net: fix assignment of 0/1 to bool variables.
DaveM said:
Please, this kind of stuff rots forever and not using bool properly
drives me crazy.
Joe Perches <joe@perches.com> gave me the spatch script:
@@
bool b;
@@
-b = 0
+b = false
@@
bool b;
@@
-b = 1
+b = true
I merely installed coccinelle, read the documentation and took credit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 5e45604..af239685 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -890,7 +890,7 @@
else
ring->ops = &dma32_ops;
if (for_tx) {
- ring->tx = 1;
+ ring->tx = true;
ring->current_slot = -1;
} else {
if (ring->index == 0) {
@@ -1061,7 +1061,7 @@
static int b43_dma_set_mask(struct b43_wldev *dev, u64 mask)
{
u64 orig_mask = mask;
- bool fallback = 0;
+ bool fallback = false;
int err;
/* Try to set the DMA mask. If it fails, try falling back to a
@@ -1075,12 +1075,12 @@
}
if (mask == DMA_BIT_MASK(64)) {
mask = DMA_BIT_MASK(32);
- fallback = 1;
+ fallback = true;
continue;
}
if (mask == DMA_BIT_MASK(32)) {
mask = DMA_BIT_MASK(30);
- fallback = 1;
+ fallback = true;
continue;
}
b43err(dev->wl, "The machine/kernel does not support "
@@ -1307,7 +1307,7 @@
memset(meta, 0, sizeof(*meta));
meta->skb = skb;
- meta->is_last_fragment = 1;
+ meta->is_last_fragment = true;
priv_info->bouncebuffer = NULL;
meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
@@ -1466,7 +1466,7 @@
should_inject_overflow(ring)) {
/* This TX ring is full. */
ieee80211_stop_queue(dev->wl->hw, skb_get_queue_mapping(skb));
- ring->stopped = 1;
+ ring->stopped = true;
if (b43_debug(dev, B43_DBG_DMAVERBOSE)) {
b43dbg(dev->wl, "Stopped TX ring %d\n", ring->index);
}
@@ -1585,7 +1585,7 @@
if (ring->stopped) {
B43_WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME);
ieee80211_wake_queue(dev->wl->hw, ring->queue_prio);
- ring->stopped = 0;
+ ring->stopped = false;
if (b43_debug(dev, B43_DBG_DMAVERBOSE)) {
b43dbg(dev->wl, "Woke up TX ring %d\n", ring->index);
}
diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index a38c1c6..d79ab2a 100644
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -74,7 +74,7 @@
if (radio_enabled)
turn_on = atomic_read(&led->state) != LED_OFF;
else
- turn_on = 0;
+ turn_on = false;
if (turn_on == led->hw_state)
return;
led->hw_state = turn_on;
@@ -225,11 +225,11 @@
if (sprom[led_index] == 0xFF) {
/* There is no LED information in the SPROM
* for this LED. Hardcode it here. */
- *activelow = 0;
+ *activelow = false;
switch (led_index) {
case 0:
*behaviour = B43_LED_ACTIVITY;
- *activelow = 1;
+ *activelow = true;
if (dev->dev->board_vendor == PCI_VENDOR_ID_COMPAQ)
*behaviour = B43_LED_RADIO_ALL;
break;
@@ -267,11 +267,11 @@
if (led->wl) {
if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev)) {
b43_led_turn_on(dev, led->index, led->activelow);
- led->hw_state = 1;
+ led->hw_state = true;
atomic_set(&led->state, 1);
} else {
b43_led_turn_off(dev, led->index, led->activelow);
- led->hw_state = 0;
+ led->hw_state = false;
atomic_set(&led->state, 0);
}
}
@@ -280,19 +280,19 @@
led = &dev->wl->leds.led_tx;
if (led->wl) {
b43_led_turn_off(dev, led->index, led->activelow);
- led->hw_state = 0;
+ led->hw_state = false;
atomic_set(&led->state, 0);
}
led = &dev->wl->leds.led_rx;
if (led->wl) {
b43_led_turn_off(dev, led->index, led->activelow);
- led->hw_state = 0;
+ led->hw_state = false;
atomic_set(&led->state, 0);
}
led = &dev->wl->leds.led_assoc;
if (led->wl) {
b43_led_turn_off(dev, led->index, led->activelow);
- led->hw_state = 0;
+ led->hw_state = false;
atomic_set(&led->state, 0);
}
diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c
index 4c82d58..916123a 100644
--- a/drivers/net/wireless/b43/lo.c
+++ b/drivers/net/wireless/b43/lo.c
@@ -826,7 +826,7 @@
const struct b43_rfatt *rfatt;
const struct b43_bbatt *bbatt;
u64 power_vector;
- bool table_changed = 0;
+ bool table_changed = false;
BUILD_BUG_ON(B43_DC_LT_SIZE != 32);
B43_WARN_ON(lo->rfatt_list.len * lo->bbatt_list.len > 64);
@@ -876,7 +876,7 @@
lo->dc_lt[idx] = (lo->dc_lt[idx] & 0xFF00)
| (val & 0x00FF);
}
- table_changed = 1;
+ table_changed = true;
}
if (table_changed) {
/* The table changed in memory. Update the hardware table. */
@@ -938,7 +938,7 @@
unsigned long now;
unsigned long expire;
struct b43_lo_calib *cal, *tmp;
- bool current_item_expired = 0;
+ bool current_item_expired = false;
bool hwpctl;
if (!lo)
@@ -968,7 +968,7 @@
if (b43_compare_bbatt(&cal->bbatt, &gphy->bbatt) &&
b43_compare_rfatt(&cal->rfatt, &gphy->rfatt)) {
B43_WARN_ON(current_item_expired);
- current_item_expired = 1;
+ current_item_expired = true;
}
if (b43_debug(dev, B43_DBG_LO)) {
b43dbg(dev->wl, "LO: Item BB(%u), RF(%u,%u), "
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 5634d9a..c74f36f 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1122,17 +1122,17 @@
B43_WARN_ON((ps_flags & B43_PS_AWAKE) && (ps_flags & B43_PS_ASLEEP));
if (ps_flags & B43_PS_ENABLED) {
- hwps = 1;
+ hwps = true;
} else if (ps_flags & B43_PS_DISABLED) {
- hwps = 0;
+ hwps = false;
} else {
//TODO: If powersave is not off and FIXME is not set and we are not in adhoc
// and thus is not an AP and we are associated, set bit 25
}
if (ps_flags & B43_PS_AWAKE) {
- awake = 1;
+ awake = true;
} else if (ps_flags & B43_PS_ASLEEP) {
- awake = 0;
+ awake = false;
} else {
//TODO: If the device is awake or this is an AP, or we are scanning, or FIXME,
// or we are associated, or FIXME, or the latest PS-Poll packet sent was
@@ -1140,8 +1140,8 @@
}
/* FIXME: For now we force awake-on and hwps-off */
- hwps = 0;
- awake = 1;
+ hwps = false;
+ awake = true;
macctl = b43_read32(dev, B43_MMIO_MACCTL);
if (hwps)
@@ -1339,7 +1339,7 @@
return;
if (dev->noisecalc.calculation_running)
return;
- dev->noisecalc.calculation_running = 1;
+ dev->noisecalc.calculation_running = true;
dev->noisecalc.nr_samples = 0;
b43_generate_noise_sample(dev);
@@ -1408,7 +1408,7 @@
average -= 48;
dev->stats.link_noise = average;
- dev->noisecalc.calculation_running = 0;
+ dev->noisecalc.calculation_running = false;
return;
}
generate_new:
@@ -1424,7 +1424,7 @@
b43_power_saving_ctl_bits(dev, 0);
}
if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC))
- dev->dfq_valid = 1;
+ dev->dfq_valid = true;
}
static void handle_irq_atim_end(struct b43_wldev *dev)
@@ -1433,7 +1433,7 @@
b43_write32(dev, B43_MMIO_MACCMD,
b43_read32(dev, B43_MMIO_MACCMD)
| B43_MACCMD_DFQ_VALID);
- dev->dfq_valid = 0;
+ dev->dfq_valid = false;
}
}
@@ -1539,7 +1539,7 @@
unsigned int i, len, variable_len;
const struct ieee80211_mgmt *bcn;
const u8 *ie;
- bool tim_found = 0;
+ bool tim_found = false;
unsigned int rate;
u16 ctl;
int antenna;
@@ -1588,7 +1588,7 @@
/* A valid TIM is at least 4 bytes long. */
if (ie_len < 4)
break;
- tim_found = 1;
+ tim_found = true;
tim_position = sizeof(struct b43_plcp_hdr6);
tim_position += offsetof(struct ieee80211_mgmt, u.beacon.variable);
@@ -1625,7 +1625,7 @@
if (wl->beacon0_uploaded)
return;
b43_write_beacon_template(dev, 0x68, 0x18);
- wl->beacon0_uploaded = 1;
+ wl->beacon0_uploaded = true;
}
static void b43_upload_beacon1(struct b43_wldev *dev)
@@ -1635,7 +1635,7 @@
if (wl->beacon1_uploaded)
return;
b43_write_beacon_template(dev, 0x468, 0x1A);
- wl->beacon1_uploaded = 1;
+ wl->beacon1_uploaded = true;
}
static void handle_irq_beacon(struct b43_wldev *dev)
@@ -1667,7 +1667,7 @@
if (unlikely(wl->beacon_templates_virgin)) {
/* We never uploaded a beacon before.
* Upload both templates now, but only mark one valid. */
- wl->beacon_templates_virgin = 0;
+ wl->beacon_templates_virgin = false;
b43_upload_beacon0(dev);
b43_upload_beacon1(dev);
cmd = b43_read32(dev, B43_MMIO_MACCMD);
@@ -1755,8 +1755,8 @@
if (wl->current_beacon)
dev_kfree_skb_any(wl->current_beacon);
wl->current_beacon = beacon;
- wl->beacon0_uploaded = 0;
- wl->beacon1_uploaded = 0;
+ wl->beacon0_uploaded = false;
+ wl->beacon1_uploaded = false;
ieee80211_queue_work(wl->hw, &wl->beacon_update_trigger);
}
@@ -1913,7 +1913,7 @@
b43err(dev->wl, "This device does not support DMA "
"on your system. It will now be switched to PIO.\n");
/* Fall back to PIO transfers if we get fatal DMA errors! */
- dev->use_pio = 1;
+ dev->use_pio = true;
b43_controller_restart(dev, "DMA error");
return;
}
@@ -2240,12 +2240,12 @@
filename = NULL;
else
goto err_no_pcm;
- fw->pcm_request_failed = 0;
+ fw->pcm_request_failed = false;
err = b43_do_request_fw(ctx, filename, &fw->pcm);
if (err == -ENOENT) {
/* We did not find a PCM file? Not fatal, but
* core rev <= 10 must do without hwcrypto then. */
- fw->pcm_request_failed = 1;
+ fw->pcm_request_failed = true;
} else if (err)
goto err_load;
@@ -2535,7 +2535,7 @@
dev->wl->hw->queues = dev->wl->mac80211_initially_registered_queues;
dev->qos_enabled = !!modparam_qos;
/* Default to firmware/hardware crypto acceleration. */
- dev->hwcrypto_enabled = 1;
+ dev->hwcrypto_enabled = true;
if (dev->fw.opensource) {
u16 fwcapa;
@@ -2549,7 +2549,7 @@
if (!(fwcapa & B43_FWCAPA_HWCRYPTO) || dev->fw.pcm_request_failed) {
b43info(dev->wl, "Hardware crypto acceleration not supported by firmware\n");
/* Disable hardware crypto and fall back to software crypto. */
- dev->hwcrypto_enabled = 0;
+ dev->hwcrypto_enabled = false;
}
if (!(fwcapa & B43_FWCAPA_QOS)) {
b43info(dev->wl, "QoS not supported by firmware\n");
@@ -2557,7 +2557,7 @@
* ieee80211_unregister to make sure the networking core can
* properly free possible resources. */
dev->wl->hw->queues = 1;
- dev->qos_enabled = 0;
+ dev->qos_enabled = false;
}
} else {
b43info(dev->wl, "Loading firmware version %u.%u "
@@ -3361,10 +3361,10 @@
wl->rng.name = wl->rng_name;
wl->rng.data_read = b43_rng_read;
wl->rng.priv = (unsigned long)wl;
- wl->rng_initialized = 1;
+ wl->rng_initialized = true;
err = hwrng_register(&wl->rng);
if (err) {
- wl->rng_initialized = 0;
+ wl->rng_initialized = false;
b43err(wl, "Failed to register the random "
"number generator (%d)\n", err);
}
@@ -3702,13 +3702,13 @@
case IEEE80211_BAND_5GHZ:
if (d->phy.supports_5ghz) {
up_dev = d;
- gmode = 0;
+ gmode = false;
}
break;
case IEEE80211_BAND_2GHZ:
if (d->phy.supports_2ghz) {
up_dev = d;
- gmode = 1;
+ gmode = true;
}
break;
default:
@@ -4425,18 +4425,18 @@
atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
#if B43_DEBUG
- phy->phy_locked = 0;
- phy->radio_locked = 0;
+ phy->phy_locked = false;
+ phy->radio_locked = false;
#endif
}
static void setup_struct_wldev_for_init(struct b43_wldev *dev)
{
- dev->dfq_valid = 0;
+ dev->dfq_valid = false;
/* Assume the radio is enabled. If it's not enabled, the state will
* immediately get fixed on the first periodic work run. */
- dev->radio_hw_enable = 1;
+ dev->radio_hw_enable = true;
/* Stats */
memset(&dev->stats, 0, sizeof(dev->stats));
@@ -4670,16 +4670,16 @@
if (b43_bus_host_is_pcmcia(dev->dev) ||
b43_bus_host_is_sdio(dev->dev)) {
- dev->__using_pio_transfers = 1;
+ dev->__using_pio_transfers = true;
err = b43_pio_init(dev);
} else if (dev->use_pio) {
b43warn(dev->wl, "Forced PIO by use_pio module parameter. "
"This should not be needed and will result in lower "
"performance.\n");
- dev->__using_pio_transfers = 1;
+ dev->__using_pio_transfers = true;
err = b43_pio_init(dev);
} else {
- dev->__using_pio_transfers = 0;
+ dev->__using_pio_transfers = false;
err = b43_dma_init(dev);
}
if (err)
@@ -4733,7 +4733,7 @@
b43dbg(wl, "Adding Interface type %d\n", vif->type);
dev = wl->current_dev;
- wl->operating = 1;
+ wl->operating = true;
wl->vif = vif;
wl->if_type = vif->type;
memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
@@ -4767,7 +4767,7 @@
B43_WARN_ON(wl->vif != vif);
wl->vif = NULL;
- wl->operating = 0;
+ wl->operating = false;
b43_adjust_opmode(dev);
memset(wl->mac_addr, 0, ETH_ALEN);
@@ -4789,12 +4789,12 @@
memset(wl->bssid, 0, ETH_ALEN);
memset(wl->mac_addr, 0, ETH_ALEN);
wl->filter_flags = 0;
- wl->radiotap_enabled = 0;
+ wl->radiotap_enabled = false;
b43_qos_clear(wl);
- wl->beacon0_uploaded = 0;
- wl->beacon1_uploaded = 0;
- wl->beacon_templates_virgin = 1;
- wl->radio_enabled = 1;
+ wl->beacon0_uploaded = false;
+ wl->beacon1_uploaded = false;
+ wl->beacon_templates_virgin = true;
+ wl->radio_enabled = true;
mutex_lock(&wl->mutex);
@@ -4840,7 +4840,7 @@
goto out_unlock;
}
b43_wireless_core_exit(dev);
- wl->radio_enabled = 0;
+ wl->radio_enabled = false;
out_unlock:
mutex_unlock(&wl->mutex);
@@ -5028,7 +5028,7 @@
struct pci_dev *pdev = NULL;
int err;
u32 tmp;
- bool have_2ghz_phy = 0, have_5ghz_phy = 0;
+ bool have_2ghz_phy = false, have_5ghz_phy = false;
/* Do NOT do any device initialization here.
* Do it in wireless_core_init() instead.
@@ -5071,7 +5071,7 @@
}
dev->phy.gmode = have_2ghz_phy;
- dev->phy.radio_on = 1;
+ dev->phy.radio_on = true;
b43_wireless_core_reset(dev, dev->phy.gmode);
err = b43_phy_versioning(dev);
@@ -5082,11 +5082,11 @@
(pdev->device != 0x4312 &&
pdev->device != 0x4319 && pdev->device != 0x4324)) {
/* No multiband support. */
- have_2ghz_phy = 0;
- have_5ghz_phy = 0;
+ have_2ghz_phy = false;
+ have_5ghz_phy = false;
switch (dev->phy.type) {
case B43_PHYTYPE_A:
- have_5ghz_phy = 1;
+ have_5ghz_phy = true;
break;
case B43_PHYTYPE_LP: //FIXME not always!
#if 0 //FIXME enabling 5GHz causes a NULL pointer dereference
@@ -5096,7 +5096,7 @@
case B43_PHYTYPE_N:
case B43_PHYTYPE_HT:
case B43_PHYTYPE_LCN:
- have_2ghz_phy = 1;
+ have_2ghz_phy = true;
break;
default:
B43_WARN_ON(1);
@@ -5112,8 +5112,8 @@
/* FIXME: For now we disable the A-PHY on multi-PHY devices. */
if (dev->phy.type != B43_PHYTYPE_N &&
dev->phy.type != B43_PHYTYPE_LP) {
- have_2ghz_phy = 1;
- have_5ghz_phy = 0;
+ have_2ghz_phy = true;
+ have_5ghz_phy = false;
}
}
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index 3ea44bb..3f8883b 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -145,7 +145,7 @@
#if B43_DEBUG
B43_WARN_ON(dev->phy.radio_locked);
- dev->phy.radio_locked = 1;
+ dev->phy.radio_locked = true;
#endif
macctl = b43_read32(dev, B43_MMIO_MACCTL);
@@ -163,7 +163,7 @@
#if B43_DEBUG
B43_WARN_ON(!dev->phy.radio_locked);
- dev->phy.radio_locked = 0;
+ dev->phy.radio_locked = false;
#endif
/* Commit any write */
@@ -178,7 +178,7 @@
{
#if B43_DEBUG
B43_WARN_ON(dev->phy.phy_locked);
- dev->phy.phy_locked = 1;
+ dev->phy.phy_locked = true;
#endif
B43_WARN_ON(dev->dev->core_rev < 3);
@@ -190,7 +190,7 @@
{
#if B43_DEBUG
B43_WARN_ON(!dev->phy.phy_locked);
- dev->phy.phy_locked = 0;
+ dev->phy.phy_locked = false;
#endif
B43_WARN_ON(dev->dev->core_rev < 3);
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 8e157bc..12f467b 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -897,7 +897,7 @@
if (b43_phy_read(dev, 0x0033) & 0x0800)
break;
- gphy->aci_enable = 1;
+ gphy->aci_enable = true;
phy_stacksave(B43_PHY_RADIO_BITFIELD);
phy_stacksave(B43_PHY_G_CRS);
@@ -1038,7 +1038,7 @@
if (!(b43_phy_read(dev, 0x0033) & 0x0800))
break;
- gphy->aci_enable = 0;
+ gphy->aci_enable = false;
phy_stackrestore(B43_PHY_RADIO_BITFIELD);
phy_stackrestore(B43_PHY_G_CRS);
@@ -1956,10 +1956,10 @@
bbatt.att = 11;
if (phy->radio_rev == 8) {
rfatt.att = 15;
- rfatt.with_padmix = 1;
+ rfatt.with_padmix = true;
} else {
rfatt.att = 9;
- rfatt.with_padmix = 0;
+ rfatt.with_padmix = false;
}
b43_set_txpower_g(dev, &bbatt, &rfatt, 0);
}
@@ -2137,7 +2137,7 @@
struct b43_bus_dev *bdev = dev->dev;
struct b43_phy *phy = &dev->phy;
- rf->with_padmix = 0;
+ rf->with_padmix = false;
if (dev->dev->board_vendor == SSB_BOARDVENDOR_BCM &&
dev->dev->board_type == SSB_BOARD_BCM4309G) {
@@ -2221,7 +2221,7 @@
return;
case 8:
rf->att = 0xA;
- rf->with_padmix = 1;
+ rf->with_padmix = true;
return;
case 9:
default:
@@ -2389,7 +2389,7 @@
B43_WARN_ON((dev->dev->chip_id == 0x4301) &&
(phy->radio_ver != 0x2050)); /* Not supported anymore */
- gphy->dyn_tssi_tbl = 0;
+ gphy->dyn_tssi_tbl = false;
if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
pab0 != -1 && pab1 != -1 && pab2 != -1) {
@@ -2404,7 +2404,7 @@
pab1, pab2);
if (!gphy->tssi2dbm)
return -ENOMEM;
- gphy->dyn_tssi_tbl = 1;
+ gphy->dyn_tssi_tbl = true;
} else {
/* pabX values not set in SPROM. */
gphy->tgt_idle_tssi = 52;
@@ -2504,7 +2504,7 @@
if (gphy->dyn_tssi_tbl)
kfree(gphy->tssi2dbm);
- gphy->dyn_tssi_tbl = 0;
+ gphy->dyn_tssi_tbl = false;
gphy->tssi2dbm = NULL;
kfree(gphy);
@@ -2531,10 +2531,10 @@
if (phy->rev == 1) {
/* Workaround: Temporarly disable gmode through the early init
* phase, as the gmode stuff is not needed for phy rev 1 */
- phy->gmode = 0;
+ phy->gmode = false;
b43_wireless_core_reset(dev, 0);
b43_phy_initg(dev);
- phy->gmode = 1;
+ phy->gmode = true;
b43_wireless_core_reset(dev, 1);
}
@@ -2613,7 +2613,7 @@
gphy->radio_off_context.rfover);
b43_phy_write(dev, B43_PHY_RFOVERVAL,
gphy->radio_off_context.rfoverval);
- gphy->radio_off_context.valid = 0;
+ gphy->radio_off_context.valid = false;
}
channel = phy->channel;
b43_gphy_channel_switch(dev, 6, 1);
@@ -2626,7 +2626,7 @@
rfoverval = b43_phy_read(dev, B43_PHY_RFOVERVAL);
gphy->radio_off_context.rfover = rfover;
gphy->radio_off_context.rfoverval = rfoverval;
- gphy->radio_off_context.valid = 1;
+ gphy->radio_off_context.valid = true;
b43_phy_write(dev, B43_PHY_RFOVER, rfover | 0x008C);
b43_phy_write(dev, B43_PHY_RFOVERVAL, rfoverval & 0xFF73);
}
@@ -2711,10 +2711,10 @@
if ((phy->rev == 0) || (!phy->gmode))
return -ENODEV;
- gphy->aci_wlan_automatic = 0;
+ gphy->aci_wlan_automatic = false;
switch (mode) {
case B43_INTERFMODE_AUTOWLAN:
- gphy->aci_wlan_automatic = 1;
+ gphy->aci_wlan_automatic = true;
if (gphy->aci_enable)
mode = B43_INTERFMODE_MANUALWLAN;
else
@@ -2735,8 +2735,8 @@
b43_radio_interference_mitigation_disable(dev, currentmode);
if (mode == B43_INTERFMODE_NONE) {
- gphy->aci_enable = 0;
- gphy->aci_hw_rssi = 0;
+ gphy->aci_enable = false;
+ gphy->aci_hw_rssi = false;
} else
b43_radio_interference_mitigation_enable(dev, mode);
gphy->interfmode = mode;
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index f93d66b..3ae2856 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -736,9 +736,9 @@
struct b43_phy_lp *lpphy = dev->phy.lp;
if (user)
- lpphy->crs_usr_disable = 1;
+ lpphy->crs_usr_disable = true;
else
- lpphy->crs_sys_disable = 1;
+ lpphy->crs_sys_disable = true;
b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFF1F, 0x80);
}
@@ -747,9 +747,9 @@
struct b43_phy_lp *lpphy = dev->phy.lp;
if (user)
- lpphy->crs_usr_disable = 0;
+ lpphy->crs_usr_disable = false;
else
- lpphy->crs_sys_disable = 0;
+ lpphy->crs_sys_disable = false;
if (!lpphy->crs_usr_disable && !lpphy->crs_sys_disable) {
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index c8fa2cd..f1a7e58 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -3375,7 +3375,7 @@
if (dev->phy.rev >= 4) {
avoid = nphy->hang_avoid;
- nphy->hang_avoid = 0;
+ nphy->hang_avoid = false;
}
b43_ntab_read_bulk(dev, B43_NTAB16(7, 0x110), 2, save);
@@ -3485,7 +3485,7 @@
if (phy6or5x && updated[core] == 0) {
b43_nphy_update_tx_cal_ladder(dev, core);
- updated[core] = 1;
+ updated[core] = true;
}
tmp = (params[core].ncorr[type] << 8) | 0x66;
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index fcff923..d07b412 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -539,7 +539,7 @@
/* Not enough memory on the queue. */
err = -EBUSY;
ieee80211_stop_queue(dev->wl->hw, skb_get_queue_mapping(skb));
- q->stopped = 1;
+ q->stopped = true;
goto out;
}
@@ -566,7 +566,7 @@
(q->free_packet_slots == 0)) {
/* The queue is full. */
ieee80211_stop_queue(dev->wl->hw, skb_get_queue_mapping(skb));
- q->stopped = 1;
+ q->stopped = true;
}
out:
@@ -601,7 +601,7 @@
if (q->stopped) {
ieee80211_wake_queue(dev->wl->hw, q->queue_prio);
- q->stopped = 0;
+ q->stopped = false;
}
}
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 5f77cbe..2c53678 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -874,7 +874,7 @@
struct ieee80211_tx_info *report,
const struct b43_txstatus *status)
{
- bool frame_success = 1;
+ bool frame_success = true;
int retry_limit;
/* preserve the confiured retry limit before clearing the status
@@ -890,7 +890,7 @@
/* The frame was not ACKed... */
if (!(report->flags & IEEE80211_TX_CTL_NO_ACK)) {
/* ...but we expected an ACK. */
- frame_success = 0;
+ frame_success = false;
}
}
if (status->frame_count == 0) {