[POWERPC] Consolidate feature fixup code
There are currently two versions of the functions for applying the
feature fixups, one for CPU features and one for firmware features. In
addition, they are both in assembly and with separate implementations
for 32 and 64 bits. identify_cpu() is also implemented in assembly and
separately for 32 and 64 bits.
This patch replaces them with a pair of C functions. The call sites are
slightly moved on ppc64 as well to be called from C instead of from
assembly, though it's a very small change, and thus shouldn't cause any
problem.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
index 5f66840..d319f9b 100644
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -110,80 +110,6 @@
blr
/*
- * identify_cpu,
- * called with r3 = data offset and r4 = CPU number
- * doesn't change r3
- */
-_GLOBAL(identify_cpu)
- addis r8,r3,cpu_specs@ha
- addi r8,r8,cpu_specs@l
- mfpvr r7
-1:
- lwz r5,CPU_SPEC_PVR_MASK(r8)
- and r5,r5,r7
- lwz r6,CPU_SPEC_PVR_VALUE(r8)
- cmplw 0,r6,r5
- beq 1f
- addi r8,r8,CPU_SPEC_ENTRY_SIZE
- b 1b
-1:
- addis r6,r3,cur_cpu_spec@ha
- addi r6,r6,cur_cpu_spec@l
- sub r8,r8,r3
- stw r8,0(r6)
- blr
-
-/*
- * do_cpu_ftr_fixups - goes through the list of CPU feature fixups
- * and writes nop's over sections of code that don't apply for this cpu.
- * r3 = data offset (not changed)
- */
-_GLOBAL(do_cpu_ftr_fixups)
- /* Get CPU 0 features */
- addis r6,r3,cur_cpu_spec@ha
- addi r6,r6,cur_cpu_spec@l
- lwz r4,0(r6)
- add r4,r4,r3
- lwz r4,CPU_SPEC_FEATURES(r4)
-
- /* Get the fixup table */
- addis r6,r3,__start___ftr_fixup@ha
- addi r6,r6,__start___ftr_fixup@l
- addis r7,r3,__stop___ftr_fixup@ha
- addi r7,r7,__stop___ftr_fixup@l
-
- /* Do the fixup */
-1: cmplw 0,r6,r7
- bgelr
- addi r6,r6,16
- lwz r8,-16(r6) /* mask */
- and r8,r8,r4
- lwz r9,-12(r6) /* value */
- cmplw 0,r8,r9
- beq 1b
- lwz r8,-8(r6) /* section begin */
- lwz r9,-4(r6) /* section end */
- subf. r9,r8,r9
- beq 1b
- /* write nops over the section of code */
- /* todo: if large section, add a branch at the start of it */
- srwi r9,r9,2
- mtctr r9
- add r8,r8,r3
- lis r0,0x60000000@h /* nop */
-3: stw r0,0(r8)
- andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l
- beq 2f
- dcbst 0,r8 /* suboptimal, but simpler */
- sync
- icbi 0,r8
-2: addi r8,r8,4
- bdnz 3b
- sync /* additional sync needed on g4 */
- isync
- b 1b
-
-/*
* call_setup_cpu - call the setup_cpu function for this cpu
* r3 = data offset, r24 = cpu number
*
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 75fe138..41a640f 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -38,6 +38,7 @@
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/ocp.h>
+#include <asm/prom.h>
#define USES_PPC_SYS (defined(CONFIG_85xx) || defined(CONFIG_83xx) || \
defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
@@ -53,8 +54,6 @@
extern void platform_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, unsigned long r7);
-extern void identify_cpu(unsigned long offset, unsigned long cpu);
-extern void do_cpu_ftr_fixups(unsigned long offset);
extern void reloc_got2(unsigned long offset);
extern void ppc6xx_idle(void);
@@ -301,6 +300,7 @@
{
unsigned long phys;
unsigned long offset = reloc_offset();
+ struct cpu_spec *spec;
/* Default */
phys = offset + KERNELBASE;
@@ -313,8 +313,10 @@
* Identify the CPU type and fix up code sections
* that depend on which cpu we have.
*/
- identify_cpu(offset, 0);
- do_cpu_ftr_fixups(offset);
+ spec = identify_cpu(offset);
+ do_feature_fixups(offset, spec->cpu_features,
+ PTRRELOC(&__start___ftr_fixup),
+ PTRRELOC(&__stop___ftr_fixup));
return phys;
}