[POWERPC] 4xx: Base support for 440SPe "Katmai" eval board
This adds base support for the Katmai board, including PCI-X and
PCI-Express (but no RTC, nvram, etc... yet).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
new file mode 100644
index 0000000..cc2810e0
--- /dev/null
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -0,0 +1,392 @@
+/*
+ * Device Tree Source for AMCC Katmai eval board
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,katmai";
+ compatible = "amcc,katmai";
+ dcr-parent = <&/cpus/PowerPC,440SPe@0>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,440SPe@0 {
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ timebase-frequency = <0>; /* Filled in by zImage */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <20000>;
+ d-cache-size = <20000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0>; /* Filled in by zImage */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0d0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <1e 4 1f 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0e0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <a 4 b 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0f0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <10 4 11 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-440spe";
+ dcr-reg = <00e 002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-440spe";
+ dcr-reg = <00c 002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
+ dcr-reg = <010 2>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
+ dcr-reg = <180 62>;
+ num-tx-chans = <2>;
+ num-rx-chans = <1>;
+ interrupt-parent = <&MAL0>;
+ interrupts = <0 1 2 3 4>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*TXEOB*/ 0 &UIC1 6 4
+ /*RXEOB*/ 1 &UIC1 7 4
+ /*SERR*/ 2 &UIC1 1 4
+ /*TXDE*/ 3 &UIC1 2 4
+ /*RXDE*/ 4 &UIC1 3 4>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <00000000 4 e0000000 20000000>;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ interrupts = <5 1>;
+ interrupt-parent = <&UIC1>;
+ };
+
+ UART0: serial@10000200 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <10000200 8>;
+ virtual-reg = <a0000200>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ current-speed = <1c200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0 4>;
+ };
+
+ UART1: serial@10000300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <10000300 8>;
+ virtual-reg = <a0000300>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
+
+
+ UART2: serial@10000600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <10000600 8>;
+ virtual-reg = <a0000600>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <5 4>;
+ };
+
+ IIC0: i2c@10000400 {
+ device_type = "i2c";
+ compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+ reg = <10000400 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+
+ IIC1: i2c@10000500 {
+ device_type = "i2c";
+ compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+ reg = <10000500 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <3 4>;
+ };
+
+ EMAC0: ethernet@10000800 {
+ linux,network-index = <0>;
+ device_type = "network";
+ compatible = "ibm,emac-440spe", "ibm,emac4";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1c 4 1d 4>;
+ reg = <10000800 70>;
+ local-mac-address = [000000000000];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "gmii";
+ phy-map = <00000000>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+ };
+
+ PCIX0: pci@c0ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <c 0ec00000 8 /* Config space access */
+ 0 0 0 /* no IACK cycles */
+ c 0ed00000 4 /* Special cycles */
+ c 0ec80000 100 /* Internal registers */
+ c 0ec80100 fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
+ 01000000 0 00000000 0000000c 08000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0 f>;
+
+ /*
+ * On Katmai, the following PCI-X interrupts signals
+ * have to be enabled via jumpers (only INTA is
+ * enabled per default):
+ *
+ * INTB: J3: 1-2
+ * INTC: J2: 1-2
+ * INTD: J1: 1-2
+ */
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 1 */
+ 0800 0 0 1 &UIC1 14 8
+ 0800 0 0 2 &UIC1 13 8
+ 0800 0 0 3 &UIC1 12 8
+ 0800 0 0 4 &UIC1 11 8
+ >;
+ };
+
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-440speB", "ibm,plb-pciex";
+ primary;
+ port = <0>; /* port number */
+ reg = <d 00000000 20000000 /* Config space access */
+ c 10000000 00001000>; /* Registers */
+ dcr-reg = <100 020>;
+ sdr-base = <300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
+ 01000000 0 00000000 0000000f 80000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 10 to 0x1f */
+ bus-range = <10 1f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 0 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 1 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 2 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 3 4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-440speB", "ibm,plb-pciex";
+ primary;
+ port = <1>; /* port number */
+ reg = <d 20000000 20000000 /* Config space access */
+ c 10001000 00001000>; /* Registers */
+ dcr-reg = <120 020>;
+ sdr-base = <340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
+ 01000000 0 00000000 0000000f 80010000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 10 to 0x1f */
+ bus-range = <20 2f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 4 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 5 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 6 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 7 4 /* swizzled int D */>;
+ };
+
+ PCIE2: pciex@d40000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-440speB", "ibm,plb-pciex";
+ primary;
+ port = <2>; /* port number */
+ reg = <d 40000000 20000000 /* Config space access */
+ c 10002000 00001000>; /* Registers */
+ dcr-reg = <140 020>;
+ sdr-base = <370>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000f 00000000 0 80000000
+ 01000000 0 00000000 0000000f 80020000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 10 to 0x1f */
+ bus-range = <30 3f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 8 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 9 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 a 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 b 4 /* swizzled int D */>;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@10000200";
+ };
+};