[PATCH] mips: nuke trailing whitespace
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c
index 533721e..4e5a6e1 100644
--- a/arch/mips/au1000/common/pci.c
+++ b/arch/mips/au1000/common/pci.c
@@ -40,14 +40,14 @@
/* TBD */
static struct resource pci_io_resource = {
- "pci IO space",
+ "pci IO space",
(u32)PCI_IO_START,
(u32)PCI_IO_END,
IORESOURCE_IO
};
static struct resource pci_mem_resource = {
- "pci memory space",
+ "pci memory space",
(u32)PCI_MEM_START,
(u32)PCI_MEM_END,
IORESOURCE_MEM
@@ -68,7 +68,7 @@
static int __init au1x_pci_setup(void)
{
#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
- virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START,
+ virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START,
Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1);
if (!virt_io_addr) {
@@ -77,7 +77,7 @@
}
#ifdef CONFIG_DMA_NONCOHERENT
- /*
+ /*
* Set the NC bit in controller for Au1500 pre-AC silicon
*/
u32 prid = read_c0_prid();
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index dbc8b1b..eff89e1 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -97,7 +97,7 @@
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
-#endif
+#endif
#ifdef CONFIG_FB_AU1100
if ((argptr = strstr(argptr, "video=")) == NULL) {
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index fe418f1..57675b4 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -281,7 +281,7 @@
cpu_speed = count * 2;
}
#else
- cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
+ cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
AU1000_SRC_CLK;
count = cpu_speed / 2;
#endif
@@ -356,7 +356,7 @@
: "hi", "lo", GCC_REG_ACCUM);
/*
- * Due to possible jiffies inconsistencies, we need to check
+ * Due to possible jiffies inconsistencies, we need to check
* the result so that we'll get a timer that is monotonic.
*/
if (res >= USECS_PER_JIFFY)
@@ -375,8 +375,8 @@
au_sync();
offset = pc0 - last_pc0;
if (offset > 2*MATCH20_INC) {
- printk("huge offset %x, last_pc0 %x last_match20 %x pc0 %x\n",
- (unsigned)offset, (unsigned)last_pc0,
+ printk("huge offset %x, last_pc0 %x last_match20 %x pc0 %x\n",
+ (unsigned)offset, (unsigned)last_pc0,
(unsigned)last_match20, (unsigned)pc0);
}
offset = (unsigned long)((offset * 305) / 10);
@@ -394,11 +394,11 @@
r4k_offset = cal_r4koff();
printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
- //est_freq = 2*r4k_offset*HZ;
- est_freq = r4k_offset*HZ;
+ //est_freq = 2*r4k_offset*HZ;
+ est_freq = r4k_offset*HZ;
est_freq += 5000; /* round */
est_freq -= est_freq%10000;
- printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
+ printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
(est_freq%1000000)*100/1000000);
set_au1x00_speed(est_freq);
set_au1x00_lcd_clock(); // program the LCD clock