USB: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 2e14fdd..74b889b 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -118,11 +118,11 @@
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+ dbg("%s - urb shutting down with status: %d", __func__,
status);
return;
default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__,
+ dbg("%s - nonzero urb status received: %d", __func__,
status);
goto exit;
}
@@ -183,7 +183,7 @@
if (result)
dev_err(&urb->dev->dev,
"%s - Error %d submitting control urb\n",
- __FUNCTION__, result);
+ __func__, result);
return;
}
@@ -214,7 +214,7 @@
port = mos7720_port->port;
- dbg("Entering...%s", __FUNCTION__);
+ dbg("Entering...%s", __func__);
data = urb->transfer_buffer;
@@ -362,7 +362,7 @@
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("%s-out of memory for urb buffers.", __FUNCTION__);
+ err("%s-out of memory for urb buffers.", __func__);
usb_free_urb(mos7720_port->write_urb_pool[j]);
mos7720_port->write_urb_pool[j] = NULL;
continue;
@@ -479,7 +479,7 @@
if (response)
dev_err(&port->dev,
"%s - Error %d submitting control urb\n",
- __FUNCTION__, response);
+ __func__, response);
}
/* set up our bulk in urb */
@@ -492,7 +492,7 @@
response = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (response)
dev_err(&port->dev,
- "%s - Error %d submitting read urb\n", __FUNCTION__, response);
+ "%s - Error %d submitting read urb\n", __func__, response);
/* initialize our icount structure */
memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount));
@@ -521,11 +521,11 @@
int chars = 0;
struct moschip_port *mos7720_port;
- dbg("%s:entering ...........", __FUNCTION__);
+ dbg("%s:entering ...........", __func__);
mos7720_port = usb_get_serial_port_data(port);
if (mos7720_port == NULL) {
- dbg("%s:leaving ...........", __FUNCTION__);
+ dbg("%s:leaving ...........", __func__);
return -ENODEV;
}
@@ -533,7 +533,7 @@
if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status == -EINPROGRESS)
chars += URB_TRANSFER_BUFFER_SIZE;
}
- dbg("%s - returns %d", __FUNCTION__, chars);
+ dbg("%s - returns %d", __func__, chars);
return chars;
}
@@ -585,7 +585,7 @@
mutex_unlock(&serial->disc_mutex);
mos7720_port->open = 0;
- dbg("Leaving %s", __FUNCTION__);
+ dbg("Leaving %s", __func__);
}
static void mos7720_break(struct usb_serial_port *port, int break_state)
@@ -594,7 +594,7 @@
struct usb_serial *serial;
struct moschip_port *mos7720_port;
- dbg("Entering %s", __FUNCTION__);
+ dbg("Entering %s", __func__);
serial = port->serial;
@@ -627,11 +627,11 @@
int room = 0;
int i;
- dbg("%s:entering ...........", __FUNCTION__);
+ dbg("%s:entering ...........", __func__);
mos7720_port = usb_get_serial_port_data(port);
if (mos7720_port == NULL) {
- dbg("%s:leaving ...........", __FUNCTION__);
+ dbg("%s:leaving ...........", __func__);
return -ENODEV;
}
@@ -640,7 +640,7 @@
room += URB_TRANSFER_BUFFER_SIZE;
}
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return room;
}
@@ -657,7 +657,7 @@
struct urb *urb;
const unsigned char *current_position = data;
- dbg("%s:entering ...........", __FUNCTION__);
+ dbg("%s:entering ...........", __func__);
serial = port->serial;
@@ -679,7 +679,7 @@
}
if (urb == NULL) {
- dbg("%s - no more free urbs", __FUNCTION__);
+ dbg("%s - no more free urbs", __func__);
goto exit;
}
@@ -687,14 +687,14 @@
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (urb->transfer_buffer == NULL) {
- err("%s no more kernel memory...", __FUNCTION__);
+ err("%s no more kernel memory...", __func__);
goto exit;
}
}
transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE);
memcpy(urb->transfer_buffer, current_position, transfer_size);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size,
+ usb_serial_debug_data(debug, &port->dev, __func__, transfer_size,
urb->transfer_buffer);
/* fill urb with data and submit */
@@ -708,7 +708,7 @@
status = usb_submit_urb(urb,GFP_ATOMIC);
if (status) {
err("%s - usb_submit_urb(write bulk) failed with status = %d",
- __FUNCTION__, status);
+ __func__, status);
bytes_sent = status;
goto exit;
}
@@ -724,7 +724,7 @@
struct tty_struct *tty;
int status;
- dbg("%s- port %d\n", __FUNCTION__, port->number);
+ dbg("%s- port %d\n", __func__, port->number);
mos7720_port = usb_get_serial_port_data(port);
@@ -736,11 +736,11 @@
return;
}
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
tty = port->tty;
if (!tty) {
- dbg("%s - no tty available", __FUNCTION__);
+ dbg("%s - no tty available", __func__);
return;
}
@@ -773,15 +773,15 @@
return;
if (!mos7720_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
tty = port->tty;
if (!tty) {
- dbg("%s - no tty available", __FUNCTION__);
+ dbg("%s - no tty available", __func__);
return;
}
@@ -922,7 +922,7 @@
__u16 round;
- dbg("%s - %d", __FUNCTION__, baudrate);
+ dbg("%s - %d", __func__, baudrate);
for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
if (divisor_table[i].baudrate == baudrate) {
@@ -973,15 +973,15 @@
port = mos7720_port->port;
serial = port->serial;
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
number = port->number - port->serial->minor;
- dbg("%s - port = %d, baud = %d", __FUNCTION__, port->number, baudrate);
+ dbg("%s - port = %d, baud = %d", __func__, port->number, baudrate);
/* Calculate the Divisor */
status = calc_baud_rate_divisor(baudrate, &divisor);
if (status) {
- err("%s - bad baud rate", __FUNCTION__);
+ err("%s - bad baud rate", __func__);
return status;
}
@@ -1034,16 +1034,16 @@
serial = port->serial;
port_number = port->number - port->serial->minor;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!mos7720_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
tty = mos7720_port->port->tty;
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
lData = UART_LCR_WLEN8;
lStop = 0x00; /* 1 stop bit */
@@ -1078,14 +1078,14 @@
if (cflag & PARENB) {
if (cflag & PARODD) {
lParity = UART_LCR_PARITY;
- dbg("%s - parity = odd", __FUNCTION__);
+ dbg("%s - parity = odd", __func__);
} else {
lParity = (UART_LCR_EPAR | UART_LCR_PARITY);
- dbg("%s - parity = even", __FUNCTION__);
+ dbg("%s - parity = even", __func__);
}
} else {
- dbg("%s - parity = none", __FUNCTION__);
+ dbg("%s - parity = none", __func__);
}
if (cflag & CMSPAR)
@@ -1094,10 +1094,10 @@
/* Change the Stop bit */
if (cflag & CSTOPB) {
lStop = UART_LCR_STOP;
- dbg("%s - stop bits = 2", __FUNCTION__);
+ dbg("%s - stop bits = 2", __func__);
} else {
lStop = 0x00;
- dbg("%s - stop bits = 1", __FUNCTION__);
+ dbg("%s - stop bits = 1", __func__);
}
#define LCR_BITS_MASK 0x03 /* Mask for bits/char field */
@@ -1171,7 +1171,7 @@
return;
}
- dbg("%s - baud rate = %d", __FUNCTION__, baud);
+ dbg("%s - baud rate = %d", __func__, baud);
status = send_cmd_write_baud_rate(mos7720_port, baud);
/* FIXME: needs to write actual resulting baud back not just
blindly do so */
@@ -1217,7 +1217,7 @@
if (!mos7720_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
@@ -1225,15 +1225,15 @@
cflag = tty->termios->c_cflag;
- dbg("%s - cflag %08x iflag %08x", __FUNCTION__,
+ dbg("%s - cflag %08x iflag %08x", __func__,
tty->termios->c_cflag,
RELEVANT_IFLAG(tty->termios->c_iflag));
- dbg("%s - old cflag %08x old iflag %08x", __FUNCTION__,
+ dbg("%s - old cflag %08x old iflag %08x", __func__,
old_termios->c_cflag,
RELEVANT_IFLAG(old_termios->c_iflag));
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* change the port settings to the new ones specified */
change_port_settings(mos7720_port, old_termios);
@@ -1271,7 +1271,7 @@
count = mos7720_chars_in_buffer(mos7720_port->port);
if (count == 0) {
- dbg("%s -- Empty", __FUNCTION__);
+ dbg("%s -- Empty", __func__);
result = TIOCSER_TEMT;
}
@@ -1296,7 +1296,7 @@
result = tty->read_cnt;
- dbg("%s(%d) = %d", __FUNCTION__, mos7720_port->port->number, result);
+ dbg("%s(%d) = %d", __func__, mos7720_port->port->number, result);
if (copy_to_user(value, &result, sizeof(int)))
return -EFAULT;
@@ -1374,7 +1374,7 @@
| ((msr & UART_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
- dbg("%s -- %x", __FUNCTION__, result);
+ dbg("%s -- %x", __func__, result);
if (copy_to_user(value, &result, sizeof(int)))
return -EFAULT;
@@ -1418,45 +1418,45 @@
if (mos7720_port == NULL)
return -ENODEV;
- dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
switch (cmd) {
case TIOCINQ:
/* return number of bytes available */
- dbg("%s (%d) TIOCINQ", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCINQ", __func__, port->number);
return get_number_bytes_avail(mos7720_port,
(unsigned int __user *)arg);
break;
case TIOCSERGETLSR:
- dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
return get_lsr_info(mos7720_port, (unsigned int __user *)arg);
return 0;
case TIOCMBIS:
case TIOCMBIC:
case TIOCMSET:
- dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__,
+ dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__,
port->number);
return set_modem_info(mos7720_port, cmd,
(unsigned int __user *)arg);
case TIOCMGET:
- dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCMGET", __func__, port->number);
return get_modem_info(mos7720_port,
(unsigned int __user *)arg);
case TIOCGSERIAL:
- dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
return get_serial_info(mos7720_port,
(struct serial_struct __user *)arg);
case TIOCSSERIAL:
- dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCSSERIAL", __func__, port->number);
break;
case TIOCMIWAIT:
- dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
cprev = mos7720_port->icount;
while (1) {
if (signal_pending(current))
@@ -1490,7 +1490,7 @@
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
- dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__,
+ dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
port->number, icount.rx, icount.tx );
if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
return -EFAULT;
@@ -1508,7 +1508,7 @@
int i;
char data;
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
if (!serial) {
dbg("Invalid Handler");
@@ -1520,7 +1520,7 @@
/* create our private serial structure */
mos7720_serial = kzalloc(sizeof(struct moschip_serial), GFP_KERNEL);
if (mos7720_serial == NULL) {
- err("%s - Out of memory", __FUNCTION__);
+ err("%s - Out of memory", __func__);
return -ENOMEM;
}
@@ -1533,7 +1533,7 @@
for (i = 0; i < serial->num_ports; ++i) {
mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
if (mos7720_port == NULL) {
- err("%s - Out of memory", __FUNCTION__);
+ err("%s - Out of memory", __func__);
usb_set_serial_data(serial, NULL);
kfree(mos7720_serial);
return -ENOMEM;
@@ -1617,7 +1617,7 @@
{
int retval;
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
/* Register with the usb serial */
retval = usb_serial_register(&moschip7720_2port_driver);