	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v4
 	bool
-	select TLS_REG_EMUL if SMP || !MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select CPU_USE_DOMAINS if MMU
+	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v4T
 	bool
-	select TLS_REG_EMUL if SMP || !MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select CPU_USE_DOMAINS if MMU
+	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v5
 	bool
-	select TLS_REG_EMUL if SMP || !MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select CPU_USE_DOMAINS if MMU
+	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v6
 	bool
-	select TLS_REG_EMUL if !CPU_32v6K && !MMU
 	select CPU_USE_DOMAINS if CPU_V6 && MMU
+	select TLS_REG_EMUL if !CPU_32v6K && !MMU
 
 config CPU_32v6K
 	bool
@@ -644,8 +644,8 @@
 config SWP_EMULATE
 	bool "Emulate SWP/SWPB instructions"
 	depends on !CPU_USE_DOMAINS && CPU_V7
-	select HAVE_PROC_CPU if PROC_FS
 	default y if SMP
+	select HAVE_PROC_CPU if PROC_FS
 	help
 	  ARMv6 architecture deprecates use of the SWP/SWPB instructions.
 	  ARMv7 multiprocessing extensions introduce the ability to disable
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index baf9064..88e1e2e 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -10,16 +10,16 @@
 
 config ARCH_IMX_V4_V5
 	bool "i.MX1, i.MX21, i.MX25, i.MX27"
-	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
+	select AUTO_ZRELADDR if !ZBOOT_ROM
 	help
 	  This enables support for systems based on the Freescale i.MX ARMv4
 	  and ARMv5 SoCs
 
 config ARCH_IMX_V6_V7
 	bool "i.MX3, i.MX5, i.MX6"
-	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
+	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  This enables support for systems based on the Freescale i.MX3, i.MX5
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index 6b46cee..a35d984 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -3,8 +3,8 @@
 	default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53
 
 config IMX_HAVE_PLATFORM_FLEXCAN
-	select HAVE_CAN_FLEXCAN if CAN
 	bool
+	select HAVE_CAN_FLEXCAN if CAN
 
 config IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	bool
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index 4c48c8b..19f55ca 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -5,8 +5,8 @@
 config PLAT_NOMADIK
 	bool
 	depends on ARCH_NOMADIK || ARCH_U8500
-	select CLKSRC_MMIO
 	default y
+	select CLKSRC_MMIO
 	help
 	  Common platform code for Nomadik and other ST-Ericsson
 	  platforms.
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index c9d1c36..7cd56ed 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -14,10 +14,10 @@
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
-	select IRQ_DOMAIN
 	select HAVE_IDE
-	select NEED_MACH_MEMORY_H
+	select IRQ_DOMAIN
 	select NEED_MACH_IO_H if PCCARD
+	select NEED_MACH_MEMORY_H
 	help
 	  "Systems based on omap7xx, omap15xx or omap16xx"
 
@@ -25,10 +25,10 @@
 	bool "TI OMAP2/3/4"
 	select CLKDEV_LOOKUP
 	select GENERIC_IRQ_CHIP
-	select SPARSE_IRQ
 	select OMAP_DM_TIMER
-	select USE_OF
 	select PROC_DEVICETREE if PROC_FS
+	select SPARSE_IRQ
+	select USE_OF
 	help
 	  "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
 
@@ -43,8 +43,8 @@
 
 config OMAP_DEBUG_LEDS
 	def_bool y if NEW_LEDS
-	select LEDS_CLASS
 	depends on OMAP_DEBUG_DEVICES
+	select LEDS_CLASS
 
 config POWER_AVS_OMAP
 	bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 21bf6ad..eef3b6a 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -6,8 +6,8 @@
 	bool
 	depends on ARCH_S3C24XX
 	default y
-	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
+	select NO_IOPORT
 	select S3C_DEV_NAND
 	help
 	  Base platform code for any Samsung S3C24XX device
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 9c3b90c..59401e1 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -7,9 +7,9 @@
 config PLAT_SAMSUNG
 	bool
 	depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
-	select NO_IOPORT
-	select GENERIC_IRQ_CHIP
 	default y
+	select GENERIC_IRQ_CHIP
+	select NO_IOPORT
 	help
 	  Base platform code for all Samsung SoC based systems
 
@@ -17,16 +17,16 @@
 	bool
 	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
 	default y
-	select ARM_VIC if !ARCH_EXYNOS
+	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC if ARCH_EXYNOS
+	select ARM_VIC if !ARCH_EXYNOS
 	select GIC_NON_BANKED if ARCH_EXYNOS4
 	select NO_IOPORT
-	select ARCH_REQUIRE_GPIOLIB
+	select PLAT_SAMSUNG
 	select S3C_GPIO_TRACK
 	select S5P_GPIO_DRVSTR
-	select SAMSUNG_GPIOLIB_4BIT
-	select PLAT_SAMSUNG
 	select SAMSUNG_CLKSRC
+	select SAMSUNG_GPIOLIB_4BIT
 	select SAMSUNG_IRQ_VIC_TIMER
 	help
 	  Base platform code for Samsung's S5P series SoC.
@@ -423,10 +423,10 @@
 
 config SAMSUNG_DMADEV
 	bool
+	select ARM_AMBA
 	select DMADEVICES
 	select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
 					CPU_S5P6450 || CPU_S5P6440)
-	select ARM_AMBA
 	help
 	  Use DMA device engine for PL330 DMAC.
 
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index 4404f82..f8db7b2 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -12,10 +12,10 @@
 	bool "ST SPEAr13xx with Device Tree"
 	select ARM_GIC
 	select CPU_V7
-	select USE_OF
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
+	select USE_OF
 	help
 	  Supports for ARM's SPEAR13XX family
 
@@ -23,8 +23,8 @@
 	bool "ST SPEAr3xx with Device Tree"
 	select ARM_VIC
 	select CPU_ARM926T
-	select USE_OF
 	select PINCTRL
+	select USE_OF
 	help
 	  Supports for ARM's SPEAR3XX family